- #682: ServedAggregates (ten raw-evaluated per-sample + TimeAverage/Total) replaces the placeholder
AggregateModeMapper.Served; NativeAggregates is derived from the mapper's switch. The Gateway
expectations in AggregateModeMapperTests, HistorianBackendRegistryTests and
AdvertisedAggregateFunctionsWireTests move to the 12-member set (the wire tests' 'not served by
Gateway' example is now TimeAverage2).
- #684: RawBucketAccumulator applies the SQL backends' Good-only value columns (Avg/Min/Max/Sum and
the ActualTime extreme over Good numeric samples), UncertainMin/UncertainMax over Uncertain numeric
samples, and GoodNonNumeric. The parity oracle carries the #684 InMemoryRows and the DenseUncertain /
UncertainBeyond / UncertainText datasets.
Average, Count, Minimum, Maximum, Range, Start, End, Delta and Minimum/MaximumActualTime are evaluated
on the Gateway backend from forward ReadRaw reads with BucketPlan + AggregateEvaluator, so Gateway
matches SqlServer/QuestDB exactly (values, status bits, interval-start stamps, #677 reverse).
- Window read [start - 1 ms, end] so AVEVA's initial-value row never lands in a bucket; a pre-window
row proves earlier data only with a non-Bad OPC quality (histsdk puts a value on every NULL row).
- Earlier data otherwise from a 2-row [1970, start) probe; later data from a 2-row [end, now+1d]
look-ahead; both ignore rows stamped at their query start/end.
- No gateway stream is ever abandoned (a client-side cancel makes the gateway evict its shared
historian session); past ServerHistorian:MaxTimeWeightedRawRows the bounded stream is drained, then
BadTooManyOperations. The gateway's max_values-ceiling InvalidArgument maps to the same limit; a
caller cancellation is not a backend fault.
- TimeAverage/Total stay AVEVA-native (no prior-sample read for exact Part 13 bounds), now stamped with
the interval start (PENDING the live leg: histsdk's tail+43 start_time field is unverified) and
carrying the Calculated bits.
- Served set: GatewayHistorianDataSource.ServedAggregates (12). Live AVEVA leg open (VPN).
ServerCapabilities/AggregateFunctions (i=2997) is Part 5's list of every
aggregate the server supports, and live AggregateFilter subscriptions still
compute all 37 SDK aggregates, so it keeps the SDK's full set; only i=11201
follows the backend. A null SupportedAggregates is treated as the interface
default (all) by both the advertisement and HistoryRead-Processed (it used to
NRE inside the batch). Docs: i=2997/i=11201 split and the boot window.
Co-Authored-By: Claude <noreply@anthropic.com>
IHistorianDataSource.SupportedAggregates (default: every HistoryAggregateType)
is the one authority for both ServerCapabilities/AggregateFunctions (i=2997) and
HistoryServerCapabilities/AggregateFunctions (i=11201) and for the up-front
BadAggregateNotSupported in HistoryRead-Processed. Gateway declares
AggregateModeMapper.Served (4), SqlServer/QuestDB AggregateFamilies.Served (17),
Null none. Only the folder references are trimmed; the SDK's calculator
factories stay so live AggregateFilter subscriptions keep working.
Co-Authored-By: Claude <noreply@anthropic.com>
Live gate A1 (docker-dev, opc-plc restart / SIGINT / kill): the fast path never fired —
a real process stop delivers no session status; the keep-alives report
BadSecureChannelClosed (0x80860000) once, then BadConnectionClosed (0x80AE0000)
interleaved with BadNoCommunication for the whole outage.
Reproduced in-process with TcpStallProxy.HardClose (reset every connection, refuse new
ones; server and session alive behind it): the identical sequence, and the SDK 1.5.378
session never opens a new connection on its own (48 s with the proxy accepting again,
zero attempts) — a closed channel cannot recover in place.
