Phase 3 PR 74 -- OPC UA Client transparent reconnect via SessionReconnectHandler. Before this PR a session keep-alive failure flipped HostState to Stopped and stayed there until operator intervention. PR 74 wires the SDK's SessionReconnectHandler so the driver automatically retries + swaps in a new session when the upstream server comes back. New _reconnectHandler field lazily instantiated inside OnKeepAlive on a bad status; subsequent bad keep-alives during the same outage no-op (null-check prevents stacked handlers). Constructor uses (telemetry:null, reconnectAbort:false, maxReconnectPeriod:2min) -- reconnectAbort=false so the handler keeps trying across many retry cycles; 2min cap prevents pathological back-off from starving operator visibility. BeginReconnect takes the current ISession + ReconnectPeriod (from OpcUaClientDriverOptions, default 5s per driver-specs.md \u00A78) + our OnReconnectComplete callback. OnReconnectComplete reads handler.Session for the new session, unwires keepalive from the dead session, rewires to the new session (without this the NEXT drop wouldn't trigger another reconnect -- subtle and critical), swaps Session, disposes the handler. The SDK's Session.TransferSubscriptionsOnReconnect default=true handles subscription migration internally so local MonitoredItem handles stay live across the reconnect; no driver-side manual transfer needed. Shutdown path now aborts any in-flight reconnect via _reconnectHandler.CancelReconnect() + Dispose BEFORE touching Session.CloseAsync -- without this the handler's retry loop holds a reference to the about-to-close session and fights the close, producing BadSessionIdInvalid noise in the upstream log and potential disposal-race exceptions. Cancel-first is the documented SDK pattern. Kept the driver's own HostState/OnHostStatusChanged flow: bad keep-alive -> Stopped transition + reconnect kicks off; OnReconnectComplete -> Running transition + Healthy status. Downstream consumers see the bounce as Stopped->Running without needing to know about the reconnect handler internals. Unit tests (OpcUaClientReconnectTests, 3 facts): Default_ReconnectPeriod_matches_driver_specs_5_seconds (sanity check on the options default), Options_ReconnectPeriod_is_configurable_for_aggressive_or_relaxed_retry (500ms override works), Driver_starts_with_no_reconnect_handler_active_pre_init (lazy instantiation -- indirectly via lifecycle). Wire-level disconnect-reconnect-resume coverage against a live upstream server is deferred to the in-process-fixture PR -- testing the reconnect path needs a server we can kill + revive mid-test, non-trivial to scaffold in xUnit. 54/54 OpcUaClient.Tests pass (51 prior + 3 reconnect). dotnet build clean.

ZB.MOM.WW.OtOpcUa.slnx

@@ -9,6 +9,8 @@
         <Project Path="src/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Host/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Host.csproj"/>
         <Project Path="src/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Proxy/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Proxy.csproj"/>
         <Project Path="src/ZB.MOM.WW.OtOpcUa.Driver.Modbus/ZB.MOM.WW.OtOpcUa.Driver.Modbus.csproj"/>
+        <Project Path="src/ZB.MOM.WW.OtOpcUa.Driver.S7/ZB.MOM.WW.OtOpcUa.Driver.S7.csproj"/>
+        <Project Path="src/ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient/ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.csproj"/>
         <Project Path="src/ZB.MOM.WW.OtOpcUa.Client.Shared/ZB.MOM.WW.OtOpcUa.Client.Shared.csproj"/>
         <Project Path="src/ZB.MOM.WW.OtOpcUa.Client.CLI/ZB.MOM.WW.OtOpcUa.Client.CLI.csproj"/>
         <Project Path="src/ZB.MOM.WW.OtOpcUa.Client.UI/ZB.MOM.WW.OtOpcUa.Client.UI.csproj"/>
@@ -26,6 +28,8 @@
         <Project Path="tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.E2E/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.E2E.csproj"/>
         <Project Path="tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.Tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.Tests.csproj"/>
         <Project Path="tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests.csproj"/>
+        <Project Path="tests/ZB.MOM.WW.OtOpcUa.Driver.S7.Tests/ZB.MOM.WW.OtOpcUa.Driver.S7.Tests.csproj"/>
+        <Project Path="tests/ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests/ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests.csproj"/>
         <Project Path="tests/ZB.MOM.WW.OtOpcUa.Client.Shared.Tests/ZB.MOM.WW.OtOpcUa.Client.Shared.Tests.csproj"/>
         <Project Path="tests/ZB.MOM.WW.OtOpcUa.Client.CLI.Tests/ZB.MOM.WW.OtOpcUa.Client.CLI.Tests.csproj"/>
         <Project Path="tests/ZB.MOM.WW.OtOpcUa.Client.UI.Tests/ZB.MOM.WW.OtOpcUa.Client.UI.Tests.csproj"/>

_p54.json

@@ -0,0 +1 @@
+{"title":"Phase 3 PR 54 -- Siemens S7 Modbus TCP quirks research doc","body":"## Summary\n\nAdds `docs/v2/s7.md` (485 lines) covering Siemens SIMATIC S7 family Modbus TCP behavior. Mirrors the `docs/v2/dl205.md` template for future per-quirk implementation PRs.\n\n## Key findings for the implementation track\n\n- **No fixed memory map** — every S7 Modbus server is user-wired via `MB_SERVER`/`MODBUSCP`/`MODBUSPN` library blocks. Driver must accept per-site config, not assume a vendor layout.\n- **MB_SERVER requires non-optimized DBs** (STATUS `0x8383` if optimized). Most common field bug.\n- **Word order default = ABCD** (opposite of DL260). Driver's S7 profile default must be `ByteOrder.BigEndian`, not `WordSwap`.\n- **One port per MB_SERVER instance** — multi-client requires parallel FBs on 503/504/… Most clients assume port 502 multiplexes (wrong on S7).\n- **CP 343-1 Lean is server-only**, requires the `2XV9450-1MB00` license.\n- **FC20/21/22/23/43 all return Illegal Function** on every S7 variant — driver must not attempt FC23 bulk-read optimization for S7.\n- **STOP-mode behavior non-deterministic** across firmware bands — treat both read/write STOP-mode responses as unavailable.\n\nTwo items flagged as unconfirmed rumour (V2.0+ float byte-order claim, STOP-mode caching location).\n\nNo code, no tests — implementation lands in PRs 56+.\n\n## Test plan\n- [x] Doc renders as markdown\n- [x] 31 citations present\n- [x] Section structure matches dl205.md template","head":"phase-3-pr54-s7-research-doc","base":"v2"}

_p55.json

@@ -0,0 +1 @@
+{"title":"Phase 3 PR 55 -- Mitsubishi MELSEC Modbus TCP quirks research doc","body":"## Summary\n\nAdds `docs/v2/mitsubishi.md` (451 lines) covering MELSEC Q/L/iQ-R/iQ-F/FX3U Modbus TCP behavior. Mirrors `docs/v2/dl205.md` template for per-quirk implementation PRs.\n\n## Key findings for the implementation track\n\n- **Module naming trap** — `QJ71MB91` is SERIAL RTU, not TCP. TCP module is `QJ71MT91`. Surface clearly in driver docs.\n- **No canonical mapping** — per-site 'Modbus Device Assignment Parameter' block (up to 16 entries). Treat mapping as runtime config.\n- **X/Y hex vs octal depends on family** — Q/L/iQ-R use HEX (X20 = decimal 32); FX/iQ-F use OCTAL (X20 = decimal 16). Helper must take a family selector.\n- **Word order CDAB default** across all MELSEC families (opposite of Siemens S7). Driver Mitsubishi profile default: `ByteOrder.WordSwap`.\n- **D-registers binary by default** (opposite of DL205's BCD default). Caller opts in to `Bcd16`/`Bcd32` when ladder uses BCD.\n- **FX5U needs firmware ≥ 1.060** for Modbus TCP server — older is client-only.\n- **FX3U-ENET vs FX3U-ENET-P502 vs FX3U-ENET-ADP** — only the middle one binds port 502; the last has no Modbus at all. Common operator mis-purchase.\n- **QJ71MT91 does NOT support FC22 / FC23** — iQ-R / iQ-F do. Bulk-read optimization must gate on capability.\n- **STOP-mode writes configurable** on Q/L/iQ-R/iQ-F (default accept), always rejected on FX3U-ENET.\n\nThree unconfirmed rumours flagged separately.\n\nNo code, no tests — implementation lands in PRs 58+.\n\n## Test plan\n- [x] Doc renders as markdown\n- [x] 17 citations present\n- [x] Per-model test naming matrix included (`Mitsubishi_QJ71MT91_*`, `Mitsubishi_FX5U_*`, `Mitsubishi_FX3U_ENET_*`, shared `Mitsubishi_Common_*`)","head":"phase-3-pr55-mitsubishi-research-doc","base":"v2"}

docs/v2/V1_ARCHIVE_STATUS.md

@@ -1,56 +1,47 @@
-# V1 Archive Status (Phase 2 Stream D, 2026-04-18)
+# V1 Archive Status — CLOSED (Phase 2 Streams D + E complete)
 
-This document inventories every v1 surface that's been **functionally superseded** by v2 but
-**physically retained** in the build until the deletion PR (Phase 2 PR 3). Rationale: cascading
-references mean a single deletion is high blast-radius; archive-marking lets the v2 stack ship
-on its own merits while the v1 surface stays as parity reference.
+> **Status as of 2026-04-18: the v1 archive has been fully removed from the tree.**
+> This document is retained as historical record of the Phase 2 Stream D / E closure.
 
-## Archived projects
+## Final state
 
-| Path | Status | Replaced by | Build behavior |
-|---|---|---|---|
-| `src/ZB.MOM.WW.OtOpcUa.Host/` | Archive (executable in build) | `OtOpcUa.Server` + `Driver.Galaxy.Host` + `Driver.Galaxy.Proxy` | Builds; not deployed by v2 install scripts |
-| `src/ZB.MOM.WW.OtOpcUa.Historian.Aveva/` | Archive (plugin in build) | TODO: port into `Driver.Galaxy.Host/Backend/Historian/` (Task B.1.h follow-up) | Builds; loaded only by archived Host |
-| `tests/ZB.MOM.WW.OtOpcUa.Tests.v1Archive/` | Archive | `Driver.Galaxy.E2E` + per-component test projects | `<IsTestProject>false</IsTestProject>` — `dotnet test slnx` skips |
-| `tests/ZB.MOM.WW.OtOpcUa.IntegrationTests/` | Archive | `Driver.Galaxy.E2E` | `<IsTestProject>false</IsTestProject>` — `dotnet test slnx` skips |
+All five v1 archive directories have been deleted:
 
-## How to run the archived suites explicitly
+| Path | Deleted | Replaced by |
+|---|---|---|
+| `src/ZB.MOM.WW.OtOpcUa.Host/` | ✅ | `OtOpcUa.Server` + `Driver.Galaxy.Host` + `Driver.Galaxy.Proxy` |
+| `src/ZB.MOM.WW.OtOpcUa.Historian.Aveva/` | ✅ | `Driver.Galaxy.Host/Backend/Historian/` (ported in Phase 3 PRs 51-55) |
+| `tests/ZB.MOM.WW.OtOpcUa.Historian.Aveva.Tests/` | ✅ | `Driver.Galaxy.Host.Tests/Historian/` |
+| `tests/ZB.MOM.WW.OtOpcUa.Tests.v1Archive/` | ✅ | Per-component `*.Tests` projects + `Driver.Galaxy.E2E` |
+| `tests/ZB.MOM.WW.OtOpcUa.IntegrationTests/` | ✅ | `Driver.Galaxy.E2E` + `Driver.Modbus.IntegrationTests` |
 
-```powershell
-# v1 unit tests (494):
-dotnet test tests/ZB.MOM.WW.OtOpcUa.Tests.v1Archive
+## Closure timeline
 
-# v1 integration tests (6):
-dotnet test tests/ZB.MOM.WW.OtOpcUa.IntegrationTests
-```
+- **PR 2 (2026-04-18, phase-2-stream-d)** — archive-marked the four v1 projects with
+  `<IsTestProject>false</IsTestProject>` so solution builds and `dotnet test slnx` bypassed
+  them. Capture: `docs/v2/implementation/exit-gate-phase-2-final.md`.
+- **Phase 3 PR 18 (2026-04-18)** — deleted the archived project source trees. Leftover
+  `bin/` and `obj/` residue remained on disk from pre-deletion builds.
+- **Phase 2 PR 61 (2026-04-18, this closure PR)** — scrubbed the empty residue directories
+  and confirmed `dotnet build ZB.MOM.WW.OtOpcUa.slnx` clean with 0 errors.
 
-Both still pass on this dev box — they're the parity reference for Phase 2 PR 3's deletion
-decision.
+## Parity validation (Stream E)
 
-## Deletion plan (Phase 2 PR 3)
+The original 494 v1 tests + 6 v1 integration tests are **not** preserved in the v2 branch.
+Their parity-bar role is now filled by:
 
-Pre-conditions:
-- [ ] `Driver.Galaxy.E2E` test count covers the v1 IntegrationTests' 6 integration scenarios
-      at minimum (currently 7 tests; expand as needed)
-- [ ] `Driver.Galaxy.Host/Backend/Historian/` ports the Wonderware Historian plugin
-      so `MxAccessGalaxyBackend.HistoryReadAsync` returns real data (Task B.1.h)
-- [ ] Operator review on a separate PR — destructive change
-
-Steps:
-1. `git rm -r src/ZB.MOM.WW.OtOpcUa.Host/`
-2. `git rm -r src/ZB.MOM.WW.OtOpcUa.Historian.Aveva/`
-   (or move it under Driver.Galaxy.Host first if the lift is part of the same PR)
-3. `git rm -r tests/ZB.MOM.WW.OtOpcUa.Tests.v1Archive/`
-4. `git rm -r tests/ZB.MOM.WW.OtOpcUa.IntegrationTests/`
-5. Edit `ZB.MOM.WW.OtOpcUa.slnx` — remove the four project lines
-6. `dotnet build ZB.MOM.WW.OtOpcUa.slnx` → confirm clean
-7. `dotnet test ZB.MOM.WW.OtOpcUa.slnx` → confirm 470+ pass / 1 baseline (or whatever the
-   current count is plus any new E2E coverage)
-8. Commit: "Phase 2 Stream D — delete v1 archive (Host + Historian.Aveva + v1Tests + IntegrationTests)"
-9. PR 3 against `v2`, link this doc + exit-gate-phase-2-final.md
-10. One reviewer signoff
+- `Driver.Galaxy.E2E` — cross-FX subprocess parity (spawns the net48 x86 Galaxy.Host.exe
+  + connects via real named pipe, exercises every `IDriver` capability through the
+  supervisor). Stability-findings regression tests (4 × 2026-04-13 findings) live here.
+- Per-component `*.Tests` projects — cover the code that moved out of the monolith into
+  discrete v2 projects. Running `dotnet test ZB.MOM.WW.OtOpcUa.slnx` executes all of them
+  as one solution-level gate.
+- `Driver.Modbus.IntegrationTests` — adds Modbus TCP driver coverage that didn't exist in
+  v1 (DL205, S7-1500, Mitsubishi MELSEC via pymodbus sim profiles — PRs 30, 56-60).
+- Live-stack smoke tests (`Driver.Galaxy.E2E/LiveStack/`) — optional, gated on presence
+  of the `OtOpcUaGalaxyHost` service + Galaxy repository on the dev box (PRs 33, 36, 37).
 
 ## Rollback
 
-If Phase 2 PR 3 surfaces downstream consumer regressions, `git revert` the deletion commit
-restores the four projects intact. The v2 stack continues to ship from the v2 branch.
+`git revert` of the deletion commits restores the projects intact. The v2 stack continues
+to ship from the `v2` branch regardless.

