feat(opcuaclient): #676 follow-ups — endpoint rewrite, stall wire test, fast definitive-loss recovery
- Endpoint rewrite: the driver now connects to the configured host AND port (scheme match, advertised path kept) instead of the server-advertised URL — fixes NAT/port-map upstreams and lets an in-test proxy carry the session (SDK SelectEndpoint rule). - TcpStallProxy + OpcUaClientDriverStallWireTests: the in-place blip (#670) is now wire-tested on loopback — one Bad, frozen read stamp, same session, identical value republished Good, a post-recovery change arrives, no source-time regression after the SDK's late backlog flush. - Defect found by that test, fixed: a change published right after a stall rode a Publish response the SDK timed out and never republished, leaving the node Good on the pre-change value indefinitely. New trailing reconcile read (Timeout + KeepAliveInterval after recovery) publishes any Good value newer than the last accepted one, through the replay guard's mark. - IDriverConnectionLossSource (Core.Abstractions): opt-in definitive-loss signal. DriverInstanceActor attaches in PreStart / detaches in PostStop and turns a raise into a disconnect only while Connected. OpcUaClient raises once per session on keep-alive BadSessionIdInvalid/BadSessionClosed/BadSessionNotActivated/ BadServerHalted (measured: the SDK never re-opens a halted channel) or a dropped subscription; ambiguous codes stay with the #527 watchdog. - Replay guard: one Information summary per recovery when the window closes ("dropped N late notifications across M refs"), with a timer so quiet subscriptions log it too. - ReconnectPeriod deleted (options, AdminUI form, docs, tests); stored configs that carry reconnectPeriod still parse in the factory, probe and browser. - Docs: OpcUaClient.md, DriverLifecycle.md, driver-specs.md, CLAUDE.md.
This commit is contained in:
Joseph Doherty
@@ -321,6 +321,12 @@ non-`Healthy` state **and** its `LastSuccessfulRead` has been frozen for 90 s. T
|
||||
`DefaultReconnectInterval`. Unlike the #523 drift detector this generates **no** traffic on a healthy
|
||||
system — it is a local `GetHealth()` read, and only reaches the network once a driver has already stopped
|
||||
reading.
|
||||
- **Fast path for DEFINITIVE losses (#676):** a driver implementing the opt-in `IDriverConnectionLossSource` raises
|
||||
`ConnectionLost` (once per connection) when its protocol proves the connection can never recover in place — OpcUaClient:
|
||||
keep-alive `BadSessionIdInvalid`/`BadSessionClosed`/`BadSessionNotActivated`/`BadServerHalted` or a dropped
|
||||
subscription — and `DriverInstanceActor` (attach PreStart, detach PostStop) turns it into the same disconnect only
|
||||
while Connected; ambiguous failures (timeouts, `BadNoCommunication`, a stalled socket) must never raise and stay with
|
||||
the watchdog's conjunction. `docs/DriverLifecycle.md`.
|
||||
|
||||
- **What comms loss now does downstream — one contract, six seams (archreview R3-02).** "A value consumer
|
||||
never reports a quality better than its source's" is stated once in `docs/DriverLifecycle.md` §"The
|
||||
|
||||
@@ -441,6 +441,31 @@ Two consequences worth knowing:
|
||||
**notices**, so a silent-success termination path — a stream that ends cleanly, a poll loop that exits
|
||||
without throwing — bypasses it entirely.
|
||||
|
||||
**A driver that KNOWS its connection is gone can skip the wait: `IDriverConnectionLossSource` (Gitea #676).** The
|
||||
watchdog has to prove a loss from silence, so it costs ~90 s even when the protocol already said "this connection
|
||||
will never come back". An opt-in `Core.Abstractions` interface lets a driver say so:
|
||||
`event EventHandler<DriverConnectionLossEventArgs> ConnectionLost` (a reason string). `DriverInstanceActor` attaches
|
||||
in `PreStart` and detaches in `PostStop` — the same lifetime as `IRediscoverable`, for the same reason (the `IDriver`
|
||||
outlives the actor on a respawn) — marshals each raise to the actor thread (`Self.Tell`; actor state is never touched
|
||||
on the driver's thread), and acts on it **only while `Connected`**, through the very handler the watchdog's
|
||||
`DisconnectObserved` uses (detach, record a fault, `Reconnecting`, teardown-then-init on the retry). In
|
||||
`Connecting`/`Reconnecting`/`Stubbed` it is ignored, not deferred: a re-initialise is already pending, and acting on a
|
||||
stale raise later could tear down the connection that attempt is building. The two are complementary, not
|
||||
alternatives:
|
||||
|
||||
- **The signal is for DEFINITIVE losses only.** A driver must raise only when no in-place recovery is possible, at most
|
||||
once per connection, re-armed by a re-initialise. An ambiguous failure — a timeout, a stalled socket, "no
|
||||
communication" — must not raise: a stalled link that resumes keeps its session, subscriptions and in-place recovery,
|
||||
and tearing it down would cost all three. Those stay with the watchdog, whose conjunction is the honest test for them.
|
||||
- **Today only `OpcUaClientDriver` implements it:** keep-alive `BadSessionIdInvalid` / `BadSessionClosed` /
|
||||
`BadSessionNotActivated` / `BadServerHalted`, or a subscription the server dropped (see
|
||||
[OpcUaClient.md](drivers/OpcUaClient.md) §"Upstream outage and recovery" for why `BadServerHalted` is on the list —
|
||||
it was measured, the SDK never re-opens a halted channel). A gracefully restarted upstream therefore recovers in
|
||||
about one reconnect interval instead of ~100 s; a killed one still waits for the watchdog.
|
||||
- Pinned by `DriverInstanceActorConnectionLossSignalTests` (Reconnecting within seconds while the watchdog is set to an
|
||||
hour; a falsification control with no raise that stays Connected; a raise mid-connect ignored; detach on stop) and
|
||||
`OpcUaClientConnectionLossSignalTests` (definitive raises once, ambiguous never, re-armed after re-init).
|
||||
|
||||
**The reconnect retry now tears down before re-initialising.** `Reconnecting`'s `RetryConnect` calls
|
||||
`ShutdownAsync` before `InitializeAsync` — the sequence every driver's own `ReinitializeAsync` already
|
||||
uses — because several drivers **overwrite** an `IAsyncDisposable` transport field inside `InitializeAsync`
|
||||
|
||||
@@ -50,7 +50,18 @@ provides ordered **failover** — the driver tries each candidate in turn at eve
|
||||
4840 / 4841). See
|
||||
`src/Drivers/ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Contracts/OpcUaClientDriverOptions.cs`
|
||||
for every field (security policy/mode, auth type, session timeout, keep-alive,
|
||||
browse root, node/depth caps). `ReconnectPeriod` is still parsed but no longer used (#670).
|
||||
browse root, node/depth caps). `ReconnectPeriod` was **deleted** (#676 — unused since #670 removed the SDK reconnect
|
||||
handler, and the AdminUI no longer shows it); stored configs that still carry `reconnectPeriod` keep parsing in the
|
||||
factory, the Test-Connect probe and the browse picker (unknown keys are skipped), and the form drops it on the next save.
|
||||
|
||||
### Endpoint address: the configured host and port win (#676)
|
||||
|
||||
GetEndpoints returns each endpoint with the URL the **server** believes it lives at. Behind NAT, a port map, a
|
||||
container port publish or a proxy that address is unreachable from the client — or reachable but bypassing the proxy.
|
||||
The driver therefore rewrites the selected endpoint's **host and port** to the configured URL's whenever the schemes
|
||||
match, keeping the advertised path (the SDK's own `CoreClientUtils.SelectEndpoint` rule, which the driver's
|
||||
policy-aware endpoint selection used to bypass). A different scheme is left alone; an unparseable advertised URL falls
|
||||
back to the configured one. `OpcUaClientDriver.RewriteEndpointUrl`.
|
||||
|
||||
### Session lifetime
|
||||
|
||||
@@ -83,12 +94,38 @@ The session keep-alive (`KeepAliveInterval`, default 5 s) is the liveness signal
|
||||
without moving the mark. Outside that window every notification is
|
||||
accepted whatever its timestamp, so an upstream clock that steps backwards (NTP, a PLC clock reset) never
|
||||
freezes a node. The outage Bad never moves the comparison; a re-initialise resets it.
|
||||
⚠️ **By design, inside the window a notification whose source time EQUALS the last accepted one is dropped** — so a
|
||||
status-only change that keeps the old source timestamp (not what OPC UA servers are supposed to do) is lost during
|
||||
the window only. When the window closes the driver logs ONE Information line — `post-recovery replay window closed —
|
||||
dropped N late notifications across M refs after recovery` — because the per-drop line is Debug and the
|
||||
`stale_notification_dropped` counter is OTel-only, which made the guard unobservable on the docker-dev rig (#676).
|
||||
- **Trailing re-read after an in-place recovery (#676).** Found by the TCP-stall wire test: a change the server
|
||||
published just after the stall ended rode a Publish response that had been in flight across the stall; the SDK
|
||||
timed that request out (`BadTimeout`), discarded the response and never republished the message (the following
|
||||
keep-alives moved the sequence number past it), so the node stayed **Good on the pre-change value indefinitely**.
|
||||
`Timeout + KeepAliveInterval` after the recovery — when every request in flight across the stall has completed or
|
||||
timed out — every subscribed ref is read once more, and any Good value **newer** than the last one accepted for that
|
||||
ref is published (through the replay guard's mark while the window is open, so it can never regress a node). An
|
||||
Information line names how many refs it had to repair.
|
||||
- **The session does not come back** (an upstream restart: the server forgot the session) ⇒ the driver stays
|
||||
`Degraded` with its read stamp frozen, which is exactly the #527 comms-loss watchdog's trip condition. After 90 s
|
||||
`DriverInstanceActor` runs `ShutdownAsync` + `InitializeAsync` (retried every 10 s while the server is down) and
|
||||
re-subscribes data + alarms; the new subscription's initial values come back Good. Alarm last-told state survives
|
||||
the re-initialise (#619), so the post-subscribe `ConditionRefresh` raises no un-ack flicker; the host's reconnect
|
||||
annotation restores condition quality.
|
||||
`Degraded` with its read stamp frozen, which is the #527 comms-loss watchdog's trip condition; `DriverInstanceActor`
|
||||
runs `ShutdownAsync` + `InitializeAsync` (retried every 10 s while the server is down) and re-subscribes data +
|
||||
alarms; the new subscription's initial values come back Good. Alarm last-told state survives the re-initialise
|
||||
(#619), so the post-subscribe `ConditionRefresh` raises no un-ack flicker; the host's reconnect annotation restores
|
||||
condition quality.
|
||||
- **Fast recovery for a DEFINITIVELY lost session (#676).** The driver implements `IDriverConnectionLossSource` and
|
||||
raises `ConnectionLost` — **once per session**, re-armed by a re-initialise — when the loss is certain, so the host
|
||||
re-initialises at once instead of after the watchdog's 90 s. Definitive means: a keep-alive status of
|
||||
`BadSessionIdInvalid` / `BadSessionClosed` / `BadSessionNotActivated` (the server forgot, closed or never activated
|
||||
the session) or `BadServerHalted`, or a tracked subscription declared lost (below). `BadServerHalted` is on the list
|
||||
because it was **measured**: on the restart wire test a gracefully stopped server reports `BadServerHalted` (and the
|
||||
keep-alives alternate it with `BadNoCommunication`), and the SDK never re-opens a channel the server halted — 15 s
|
||||
after the server was back, the same session still failed every request with `BadServerHalted`; `BadSessionIdInvalid`
|
||||
never arrived. Everything else — `BadNoCommunication`, `BadConnectionClosed`, `BadNotConnected`,
|
||||
`BadRequestTimeout`/`BadTimeout` (what a stalled link produces) — is **ambiguous** (the link may resume and keep its
|
||||
session, see the stall test) and stays with the watchdog. Consequence: a gracefully restarted upstream recovers in
|
||||
roughly one reconnect interval (≈10 s) instead of ~100 s; an upstream that vanishes without a halt (killed, cable
|
||||
pulled) still waits for the watchdog.
|
||||
- **The subscription dies but the session lives** (an outage longer than the subscription lifetime —
|
||||
`LifetimeCount` x publishing interval, often well under the session timeout — or a server that drops it) ⇒ keep-alives
|
||||
stay Good, so they cannot be the signal. A `PublishError` of `BadNoSubscription` (while subscriptions are tracked) or
|
||||
@@ -96,7 +133,8 @@ The session keep-alive (`KeepAliveInterval`, default 5 s) is the liveness signal
|
||||
persists for one more subscription keep-alive window + 5 s across good keep-alives, declares it lost: `Degraded`
|
||||
(`"subscription lost: …"`), the outage published once, and — sticky until the session is released — **nothing**
|
||||
advances `LastSuccessfulRead` any more (not good keep-alives, not a sibling subscription's notifications), so the
|
||||
watchdog's re-initialise recreates it. Both detectors are wire-tested independently.
|
||||
watchdog's re-initialise recreates it. Both detectors are wire-tested independently. A dead subscription never comes
|
||||
back on its session, so this also raises `ConnectionLost` (#676) and the re-initialise happens at once.
|
||||
- An in-place recovery is bound to the session whose keep-alive recovered: one overtaken by a re-initialise neither
|
||||
publishes, nor degrades, nor re-arms the outage latch of the new session.
|
||||
|
||||
@@ -126,7 +164,7 @@ initialise (the AdminUI form drops them on the next save). Pinned by
|
||||
|
||||
## Capability surface
|
||||
|
||||
`OpcUaClientDriver : IDriver, ITagDiscovery, IReadable, IWritable, ISubscribable, IHostConnectivityProbe, IAlarmSource`
|
||||
`OpcUaClientDriver : IDriver, ITagDiscovery, IReadable, IWritable, ISubscribable, IHostConnectivityProbe, IAlarmSource, IDriverConnectionLossSource`
|
||||
(`src/Drivers/ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient/OpcUaClientDriver.cs:31`).