The driver now treats BadSecureChannelClosed/BadConnectionClosed as definitive on the
SECOND closed-channel keep-alive failure in one outage (a good keep-alive resets the
count), raising ConnectionLost ~1 keep-alive after the drop. BadNoCommunication /
BadRequestTimeout / BadNotConnected (stall/pause) stay with the watchdog; the stall test
still sees no ConnectionLost. New wire test (hard close + reopen ⇒ raised once, SDK never
reconnects, reinit brings the identical value back Good) and unit tests (sustained raises
once; a single blip that recovers does not) — all red on the previous code. Docs updated.
- IHistorianDataSource.SupportsReverseEvents (default false; SqlServer/QuestDB true; Gateway/Null declare false).
The node manager checks it BEFORE calling the source: an end-only capped events read becomes reverse only on
a supporting backend (Gateway, the default, keeps the pre-#675 forward [MinValue, EndTime) paging), and an
explicit reverse read on a non-supporting backend is BadHistoryOperationUnsupported without a call.
- Removed the broad catch (NotSupportedException) in the events path: a NotSupportedException from inside a
backend is now logged as a backend fault (Error), not an 'unsupported' Warning.
- Null declares the reverse overload itself; guard test: every production IHistorianDataSource declares both
the reverse overload and the capability (positive-control scan of all four backends).
- Conformance: capability reported + oversized reverse tie cluster (forward over-fetch reversed == reverse
read order; capped reverse read stopping inside the cluster flags truncation) on SqlServer + QuestDB.
- docs/Historian.md: end-only capped events read is backward on SqlServer/QuestDB, forward on Gateway.
1. RewriteEndpointUrl keeps the advertised port when the configured URL names none
(Uri.Port -1 would have sent the session to 4840); port-less + IPv6 tests.
2. The trailing re-read repairs any (value, status) difference that is not older than
the last delivered value — Good->Bad/Uncertain included; a read without a source
timestamp counts as newer; an equal source time with different content is published
(repairs the replay guard's by-design equal-timestamp drop).
3. One driver-wide delivery lock makes decide+publish atomic across live notifications,
the recovery read and the trailing read, so an older value can never land after a
newer one (deterministic race test via a seam).
4. Known gap documented: a ConnectionLost raised while the host is not Connected is
swallowed and that session falls back to the watchdog.
5. Only a SERVER-reported subscription loss raises ConnectionLost; the publishing-stall
heuristic stays with the #527 watchdog.
6. Post-recovery timers run on Task.Delay(…, Clock, ct) with a session-work CTS
cancelled on session release and dispose.
7. Replay summary at Information only when something was dropped (Debug otherwise);
a re-arm reports the superseded window's drops and counts afresh.
8. DriverInstanceActor: AttachHostStatusSource doc comment restored; Reconnecting
swallows a stray DisconnectObserved (test).
9. Stall wire test: 120 s session timeout, 3000-cycle subscription lifetime, one further
bad keep-alive tick, 60 s headroom on the post-recovery waits (5/5 green).
- Endpoint rewrite: the driver now connects to the configured host AND port (scheme
match, advertised path kept) instead of the server-advertised URL — fixes NAT/port-map
upstreams and lets an in-test proxy carry the session (SDK SelectEndpoint rule).
- TcpStallProxy + OpcUaClientDriverStallWireTests: the in-place blip (#670) is now
wire-tested on loopback — one Bad, frozen read stamp, same session, identical value
republished Good, a post-recovery change arrives, no source-time regression after
the SDK's late backlog flush.
- Defect found by that test, fixed: a change published right after a stall rode a
Publish response the SDK timed out and never republished, leaving the node Good on
the pre-change value indefinitely. New trailing reconcile read (Timeout +
KeepAliveInterval after recovery) publishes any Good value newer than the last
accepted one, through the replay guard's mark.
- IDriverConnectionLossSource (Core.Abstractions): opt-in definitive-loss signal.
DriverInstanceActor attaches in PreStart / detaches in PostStop and turns a raise
into a disconnect only while Connected. OpcUaClient raises once per session on
keep-alive BadSessionIdInvalid/BadSessionClosed/BadSessionNotActivated/
BadServerHalted (measured: the SDK never re-opens a halted channel) or a dropped
subscription; ambiguous codes stay with the #527 watchdog.
- Replay guard: one Information summary per recovery when the window closes
("dropped N late notifications across M refs"), with a timer so quiet
subscriptions log it too.