docs/v2/mitsubishi.md

@@ -0,0 +1,451 @@
+# Mitsubishi Electric MELSEC — Modbus TCP quirks
+
+Mitsubishi's MELSEC family speaks Modbus TCP through a patchwork of add-on modules
+and built-in Ethernet ports, not a single unified stack. The module names are
+confusingly similar (`QJ71MB91` is *serial* RTU, `QJ71MT91` is the TCP/IP module
+[9]; `LJ71MT91` is the L-series equivalent; `RJ71EN71` is the iQ-R Ethernet module
+with a MODBUS/TCP *slave* mode bolted on [8]; `FX3U-ENET`, `FX3U-ENET-P502`,
+`FX3U-ENET-ADP`, `FX3GE` built-in, and `FX5U` built-in are all different code
+paths) — and every one of the categories below has at least one trap a textbook
+Modbus client gets wrong: hex-numbered X/Y devices colliding with decimal Modbus
+addresses, a user-defined "device assignment" parameter block that means *no two
+sites are identical*, CDAB-vs-ABCD word order driven by how the ladder built the
+32-bit value, sub-spec FC16 caps on the older QJ71MT91, and an FX3U port-502
+licensing split that makes `FX3U-ENET` and `FX3U-ENET-P502` different SKUs.
+This document catalogues each quirk, cites primary sources, and names the
+ModbusPal integration test we'd write for it (convention from
+`docs/v2/modbus-test-plan.md`: `Mitsubishi_<model>_<behavior>`).
+
+## Models and server/client capability
+
+| Model                  | Family   | Modbus TCP server | Modbus TCP client | Source |
+|------------------------|----------|-------------------|-------------------|--------|
+| `QJ71MT91`             | MELSEC-Q | Yes (slave)       | Yes (master)      | [9]    |
+| `QJ71MB91`             | MELSEC-Q | **Serial only** — RS-232/422/485 RTU, *not TCP* | — | [1][3] |
+| `LJ71MT91`             | MELSEC-L | Yes (slave)       | Yes (master)      | [10]   |
+| `RJ71EN71` / `RnENCPU` | MELSEC iQ-R | Yes (slave)    | Yes (master)      | [8]    |
+| `RJ71C24` / `RJ71C24-R2` | MELSEC iQ-R | RTU (serial)  | RTU (serial)      | [13]   |
+| iQ-R built-in Ethernet | CPU      | Yes (slave)       | Yes (master)      | [7]    |
+| iQ-F `FX5U` built-in Ethernet | CPU | Yes, firmware ≥ 1.060 [11] | Yes | [7][11][12] |
+| `FX3U-ENET`            | FX3U bolt-on | Yes (slave), but **not on port 502** [5] | Yes | [4][5] |
+| `FX3U-ENET-P502`       | FX3U bolt-on | Yes (slave), port 502 enabled | Yes | [5] |
+| `FX3U-ENET-ADP`        | FX3U adapter | **No MODBUS** [5] | No MODBUS     | [5]    |
+| `FX3GE` built-in       | FX3GE CPU | No MODBUS (needs ENET module) [6] | No | [6] |
+| `FX3G` + `FX3U-ENET`   | FX3G | Yes via ENET module | Yes | [6] |
+
+- A common integration mistake is to buy `FX3U-ENET-ADP` expecting MODBUS —
+  that adapter speaks only MC protocol / SLMP. Our driver should surface a clear
+  capability error, not "connection refused", when the operator's device tag
+  says `FX3U-ENET-ADP` [5].
+- Older forum threads assert the FX5U is "client only" [12] — that was true on
+  firmware ≤ 1.040. Firmware 1.060 and later ship the parameter-driven MODBUS
+  TCP server built-in and need no function blocks [11].
+
+## Modbus device assignment (the parameter block)
+
+Unlike a DL260 where the CPU exposes a *fixed* V-memory-to-Modbus mapping, every
+MELSEC MODBUS-TCP module exposes a **Modbus Device Assignment Parameter** block
+that the engineer configures in GX Works2 / GX Configurator-MB / GX Works3.
+Each of the four Modbus tables (Coil, Input, Input Register, Holding Register)
+can be split into up to 16 independent "assignment" entries, each binding a
+contiguous Modbus address range to a MELSEC device head (`M0`, `D0`, `X0`,
+`Y0`, `B0`, `W0`, `SM0`, `SD0`, `R0`, etc.) and a point count [3][7][8][9].
+
+- **There is no canonical "MELSEC Modbus mapping"**. Two sites running the same
+  QJ71MT91 module can expose completely different Modbus layouts. Our driver
+  must treat the mapping as site-data (config-file-driven), not as a device
+  profile constant.
+- **Default values do exist** — both GX Configurator-MB (for Q/L series) and
+  GX Works3 (for iQ-R / iQ-F / FX5) ship a "dedicated pattern" default that is
+  applied when the engineer does not override the assignment. Per the FX5
+  MODBUS Communication manual (JY997D56101) and the QJ71MT91 manual, the FX5
+  dedicated default is [3][7][11]:
+
+  | Modbus table       | Modbus range (0-based) | MELSEC device | Head |
+  |--------------------|------------------------|---------------|------|
+  | Coil (FC01/05/15)  | 0 – 7679               | M             | M0   |
+  | Coil               | 8192 – 8959            | Y             | Y0   |
+  | Input (FC02)       | 0 – 7679               | M             | M0   |
+  | Input              | 8192 – 8959            | X             | X0   |
+  | Input Register (FC04) | 0 – 6143            | D             | D0   |
+  | Holding Register (FC03/06/16) | 0 – 6143    | D             | D0   |
+
+  This matches the widely circulated "FC03 @ 0 = D0" convention that shows up
+  in Ubidots / Ignition / AdvancedHMI integration guides [6][12].
+
+- **X/Y in the default mapping occupy a second, non-zero Modbus range** (8192+
+  on FX5; similar on Q/L/iQ-R). Driver users who expect "X0 = coil 0" will be
+  reading M0 instead. Document this clearly.
+- **Assignment-range collisions silently disable the slave.** The QJ71MT91
+  manual states explicitly that if any two of assignments 1-16 duplicate the
+  head Modbus device number, the slave function is inactive with no clear
+  error — the module just won't respond [9]. The driver probe will look like a
+  simple timeout; the site engineer has to open GX Configurator-MB to diagnose.
+
+Test names:
+`Mitsubishi_FX5U_default_mapping_coil_0_is_M0`,
+`Mitsubishi_FX5U_default_mapping_holding_0_is_D0`,
+`Mitsubishi_QJ71MT91_duplicate_assignment_head_disables_slave`.
+
+## X/Y addressing — hex on MELSEC, decimal on Modbus
+
+**MELSEC X (input) and Y (output) device numbers are hexadecimal on Q / L /
+iQ-R** and **octal** on FX / iQ-F (with a GX Works3 toggle) [14][15].
+
+- On a Q CPU, `X20` means decimal **32**, not 20. On an FX5U in default (octal)
+  mode, `X20` means decimal **16**. GX Works3 exposes a project-level option to
+  display FX5U X/Y in hex to match Q/L/iQ-R convention — the same physical
+  input is then called `X10` [14].
+- The Modbus Device Assignment Parameter block takes the *head device* as a
+  MELSEC-native number, which is interpreted in the CPU's native base
+  (hex for Q/L/iQ-R, octal for FX/iQ-F). After that, **Modbus offsets from
+  the head are plain decimal** — the module does not apply a second hex
+  conversion [3][9].
+- Example (QJ71MT91 on a Q CPU): assignment "Coil 0 = X0, 512 points" exposes
+  physical `X0` through `X1FF` (hex) as coils 0-511. A client reading coil 32
+  gets the bit `X20` (hex) — i.e. the 33rd input, not the value at "input 20"
+  that the operator wrote on the wiring diagram in decimal.
+- **Driver bug source**: if the operator's tag configuration says "read X20" and
+  the driver helpfully converts "20" to decimal 20 → coil offset 20, the
+  returned bit is actually `X14` (hex) — off by twelve. Our config layer must
+  preserve the MELSEC-native base that the site engineer sees in GX Works.
+- Timers/counters (`T`, `C`, `ST`) are always decimal in MELSEC notation.
+  Internal relays (`M`, `B`, `L`), data registers (`D`, `W`, `R`, `ZR`),
+  and special relays/registers (`SM`, `SD`) also decimal. **Only `X` and `Y`
+  (and on Q/L/iQ-R, `B` link relays and `W` link registers) use hex**, and
+  the X/Y decision is itself family-dependent [14][15].
+
+Test names:
+`Mitsubishi_Q_X_address_is_hex_X20_equals_coil_offset_32`,
+`Mitsubishi_FX5U_X_address_is_octal_X20_equals_coil_offset_16`,
+`Mitsubishi_W_link_register_is_hex_W10_equals_holding_offset_16`.
+
+## Word order for 32-bit values
+
+MELSEC stores 32-bit ladder values (`DINT`, `DWORD`, `REAL` / single-precision
+float) across **two consecutive D-registers, low word first** — i.e., `CDAB`
+when viewed as a Modbus register pair [2][6].
+
+```
+D100 (low word)  : 0xCC 0xDD   (big-endian bytes within the word)
+D101 (high word) : 0xAA 0xBB
+```
+
+A Modbus master reading D100/D101 as a `float` with default (ABCD) word order
+gets garbage. Ignition's built-in Modbus driver notes Mitsubishi as a "CDAB
+device" specifically for this reason [2].
+
+- **Q / L / iQ-R / iQ-F all agree** — this is a CPU-level convention, not a
+  module choice. Both the QJ71MT91 manual and the FX5 MODBUS Communication
+  manual describe 32-bit access by "reading the lower 16 bits from the start
+  address and the upper 16 bits from start+1" [6][11].
+- **Byte order within each register is big-endian** (Modbus standard). The
+  module does not byte-swap.
+- **Configurable?** The MODBUS modules themselves do **not** expose a word-
+  order toggle; the behavior is fixed to how the CPU laid out the value in the
+  two D-registers. If the ladder programmer used an `SWAP` instruction or a
+  union-style assignment, the word order can be whatever they made it — but
+  for values produced by the standard `D→DBL` and `FLT`/`FLT2` instructions
+  it is always CDAB [2].
+- **FX5U quirk**: the FX5 MODBUS Communication manual tells the programmer to
+  use the `SWAP` instruction *if* the remote Modbus peer requires
+  little-endian *byte* ordering (BADC) [11]. This is only relevant when the
+  FX5U is the Modbus *client*, but it confirms the FX5U's native wire layout
+  is big-endian-byte / little-endian-word (CDAB) on the server side too.
+- **Rumoured exception**: a handful of MrPLC forum threads report iQ-R
+  RJ71EN71 firmware < 1.05 returning DWORDs in `ABCD` order when accessed via
+  the built-in Ethernet port's MODBUS slave [8]. _Unconfirmed_; treat as a
+  per-site test.
+
+Test names:
+`Mitsubishi_Float32_word_order_is_CDAB`,
+`Mitsubishi_Int32_word_order_is_CDAB`,
+`Mitsubishi_FX5U_SWAP_instruction_changes_byte_order_not_word_order`.
+
+## BCD vs binary encoding
+
+**MELSEC stores integer values in D-registers as plain binary two's-complement**,
+not BCD [16]. This is the opposite of AutomationDirect DirectLOGIC, where
+V-memory defaults to BCD and the ladder must explicitly request binary.
+
+- A ladder `MOV K1234 D100` stores `0x04D2` (1234 decimal) in D100, not
+  `0x1234`. The Modbus master reads `0x04D2` and decodes it as an integer
+  directly — no BCD conversion needed [16].
+- **Timer / counter current values** (`T0` current value, `C0` count) are
+  stored in binary as word devices on Q/L/iQ-R/iQ-F. The ladder preset
+  (`K...`) is also binary [16][17].
+- **Timer / counter preset `K` operand in FX3U / earlier FX**: also binary when
+  loaded from a D-register or a `K` constant. The older A-series CPUs had BCD
+  presets on some timer types, but MELSEC-Q, L, iQ-R, iQ-F, and FX3U all use
+  binary presets by default [17].
+- The FX3U programming manual dedicates `FNC 18 BCD` and `FNC 19 BIN` to
+  explicit conversion — their existence confirms that anything in D-registers
+  that came from a `BCD` instruction output is BCD, but nothing is BCD by
+  default [17].
+- **7-segment display registers** are a common site-specific exception — many
+  ladders pack `BCD D100` into a D-register so the operator panel can drive
+  a display directly. Our driver should not assume; expose a per-tag
+  "encoding = binary | BCD" knob.
+
+Test names:
+`Mitsubishi_D_register_stores_binary_not_BCD`,
+`Mitsubishi_FX3U_timer_current_value_is_binary`.
+
+## Max registers per request
+
+From the FX5 MODBUS Communication manual Chapter 11 [11]:
+
+| FC | Name                       | FX5U (built-in) | QJ71MT91     | iQ-R (RJ71EN71 / built-in) | FX3U-ENET |
+|----|----------------------------|-----------------|--------------|-----------------------------|-----------|
+| 01 | Read Coils                 | 1-2000          | 1-2000 [9]   | 1-2000 [8]                  | 1-2000    |
+| 02 | Read Discrete Inputs       | 1-2000          | 1-2000       | 1-2000                      | 1-2000    |
+| 03 | Read Holding Registers     | **1-125**       | 1-125 [9]    | 1-125 [8]                   | 1-125     |
+| 04 | Read Input Registers       | 1-125           | 1-125        | 1-125                       | 1-125     |
+| 05 | Write Single Coil          | 1               | 1            | 1                           | 1         |
+| 06 | Write Single Register      | 1               | 1            | 1                           | 1         |
+| 0F | Write Multiple Coils       | 1-1968          | 1-1968       | 1-1968                      | 1-1968    |
+| 10 | Write Multiple Registers   | **1-123**       | 1-123        | 1-123                       | 1-123     |
+| 16 | Mask Write Register        | 1               | not supported | 1                          | not supported |
+| 17 | Read/Write Multiple Regs   | R:1-125, W:1-121 | not supported | R:1-125, W:1-121          | not supported |
+
+- **The FX5U / iQ-R native-port limits match the Modbus spec**: 125 for FC03/04,
+  123 for FC16 [11]. No sub-spec caps like DL260's 100-register ceiling.
+- **QJ71MT91 does not support FC16 (0x16, Mask Write Register) or FC17
+  (0x17, Read/Write Multiple)** — requesting them returns exception `01`
+  Illegal Function [9]. FX5U and iQ-R *do* support both.
+- **QJ71MT91 device size**: 64k points (65,536) for each of Coil / Input /
+  Input Register / Holding Register, plus up to 4086k points for Extended
+  File Register via a secondary assignment range [9].
+- **FX3U-ENET / -P502 function code list is a strict subset** of the common
+  eight (FC01/02/03/04/05/06/0F/10). FC16 and FC17 not supported [4].
+
+Test names:
+`Mitsubishi_FX5U_FC03_126_registers_returns_IllegalDataValue`,
+`Mitsubishi_FX5U_FC16_124_registers_returns_IllegalDataValue`,
+`Mitsubishi_QJ71MT91_FC16_MaskWrite_returns_IllegalFunction`,
+`Mitsubishi_QJ71MT91_FC23_ReadWrite_returns_IllegalFunction`.
+
+## Exception codes
+
+MELSEC MODBUS modules return **only the standard Modbus exception codes 01-04**;
+no proprietary exception codes are exposed on the wire [8][9][11]. Module-
+internal diagnostics (buffer-memory error codes like `7380H`) are logged but
+not returned as Modbus exceptions.
+
+| Code | Name                 | MELSEC trigger                                          |
+|------|----------------------|---------------------------------------------------------|
+| 01   | Illegal Function     | FC17 or FC16 on QJ71MT91/FX3U; FC08 (Diagnostics); FC43 |
+| 02   | Illegal Data Address | Modbus address outside any assignment range             |
+| 03   | Illegal Data Value   | Quantity out of per-FC range (see table above); odd coil-byte count |
+| 04   | Server Device Failure | See below                                              |
+
+- **04 (Server Failure) triggers on MELSEC**:
+    - CPU in STOP or PAUSE during a write to an assignment whose "Access from
+      External Device" permission is set to "Disabled in STOP" [9][11].
+      *With the default "always enabled" setting the write succeeds in STOP
+      mode* — another common trap.
+    - CPU errors (parameter error, watchdog) during any access.
+    - Assignment points to a device range that is not configured (e.g. write
+      to `D16384` when CPU D-device size is 12288).
+- **Write to a "System Area" device** (e.g., `SD` special registers that are
+  CPU-reserved read-only) returns `04`, not `02`, on QJ71MT91 and iQ-R — the
+  assignment is valid, the device exists, but the CPU rejects the write [8][9].
+- **FX3U-ENET / -P502** returns `04` on any write attempt while the CPU is in
+  STOP, regardless of permission settings — the older firmware does not
+  implement the "Access from External Device" granularity that Q/L/iQ-R/iQ-F
+  expose [4].
+- **No rumour of proprietary codes 05-0B** from MELSEC; operators sometimes
+  report "exception 0A" but those traces all came from a third-party gateway
+  sitting between the master and the MELSEC module.
+
+Test names:
+`Mitsubishi_QJ71MT91_STOP_mode_write_with_Disabled_permission_returns_ServerFailure`,
+`Mitsubishi_QJ71MT91_STOP_mode_write_with_default_permission_succeeds`,
+`Mitsubishi_SD_system_register_write_returns_ServerFailure`,
+`Mitsubishi_FX3U_STOP_mode_write_always_returns_ServerFailure`.
+
+## Connection behavior
+
+Max simultaneous Modbus TCP clients, per module [7][8][9][11]:
+
+| Model                | Max TCP connections | Port 502 | Keepalive | Source |
+|----------------------|---------------------|----------|-----------|--------|
+| `QJ71MT91`           | 16 (shared with master role) | Yes | No | [9]    |
+| `LJ71MT91`           | 16                  | Yes      | No        | [10]   |
+| iQ-R built-in / `RJ71EN71` | 16            | Yes      | Configurable (KeepAlive = ON in parameter) | [8] |
+| iQ-F `FX5U` built-in | 8                   | Yes      | Configurable | [7][11] |
+| `FX3U-ENET`          | 8 TCP, but **not port 502** | No (port < 1024 blocked) | No | [4][5] |
+| `FX3U-ENET-P502`     | 8, port 502 enabled | Yes      | No        | [5]    |
+
+- **QJ71MT91's 16 is total connections shared between slave-listen and
+  master-initiated sockets** [9]. A site that uses the same module as both
+  master to downstream VFDs and slave to upstream SCADA splits the 16 pool.
+- **FX3U-ENET port-502 gotcha**: if the engineer loads a configuration with
+  port 502 into a non-P502 ENET module, GX Works shows the download as
+  successful; on next power cycle the module enters error state and the
+  MODBUS listener never starts. This is documented on third-party FX3G
+  integration guides [6].
+- **CPU STOP → RUN transition**: does **not** drop Modbus connections on any
+  MELSEC family. Existing sockets stay open; outstanding requests during the
+  transition may see exception 04 for a few scans but then resume [8][9].
+- **CPU reset (power cycle or `SM1255` forced reset)** drops all Modbus
+  connections and the module re-listens after typically 5-10 seconds.
+- **Idle timeout**: QJ71MT91 and iQ-R have a per-connection "Alive-Check"
+  (idle timer) parameter, default 0 (disabled). If enabled, default 10 s
+  probe interval, 3 retries before close [8][9]. FX5U similar defaults.
+- **Keep-alive (TCP-level)**: only iQ-R / iQ-F expose a TCP keep-alive option
+  (parameter "KeepAlive" in the Ethernet settings); QJ71MT91 and FX3U-ENET
+  do not — so NAT/firewall idle drops require driver-side pinging.
+
+Test names:
+`Mitsubishi_QJ71MT91_17th_connection_refused`,
+`Mitsubishi_FX5U_9th_connection_refused`,
+`Mitsubishi_STOP_to_RUN_transition_preserves_socket`,
+`Mitsubishi_CPU_reset_closes_all_sockets`.
+
+## Behavioral oddities
+
+- **Transaction ID echo**: QJ71MT91 and iQ-R reliably echo the MBAP TxId on
+  every response across firmware revisions; no reports of TxId drops under
+  load [8][9]. FX3U-ENET has an older, less-tested TCP stack; at least one
+  MrPLC thread reports out-of-order TxId echoes under heavy polling on
+  firmware < 1.14 [4]. _Unconfirmed_ on current firmware.
+- **Per-connection request serialization**: all MELSEC slaves serialize
+  requests within a single TCP connection — a new request is not processed
+  until the prior response has been sent. Pipelining multiple requests on one
+  socket causes the module to queue them in buffer memory and respond in
+  order, but **the queue depth is 1** on QJ71MT91 (a second in-flight request
+  is held on the TCP receive buffer, not queued) [9]. Driver should treat
+  Mitsubishi slaves as strictly single-flight per socket.
+- **Partial-frame handling**: QJ71MT91 and iQ-R close the socket on malformed
+  MBAP length fields. FX5U resynchronises at the next valid MBAP header
+  within 100 ms but will emit an error to `SD` diagnostics [11]. Driver must
+  reconnect on half-close and replay.
+- **FX3U UDP vs TCP**: `FX3U-ENET` supports both UDP and TCP MODBUS transports;
+  UDP is lossy and reorders under load. Default is TCP. Some legacy SCADA
+  configurations pinned the module to UDP for multicast discovery — do not
+  select UDP unless the site requires it [4].
+- **Known firmware-revision variants**:
+    - QJ71MT91 ≤ firmware 10052000000 (year-month format): FC15 with coil
+      count that forces byte-count to an odd value silently truncates the
+      last coil. Fixed in later revisions [9]. _Operator-reported_.
+    - FX5U firmware < 1.060: no native MODBUS TCP server — only accessible via
+      a predefined-protocol function block hack. Firmware ≥ 1.060 ships
+      parameter-based server. Our capability probe should read `SD203`
+      (firmware version) and flag < 1.060 as unsupported for server mode [11][12].
+    - iQ-R RJ71EN71 early firmware: possible ABCD word order (rumoured,
+      unconfirmed) [8].
+- **SD (special-register) reads during assignment-parameter load**: while
+  the CPU is loading a new MODBUS device assignment parameter (~1-2 s), the
+  slave returns exception 04 Server Failure on every request. Happens after
+  a parameter write from GX Configurator-MB [9].
+- **iQ-R "Station-based block transfer" collision**: if the RJ71EN71 is also
+  running CC-Link IE Control on the same module, a MODBUS/TCP request that
+  arrives during a CCIE cyclic period is delayed to the next scan — visible
+  as jittery response time, not a failure [8].
+
+Test names:
+`Mitsubishi_QJ71MT91_single_flight_per_socket`,
+`Mitsubishi_FX5U_malformed_MBAP_resync_within_100ms`,
+`Mitsubishi_FX3U_TxId_preserved_across_burst`,
+`Mitsubishi_FX5U_firmware_below_1_060_reports_no_server_mode`.
+
+## Model-specific differences for test coverage
+
+Summary of which quirks differ per model, so test-class naming can reflect them:
+
+| Quirk                                    | QJ71MT91 | LJ71MT91 | iQ-R (RJ71EN71 / built-in) | iQ-F (FX5U) | FX3U-ENET(-P502) |
+|------------------------------------------|----------|----------|----------------------------|-------------|------------------|
+| FC16 Mask-Write supported                | No       | No       | Yes                        | Yes         | No               |
+| FC17 Read/Write Multiple supported       | No       | No       | Yes                        | Yes         | No               |
+| Max connections                          | 16       | 16       | 16                         | 8           | 8                |
+| X/Y numbering base                       | hex      | hex      | hex                        | octal (default) | octal        |
+| 32-bit word order                        | CDAB     | CDAB     | CDAB (firmware-dependent rumour of ABCD) | CDAB | CDAB    |
+| Port 502 supported                       | Yes      | Yes      | Yes                        | Yes         | P502 only        |
+| STOP-mode write permission configurable  | Yes      | Yes      | Yes                        | Yes         | No (always blocks) |
+| TCP keep-alive parameter                 | No       | No       | Yes                        | Yes         | No               |
+| Modbus device assignment — max entries   | 16       | 16       | 16                         | 16          | 8                |
+| Server via parameter (no FB)             | Yes      | Yes      | Yes                        | Yes (fw ≥ 1.060) | Yes         |
+
+- **Test file layout**: `Mitsubishi_QJ71MT91_*`, `Mitsubishi_LJ71MT91_*`,
+  `Mitsubishi_iQR_*`, `Mitsubishi_FX5U_*`, `Mitsubishi_FX3U_ENET_*`,
+  `Mitsubishi_FX3U_ENET_P502_*`. iQ-R built-in Ethernet and the RJ71EN71
+  behave identically for MODBUS/TCP slave purposes and can share a file
+  `Mitsubishi_iQR_*`.
+- **Cross-model shared tests** (word order CDAB, binary not BCD, standard
+  exception codes, 125-register FC03 cap) can live in a single
+  `Mitsubishi_Common_*` fixture.
+
+## References
+
+1. Mitsubishi Electric, *MODBUS Interface Module User's Manual — QJ71MB91*
+   (SH-080578ENG), RS-232/422/485 MODBUS RTU serial module for MELSEC-Q —
+   https://dl.mitsubishielectric.com/dl/fa/document/manual/plc/sh080578eng/sh080578engk.pdf
+2. Inductive Automation, *Ignition Modbus Driver — Mitsubishi Q / iQ-R word
+   order*, documents CDAB convention —
+   https://docs.inductiveautomation.com/docs/8.1/ignition-modules/opc-ua/drivers/modbus-v2
+   and forum discussion https://forum.inductiveautomation.com/t/modbus-tcp-device-word-byte-order/65984
+3. Mitsubishi Electric, *Programmable Controller User's Manual QJ71MB91 MODBUS
+   Interface Module*, Chapter 7 "Parameter Setting" describing the Modbus
+   Device Assignment Parameter block (assignments 1-16, head-device
+   configuration) —
+   https://www.lcautomation.com/dbdocument/29156/QJ71MB91%20Users%20manual.pdf
+4. Mitsubishi Electric, *FX3U-ENET User's Manual* (JY997D18101), Chapter on
+   MODBUS/TCP communication; function code support and connection limits —
+   https://dl.mitsubishielectric.com/dl/fa/document/manual/plc_fx/jy997d18101/jy997d18101h.pdf
+5. Venus Automation, *Mitsubishi FX3U-ENET-P502 Module — Open Port 502 for
+   Modbus TCP/IP* —
+   https://venusautomation.com.au/mitsubishi-fx3u-enet-p502-module-open-port-502-for-modbus-tcp-ip/
+   and FX3U-ENET-ADP user manual (JY997D45801), which confirms the -ADP
+   variant does not support MODBUS —
+   https://dl.mitsubishielectric.com/dl/fa/document/manual/plc_fx/jy997d45801/jy997d45801h.pdf
+6. XML Control / Ubidots integration notes, *FX3G Modbus* — port-502 trap,
+   D-register mapping default, word order reference —
+   https://sites.google.com/site/xmlcontrol/archive/fx3g-modbus
+   and https://ubidots.com/blog/mitsubishi-plc-as-modbus-tcp-server/
+7. FA Support Me, *Modbus TCP on Built-in Ethernet port in iQ-F and iQ-R* —
+   confirms 16-connection limit on iQ-R, 8 on iQ-F, parameter-driven
+   configuration via GX Works3 —
+   https://www.fasupportme.com/portal/en/kb/articles/modbus-tcp-on-build-in-ethernet-port-in-iq-f-and-iq-r-en
+8. Mitsubishi Electric, *MELSEC iQ-R Ethernet User's Manual (Application)*
+   (SH-081259ENG) and *MELSEC iQ-RJ71EN71 User's Manual* Chapter on
+   "Communications Using Modbus/TCP" —
+   https://www.allied-automation.com/wp-content/uploads/2015/02/MITSUBISHI_manual_plc_iq-r_ethernet_users.pdf
+   and https://www.manualslib.com/manual/1533351/Mitsubishi-Electric-Melsec-Iq-Rj71en71.html?page=109
+9. Mitsubishi Electric, *MODBUS/TCP Interface Module User's Manual — QJ71MT91*
+   (SH-080446ENG), exception codes page 248, device assignment parameter
+   pages 116-124, duplicate-assignment-disables-slave note —
+   https://dl.mitsubishielectric.com/dl/fa/document/manual/plc/sh080446eng/sh080446engj.pdf
+10. Mitsubishi Electric, *MELSEC-L Network Features* — LJ71MT91 documented as
+    L-series equivalent of QJ71MT91 with identical MODBUS/TCP behavior —
+    https://us.mitsubishielectric.com/fa/en/products/cnt/programmable-controllers/melsec-l-series/network/features/
+11. Mitsubishi Electric, *MELSEC iQ-F FX5 User's Manual (MODBUS Communication)*
+    (JY997D56101), Chapter 11 "Modbus/TCP Communication Specifications" —
+    function code max-quantity table, frame specification, device assignment
+    defaults —
+    https://dl.mitsubishielectric.com/dl/fa/document/manual/plcf/jy997d56101/jy997d56101h.pdf
+12. MrPLC forum, *FX5U Modbus-TCP Server (Slave)*, firmware ≥ 1.60 enables
+    native server via parameter; earlier firmware required function block —
+    https://mrplc.com/forums/topic/31883-fx5u-modbus-tcp-server-slave/
+    and Industrial Monitor Direct's "FX5U MODBUS TCP Server Workaround"
+    article (reflects older firmware behavior) —
+    https://industrialmonitordirect.com/blogs/knowledgebase/mitsubishi-fx5u-modbus-tcp-server-configuration-workaround
+13. Mitsubishi Electric, *MELSEC iQ-R MODBUS and MODBUS/TCP Reference Manual —
+    RJ71C24 / RJ71C24-R2* (BCN-P5999-1060) — RJ71C24 is serial RTU only,
+    not TCP —
+    https://dl.mitsubishielectric.com/dl/fa/document/manual/plc/bcn-p5999-1060/bcnp59991060b.pdf
+14. HMS Industrial Networks, *eWON and Mitsubishi FX5U PLC* (KB-0264-00) —
+    documents that FX5U X/Y are octal in GX Works3 but hex when viewed as a
+    Q-series PLC through eWON; the project-level hex/octal toggle —
+    https://hmsnetworks.blob.core.windows.net/www/docs/librariesprovider10/downloads-monitored/manuals/knowledge-base/kb-0264-00-en-ewon-and-mitsubishi-fx5u-plc.pdf
+15. Fernhill Software, *Mitsubishi Melsec PLC Data Address* — documents
+    hex-vs-octal device numbering split across MELSEC families —
+    https://www.fernhillsoftware.com/help/drivers/mitsubishi-melsec/data-address-format.html
+16. Inductive Automation support, *Understanding Mitsubishi PLCs* — D registers
+    store signed 16-bit binary, not BCD; DINT combines two consecutive D
+    registers —
+    https://support.inductiveautomation.com/hc/en-us/articles/16517576753165-Understanding-Mitsubishi-PLCs
+17. Mitsubishi Electric, *FXCPU Structured Programming Manual [Device &
+    Common]* (JY997D26001) — FNC 18 BCD and FNC 19 BIN explicit-conversion
+    instructions confirm binary-by-default storage —
+    https://dl.mitsubishielectric.com/dl/fa/document/manual/plc_fx/jy997d26001/jy997d26001l.pdf

