Adds FocasAlarmProjection with two modes (ActiveOnly default, ActivePlusHistory)
that polls cnc_rdalmhistry on connect + on a configurable cadence (5 min default,
HistoryDepth=100 capped at 250). Emits historic events via IAlarmSource with
SourceTimestampUtc set from the CNC's reported timestamp; dedup keyed on
(OccurrenceTime, AlarmNumber, AlarmType). Ships the ODBALMHIS packed-buffer
decoder + encoder in Wire/FocasAlarmHistoryDecoder.cs and threads
ReadAlarmHistoryAsync through IFocasClient (default no-op so existing transport
variants stay back-compat). FocasDriver now implements IAlarmSource.
13 new unit tests cover: mode switch, dedup, distinct-timestamp emission,
type-as-key behaviour, OccurrenceTime passthrough (not Now), HistoryDepth
clamp/fallback, and decoder round-trip. All 341 FOCAS unit tests still pass.
Docs: docs/drivers/FOCAS.md (new), docs/v2/focas-deployment.md (new),
docs/v2/implementation/focas-wire-protocol.md (new),
docs/v2/implementation/focas-simulator-plan.md (new),
docs/drivers/FOCAS-Test-Fixture.md (alarm-history bullet appended).
Closes#267
Adds optional `@N` path suffix to FocasAddress (PARAM:1815@2, R100@3.0,
MACRO:500@2, DIAG:280@2/1) with PathId defaulting to 1 for back-compat.
Per-device PathCount is discovered via cnc_rdpathnum at first connect and
cached on DeviceState; reads with PathId>PathCount return BadOutOfRange.
The driver issues cnc_setpath before each non-default-path read and
tracks LastSetPath so repeat reads on the same path skip the wire call.
Closes#264
New FocasAreaKind.Diagnostic parsed from DIAG:nnn (whole-CNC) and
DIAG:nnn/axis (per-axis), validated against a per-series
FocasCapabilityMatrix.DiagnosticRange table (16i: 0-499; 0i-F family:
0-999; 30i/31i/32i: 0-1023; Power Motion i: 0-255; Unknown: permissive
per existing matrix convention).
IFocasClient gains ReadDiagnosticAsync(diagNumber, axisOrZero, type,
ct) with a default returning BadNotSupported so older transport
variants degrade gracefully. FwlibFocasClient implements it via a new
cnc_rddiag P/Invoke that reuses the IODBPSD struct (same shape as
cnc_rdparam). FocasDriver.ReadAsync dispatches Diagnostic addresses
through the new path; non-Diagnostic kinds keep the existing
ReadAsync route unchanged.
Tests: parser positives (DIAG:1031, DIAG:280/2, case-insensitive,
zero, axis-8) + negatives (malformed, axis>31), capability matrix
boundaries per series, driver-level dispatch verifying axis index
threads through, init-time rejection on out-of-range, and
BadNotSupported fallback when the wire client doesn't override the
default. 266/266 pass in Driver.FOCAS.Tests.
Closes#263
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Closes#259
Adds Modal/ + Override/ fixed-tree subfolders per FOCAS device, mirroring the
pattern established by Status/ (#257) and Production/ (#258): cached snapshots
refreshed on the probe tick, served from cache on read, no extra wire traffic
on top of user-driven tag reads.
Modal/ surfaces the four universally-present aux modal codes M/S/T/B from
cnc_modal(type=100..103) as Int16. **G-group decoding (groups 1..21) is deferred
to a follow-up** — the FWLIB ODBMDL union differs per series + group and the
issue body explicitly permits this scoping. Adds the cnc_modal P/Invoke +
ODBMDL struct + a generic int16 cnc_rdparam helper so the follow-up can add
G-groups without further wire-level scaffolding.
Override/ surfaces Feed/Rapid/Spindle/Jog from cnc_rdparam at MTB-specific
parameter numbers (FocasDeviceOptions.OverrideParameters; defaults to 30i:
6010/6011/6014/6015). Per-field nullable params let a deployment hide overrides
their MTB doesn't wire up; passing OverrideParameters=null suppresses the entire
Override/ subfolder for that device.
6 unit tests cover discovery shape, omitted Override folder when unconfigured,
partial Override field selection, cached-snapshot reads (Modal + Override),
BadCommunicationError before first refresh, and the FwlibFocasClient
disconnected short-circuit.