- ReconnectPeriod deleted (options, AdminUI form, docs, tests); stored configs that
carry reconnectPeriod still parse in the factory, probe and browser.
- Docs: OpcUaClient.md, DriverLifecycle.md, driver-specs.md, CLAUDE.md.
- IHistorianDataSource.ReadEventsAsync(..., bool reverse, ...) overload: reverse = Part 11 window (lo, hi]
newest-first by (time, id) DESC. Default forwards forward reads and throws NotSupportedException for
reverse (Null); Gateway refuses explicitly (ascending-only stream). Server answers
BadHistoryOperationUnsupported instead of silently returning the earliest N ascending.
- SqlServer / QuestDB serve reverse natively (ORDER BY time DESC, id DESC + TOP/LIMIT).
- Node manager: reverse event reads page with continuation points; direction stored in the cursor
(HistoryContinuationState.Reverse) so a resume continues in the cursor's direction; reverse tie clusters
over-fetched forward and sliced from the newest end (SliceTieCluster(reverse:)); end-only reads with a
cap page backward from EndTime (mirrors raw).
- Resumed event pages over-fetch by the boundary skip, so every non-final page is a full cap page.
- Tests: node-manager reverse paging (ties, clusters, coarse resolution, overfetch bound, resume
direction both ways, end-only, unsupported backend); shared EventReadConformance on SqlServer +
QuestDB; over-the-wire reverse paging; offline Gateway pin of the UTC DateTime.MaxValue bound through
the published client's proto conversion (in-process gRPC capture) and FILETIME.
- docs/Historian.md event paging section.
- HistoryModifiedValue gains explicit SourceTimeUtc (SqlServer + QuestDB populate it); the node manager's resume cursor uses it instead of the prior value's nullable source timestamp (MinValue for inserts).
- ACL test now uses a trail-returning data source and asserts Good + data on the allow leg.
- Node-manager tests: end-only backward open-ended paging, reverse resume cursor, null-prior cursor.
- QuestDB updater logs a Warning (tag + time range) when a sample write fails after its trail rows landed.
- docs/Historian.md: rolling-upgrade window, IDENTITY-vs-commit ordering, QuestDB cross-node ModifiedId clock ordering.
Every HistoryUpdate a SQL backend applies now leaves a modification trail
(prior value, principal, Part 11 update type, modification time), and
HistoryReadRaw with IsReadModified=true serves it as HistoryModifiedData.
- Core: HistoryUpdateContext threaded into all three IHistorianDataUpdater
methods; IHistorianDataSource.ReadModifiedAsync (default NotSupported =>
BadHistoryOperationUnsupported on Gateway/Null); HistoryModified* contracts.
- SqlServer: schema v2 (002_sample_modified.sql, RequiredVersion=2, docs copy);
trail written by OUTPUT ... INTO on the same MERGE/DELETE statement, so a
failed update leaves no audit row; retention purges SampleModified per tag on
the source-time cutoff; ReadModifiedAsync keyed on (SourceTimeUtc, ModifiedId).
- QuestDB: append-only {prefix}sample_modified (TTL like samples), trail row
written BEFORE the change (orphan-on-crash, never an untracked change);
existence reads now carry the prior value; ReadModifiedAsync.
- Node manager: modified reads dispatch + page via the #669 continuation store
(HistoryContinuationState gains HistoryCursorKind + LastModifiedId), gated by
the existing HistoryRead decision; session principal / key id passed to the
updater. IsDeleteModified stays unsupported.
- Client.CLI: historyread --modified.
- Tests: node-manager dispatch/paging/cursor binding/principal threading,
over-the-wire HistoryModifiedData, shared ModifiedValueConformance on both
backends, SqlServer atomicity (forced trail failure => no change) + v1->v2
upgrade + retention trail purge.
- Docs: Historian.md (Modified-value history section, schema v2 upgrade note),
security.md, Client.CLI.md, CLAUDE.md.