|
||||
|
||||
| Capability | Path | Notes |
|
||||
@@ -253,6 +291,14 @@ the reconnect handler, #670). They are not part of `DriverHealth` or the
|
||||
- **Integration fixture** — exercises the driver against a reference OPC UA
|
||||
server (opc-plc) on the shared docker host; see
|
||||
[OpcUaClient-Test-Fixture.md](OpcUaClient-Test-Fixture.md) for the coverage map.
|
||||
- **Wire tests against the in-process server** — `tests/Server/ZB.MOM.WW.OtOpcUa.OpcUaServer.IntegrationTests/`
|
||||
`OpcUaClientDriver*WireTests` (no Docker). `OpcUaClientDriverStallWireTests` (#676) covers the in-place blip that
|
||||
used to be live-gate-only: the driver connects through `TcpStallProxy`, an in-test TCP forwarder whose pause holds
|
||||
every byte without closing anything (which only works because of the endpoint rewrite above); it asserts one Bad,
|
||||
a frozen read stamp, recovery on the SAME session, the identical value republished Good, a change published right
|
||||
after recovery still arriving, and no source-time regression once the SDK's late backlog flush has arrived.
|
||||
`OpcUaClientDriverReconnectWireTests` covers the server restart (incl. the `BadServerHalted` → `ConnectionLost` signal)
|
||||
and the subscription-lost case.
|
||||
|
||||
## Further reading
|
||||
|
||||
|
||||
@@ -815,7 +815,6 @@ Already used by Client.Shared in the existing codebase.
|
||||
| `Password` | string? | — | For Username auth |
|
||||
| `SessionTimeoutMs` | int | 120000 | Server-negotiated session timeout |
|
||||
| `KeepAliveIntervalMs` | int | 5000 | Session keep-alive interval |
|
||||
| `ReconnectPeriodMs` | int | 5000 | Initial reconnect delay |
|
||||
| `BrowseStrategy` | enum | Full | `Full` (browse all at startup), `Lazy`, `Hybrid` |
|
||||
| `BrowseRoot` | string? | — | Optional root NodeId to mirror (default: ObjectsFolder) |
|
||||
| `AutoAcceptCertificates` | bool | false | Accept untrusted server certificates |
|
||||
|
||||
@@ -0,0 +1,31 @@
|
||||
namespace ZB.MOM.WW.OtOpcUa.Core.Abstractions;
|
||||
|
||||
/// <summary>
|
||||
/// Optional driver capability (Gitea #676) — a driver that can tell, from its protocol, that its connection is
|
||||
/// DEFINITIVELY gone (it can never recover in place, only a re-initialise brings it back) raises
|
||||
/// <see cref="ConnectionLost"/> so the host re-initialises it at once instead of waiting out the #527 comms-loss
|
||||
/// watchdog (~90 s of frozen <see cref="DriverHealth.LastSuccessfulRead"/>).
|
||||
/// </summary>
|
||||
/// <remarks>
|
||||
/// <para>
|
||||
/// <b>Definitive only.</b> An AMBIGUOUS failure — a timeout, a stalled socket, "no communication" — must NOT
|
||||
/// raise: the connection may yet resume in place (a <c>docker pause</c>, a congested link), and tearing it
|
||||
/// down would cost the session, its subscriptions and the in-place recovery. Ambiguous failures keep going
|
||||
/// through the watchdog, whose conjunction (non-Healthy AND a frozen read stamp) is the honest test for them.
|
||||
/// </para>
|
||||
/// <para>
|
||||
/// The host (<c>DriverInstanceActor</c>) acts on a raise only while the driver is Connected — in any other
|
||||
/// state a re-initialise is already pending or running — and it subscribes for its own lifetime, not per
|
||||
/// connect, because the <see cref="IDriver"/> instance can outlive the actor. A driver should raise at most
|
||||
/// once per connection and re-arm when it is re-initialised.
|
||||
/// </para>
|
||||
/// </remarks>
|
||||
public interface IDriverConnectionLossSource
|
||||
{
|
||||
/// <summary>Raised (on the driver's own thread) when the driver's connection is definitively lost.</summary>
|
||||
event EventHandler<DriverConnectionLossEventArgs>? ConnectionLost;
|
||||
}
|
||||
|
||||
/// <summary>Event payload for <see cref="IDriverConnectionLossSource.ConnectionLost"/>.</summary>
|
||||
/// <param name="Reason">Driver-supplied reason for the diagnostic log (e.g. the protocol status that proved the loss).</param>
|
||||
public sealed record DriverConnectionLossEventArgs(string Reason);
|
||||
@@ -101,12 +101,6 @@ public sealed record OpcUaClientDriverOptions
|
||||
/// <summary>Client-side keep-alive interval.</summary>
|
||||
public TimeSpan KeepAliveInterval { get; init; } = TimeSpan.FromSeconds(5);
|
||||
|
||||
/// <summary>
|
||||
/// Retained for config compatibility only — no longer used (Gitea #670). The driver has no in-driver reconnect
|
||||
/// handler; a lost session is recovered by the host's comms-loss watchdog re-initialising the driver.
|
||||
/// </summary>
|
||||
public TimeSpan ReconnectPeriod { get; init; } = TimeSpan.FromSeconds(5);
|
||||
|
||||
/// <summary>
|
||||
/// When <c>true</c>, the driver accepts any self-signed / untrusted server certificate.
|
||||
/// Dev-only — must be <c>false</c> in production so MITM attacks against the opc.tcp
|
||||
|
||||
@@ -29,7 +29,7 @@ namespace ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient;
|
||||
/// back on its own recovers in place.
|
||||
/// </para>
|
||||
/// </remarks>
|
||||
public sealed class OpcUaClientDriver : IDriver, ITagDiscovery, IReadable, IWritable, ISubscribable, IHostConnectivityProbe, IAlarmSource, ISkippedTagReporter, IDisposable, IAsyncDisposable
|
||||
public sealed class OpcUaClientDriver : IDriver, ITagDiscovery, IReadable, IWritable, ISubscribable, IHostConnectivityProbe, IAlarmSource, ISkippedTagReporter, IDriverConnectionLossSource, IDisposable, IAsyncDisposable
|
||||
{
|
||||
/// <summary>Authored tags whose TagConfig carried no usable <c>nodeId</c>, so there is no upstream node
|
||||
/// to dial (Gitea #541). This driver's skip path was the quietest of the twelve: <c>NamespaceMap</c>
|
||||
@@ -83,6 +83,7 @@ public sealed class OpcUaClientDriver : IDriver, ITagDiscovery, IReadable, IWrit
|
||||
_logger = logger ?? NullLogger<OpcUaClientDriver>.Instance;
|
||||
_secretResolver = secretResolver ?? NullSecretResolver.Instance;
|
||||
_sdkTelemetry = logger is null ? SdkTelemetry.Context : SdkTelemetry.ForLogger(logger);
|
||||
PostRecoveryReconcileDelay = () => _options.Timeout + _options.KeepAliveInterval;
|
||||
}
|
||||
|
||||
/// <summary>Mutable so <see cref="InitializeAsync"/> can adopt a re-parsed config on reinitialize
|
||||
@@ -135,6 +136,12 @@ public sealed class OpcUaClientDriver : IDriver, ITagDiscovery, IReadable, IWrit
|
||||
/// <summary>Occurs when the host connectivity status of the remote OPC UA server changes.</summary>
|
||||
public event EventHandler<HostStatusChangedEventArgs>? OnHostStatusChanged;
|
||||
|
||||
/// <inheritdoc />
|
||||
/// <remarks>Gitea #676 — raised at most once per session, and only on a DEFINITIVE loss
|
||||
/// (<see cref="IsDefinitiveSessionLoss"/>, or a tracked subscription the server dropped). Re-armed when the session
|
||||
/// is released (re-initialise / shutdown).</remarks>
|
||||
public event EventHandler<DriverConnectionLossEventArgs>? ConnectionLost;
|
||||
|
||||
// OPC UA StatusCode constants the driver surfaces for local-side faults. Upstream-server
|
||||
// StatusCodes are passed through verbatim per driver-specs.md §8 "cascading quality" —
|
||||
// downstream clients need to distinguish 'remote source down' from 'local driver failure'.
|
||||
@@ -164,6 +171,9 @@ public sealed class OpcUaClientDriver : IDriver, ITagDiscovery, IReadable, IWrit
|
||||
/// <summary>Test-only seam (#670): the most recent in-place recovery task.</summary>
|
||||
internal Task RecoveryTaskForTest => _recoveryTask;
|
||||
|
||||
/// <summary>Test seam (#676): the trailing reconcile read scheduled by the last in-place recovery.</summary>
|
||||
internal Task ReconcileTaskForTest => _reconcileTask;
|
||||
|
||||
/// <summary>Test-only seam (#670 review M1): raise the session's PublishError as the SDK publish loop does.</summary>
|
||||
/// <param name="status">The publish error status.</param>
|
||||
/// <param name="subscriptionId">The subscription id the error names (0 = none).</param>
|
||||
@@ -282,6 +292,25 @@ public sealed class OpcUaClientDriver : IDriver, ITagDiscovery, IReadable, IWrit
|
||||
/// <summary>The last in-place recovery started (#670). Test seam: lets a test await it deterministically.</summary>
|
||||
private Task _recoveryTask = Task.CompletedTask;
|
||||
|
||||
/// <summary>#676 — 1 once <see cref="ConnectionLost"/> has been raised for the CURRENT session (once per session);
|
||||
/// cleared when the session is released, so a re-initialised driver reports its next loss.</summary>
|
||||
private int _connectionLostRaised;
|
||||
|
||||
/// <summary>#676 — the trailing reconcile read scheduled by the last in-place recovery. Test seam.</summary>
|
||||
private Task _reconcileTask = Task.CompletedTask;
|
||||
|
||||
/// <summary>#676 — late notifications the replay guard dropped since it was armed, and the refs they were for;
|
||||
/// summarised in ONE Information line when the window disarms. Guarded by <see cref="_replayGuardLock"/>.</summary>
|
||||
private int _replayDrops;
|
||||
private readonly HashSet<string> _replayDropRefs = new(StringComparer.Ordinal);
|
||||
|
||||
/// <summary>
|
||||
/// Test seam (#676): how long after an in-place recovery the trailing reconcile read runs. Production: the
|
||||
/// operation timeout plus one keep-alive interval — by then every request that was in flight across the stall
|
||||
/// (including the Publish responses whose notifications the SDK can lose) has completed or timed out.
|
||||
/// </summary>
|
||||
internal Func<TimeSpan> PostRecoveryReconcileDelay { get; set; }
|
||||
|
||||
/// <summary>Test seam (#670 review M1): whether a subscription has stopped publishing. Production asks the SDK.</summary>
|
||||
internal Func<Subscription, bool> IsPublishingStopped { get; set; } = static s => s.Created && s.PublishingStopped;
|
||||
|
||||
@@ -883,9 +912,34 @@ public sealed class OpcUaClientDriver : IDriver, ITagDiscovery, IReadable, IWrit
|
||||
$"No endpoint at '{endpointUrl}' matches SecurityPolicy={policy} + SecurityMode={mode}. " +
|
||||
$"Server advertises: {advertised}");
|
||||
}
|
||||
// #676: connect where the operator pointed us, not where the server says it lives.
|
||||
match.EndpointUrl = RewriteEndpointUrl(match.EndpointUrl, endpointUrl);
|
||||
return match;
|
||||
}
|
||||
|
||||
/// <summary>
|
||||
/// Gitea #676 — the address to open the session on. A server reports its endpoints with ITS view of its own
|
||||
/// address; behind NAT, a port map, a container port publish or a proxy that address is unreachable from here
|
||||
/// (or bypasses the proxy). When the advertised URL's scheme matches the configured one, the configured host
|
||||
/// AND port replace the advertised ones and the advertised path is kept — the SDK's own
|
||||
/// <c>CoreClientUtils.SelectEndpoint</c> rule, which this driver's policy-aware selection bypassed. A different
|
||||
/// scheme is a different transport and is left alone; an unparseable advertised URL falls back to the
|
||||
/// configured one.
|
||||
/// </summary>
|
||||
/// <param name="advertisedUrl">The <c>EndpointUrl</c> the server returned from GetEndpoints.</param>
|
||||
/// <param name="configuredUrl">The URL the driver was configured with (the one GetEndpoints was sent to).</param>
|
||||
/// <returns>The URL to connect the session to.</returns>
|
||||
internal static string RewriteEndpointUrl(string? advertisedUrl, string configuredUrl)
|
||||
{
|
||||
if (!Uri.TryCreate(configuredUrl, UriKind.Absolute, out var configured)) return advertisedUrl ?? configuredUrl;
|
||||
if (string.IsNullOrWhiteSpace(advertisedUrl)
|
||||
|| !Uri.TryCreate(advertisedUrl, UriKind.Absolute, out var advertised))
|
||||
return configuredUrl;
|
||||
if (!string.Equals(advertised.Scheme, configured.Scheme, StringComparison.OrdinalIgnoreCase)) return advertisedUrl;
|
||||
var builder = new UriBuilder(advertised) { Host = configured.DnsSafeHost, Port = configured.Port };
|
||||
return builder.Uri.ToString();
|
||||
}
|
||||
|
||||
/// <summary>
|
||||
/// Build a <see cref="UserIdentity"/> carrying a client user-authentication
|
||||
/// certificate loaded from <see cref="OpcUaClientDriverOptions.UserCertificatePath"/>.
|
||||
@@ -986,6 +1040,8 @@ public sealed class OpcUaClientDriver : IDriver, ITagDiscovery, IReadable, IWrit
|
||||
Interlocked.Exchange(ref _sessionLost, 0);
|
||||
Interlocked.Exchange(ref _subscriptionLost, 0);
|
||||
Interlocked.Exchange(ref _publishingStoppedSinceTicks, 0);
|
||||
// #676: re-arm the definitive-loss signal for the next session.
|
||||
Interlocked.Exchange(ref _connectionLostRaised, 0);
|
||||
}
|
||||
|
||||
/// <summary>Upper bound on the best-effort wire calls a teardown makes against a possibly-dead upstream.</summary>
|
||||
@@ -1021,8 +1077,13 @@ public sealed class OpcUaClientDriver : IDriver, ITagDiscovery, IReadable, IWrit
|
||||
// previous connection's value bookkeeping applies to them.