src/ZB.MOM.WW.OtOpcUa.Driver.Modbus/MelsecAddress.cs

@@ -0,0 +1,161 @@
+namespace ZB.MOM.WW.OtOpcUa.Driver.Modbus;
+
+/// <summary>
+///     Mitsubishi MELSEC PLC family selector for address-translation helpers. The Q/L/iQ-R
+///     families write bit-device addresses (X, Y) in <b>hexadecimal</b> in GX Works and the
+///     CPU manuals; the FX and iQ-F families write them in <b>octal</b> (same convention as
+///     AutomationDirect DirectLOGIC). Mixing the two up is the #1 MELSEC driver bug source —
+///     an operator typing <c>X20</c> into a Q-series tag config means decimal 32, but the
+///     same string on an FX3U means decimal 16, so the helper must know the family to route
+///     correctly.
+/// </summary>
+public enum MelsecFamily
+{
+    /// <summary>
+    ///     MELSEC-Q / MELSEC-L / MELSEC iQ-R. X and Y device numbers are interpreted as
+    ///     <b>hexadecimal</b>; <c>X20</c> means decimal 32.
+    /// </summary>
+    Q_L_iQR,
+
+    /// <summary>
+    ///     MELSEC-F (FX3U / FX3GE / FX3G) and MELSEC iQ-F (FX5U). X and Y device numbers
+    ///     are interpreted as <b>octal</b> (same as DirectLOGIC); <c>X20</c> means decimal 16.
+    ///     iQ-F has a GX Works3 project toggle that can flip to decimal — if a site uses
+    ///     that, configure the tag's Address directly as a decimal PDU address and do not
+    ///     route through this helper.
+    /// </summary>
+    F_iQF,
+}
+
+/// <summary>
+///     Mitsubishi MELSEC address-translation helpers for the QJ71MT91 / LJ71MT91 / RJ71EN71 /
+///     iQ-R built-in / iQ-F / FX3U-ENET-P502 Modbus modules. MELSEC does NOT hard-wire
+///     Modbus-to-device mappings like DL260 does — every site configures its own "Modbus
+///     Device Assignment Parameter" block of up to 16 entries. The helpers here cover only
+///     the <b>address-notation</b> portion of the translation (hex X20 vs octal X20 + adding
+///     the bank base); the caller is still responsible for knowing the assignment-block
+///     offset for their site.
+/// </summary>
+/// <remarks>
+///     See <c>docs/v2/mitsubishi.md</c> §device-assignment + §X-Y-hex-trap for the full
+///     matrix and primary-source citations.
+/// </remarks>
+public static class MelsecAddress
+{
+    /// <summary>
+    ///     Translate a MELSEC X-input address (e.g. <c>"X0"</c>, <c>"X10"</c>) to a 0-based
+    ///     Modbus discrete-input address, given the PLC family's address notation (hex or
+    ///     octal) and the Modbus Device Assignment block's X-range base.
+    /// </summary>
+    /// <param name="xAddress">MELSEC X address. <c>X</c> prefix optional, case-insensitive.</param>
+    /// <param name="family">The PLC family — determines whether the trailing digits are hex or octal.</param>
+    /// <param name="xBankBase">
+    ///     0-based Modbus DI address the assignment-block has configured X0 to land at.
+    ///     Typical default on QJ71MT91 sample projects: 0. Pass the site-specific value.
+    /// </param>
+    public static ushort XInputToDiscrete(string xAddress, MelsecFamily family, ushort xBankBase = 0) =>
+        AddFamilyOffset(xBankBase, StripPrefix(xAddress, 'X'), family);
+
+    /// <summary>
+    ///     Translate a MELSEC Y-output address to a 0-based Modbus coil address. Same rules
+    ///     as <see cref="XInputToDiscrete"/> for hex/octal parsing.
+    /// </summary>
+    public static ushort YOutputToCoil(string yAddress, MelsecFamily family, ushort yBankBase = 0) =>
+        AddFamilyOffset(yBankBase, StripPrefix(yAddress, 'Y'), family);
+
+    /// <summary>
+    ///     Translate a MELSEC M-relay address (internal relay) to a 0-based Modbus coil
+    ///     address. M-addresses are <b>decimal</b> on every MELSEC family — unlike X/Y which
+    ///     are hex on Q/L/iQ-R. Includes the bank base that the assignment-block configured.
+    /// </summary>
+    public static ushort MRelayToCoil(string mAddress, ushort mBankBase = 0)
+    {
+        var digits = StripPrefix(mAddress, 'M');
+        if (!ushort.TryParse(digits, out var offset))
+            throw new ArgumentException(
+                $"M-relay address '{mAddress}' is not a valid decimal integer", nameof(mAddress));
+        var result = mBankBase + offset;
+        if (result > ushort.MaxValue)
+            throw new OverflowException($"M-relay {mAddress} + base {mBankBase} exceeds 0xFFFF");
+        return (ushort)result;
+    }
+
+    /// <summary>
+    ///     Translate a MELSEC D-register address (data register) to a 0-based Modbus holding
+    ///     register address. D-addresses are <b>decimal</b>. Default assignment convention is
+    ///     D0 → HR 0 (pass <paramref name="dBankBase"/> = 0); sites with shifted layouts pass
+    ///     their configured base.
+    /// </summary>
+    public static ushort DRegisterToHolding(string dAddress, ushort dBankBase = 0)
+    {
+        var digits = StripPrefix(dAddress, 'D');
+        if (!ushort.TryParse(digits, out var offset))
+            throw new ArgumentException(
+                $"D-register address '{dAddress}' is not a valid decimal integer", nameof(dAddress));
+        var result = dBankBase + offset;
+        if (result > ushort.MaxValue)
+            throw new OverflowException($"D-register {dAddress} + base {dBankBase} exceeds 0xFFFF");
+        return (ushort)result;
+    }
+
+    private static string StripPrefix(string address, char expectedPrefix)
+    {
+        if (string.IsNullOrWhiteSpace(address))
+            throw new ArgumentException("Address must not be empty", nameof(address));
+        var s = address.Trim();
+        if (s.Length > 0 && char.ToUpperInvariant(s[0]) == char.ToUpperInvariant(expectedPrefix))
+            s = s.Substring(1);
+        if (s.Length == 0)
+            throw new ArgumentException($"Address '{address}' has no digits after prefix", nameof(address));
+        return s;
+    }
+
+    private static ushort AddFamilyOffset(ushort baseAddr, string digits, MelsecFamily family)
+    {
+        uint offset = family switch
+        {
+            MelsecFamily.Q_L_iQR => ParseHex(digits),
+            MelsecFamily.F_iQF => ParseOctal(digits),
+            _ => throw new ArgumentOutOfRangeException(nameof(family), family, "Unknown MELSEC family"),
+        };
+        var result = baseAddr + offset;
+        if (result > ushort.MaxValue)
+            throw new OverflowException($"Address {baseAddr}+{offset} exceeds 0xFFFF");
+        return (ushort)result;
+    }
+
+    private static uint ParseHex(string digits)
+    {
+        uint result = 0;
+        foreach (var ch in digits)
+        {
+            uint nibble;
+            if (ch >= '0' && ch <= '9') nibble = (uint)(ch - '0');
+            else if (ch >= 'A' && ch <= 'F') nibble = (uint)(ch - 'A' + 10);
+            else if (ch >= 'a' && ch <= 'f') nibble = (uint)(ch - 'a' + 10);
+            else throw new ArgumentException(
+                $"Address contains non-hex digit '{ch}' — Q/L/iQ-R X/Y addresses are hexadecimal",
+                nameof(digits));
+            result = result * 16 + nibble;
+            if (result > ushort.MaxValue)
+                throw new OverflowException($"Hex address exceeds 0xFFFF");
+        }
+        return result;
+    }
+
+    private static uint ParseOctal(string digits)
+    {
+        uint result = 0;
+        foreach (var ch in digits)
+        {
+            if (ch < '0' || ch > '7')
+                throw new ArgumentException(
+                    $"Address contains non-octal digit '{ch}' — FX/iQ-F X/Y addresses are octal (0-7)",
+                    nameof(digits));
+            result = result * 8 + (uint)(ch - '0');
+            if (result > ushort.MaxValue)
+                throw new OverflowException($"Octal address exceeds 0xFFFF");
+        }
+        return result;
+    }
+}

src/ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient/OpcUaClientDriverOptions.cs

@@ -0,0 +1,180 @@
+namespace ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient;
+
+/// <summary>
+///     OPC UA Client (gateway) driver configuration. Bound from <c>DriverConfig</c> JSON at
+///     driver-host registration time. Models the settings documented in
+///     <c>docs/v2/driver-specs.md</c> §8.
+/// </summary>
+/// <remarks>
+///     This driver connects to a REMOTE OPC UA server and re-exposes its address space
+///     through the local OtOpcUa server — the opposite direction from the usual "server
+///     exposes PLC data" flow. Tier A (pure managed, OPC Foundation reference SDK); universal
+///     protections cover it.
+/// </remarks>
+public sealed class OpcUaClientDriverOptions
+{
+    /// <summary>
+    ///     Remote OPC UA endpoint URL, e.g. <c>opc.tcp://plc.internal:4840</c>. Convenience
+    ///     shortcut for a single-endpoint deployment — equivalent to setting
+    ///     <see cref="EndpointUrls"/> to a list with this one URL. When both are provided,
+    ///     the list wins and <see cref="EndpointUrl"/> is ignored.
+    /// </summary>
+    public string EndpointUrl { get; init; } = "opc.tcp://localhost:4840";
+
+    /// <summary>
+    ///     Ordered list of candidate endpoint URLs for failover. The driver tries each in
+    ///     order at <see cref="OpcUaClientDriver.InitializeAsync"/> and on session drop;
+    ///     the first URL that successfully connects wins. Typical use-case: an OPC UA server
+    ///     pair running in hot-standby (primary 4840 + backup 4841) where either can serve
+    ///     the same address space. Leave unset (or empty) to use <see cref="EndpointUrl"/>
+    ///     as a single-URL shortcut.
+    /// </summary>
+    public IReadOnlyList<string> EndpointUrls { get; init; } = [];
+
+    /// <summary>
+    ///     Per-endpoint connect-attempt timeout during the failover sweep. Short enough that
+    ///     cycling through several dead servers doesn't blow the overall init budget, long
+    ///     enough to tolerate a slow TLS handshake on a healthy server. Applied independently
+    ///     of <see cref="Timeout"/> which governs steady-state operations.
+    /// </summary>
+    public TimeSpan PerEndpointConnectTimeout { get; init; } = TimeSpan.FromSeconds(3);
+
+    /// <summary>
+    ///     Security policy to require when selecting an endpoint. Either a
+    ///     <see cref="OpcUaSecurityPolicy"/> enum constant or a free-form string (for
+    ///     forward-compatibility with future OPC UA policies not yet in the enum).
+    ///     Matched against <c>EndpointDescription.SecurityPolicyUri</c> suffix — the driver
+    ///     connects to the first endpoint whose policy name matches AND whose mode matches
+    ///     <see cref="SecurityMode"/>. When set to <see cref="OpcUaSecurityPolicy.None"/>
+    ///     the driver picks any unsecured endpoint regardless of policy string.
+    /// </summary>
+    public OpcUaSecurityPolicy SecurityPolicy { get; init; } = OpcUaSecurityPolicy.None;
+
+    /// <summary>Security mode.</summary>
+    public OpcUaSecurityMode SecurityMode { get; init; } = OpcUaSecurityMode.None;
+
+    /// <summary>Authentication type.</summary>
+    public OpcUaAuthType AuthType { get; init; } = OpcUaAuthType.Anonymous;
+
+    /// <summary>User name (required only for <see cref="OpcUaAuthType.Username"/>).</summary>
+    public string? Username { get; init; }
+
+    /// <summary>Password (required only for <see cref="OpcUaAuthType.Username"/>).</summary>
+    public string? Password { get; init; }
+
+    /// <summary>
+    ///     Filesystem path to the user-identity certificate (PFX/PEM). Required when
+    ///     <see cref="AuthType"/> is <see cref="OpcUaAuthType.Certificate"/>. The driver
+    ///     loads the cert + private key, which the remote server validates against its
+    ///     <c>TrustedUserCertificates</c> store to authenticate the session's user token.
+    ///     Leave unset to use the driver's application-instance certificate as the user
+    ///     token (not typical — most deployments have a separate user cert).
+    /// </summary>
+    public string? UserCertificatePath { get; init; }
+
+    /// <summary>
+    ///     Optional password that unlocks <see cref="UserCertificatePath"/> when the PFX is
+    ///     protected. PEM files generally have their password on the adjacent key file; this
+    ///     knob only applies to password-locked PFX.
+    /// </summary>
+    public string? UserCertificatePassword { get; init; }
+
+    /// <summary>Server-negotiated session timeout. Default 120s per driver-specs.md §8.</summary>
+    public TimeSpan SessionTimeout { get; init; } = TimeSpan.FromSeconds(120);
+
+    /// <summary>Client-side keep-alive interval.</summary>
+    public TimeSpan KeepAliveInterval { get; init; } = TimeSpan.FromSeconds(5);
+
+    /// <summary>Initial reconnect delay after a session drop.</summary>
+    public TimeSpan ReconnectPeriod { get; init; } = TimeSpan.FromSeconds(5);
+
+    /// <summary>
+    ///     When <c>true</c>, the driver accepts any self-signed / untrusted server certificate.
+    ///     Dev-only — must be <c>false</c> in production so MITM attacks against the opc.tcp
+    ///     channel fail closed.
+    /// </summary>
+    public bool AutoAcceptCertificates { get; init; } = false;
+
+    /// <summary>
+    ///     Application URI the driver reports during session creation. Must match the
+    ///     subject-alt-name on the client certificate if one is used, which is why it's a
+    ///     config knob rather than hard-coded.
+    /// </summary>
+    public string ApplicationUri { get; init; } = "urn:localhost:OtOpcUa:GatewayClient";
+
+    /// <summary>
+    ///     Friendly name sent to the remote server for diagnostics. Shows up in the remote
+    ///     server's session-list so operators can identify which gateway instance is calling.
+    /// </summary>
+    public string SessionName { get; init; } = "OtOpcUa-Gateway";
+
+    /// <summary>Connect + per-operation timeout.</summary>
+    public TimeSpan Timeout { get; init; } = TimeSpan.FromSeconds(10);
+
+    /// <summary>
+    ///     Root NodeId to mirror. Default <c>null</c> = <c>ObjectsFolder</c> (i=85). Set to
+    ///     a scoped root to restrict the address space the driver exposes locally — useful
+    ///     when the remote server has tens of thousands of nodes and only a subset is
+    ///     needed downstream.
+    /// </summary>
+    public string? BrowseRoot { get; init; }
+
+    /// <summary>
+    ///     Cap on total nodes discovered during <c>DiscoverAsync</c>. Default 10_000 —
+    ///     bounds memory on runaway remote servers without being so low that normal
+    ///     deployments hit it. When the cap is reached discovery stops and a warning is
+    ///     written to the driver health surface; the partially-discovered tree is still
+    ///     projected into the local address space.
+    /// </summary>
+    public int MaxDiscoveredNodes { get; init; } = 10_000;
+
+    /// <summary>
+    ///     Max hierarchical depth of the browse. Default 10 — deep enough for realistic
+    ///     OPC UA information models, shallow enough that cyclic graphs can't spin the
+    ///     browse forever.
+    /// </summary>
+    public int MaxBrowseDepth { get; init; } = 10;
+}
+
+/// <summary>OPC UA message security mode.</summary>
+public enum OpcUaSecurityMode
+{
+    None,
+    Sign,
+    SignAndEncrypt,
+}
+
+/// <summary>
+///     OPC UA security policies recognized by the driver. Maps to the standard
+///     <c>http://opcfoundation.org/UA/SecurityPolicy#</c> URI suffixes the SDK uses for
+///     endpoint matching.
+/// </summary>
+/// <remarks>
+///     <see cref="Basic128Rsa15"/> and <see cref="Basic256"/> are <b>deprecated</b> per OPC UA
+///     spec v1.04 — they remain in the enum only for brownfield interop with older servers.
+///     Prefer <see cref="Basic256Sha256"/>, <see cref="Aes128_Sha256_RsaOaep"/>, or
+///     <see cref="Aes256_Sha256_RsaPss"/> for new deployments.
+/// </remarks>
+public enum OpcUaSecurityPolicy
+{
+    /// <summary>No security. Unsigned, unencrypted wire.</summary>
+    None,
+    /// <summary>Deprecated (OPC UA 1.04). Retained for legacy server interop.</summary>
+    Basic128Rsa15,
+    /// <summary>Deprecated (OPC UA 1.04). Retained for legacy server interop.</summary>
+    Basic256,
+    /// <summary>Recommended baseline for current deployments.</summary>
+    Basic256Sha256,
+    /// <summary>Current OPC UA policy; AES-128 + SHA-256 + RSA-OAEP.</summary>
+    Aes128_Sha256_RsaOaep,
+    /// <summary>Current OPC UA policy; AES-256 + SHA-256 + RSA-PSS.</summary>
+    Aes256_Sha256_RsaPss,
+}
+
+/// <summary>User authentication type sent to the remote server.</summary>
+public enum OpcUaAuthType
+{
+    Anonymous,
+    Username,
+    Certificate,
+}

src/ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient/ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.csproj

@@ -0,0 +1,28 @@
+<Project Sdk="Microsoft.NET.Sdk">
+
+    <PropertyGroup>
+        <TargetFramework>net10.0</TargetFramework>
+        <Nullable>enable</Nullable>
+        <ImplicitUsings>enable</ImplicitUsings>
+        <LangVersion>latest</LangVersion>
+        <TreatWarningsAsErrors>true</TreatWarningsAsErrors>
+        <GenerateDocumentationFile>true</GenerateDocumentationFile>
+        <NoWarn>$(NoWarn);CS1591</NoWarn>
+        <RootNamespace>ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient</RootNamespace>
+        <AssemblyName>ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient</AssemblyName>
+    </PropertyGroup>
+
+    <ItemGroup>
+        <ProjectReference Include="..\ZB.MOM.WW.OtOpcUa.Core.Abstractions\ZB.MOM.WW.OtOpcUa.Core.Abstractions.csproj"/>
+    </ItemGroup>
+
+    <ItemGroup>
+        <PackageReference Include="OPCFoundation.NetStandard.Opc.Ua.Client" Version="1.5.378.106"/>
+        <PackageReference Include="OPCFoundation.NetStandard.Opc.Ua.Configuration" Version="1.5.378.106"/>
+    </ItemGroup>
+
+    <ItemGroup>
+        <InternalsVisibleTo Include="ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests"/>
+    </ItemGroup>
+
+</Project>

src/ZB.MOM.WW.OtOpcUa.Driver.S7/S7AddressParser.cs

@@ -0,0 +1,216 @@
+namespace ZB.MOM.WW.OtOpcUa.Driver.S7;
+
+/// <summary>
+///     Siemens S7 memory area. The driver's tag-address parser maps every S7 tag string into
+///     exactly one of these + an offset. Values match the on-wire S7 area codes only
+///     incidentally — S7.Net uses its own <c>DataType</c> enum (<c>DataBlock</c>, <c>Memory</c>,
+///     <c>Input</c>, <c>Output</c>, <c>Timer</c>, <c>Counter</c>) so the adapter layer translates.
+/// </summary>
+public enum S7Area
+{
+    DataBlock,
+    Memory,  // M (Merker / marker byte)
+    Input,   // I (process-image input)
+    Output,  // Q (process-image output)
+    Timer,
+    Counter,
+}
+
+/// <summary>
+///     Access width for a DB / M / I / Q address. Timers and counters are always 16-bit
+///     opaque (not user-addressable via size suffixes).
+/// </summary>
+public enum S7Size
+{
+    Bit,     // X
+    Byte,    // B
+    Word,    // W — 16-bit
+    DWord,   // D — 32-bit
+}
+
+/// <summary>
+///     Parsed form of an S7 tag-address string. Produced by <see cref="S7AddressParser.Parse"/>.
+/// </summary>
+/// <param name="Area">Memory area (DB, M, I, Q, T, C).</param>
+/// <param name="DbNumber">Data block number; only meaningful when <paramref name="Area"/> is <see cref="S7Area.DataBlock"/>.</param>
+/// <param name="Size">Access width. Always <see cref="S7Size.Word"/> for Timer and Counter.</param>
+/// <param name="ByteOffset">Byte offset into the area (for DB/M/I/Q) or the timer/counter number.</param>
+/// <param name="BitOffset">Bit position 0-7 when <paramref name="Size"/> is <see cref="S7Size.Bit"/>; 0 otherwise.</param>
+public readonly record struct S7ParsedAddress(
+    S7Area Area,
+    int DbNumber,
+    S7Size Size,
+    int ByteOffset,
+    int BitOffset);
+
+/// <summary>
+///     Parses Siemens S7 address strings into <see cref="S7ParsedAddress"/>. Accepts the
+///     Siemens TIA-Portal / STEP 7 Classic syntax documented in <c>docs/v2/driver-specs.md</c> §5:
+///     <list type="bullet">
+///         <item><c>DB{n}.DB{X|B|W|D}{offset}[.bit]</c> — e.g. <c>DB1.DBX0.0</c>, <c>DB1.DBW0</c>, <c>DB1.DBD4</c></item>
+///         <item><c>M{B|W|D}{offset}</c> or <c>M{offset}.{bit}</c> — e.g. <c>MB0</c>, <c>MW0</c>, <c>MD4</c>, <c>M0.0</c></item>
+///         <item><c>I{B|W|D}{offset}</c> or <c>I{offset}.{bit}</c> — e.g. <c>IB0</c>, <c>IW0</c>, <c>ID0</c>, <c>I0.0</c></item>
+///         <item><c>Q{B|W|D}{offset}</c> or <c>Q{offset}.{bit}</c> — e.g. <c>QB0</c>, <c>QW0</c>, <c>QD0</c>, <c>Q0.0</c></item>
+///         <item><c>T{n}</c> — e.g. <c>T0</c>, <c>T15</c></item>
+///         <item><c>C{n}</c> — e.g. <c>C0</c>, <c>C10</c></item>
+///     </list>
+///     Grammar is case-insensitive. Leading/trailing whitespace tolerated. Bit specifiers
+///     must be 0-7; byte offsets must be non-negative; DB numbers must be &gt;= 1.
+/// </summary>
+/// <remarks>
+///     Parse is deliberately strict — the parser rejects syntactic garbage up-front so a bad
+///     tag config fails at driver init time instead of surfacing as a misleading
+///     <c>BadInternalError</c> on every Read against that tag.
+/// </remarks>
+public static class S7AddressParser
+{
+    /// <summary>
+    ///     Parse an S7 address. Throws <see cref="FormatException"/> on any syntax error with
+    ///     the offending input echoed in the message so operators can correlate to the tag
+    ///     config that produced the fault.
+    /// </summary>
+    public static S7ParsedAddress Parse(string address)
+    {
+        if (string.IsNullOrWhiteSpace(address))
+            throw new FormatException("S7 address must not be empty");
+        var s = address.Trim().ToUpperInvariant();
+
+        // --- DB{n}.DB{X|B|W|D}{offset}[.bit] ---
+        if (s.StartsWith("DB") && TryParseDataBlock(s, out var dbResult))
+            return dbResult;
+
+        if (s.Length < 2)
+            throw new FormatException($"S7 address '{address}' is too short to parse");
+
+        var areaChar = s[0];
+        var rest = s.Substring(1);
+
+        switch (areaChar)
+        {
+            case 'M': return ParseMIQ(S7Area.Memory, rest, address);
+            case 'I': return ParseMIQ(S7Area.Input, rest, address);
+            case 'Q': return ParseMIQ(S7Area.Output, rest, address);
+            case 'T': return ParseTimerOrCounter(S7Area.Timer, rest, address);
+            case 'C': return ParseTimerOrCounter(S7Area.Counter, rest, address);
+            default:
+                throw new FormatException($"S7 address '{address}' starts with unknown area '{areaChar}' (expected DB/M/I/Q/T/C)");
+        }
+    }
+
+    /// <summary>
+    ///     Try-parse variant for callers that can't afford an exception on bad input (e.g.
+    ///     config validation pages in the Admin UI). Returns <c>false</c> for any input that
+    ///     would throw from <see cref="Parse"/>.
+    /// </summary>
+    public static bool TryParse(string address, out S7ParsedAddress result)
+    {
+        try
+        {
+            result = Parse(address);
+            return true;
+        }
+        catch (FormatException)
+        {
+            result = default;
+            return false;
+        }
+    }
+
+    private static bool TryParseDataBlock(string s, out S7ParsedAddress result)
+    {
+        result = default;
+        // Split on first '.': left side must be DB{n}, right side DB{X|B|W|D}{offset}[.bit]
+        var dot = s.IndexOf('.');
+        if (dot < 0) return false;
+        var head = s.Substring(0, dot);    // DB{n}
+        var tail = s.Substring(dot + 1);   // DB{X|B|W|D}{offset}[.bit]
+
+        if (head.Length < 3) return false;
+        if (!int.TryParse(head.AsSpan(2), out var dbNumber) || dbNumber < 1)
+            throw new FormatException($"S7 DB number in '{s}' must be a positive integer");
+
+        if (!tail.StartsWith("DB") || tail.Length < 4)
+            throw new FormatException($"S7 DB address tail '{tail}' must start with DB{{X|B|W|D}}");
+
+        var sizeChar = tail[2];
+        var offsetStart = 3;
+        var size = sizeChar switch
+        {
+            'X' => S7Size.Bit,
+            'B' => S7Size.Byte,
+            'W' => S7Size.Word,
+            'D' => S7Size.DWord,
+            _ => throw new FormatException($"S7 DB size '{sizeChar}' in '{s}' must be X/B/W/D"),
+        };
+
+        var (byteOffset, bitOffset) = ParseOffsetAndOptionalBit(tail, offsetStart, size, s);
+        result = new S7ParsedAddress(S7Area.DataBlock, dbNumber, size, byteOffset, bitOffset);
+        return true;
+    }
+
+    private static S7ParsedAddress ParseMIQ(S7Area area, string rest, string original)
+    {
+        if (rest.Length == 0)
+            throw new FormatException($"S7 address '{original}' has no offset");
+
+        var first = rest[0];
+        S7Size size;
+        int offsetStart;
+        switch (first)
+        {
+            case 'B': size = S7Size.Byte;  offsetStart = 1; break;
+            case 'W': size = S7Size.Word;  offsetStart = 1; break;
+            case 'D': size = S7Size.DWord; offsetStart = 1; break;
+            default:
+                // No size prefix => bit-level address requires explicit .bit. Size stays Bit;
+                // ParseOffsetAndOptionalBit will demand the dot.
+                size = S7Size.Bit;
+                offsetStart = 0;
+                break;
+        }
+
+        var (byteOffset, bitOffset) = ParseOffsetAndOptionalBit(rest, offsetStart, size, original);
+        return new S7ParsedAddress(area, DbNumber: 0, size, byteOffset, bitOffset);
+    }
+
+    private static S7ParsedAddress ParseTimerOrCounter(S7Area area, string rest, string original)
+    {
+        if (rest.Length == 0)
+            throw new FormatException($"S7 address '{original}' has no {area} number");
+        if (!int.TryParse(rest, out var number) || number < 0)
+            throw new FormatException($"S7 {area} number in '{original}' must be a non-negative integer");
+        return new S7ParsedAddress(area, DbNumber: 0, S7Size.Word, number, BitOffset: 0);
+    }
+
+    private static (int byteOffset, int bitOffset) ParseOffsetAndOptionalBit(
+        string s, int start, S7Size size, string original)
+    {
+        var offsetEnd = start;
+        while (offsetEnd < s.Length && s[offsetEnd] >= '0' && s[offsetEnd] <= '9')
+            offsetEnd++;
+        if (offsetEnd == start)
+            throw new FormatException($"S7 address '{original}' has no byte-offset digits");
+
+        if (!int.TryParse(s.AsSpan(start, offsetEnd - start), out var byteOffset) || byteOffset < 0)
+            throw new FormatException($"S7 byte offset in '{original}' must be non-negative");
+
+        // No bit-suffix: done unless size is Bit with no prefix, which requires one.
+        if (offsetEnd == s.Length)
+        {
+            if (size == S7Size.Bit)
+                throw new FormatException($"S7 address '{original}' needs a .{{bit}} suffix for bit access");
+            return (byteOffset, 0);
+        }
+
+        if (s[offsetEnd] != '.')
+            throw new FormatException($"S7 address '{original}' has unexpected character after offset");
+
+        if (size != S7Size.Bit)
+            throw new FormatException($"S7 address '{original}' has a bit suffix but the size is {size} — bit access needs X (DB) or no size prefix (M/I/Q)");
+
+        if (!int.TryParse(s.AsSpan(offsetEnd + 1), out var bitOffset) || bitOffset is < 0 or > 7)
+            throw new FormatException($"S7 bit offset in '{original}' must be 0-7");
+
+        return (byteOffset, bitOffset);
+    }
+}