M1: a subscription that dies while the session lives (outage longer than
the subscription lifetime but shorter than the session timeout) used to
end Healthy with fresh keep-alive stamps and frozen values. PublishError
BadNoSubscription / BadSubscriptionIdInvalid naming a tracked
subscription, or a tracked subscription whose SDK PublishingStopped
persists one more keep-alive window + 5 s across good keep-alives, now
declares it lost: Degraded, outage published once, and nothing advances
LastSuccessfulRead until the session is released, so the #527 watchdog
re-initialises and re-subscribes. Both detectors wire-tested.
M2: in-place recovery is bound to the session whose keep-alive recovered;
one overtaken by a re-initialise no longer re-arms the new session's
outage latch or degrades its health (ReadCoreAsync expectedSession).
L1 CAS health updates; L2 re-check before each recovery publish; L3 skip
CloseSession on a lost session; L4 SDK log forwarding rate-limited
(20/min); L5 per-driver SDK LoggerFactory disposed with the driver.
Wire test asserts the read stamp stays frozen while the server is down.
A bad keep-alive now degrades health (LastSuccessfulRead preserved) and,
once per outage, publishes BadNoCommunication (value retained) for every
subscribed ref plus a quality-only annotation on subscribed alarm
conditions. Good keep-alives and data/event notifications advance
LastSuccessfulRead, so an idle-but-alive subscription never looks dead
to the #527 watchdog. A keep-alive that recovers on the same session
re-reads the Bad refs and republishes them Good; a session that does not
come back is recovered by the watchdog's ShutdownAsync + InitializeAsync
+ re-subscribe.
Deletes the SessionReconnectHandler wiring (it retried forever in SDK
1.5.378, cloned subscriptions the driver never re-tracked and kept health
Healthy), OnReconnectComplete, TryRearmReconnect and the reconnect_*
counters (new keepalive_recovered). Teardown of a lost session skips
wire deletes and bounds CloseSession. SDK warnings reach the driver log.
Wire test reworked: restart => Bad, then watchdog-style reinit => Good.
A capped events read now pages: the source's truncation flag triggers a
session-bound cursor (time inclusive + tie skip), oversized tie clusters
are paged within via a bounded half-open over-fetch, and release/unknown/
cross-kind points behave as for Raw.
HistoryRead is served server-side by IHistorianDataSource; nothing ever dispatched
to a driver's IHistoryProvider. Removes IHistoryProvider, the OpcUaClient history
passthrough, DriverCapability.HistoryRead (+ resilience tier rows and AdminUI row),
HistoryReadStatusException and its node-manager catches, and the tests that only
covered them. Shared result types and HistoryAggregateNotSupportedException stay
(moved to Historian/HistoryReadContracts.cs). A stored ResilienceConfig still
carrying a HistoryRead key parses (diagnostic only; new test).
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
The tests probe a free port (bind 0, release) and start the SDK server later; under a
highly parallel run another test can take the port in between and the SDK fails with
'Failed to establish tcp listener sockets for Ipv4 and IPv6.'. OpcUaHostStart.StartAsync
builds a fresh host + server on a fresh port per attempt (up to 5) when the failure is a
bind failure; all 45 start sites in OpcUaServer.Tests, OpcUaServer.IntegrationTests and
Runtime.Tests use it. Per-attempt GUID ApplicationUris are hoisted out of the host factory
because a changed URI against a reused PKI store fails with 'Cannot access private key'.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
MAJOR-1: a deploy that changes a driver's config respawns it, and the fresh instance's empty told
record re-sent Raise for every still-active alarm, un-acking acknowledged conditions and writing a
duplicate "Activated" alerts row. NativeAlarmProjector now treats Raise on an already-active
condition as a re-statement (keeps Acked; ForwardNativeAlarm skips the alerts row); only Retrigger
(or inactive->active) un-acks. Sources whose upstream ack state is authoritative send Retrigger for
an unacked re-statement: OpcUaClient on first sight (no prior told), Galaxy for an unacked active
snapshot entry. Runtime E2E drives a FRESH FOCAS driver after a redeploy and asserts the ack survives.
MAJOR-2: a failed FOCAS alarm read annotates each subscribed condition BadNoCommunication once per
outage (#626 quality-only path) with one Warning (MINOR-6), lifted to Good on recovery; failed alarm
reads degrade driver health with LastSuccessfulRead frozen (successful ones advance it), so an
alarm-only driver trips the #527 comms-loss watchdog.