|
||||
_lastValues.Clear();
|
||||
_lastGoodSourceTicks.Clear();
|
||||
_replayGuard.Clear();
|
||||
Interlocked.Exchange(ref _replayGuardUntilTicks, 0);
|
||||
lock (_replayGuardLock)
|
||||
{
|
||||
_replayGuard.Clear();
|
||||
Interlocked.Exchange(ref _replayGuardUntilTicks, 0);
|
||||
_replayDrops = 0;
|
||||
_replayDropRefs.Clear();
|
||||
}
|
||||
_awaitingRecovery.Clear();
|
||||
// #619 re-review: the last-told alarm states (and ack targets) deliberately SURVIVE a shutdown. A
|
||||
// ReinitializeAsync (comms-loss watchdog / Force Reconnect) is followed by the host re-subscribing the
|
||||
@@ -1766,6 +1827,13 @@ public sealed class OpcUaClientDriver : IDriver, ITagDiscovery, IReadable, IWrit
|
||||
if (IsLateReplay(fullRef, snapshot.SourceTimestampUtc, out var newest))
|
||||
{
|
||||
_diag.Record(OpcUaClientDiagnostics.StaleNotificationDropped);
|
||||
// #676: the OTel counter and the Debug line below are invisible on a default-configured node; the
|
||||
// per-recovery Information summary logged at disarm is what makes the guard observable.
|
||||
lock (_replayGuardLock)
|
||||
{
|
||||
_replayDrops++;
|
||||
_replayDropRefs.Add(fullRef);
|
||||
}
|
||||
_logger.LogDebug(
|
||||
"OpcUaClientDriver '{DriverInstanceId}': dropped a late replayed notification for {Ref} after a recovery " +
|
||||
"(source {Source:O} is not newer than {Newest:O}).", _driverInstanceId, fullRef, snapshot.SourceTimestampUtc,
|
||||
@@ -1798,14 +1866,7 @@ public sealed class OpcUaClientDriver : IDriver, ITagDiscovery, IReadable, IWrit
|
||||
if (until == 0) return false;
|
||||
if (Clock.GetUtcNow().UtcDateTime.Ticks >= until)
|
||||
{
|
||||
lock (_replayGuardLock)
|
||||
{
|
||||
if (Interlocked.Read(ref _replayGuardUntilTicks) == until)
|
||||
{
|
||||
Interlocked.Exchange(ref _replayGuardUntilTicks, 0);
|
||||
_replayGuard.Clear();
|
||||
}
|
||||
}
|
||||
DisarmReplayGuard(until);
|
||||
return false;
|
||||
}
|
||||
if (source is not { } src) return false;
|
||||
@@ -1821,11 +1882,36 @@ public sealed class OpcUaClientDriver : IDriver, ITagDiscovery, IReadable, IWrit
|
||||
}
|
||||
}
|
||||
|
||||
/// <summary>
|
||||
/// Expire the replay guard armed until <paramref name="until"/> — a no-op when it was re-armed or already disarmed
|
||||
/// since — and log ONE Information summary of what it dropped (#676). The guard's OTel counter and per-drop Debug
|
||||
/// line are invisible on a default-configured node, so before this a recovery's drops left no trace at all.
|
||||
/// </summary>
|
||||
/// <param name="until">The expiry the caller observed; only that arming is disarmed.</param>
|
||||
private void DisarmReplayGuard(long until)
|
||||
{
|
||||
int drops, refs;
|
||||
lock (_replayGuardLock)
|
||||
{
|
||||
if (Interlocked.Read(ref _replayGuardUntilTicks) != until) return;
|
||||
Interlocked.Exchange(ref _replayGuardUntilTicks, 0);
|
||||
_replayGuard.Clear();
|
||||
drops = _replayDrops;
|
||||
refs = _replayDropRefs.Count;
|
||||
_replayDrops = 0;
|
||||
_replayDropRefs.Clear();
|
||||
}
|
||||
_logger.LogInformation(
|
||||
"OpcUaClientDriver '{DriverInstanceId}': post-recovery replay window closed — dropped {Drops} late " +
|
||||
"notifications across {Refs} refs after recovery.", _driverInstanceId, drops, refs);
|
||||
}
|
||||
|
||||
/// <summary>
|
||||
/// #670 F2 — arm the replay guard on a same-session recovery: every ref with a known Good upstream source time,
|
||||
/// for max(30 s, 2 × the longest tracked subscription keep-alive window).
|
||||
/// </summary>
|
||||
private void ArmReplayGuard(DateTime now)
|
||||
/// <returns>The window's expiry in clock ticks.</returns>
|
||||
private long ArmReplayGuard(DateTime now)
|
||||
{
|
||||
var window = ReplayGuardMinimum;
|
||||
foreach (var sub in _subscriptions.Values.Select(r => r.Subscription))
|
||||
@@ -1839,6 +1925,25 @@ public sealed class OpcUaClientDriver : IDriver, ITagDiscovery, IReadable, IWrit
|
||||
foreach (var kv in _lastGoodSourceTicks) _replayGuard[kv.Key] = kv.Value;
|
||||
Interlocked.Exchange(ref _replayGuardUntilTicks, (now + window).Ticks);
|
||||
}
|
||||
return (now + window).Ticks;
|
||||
}
|
||||
|
||||
/// <summary>
|
||||
/// #676 — disarm the replay guard (and log its summary) when its window ends, even if no notification arrives to
|
||||
/// disarm it lazily in <see cref="IsLateReplay"/> — a quiet subscription would otherwise never log the summary.
|
||||
/// </summary>
|
||||
private async Task DisarmReplayGuardWhenDueAsync(long until)
|
||||
{
|
||||
try
|
||||
{
|
||||
var wait = new DateTime(until, DateTimeKind.Utc) - Clock.GetUtcNow().UtcDateTime;
|
||||
if (wait > TimeSpan.Zero) await Task.Delay(wait + TimeSpan.FromMilliseconds(100)).ConfigureAwait(false);
|
||||
if (Clock.GetUtcNow().UtcDateTime.Ticks >= until) DisarmReplayGuard(until);
|
||||
}
|
||||
catch (Exception ex)
|
||||
{
|
||||
_logger.LogDebug(ex, "OpcUaClientDriver '{DriverInstanceId}': replay-guard disarm timer faulted.", _driverInstanceId);
|
||||
}
|
||||
}
|
||||
|
||||
/// <summary>
|
||||
@@ -2683,7 +2788,9 @@ public sealed class OpcUaClientDriver : IDriver, ITagDiscovery, IReadable, IWrit
|
||||
/// session-recreate path cloned subscriptions the driver never re-tracked, and it kept health Healthy while
|
||||
/// it did so — the #670 symptom. A session that does not come back keeps health Degraded with the read stamp
|
||||
/// frozen, which is exactly what the host's #527 comms-loss watchdog trips on: ShutdownAsync + InitializeAsync
|
||||
/// + re-subscribe, whose initial values come back Good.
|
||||
/// + re-subscribe, whose initial values come back Good. When the keep-alive status proves the session is gone
|
||||
/// for good (<see cref="IsDefinitiveSessionLoss"/>) the driver also raises <see cref="ConnectionLost"/> (#676),
|
||||
/// so the host runs that sequence at once instead of after the watchdog's silence window.
|
||||
/// </remarks>
|
||||
private void OnKeepAlive(ISession sender, KeepAliveEventArgs e)
|
||||
{
|
||||
@@ -2706,12 +2813,15 @@ public sealed class OpcUaClientDriver : IDriver, ITagDiscovery, IReadable, IWrit
|
||||
UpdateHealth(_ => new DriverHealth(DriverState.Healthy, now, null));
|
||||
// A fresh grace: every subscription reports stopped right after an outage until its next message.
|
||||
Interlocked.Exchange(ref _publishingStoppedSinceTicks, 0);
|
||||
ArmReplayGuard(now);
|
||||
var guardUntil = ArmReplayGuard(now);
|
||||
_diag.Record(OpcUaClientDiagnostics.KeepAliveRecovered);
|
||||
_logger.LogInformation(
|
||||
"OpcUaClientDriver '{DriverInstanceId}': upstream keep-alive recovered on the same session; " +
|
||||
"re-reading the refs published Bad during the outage.", _driverInstanceId);
|
||||
_recoveryTask = Task.Run(() => RecoverAfterOutageAsync(sender));
|
||||
var recovery = Task.Run(() => RecoverAfterOutageAsync(sender));
|
||||
_recoveryTask = recovery;
|
||||
_reconcileTask = ReconcileAfterRecoveryAsync(sender, recovery, PostRecoveryReconcileDelay());
|
||||
_ = DisarmReplayGuardWhenDueAsync(guardUntil);
|
||||
return;
|
||||
}
|
||||
|
||||
@@ -2729,14 +2839,56 @@ public sealed class OpcUaClientDriver : IDriver, ITagDiscovery, IReadable, IWrit
|
||||
TransitionTo(HostState.Stopped);
|
||||
_diag.Record(OpcUaClientDiagnostics.KeepAliveMiss);
|
||||
UpdateHealth(h => new DriverHealth(DriverState.Degraded, h.LastSuccessfulRead, $"keep-alive: {e.Status}"));
|
||||
if (Interlocked.Exchange(ref _sessionLost, 1) == 1) return;
|
||||
if (Volatile.Read(ref _subscriptionLost) == 1) return; // already published Bad for this connection
|
||||
// #676: the first bad keep-alive is often ambiguous and a definitive one follows, so this is checked on EVERY
|
||||
// bad keep-alive — but only after the outage below has been published, so the Bad reaches subscribers first.
|
||||
var keepAliveCode = e.Status?.StatusCode ?? StatusCodes.Good;
|
||||
var definitive = IsDefinitiveSessionLoss(keepAliveCode);
|
||||
// A subscription loss already published Bad for this connection.
|
||||
if (Interlocked.Exchange(ref _sessionLost, 1) == 0 && Volatile.Read(ref _subscriptionLost) == 0)
|
||||
{
|
||||
_logger.LogWarning(
|
||||
"OpcUaClientDriver '{DriverInstanceId}': upstream session keep-alive failed ({Status}); subscribed values " +
|
||||
"are BadNoCommunication until it recovers or the host's comms-loss watchdog reconnects the driver.",
|
||||
_driverInstanceId, e.Status);
|
||||
PublishCommsLoss(now);
|
||||
}
|
||||
if (definitive)
|
||||
RaiseConnectionLost($"upstream session keep-alive reported {StatusCodes.GetBrowseName(keepAliveCode.Code)}");
|
||||
}
|
||||
|
||||
/// <summary>
|
||||
/// #676 — keep-alive statuses that prove the session can NEVER recover in place, so waiting out the #527
|
||||
/// watchdog would only delay the inevitable re-initialise. The server forgot the session
|
||||
/// (<c>BadSessionIdInvalid</c> — what a re-opened channel to a restarted server answers), closed it
|
||||
/// (<c>BadSessionClosed</c>) or never activated it (<c>BadSessionNotActivated</c>); or the server HALTED
|
||||
/// (<c>BadServerHalted</c>) — measured on the #676 restart wire test, the SDK never re-opens a channel the
|
||||
/// server halted: 15 s after the server was back the same session still failed every request with
|
||||
/// <c>BadServerHalted</c>, so a halted session is dead for good. Everything else — <c>BadNoCommunication</c>,
|
||||
/// <c>BadConnectionClosed</c>, <c>BadNotConnected</c>, request timeouts — is AMBIGUOUS (a stalled link that
|
||||
/// resumes keeps its session, see the stall wire test) and stays with the watchdog.
|
||||
/// </summary>
|
||||
/// <param name="status">A keep-alive status.</param>
|
||||
/// <returns>True when the session is definitively gone.</returns>
|
||||
internal static bool IsDefinitiveSessionLoss(StatusCode status) =>
|
||||
status == StatusCodes.BadSessionIdInvalid
|
||||
|| status == StatusCodes.BadSessionClosed
|
||||
|| status == StatusCodes.BadSessionNotActivated
|
||||
|| status == StatusCodes.BadServerHalted;
|
||||
|
||||
/// <summary>#676 — raise <see cref="ConnectionLost"/> once for the current session, isolating a faulting subscriber.</summary>
|
||||
/// <param name="reason">Why the connection is definitively gone, for the host's log.</param>
|
||||
private void RaiseConnectionLost(string reason)
|
||||
{
|
||||
if (Interlocked.Exchange(ref _connectionLostRaised, 1) == 1) return;
|
||||
_logger.LogWarning(
|
||||
"OpcUaClientDriver '{DriverInstanceId}': upstream session keep-alive failed ({Status}); subscribed values " +
|
||||
"are BadNoCommunication until it recovers or the host's comms-loss watchdog reconnects the driver.",
|
||||
_driverInstanceId, e.Status);
|
||||
PublishCommsLoss(now);
|
||||
"OpcUaClientDriver '{DriverInstanceId}': connection definitively lost ({Reason}); asking the host to " +
|
||||
"re-initialise now instead of waiting for the comms-loss watchdog.", _driverInstanceId, reason);
|
||||
try { ConnectionLost?.Invoke(this, new DriverConnectionLossEventArgs(reason)); }
|
||||
catch (Exception ex)
|
||||
{
|
||||
_logger.LogWarning(ex, "OpcUaClientDriver '{DriverInstanceId}': a ConnectionLost subscriber faulted.",
|
||||
_driverInstanceId);
|
||||
}
|
||||
}
|
||||
|
||||
/// <summary>
|
||||
@@ -2777,8 +2929,11 @@ public sealed class OpcUaClientDriver : IDriver, ITagDiscovery, IReadable, IWrit
|
||||
UpdateHealth(h => new DriverHealth(DriverState.Degraded, h.LastSuccessfulRead, $"subscription lost: {reason}"));
|
||||
_logger.LogWarning(
|
||||
"OpcUaClientDriver '{DriverInstanceId}': {Reason}; subscribed values are BadNoCommunication until the " +
|
||||
"host's comms-loss watchdog re-initialises the driver and re-subscribes.", _driverInstanceId, reason);
|
||||
"host re-initialises the driver and re-subscribes.", _driverInstanceId, reason);
|
||||
if (Volatile.Read(ref _sessionLost) == 0) PublishCommsLoss(now);
|
||||
// #676: a dead subscription never comes back on this session — only the re-subscribe after a re-initialise
|
||||
// recreates it — so this is definitive: ask the host now rather than after the watchdog's 90 s.