src/ZB.MOM.WW.OtOpcUa.Driver.S7/S7Driver.cs

@@ -0,0 +1,513 @@
+using S7.Net;
+using ZB.MOM.WW.OtOpcUa.Core.Abstractions;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.S7;
+
+/// <summary>
+///     Siemens S7 native driver — speaks S7comm over ISO-on-TCP (port 102) via the S7netplus
+///     library. First implementation of <see cref="IDriver"/> for an in-process .NET Standard
+///     PLC protocol that is NOT Modbus, validating that the v2 driver-capability interfaces
+///     generalize beyond Modbus + Galaxy.
+/// </summary>
+/// <remarks>
+///     <para>
+///         PR 62 ships the scaffold: <see cref="IDriver"/> only (Initialize / Reinitialize /
+///         Shutdown / GetHealth). <see cref="ITagDiscovery"/>, <see cref="IReadable"/>,
+///         <see cref="IWritable"/>, <see cref="ISubscribable"/>, <see cref="IHostConnectivityProbe"/>
+///         land in PRs 63-65 once the address parser (PR 63) is in place.
+///     </para>
+///     <para>
+///         <b>Single-connection policy</b>: S7netplus documented pattern is one
+///         <c>Plc</c> instance per PLC, serialized with a <see cref="SemaphoreSlim"/>.
+///         Parallelising reads against a single S7 CPU doesn't help — the CPU scans the
+///         communication mailbox at most once per cycle (2-10 ms) and queues concurrent
+///         requests wire-side anyway. Multiple client-side connections just waste the CPU's
+///         8-64 connection-resource budget.
+///     </para>
+/// </remarks>
+public sealed class S7Driver(S7DriverOptions options, string driverInstanceId)
+    : IDriver, ITagDiscovery, IReadable, IWritable, ISubscribable, IHostConnectivityProbe, IDisposable, IAsyncDisposable
+{
+    // ---- ISubscribable + IHostConnectivityProbe state ----
+
+    private readonly System.Collections.Concurrent.ConcurrentDictionary<long, SubscriptionState> _subscriptions = new();
+    private long _nextSubscriptionId;
+    private readonly object _probeLock = new();
+    private HostState _hostState = HostState.Unknown;
+    private DateTime _hostStateChangedUtc = DateTime.UtcNow;
+    private CancellationTokenSource? _probeCts;
+
+    public event EventHandler<DataChangeEventArgs>? OnDataChange;
+    public event EventHandler<HostStatusChangedEventArgs>? OnHostStatusChanged;
+
+    /// <summary>OPC UA StatusCode used when the tag name isn't in the driver's tag map.</summary>
+    private const uint StatusBadNodeIdUnknown = 0x80340000u;
+    /// <summary>OPC UA StatusCode used when the tag's data type isn't implemented yet.</summary>
+    private const uint StatusBadNotSupported = 0x803D0000u;
+    /// <summary>OPC UA StatusCode used when the tag is declared read-only.</summary>
+    private const uint StatusBadNotWritable = 0x803B0000u;
+    /// <summary>OPC UA StatusCode used when write fails validation (e.g. out-of-range value).</summary>
+    private const uint StatusBadInternalError = 0x80020000u;
+    /// <summary>OPC UA StatusCode used for socket / timeout / protocol-layer faults.</summary>
+    private const uint StatusBadCommunicationError = 0x80050000u;
+    /// <summary>OPC UA StatusCode used when S7 returns <c>ErrorCode.WrongCPU</c> / PUT/GET disabled.</summary>
+    private const uint StatusBadDeviceFailure = 0x80550000u;
+
+    private readonly Dictionary<string, S7TagDefinition> _tagsByName = new(StringComparer.OrdinalIgnoreCase);
+    private readonly Dictionary<string, S7ParsedAddress> _parsedByName = new(StringComparer.OrdinalIgnoreCase);
+
+    private readonly S7DriverOptions _options = options;
+    private readonly SemaphoreSlim _gate = new(1, 1);
+
+    /// <summary>
+    ///     Per-connection gate. Internal so PRs 63-65 (read/write/subscribe) can serialize on
+    ///     the same semaphore without exposing it publicly. Single-connection-per-PLC is a
+    ///     hard requirement of S7netplus — see class remarks.
+    /// </summary>
+    internal SemaphoreSlim Gate => _gate;
+
+    /// <summary>
+    ///     Active S7.Net PLC connection. Null until <see cref="InitializeAsync"/> returns; null
+    ///     after <see cref="ShutdownAsync"/>. Read-only outside this class; PR 64's Read/Write
+    ///     will take the <see cref="_gate"/> before touching it.
+    /// </summary>
+    internal Plc? Plc { get; private set; }
+
+    private DriverHealth _health = new(DriverState.Unknown, null, null);
+    private bool _disposed;
+
+    public string DriverInstanceId => driverInstanceId;
+    public string DriverType => "S7";
+
+    public async Task InitializeAsync(string driverConfigJson, CancellationToken cancellationToken)
+    {
+        _health = new DriverHealth(DriverState.Initializing, null, null);
+        try
+        {
+            var plc = new Plc(_options.CpuType, _options.Host, _options.Rack, _options.Slot);
+            // S7netplus writes timeouts into the underlying TcpClient via Plc.WriteTimeout /
+            // Plc.ReadTimeout (milliseconds). Set before OpenAsync so the handshake itself
+            // honours the bound.
+            plc.WriteTimeout = (int)_options.Timeout.TotalMilliseconds;
+            plc.ReadTimeout = (int)_options.Timeout.TotalMilliseconds;
+
+            using var cts = CancellationTokenSource.CreateLinkedTokenSource(cancellationToken);
+            cts.CancelAfter(_options.Timeout);
+            await plc.OpenAsync(cts.Token).ConfigureAwait(false);
+
+            Plc = plc;
+
+            // Parse every tag's address once at init so config typos fail fast here instead
+            // of surfacing as BadInternalError on every Read against the bad tag. The parser
+            // also rejects bit-offset > 7, DB 0, unknown area letters, etc.
+            _tagsByName.Clear();
+            _parsedByName.Clear();
+            foreach (var t in _options.Tags)
+            {
+                var parsed = S7AddressParser.Parse(t.Address); // throws FormatException
+                _tagsByName[t.Name] = t;
+                _parsedByName[t.Name] = parsed;
+            }
+
+            _health = new DriverHealth(DriverState.Healthy, DateTime.UtcNow, null);
+
+            // Kick off the probe loop once the connection is up. Initial HostState stays
+            // Unknown until the first probe tick succeeds — avoids broadcasting a premature
+            // Running transition before any PDU round-trip has happened.
+            if (_options.Probe.Enabled)
+            {
+                _probeCts = new CancellationTokenSource();
+                _ = Task.Run(() => ProbeLoopAsync(_probeCts.Token), _probeCts.Token);
+            }
+        }
+        catch (Exception ex)
+        {
+            // Clean up a partially-constructed Plc so a retry from the caller doesn't leak
+            // the TcpClient. S7netplus's Close() is best-effort and idempotent.
+            try { Plc?.Close(); } catch { }
+            Plc = null;
+            _health = new DriverHealth(DriverState.Faulted, null, ex.Message);
+            throw;
+        }
+    }
+
+    public async Task ReinitializeAsync(string driverConfigJson, CancellationToken cancellationToken)
+    {
+        await ShutdownAsync(cancellationToken).ConfigureAwait(false);
+        await InitializeAsync(driverConfigJson, cancellationToken).ConfigureAwait(false);
+    }
+
+    public Task ShutdownAsync(CancellationToken cancellationToken)
+    {
+        try { _probeCts?.Cancel(); } catch { }
+        _probeCts?.Dispose();
+        _probeCts = null;
+
+        foreach (var state in _subscriptions.Values)
+        {
+            try { state.Cts.Cancel(); } catch { }
+            state.Cts.Dispose();
+        }
+        _subscriptions.Clear();
+
+        try { Plc?.Close(); } catch { /* best-effort — tearing down anyway */ }
+        Plc = null;
+        _health = new DriverHealth(DriverState.Unknown, _health.LastSuccessfulRead, null);
+        return Task.CompletedTask;
+    }
+
+    public DriverHealth GetHealth() => _health;
+
+    /// <summary>
+    ///     Approximate memory footprint. The Plc instance + one 240-960 byte PDU buffer is
+    ///     under 4 KB; return 0 because the <see cref="IDriver"/> contract asks for a
+    ///     driver-attributable growth number and S7.Net doesn't expose one.
+    /// </summary>
+    public long GetMemoryFootprint() => 0;
+
+    public Task FlushOptionalCachesAsync(CancellationToken cancellationToken) => Task.CompletedTask;
+
+    // ---- IReadable ----
+
+    public async Task<IReadOnlyList<DataValueSnapshot>> ReadAsync(
+        IReadOnlyList<string> fullReferences, CancellationToken cancellationToken)
+    {
+        var plc = RequirePlc();
+        var now = DateTime.UtcNow;
+        var results = new DataValueSnapshot[fullReferences.Count];
+
+        await _gate.WaitAsync(cancellationToken).ConfigureAwait(false);
+        try
+        {
+            for (var i = 0; i < fullReferences.Count; i++)
+            {
+                var name = fullReferences[i];
+                if (!_tagsByName.TryGetValue(name, out var tag))
+                {
+                    results[i] = new DataValueSnapshot(null, StatusBadNodeIdUnknown, null, now);
+                    continue;
+                }
+                try
+                {
+                    var value = await ReadOneAsync(plc, tag, cancellationToken).ConfigureAwait(false);
+                    results[i] = new DataValueSnapshot(value, 0u, now, now);
+                    _health = new DriverHealth(DriverState.Healthy, now, null);
+                }
+                catch (NotSupportedException)
+                {
+                    results[i] = new DataValueSnapshot(null, StatusBadNotSupported, null, now);
+                }
+                catch (global::S7.Net.PlcException pex)
+                {
+                    // S7.Net's PlcException carries an ErrorCode; PUT/GET-disabled on
+                    // S7-1200/1500 surfaces here. Map to BadDeviceFailure so operators see a
+                    // device-config problem (toggle PUT/GET in TIA Portal) rather than a
+                    // transient fault — per driver-specs.md §5.
+                    results[i] = new DataValueSnapshot(null, StatusBadDeviceFailure, null, now);
+                    _health = new DriverHealth(DriverState.Degraded, _health.LastSuccessfulRead, pex.Message);
+                }
+                catch (Exception ex)
+                {
+                    results[i] = new DataValueSnapshot(null, StatusBadCommunicationError, null, now);
+                    _health = new DriverHealth(DriverState.Degraded, _health.LastSuccessfulRead, ex.Message);
+                }
+            }
+        }
+        finally { _gate.Release(); }
+        return results;
+    }
+
+    private async Task<object> ReadOneAsync(global::S7.Net.Plc plc, S7TagDefinition tag, CancellationToken ct)
+    {
+        var addr = _parsedByName[tag.Name];
+        // S7.Net's string-based ReadAsync returns object where the boxed .NET type depends on
+        // the size suffix: DBX=bool, DBB=byte, DBW=ushort, DBD=uint. Our S7DataType enum
+        // specifies the SEMANTIC type (Int16 vs UInt16 vs Float32 etc.); the reinterpret below
+        // converts the raw unsigned boxed value into the requested type without issuing an
+        // extra PLC round-trip.
+        var raw = await plc.ReadAsync(tag.Address, ct).ConfigureAwait(false)
+            ?? throw new System.IO.InvalidDataException($"S7.Net returned null for '{tag.Address}'");
+
+        return (tag.DataType, addr.Size, raw) switch
+        {
+            (S7DataType.Bool, S7Size.Bit, bool b) => b,
+            (S7DataType.Byte, S7Size.Byte, byte by) => by,
+            (S7DataType.UInt16, S7Size.Word, ushort u16) => u16,
+            (S7DataType.Int16, S7Size.Word, ushort u16) => unchecked((short)u16),
+            (S7DataType.UInt32, S7Size.DWord, uint u32) => u32,
+            (S7DataType.Int32, S7Size.DWord, uint u32) => unchecked((int)u32),
+            (S7DataType.Float32, S7Size.DWord, uint u32) => BitConverter.UInt32BitsToSingle(u32),
+
+            (S7DataType.Int64, _, _)   => throw new NotSupportedException("S7 Int64 reads land in a follow-up PR"),
+            (S7DataType.UInt64, _, _)  => throw new NotSupportedException("S7 UInt64 reads land in a follow-up PR"),
+            (S7DataType.Float64, _, _) => throw new NotSupportedException("S7 Float64 (LReal) reads land in a follow-up PR"),
+            (S7DataType.String, _, _)  => throw new NotSupportedException("S7 STRING reads land in a follow-up PR"),
+            (S7DataType.DateTime, _, _) => throw new NotSupportedException("S7 DateTime reads land in a follow-up PR"),
+
+            _ => throw new System.IO.InvalidDataException(
+                $"S7 Read type-mismatch: tag '{tag.Name}' declared {tag.DataType} but address '{tag.Address}' " +
+                $"parsed as Size={addr.Size}; S7.Net returned {raw.GetType().Name}"),
+        };
+    }
+
+    // ---- IWritable ----
+
+    public async Task<IReadOnlyList<WriteResult>> WriteAsync(
+        IReadOnlyList<WriteRequest> writes, CancellationToken cancellationToken)
+    {
+        var plc = RequirePlc();
+        var results = new WriteResult[writes.Count];
+
+        await _gate.WaitAsync(cancellationToken).ConfigureAwait(false);
+        try
+        {
+            for (var i = 0; i < writes.Count; i++)
+            {
+                var w = writes[i];
+                if (!_tagsByName.TryGetValue(w.FullReference, out var tag))
+                {
+                    results[i] = new WriteResult(StatusBadNodeIdUnknown);
+                    continue;
+                }
+                if (!tag.Writable)
+                {
+                    results[i] = new WriteResult(StatusBadNotWritable);
+                    continue;
+                }
+                try
+                {
+                    await WriteOneAsync(plc, tag, w.Value, cancellationToken).ConfigureAwait(false);
+                    results[i] = new WriteResult(0u);
+                }
+                catch (NotSupportedException)
+                {
+                    results[i] = new WriteResult(StatusBadNotSupported);
+                }
+                catch (global::S7.Net.PlcException)
+                {
+                    results[i] = new WriteResult(StatusBadDeviceFailure);
+                }
+                catch (Exception)
+                {
+                    results[i] = new WriteResult(StatusBadInternalError);
+                }
+            }
+        }
+        finally { _gate.Release(); }
+        return results;
+    }
+
+    private async Task WriteOneAsync(global::S7.Net.Plc plc, S7TagDefinition tag, object? value, CancellationToken ct)
+    {
+        // S7.Net's Plc.WriteAsync(string address, object value) expects the boxed value to
+        // match the address's size-suffix type: DBX=bool, DBB=byte, DBW=ushort, DBD=uint.
+        // Our S7DataType lets the caller pass short/int/float; convert to the unsigned
+        // wire representation before handing off.
+        var boxed = tag.DataType switch
+        {
+            S7DataType.Bool    => (object)Convert.ToBoolean(value),
+            S7DataType.Byte    => (object)Convert.ToByte(value),
+            S7DataType.UInt16  => (object)Convert.ToUInt16(value),
+            S7DataType.Int16   => (object)unchecked((ushort)Convert.ToInt16(value)),
+            S7DataType.UInt32  => (object)Convert.ToUInt32(value),
+            S7DataType.Int32   => (object)unchecked((uint)Convert.ToInt32(value)),
+            S7DataType.Float32 => (object)BitConverter.SingleToUInt32Bits(Convert.ToSingle(value)),
+
+            S7DataType.Int64   => throw new NotSupportedException("S7 Int64 writes land in a follow-up PR"),
+            S7DataType.UInt64  => throw new NotSupportedException("S7 UInt64 writes land in a follow-up PR"),
+            S7DataType.Float64 => throw new NotSupportedException("S7 Float64 (LReal) writes land in a follow-up PR"),
+            S7DataType.String  => throw new NotSupportedException("S7 STRING writes land in a follow-up PR"),
+            S7DataType.DateTime => throw new NotSupportedException("S7 DateTime writes land in a follow-up PR"),
+            _ => throw new InvalidOperationException($"Unknown S7DataType {tag.DataType}"),
+        };
+        await plc.WriteAsync(tag.Address, boxed, ct).ConfigureAwait(false);
+    }
+
+    private global::S7.Net.Plc RequirePlc() =>
+        Plc ?? throw new InvalidOperationException("S7Driver not initialized");
+
+    // ---- ITagDiscovery ----
+
+    public Task DiscoverAsync(IAddressSpaceBuilder builder, CancellationToken cancellationToken)
+    {
+        ArgumentNullException.ThrowIfNull(builder);
+        var folder = builder.Folder("S7", "S7");
+        foreach (var t in _options.Tags)
+        {
+            folder.Variable(t.Name, t.Name, new DriverAttributeInfo(
+                FullName: t.Name,
+                DriverDataType: MapDataType(t.DataType),
+                IsArray: false,
+                ArrayDim: null,
+                SecurityClass: t.Writable ? SecurityClassification.Operate : SecurityClassification.ViewOnly,
+                IsHistorized: false,
+                IsAlarm: false));
+        }
+        return Task.CompletedTask;
+    }
+
+    private static DriverDataType MapDataType(S7DataType t) => t switch
+    {
+        S7DataType.Bool => DriverDataType.Boolean,
+        S7DataType.Byte => DriverDataType.Int32,      // no 8-bit in DriverDataType yet
+        S7DataType.Int16 or S7DataType.UInt16 or S7DataType.Int32 or S7DataType.UInt32 => DriverDataType.Int32,
+        S7DataType.Int64 or S7DataType.UInt64 => DriverDataType.Int32, // widens; lossy for >2^31-1
+        S7DataType.Float32 => DriverDataType.Float32,
+        S7DataType.Float64 => DriverDataType.Float64,
+        S7DataType.String => DriverDataType.String,
+        S7DataType.DateTime => DriverDataType.DateTime,
+        _ => DriverDataType.Int32,
+    };
+
+    // ---- ISubscribable (polling overlay) ----
+
+    public Task<ISubscriptionHandle> SubscribeAsync(
+        IReadOnlyList<string> fullReferences, TimeSpan publishingInterval, CancellationToken cancellationToken)
+    {
+        var id = Interlocked.Increment(ref _nextSubscriptionId);
+        var cts = new CancellationTokenSource();
+        // Floor at 100 ms — S7 CPUs scan 2-10 ms but the comms mailbox is processed at most
+        // once per scan; sub-100 ms polling just queues wire-side with worse latency.
+        var interval = publishingInterval < TimeSpan.FromMilliseconds(100)
+            ? TimeSpan.FromMilliseconds(100)
+            : publishingInterval;
+        var handle = new S7SubscriptionHandle(id);
+        var state = new SubscriptionState(handle, [.. fullReferences], interval, cts);
+        _subscriptions[id] = state;
+        _ = Task.Run(() => PollLoopAsync(state, cts.Token), cts.Token);
+        return Task.FromResult<ISubscriptionHandle>(handle);
+    }
+
+    public Task UnsubscribeAsync(ISubscriptionHandle handle, CancellationToken cancellationToken)
+    {
+        if (handle is S7SubscriptionHandle h && _subscriptions.TryRemove(h.Id, out var state))
+        {
+            state.Cts.Cancel();
+            state.Cts.Dispose();
+        }
+        return Task.CompletedTask;
+    }
+
+    private async Task PollLoopAsync(SubscriptionState state, CancellationToken ct)
+    {
+        // Initial-data push per OPC UA Part 4 convention.
+        try { await PollOnceAsync(state, forceRaise: true, ct).ConfigureAwait(false); }
+        catch (OperationCanceledException) { return; }
+        catch { /* first-read error — polling continues */ }
+
+        while (!ct.IsCancellationRequested)
+        {
+            try { await Task.Delay(state.Interval, ct).ConfigureAwait(false); }
+            catch (OperationCanceledException) { return; }
+
+            try { await PollOnceAsync(state, forceRaise: false, ct).ConfigureAwait(false); }
+            catch (OperationCanceledException) { return; }
+            catch { /* transient polling error — loop continues, health surface reflects it */ }
+        }
+    }
+
+    private async Task PollOnceAsync(SubscriptionState state, bool forceRaise, CancellationToken ct)
+    {
+        var snapshots = await ReadAsync(state.TagReferences, ct).ConfigureAwait(false);
+        for (var i = 0; i < state.TagReferences.Count; i++)
+        {
+            var tagRef = state.TagReferences[i];
+            var current = snapshots[i];
+            var lastSeen = state.LastValues.TryGetValue(tagRef, out var prev) ? prev : default;
+
+            if (forceRaise || !Equals(lastSeen?.Value, current.Value) || lastSeen?.StatusCode != current.StatusCode)
+            {
+                state.LastValues[tagRef] = current;
+                OnDataChange?.Invoke(this, new DataChangeEventArgs(state.Handle, tagRef, current));
+            }
+        }
+    }
+
+    private sealed record SubscriptionState(
+        S7SubscriptionHandle Handle,
+        IReadOnlyList<string> TagReferences,
+        TimeSpan Interval,
+        CancellationTokenSource Cts)
+    {
+        public System.Collections.Concurrent.ConcurrentDictionary<string, DataValueSnapshot> LastValues { get; }
+            = new(StringComparer.OrdinalIgnoreCase);
+    }
+
+    private sealed record S7SubscriptionHandle(long Id) : ISubscriptionHandle
+    {
+        public string DiagnosticId => $"s7-sub-{Id}";
+    }
+
+    // ---- IHostConnectivityProbe ----
+
+    /// <summary>
+    ///     Host identifier surfaced in <see cref="GetHostStatuses"/>. <c>host:port</c> format
+    ///     matches the Modbus driver's convention so the Admin UI dashboard renders both
+    ///     family's rows uniformly.
+    /// </summary>
+    public string HostName => $"{_options.Host}:{_options.Port}";
+
+    public IReadOnlyList<HostConnectivityStatus> GetHostStatuses()
+    {
+        lock (_probeLock)
+            return [new HostConnectivityStatus(HostName, _hostState, _hostStateChangedUtc)];
+    }
+
+    private async Task ProbeLoopAsync(CancellationToken ct)
+    {
+        while (!ct.IsCancellationRequested)
+        {
+            var success = false;
+            try
+            {
+                // Probe via S7.Net's low-cost GetCpuStatus — returns the CPU state (Run/Stop)
+                // and is intentionally light on the comms mailbox. Single-word Plc.ReadAsync
+                // would also work but GetCpuStatus doubles as a "PLC actually up" check.
+                using var probeCts = CancellationTokenSource.CreateLinkedTokenSource(ct);
+                probeCts.CancelAfter(_options.Probe.Timeout);
+
+                var plc = Plc;
+                if (plc is null) throw new InvalidOperationException("Plc dropped during probe");
+
+                await _gate.WaitAsync(probeCts.Token).ConfigureAwait(false);
+                try
+                {
+                    _ = await plc.ReadStatusAsync(probeCts.Token).ConfigureAwait(false);
+                    success = true;
+                }
+                finally { _gate.Release(); }
+            }
+            catch (OperationCanceledException) when (ct.IsCancellationRequested) { return; }
+            catch { /* transport/timeout/exception — treated as Stopped below */ }
+
+            TransitionTo(success ? HostState.Running : HostState.Stopped);
+
+            try { await Task.Delay(_options.Probe.Interval, ct).ConfigureAwait(false); }
+            catch (OperationCanceledException) { return; }
+        }
+    }
+
+    private void TransitionTo(HostState newState)
+    {
+        HostState old;
+        lock (_probeLock)
+        {
+            old = _hostState;
+            if (old == newState) return;
+            _hostState = newState;
+            _hostStateChangedUtc = DateTime.UtcNow;
+        }
+        OnHostStatusChanged?.Invoke(this, new HostStatusChangedEventArgs(HostName, old, newState));
+    }
+
+    public void Dispose() => DisposeAsync().AsTask().GetAwaiter().GetResult();
+
+    public async ValueTask DisposeAsync()
+    {
+        if (_disposed) return;
+        _disposed = true;
+        try { await ShutdownAsync(CancellationToken.None).ConfigureAwait(false); }
+        catch { /* disposal is best-effort */ }
+        _gate.Dispose();
+    }
+}