MINOR-3 CLAUDE.md #630 bullet; MINOR-4 split line; MINOR-5 a non-empty cnc_rdalmmsg2 payload that
fits neither stride throws; MINOR-7 value-tag + parsed-address tables are built and swapped, never
cleared in place under the retained poll engine. Docs corrected (FOCAS.md, AlarmTracking.md, CLAUDE.md).
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
Nothing read the mapping table beyond the startup validator; v3 UNS projection is
explicit via UnsTagReference. Legacy keys in stored DriverConfig are ignored (pinned).
Reverts the docker-dev opc-plc seed workaround from fdee129f.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
Re-review of 3de2cc3b/454775c6:
- AlarmTransitions could not reach (inactive, unacked): (active,acked)->(inactive,unacked) emitted Clear
(host stayed acked) and a first-seen cleared-unacked condition emitted nothing. The table is now total;
an exhaustive test replays every (prior, target) pair through the projector's semantics.
- The per-RawPath read-compute-emit was a lock-free TryGetValue/set across SDK publish threads; it now runs
under one lock with the projection and emission.
- Condition BRANCH events (non-null BranchId) were projected (flipping the trunk) and remembered as the ack
target (acking the branch); they are dropped. BranchId is select clause 9.
- EventId is copied, not aliased from the decoded notification.
- An unchanged state re-emitted Unspecified; it now emits nothing unless message/severity changed (an
Unspecified projects from the host projector's default after a redeploy reset it).
- Exact upstream severity rides OpcUaSeverity (#626) instead of being re-bucketed.
- ShutdownAsync no longer forgets the last-told state: a reinit re-subscribes the same set and the refresh
would otherwise re-raise every acked alarm. A CHANGED set (host rebuilt) forgets it.
ConditionRefresh: called after the alarm event item is created, after an in-place reconnect (subscriptions
found on the new session by display name, since a recreate clones them) and on RefreshRequired. Refresh
markers are never projected. BadNotSupported/BadMethodInvalid/... logs once. Wire test: a condition already
active before subscribe is reported Raise; a release+resubscribe refresh re-raises nothing (falsified by
disabling the refresh call).
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
A full RebuildAddressSpace recreated every native Part 9 condition inactive +
acknowledged, and when the alarm-tag set was unchanged (e.g. one
UnsTagReference added to an alarm-bearing raw tag) nothing re-told the new node
its state: the host does not re-subscribe for an unchanged set, and Galaxy /
OpcUaClient have no snapshot to replay anyway. Active alarms read normal until
their next device transition.
OtOpcUaNodeManager now captures each NATIVE condition's live state (from the
node, so a client-applied ack is kept) before the rebuild clears, restores it
when the same id is re-materialised native in the same apply, and reports ONE
condition event per restored off-normal condition at the new
IOpcUaAddressSpaceSink.CompleteAddressSpaceApply (after notifier wiring).
Unclaimed captures are discarded there, so a later re-add is fresh. Quality is
carried silently for normal conditions too (it is only re-annotated on a
connectivity edge). Scripted conditions are untouched (#487 re-asserts them).
OpcUaPublishActor calls CompleteAddressSpaceApply at the end of every apply.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
OtOpcUaNodeManager.MapSeverity re-bucketed every projected severity onto the
SDK's five EventSeverity values (<800 -> 700, else 900), defeating #626's exact
OpcUaSeverity: an MTConnect Fault (800) read and evented as 900; a scripted
alarm graded 1000 published 900 while /alerts said 1000; a native Low (200)
published 300. EventSeverity merely names points on the 1..1000 scale, so the
node now carries the value clamped to 1..1000 (ToPart9Severity), at
materialise, projection and in the delta gate.
MTConnect wire test now asserts Fault ActiveState=true/Severity=800 and the
Normal clear ActiveState=false/Retain=false/Severity=800.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
EventFilter.AddSelectClause(type, "ActiveState/Id") does not split the string;
it selects a single QualifiedName named "ActiveState/Id", which no event carries.