|
||||
RaiseConnectionLost($"subscription lost: {reason}");
|
||||
}
|
||||
|
||||
/// <summary>
|
||||
@@ -2880,6 +3035,74 @@ public sealed class OpcUaClientDriver : IDriver, ITagDiscovery, IReadable, IWrit
|
||||
}
|
||||
}
|
||||
|
||||
/// <summary>
|
||||
/// #676 — the trailing reconcile read after an in-place recovery. Found by the TCP-stall wire test: a value change
|
||||
/// the server published just after a stall ended rode a Publish response that had been in flight across the
|
||||
/// stall; the SDK timed that request out (<c>BadTimeout</c>), discarded the response, and never republished the
|
||||
/// message (the following keep-alives advanced the sequence number past it). The node stayed Good on the value
|
||||
/// from the recovery read — stale, indefinitely, for a value that does not change again. Once every request that
|
||||
/// was in flight across the stall has completed or timed out (<see cref="PostRecoveryReconcileDelay"/>), every
|
||||
/// subscribed ref is read once more and any Good value NEWER than the last one accepted for that ref is published
|
||||
/// (through the replay guard's mark while its window is open, so it can never regress a node).
|
||||
/// </summary>
|
||||
/// <param name="session">The session that recovered; nothing happens if it is no longer current or is in outage.</param>
|
||||
/// <param name="recovery">The recovery read, which runs first so this read is compared against its result.</param>
|
||||
/// <param name="delay">How long to wait before reading.</param>
|
||||
private async Task ReconcileAfterRecoveryAsync(ISession session, Task recovery, TimeSpan delay)
|
||||
{
|
||||
bool Current() => ReferenceEquals(session, Session)
|
||||
&& Volatile.Read(ref _sessionLost) == 0
|
||||
&& Volatile.Read(ref _subscriptionLost) == 0;
|
||||
try
|
||||
{
|
||||
if (delay > TimeSpan.Zero) await Task.Delay(delay).ConfigureAwait(false);
|
||||
await recovery.ConfigureAwait(false);
|
||||
if (!Current()) return;
|
||||
var refs = _subscriptions.Values
|
||||
.SelectMany(rs => rs.ItemHandlers.Select(p => RefOf(p.Item)))
|
||||
.Distinct(StringComparer.Ordinal)
|
||||
.ToList();
|
||||
if (refs.Count == 0) return;
|
||||
var (results, transportOk) = await ReadCoreAsync(refs, CancellationToken.None, session).ConfigureAwait(false);
|
||||
if (!transportOk) return; // a new outage — the keep-alive reports it
|
||||
var published = 0;
|
||||
for (var i = 0; i < refs.Count; i++)
|
||||
{
|
||||
if (!Current()) return;
|
||||
var r = results[i];
|
||||
if (!StatusCode.IsGood(r.StatusCode) || r.SourceTimestampUtc is not { } src) continue;
|
||||
if (!IsNewerThanAccepted(refs[i], src)) continue;
|
||||
RecordUpstreamGood(refs[i], r);
|
||||
_lastValues[refs[i]] = r;
|
||||
_awaitingRecovery.TryRemove(refs[i], out _);
|
||||
foreach (var rs in _subscriptions.Values)
|
||||
if (rs.ItemHandlers.Any(p => RefOf(p.Item) == refs[i]))
|
||||
RaiseDataChange(new DataChangeEventArgs(rs.Handle, refs[i], r));
|
||||
published++;
|
||||
}
|
||||
if (published > 0)
|
||||
_logger.LogInformation(
|
||||
"OpcUaClientDriver '{DriverInstanceId}': trailing re-read after recovery found {Count} of {Total} refs " +
|
||||
"whose latest change never arrived through the subscription; published them.",
|
||||
_driverInstanceId, published, refs.Count);
|
||||
}
|
||||
catch (Exception ex)
|
||||
{
|
||||
_logger.LogWarning(ex, "OpcUaClientDriver '{DriverInstanceId}': trailing re-read after a recovery failed.",
|
||||
_driverInstanceId);
|
||||
}
|
||||
}
|
||||
|
||||
/// <summary>#676 — whether a Good upstream value with source time <paramref name="source"/> is newer than the last one
|
||||
/// accepted for <paramref name="fullRef"/>. Inside the replay window this IS the guard's check (and advances its mark);
|
||||
/// outside it, a strict comparison against the last accepted Good source time.</summary>
|
||||
private bool IsNewerThanAccepted(string fullRef, DateTime source)
|
||||
{
|
||||
var until = Interlocked.Read(ref _replayGuardUntilTicks);
|
||||
if (until != 0 && Clock.GetUtcNow().UtcDateTime.Ticks < until) return !IsLateReplay(fullRef, source, out _);
|
||||
return !_lastGoodSourceTicks.TryGetValue(fullRef, out var last) || source.Ticks > last;
|
||||
}
|
||||
|
||||
/// <summary>Quality-only annotation (#626 pattern) of every subscribed alarm condition.</summary>
|
||||
private void AnnotateAlarmQuality(uint quality, DateTime now)
|
||||
{
|
||||
|
||||
-8
@@ -53,11 +53,6 @@
|
||||
<InputNumber @bind-Value="_form.OpcUa.KeepAliveIntervalSeconds" @bind-Value:after="EmitAsync" class="form-control form-control-sm" />
|
||||
<div class="form-text">Default 5 s.</div>
|
||||
</div>
|
||||
<div class="col-md-3">
|
||||
<label class="form-label">Reconnect period (s)</label>
|
||||
<InputNumber @bind-Value="_form.OpcUa.ReconnectPeriodSeconds" @bind-Value:after="EmitAsync" class="form-control form-control-sm" />
|
||||
<div class="form-text">Initial delay after session drop. Default 5 s.</div>
|
||||
</div>
|
||||
<div class="col-md-3">
|
||||
<label class="form-label">Max discovered nodes</label>
|
||||
<InputNumber @bind-Value="_form.OpcUa.MaxDiscoveredNodes" @bind-Value:after="EmitAsync" class="form-control form-control-sm" />
|
||||
@@ -330,7 +325,6 @@
|
||||
public int TimeoutSeconds { get; set; } = 10;
|
||||
public int SessionTimeoutSeconds { get; set; } = 120;
|
||||
public int KeepAliveIntervalSeconds { get; set; } = 5;
|
||||
public int ReconnectPeriodSeconds { get; set; } = 5;
|
||||
public int MaxDiscoveredNodes { get; set; } = 10_000;
|
||||
public int MaxBrowseDepth { get; set; } = 10;
|
||||
|
||||
@@ -370,7 +364,6 @@
|
||||
TimeoutSeconds = (int)r.Timeout.TotalSeconds,
|
||||
SessionTimeoutSeconds = (int)r.SessionTimeout.TotalSeconds,
|
||||
KeepAliveIntervalSeconds = (int)r.KeepAliveInterval.TotalSeconds,
|
||||
ReconnectPeriodSeconds = (int)r.ReconnectPeriod.TotalSeconds,
|
||||
MaxDiscoveredNodes = r.MaxDiscoveredNodes,
|
||||
MaxBrowseDepth = r.MaxBrowseDepth,
|
||||
SecurityMode = r.SecurityMode,
|
||||
@@ -404,7 +397,6 @@
|
||||
Timeout = TimeSpan.FromSeconds(TimeoutSeconds),
|
||||
SessionTimeout = TimeSpan.FromSeconds(SessionTimeoutSeconds),
|
||||
KeepAliveInterval = TimeSpan.FromSeconds(KeepAliveIntervalSeconds),
|
||||
ReconnectPeriod = TimeSpan.FromSeconds(ReconnectPeriodSeconds),
|
||||
MaxDiscoveredNodes = MaxDiscoveredNodes,
|
||||
MaxBrowseDepth = MaxBrowseDepth,
|
||||
SecurityMode = SecurityMode,
|
||||
|
||||
@@ -153,6 +153,11 @@ public sealed class DriverInstanceActor : ReceiveActor, IWithTimers
|
||||
/// behaviour for the same reason as <see cref="RediscoveryRaised"/> — a probe tick can land while the
|
||||
/// driver is between connects.</summary>
|
||||
private sealed record HostStatusRaised;
|
||||
/// <summary>Self-sent when the wrapped driver raises <see cref="IDriverConnectionLossSource.ConnectionLost"/> (#676)
|
||||
/// — it KNOWS its connection is gone for good. Marshals the event off the driver's thread. Acted on only in
|
||||
/// Connected (it becomes a disconnect at once, instead of after the #527 watchdog's silence window); every other
|
||||
/// behaviour is already reconnecting or connecting and ignores it.</summary>
|
||||
private sealed record ConnectionLossRaised(DriverConnectionLossEventArgs Args);
|
||||
|
||||
public sealed class RetryConnect
|
||||
{
|
||||
@@ -233,6 +238,7 @@ public sealed class DriverInstanceActor : ReceiveActor, IWithTimers
|
||||
private EventHandler<AlarmEventArgs>? _alarmEventHandler;
|
||||
private EventHandler<RediscoveryEventArgs>? _rediscoveryHandler;
|
||||
private EventHandler<HostStatusChangedEventArgs>? _hostStatusHandler;
|
||||
private EventHandler<DriverConnectionLossEventArgs>? _connectionLossHandler;
|
||||
|
||||
/// <summary>When the driver last raised <see cref="IRediscoverable.OnRediscoveryNeeded"/>, and the reason
|
||||
/// it gave. Null until the first raise. Carried on every subsequent health snapshot so the AdminUI can
|
||||
@@ -400,6 +406,7 @@ public sealed class DriverInstanceActor : ReceiveActor, IWithTimers
|
||||
// has no connection affinity, and a driver can observe a remote change while disconnected.
|
||||
AttachRediscoverySource();
|
||||
AttachHostStatusSource();
|
||||
AttachConnectionLossSource();
|
||||
PublishHealthSnapshot();
|
||||
Timers.StartPeriodicTimer("health-poll", HealthPollTick.Instance, _healthPollInterval);
|
||||
}
|
||||
@@ -427,6 +434,7 @@ public sealed class DriverInstanceActor : ReceiveActor, IWithTimers
|
||||
// Stubbed drivers have no upstream alarm system — swallow the ack (it's fire-and-forget, no reply).
|
||||
Receive<RouteAlarmAck>(_ => { /* stubbed drivers have no alarm backend */ });
|
||||
Receive<DisconnectObserved>(_ => { /* stubbed drivers don't disconnect */ });
|
||||
Receive<ConnectionLossRaised>(IgnoreConnectionLoss);
|
||||
Receive<ForceReconnect>(_ => { /* stubbed drivers don't reconnect */ });
|
||||
Receive<SetDesiredSubscriptions>(StoreDesiredSubscriptions);
|
||||
// Stubbed drivers never enter Connected, so they never kick discovery; swallow defensively in case a
|
||||
@@ -468,6 +476,7 @@ public sealed class DriverInstanceActor : ReceiveActor, IWithTimers
|
||||
});
|
||||
Receive<SetDesiredSubscriptions>(StoreDesiredSubscriptions);
|
||||
Receive<ForceReconnect>(_ => { /* already connecting — no-op */ });
|
||||
Receive<ConnectionLossRaised>(IgnoreConnectionLoss);
|
||||
// ResubscribeDesired self-Tells Subscribe; HandleSubscribeAsync replies SubscriptionEstablished to the
|
||||
// sender, which on the self-resubscribe path is Self. Swallow it (trace only) so it doesn't dead-letter.
|
||||
Receive<SubscriptionEstablished>(msg =>
|
||||
@@ -500,15 +509,12 @@ public sealed class DriverInstanceActor : ReceiveActor, IWithTimers
|
||||
// reconnects but never manages a read is measured from THIS connect, not from a stale earlier one.
|
||||
_connectedSinceUtc = DateTime.UtcNow;
|
||||
|
||||
Receive<DisconnectObserved>(msg =>
|
||||
{
|
||||
_log.Warning("DriverInstance {Id}: disconnect observed ({Reason}); reconnecting",
|
||||
_driverInstanceId, msg.Reason);
|
||||
DetachSubscription();
|
||||
RecordFault();
|
||||
Become(Reconnecting);
|
||||
PublishHealthSnapshot();
|
||||
});
|
||||
Receive<DisconnectObserved>(msg => HandleDisconnectObserved(msg.Reason));
|
||||
// #676 — the driver KNOWS its connection is gone (e.g. OpcUaClient: the upstream server halted or forgot the
|
||||
// session). Same handling as the watchdog's disconnect, minus the ~90 s of silence it would need to prove it.
|
||||
// Handled inline rather than re-told as DisconnectObserved, so it cannot land in Reconnecting as an unhandled
|
||||
// message.
|
||||
Receive<ConnectionLossRaised>(msg => HandleDisconnectObserved($"driver reported connection lost: {msg.Args.Reason}"));
|
||||
Receive<ForceReconnect>(_ =>
|
||||
{
|
||||
_log.Info("DriverInstance {Id}: ForceReconnect requested by admin; re-entering Reconnecting", _driverInstanceId);
|
||||
@@ -764,6 +770,7 @@ public sealed class DriverInstanceActor : ReceiveActor, IWithTimers
|
||||
Receive<InitializeFailed>(_ => { /* keep retrying via timer */ });
|
||||
Receive<SetDesiredSubscriptions>(StoreDesiredSubscriptions);
|
||||
Receive<ForceReconnect>(_ => { /* already reconnecting — no-op */ });
|
||||
Receive<ConnectionLossRaised>(IgnoreConnectionLoss);
|
||||
// ResubscribeDesired self-Tells Subscribe; HandleSubscribeAsync replies SubscriptionEstablished to the
|
||||
// sender, which on the self-resubscribe path is Self. Swallow it (trace only) so it doesn't dead-letter.