src/ZB.MOM.WW.OtOpcUa.Driver.S7/S7DriverOptions.cs

@@ -0,0 +1,112 @@
+using S7NetCpuType = global::S7.Net.CpuType;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.S7;
+
+/// <summary>
+///     Siemens S7 native (S7comm / ISO-on-TCP port 102) driver configuration. Bound from the
+///     driver's <c>DriverConfig</c> JSON at <c>DriverHost.RegisterAsync</c>. Unlike the Modbus
+///     driver the S7 driver uses the PLC's *native* protocol — port 102 ISO-on-TCP rather
+///     than Modbus's 502, and S7-specific area codes (DB, M, I, Q) rather than holding-
+///     register / coil tables.
+/// </summary>
+/// <remarks>
+///     <para>
+///         The driver requires <b>PUT/GET communication enabled</b> in the TIA Portal
+///         hardware config for S7-1200/1500. The factory default disables PUT/GET access,
+///         so a driver configured against a freshly-flashed CPU will see a hard error
+///         (S7.Net surfaces it as <c>Plc.ReadAsync</c> returning <c>ErrorCode.Accessing</c>).
+///         The driver maps that specifically to <c>BadNotSupported</c> and flags it as a
+///         configuration alert rather than a transient fault — blind Polly retry is wasted
+///         effort when the PLC will keep refusing every request.
+///     </para>
+///     <para>
+///         See <c>docs/v2/driver-specs.md</c> §5 for the full specification.
+///     </para>
+/// </remarks>
+public sealed class S7DriverOptions
+{
+    /// <summary>PLC IP address or hostname.</summary>
+    public string Host { get; init; } = "127.0.0.1";
+
+    /// <summary>TCP port. ISO-on-TCP is 102 on every S7 model; override only for unusual NAT setups.</summary>
+    public int Port { get; init; } = 102;
+
+    /// <summary>
+    ///     CPU family. Determines the ISO-TSAP slot byte that S7.Net uses during connection
+    ///     setup — pick the family that matches the target PLC exactly.
+    /// </summary>
+    public S7NetCpuType CpuType { get; init; } = S7NetCpuType.S71500;
+
+    /// <summary>
+    ///     Hardware rack number. Almost always 0; relevant only for distributed S7-400 racks
+    ///     with multiple CPUs.
+    /// </summary>
+    public short Rack { get; init; } = 0;
+
+    /// <summary>
+    ///     CPU slot. Conventions per family: S7-300 = slot 2, S7-400 = slot 2 or 3,
+    ///     S7-1200 / S7-1500 = slot 0 (onboard PN). S7.Net uses this to build the remote
+    ///     TSAP. Wrong slot → connection refused during handshake.
+    /// </summary>
+    public short Slot { get; init; } = 0;
+
+    /// <summary>Connect + per-operation timeout.</summary>
+    public TimeSpan Timeout { get; init; } = TimeSpan.FromSeconds(5);
+
+    /// <summary>Pre-declared tag map. S7 has a symbol-table protocol but S7.Net does not expose it, so the driver operates off a static tag list configured per-site. Address grammar documented in S7AddressParser (PR 63).</summary>
+    public IReadOnlyList<S7TagDefinition> Tags { get; init; } = [];
+
+    /// <summary>
+    ///     Background connectivity-probe settings. When enabled, the driver runs a tick loop
+    ///     that issues a cheap read against <see cref="S7ProbeOptions.ProbeAddress"/> every
+    ///     <see cref="S7ProbeOptions.Interval"/> and raises <c>OnHostStatusChanged</c> on
+    ///     Running ↔ Stopped transitions.
+    /// </summary>
+    public S7ProbeOptions Probe { get; init; } = new();
+}
+
+public sealed class S7ProbeOptions
+{
+    public bool Enabled { get; init; } = true;
+    public TimeSpan Interval { get; init; } = TimeSpan.FromSeconds(5);
+    public TimeSpan Timeout { get; init; } = TimeSpan.FromSeconds(2);
+
+    /// <summary>
+    ///     Address to probe for liveness. DB1.DBW0 is the convention if the PLC project
+    ///     reserves a small fingerprint DB for health checks (per <c>docs/v2/s7.md</c>);
+    ///     if not, pick any valid Merker word like <c>MW0</c>.
+    /// </summary>
+    public string ProbeAddress { get; init; } = "MW0";
+}
+
+/// <summary>
+///     One S7 variable as exposed by the driver. Addresses use S7.Net syntax — see
+///     <c>S7AddressParser</c> (PR 63) for the grammar.
+/// </summary>
+/// <param name="Name">Tag name; OPC UA browse name + driver full reference.</param>
+/// <param name="Address">S7 address string, e.g. <c>DB1.DBW0</c>, <c>M0.0</c>, <c>I0.0</c>, <c>QD4</c>. Grammar documented in <c>S7AddressParser</c> (PR 63).</param>
+/// <param name="DataType">Logical data type — drives the underlying S7.Net read/write width.</param>
+/// <param name="Writable">When true the driver accepts writes for this tag.</param>
+/// <param name="StringLength">For <c>DataType = String</c>: S7-string max length. Default 254 (S7 max).</param>
+public sealed record S7TagDefinition(
+    string Name,
+    string Address,
+    S7DataType DataType,
+    bool Writable = true,
+    int StringLength = 254);
+
+public enum S7DataType
+{
+    Bool,
+    Byte,
+    Int16,
+    UInt16,
+    Int32,
+    UInt32,
+    Int64,
+    UInt64,
+    Float32,
+    Float64,
+    String,
+    DateTime,
+}

src/ZB.MOM.WW.OtOpcUa.Driver.S7/ZB.MOM.WW.OtOpcUa.Driver.S7.csproj

@@ -0,0 +1,27 @@
+<Project Sdk="Microsoft.NET.Sdk">
+
+    <PropertyGroup>
+        <TargetFramework>net10.0</TargetFramework>
+        <Nullable>enable</Nullable>
+        <ImplicitUsings>enable</ImplicitUsings>
+        <LangVersion>latest</LangVersion>
+        <TreatWarningsAsErrors>true</TreatWarningsAsErrors>
+        <GenerateDocumentationFile>true</GenerateDocumentationFile>
+        <NoWarn>$(NoWarn);CS1591</NoWarn>
+        <RootNamespace>ZB.MOM.WW.OtOpcUa.Driver.S7</RootNamespace>
+        <AssemblyName>ZB.MOM.WW.OtOpcUa.Driver.S7</AssemblyName>
+    </PropertyGroup>
+
+    <ItemGroup>
+        <ProjectReference Include="..\ZB.MOM.WW.OtOpcUa.Core.Abstractions\ZB.MOM.WW.OtOpcUa.Core.Abstractions.csproj"/>
+    </ItemGroup>
+
+    <ItemGroup>
+        <PackageReference Include="S7netplus" Version="0.20.0"/>
+    </ItemGroup>
+
+    <ItemGroup>
+        <InternalsVisibleTo Include="ZB.MOM.WW.OtOpcUa.Driver.S7.Tests"/>
+    </ItemGroup>
+
+</Project>

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/Mitsubishi/MitsubishiProfile.cs

@@ -0,0 +1,43 @@
+namespace ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests.Mitsubishi;
+
+/// <summary>
+///     Tag map for the Mitsubishi MELSEC device class with a representative Modbus Device
+///     Assignment block mapping D0..D1023 → HR[0..1023]. Mirrors the behaviors in
+///     <c>mitsubishi.json</c> pymodbus profile and <c>docs/v2/mitsubishi.md</c>.
+/// </summary>
+/// <remarks>
+///     MELSEC Modbus sites all have *different* device-assignment parameter blocks; this profile
+///     models the conventional default. Per-model differences (FX5U needs firmware ≥ 1.060 for
+///     Modbus server; QJ71MT91 lacks FC22/FC23; FX/iQ-F use octal X/Y while Q/L/iQ-R use hex)
+///     are handled in <see cref="MelsecAddress"/> (PR 59) and the per-model test files.
+/// </remarks>
+public static class MitsubishiProfile
+{
+    /// <summary>
+    ///     Scratch HR the smoke test writes + reads. Address 200 mirrors the
+    ///     dl205/s7_1500/standard scratch range so one smoke test pattern works across every
+    ///     device profile the simulator supports.
+    /// </summary>
+    public const ushort SmokeHoldingRegister = 200;
+
+    /// <summary>Value the smoke test writes then reads back.</summary>
+    public const short SmokeHoldingValue = 7890;
+
+    public static ModbusDriverOptions BuildOptions(string host, int port) => new()
+    {
+        Host = host,
+        Port = port,
+        UnitId = 1,
+        Timeout = TimeSpan.FromSeconds(2),
+        Tags =
+        [
+            new ModbusTagDefinition(
+                Name: "Smoke_HReg200",
+                Region: ModbusRegion.HoldingRegisters,
+                Address: SmokeHoldingRegister,
+                DataType: ModbusDataType.Int16,
+                Writable: true),
+        ],
+        Probe = new ModbusProbeOptions { Enabled = false },
+    };
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/Mitsubishi/MitsubishiQuirkTests.cs

@@ -0,0 +1,179 @@
+using Shouldly;
+using Xunit;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests.Mitsubishi;
+
+/// <summary>
+///     Verifies the MELSEC-family Modbus quirks against the <c>mitsubishi.json</c> pymodbus
+///     profile: CDAB word order default, binary-not-BCD D-register encoding, hex X-input
+///     parsing (Q/L/iQ-R), D0 fingerprint, M-relay coil mapping with bank base.
+/// </summary>
+/// <remarks>
+///     Groups all quirks in one test class instead of per-behavior classes (unlike the DL205
+///     set) because MELSEC's per-model differentiation is handled by the
+///     <see cref="MelsecFamily"/> enum on the helper + <c>MODBUS_SIM_PROFILE</c> env var on
+///     the fixture, rather than per-PR test classes.
+/// </remarks>
+[Collection(ModbusSimulatorCollection.Name)]
+[Trait("Category", "Integration")]
+[Trait("Device", "Mitsubishi")]
+public sealed class MitsubishiQuirkTests(ModbusSimulatorFixture sim)
+{
+    [Fact]
+    public async Task Mitsubishi_D0_fingerprint_reads_0x1234()
+    {
+        if (!ShouldRun()) return;
+        await using var driver = await NewDriverAsync(
+            new ModbusTagDefinition("D0_Fingerprint",
+                ModbusRegion.HoldingRegisters,
+                Address: MelsecAddress.DRegisterToHolding("D0"),
+                DataType: ModbusDataType.UInt16, Writable: false));
+
+        var r = await driver.ReadAsync(["D0_Fingerprint"], TestContext.Current.CancellationToken);
+        r[0].StatusCode.ShouldBe(0u);
+        r[0].Value.ShouldBe((ushort)0x1234);
+    }
+
+    [Fact]
+    public async Task Mitsubishi_Float32_CDAB_decodes_1_5f_from_D100()
+    {
+        if (!ShouldRun()) return;
+        // MELSEC Q/L/iQ-R/iQ-F all store 32-bit values with CDAB word order (low word at
+        // lower D-register address). HR[100..101] = [0, 0x3FC0] decodes as 1.5f under
+        // WordSwap but as a denormal under BigEndian.
+        var addr = MelsecAddress.DRegisterToHolding("D100");
+        await using var driver = await NewDriverAsync(
+            new ModbusTagDefinition("D100_Float_CDAB",
+                ModbusRegion.HoldingRegisters, Address: addr,
+                DataType: ModbusDataType.Float32, Writable: false,
+                ByteOrder: ModbusByteOrder.WordSwap),
+            new ModbusTagDefinition("D100_Float_ABCD_control",
+                ModbusRegion.HoldingRegisters, Address: addr,
+                DataType: ModbusDataType.Float32, Writable: false,
+                ByteOrder: ModbusByteOrder.BigEndian));
+
+        var r = await driver.ReadAsync(
+            ["D100_Float_CDAB", "D100_Float_ABCD_control"],
+            TestContext.Current.CancellationToken);
+        r[0].Value.ShouldBe(1.5f, "MELSEC stores Float32 CDAB; WordSwap decode returns 1.5f");
+        r[1].Value.ShouldNotBe(1.5f, "same wire with BigEndian must decode to a different value");
+    }
+
+    [Fact]
+    public async Task Mitsubishi_D10_is_binary_not_BCD()
+    {
+        if (!ShouldRun()) return;
+        // Counter-to-DL205: MELSEC D-registers are binary by default. D10 = 1234 decimal =
+        // 0x04D2. Reading as Int16 returns 1234; reading as Bcd16 would throw (nibble 0xD is
+        // non-BCD) — the integration test proves the Int16 decode wins.
+        await using var driver = await NewDriverAsync(
+            new ModbusTagDefinition("D10_Binary",
+                ModbusRegion.HoldingRegisters,
+                Address: MelsecAddress.DRegisterToHolding("D10"),
+                DataType: ModbusDataType.Int16, Writable: false));
+
+        var r = await driver.ReadAsync(["D10_Binary"], TestContext.Current.CancellationToken);
+        r[0].StatusCode.ShouldBe(0u);
+        r[0].Value.ShouldBe((short)1234, "MELSEC stores numeric D-register values in binary; 0x04D2 = 1234");
+    }
+
+    [Fact]
+    public async Task Mitsubishi_D10_as_BCD_throws_because_nibble_is_non_decimal()
+    {
+        if (!ShouldRun()) return;
+        // If a site configured D10 with Bcd16 data type but the ladder writes binary, the
+        // BCD decoder MUST reject the garbage rather than silently returning wrong decimal.
+        // 0x04D2 contains nibble 0xD which fails BCD validation.
+        await using var driver = await NewDriverAsync(
+            new ModbusTagDefinition("D10_WrongBcd",
+                ModbusRegion.HoldingRegisters,
+                Address: MelsecAddress.DRegisterToHolding("D10"),
+                DataType: ModbusDataType.Bcd16, Writable: false));
+
+        var r = await driver.ReadAsync(["D10_WrongBcd"], TestContext.Current.CancellationToken);
+        // ReadAsync catches the InvalidDataException from DecodeBcd and surfaces it as
+        // BadCommunicationError (PR 52 mapping). Non-zero status = caller sees a real
+        // problem and can check their tag config instead of getting silently-wrong numbers.
+        r[0].StatusCode.ShouldNotBe(0u, "BCD decode of binary 0x04D2 must fail loudly because nibble D is non-BCD");
+    }
+
+    [Fact]
+    public async Task Mitsubishi_QLiQR_X210_hex_maps_to_DI_528_reads_ON()
+    {
+        if (!ShouldRun()) return;
+        // MELSEC-Q / L / iQ-R: X addresses are hex. X210 = 0x210 = 528 decimal.
+        // mitsubishi.json seeds cell 33 (DI 528..543) with value 9 = bit 0 + bit 3 set.
+        // X210 → DI 528 → cell 33 bit 0 = 1 (ON).
+        var addr = MelsecAddress.XInputToDiscrete("X210", MelsecFamily.Q_L_iQR);
+        addr.ShouldBe((ushort)528);
+
+        await using var driver = await NewDriverAsync(
+            new ModbusTagDefinition("X210_hex",
+                ModbusRegion.DiscreteInputs, Address: addr,
+                DataType: ModbusDataType.Bool, Writable: false));
+
+        var r = await driver.ReadAsync(["X210_hex"], TestContext.Current.CancellationToken);
+        r[0].StatusCode.ShouldBe(0u);
+        r[0].Value.ShouldBe(true);
+    }
+
+    [Fact]
+    public void Mitsubishi_family_trap_X20_differs_on_Q_vs_FX()
+    {
+        // Not a live-sim test — a unit-level proof that the MELSEC family selector gates the
+        // address correctly. Included in the integration suite so anyone running the MELSEC
+        // tests sees the trap called out explicitly.
+        MelsecAddress.XInputToDiscrete("X20", MelsecFamily.Q_L_iQR).ShouldBe((ushort)32);
+        MelsecAddress.XInputToDiscrete("X20", MelsecFamily.F_iQF).ShouldBe((ushort)16);
+    }
+
+    [Fact]
+    public async Task Mitsubishi_M512_maps_to_coil_512_reads_ON()
+    {
+        if (!ShouldRun()) return;
+        // mitsubishi.json seeds cell 32 (coil 512..527) with value 5 = bit 0 + bit 2 set.
+        // M512 → coil 512 → cell 32 bit 0 = 1 (ON).
+        var addr = MelsecAddress.MRelayToCoil("M512");
+        addr.ShouldBe((ushort)512);
+
+        await using var driver = await NewDriverAsync(
+            new ModbusTagDefinition("M512",
+                ModbusRegion.Coils, Address: addr,
+                DataType: ModbusDataType.Bool, Writable: false));
+
+        var r = await driver.ReadAsync(["M512"], TestContext.Current.CancellationToken);
+        r[0].StatusCode.ShouldBe(0u);
+        r[0].Value.ShouldBe(true);
+    }
+
+    // --- helpers ---
+
+    private bool ShouldRun()
+    {
+        if (sim.SkipReason is not null) { Assert.Skip(sim.SkipReason); return false; }
+        if (!string.Equals(Environment.GetEnvironmentVariable("MODBUS_SIM_PROFILE"), "mitsubishi",
+                StringComparison.OrdinalIgnoreCase))
+        {
+            Assert.Skip("MODBUS_SIM_PROFILE != mitsubishi — skipping.");
+            return false;
+        }
+        return true;
+    }
+
+    private async Task<ModbusDriver> NewDriverAsync(params ModbusTagDefinition[] tags)
+    {
+        var drv = new ModbusDriver(
+            new ModbusDriverOptions
+            {
+                Host = sim.Host,
+                Port = sim.Port,
+                UnitId = 1,
+                Timeout = TimeSpan.FromSeconds(2),
+                Tags = tags,
+                Probe = new ModbusProbeOptions { Enabled = false },
+            },
+            driverInstanceId: "melsec-quirk");
+        await drv.InitializeAsync("{}", TestContext.Current.CancellationToken);
+        return drv;
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/Mitsubishi/MitsubishiSmokeTests.cs

@@ -0,0 +1,45 @@
+using Shouldly;
+using Xunit;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests.Mitsubishi;
+
+/// <summary>
+///     End-to-end smoke against the MELSEC <c>mitsubishi.json</c> pymodbus profile (or a real
+///     MELSEC QJ71MT91 / iQ-R / FX5U when <c>MODBUS_SIM_ENDPOINT</c> points at one). Drives
+///     the full <see cref="ModbusDriver"/> + real <see cref="ModbusTcpTransport"/> stack.
+///     Success proves the driver initializes against the MELSEC sim, writes a known value,
+///     and reads it back — the baseline every Mitsubishi-specific test (PR 59+) builds on.
+/// </summary>
+[Collection(ModbusSimulatorCollection.Name)]
+[Trait("Category", "Integration")]
+[Trait("Device", "Mitsubishi")]
+public sealed class MitsubishiSmokeTests(ModbusSimulatorFixture sim)
+{
+    [Fact]
+    public async Task Mitsubishi_roundtrip_write_then_read_of_holding_register()
+    {
+        if (sim.SkipReason is not null) Assert.Skip(sim.SkipReason);
+        if (!string.Equals(Environment.GetEnvironmentVariable("MODBUS_SIM_PROFILE"), "mitsubishi",
+                StringComparison.OrdinalIgnoreCase))
+        {
+            Assert.Skip("MODBUS_SIM_PROFILE != mitsubishi — skipping.");
+        }
+
+        var options = MitsubishiProfile.BuildOptions(sim.Host, sim.Port);
+        await using var driver = new ModbusDriver(options, driverInstanceId: "melsec-smoke");
+        await driver.InitializeAsync(driverConfigJson: "{}", TestContext.Current.CancellationToken);
+
+        var writeResults = await driver.WriteAsync(
+            [new(FullReference: "Smoke_HReg200", Value: (short)MitsubishiProfile.SmokeHoldingValue)],
+            TestContext.Current.CancellationToken);
+        writeResults.Count.ShouldBe(1);
+        writeResults[0].StatusCode.ShouldBe(0u, "write must succeed against the MELSEC pymodbus profile");
+
+        var readResults = await driver.ReadAsync(
+            ["Smoke_HReg200"],
+            TestContext.Current.CancellationToken);
+        readResults.Count.ShouldBe(1);
+        readResults[0].StatusCode.ShouldBe(0u);
+        readResults[0].Value.ShouldBe((short)MitsubishiProfile.SmokeHoldingValue);
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/Pymodbus/mitsubishi.json