AckedState/Id, ActiveState/Id and EnabledState/Id therefore always arrived null
and Client.CLI 'alarms' (and Client.UI) reported every alarm inactive and
unacknowledged while a direct Read said Active. Pre-existing since a2883b82;
server-side event delivery was correct (proven with two-element select clauses,
incl. after #629). Select them with explicit two-element browse paths.
Over-the-wire test drives OpcUaClientService.SubscribeAlarmsAsync against the
in-process server (native + scripted); ServerEventRig now also selects
ActiveState/Id, Severity and Retain.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
MTConnectConditionAlarmWireTests drives a scripted Agent's Fault/Normal through the real
driver, NativeAlarmProjector and sink to a client event subscription on the raw device
folder. docs/drivers/MTConnect.md replaces 'CONDITION v1: plain String' with the alarm
mapping, opt-in authoring, multi-condition, ack, replay and comms-loss behaviour, and a
live-check recipe; EVENT vocabularies as enumerations marked won't-fix. AlarmTracking.md
lists the MTConnect source and the two new AlarmEventArgs fields.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
New() ran FindNodeInAddressSpace under Lock, taking other node managers' locks (lock-order
risk); the three AlarmConditionType_ShelvingState_* ids are now a static set. Adds wire tests:
TimedShelve/Unshelve by the condition's own instance method ids (object = condition or its
ShelvingState) succeed and report, and a ShelvedStateMachineType_* id call is pinned as
BadMethodInvalid with a positive control.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
Create(assignNodeIds: true) asked CustomNodeManager2.New, whose default returns the
node's current id, so every condition child kept the type's ns=0 instance-declaration id
(or an SDK-generated ns=0 number): translate of a child path returned BadNoMatch and a
Read of a browsed child id was BadNodeIdUnknown or served from the TYPE (UnshelveTime 0
on a condition timed-shelved for a minute), bypassing the data-plane ACL.
OtOpcUaNodeManager.New now derives {conditionId}/{browsePath} in the condition's
namespace, so the ACL scope of a child is its condition's scope plus the path. The
ShelvingState methods adopt their original AlarmConditionType_ShelvingState_* id as
MethodDeclarationId so clients calling them by that id still resolve. Condition removal
and rebuild forget the whole PredefinedNodes subtree so a removed condition's children
stop answering.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
MAJOR-1: R4's exact element-type match refused ScadaBridge's CLR-list
writes (its element types are only Boolean/Int32/Float/Double/String/
DateTime) to every Int16/UInt16/Byte/UInt32/Int64/UInt64 array node and a
Double list to a Float array. EvaluateEquipmentWriteStructure now converts
a numeric array of another numeric element type element-wise, CHECKED, into
the node's element type and hands the converted array back through
OnEquipmentTagWrite's ref value, so the node stores and the driver receives
the node's own type. Any out-of-range, fractional-to-integer, NaN/Inf-to-
integer or Float-overflowing element refuses the whole write BadTypeMismatch
(nothing dispatched) - so the UInt32 -> Int32 bit reinterpretation stays
closed. Non-numeric mismatches stay refused. The wrong 'no client relies on
a looser rule' comment is corrected.
MINOR-1: the array-value-to-scalar-node refusal broke writes back to
browse-committed array tags (committed scalar, isArray never set) on
pass-through drivers. It now applies only when the owning driver's scalar
encoder cannot take an array (DriverArrayWriteSupport.
RefusesArrayValueOnScalarTag: Modbus, S7), carried RawTagPlan.
ScalarRefusesArrayValue / UnsReferenceVariable.BackingScalarRefusesArrayValue
-> EnsureVariable(refuseArrayOnScalar) -> a per-node set in the node
manager. OpcUaClient/Galaxy/others keep pre-#610 dispatch. Not on the
classifier whitelist (driver-type edit rebuilds); a mirror whose flag
changes is recreated, not updated in place.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
MAJOR-1: the SDK skips TypeInfo.IsInstanceOfDataType on any node with an
OnWriteValue handler (every writable equipment node), and the node manager's
fail-fast treated numeric<->numeric as compatible, so a UInt32[] to a Galaxy
Int32 array matched MxValueEncoder's int[] arm by CLR covariance and was
written bit-reinterpreted with a Good result. EvaluateEquipmentWriteStructure
now matches an ARRAY write's element type exactly (Byte[]/ByteString the only
equivalence; Variant[]/object[] refused) -> BadTypeMismatch, nothing
dispatched. MxValueEncoder's int[]/long[] arms are exact-type guarded too, and
the Galaxy parity test's false "the SDK refuses" premise is corrected (the
UInt32/UInt64 exclusion is now the encoder's own answer). Scalar writes keep
numeric widening by decision: consumers write CLR-typed values (Double to a
Float node) and every driver's scalar encoder range-checks.