|
||||
Receive<SubscriptionEstablished>(msg =>
|
||||
@@ -1105,6 +1112,50 @@ public sealed class DriverInstanceActor : ReceiveActor, IWithTimers
|
||||
/// one), marshaling each transition to the actor thread. Idempotent; mirrors
|
||||
/// <see cref="AttachRediscoverySource"/>, including the PreStart-not-per-connect placement — a probe
|
||||
/// loop can report a host down while the driver itself is between connects.</summary>
|
||||
/// <summary>
|
||||
/// Subscribe the driver's <see cref="IDriverConnectionLossSource.ConnectionLost"/> (#676), if it is one,
|
||||
/// marshalling each raise to the actor thread — actor state is never touched on the driver's thread. Attached
|
||||
/// once in <c>PreStart</c> and detached in <c>PostStop</c>, like <see cref="AttachRediscoverySource"/>: the
|
||||
/// <see cref="IDriver"/> instance can outlive this actor, so a per-connect attach would leak a handler (holding
|
||||
/// a dead <c>Self</c>) per respawn.
|
||||
/// </summary>
|
||||
private void AttachConnectionLossSource()
|
||||
{
|
||||
if (_driver is not IDriverConnectionLossSource src || _connectionLossHandler is not null) return;
|
||||
var self = Self;
|
||||
_connectionLossHandler = (_, e) => self.Tell(new ConnectionLossRaised(e));
|
||||
src.ConnectionLost += _connectionLossHandler;
|
||||
}
|
||||
|
||||
/// <summary>Symmetric teardown, called from PostStop — same leak argument as <see cref="DetachRediscoverySource"/>.</summary>
|
||||
private void DetachConnectionLossSource()
|
||||
{
|
||||
if (_driver is IDriverConnectionLossSource src && _connectionLossHandler is not null)
|
||||
src.ConnectionLost -= _connectionLossHandler;
|
||||
_connectionLossHandler = null;
|
||||
}
|
||||
|
||||
/// <summary>
|
||||
/// A connection loss reported while NOT Connected (#676): a (re)initialise is already pending or running, so
|
||||
/// there is nothing to tear down — and acting on it could tear down the connection that attempt is building.
|
||||
/// </summary>
|
||||
private void IgnoreConnectionLoss(ConnectionLossRaised msg) =>
|
||||
_log.Debug("DriverInstance {Id}: driver reported connection lost ({Reason}) while not connected — ignored",
|
||||
_driverInstanceId, msg.Args.Reason);
|
||||
|
||||
/// <summary>
|
||||
/// Connected → Reconnecting on an observed disconnect — from the #527 watchdog or a driver's definitive
|
||||
/// <see cref="IDriverConnectionLossSource.ConnectionLost"/> (#676).
|
||||
/// </summary>
|
||||
private void HandleDisconnectObserved(string reason)
|
||||
{
|
||||
_log.Warning("DriverInstance {Id}: disconnect observed ({Reason}); reconnecting", _driverInstanceId, reason);
|
||||
DetachSubscription();
|
||||
RecordFault();
|
||||
Become(Reconnecting);
|
||||
PublishHealthSnapshot();
|
||||
}
|
||||
|
||||
private void AttachHostStatusSource()
|
||||
{
|
||||
if (_driver is not IHostConnectivityProbe src || _hostStatusHandler is not null) return;
|
||||
@@ -1497,6 +1548,7 @@ public sealed class DriverInstanceActor : ReceiveActor, IWithTimers
|
||||
// same driver object), so a missing unsubscribe accumulates a handler per respawn holding a dead Self.
|
||||
DetachRediscoverySource();
|
||||
DetachHostStatusSource();
|
||||
DetachConnectionLossSource();
|
||||
try { _driver.ShutdownAsync(CancellationToken.None).GetAwaiter().GetResult(); }
|
||||
catch (Exception ex) { _log.Warning(ex, "DriverInstance {Id}: ShutdownAsync threw on PostStop", _driverInstanceId); }
|
||||
OtOpcUaTelemetry.DriverInstanceLifecycle.Add(1,
|
||||
|
||||
+13
@@ -137,4 +137,17 @@ public sealed class OpcUaClientDriverBrowserTests
|
||||
sut.LastUsedUtc.ShouldBeGreaterThan(before,
|
||||
"AttributesAsync must refresh LastUsedUtc to satisfy the IBrowseSession contract");
|
||||
}
|
||||
|
||||
/// <summary>
|
||||
/// #676: a config still carrying the deleted <c>reconnectPeriod</c> key must deserialise — the browser's own
|
||||
/// validation (here: Certificate auth refused) is what fires, not a JSON error.
|
||||
/// </summary>
|
||||
[Fact]
|
||||
public async Task OpenAsync_with_a_legacy_reconnectPeriod_key_still_parses()
|
||||
{
|
||||
var json = """{"EndpointUrl":"opc.tcp://127.0.0.1:1","reconnectPeriod":"00:00:05","AuthType":"Certificate"}""";
|
||||
var ex = await Should.ThrowAsync<InvalidOperationException>(
|
||||
() => _sut.OpenAsync(json, TestContext.Current.CancellationToken));
|
||||
ex.Message.ShouldContain("Certificate");
|
||||
}
|
||||
}
|
||||
|
||||
+408
@@ -0,0 +1,408 @@
|
||||
using System.Text.Json;
|
||||
using Microsoft.Extensions.Logging;
|
||||
using Moq;
|
||||
using Opc.Ua;
|
||||
using Opc.Ua.Client;
|
||||
using Shouldly;
|
||||
using Xunit;
|
||||
using ZB.MOM.WW.OtOpcUa.Core.Abstractions;
|
||||
|
||||
namespace ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests;
|
||||
|
||||
/// <summary>
|
||||
/// Gitea #676 — the driver half of the fast recovery path (<see cref="IDriverConnectionLossSource"/>), the
|
||||
/// per-recovery replay-drop summary, and the trailing reconcile read after an in-place recovery.
|
||||
/// </summary>
|
||||
[Trait("Category", "Unit")]
|
||||
public sealed class OpcUaClientConnectionLossSignalTests
|
||||
{
|
||||
private const uint BadNoCommunication = 0x80310000u;
|
||||
private const string SpeedRef = "Plant/dev/Speed";
|
||||
private const string CounterRef = "Plant/dev/Counter";
|
||||
|
||||
private sealed class ManualClock(DateTimeOffset start) : TimeProvider
|
||||
{
|
||||
public DateTimeOffset Now { get; set; } = start;
|
||||
public override DateTimeOffset GetUtcNow() => Now;
|
||||
public void Advance(TimeSpan by) => Now += by;
|
||||
}
|
||||
|
||||
private sealed class ListLogger : ILogger<OpcUaClientDriver>
|
||||
{
|
||||
public List<(LogLevel Level, string Message)> Entries { get; } = [];
|
||||
public IDisposable? BeginScope<TState>(TState state) where TState : notnull => null;
|
||||
public bool IsEnabled(LogLevel logLevel) => true;
|
||||
public void Log<TState>(LogLevel logLevel, EventId eventId, TState state, Exception? exception,
|
||||
Func<TState, Exception?, string> formatter)
|
||||
{
|
||||
lock (Entries) Entries.Add((logLevel, formatter(state, exception)));
|
||||
}
|
||||
|
||||
public string[] Info(string contains)
|
||||
{
|
||||
lock (Entries)
|
||||
return [.. Entries.Where(e => e.Level == LogLevel.Information && e.Message.Contains(contains)).Select(e => e.Message)];
|
||||
}
|
||||
}
|
||||
|
||||
private static RawTagEntry Tag(string rawPath, string nodeId) =>
|
||||
new(rawPath, JsonSerializer.Serialize(new { nodeId }), WriteIdempotent: true);
|
||||
|
||||
private static readonly IReadOnlyList<RawTagEntry> Tags =
|
||||
[
|
||||
Tag(SpeedRef, "ns=0;s=Speed"),
|
||||
Tag(CounterRef, "ns=0;s=Counter"),
|
||||
];
|
||||
|
||||
private static Mock<ISession> NewSession()
|
||||
{
|
||||
var mock = new Mock<ISession>(MockBehavior.Loose);
|
||||
mock.SetupGet(s => s.MessageContext).Returns(new ServiceMessageContext(SdkTelemetry.Context));
|
||||
mock.SetupGet(s => s.NamespaceUris).Returns(new NamespaceTable());
|
||||
return mock;
|
||||
}
|
||||
|
||||
private static (OpcUaClientDriver Driver, Mock<ISession> Session, ManualClock Clock, ListLogger Log) NewConnectedDriver()
|
||||
{
|
||||
var log = new ListLogger();
|
||||
var drv = new OpcUaClientDriver(new OpcUaClientDriverOptions { RawTags = Tags }, "opcua-676", log);
|
||||
var session = NewSession();
|
||||
var clock = new ManualClock(new DateTimeOffset(2026, 10, 11, 12, 0, 0, TimeSpan.Zero));
|
||||
drv.Clock = clock;
|
||||
drv.SetSessionForTest(session.Object);
|
||||
drv.SetNamespaceMapForTest(NamespaceMap.FromTable(new NamespaceTable(), Tags));
|
||||
drv.SetHealthForTest(new DriverHealth(DriverState.Healthy, clock.Now.UtcDateTime, null));
|
||||
return (drv, session, clock, log);
|
||||
}
|
||||
|
||||
private static DataValue Good(object value, DateTime ts) => new(new Variant(value), StatusCodes.Good, ts, ts);
|
||||
|
||||
/// <summary>Every read returns <paramref name="values"/> (one per requested node, in order) at <paramref name="at"/>.</summary>
|
||||
private static void SetupRead(Mock<ISession> session, Func<DateTime> at, params object[] values) =>
|
||||
session.Setup(s => s.ReadAsync(
|
||||
It.IsAny<RequestHeader>(), It.IsAny<double>(), It.IsAny<TimestampsToReturn>(),
|
||||
It.IsAny<ReadValueIdCollection>(), It.IsAny<CancellationToken>()))
|
||||
.ReturnsAsync((RequestHeader _, double _, TimestampsToReturn _, ReadValueIdCollection nodes, CancellationToken _) =>
|
||||
new ReadResponse
|
||||
{
|
||||
ResponseHeader = new ResponseHeader(),
|
||||
Results = [.. nodes.Select((_, i) => Good(values[i], at()))],
|
||||
DiagnosticInfos = [],
|
||||
});
|
||||
|
||||
// ── IDriverConnectionLossSource ──────────────────────────────────────────────────────────────────────────────
|
||||
|
||||
public static TheoryData<uint> DefinitiveStatuses =>
|
||||
[
|
||||
StatusCodes.BadSessionIdInvalid,
|
||||
StatusCodes.BadSessionClosed,
|
||||
StatusCodes.BadSessionNotActivated,
|
||||
StatusCodes.BadServerHalted,
|
||||
];
|
||||
|
||||
public static TheoryData<uint> AmbiguousStatuses =>
|
||||
[
|
||||
StatusCodes.BadNoCommunication,
|
||||
StatusCodes.BadConnectionClosed,
|
||||
StatusCodes.BadNotConnected,
|
||||
StatusCodes.BadRequestTimeout,
|
||||
StatusCodes.BadTimeout,
|
||||
StatusCodes.BadSecureChannelClosed,
|
||||
];
|
||||
|
||||
[Theory]
|
||||
[MemberData(nameof(DefinitiveStatuses))]
|
||||
public void A_definitive_keep_alive_raises_ConnectionLost_once_after_publishing_the_outage(uint status)
|
||||
{
|
||||
var (drv, _, _, _) = NewConnectedDriver();
|
||||
using var _ = drv;
|
||||
drv.AddSubscriptionForTest([SpeedRef]);
|
||||
var order = new List<string>();
|
||||
drv.OnDataChange += (_, e) => order.Add($"bad:{e.Snapshot.StatusCode:X8}");
|
||||
var raised = new List<DriverConnectionLossEventArgs>();
|
||||
drv.ConnectionLost += (_, e) => { raised.Add(e); order.Add("lost"); };
|
||||
|
||||
drv.RaiseKeepAliveForTest(status);
|
||||
drv.RaiseKeepAliveForTest(status);
|
||||
drv.RaiseKeepAliveForTest(StatusCodes.BadSessionIdInvalid);
|
||||
|
||||
raised.ShouldHaveSingleItem("once per session, however many definitive keep-alives follow")
|
||||
.Reason.ShouldContain(StatusCodes.GetBrowseName(status));
|
||||
order.ShouldBe([$"bad:{BadNoCommunication:X8}", "lost"], "subscribers see the Bad before the host tears down");
|
||||
}
|
||||
|
||||
[Theory]
|
||||
[MemberData(nameof(AmbiguousStatuses))]
|
||||
public void An_ambiguous_keep_alive_does_not_raise_ConnectionLost(uint status)
|
||||
{
|
||||
var (drv, _, _, _) = NewConnectedDriver();
|
||||
using var _ = drv;
|
||||
drv.AddSubscriptionForTest([SpeedRef]);
|
||||
var raised = 0;
|
||||
drv.ConnectionLost += (_, _) => raised++;
|
||||
var seen = new List<DataChangeEventArgs>();
|
||||
drv.OnDataChange += (_, e) => seen.Add(e);
|
||||
|
||||
for (var i = 0; i < 5; i++) drv.RaiseKeepAliveForTest(status);
|
||||
|
||||
// Positive control: the keep-alives WERE processed as an outage — the outage just is not definitive.