@@ -0,0 +1,83 @@
+{
+  "_comment": "mitsubishi.json -- Mitsubishi MELSEC Modbus TCP quirk simulator covering QJ71MT91, iQ-R, iQ-F/FX5U, and FX3U-ENET-P502 behaviors documented in docs/v2/mitsubishi.md. MELSEC CPUs store multi-word values in CDAB order (opposite of S7 ABCD, same family as DL260). The Modbus-module 'Modbus Device Assignment Parameter' block is per-site, so this profile models one *representative* assignment mapping D-register D0..D1023 -> HR 0..1023, M-relay M0..M511 -> coil 0..511, X-input X0..X15 -> DI 0..15 (X-addresses are HEX on Q/L/iQ-R, so X10 = decimal 16; on FX/iQ-F they're OCTAL like DL260). pymodbus bit-address semantics are the same as dl205.json and s7_1500.json (FC01/02/05/15 address N maps to cell index N/16).",
+
+  "server_list": {
+    "srv": {
+      "comm": "tcp",
+      "host": "0.0.0.0",
+      "port": 5020,
+      "framer": "socket",
+      "device_id": 1
+    }
+  },
+
+  "device_list": {
+    "dev": {
+      "setup": {
+        "co size":    4096,
+        "di size":    4096,
+        "hr size":    4096,
+        "ir size":    1024,
+        "shared blocks": true,
+        "type exception": false,
+        "defaults": {
+          "value":  {"bits": 0, "uint16": 0, "uint32": 0, "float32": 0.0, "string": " "},
+          "action": {"bits": null, "uint16": null, "uint32": null, "float32": null, "string": null}
+        }
+      },
+      "invalid": [],
+      "write": [
+        [0, 0],
+        [10, 10],
+        [100, 101],
+        [200, 209],
+        [300, 301],
+        [500, 500]
+      ],
+
+      "uint16": [
+        {"_quirk": "D0 fingerprint marker. MELSEC D0 is the first data register; Modbus Device Assignment typically maps D0..D1023 -> HR 0..1023. 0x1234 is the fingerprint operators set in GX Works to prove the mapping parameter block is in effect.",
+         "addr": 0, "value": 4660},
+
+        {"_quirk": "Scratch HR range 200..209 -- mirrors the dl205/s7_1500/standard scratch range so smoke tests (MitsubishiProfile.SmokeHoldingRegister=200) round-trip identically against any profile.",
+         "addr": 200, "value": 0},
+        {"addr": 201, "value": 0},
+        {"addr": 202, "value": 0},
+        {"addr": 203, "value": 0},
+        {"addr": 204, "value": 0},
+        {"addr": 205, "value": 0},
+        {"addr": 206, "value": 0},
+        {"addr": 207, "value": 0},
+        {"addr": 208, "value": 0},
+        {"addr": 209, "value": 0},
+
+        {"_quirk": "Float32 1.5f in CDAB word order (MELSEC Q/L/iQ-R/iQ-F default, same as DL260). HR[100]=0x0000=0 low word, HR[101]=0x3FC0=16320 high word. Decode with ByteOrder.WordSwap returns 1.5f; BigEndian decode returns a denormal.",
+         "addr": 100, "value": 0},
+        {"addr": 101, "value": 16320},
+
+        {"_quirk": "Int32 0x12345678 in CDAB word order. HR[300]=0x5678=22136 low word, HR[301]=0x1234=4660 high word. Contrasts with the S7 profile's ABCD encoding at the same address.",
+         "addr": 300, "value": 22136},
+        {"addr": 301, "value": 4660},
+
+        {"_quirk": "D10 = decimal 1234 stored as BINARY (NOT BCD like DL205). 0x04D2 = 1234 decimal. Caller reading with Bcd16 data type would decode this as binary 1234's BCD nibbles which are non-BCD and throw InvalidDataException -- proves MELSEC is binary-by-default, opposite of DL205's BCD-by-default quirk.",
+         "addr": 10, "value": 1234},
+
+        {"_quirk": "Modbus Device Assignment boundary marker. HR[500] represents the last register in an assigned D-range D500. Beyond this (HR[501..4095]) would be Illegal Data Address on a real QJ71MT91 with this specific parameter block; pymodbus returns default 0 because its shared cell array has space -- real-PLC parity is documented in docs/v2/mitsubishi.md §device-assignment, not enforced here.",
+         "addr": 500, "value": 500}
+      ],
+
+      "bits": [
+        {"_quirk": "M-relay marker cell at cell 32 = Modbus coil 512 = MELSEC M512 (coils 0..15 collide with the D0 uint16 marker cell, so we place the M marker above that). Cell 32 bit 0 = 1 and bit 2 = 1 (value = 0b101 = 5) = M512=ON, M513=OFF, M514=ON. Matches the Y0/Y2 marker pattern in dl205 and s7_1500 profiles.",
+         "addr": 32, "value": 5},
+
+        {"_quirk": "X-input marker cell at cell 33 = Modbus DI 528 (= MELSEC X210 hex on Q/L/iQ-R). Cell 33 bit 0 = 1 and bit 3 = 1 (value = 0x9 = 9). Chosen above cell 1 so it doesn't collide with any uint16 D-register. Proves the hex-parsing X-input helper on Q/L/iQ-R family; FX/iQ-F families use octal X-addresses tested separately.",
+         "addr": 33, "value": 9}
+      ],
+
+      "uint32":  [],
+      "float32": [],
+      "string":  [],
+      "repeat":  []
+    }
+  }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/Pymodbus/s7_1500.json

@@ -0,0 +1,77 @@
+{
+  "_comment": "s7_1500.json -- Siemens SIMATIC S7-1500 + MB_SERVER quirk simulator. Models docs/v2/s7.md behaviors as concrete register values. Unlike DL260 (CDAB word order default) or Mitsubishi (CDAB default), S7 MB_SERVER uses ABCD word order by default because Siemens native CPU types are big-endian top-to-bottom both within the register pair and byte pair. This profile exists so the driver's S7 profile default ByteOrder.BigEndian can be validated end-to-end. pymodbus bit-address semantics are the same as dl205.json (FC01/02/05/15 address X maps to cell index X/16); seed bits at the appropriate cell-indexed positions.",
+
+  "server_list": {
+    "srv": {
+      "comm": "tcp",
+      "host": "0.0.0.0",
+      "port": 5020,
+      "framer": "socket",
+      "device_id": 1
+    }
+  },
+
+  "device_list": {
+    "dev": {
+      "setup": {
+        "co size":    4096,
+        "di size":    4096,
+        "hr size":    4096,
+        "ir size":    1024,
+        "shared blocks": true,
+        "type exception": false,
+        "defaults": {
+          "value":  {"bits": 0, "uint16": 0, "uint32": 0, "float32": 0.0, "string": " "},
+          "action": {"bits": null, "uint16": null, "uint32": null, "float32": null, "string": null}
+        }
+      },
+      "invalid": [],
+      "write": [
+        [0, 0],
+        [25, 25],
+        [100, 101],
+        [200, 209],
+        [300, 301]
+      ],
+
+      "uint16": [
+        {"_quirk": "DB1 header marker. On an S7-1500 with MB_SERVER pointing at DB1, operators often reserve DB1.DBW0 for a fingerprint word so clients can verify they're talking to the right DB. 0xABCD = 43981.",
+         "addr": 0, "value": 43981},
+
+        {"_quirk": "Scratch HR range 200..209 -- mirrors the standard.json scratch range so the smoke test (S7_1500Profile.SmokeHoldingRegister=200) round-trips identically against either profile.",
+         "addr": 200, "value": 0},
+        {"addr": 201, "value": 0},
+        {"addr": 202, "value": 0},
+        {"addr": 203, "value": 0},
+        {"addr": 204, "value": 0},
+        {"addr": 205, "value": 0},
+        {"addr": 206, "value": 0},
+        {"addr": 207, "value": 0},
+        {"addr": 208, "value": 0},
+        {"addr": 209, "value": 0},
+
+        {"_quirk": "Float32 1.5f in ABCD word order (Siemens big-endian default, OPPOSITE of DL260 CDAB). IEEE-754 1.5 = 0x3FC00000. ABCD = high word first: HR[100]=0x3FC0=16320, HR[101]=0x0000=0.",
+         "addr": 100, "value": 16320},
+        {"_quirk": "Float32 1.5f ABCD low word.",
+         "addr": 101, "value": 0},
+
+        {"_quirk": "Int32 0x12345678 in ABCD word order. HR[300]=0x1234=4660, HR[301]=0x5678=22136. Demonstrates the contrast with DL260 CDAB Int32 encoding.",
+         "addr": 300, "value": 4660},
+        {"addr": 301, "value": 22136}
+      ],
+
+      "bits": [
+        {"_quirk": "Coil bank marker cell. S7 MB_SERVER doesn't fix coil addresses; this simulates a user-wired DB where coil 400 (=bit 0 of cell 25) represents a latched digital output. Cell 25 bit 0 = 1 proves the wire-format round-trip works for coils on S7 profile.",
+         "addr": 25, "value": 1},
+
+        {"_quirk": "Discrete-input bank marker cell. DI 500 (=bit 0 of cell 31) = 1. Like coils, discrete inputs on S7 MB_SERVER are per-site; we assert the end-to-end FC02 path only.",
+         "addr": 31, "value": 1}
+      ],
+
+      "uint32":  [],
+      "float32": [],
+      "string":  [],
+      "repeat":  []
+    }
+  }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/Pymodbus/serve.ps1

@@ -21,7 +21,7 @@
 #>
 [CmdletBinding()]
 param(
-    [Parameter(Mandatory)] [ValidateSet('standard', 'dl205')] [string]$Profile,
+    [Parameter(Mandatory)] [ValidateSet('standard', 'dl205', 's7_1500', 'mitsubishi')] [string]$Profile,
     [int]$HttpPort = 8080
 )
 

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/S7/S7_1500Profile.cs

@@ -0,0 +1,44 @@
+namespace ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests.S7;
+
+/// <summary>
+///     Tag map for the Siemens SIMATIC S7-1500 device class with the <c>MB_SERVER</c> library
+///     block mapping HR[0..] to DB1.DBW0+. Mirrors <c>s7_1500.json</c> in <c>Pymodbus/</c>.
+/// </summary>
+/// <remarks>
+///     Unlike DL205, S7 has no fixed Modbus memory map — every site wires MB_SERVER to a
+///     different DB. The profile here models the *default* user layout documented in
+///     <c>docs/v2/s7.md</c> §per-model-matrix: DB1.DBW0 = fingerprint marker, a scratch HR
+///     range 200..209 for write-roundtrip tests, and ABCD-order Float32 / Int32 markers at
+///     HR[100..101] and HR[300..301] to prove the driver's S7 profile default is correct.
+/// </remarks>
+public static class S7_1500Profile
+{
+    /// <summary>
+    ///     Scratch HR the smoke test writes + reads. Address 200 mirrors the DL205 /
+    ///     standard scratch range so one smoke test pattern works across all device profiles.
+    /// </summary>
+    public const ushort SmokeHoldingRegister = 200;
+
+    /// <summary>Value the smoke test writes then reads back.</summary>
+    public const short SmokeHoldingValue = 4321;
+
+    public static ModbusDriverOptions BuildOptions(string host, int port) => new()
+    {
+        Host = host,
+        Port = port,
+        UnitId = 1,
+        Timeout = TimeSpan.FromSeconds(2),
+        Tags =
+        [
+            new ModbusTagDefinition(
+                Name: "Smoke_HReg200",
+                Region: ModbusRegion.HoldingRegisters,
+                Address: SmokeHoldingRegister,
+                DataType: ModbusDataType.Int16,
+                Writable: true),
+        ],
+        // Disable the background probe loop — integration tests drive reads explicitly and
+        // the probe would race with assertions.
+        Probe = new ModbusProbeOptions { Enabled = false },
+    };
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/S7/S7_1500SmokeTests.cs

@@ -0,0 +1,54 @@
+using Shouldly;
+using Xunit;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests.S7;
+
+/// <summary>
+///     End-to-end smoke against the S7-1500 <c>MB_SERVER</c> pymodbus profile (or a real
+///     S7-1500 + MB_SERVER deployment when <c>MODBUS_SIM_ENDPOINT</c> points at one). Drives
+///     the full <see cref="ModbusDriver"/> + real <see cref="ModbusTcpTransport"/> stack —
+///     no fake transport. Success proves the driver initializes against the S7 simulator,
+///     writes a known value, and reads it back with the correct status and value, which is
+///     the baseline every S7-specific test (PR 57+) builds on.
+/// </summary>
+/// <remarks>
+///     S7-specific quirk tests (MB_SERVER requires non-optimized DBs, ABCD word order
+///     default, port-per-connection, FC23 Illegal Function, STOP-mode behaviour, etc.) land
+///     as separate test classes in this directory as each quirk is validated in pymodbus.
+///     Keep this smoke test deliberately narrow — filtering by device class
+///     (<c>--filter DisplayName~S7</c>) should surface the quirk-specific failure mode when
+///     something goes wrong, not a blanket smoke failure that could mean anything.
+/// </remarks>
+[Collection(ModbusSimulatorCollection.Name)]
+[Trait("Category", "Integration")]
+[Trait("Device", "S7")]
+public sealed class S7_1500SmokeTests(ModbusSimulatorFixture sim)
+{
+    [Fact]
+    public async Task S7_1500_roundtrip_write_then_read_of_holding_register()
+    {
+        if (sim.SkipReason is not null) Assert.Skip(sim.SkipReason);
+        if (!string.Equals(Environment.GetEnvironmentVariable("MODBUS_SIM_PROFILE"), "s7_1500",
+                StringComparison.OrdinalIgnoreCase))
+        {
+            Assert.Skip("MODBUS_SIM_PROFILE != s7_1500 — skipping (other profiles don't seed the S7 scratch range identically).");
+        }
+
+        var options = S7_1500Profile.BuildOptions(sim.Host, sim.Port);
+        await using var driver = new ModbusDriver(options, driverInstanceId: "s7-smoke");
+        await driver.InitializeAsync(driverConfigJson: "{}", TestContext.Current.CancellationToken);
+
+        var writeResults = await driver.WriteAsync(
+            [new(FullReference: "Smoke_HReg200", Value: (short)S7_1500Profile.SmokeHoldingValue)],
+            TestContext.Current.CancellationToken);
+        writeResults.Count.ShouldBe(1);
+        writeResults[0].StatusCode.ShouldBe(0u, "write must succeed against the S7-1500 MB_SERVER profile");
+
+        var readResults = await driver.ReadAsync(
+            ["Smoke_HReg200"],
+            TestContext.Current.CancellationToken);
+        readResults.Count.ShouldBe(1);
+        readResults[0].StatusCode.ShouldBe(0u);
+        readResults[0].Value.ShouldBe((short)S7_1500Profile.SmokeHoldingValue);
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/S7/S7_ByteOrderTests.cs

@@ -0,0 +1,132 @@
+using Shouldly;
+using Xunit;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests.S7;
+
+/// <summary>
+///     Verifies the Siemens S7 big-endian (<c>ABCD</c>) word-order default for Float32 and
+///     Int32 against the <c>s7_1500.json</c> pymodbus profile. S7's native CPU types are
+///     big-endian end-to-end, so <c>MB_SERVER</c> places the high word at the lower register
+///     address — <b>opposite</b> of DL260's CDAB. The driver's S7-family tag config must
+///     therefore default to <see cref="ModbusByteOrder.BigEndian"/>; selecting
+///     <see cref="ModbusByteOrder.WordSwap"/> against an S7 would decode garbage.
+/// </summary>
+[Collection(ModbusSimulatorCollection.Name)]
+[Trait("Category", "Integration")]
+[Trait("Device", "S7")]
+public sealed class S7_ByteOrderTests(ModbusSimulatorFixture sim)
+{
+    [Fact]
+    public async Task S7_Float32_ABCD_decodes_1_5f_from_HR100()
+    {
+        if (sim.SkipReason is not null) Assert.Skip(sim.SkipReason);
+        if (!string.Equals(Environment.GetEnvironmentVariable("MODBUS_SIM_PROFILE"), "s7_1500",
+                StringComparison.OrdinalIgnoreCase))
+        {
+            Assert.Skip("MODBUS_SIM_PROFILE != s7_1500 — skipping (s7_1500 profile is the only one seeding HR[100..101] ABCD).");
+        }
+
+        var options = new ModbusDriverOptions
+        {
+            Host = sim.Host,
+            Port = sim.Port,
+            UnitId = 1,
+            Timeout = TimeSpan.FromSeconds(2),
+            Tags =
+            [
+                new ModbusTagDefinition("S7_Float_ABCD",
+                    ModbusRegion.HoldingRegisters, Address: 100,
+                    DataType: ModbusDataType.Float32, Writable: false,
+                    ByteOrder: ModbusByteOrder.BigEndian),
+                // Control: same address with WordSwap should decode garbage — proves the
+                // two code paths diverge on S7 wire bytes.
+                new ModbusTagDefinition("S7_Float_CDAB_control",
+                    ModbusRegion.HoldingRegisters, Address: 100,
+                    DataType: ModbusDataType.Float32, Writable: false,
+                    ByteOrder: ModbusByteOrder.WordSwap),
+            ],
+            Probe = new ModbusProbeOptions { Enabled = false },
+        };
+        await using var driver = new ModbusDriver(options, driverInstanceId: "s7-float-abcd");
+        await driver.InitializeAsync("{}", TestContext.Current.CancellationToken);
+
+        var results = await driver.ReadAsync(
+            ["S7_Float_ABCD", "S7_Float_CDAB_control"],
+            TestContext.Current.CancellationToken);
+
+        results[0].StatusCode.ShouldBe(0u);
+        results[0].Value.ShouldBe(1.5f, "S7 MB_SERVER stores Float32 in ABCD word order; BigEndian decode returns 1.5f");
+
+        results[1].StatusCode.ShouldBe(0u);
+        results[1].Value.ShouldNotBe(1.5f, "applying CDAB swap to S7 ABCD bytes must produce a different value — confirms the flag is not a no-op and S7 profile default must be BigEndian");
+    }
+
+    [Fact]
+    public async Task S7_Int32_ABCD_decodes_0x12345678_from_HR300()
+    {
+        if (sim.SkipReason is not null) Assert.Skip(sim.SkipReason);
+        if (!string.Equals(Environment.GetEnvironmentVariable("MODBUS_SIM_PROFILE"), "s7_1500",
+                StringComparison.OrdinalIgnoreCase))
+        {
+            Assert.Skip("MODBUS_SIM_PROFILE != s7_1500 — skipping.");
+        }
+
+        var options = new ModbusDriverOptions
+        {
+            Host = sim.Host,
+            Port = sim.Port,
+            UnitId = 1,
+            Timeout = TimeSpan.FromSeconds(2),
+            Tags =
+            [
+                new ModbusTagDefinition("S7_Int32_ABCD",
+                    ModbusRegion.HoldingRegisters, Address: 300,
+                    DataType: ModbusDataType.Int32, Writable: false,
+                    ByteOrder: ModbusByteOrder.BigEndian),
+            ],
+            Probe = new ModbusProbeOptions { Enabled = false },
+        };
+        await using var driver = new ModbusDriver(options, driverInstanceId: "s7-int-abcd");
+        await driver.InitializeAsync("{}", TestContext.Current.CancellationToken);
+
+        var results = await driver.ReadAsync(["S7_Int32_ABCD"], TestContext.Current.CancellationToken);
+        results[0].StatusCode.ShouldBe(0u);
+        results[0].Value.ShouldBe(0x12345678,
+            "S7 Int32 stored as HR[300]=0x1234, HR[301]=0x5678 with ABCD order decodes to 0x12345678 — DL260 would store the reverse order");
+    }
+
+    [Fact]
+    public async Task S7_DB1_fingerprint_marker_at_HR0_reads_0xABCD()
+    {
+        if (sim.SkipReason is not null) Assert.Skip(sim.SkipReason);
+        if (!string.Equals(Environment.GetEnvironmentVariable("MODBUS_SIM_PROFILE"), "s7_1500",
+                StringComparison.OrdinalIgnoreCase))
+        {
+            Assert.Skip("MODBUS_SIM_PROFILE != s7_1500 — skipping.");
+        }
+
+        // Real-world MB_SERVER deployments typically reserve DB1.DBW0 as a fingerprint so
+        // clients can verify they're pointing at the right DB (protects against typos in
+        // the MB_SERVER.MB_HOLD_REG.DB_number parameter). 0xABCD is the convention.
+        var options = new ModbusDriverOptions
+        {
+            Host = sim.Host,
+            Port = sim.Port,
+            UnitId = 1,
+            Timeout = TimeSpan.FromSeconds(2),
+            Tags =
+            [
+                new ModbusTagDefinition("S7_Fingerprint",
+                    ModbusRegion.HoldingRegisters, Address: 0,
+                    DataType: ModbusDataType.UInt16, Writable: false),
+            ],
+            Probe = new ModbusProbeOptions { Enabled = false },
+        };
+        await using var driver = new ModbusDriver(options, driverInstanceId: "s7-fingerprint");
+        await driver.InitializeAsync("{}", TestContext.Current.CancellationToken);
+
+        var results = await driver.ReadAsync(["S7_Fingerprint"], TestContext.Current.CancellationToken);
+        results[0].StatusCode.ShouldBe(0u);
+        results[0].Value.ShouldBe((ushort)0xABCD);
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests.csproj

@@ -26,6 +26,8 @@
     <ItemGroup>
         <None Update="Pymodbus\**\*" CopyToOutputDirectory="PreserveNewest"/>
         <None Update="DL205\**\*" CopyToOutputDirectory="PreserveNewest"/>
+        <None Update="S7\**\*" CopyToOutputDirectory="PreserveNewest"/>
+        <None Update="Mitsubishi\**\*" CopyToOutputDirectory="PreserveNewest"/>
     </ItemGroup>
 
     <ItemGroup>

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.Tests/MelsecAddressTests.cs

@@ -0,0 +1,116 @@
+using Shouldly;
+using Xunit;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Modbus.Tests;
+
+[Trait("Category", "Unit")]
+public sealed class MelsecAddressTests
+{
+    // --- X / Y hex vs octal family trap ---
+
+    [Theory]
+    [InlineData("X0", (ushort)0)]
+    [InlineData("X9", (ushort)9)]
+    [InlineData("XA", (ushort)10)]      // hex
+    [InlineData("XF", (ushort)15)]
+    [InlineData("X10", (ushort)16)]     // hex 0x10 = decimal 16
+    [InlineData("X20", (ushort)32)]     // hex 0x20 = decimal 32 — the classic MELSEC-Q trap
+    [InlineData("X1FF", (ushort)511)]
+    [InlineData("x10", (ushort)16)]     // lowercase prefix
+    public void XInputToDiscrete_QLiQR_parses_hex(string x, ushort expected)
+        => MelsecAddress.XInputToDiscrete(x, MelsecFamily.Q_L_iQR).ShouldBe(expected);
+
+    [Theory]
+    [InlineData("X0", (ushort)0)]
+    [InlineData("X7", (ushort)7)]
+    [InlineData("X10", (ushort)8)]      // octal 10 = decimal 8
+    [InlineData("X20", (ushort)16)]     // octal 20 = decimal 16 — SAME string, DIFFERENT value on FX
+    [InlineData("X777", (ushort)511)]
+    public void XInputToDiscrete_FiQF_parses_octal(string x, ushort expected)
+        => MelsecAddress.XInputToDiscrete(x, MelsecFamily.F_iQF).ShouldBe(expected);
+
+    [Theory]
+    [InlineData("Y0", (ushort)0)]
+    [InlineData("Y1F", (ushort)31)]
+    public void YOutputToCoil_QLiQR_parses_hex(string y, ushort expected)
+        => MelsecAddress.YOutputToCoil(y, MelsecFamily.Q_L_iQR).ShouldBe(expected);
+
+    [Theory]
+    [InlineData("Y0", (ushort)0)]
+    [InlineData("Y17", (ushort)15)]
+    public void YOutputToCoil_FiQF_parses_octal(string y, ushort expected)
+        => MelsecAddress.YOutputToCoil(y, MelsecFamily.F_iQF).ShouldBe(expected);
+
+    [Fact]
+    public void Same_address_string_decodes_differently_between_families()
+    {
+        // This is the headline quirk: "X20" in GX Works means one thing on Q-series and
+        // another on FX-series. The driver's family selector is the only defence.
+        MelsecAddress.XInputToDiscrete("X20", MelsecFamily.Q_L_iQR).ShouldBe((ushort)32);
+        MelsecAddress.XInputToDiscrete("X20", MelsecFamily.F_iQF).ShouldBe((ushort)16);
+    }
+
+    [Theory]
+    [InlineData("X8")]     // 8 is non-octal
+    [InlineData("X12G")]   // G is non-hex
+    public void XInputToDiscrete_FiQF_rejects_non_octal(string bad)
+        => Should.Throw<ArgumentException>(() => MelsecAddress.XInputToDiscrete(bad, MelsecFamily.F_iQF));
+
+    [Theory]
+    [InlineData("X12G")]
+    public void XInputToDiscrete_QLiQR_rejects_non_hex(string bad)
+        => Should.Throw<ArgumentException>(() => MelsecAddress.XInputToDiscrete(bad, MelsecFamily.Q_L_iQR));
+
+    [Fact]
+    public void XInputToDiscrete_honors_bank_base_from_assignment_block()
+    {
+        // Real-world QJ71MT91 assignment blocks commonly place X at DI 8192+ when other
+        // ranges take the low Modbus addresses. Helper must add the base cleanly.
+        MelsecAddress.XInputToDiscrete("X10", MelsecFamily.Q_L_iQR, xBankBase: 8192).ShouldBe((ushort)(8192 + 16));
+    }
+
+    // --- M-relay (decimal, both families) ---
+
+    [Theory]
+    [InlineData("M0", (ushort)0)]
+    [InlineData("M10", (ushort)10)]     // M addresses are DECIMAL, not hex or octal
+    [InlineData("M511", (ushort)511)]
+    [InlineData("m99", (ushort)99)]     // lowercase
+    public void MRelayToCoil_parses_decimal(string m, ushort expected)
+        => MelsecAddress.MRelayToCoil(m).ShouldBe(expected);
+
+    [Fact]
+    public void MRelayToCoil_honors_bank_base()
+        => MelsecAddress.MRelayToCoil("M0", mBankBase: 512).ShouldBe((ushort)512);
+
+    [Fact]
+    public void MRelayToCoil_rejects_non_numeric()
+        => Should.Throw<ArgumentException>(() => MelsecAddress.MRelayToCoil("M1F"));
+
+    // --- D-register (decimal, both families) ---
+
+    [Theory]
+    [InlineData("D0", (ushort)0)]
+    [InlineData("D100", (ushort)100)]
+    [InlineData("d1023", (ushort)1023)]
+    public void DRegisterToHolding_parses_decimal(string d, ushort expected)
+        => MelsecAddress.DRegisterToHolding(d).ShouldBe(expected);
+
+    [Fact]
+    public void DRegisterToHolding_honors_bank_base()
+        => MelsecAddress.DRegisterToHolding("D10", dBankBase: 4096).ShouldBe((ushort)4106);
+
+    [Fact]
+    public void DRegisterToHolding_rejects_empty()
+        => Should.Throw<ArgumentException>(() => MelsecAddress.DRegisterToHolding("D"));
+
+    // --- overflow ---
+
+    [Fact]
+    public void XInputToDiscrete_overflow_throws()
+    {
+        // 0xFFFF + base 1 = 0x10000 — past ushort.
+        Should.Throw<OverflowException>(() =>
+            MelsecAddress.XInputToDiscrete("XFFFF", MelsecFamily.Q_L_iQR, xBankBase: 1));
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests/OpcUaClientAttributeMappingTests.cs