MINOR: Modbus row honours maxRegistersPerWrite (smallest of DriverConfig /
the tag's DeviceConfig, default 123) and FC15's 1968-coil ceiling, and
requires region + numeric address; Modbus/S7/Galaxy require isArray + integer
arrayLength >= 1 (Galaxy: an unbounded node would let a short write resize the
attribute); an array value to a scalar node is refused inline. Docs: Uns.md
array-write rules + upgrade note (ReadWrite array tags become client-writable
on first boot), Modbus.md, Galaxy.md.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
Review R1 M2: since #597 the SDK timer fires at real expiry, and OnTimedUnshelve routed an operator-style
Unshelve by 'system' from both pair nodes, pre-empting the engine's AutoUnshelve. The engine owns expiry,
so the callback now routes nothing. Integration test: an engine stand-in that acts on a routed Unshelve and
expires late, plus a wrapped OnTimedUnshelve (positive control: the SDK timer fired).
Review R1 m1: Part9StateMachine.ApplyAcknowledge records a commented re-ack as AddComment (persisted and
replicated) instead of a NoOp; an uncommented re-ack is still a no-op.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
Array nodes were forced read-only for every driver. A new single authority,
Core.Abstractions DriverArrayWriteSupport, says which (driver, element type)
pairs encode a whole-array write: Modbus (Coils / numeric HoldingRegisters),
S7 (Byte/Int16/UInt16/Int32/UInt32/Float32), OpcUaClient (pass-through) and
Galaxy (Boolean/Int32/Int64/Float/Double/String/DateTime). Everything else
stays read-only, so the server never advertises a write the driver refuses.
- Composer derives RawTagPlan.ArrayWritable + UnsReferenceVariable
.BackingArrayWritable at compose time (both seams, byte-parity); the
applier's one writability rule is Writable && (!IsArray || ArrayWritable)
for materialise and surgical paths, raw and UNS alike.
- ArrayWritable is on the classifier's surgical raw-tag whitelist and
mirrored on the UNS record (UnsReferenceBackingParityTests updated).
- Node manager refuses a wrong-length / non-array value on an array node
(BadTypeMismatch) and any IndexRange write (BadWriteNotSupported) inline,
before dispatch; WriteOperate/ACL gates and the revert are unchanged.
- Per-driver parity tests pin the table against the real Modbus write path,
S7 EncodeArrayBlock and Galaxy MxValueEncoder (UInt32/UInt64 excluded:
array covariance reinterprets their bits).
- Over-the-wire proof in OpcUaServer.IntegrationTests (ArrayWriteWireTests).
- ValueRank > 1 documented as out of scope by decision (docs/Uns.md).
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
- Native-condition Acknowledge on a non-Primary node returns BadInvalidState (nothing
routed/applied/reported) via NativeAlarmAckPrimaryGate, fed from
IDriverPrimaryRoleSource by OtOpcUaServerHostedService.
- A re-ack carrying a comment reports one comment event (Acked/Confirmed unchanged).
- TimedShelve applies its requested duration and the scripted projection carries
UnshelveAtUtc, so ShelvingState/UnshelveTime counts down instead of ~24.8 days.
- Native re-ack still routed to the driver (deliberate: documented retry path), pinned.
- AdminUI /alerts client ack/shelve path test; docs/AlarmTracking.md decisions incl.
accepted SDK EventsMonitored residual (item 6).
- Also #599/03/S20: RemoveEquipmentSubtree severs inverse Organizes edges.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
Joseph Doherty