|
||||
seen.ShouldHaveSingleItem().Snapshot.StatusCode.ShouldBe(BadNoCommunication);
|
||||
drv.GetHealth().State.ShouldBe(DriverState.Degraded);
|
||||
raised.ShouldBe(0, "an ambiguous loss may yet resume in place — it belongs to the #527 watchdog");
|
||||
}
|
||||
|
||||
[Fact]
|
||||
public void An_ambiguous_outage_that_turns_definitive_raises_once()
|
||||
{
|
||||
var (drv, _, _, _) = NewConnectedDriver();
|
||||
using var _ = drv;
|
||||
var raised = 0;
|
||||
drv.ConnectionLost += (_, _) => raised++;
|
||||
|
||||
drv.RaiseKeepAliveForTest(StatusCodes.BadNoCommunication);
|
||||
raised.ShouldBe(0);
|
||||
drv.RaiseKeepAliveForTest(StatusCodes.BadServerHalted);
|
||||
drv.RaiseKeepAliveForTest(StatusCodes.BadNoCommunication);
|
||||
drv.RaiseKeepAliveForTest(StatusCodes.BadServerHalted);
|
||||
|
||||
raised.ShouldBe(1);
|
||||
}
|
||||
|
||||
[Fact]
|
||||
public async Task The_signal_is_re_armed_by_a_re_initialise()
|
||||
{
|
||||
var (drv, _, _, _) = NewConnectedDriver();
|
||||
using var _ = drv;
|
||||
var raised = 0;
|
||||
drv.ConnectionLost += (_, _) => raised++;
|
||||
drv.RaiseKeepAliveForTest(StatusCodes.BadSessionIdInvalid);
|
||||
raised.ShouldBe(1);
|
||||
|
||||
// The host's response: ShutdownAsync + InitializeAsync, i.e. a NEW session.
|
||||
await drv.ShutdownAsync(TestContext.Current.CancellationToken);
|
||||
var fresh = NewSession();
|
||||
drv.SetSessionForTest(fresh.Object);
|
||||
drv.SetNamespaceMapForTest(NamespaceMap.FromTable(new NamespaceTable(), Tags));
|
||||
drv.RaiseKeepAliveForTest(StatusCodes.BadSessionIdInvalid);
|
||||
|
||||
raised.ShouldBe(2, "the next session's definitive loss must be reported too");
|
||||
}
|
||||
|
||||
[Fact]
|
||||
public void A_definitive_keep_alive_from_a_superseded_session_is_ignored()
|
||||
{
|
||||
var (drv, _, _, _) = NewConnectedDriver();
|
||||
using var _ = drv;
|
||||
var raised = 0;
|
||||
drv.ConnectionLost += (_, _) => raised++;
|
||||
|
||||
drv.RaiseKeepAliveForTest(StatusCodes.BadSessionIdInvalid, NewSession().Object);
|
||||
|
||||
raised.ShouldBe(0);
|
||||
drv.GetHealth().State.ShouldBe(DriverState.Healthy);
|
||||
}
|
||||
|
||||
[Fact]
|
||||
public void A_subscription_the_server_dropped_raises_ConnectionLost_once()
|
||||
{
|
||||
var (drv, _, _, _) = NewConnectedDriver();
|
||||
using var _ = drv;
|
||||
drv.AddSubscriptionForTest([SpeedRef]);
|
||||
var raised = new List<DriverConnectionLossEventArgs>();
|
||||
drv.ConnectionLost += (_, e) => raised.Add(e);
|
||||
|
||||
drv.RaisePublishErrorForTest(StatusCodes.BadSubscriptionIdInvalid, subscriptionId: 4242); // not ours
|
||||
raised.ShouldBeEmpty();
|
||||
|
||||
drv.RaisePublishErrorForTest(StatusCodes.BadNoSubscription);
|
||||
drv.RaisePublishErrorForTest(StatusCodes.BadNoSubscription);
|
||||
|
||||
raised.ShouldHaveSingleItem().Reason.ShouldContain("subscription lost");
|
||||
}
|
||||
|
||||
[Fact]
|
||||
public void A_faulting_ConnectionLost_subscriber_does_not_break_the_keep_alive_path()
|
||||
{
|
||||
var (drv, _, _, _) = NewConnectedDriver();
|
||||
using var _ = drv;
|
||||
drv.ConnectionLost += (_, _) => throw new InvalidOperationException("subscriber bug");
|
||||
|
||||
Should.NotThrow(() => drv.RaiseKeepAliveForTest(StatusCodes.BadSessionClosed));
|
||||
drv.GetHealth().State.ShouldBe(DriverState.Degraded);
|
||||
}
|
||||
|
||||
// ── Replay-drop summary ──────────────────────────────────────────────────────────────────────────────────────
|
||||
|
||||
[Fact]
|
||||
public async Task The_replay_window_logs_one_Information_summary_of_its_drops_when_it_closes()
|
||||
{
|
||||
var (drv, session, clock, log) = NewConnectedDriver();
|
||||
using var _ = drv;
|
||||
drv.PostRecoveryReconcileDelay = () => TimeSpan.FromDays(1); // keep the trailing read out of this test
|
||||
var handle = drv.AddSubscriptionForTest([SpeedRef, CounterRef]);
|
||||
var t0 = clock.Now.UtcDateTime;
|
||||
drv.DeliverNotificationForTest(handle, SpeedRef, Good(1, t0.AddSeconds(5)));
|
||||
drv.DeliverNotificationForTest(handle, CounterRef, Good(2, t0.AddSeconds(5)));
|
||||
SetupRead(session, () => t0.AddSeconds(5), 1, 2);
|
||||
drv.RaiseKeepAliveForTest(StatusCodes.BadNoCommunication);
|
||||
drv.RaiseKeepAliveForTest(StatusCodes.Good);
|
||||
await drv.RecoveryTaskForTest;
|
||||
|
||||
// Three late replays across two refs, one fresh notification that is accepted.
|
||||
drv.DeliverNotificationForTest(handle, SpeedRef, Good(0, t0));
|
||||
drv.DeliverNotificationForTest(handle, SpeedRef, Good(1, t0.AddSeconds(5)));
|
||||
drv.DeliverNotificationForTest(handle, CounterRef, Good(0, t0));
|
||||
drv.DeliverNotificationForTest(handle, SpeedRef, Good(3, t0.AddSeconds(6)));
|
||||
log.Info("replay window closed").ShouldBeEmpty("the summary is logged once, when the window closes");
|
||||
|
||||
clock.Advance(TimeSpan.FromSeconds(31));
|
||||
drv.DeliverNotificationForTest(handle, SpeedRef, Good(4, t0.AddSeconds(40))); // first notification after expiry
|
||||
drv.DeliverNotificationForTest(handle, SpeedRef, Good(5, t0.AddSeconds(41)));
|
||||
|
||||
log.Info("replay window closed").ShouldHaveSingleItem()
|
||||
.ShouldContain("dropped 3 late notifications across 2 refs after recovery");
|
||||
}
|
||||
|
||||
[Fact]
|
||||
public async Task A_window_with_no_drops_still_reports_it_closed_and_counts_restart_per_window()
|
||||
{
|
||||
var (drv, session, clock, log) = NewConnectedDriver();
|
||||
using var _ = drv;
|
||||
drv.PostRecoveryReconcileDelay = () => TimeSpan.FromDays(1);
|
||||
var handle = drv.AddSubscriptionForTest([SpeedRef]);
|
||||
var t0 = clock.Now.UtcDateTime;
|
||||
drv.DeliverNotificationForTest(handle, SpeedRef, Good(1, t0));
|
||||
SetupRead(session, () => t0, 1);
|
||||
|
||||
drv.RaiseKeepAliveForTest(StatusCodes.BadNoCommunication);
|
||||
drv.RaiseKeepAliveForTest(StatusCodes.Good);
|
||||
await drv.RecoveryTaskForTest;
|
||||
drv.DeliverNotificationForTest(handle, SpeedRef, Good(0, t0.AddSeconds(-1))); // one drop in window 1
|
||||
clock.Advance(TimeSpan.FromSeconds(31));
|
||||
drv.DeliverNotificationForTest(handle, SpeedRef, Good(2, t0.AddSeconds(40)));
|
||||
|
||||
drv.RaiseKeepAliveForTest(StatusCodes.BadNoCommunication);
|
||||
drv.RaiseKeepAliveForTest(StatusCodes.Good);
|
||||
await drv.RecoveryTaskForTest;
|
||||
clock.Advance(TimeSpan.FromSeconds(31));
|
||||
drv.DeliverNotificationForTest(handle, SpeedRef, Good(3, t0.AddSeconds(80)));
|
||||
|
||||
log.Info("replay window closed").ShouldBe([
|
||||
"OpcUaClientDriver 'opcua-676': post-recovery replay window closed — dropped 1 late notifications across 1 refs after recovery.",
|
||||
"OpcUaClientDriver 'opcua-676': post-recovery replay window closed — dropped 0 late notifications across 0 refs after recovery.",
|
||||
]);
|
||||
}
|
||||
|
||||
// ── Trailing reconcile read ──────────────────────────────────────────────────────────────────────────────────
|
||||
|
||||
[Fact]
|
||||
public async Task The_trailing_re_read_publishes_a_change_the_subscription_lost_and_nothing_it_already_has()
|
||||
{
|
||||
var (drv, session, clock, log) = NewConnectedDriver();
|
||||
using var _ = drv;
|
||||
drv.PostRecoveryReconcileDelay = () => TimeSpan.Zero;
|
||||
var handle = drv.AddSubscriptionForTest([SpeedRef, CounterRef]);
|
||||
var t0 = clock.Now.UtcDateTime;
|
||||
drv.DeliverNotificationForTest(handle, SpeedRef, Good(10f, t0));
|
||||
drv.DeliverNotificationForTest(handle, CounterRef, Good(7, t0));
|
||||
|
||||
// The recovery read sees both unchanged; by the trailing read Speed has moved on (its notification was lost in
|
||||
// the stalled publish pipeline) while Counter has not.
|
||||
var reads = 0;
|
||||
session.Setup(s => s.ReadAsync(
|
||||
It.IsAny<RequestHeader>(), It.IsAny<double>(), It.IsAny<TimestampsToReturn>(),
|
||||
It.IsAny<ReadValueIdCollection>(), It.IsAny<CancellationToken>()))
|
||||
.ReturnsAsync(() =>
|
||||
{
|
||||
var trailing = Interlocked.Increment(ref reads) > 1;
|
||||
return new ReadResponse
|
||||
{
|
||||
ResponseHeader = new ResponseHeader(),
|
||||
Results = trailing
|
||||
? [Good(40f, t0.AddSeconds(9)), Good(7, t0)]
|
||||
: [Good(10f, t0), Good(7, t0)],
|
||||
DiagnosticInfos = [],
|
||||
};
|
||||
});
|
||||
var seen = new List<DataChangeEventArgs>();
|
||||
drv.OnDataChange += (_, e) => { lock (seen) seen.Add(e); };
|
||||
|
||||
drv.RaiseKeepAliveForTest(StatusCodes.BadNoCommunication);
|
||||
drv.RaiseKeepAliveForTest(StatusCodes.Good);
|
||||
await drv.RecoveryTaskForTest;
|
||||
await drv.ReconcileTaskForTest;
|
||||
|
||||
reads.ShouldBe(2, "the recovery read plus exactly one trailing read");
|
||||
DataChangeEventArgs[] afterRecovery;
|
||||
lock (seen) afterRecovery = [.. seen.Where(e => e.Snapshot.StatusCode == 0u)];
|
||||
// Recovery read republishes both Good (they were published Bad); the trailing read adds ONLY the lost change.
|
||||
afterRecovery.Select(e => (e.FullReference, e.Snapshot.Value))
|
||||
.ShouldBe([(SpeedRef, (object?)10f), (CounterRef, (object?)7), (SpeedRef, (object?)40f)]);
|
||||
log.Info("trailing re-read").ShouldHaveSingleItem().ShouldContain("found 1 of 2 refs");
|
||||
}
|
||||
|
||||
[Fact]
|
||||
public async Task The_trailing_re_read_never_publishes_an_older_value_than_a_notification_already_accepted()
|
||||
{
|
||||
var (drv, session, clock, _) = NewConnectedDriver();
|
||||
using var _ = drv;
|
||||
var gate = new TaskCompletionSource();
|
||||
drv.PostRecoveryReconcileDelay = () => TimeSpan.Zero;
|
||||
var handle = drv.AddSubscriptionForTest([SpeedRef]);
|
||||
var t0 = clock.Now.UtcDateTime;
|
||||
drv.DeliverNotificationForTest(handle, SpeedRef, Good(10f, t0));
|
||||
var reads = 0;
|
||||
session.Setup(s => s.ReadAsync(
|
||||
It.IsAny<RequestHeader>(), It.IsAny<double>(), It.IsAny<TimestampsToReturn>(),
|
||||
It.IsAny<ReadValueIdCollection>(), It.IsAny<CancellationToken>()))
|
||||
.Returns(async () =>
|
||||
{
|
||||
if (Interlocked.Increment(ref reads) > 1) await gate.Task; // hold the trailing read
|
||||
return new ReadResponse
|
||||
{
|
||||
ResponseHeader = new ResponseHeader(),
|
||||
Results = [Good(reads > 1 ? 20f : 10f, t0.AddSeconds(reads > 1 ? 5 : 0))],
|
||||
DiagnosticInfos = [],
|
||||
};
|
||||
});
|
||||
var seen = new List<(uint Status, object? Value)>();
|
||||
drv.OnDataChange += (_, e) => { lock (seen) seen.Add((e.Snapshot.StatusCode, e.Snapshot.Value)); };
|
||||
|
||||
drv.RaiseKeepAliveForTest(StatusCodes.BadNoCommunication);
|
||||
drv.RaiseKeepAliveForTest(StatusCodes.Good);
|
||||
await drv.RecoveryTaskForTest;
|
||||
// While the trailing read is in flight, a NEWER value arrives through the subscription.