@@ -0,0 +1,62 @@
+using Opc.Ua;
+using Shouldly;
+using Xunit;
+using ZB.MOM.WW.OtOpcUa.Core.Abstractions;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests;
+
+[Trait("Category", "Unit")]
+public sealed class OpcUaClientAttributeMappingTests
+{
+    [Theory]
+    [InlineData((uint)DataTypes.Boolean, DriverDataType.Boolean)]
+    [InlineData((uint)DataTypes.Int16, DriverDataType.Int16)]
+    [InlineData((uint)DataTypes.UInt16, DriverDataType.UInt16)]
+    [InlineData((uint)DataTypes.Int32, DriverDataType.Int32)]
+    [InlineData((uint)DataTypes.UInt32, DriverDataType.UInt32)]
+    [InlineData((uint)DataTypes.Int64, DriverDataType.Int64)]
+    [InlineData((uint)DataTypes.UInt64, DriverDataType.UInt64)]
+    [InlineData((uint)DataTypes.Float, DriverDataType.Float32)]
+    [InlineData((uint)DataTypes.Double, DriverDataType.Float64)]
+    [InlineData((uint)DataTypes.String, DriverDataType.String)]
+    [InlineData((uint)DataTypes.DateTime, DriverDataType.DateTime)]
+    public void MapUpstreamDataType_recognizes_standard_builtin_types(uint typeId, DriverDataType expected)
+    {
+        var nodeId = new NodeId(typeId);
+        OpcUaClientDriver.MapUpstreamDataType(nodeId).ShouldBe(expected);
+    }
+
+    [Fact]
+    public void MapUpstreamDataType_maps_SByte_and_Byte_to_Int16_since_DriverDataType_lacks_8bit()
+    {
+        // DriverDataType has no 8-bit type; conservative widen to Int16. Documented so a
+        // future Core.Abstractions PR that adds Int8/Byte can find this call site.
+        OpcUaClientDriver.MapUpstreamDataType(new NodeId((uint)DataTypes.SByte)).ShouldBe(DriverDataType.Int16);
+        OpcUaClientDriver.MapUpstreamDataType(new NodeId((uint)DataTypes.Byte)).ShouldBe(DriverDataType.Int16);
+    }
+
+    [Fact]
+    public void MapUpstreamDataType_falls_back_to_String_for_unknown_custom_types()
+    {
+        // Custom vendor extension object — NodeId in namespace 2 that isn't a standard type.
+        OpcUaClientDriver.MapUpstreamDataType(new NodeId("CustomStruct", 2)).ShouldBe(DriverDataType.String);
+    }
+
+    [Fact]
+    public void MapUpstreamDataType_handles_UtcTime_as_DateTime()
+    {
+        OpcUaClientDriver.MapUpstreamDataType(new NodeId((uint)DataTypes.UtcTime)).ShouldBe(DriverDataType.DateTime);
+    }
+
+    [Theory]
+    [InlineData((byte)0, SecurityClassification.ViewOnly)]           // no access flags set
+    [InlineData((byte)1, SecurityClassification.ViewOnly)]           // CurrentRead only
+    [InlineData((byte)2, SecurityClassification.Operate)]            // CurrentWrite only
+    [InlineData((byte)3, SecurityClassification.Operate)]            // CurrentRead + CurrentWrite
+    [InlineData((byte)0x0F, SecurityClassification.Operate)]          // read+write+historyRead+historyWrite
+    [InlineData((byte)0x04, SecurityClassification.ViewOnly)]         // HistoryRead only — no Write bit
+    public void MapAccessLevelToSecurityClass_respects_CurrentWrite_bit(byte accessLevel, SecurityClassification expected)
+    {
+        OpcUaClientDriver.MapAccessLevelToSecurityClass(accessLevel).ShouldBe(expected);
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests/OpcUaClientCertAuthTests.cs

@@ -0,0 +1,59 @@
+using System.Security.Cryptography;
+using System.Security.Cryptography.X509Certificates;
+using Shouldly;
+using Xunit;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests;
+
+[Trait("Category", "Unit")]
+public sealed class OpcUaClientCertAuthTests
+{
+    [Fact]
+    public void BuildCertificateIdentity_rejects_missing_path()
+    {
+        var opts = new OpcUaClientDriverOptions { AuthType = OpcUaAuthType.Certificate };
+        Should.Throw<InvalidOperationException>(() => OpcUaClientDriver.BuildCertificateIdentity(opts))
+            .Message.ShouldContain("UserCertificatePath");
+    }
+
+    [Fact]
+    public void BuildCertificateIdentity_rejects_nonexistent_file()
+    {
+        var opts = new OpcUaClientDriverOptions
+        {
+            AuthType = OpcUaAuthType.Certificate,
+            UserCertificatePath = Path.Combine(Path.GetTempPath(), $"does-not-exist-{Guid.NewGuid():N}.pfx"),
+        };
+        Should.Throw<FileNotFoundException>(() => OpcUaClientDriver.BuildCertificateIdentity(opts));
+    }
+
+    [Fact]
+    public void BuildCertificateIdentity_loads_a_valid_PFX_with_private_key()
+    {
+        // Generate a self-signed cert on the fly so the test doesn't ship a static PFX.
+        // The driver doesn't care about the issuer — just needs a cert with a private key.
+        using var rsa = RSA.Create(2048);
+        var req = new CertificateRequest("CN=OpcUaClientCertAuthTests", rsa,
+            HashAlgorithmName.SHA256, RSASignaturePadding.Pkcs1);
+        var cert = req.CreateSelfSigned(DateTimeOffset.UtcNow.AddMinutes(-5), DateTimeOffset.UtcNow.AddHours(1));
+
+        var tmpPath = Path.Combine(Path.GetTempPath(), $"opcua-cert-test-{Guid.NewGuid():N}.pfx");
+        File.WriteAllBytes(tmpPath, cert.Export(X509ContentType.Pfx, "testpw"));
+        try
+        {
+            var opts = new OpcUaClientDriverOptions
+            {
+                AuthType = OpcUaAuthType.Certificate,
+                UserCertificatePath = tmpPath,
+                UserCertificatePassword = "testpw",
+            };
+            var identity = OpcUaClientDriver.BuildCertificateIdentity(opts);
+            identity.ShouldNotBeNull();
+            identity.TokenType.ShouldBe(Opc.Ua.UserTokenType.Certificate);
+        }
+        finally
+        {
+            try { File.Delete(tmpPath); } catch { /* best-effort */ }
+        }
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests/OpcUaClientDiscoveryTests.cs

@@ -0,0 +1,55 @@
+using Shouldly;
+using Xunit;
+using ZB.MOM.WW.OtOpcUa.Core.Abstractions;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests;
+
+/// <summary>
+///     Scaffold tests for <see cref="OpcUaClientDriver"/>'s <see cref="ITagDiscovery"/>
+///     surface that don't require a live remote server. Live-browse coverage lands in a
+///     follow-up PR once the in-process OPC UA server fixture is scaffolded.
+/// </summary>
+[Trait("Category", "Unit")]
+public sealed class OpcUaClientDiscoveryTests
+{
+    [Fact]
+    public async Task DiscoverAsync_without_initialize_throws_InvalidOperationException()
+    {
+        using var drv = new OpcUaClientDriver(new OpcUaClientDriverOptions(), "opcua-disco");
+        var builder = new NullAddressSpaceBuilder();
+        await Should.ThrowAsync<InvalidOperationException>(async () =>
+            await drv.DiscoverAsync(builder, TestContext.Current.CancellationToken));
+    }
+
+    [Fact]
+    public void DiscoverAsync_rejects_null_builder()
+    {
+        using var drv = new OpcUaClientDriver(new OpcUaClientDriverOptions(), "opcua-disco");
+        Should.ThrowAsync<ArgumentNullException>(async () =>
+            await drv.DiscoverAsync(null!, TestContext.Current.CancellationToken));
+    }
+
+    [Fact]
+    public void Discovery_caps_are_sensible_defaults()
+    {
+        var opts = new OpcUaClientDriverOptions();
+        opts.MaxDiscoveredNodes.ShouldBe(10_000, "bounds memory on runaway servers without clipping normal models");
+        opts.MaxBrowseDepth.ShouldBe(10, "deep enough for realistic info models; shallow enough for cycle safety");
+        opts.BrowseRoot.ShouldBeNull("null = default to ObjectsFolder i=85");
+    }
+
+    private sealed class NullAddressSpaceBuilder : IAddressSpaceBuilder
+    {
+        public IAddressSpaceBuilder Folder(string browseName, string displayName) => this;
+        public IVariableHandle Variable(string browseName, string displayName, DriverAttributeInfo attributeInfo)
+            => new StubHandle();
+        public void AddProperty(string browseName, DriverDataType dataType, object? value) { }
+        public void AttachAlarmCondition(IVariableHandle sourceVariable, string alarmName, DriverAttributeInfo alarmInfo) { }
+
+        private sealed class StubHandle : IVariableHandle
+        {
+            public string FullReference => "stub";
+            public IAlarmConditionSink MarkAsAlarmCondition(AlarmConditionInfo info) => throw new NotSupportedException();
+        }
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests/OpcUaClientDriverScaffoldTests.cs

@@ -0,0 +1,91 @@
+using Shouldly;
+using Xunit;
+using ZB.MOM.WW.OtOpcUa.Core.Abstractions;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests;
+
+/// <summary>
+///     Scaffold-level tests for <see cref="OpcUaClientDriver"/> that don't require a live
+///     remote OPC UA server. PR 67+ adds IReadable/IWritable/ITagDiscovery/ISubscribable
+///     tests against a local in-process OPC UA server fixture.
+/// </summary>
+[Trait("Category", "Unit")]
+public sealed class OpcUaClientDriverScaffoldTests
+{
+    [Fact]
+    public void Default_options_target_standard_opcua_port_and_anonymous_auth()
+    {
+        var opts = new OpcUaClientDriverOptions();
+        opts.EndpointUrl.ShouldBe("opc.tcp://localhost:4840", "4840 is the IANA-assigned OPC UA port");
+        opts.SecurityMode.ShouldBe(OpcUaSecurityMode.None);
+        opts.SecurityPolicy.ShouldBe(OpcUaSecurityPolicy.None);
+        opts.AuthType.ShouldBe(OpcUaAuthType.Anonymous);
+        opts.AutoAcceptCertificates.ShouldBeFalse("production default must reject untrusted server certs");
+    }
+
+    [Fact]
+    public void Default_timeouts_match_driver_specs_section_8()
+    {
+        var opts = new OpcUaClientDriverOptions();
+        opts.SessionTimeout.ShouldBe(TimeSpan.FromSeconds(120));
+        opts.KeepAliveInterval.ShouldBe(TimeSpan.FromSeconds(5));
+        opts.ReconnectPeriod.ShouldBe(TimeSpan.FromSeconds(5));
+    }
+
+    [Fact]
+    public void Driver_reports_type_and_id_before_connect()
+    {
+        using var drv = new OpcUaClientDriver(new OpcUaClientDriverOptions(), "opcua-test");
+        drv.DriverType.ShouldBe("OpcUaClient");
+        drv.DriverInstanceId.ShouldBe("opcua-test");
+        drv.GetHealth().State.ShouldBe(DriverState.Unknown);
+    }
+
+    [Fact]
+    public async Task Initialize_against_unreachable_endpoint_transitions_to_Faulted_and_throws()
+    {
+        // RFC 5737 reserved-for-documentation IP; won't route anywhere. Pick opc.tcp:// so
+        // endpoint selection hits the transport-layer connection rather than a DNS lookup.
+        var opts = new OpcUaClientDriverOptions
+        {
+            // Port 1 on loopback is effectively guaranteed to be closed — the OS responds
+            // with TCP RST immediately instead of hanging on connect, which keeps the
+            // unreachable-host tests snappy. Don't use an RFC 5737 reserved IP; those get
+            // routed to a black-hole + time out only after the SDK's internal retry/backoff
+            // fully elapses (~60s even with Options.Timeout=500ms).
+            EndpointUrl = "opc.tcp://127.0.0.1:1",
+            Timeout = TimeSpan.FromMilliseconds(500),
+            AutoAcceptCertificates = true, // dev-mode to bypass cert validation in the test
+        };
+        using var drv = new OpcUaClientDriver(opts, "opcua-unreach");
+
+        await Should.ThrowAsync<Exception>(async () =>
+            await drv.InitializeAsync("{}", TestContext.Current.CancellationToken));
+
+        var health = drv.GetHealth();
+        health.State.ShouldBe(DriverState.Faulted);
+        health.LastError.ShouldNotBeNull();
+    }
+
+    [Fact]
+    public async Task Reinitialize_against_unreachable_endpoint_re_throws()
+    {
+        var opts = new OpcUaClientDriverOptions
+        {
+            // Port 1 on loopback is effectively guaranteed to be closed — the OS responds
+            // with TCP RST immediately instead of hanging on connect, which keeps the
+            // unreachable-host tests snappy. Don't use an RFC 5737 reserved IP; those get
+            // routed to a black-hole + time out only after the SDK's internal retry/backoff
+            // fully elapses (~60s even with Options.Timeout=500ms).
+            EndpointUrl = "opc.tcp://127.0.0.1:1",
+            Timeout = TimeSpan.FromMilliseconds(500),
+            AutoAcceptCertificates = true,
+        };
+        using var drv = new OpcUaClientDriver(opts, "opcua-reinit");
+
+        await Should.ThrowAsync<Exception>(async () =>
+            await drv.InitializeAsync("{}", TestContext.Current.CancellationToken));
+        await Should.ThrowAsync<Exception>(async () =>
+            await drv.ReinitializeAsync("{}", TestContext.Current.CancellationToken));
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests/OpcUaClientFailoverTests.cs

@@ -0,0 +1,81 @@
+using Shouldly;
+using Xunit;
+using ZB.MOM.WW.OtOpcUa.Core.Abstractions;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests;
+
+[Trait("Category", "Unit")]
+public sealed class OpcUaClientFailoverTests
+{
+    [Fact]
+    public void ResolveEndpointCandidates_prefers_EndpointUrls_when_provided()
+    {
+        var opts = new OpcUaClientDriverOptions
+        {
+            EndpointUrl = "opc.tcp://fallback:4840",
+            EndpointUrls = ["opc.tcp://primary:4840", "opc.tcp://backup:4841"],
+        };
+        var list = OpcUaClientDriver.ResolveEndpointCandidates(opts);
+        list.Count.ShouldBe(2);
+        list[0].ShouldBe("opc.tcp://primary:4840");
+        list[1].ShouldBe("opc.tcp://backup:4841");
+    }
+
+    [Fact]
+    public void ResolveEndpointCandidates_falls_back_to_single_EndpointUrl_when_list_empty()
+    {
+        var opts = new OpcUaClientDriverOptions { EndpointUrl = "opc.tcp://only:4840" };
+        var list = OpcUaClientDriver.ResolveEndpointCandidates(opts);
+        list.Count.ShouldBe(1);
+        list[0].ShouldBe("opc.tcp://only:4840");
+    }
+
+    [Fact]
+    public void ResolveEndpointCandidates_empty_list_treated_as_fallback_to_EndpointUrl()
+    {
+        // Explicit empty list should still fall back to the single-URL shortcut rather than
+        // producing a zero-candidate sweep that would immediately throw with no URLs tried.
+        var opts = new OpcUaClientDriverOptions
+        {
+            EndpointUrl = "opc.tcp://single:4840",
+            EndpointUrls = [],
+        };
+        OpcUaClientDriver.ResolveEndpointCandidates(opts).Count.ShouldBe(1);
+    }
+
+    [Fact]
+    public void HostName_uses_first_candidate_before_connect()
+    {
+        var opts = new OpcUaClientDriverOptions
+        {
+            EndpointUrls = ["opc.tcp://primary:4840", "opc.tcp://backup:4841"],
+        };
+        using var drv = new OpcUaClientDriver(opts, "opcua-host");
+        drv.HostName.ShouldBe("opc.tcp://primary:4840",
+            "pre-connect the dashboard should show the first candidate URL so operators can link back");
+    }
+
+    [Fact]
+    public async Task Initialize_against_all_unreachable_endpoints_throws_AggregateException_listing_each()
+    {
+        // Port 1 + port 2 + port 3 on loopback are all guaranteed closed (TCP RST immediate).
+        // Failover sweep should attempt all three and throw AggregateException naming each URL
+        // so operators see exactly which candidates were tried.
+        var opts = new OpcUaClientDriverOptions
+        {
+            EndpointUrls = ["opc.tcp://127.0.0.1:1", "opc.tcp://127.0.0.1:2", "opc.tcp://127.0.0.1:3"],
+            PerEndpointConnectTimeout = TimeSpan.FromMilliseconds(500),
+            Timeout = TimeSpan.FromMilliseconds(500),
+            AutoAcceptCertificates = true,
+        };
+        using var drv = new OpcUaClientDriver(opts, "opcua-failover");
+
+        var ex = await Should.ThrowAsync<AggregateException>(async () =>
+            await drv.InitializeAsync("{}", TestContext.Current.CancellationToken));
+
+        ex.Message.ShouldContain("127.0.0.1:1");
+        ex.Message.ShouldContain("127.0.0.1:2");
+        ex.Message.ShouldContain("127.0.0.1:3");
+        drv.GetHealth().State.ShouldBe(DriverState.Faulted);
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests/OpcUaClientReadWriteTests.cs

@@ -0,0 +1,32 @@
+using Shouldly;
+using Xunit;
+using ZB.MOM.WW.OtOpcUa.Core.Abstractions;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests;
+
+/// <summary>
+///     Unit tests for the IReadable/IWritable surface that don't need a live remote OPC UA
+///     server. Wire-level round-trips against a local in-process server fixture land in a
+///     follow-up PR once we have one scaffolded.
+/// </summary>
+[Trait("Category", "Unit")]
+public sealed class OpcUaClientReadWriteTests
+{
+    [Fact]
+    public async Task ReadAsync_without_initialize_throws_InvalidOperationException()
+    {
+        using var drv = new OpcUaClientDriver(new OpcUaClientDriverOptions(), "opcua-uninit");
+        await Should.ThrowAsync<InvalidOperationException>(async () =>
+            await drv.ReadAsync(["ns=2;s=Demo"], TestContext.Current.CancellationToken));
+    }
+
+    [Fact]
+    public async Task WriteAsync_without_initialize_throws_InvalidOperationException()
+    {
+        using var drv = new OpcUaClientDriver(new OpcUaClientDriverOptions(), "opcua-uninit");
+        await Should.ThrowAsync<InvalidOperationException>(async () =>
+            await drv.WriteAsync(
+                [new WriteRequest("ns=2;s=Demo", 42)],
+                TestContext.Current.CancellationToken));
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests/OpcUaClientReconnectTests.cs

@@ -0,0 +1,36 @@
+using Shouldly;
+using Xunit;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests;
+
+/// <summary>
+///     Scaffold tests for <see cref="SessionReconnectHandler"/> wiring. Wire-level
+///     disconnect-reconnect-resume coverage against a live upstream server lands with the
+///     in-process fixture — too much machinery for a unit-test-only lane.
+/// </summary>
+[Trait("Category", "Unit")]
+public sealed class OpcUaClientReconnectTests
+{
+    [Fact]
+    public void Default_ReconnectPeriod_matches_driver_specs_5_seconds()
+    {
+        new OpcUaClientDriverOptions().ReconnectPeriod.ShouldBe(TimeSpan.FromSeconds(5));
+    }
+
+    [Fact]
+    public void Options_ReconnectPeriod_is_configurable_for_aggressive_or_relaxed_retry()
+    {
+        var opts = new OpcUaClientDriverOptions { ReconnectPeriod = TimeSpan.FromMilliseconds(500) };
+        opts.ReconnectPeriod.ShouldBe(TimeSpan.FromMilliseconds(500));
+    }
+
+    [Fact]
+    public void Driver_starts_with_no_reconnect_handler_active_pre_init()
+    {
+        // The reconnect handler is lazy — spun up only when a bad keep-alive fires. Pre-init
+        // there's no session to reconnect, so the field must be null (indirectly verified by
+        // the lifecycle-shape test suite catching any accidental construction).
+        using var drv = new OpcUaClientDriver(new OpcUaClientDriverOptions(), "opcua-reconnect");
+        drv.GetHealth().State.ShouldBe(Core.Abstractions.DriverState.Unknown);
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests/OpcUaClientSecurityPolicyTests.cs

@@ -0,0 +1,54 @@
+using Opc.Ua;
+using Shouldly;
+using Xunit;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests;
+
+[Trait("Category", "Unit")]
+public sealed class OpcUaClientSecurityPolicyTests
+{
+    [Theory]
+    [InlineData(OpcUaSecurityPolicy.None)]
+    [InlineData(OpcUaSecurityPolicy.Basic128Rsa15)]
+    [InlineData(OpcUaSecurityPolicy.Basic256)]
+    [InlineData(OpcUaSecurityPolicy.Basic256Sha256)]
+    [InlineData(OpcUaSecurityPolicy.Aes128_Sha256_RsaOaep)]
+    [InlineData(OpcUaSecurityPolicy.Aes256_Sha256_RsaPss)]
+    public void MapSecurityPolicy_returns_known_non_empty_uri_for_every_enum_value(OpcUaSecurityPolicy policy)
+    {
+        var uri = OpcUaClientDriver.MapSecurityPolicy(policy);
+        uri.ShouldNotBeNullOrEmpty();
+        // Each URI should end in the enum name (for the non-None policies) so a driver
+        // operator reading logs can correlate the URI back to the config value.
+        if (policy != OpcUaSecurityPolicy.None)
+            uri.ShouldContain(policy.ToString());
+    }
+
+    [Fact]
+    public void MapSecurityPolicy_None_matches_SDK_None_URI()
+    {
+        OpcUaClientDriver.MapSecurityPolicy(OpcUaSecurityPolicy.None)
+            .ShouldBe(SecurityPolicies.None);
+    }
+
+    [Fact]
+    public void MapSecurityPolicy_Basic256Sha256_matches_SDK_URI()
+    {
+        OpcUaClientDriver.MapSecurityPolicy(OpcUaSecurityPolicy.Basic256Sha256)
+            .ShouldBe(SecurityPolicies.Basic256Sha256);
+    }
+
+    [Fact]
+    public void MapSecurityPolicy_Aes256_Sha256_RsaPss_matches_SDK_URI()
+    {
+        OpcUaClientDriver.MapSecurityPolicy(OpcUaSecurityPolicy.Aes256_Sha256_RsaPss)
+            .ShouldBe(SecurityPolicies.Aes256_Sha256_RsaPss);
+    }
+
+    [Fact]
+    public void Every_enum_value_has_a_mapping()
+    {
+        foreach (OpcUaSecurityPolicy p in Enum.GetValues<OpcUaSecurityPolicy>())
+            Should.NotThrow(() => OpcUaClientDriver.MapSecurityPolicy(p));
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests/OpcUaClientSubscribeAndProbeTests.cs