|
||||
drv.DeliverNotificationForTest(handle, SpeedRef, Good(30f, t0.AddSeconds(8)));
|
||||
gate.SetResult();
|
||||
await drv.ReconcileTaskForTest;
|
||||
|
||||
reads.ShouldBe(2, "the trailing read must actually have run, or the absence below proves nothing");
|
||||
lock (seen)
|
||||
seen.ShouldBe([(BadNoCommunication, (object?)10f), (0u, 10f), (0u, 30f)],
|
||||
"the trailing read's 20 @ t0+5 is older than the 30 @ t0+8 already accepted, so it is not published");
|
||||
}
|
||||
|
||||
[Fact]
|
||||
public async Task The_trailing_re_read_does_nothing_if_the_session_was_replaced()
|
||||
{
|
||||
var (drv, session, clock, _) = NewConnectedDriver();
|
||||
using var _ = drv;
|
||||
drv.PostRecoveryReconcileDelay = () => TimeSpan.FromMilliseconds(300);
|
||||
var handle = drv.AddSubscriptionForTest([SpeedRef]);
|
||||
var t0 = clock.Now.UtcDateTime;
|
||||
drv.DeliverNotificationForTest(handle, SpeedRef, Good(10f, t0));
|
||||
SetupRead(session, () => t0.AddSeconds(5), 99f);
|
||||
|
||||
drv.RaiseKeepAliveForTest(StatusCodes.BadNoCommunication);
|
||||
drv.RaiseKeepAliveForTest(StatusCodes.Good);
|
||||
await drv.RecoveryTaskForTest;
|
||||
// A re-initialise lands between the recovery read and the trailing one.
|
||||
drv.SetSessionForTest(NewSession().Object);
|
||||
await drv.ReconcileTaskForTest;
|
||||
|
||||
session.Verify(s => s.ReadAsync(
|
||||
It.IsAny<RequestHeader>(), It.IsAny<double>(), It.IsAny<TimestampsToReturn>(),
|
||||
It.IsAny<ReadValueIdCollection>(), It.IsAny<CancellationToken>()), Times.Once,
|
||||
"only the recovery read — the trailing read must not run against a session that is no longer current");
|
||||
}
|
||||
}
|
||||
+19
@@ -75,4 +75,23 @@ public class OpcUaClientDriverFactoryTests
|
||||
opts.RawTags[0].WriteIdempotent.ShouldBeFalse();
|
||||
opts.RawTags[1].WriteIdempotent.ShouldBeTrue();
|
||||
}
|
||||
|
||||
/// <summary>
|
||||
/// #676 deleted the dead <c>ReconnectPeriod</c> option (unused since #670 removed the SDK reconnect handler).
|
||||
/// DriverConfig rows stored before that still carry it and must keep parsing — and the keys around it must
|
||||
/// still bind, so the unknown member is skipped rather than aborting the read.
|
||||
/// </summary>
|
||||
[Fact]
|
||||
public void A_stored_config_still_carrying_reconnectPeriod_parses()
|
||||
{
|
||||
const string legacy =
|
||||
"""{"endpointUrl":"opc.tcp://host:4840","reconnectPeriod":"00:00:05","keepAliveInterval":"00:00:07"}""";
|
||||
|
||||
var opts = OpcUaClientDriverFactoryExtensions.ParseOptions("drv-legacy", legacy);
|
||||
opts.EndpointUrl.ShouldBe("opc.tcp://host:4840");
|
||||
opts.KeepAliveInterval.ShouldBe(TimeSpan.FromSeconds(7));
|
||||
|
||||
var driver = OpcUaClientDriverFactoryExtensions.CreateInstance("drv-legacy", legacy, NullLoggerFactory.Instance);
|
||||
driver.DriverInstanceId.ShouldBe("drv-legacy");
|
||||
}
|
||||
}
|
||||
|
||||
+23
@@ -134,4 +134,27 @@ public sealed class OpcUaClientDriverProbeTests
|
||||
await acceptTask.WaitAsync(TimeSpan.FromSeconds(5), testCt);
|
||||
}
|
||||
}
|
||||
|
||||
/// <summary>
|
||||
/// #676: a stored config still carrying the deleted <c>reconnectPeriod</c> key must reach the connect phase, not
|
||||
/// fail as invalid JSON — the probe parses with the same skip-unknown-members options as the factory.
|
||||
/// </summary>
|
||||
[Fact]
|
||||
public async Task A_config_still_carrying_reconnectPeriod_is_probed_not_rejected()
|
||||
{
|
||||
var listener = new TcpListener(IPAddress.Loopback, 0);
|
||||
listener.Start();
|
||||
var port = ((IPEndPoint)listener.LocalEndpoint).Port;
|
||||
listener.Stop();
|
||||
|
||||
var result = await _probe.ProbeAsync(
|
||||
$$"""{"EndpointUrl":"opc.tcp://127.0.0.1:{{port}}","reconnectPeriod":"00:00:05"}""",
|
||||
TimeSpan.FromSeconds(5),
|
||||
TestContext.Current.CancellationToken);
|
||||
|
||||
result.Ok.ShouldBeFalse();
|
||||
var message = result.Message.ShouldNotBeNull();
|
||||
message.ShouldNotContain("invalid", Case.Insensitive);
|
||||
message.ShouldContain("Connect failed", Case.Insensitive);
|
||||
}
|
||||
}
|
||||
|
||||
-1
@@ -31,7 +31,6 @@ public sealed class OpcUaClientDriverScaffoldTests
|
||||
var opts = new OpcUaClientDriverOptions();
|
||||
opts.SessionTimeout.ShouldBe(TimeSpan.FromSeconds(120));
|
||||
opts.KeepAliveInterval.ShouldBe(TimeSpan.FromSeconds(5));
|
||||
opts.ReconnectPeriod.ShouldBe(TimeSpan.FromSeconds(5));
|
||||
}
|
||||
|
||||
/// <summary>Verifies that driver reports type and ID before connecting.</summary>
|
||||
|
||||
+53
@@ -0,0 +1,53 @@
|
||||
using Shouldly;
|
||||
using Xunit;
|
||||
|
||||
namespace ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests;
|
||||
|
||||
/// <summary>
|
||||
/// Gitea #676 — the driver connects to the endpoint URL the server ADVERTISES in GetEndpoints. A server behind NAT,
|
||||
/// a port map or a proxy advertises an address the client cannot reach (or one that bypasses the proxy), so the
|
||||
/// driver must rewrite host AND port to the configured URL when the scheme matches — what the SDK's own
|
||||
/// <c>CoreClientUtils.SelectEndpoint</c> does.
|
||||
/// </summary>
|
||||
public sealed class OpcUaClientEndpointRewriteTests
|
||||
{
|
||||
[Fact]
|
||||
public void Host_and_port_of_the_advertised_url_are_replaced_by_the_configured_ones()
|
||||
{
|
||||
OpcUaClientDriver.RewriteEndpointUrl("opc.tcp://internal-host:4840/OtOpcUa", "opc.tcp://10.1.2.3:54840/OtOpcUa")
|
||||
.ShouldBe("opc.tcp://10.1.2.3:54840/OtOpcUa");
|
||||
}
|
||||
|
||||
[Fact]
|
||||
public void The_advertised_path_is_kept()
|
||||
{
|
||||
// The path is the server's to choose (several endpoints may share a host:port); only the address is ours.
|
||||
OpcUaClientDriver.RewriteEndpointUrl("opc.tcp://plc-a:4840/Server/Ua", "opc.tcp://gateway:6000/")
|
||||
.ShouldBe("opc.tcp://gateway:6000/Server/Ua");
|
||||
}
|
||||
|
||||
[Fact]
|
||||
public void Only_the_port_differs_still_rewrites()
|
||||
{
|
||||
// The in-process stall proxy shape: same host, the configured port is the proxy's.
|
||||
OpcUaClientDriver.RewriteEndpointUrl("opc.tcp://127.0.0.1:4840/OtOpcUa", "opc.tcp://127.0.0.1:61000/OtOpcUa")
|
||||
.ShouldBe("opc.tcp://127.0.0.1:61000/OtOpcUa");
|
||||
}
|
||||
|
||||
[Fact]
|
||||
public void A_different_scheme_is_left_alone()
|
||||
{
|
||||
// An https endpoint advertised next to an opc.tcp one is a different transport, not a NAT artefact.
|
||||
OpcUaClientDriver.RewriteEndpointUrl("https://srv:443/ua", "opc.tcp://srv:4840/ua")
|
||||
.ShouldBe("https://srv:443/ua");
|
||||
}
|
||||
|
||||
[Theory]
|
||||
[InlineData(null)]
|
||||
[InlineData("")]
|
||||
[InlineData("not a url")]
|
||||
public void An_unusable_advertised_url_falls_back_to_the_configured_one(string? advertised)
|
||||
{
|
||||
OpcUaClientDriver.RewriteEndpointUrl(advertised, "opc.tcp://srv:4840/ua").ShouldBe("opc.tcp://srv:4840/ua");
|
||||
}
|
||||
}
|
||||
+5
-19
@@ -4,29 +4,15 @@ using Xunit;
|
||||
namespace ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests;
|
||||
|
||||
/// <summary>
|
||||
/// Scaffold tests for the reconnect options. Since Gitea #670 the driver has no in-driver reconnect
|
||||
/// handler (session loss is reported and the host's comms-loss watchdog re-initialises the driver);
|
||||
/// <c>ReconnectPeriod</c> is retained for config compatibility only. Outage behaviour is covered by
|
||||
/// <see cref="OpcUaClientSessionLossTests"/> and, over the wire, <c>OpcUaClientDriverReconnectWireTests</c>.
|
||||
/// Reconnect scaffolding. Since Gitea #670 the driver has no in-driver reconnect handler (session loss is reported
|
||||
/// and the host re-initialises the driver — at once on a definitive loss, #676, else via the comms-loss watchdog),
|
||||
/// and #676 deleted the dead <c>ReconnectPeriod</c> option; <see cref="OpcUaClientDriverFactoryTests"/> pins that
|
||||
/// stored configs still carrying it parse. Outage behaviour is covered by <see cref="OpcUaClientSessionLossTests"/>,
|
||||
/// <see cref="OpcUaClientConnectionLossSignalTests"/> and, over the wire, <c>OpcUaClientDriverReconnectWireTests</c>.
|
||||
/// </summary>
|
||||
[Trait("Category", "Unit")]
|
||||
public sealed class OpcUaClientReconnectTests
|
||||
{
|
||||
/// <summary>Verifies that the default reconnect period matches the driver specification of 5 seconds.</summary>
|
||||
[Fact]
|
||||
public void Default_ReconnectPeriod_matches_driver_specs_5_seconds()
|
||||
{
|
||||
new OpcUaClientDriverOptions().ReconnectPeriod.ShouldBe(TimeSpan.FromSeconds(5));
|
||||
}
|
||||
|
||||
/// <summary>Verifies that reconnect period can be configured for aggressive or relaxed retries.</summary>
|
||||
[Fact]
|
||||
public void Options_ReconnectPeriod_is_configurable_for_aggressive_or_relaxed_retry()
|
||||
{
|
||||
var opts = new OpcUaClientDriverOptions { ReconnectPeriod = TimeSpan.FromMilliseconds(500) };
|
||||
opts.ReconnectPeriod.ShouldBe(TimeSpan.FromMilliseconds(500));
|
||||
}
|
||||
|
||||
/// <summary>Verifies that the driver starts in the Unknown state before initialization.</summary>
|
||||
[Fact]
|
||||
public void Driver_starts_unknown_pre_init()
|
||||
|
||||
-4
@@ -34,7 +34,6 @@ public sealed class OpcUaClientDriverPageFormSerializationTests
|
||||
Timeout = TimeSpan.FromSeconds(20),
|
||||
SessionTimeout = TimeSpan.FromSeconds(180),
|
||||
KeepAliveInterval = TimeSpan.FromSeconds(10),
|
||||
ReconnectPeriod = TimeSpan.FromSeconds(15),
|
||||
AutoAcceptCertificates = true,
|
||||
BrowseRoot = "i=85",
|
||||
MaxDiscoveredNodes = 5000,
|
||||
@@ -58,7 +57,6 @@ public sealed class OpcUaClientDriverPageFormSerializationTests
|
||||
back.Timeout.ShouldBe(TimeSpan.FromSeconds(20));
|
||||
back.SessionTimeout.ShouldBe(TimeSpan.FromSeconds(180));
|
||||
back.KeepAliveInterval.ShouldBe(TimeSpan.FromSeconds(10));
|
||||
back.ReconnectPeriod.ShouldBe(TimeSpan.FromSeconds(15));
|
||||
back.AutoAcceptCertificates.ShouldBeTrue();
|
||||
back.BrowseRoot.ShouldBe("i=85");
|
||||
back.MaxDiscoveredNodes.ShouldBe(5000);
|
||||
@@ -105,7 +103,6 @@ public sealed class OpcUaClientDriverPageFormSerializationTests
|
||||
Timeout = TimeSpan.FromSeconds(12),
|
||||
SessionTimeout = TimeSpan.FromSeconds(150),
|
||||
KeepAliveInterval = TimeSpan.FromSeconds(7),
|
||||
ReconnectPeriod = TimeSpan.FromSeconds(8),
|
||||
AutoAcceptCertificates = true,
|
||||
BrowseRoot = "i=85",
|
||||
MaxDiscoveredNodes = 3000,
|
||||
@@ -133,7 +130,6 @@ public sealed class OpcUaClientDriverPageFormSerializationTests
|
||||
result.Timeout.ShouldBe(TimeSpan.FromSeconds(12));
|
||||
result.SessionTimeout.ShouldBe(TimeSpan.FromSeconds(150));
|
||||
result.KeepAliveInterval.ShouldBe(TimeSpan.FromSeconds(7));
|
||||
result.ReconnectPeriod.ShouldBe(TimeSpan.FromSeconds(8));
|
||||
result.AutoAcceptCertificates.ShouldBeTrue();
|
||||
result.BrowseRoot.ShouldBe("i=85");
|
||||
result.MaxDiscoveredNodes.ShouldBe(3000);
|
||||
|
||||
+17
@@ -13,6 +13,8 @@ namespace ZB.MOM.WW.OtOpcUa.OpcUaServer.IntegrationTests;
|
||||
/// comms-loss watchdog trips on). Recovery is the watchdog's sequence, replayed here as <c>DriverInstanceActor</c>
|
||||
/// runs it: ShutdownAsync, InitializeAsync, re-subscribe — after which the value comes back Good. There is no
|
||||
/// in-driver reconnect any more (#670: the SDK reconnect handler kept everything Good and Healthy forever).