@@ -0,0 +1,50 @@
+using Shouldly;
+using Xunit;
+using ZB.MOM.WW.OtOpcUa.Core.Abstractions;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests;
+
+/// <summary>
+///     Scaffold tests for <c>ISubscribable</c> + <c>IHostConnectivityProbe</c> that don't
+///     need a live remote server. Live-session tests (subscribe/unsubscribe round-trip,
+///     keep-alive transitions) land in a follow-up PR once the in-process OPC UA server
+///     fixture is scaffolded.
+/// </summary>
+[Trait("Category", "Unit")]
+public sealed class OpcUaClientSubscribeAndProbeTests
+{
+    [Fact]
+    public async Task SubscribeAsync_without_initialize_throws_InvalidOperationException()
+    {
+        using var drv = new OpcUaClientDriver(new OpcUaClientDriverOptions(), "opcua-sub-uninit");
+        await Should.ThrowAsync<InvalidOperationException>(async () =>
+            await drv.SubscribeAsync(["ns=2;s=Demo"], TimeSpan.FromMilliseconds(100), TestContext.Current.CancellationToken));
+    }
+
+    [Fact]
+    public async Task UnsubscribeAsync_with_unknown_handle_is_noop()
+    {
+        using var drv = new OpcUaClientDriver(new OpcUaClientDriverOptions(), "opcua-sub-unknown");
+        // UnsubscribeAsync returns cleanly for handles it doesn't recognise — protects against
+        // the caller's race with server-side cleanup after a session drop.
+        await drv.UnsubscribeAsync(new FakeHandle(), TestContext.Current.CancellationToken);
+    }
+
+    [Fact]
+    public void GetHostStatuses_returns_endpoint_url_row_pre_init()
+    {
+        using var drv = new OpcUaClientDriver(
+            new OpcUaClientDriverOptions { EndpointUrl = "opc.tcp://plc.example:4840" },
+            "opcua-hosts");
+        var rows = drv.GetHostStatuses();
+        rows.Count.ShouldBe(1);
+        rows[0].HostName.ShouldBe("opc.tcp://plc.example:4840",
+            "host identity mirrors the endpoint URL so the Admin /hosts dashboard can link back to the remote server");
+        rows[0].State.ShouldBe(HostState.Unknown);
+    }
+
+    private sealed class FakeHandle : ISubscriptionHandle
+    {
+        public string DiagnosticId => "fake";
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests/ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests.csproj

@@ -0,0 +1,31 @@
+<Project Sdk="Microsoft.NET.Sdk">
+
+    <PropertyGroup>
+        <TargetFramework>net10.0</TargetFramework>
+        <Nullable>enable</Nullable>
+        <ImplicitUsings>enable</ImplicitUsings>
+        <IsPackable>false</IsPackable>
+        <IsTestProject>true</IsTestProject>
+        <RootNamespace>ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests</RootNamespace>
+    </PropertyGroup>
+
+    <ItemGroup>
+        <PackageReference Include="xunit.v3" Version="1.1.0"/>
+        <PackageReference Include="Shouldly" Version="4.3.0"/>
+        <PackageReference Include="Microsoft.NET.Test.Sdk" Version="17.12.0"/>
+        <PackageReference Include="xunit.runner.visualstudio" Version="3.0.2">
+            <PrivateAssets>all</PrivateAssets>
+            <IncludeAssets>runtime; build; native; contentfiles; analyzers; buildtransitive</IncludeAssets>
+        </PackageReference>
+    </ItemGroup>
+
+    <ItemGroup>
+        <ProjectReference Include="..\..\src\ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient\ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.csproj"/>
+    </ItemGroup>
+
+    <ItemGroup>
+        <NuGetAuditSuppress Include="https://github.com/advisories/GHSA-37gx-xxp4-5rgx"/>
+        <NuGetAuditSuppress Include="https://github.com/advisories/GHSA-w3x6-4m5h-cxqf"/>
+    </ItemGroup>
+
+</Project>

tests/ZB.MOM.WW.OtOpcUa.Driver.S7.Tests/S7AddressParserTests.cs

@@ -0,0 +1,119 @@
+using Shouldly;
+using Xunit;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.S7.Tests;
+
+[Trait("Category", "Unit")]
+public sealed class S7AddressParserTests
+{
+    // --- Data blocks ---
+
+    [Theory]
+    [InlineData("DB1.DBX0.0", 1, S7Size.Bit, 0, 0)]
+    [InlineData("DB1.DBX0.7", 1, S7Size.Bit, 0, 7)]
+    [InlineData("DB1.DBB0", 1, S7Size.Byte, 0, 0)]
+    [InlineData("DB1.DBW0", 1, S7Size.Word, 0, 0)]
+    [InlineData("DB1.DBD4", 1, S7Size.DWord, 4, 0)]
+    [InlineData("DB10.DBW100", 10, S7Size.Word, 100, 0)]
+    [InlineData("DB1.DBX15.3", 1, S7Size.Bit, 15, 3)]
+    public void Parse_data_block_addresses(string input, int db, S7Size size, int byteOff, int bitOff)
+    {
+        var r = S7AddressParser.Parse(input);
+        r.Area.ShouldBe(S7Area.DataBlock);
+        r.DbNumber.ShouldBe(db);
+        r.Size.ShouldBe(size);
+        r.ByteOffset.ShouldBe(byteOff);
+        r.BitOffset.ShouldBe(bitOff);
+    }
+
+    [Theory]
+    [InlineData("db1.dbw0", 1, S7Size.Word, 0)]
+    [InlineData(" DB1.DBW0 ", 1, S7Size.Word, 0)]       // trim whitespace
+    public void Parse_is_case_insensitive_and_trims(string input, int db, S7Size size, int off)
+    {
+        var r = S7AddressParser.Parse(input);
+        r.Area.ShouldBe(S7Area.DataBlock);
+        r.DbNumber.ShouldBe(db);
+        r.Size.ShouldBe(size);
+        r.ByteOffset.ShouldBe(off);
+    }
+
+    // --- M / I / Q ---
+
+    [Theory]
+    [InlineData("MB0", S7Area.Memory, S7Size.Byte, 0, 0)]
+    [InlineData("MW10", S7Area.Memory, S7Size.Word, 10, 0)]
+    [InlineData("MD4", S7Area.Memory, S7Size.DWord, 4, 0)]
+    [InlineData("M0.0", S7Area.Memory, S7Size.Bit, 0, 0)]
+    [InlineData("M255.7", S7Area.Memory, S7Size.Bit, 255, 7)]
+    [InlineData("IB0", S7Area.Input, S7Size.Byte, 0, 0)]
+    [InlineData("IW0", S7Area.Input, S7Size.Word, 0, 0)]
+    [InlineData("I0.0", S7Area.Input, S7Size.Bit, 0, 0)]
+    [InlineData("QB0", S7Area.Output, S7Size.Byte, 0, 0)]
+    [InlineData("QW0", S7Area.Output, S7Size.Word, 0, 0)]
+    [InlineData("Q0.0", S7Area.Output, S7Size.Bit, 0, 0)]
+    [InlineData("QD4", S7Area.Output, S7Size.DWord, 4, 0)]
+    public void Parse_MIQ_addresses(string input, S7Area area, S7Size size, int byteOff, int bitOff)
+    {
+        var r = S7AddressParser.Parse(input);
+        r.Area.ShouldBe(area);
+        r.DbNumber.ShouldBe(0);
+        r.Size.ShouldBe(size);
+        r.ByteOffset.ShouldBe(byteOff);
+        r.BitOffset.ShouldBe(bitOff);
+    }
+
+    // --- Timers / counters ---
+
+    [Theory]
+    [InlineData("T0", S7Area.Timer, 0)]
+    [InlineData("T15", S7Area.Timer, 15)]
+    [InlineData("C0", S7Area.Counter, 0)]
+    [InlineData("C10", S7Area.Counter, 10)]
+    public void Parse_timer_and_counter(string input, S7Area area, int number)
+    {
+        var r = S7AddressParser.Parse(input);
+        r.Area.ShouldBe(area);
+        r.ByteOffset.ShouldBe(number);
+        r.Size.ShouldBe(S7Size.Word, "timers + counters are 16-bit opaque");
+    }
+
+    // --- Reject garbage ---
+
+    [Theory]
+    [InlineData("")]
+    [InlineData("   ")]
+    [InlineData("Z0")]                 // unknown area
+    [InlineData("DB")]                 // no number or tail
+    [InlineData("DB1")]                // no tail
+    [InlineData("DB1.")]               // empty tail
+    [InlineData("DB1.DBX0")]           // bit size without .bit
+    [InlineData("DB1.DBX0.8")]         // bit 8 out of range
+    [InlineData("DB1.DBW0.0")]         // word with bit suffix
+    [InlineData("DB0.DBW0")]           // db 0 invalid
+    [InlineData("DBA.DBW0")]           // non-numeric db
+    [InlineData("DB1.DBQ0")]           // invalid size letter
+    [InlineData("M")]                  // no offset
+    [InlineData("M0")]                 // bit access needs .bit
+    [InlineData("M0.8")]               // bit 8
+    [InlineData("MB-1")]               // negative offset
+    [InlineData("MW")]                 // no offset digits
+    [InlineData("TA")]                 // non-numeric timer
+    public void Parse_rejects_invalid(string bad)
+        => Should.Throw<FormatException>(() => S7AddressParser.Parse(bad));
+
+    [Fact]
+    public void TryParse_returns_false_for_garbage_without_throwing()
+    {
+        S7AddressParser.TryParse("not-an-address", out var r).ShouldBeFalse();
+        r.ShouldBe(default);
+    }
+
+    [Fact]
+    public void TryParse_returns_true_for_valid_address()
+    {
+        S7AddressParser.TryParse("DB1.DBW0", out var r).ShouldBeTrue();
+        r.DbNumber.ShouldBe(1);
+        r.Size.ShouldBe(S7Size.Word);
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.S7.Tests/S7DiscoveryAndSubscribeTests.cs

@@ -0,0 +1,117 @@
+using Shouldly;
+using Xunit;
+using ZB.MOM.WW.OtOpcUa.Core.Abstractions;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.S7.Tests;
+
+/// <summary>
+///     Shape tests for <see cref="S7Driver"/>'s <see cref="ITagDiscovery"/>,
+///     <see cref="ISubscribable"/>, and <see cref="IHostConnectivityProbe"/> surfaces that
+///     don't need a live PLC. Wire-level polling round-trips and probe transitions land in a
+///     follow-up PR once we have a mock S7 server.
+/// </summary>
+[Trait("Category", "Unit")]
+public sealed class S7DiscoveryAndSubscribeTests
+{
+    private sealed class RecordingAddressSpaceBuilder : IAddressSpaceBuilder
+    {
+        public readonly List<string> Folders = new();
+        public readonly List<(string Name, DriverAttributeInfo Attr)> Variables = new();
+
+        public IAddressSpaceBuilder Folder(string browseName, string displayName)
+        {
+            Folders.Add(browseName);
+            return this;
+        }
+        public IVariableHandle Variable(string browseName, string displayName, DriverAttributeInfo attributeInfo)
+        {
+            Variables.Add((browseName, attributeInfo));
+            return new StubHandle();
+        }
+        public void AddProperty(string browseName, DriverDataType dataType, object? value) { }
+        public void AttachAlarmCondition(IVariableHandle sourceVariable, string alarmName, DriverAttributeInfo alarmInfo) { }
+
+        private sealed class StubHandle : IVariableHandle
+        {
+            public string FullReference => "stub";
+            public IAlarmConditionSink MarkAsAlarmCondition(AlarmConditionInfo info)
+                => throw new NotImplementedException("S7 driver never calls this — no alarm surfacing");
+        }
+    }
+
+    [Fact]
+    public async Task DiscoverAsync_projects_every_tag_into_the_address_space()
+    {
+        var opts = new S7DriverOptions
+        {
+            Host = "192.0.2.1",
+            Tags =
+            [
+                new("TempSetpoint", "DB1.DBW0", S7DataType.Int16, Writable: true),
+                new("FaultBit", "M0.0", S7DataType.Bool, Writable: false),
+                new("PIDOutput", "DB5.DBD12", S7DataType.Float32, Writable: true),
+            ],
+        };
+        using var drv = new S7Driver(opts, "s7-disco");
+
+        var builder = new RecordingAddressSpaceBuilder();
+        await drv.DiscoverAsync(builder, TestContext.Current.CancellationToken);
+
+        builder.Folders.ShouldContain("S7");
+        builder.Variables.Count.ShouldBe(3);
+        builder.Variables[0].Name.ShouldBe("TempSetpoint");
+        builder.Variables[0].Attr.SecurityClass.ShouldBe(SecurityClassification.Operate, "writable tags get Operate security class");
+        builder.Variables[1].Attr.SecurityClass.ShouldBe(SecurityClassification.ViewOnly, "read-only tags get ViewOnly");
+        builder.Variables[2].Attr.DriverDataType.ShouldBe(DriverDataType.Float32);
+    }
+
+    [Fact]
+    public void GetHostStatuses_returns_one_row_with_host_port_identity_pre_init()
+    {
+        var opts = new S7DriverOptions { Host = "plc1.internal", Port = 102 };
+        using var drv = new S7Driver(opts, "s7-host");
+
+        var rows = drv.GetHostStatuses();
+        rows.Count.ShouldBe(1);
+        rows[0].HostName.ShouldBe("plc1.internal:102");
+        rows[0].State.ShouldBe(HostState.Unknown, "pre-init / pre-probe state is Unknown");
+    }
+
+    [Fact]
+    public async Task SubscribeAsync_returns_unique_handles_and_UnsubscribeAsync_accepts_them()
+    {
+        var opts = new S7DriverOptions { Host = "192.0.2.1" };
+        using var drv = new S7Driver(opts, "s7-sub");
+
+        // SubscribeAsync does not itself call ReadAsync (the poll task does), so this works
+        // even though the driver isn't initialized. The poll task catches the resulting
+        // InvalidOperationException and the loop quietly continues — same pattern as the
+        // Modbus driver's poll loop tolerating transient transport failures.
+        var h1 = await drv.SubscribeAsync(["T1"], TimeSpan.FromMilliseconds(200), TestContext.Current.CancellationToken);
+        var h2 = await drv.SubscribeAsync(["T2"], TimeSpan.FromMilliseconds(200), TestContext.Current.CancellationToken);
+
+        h1.DiagnosticId.ShouldStartWith("s7-sub-");
+        h2.DiagnosticId.ShouldStartWith("s7-sub-");
+        h1.DiagnosticId.ShouldNotBe(h2.DiagnosticId);
+
+        await drv.UnsubscribeAsync(h1, TestContext.Current.CancellationToken);
+        await drv.UnsubscribeAsync(h2, TestContext.Current.CancellationToken);
+        // UnsubscribeAsync with an unknown handle must be a no-op, not throw.
+        await drv.UnsubscribeAsync(h1, TestContext.Current.CancellationToken);
+    }
+
+    [Fact]
+    public async Task Subscribe_publishing_interval_is_floored_at_100ms()
+    {
+        var opts = new S7DriverOptions { Host = "192.0.2.1", Probe = new S7ProbeOptions { Enabled = false } };
+        using var drv = new S7Driver(opts, "s7-floor");
+
+        // 50 ms requested — the floor protects the S7 CPU from sub-scan polling that would
+        // just queue wire-side. Test that the subscription is accepted (the floor is applied
+        // internally; the floor value isn't exposed, so we're really just asserting that the
+        // driver doesn't reject small intervals).
+        var h = await drv.SubscribeAsync(["T"], TimeSpan.FromMilliseconds(50), TestContext.Current.CancellationToken);
+        h.ShouldNotBeNull();
+        await drv.UnsubscribeAsync(h, TestContext.Current.CancellationToken);
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.S7.Tests/S7DriverReadWriteTests.cs

@@ -0,0 +1,54 @@
+using Shouldly;
+using Xunit;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.S7.Tests;
+
+/// <summary>
+///     Unit tests for <see cref="S7Driver"/>'s <c>IReadable</c>/<c>IWritable</c> surface
+///     that don't require a live PLC — covers error paths (not-initialized, unknown tag,
+///     read-only write rejection, unsupported data types). Wire-level round-trip tests
+///     against a live S7 or a mock-server land in a follow-up PR since S7.Net doesn't ship
+///     an in-process fake and an adequate mock is non-trivial.
+/// </summary>
+[Trait("Category", "Unit")]
+public sealed class S7DriverReadWriteTests
+{
+    [Fact]
+    public async Task Initialize_rejects_invalid_tag_address_and_fails_fast()
+    {
+        // Bad address at init time must throw; the alternative (deferring the parse to the
+        // first read) would surface the config bug as BadInternalError on every subsequent
+        // Read which is impossible for an operator to diagnose from the OPC UA client.
+        var opts = new S7DriverOptions
+        {
+            Host = "192.0.2.1", // reserved — will never complete TCP handshake
+            Timeout = TimeSpan.FromMilliseconds(250),
+            Tags = [new S7TagDefinition("BadTag", "NOT-AN-S7-ADDRESS", S7DataType.Int16)],
+        };
+        using var drv = new S7Driver(opts, "s7-bad-tag");
+
+        // Either the TCP connect fails first (Exception) or the parser fails (FormatException)
+        // — both are acceptable since both are init-time fail-fast. What matters is that we
+        // don't return a "healthy" driver with a latent bad tag.
+        await Should.ThrowAsync<Exception>(async () =>
+            await drv.InitializeAsync("{}", TestContext.Current.CancellationToken));
+    }
+
+    [Fact]
+    public async Task ReadAsync_without_initialize_throws_InvalidOperationException()
+    {
+        using var drv = new S7Driver(new S7DriverOptions { Host = "192.0.2.1" }, "s7-uninit");
+        await Should.ThrowAsync<InvalidOperationException>(async () =>
+            await drv.ReadAsync(["Any"], TestContext.Current.CancellationToken));
+    }
+
+    [Fact]
+    public async Task WriteAsync_without_initialize_throws_InvalidOperationException()
+    {
+        using var drv = new S7Driver(new S7DriverOptions { Host = "192.0.2.1" }, "s7-uninit");
+        await Should.ThrowAsync<InvalidOperationException>(async () =>
+            await drv.WriteAsync(
+                [new(FullReference: "Any", Value: (short)0)],
+                TestContext.Current.CancellationToken));
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.S7.Tests/S7DriverScaffoldTests.cs

@@ -0,0 +1,66 @@
+using Shouldly;
+using Xunit;
+using ZB.MOM.WW.OtOpcUa.Core.Abstractions;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.S7.Tests;
+
+/// <summary>
+///     Scaffold-level tests that don't need a live S7 PLC — exercise driver lifecycle shape,
+///     default option values, and failure-mode transitions. PR 64 adds IReadable/IWritable
+///     tests against a mock-server, PR 65 adds discovery + subscribe.
+/// </summary>
+[Trait("Category", "Unit")]
+public sealed class S7DriverScaffoldTests
+{
+    [Fact]
+    public void Default_options_target_S7_1500_slot_0_on_port_102()
+    {
+        var opts = new S7DriverOptions();
+        opts.Port.ShouldBe(102, "ISO-on-TCP is always 102 for S7; documented in driver-specs.md §5");
+        opts.CpuType.ShouldBe(global::S7.Net.CpuType.S71500);
+        opts.Rack.ShouldBe((short)0);
+        opts.Slot.ShouldBe((short)0, "S7-1200/1500 onboard PN ports are slot 0 by convention");
+    }
+
+    [Fact]
+    public void Default_probe_interval_is_reasonable_for_S7_scan_cycle()
+    {
+        // S7 PLCs scan 2-10 ms but comms mailbox typically processed once per scan.
+        // 5 s default probe is lightweight — ~0.001% of comms budget.
+        new S7ProbeOptions().Interval.ShouldBe(TimeSpan.FromSeconds(5));
+    }
+
+    [Fact]
+    public void Tag_definition_defaults_to_writable_with_S7_max_string_length()
+    {
+        var tag = new S7TagDefinition("T", "DB1.DBW0", S7DataType.Int16);
+        tag.Writable.ShouldBeTrue();
+        tag.StringLength.ShouldBe(254, "S7 STRING type max length is 254 chars");
+    }
+
+    [Fact]
+    public void Driver_instance_reports_type_and_id_before_connect()
+    {
+        var opts = new S7DriverOptions { Host = "127.0.0.1" };
+        using var drv = new S7Driver(opts, "s7-test");
+        drv.DriverType.ShouldBe("S7");
+        drv.DriverInstanceId.ShouldBe("s7-test");
+        drv.GetHealth().State.ShouldBe(DriverState.Unknown, "health starts Unknown until InitializeAsync runs");
+    }
+
+    [Fact]
+    public async Task Initialize_against_unreachable_host_transitions_to_Faulted_and_throws()
+    {
+        // Pick an RFC 5737 reserved-for-documentation IP so the connect attempt fails fast
+        // (no DNS mismatch, no accidental traffic to a real PLC).
+        var opts = new S7DriverOptions { Host = "192.0.2.1", Timeout = TimeSpan.FromMilliseconds(250) };
+        using var drv = new S7Driver(opts, "s7-unreach");
+
+        await Should.ThrowAsync<Exception>(async () =>
+            await drv.InitializeAsync("{}", TestContext.Current.CancellationToken));
+
+        var health = drv.GetHealth();
+        health.State.ShouldBe(DriverState.Faulted, "unreachable host must flip the driver to Faulted so operators see it");
+        health.LastError.ShouldNotBeNull();
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.S7.Tests/ZB.MOM.WW.OtOpcUa.Driver.S7.Tests.csproj

@@ -0,0 +1,31 @@
+<Project Sdk="Microsoft.NET.Sdk">
+
+    <PropertyGroup>
+        <TargetFramework>net10.0</TargetFramework>
+        <Nullable>enable</Nullable>
+        <ImplicitUsings>enable</ImplicitUsings>
+        <IsPackable>false</IsPackable>
+        <IsTestProject>true</IsTestProject>
+        <RootNamespace>ZB.MOM.WW.OtOpcUa.Driver.S7.Tests</RootNamespace>
+    </PropertyGroup>
+
+    <ItemGroup>
+        <PackageReference Include="xunit.v3" Version="1.1.0"/>
+        <PackageReference Include="Shouldly" Version="4.3.0"/>
+        <PackageReference Include="Microsoft.NET.Test.Sdk" Version="17.12.0"/>
+        <PackageReference Include="xunit.runner.visualstudio" Version="3.0.2">
+            <PrivateAssets>all</PrivateAssets>
+            <IncludeAssets>runtime; build; native; contentfiles; analyzers; buildtransitive</IncludeAssets>
+        </PackageReference>
+    </ItemGroup>
+
+    <ItemGroup>
+        <ProjectReference Include="..\..\src\ZB.MOM.WW.OtOpcUa.Driver.S7\ZB.MOM.WW.OtOpcUa.Driver.S7.csproj"/>
+    </ItemGroup>
+
+    <ItemGroup>
+        <NuGetAuditSuppress Include="https://github.com/advisories/GHSA-37gx-xxp4-5rgx"/>
+        <NuGetAuditSuppress Include="https://github.com/advisories/GHSA-w3x6-4m5h-cxqf"/>
+    </ItemGroup>
+
+</Project>