|
||||
/// Since #676 a gracefully stopped server is a DEFINITIVE loss (<c>BadServerHalted</c>), so the driver also raises
|
||||
/// <c>ConnectionLost</c> and the host runs that sequence at once instead of after the watchdog's silence window.
|
||||
/// </summary>
|
||||
[Trait("Category", "Integration")]
|
||||
public sealed class OpcUaClientDriverReconnectWireTests
|
||||
@@ -39,6 +41,8 @@ public sealed class OpcUaClientDriverReconnectWireTests
|
||||
OpcUaClientDriverWireTests.Publish(rig, OpcUaClientDriverWireTests.SpeedId, 10.0f);
|
||||
|
||||
await using var drv = OpcUaClientDriverWireTests.NewDriver(rig, "wire-reconnect");
|
||||
var lost = new List<string>();
|
||||
drv.ConnectionLost += (_, e) => { lock (lost) lost.Add(e.Reason); };
|
||||
await drv.InitializeAsync("{}", ct);
|
||||
|
||||
var seen = new List<(uint Status, object? Value)>();
|
||||
@@ -67,12 +71,20 @@ public sealed class OpcUaClientDriverReconnectWireTests
|
||||
frozen.ShouldNotBeNull();
|
||||
await Task.Delay(TimeSpan.FromSeconds(3), ct); // three keep-alive intervals
|
||||
drv.GetHealth().LastSuccessfulRead.ShouldBe(frozen);
|
||||
|
||||
// #676: a server that HALTED (graceful stop) is a definitive loss — measured here, the SDK reports
|
||||
// BadServerHalted on every keep-alive and never re-opens the channel, so the session can never recover in
|
||||
// place. The driver says so at once, so the host re-initialises it instead of waiting out the ~90 s watchdog.
|
||||
await WaitAsync(() => { lock (lost) return lost.Count > 0; },
|
||||
"a halted upstream must raise ConnectionLost", TimeSpan.FromSeconds(10));
|
||||
lock (lost) lost.Single().ShouldContain("BadServerHalted");
|
||||
});
|
||||
|
||||
// The restarted server knows nothing of the old session, so the driver stays down on its own …
|
||||
await Task.Delay(TimeSpan.FromSeconds(3), ct);
|
||||
drv.GetHealth().State.ShouldNotBe(DriverState.Healthy, "nothing in the driver may paper over a dead session");
|
||||
lock (seen) seen.Count(s => s.Status == BadNoCommunication).ShouldBe(1, "one Bad per outage, not per keep-alive");
|
||||
lock (lost) lost.Count.ShouldBe(1, "once per session — the restarted server's continued refusals raise nothing more");
|
||||
|
||||
// … until the host's comms-loss watchdog re-initialises it (DriverInstanceActor: Reconnecting → ShutdownAsync +
|
||||
// InitializeAsync → Connected → re-subscribe). The new server is empty: redeploy the nodes first, holding the
|
||||
@@ -100,6 +112,7 @@ public sealed class OpcUaClientDriverReconnectWireTests
|
||||
var back = await drv.ReadAsync([OpcUaClientDriverWireTests.SpeedRef], ct);
|
||||
back[0].StatusCode.ShouldBe(0u);
|
||||
Convert.ToSingle(back[0].Value).ShouldBe(88.0f);
|
||||
lock (lost) lost.Count.ShouldBe(1, "the healthy re-initialised session reports no loss");
|
||||
}
|
||||
|
||||
/// <summary>
|
||||
@@ -117,6 +130,8 @@ public sealed class OpcUaClientDriverReconnectWireTests
|
||||
OpcUaClientDriverWireTests.Publish(rig, OpcUaClientDriverWireTests.SpeedId, 5.0f);
|
||||
|
||||
await using var drv = OpcUaClientDriverWireTests.NewDriver(rig, "wire-sublost");
|
||||
var lost = new List<string>();
|
||||
drv.ConnectionLost += (_, e) => { lock (lost) lost.Add(e.Reason); };
|
||||
await drv.InitializeAsync("{}", ct);
|
||||
var seen = new List<(uint Status, object? Value)>();
|
||||
drv.OnDataChange += (_, e) =>
|
||||
@@ -140,6 +155,8 @@ public sealed class OpcUaClientDriverReconnectWireTests
|
||||
drv.GetHealth().State.ShouldNotBe(DriverState.Healthy, "… and must not revive a driver whose data plane is dead");
|
||||
drv.GetHealth().LastSuccessfulRead.ShouldBe(frozen);
|
||||
drv.GetHostStatuses().Single().State.ShouldBe(HostState.Running, "the session itself is fine");
|
||||
// #676: a subscription the server dropped never comes back on this session — a definitive loss.
|
||||
lock (lost) lost.ShouldHaveSingleItem().ShouldContain("subscription lost");
|
||||
|
||||
// The watchdog's re-initialise recreates the subscription and the value comes back Good.
|
||||
await drv.ShutdownAsync(ct);
|
||||
|
||||
+144
@@ -0,0 +1,144 @@
|
||||
using Opc.Ua;
|
||||
using Shouldly;
|
||||
using Xunit;
|
||||
using ZB.MOM.WW.OtOpcUa.Core.Abstractions;
|
||||
|
||||
namespace ZB.MOM.WW.OtOpcUa.OpcUaServer.IntegrationTests;
|
||||
|
||||
/// <summary>
|
||||
/// Gitea #676 item 1 — the IN-PLACE blip (#670): the upstream stops answering but the TCP connection and the
|
||||
/// session survive, keep-alives fail, then traffic resumes before the session times out. Until now only the live
|
||||
/// gate (<c>docker pause</c> of opc-plc) covered it. <see cref="TcpStallProxy"/> reproduces it on loopback: the driver
|
||||
/// connects THROUGH the proxy (which works only because of the #676 endpoint rewrite — the server advertises its own
|
||||
/// port, which would bypass the proxy), and pausing the proxy stalls every byte without closing anything.
|
||||
/// </summary>
|
||||
/// <remarks>
|
||||
/// Writing this test found a real defect: a change the server published right after the stall ended rode a Publish
|
||||
/// response that had been in flight across the stall; the SDK timed that request out, dropped the response and never
|
||||
/// republished it, so the node stayed Good on the PRE-change value indefinitely. The driver's trailing reconcile read
|
||||
/// (<c>ReconcileAfterRecoveryAsync</c>) is the fix; the "40.0 arrives" leg below goes red without it.
|
||||
/// </remarks>
|
||||
[Trait("Category", "Integration")]
|
||||
public sealed class OpcUaClientDriverStallWireTests
|
||||
{
|
||||
private const uint BadNoCommunication = 0x80310000u;
|
||||
|
||||
private static async Task WaitAsync(Func<bool> condition, string because, TimeSpan? timeout = null)
|
||||
{
|
||||
var deadline = DateTime.UtcNow + (timeout ?? TimeSpan.FromSeconds(30));
|
||||
while (DateTime.UtcNow < deadline)
|
||||
{
|
||||
if (condition()) return;
|
||||
await Task.Delay(25);
|
||||
}
|
||||
condition().ShouldBeTrue(because);
|
||||
}
|
||||
|
||||
private sealed record Seen(uint Status, object? Value, DateTime? Source);
|
||||
|
||||
[Fact]
|
||||
public async Task A_stalled_connection_goes_Bad_once_and_recovers_in_place_on_the_same_session_without_regressing()
|
||||
{
|
||||
var ct = TestContext.Current.CancellationToken;
|
||||
await using var rig = await OpcUaClientDriverWireTests.StartRigAsync("drv-stall", ct);
|
||||
await using var proxy = TcpStallProxy.Start(new Uri(rig.EndpointUrl).Port);
|
||||
OpcUaClientDriverWireTests.Publish(rig, OpcUaClientDriverWireTests.SpeedId, 10.0f);
|
||||
|
||||
// A 3 s operation timeout keeps the stall short: a keep-alive is declared failed when its request times out.
|
||||
await using var drv = OpcUaClientDriverWireTests.NewDriver(
|
||||
rig, "wire-stall", endpointUrl: proxy.Through(rig.EndpointUrl), timeout: TimeSpan.FromSeconds(3));
|
||||
var connectionLost = 0;
|
||||
drv.ConnectionLost += (_, _) => Interlocked.Increment(ref connectionLost);
|
||||
await drv.InitializeAsync("{}", ct);
|
||||
proxy.AcceptedConnections.ShouldBeGreaterThan(0, "the session must run THROUGH the proxy, or pausing it proves nothing");
|
||||
|
||||
var seen = new List<Seen>();
|
||||
drv.OnDataChange += (_, e) =>
|
||||
{
|
||||
if (e.FullReference == OpcUaClientDriverWireTests.SpeedRef)
|
||||
lock (seen) seen.Add(new Seen(e.Snapshot.StatusCode, e.Snapshot.Value, e.Snapshot.SourceTimestampUtc));
|
||||
};
|
||||
await drv.SubscribeAsync([OpcUaClientDriverWireTests.SpeedRef], TimeSpan.FromMilliseconds(100), ct);
|
||||
await WaitAsync(() => { lock (seen) return seen.Any(s => s is { Status: 0u, Value: 10.0f }); }, "initial value");
|
||||
|
||||
var session = drv.Session.ShouldNotBeNull();
|
||||
var connectionsBefore = proxy.AcceptedConnections;
|
||||
var badKeepAlives = 0;
|
||||
session.KeepAlive += (_, e) =>
|
||||
{
|
||||
if (ServiceResult.IsBad(e.Status)) Interlocked.Increment(ref badKeepAlives);
|
||||
};
|
||||
// The SDK's late backlog flush: a data-carrying NotificationMessage whose sequence number is BELOW one already
|
||||
// seen (keep-alive messages carry the next number). It is the positive control for the no-regression check.
|
||||
uint maxSequence = 0;
|
||||
var lateMessages = 0;
|
||||
session.Notification += (_, e) =>
|
||||
{
|
||||
var msg = e.NotificationMessage;
|
||||
if (msg is null) return;
|
||||
lock (seen)
|
||||
{
|
||||
if (msg.SequenceNumber < maxSequence && msg.NotificationData.Count > 0) lateMessages++;
|
||||
maxSequence = Math.Max(maxSequence, msg.SequenceNumber);
|
||||
}
|
||||
};
|
||||
|
||||
// ── Stall ────────────────────────────────────────────────────────────────────────────────────────────────
|
||||
proxy.Pause();
|
||||
await WaitAsync(() => { lock (seen) return seen.Any(s => s.Status == BadNoCommunication); },
|
||||
"a stalled upstream must publish BadNoCommunication for the subscribed ref");
|
||||
lock (seen) seen.Single(s => s.Status == BadNoCommunication).Value.ShouldBe(10.0f, "the Bad retains the value");
|
||||
drv.GetHealth().State.ShouldNotBe(DriverState.Healthy);
|
||||
var frozen = drv.GetHealth().LastSuccessfulRead.ShouldNotBeNull();
|
||||
|
||||
// The server's value moves on while the client cannot see it: away and back to the pre-outage value, so the
|
||||
// recovered value is IDENTICAL to the one published Bad — the (value, status) dedup trap.
|
||||
OpcUaClientDriverWireTests.Publish(rig, OpcUaClientDriverWireTests.SpeedId, 20.0f);
|
||||
await Task.Delay(300, ct); // > one publishing interval, so the server queues 20.0 as its own notification
|
||||
OpcUaClientDriverWireTests.Publish(rig, OpcUaClientDriverWireTests.SpeedId, 10.0f);
|
||||
|
||||
// Stays Bad and frozen across a further failed keep-alive (counted, not slept for).
|
||||
var badAtDetection = Volatile.Read(ref badKeepAlives);
|
||||
await WaitAsync(() => Volatile.Read(ref badKeepAlives) >= badAtDetection + 2, "further keep-alives must fail while stalled");
|
||||
drv.GetHealth().LastSuccessfulRead.ShouldBe(frozen, "the read stamp is the #527 watchdog's silence measure");
|
||||
lock (seen) seen.Count(s => s.Status == BadNoCommunication).ShouldBe(1, "one Bad per outage, not per keep-alive");
|
||||
|
||||
// ── Resume well inside the 30 s session timeout ──────────────────────────────────────────────────────────
|
||||
proxy.Resume();
|
||||
await WaitAsync(() => drv.GetHealth().State == DriverState.Healthy, "a resumed stall must recover in place");
|
||||
int badIndex;
|
||||
lock (seen) badIndex = seen.FindIndex(s => s.Status == BadNoCommunication);
|
||||
await WaitAsync(() => { lock (seen) return seen.Skip(badIndex + 1).Any(s => s is { Status: 0u, Value: 10.0f }); },
|
||||
"the identical value must be republished Good after the outage");
|
||||
|
||||
drv.Session.ShouldBeSameAs(session, "an in-place blip must not cost the session");
|
||||
proxy.AcceptedConnections.ShouldBe(connectionsBefore, "and not the TCP connection either");
|
||||
|
||||
// A change published straight after recovery — while the Publish requests held across the stall are still
|
||||
// being answered or timed out — must still reach the node.
|
||||
OpcUaClientDriverWireTests.Publish(rig, OpcUaClientDriverWireTests.SpeedId, 40.0f);
|
||||
await WaitAsync(() => { lock (seen) return seen.Any(s => s is { Status: 0u, Value: 40.0f }); },
|
||||
"a change published right after recovery must reach the node (via the subscription or the trailing re-read)");
|
||||
await drv.ReconcileTaskForTest;
|
||||
|
||||
// The SDK flushes the notifications held during the stall seconds after recovery (the #670 F2 shape). Wait for
|
||||
// that flush before judging ordering, or the check below would pass on a run where nothing late arrived.
|
||||
await WaitAsync(() => { lock (seen) return lateMessages > 0; },
|
||||
"the SDK's late backlog flush did not arrive — the no-regression check below would be vacuous");
|
||||
|
||||
lock (seen)
|
||||
{
|
||||
var good = seen.Where(s => s.Status == 0u && s.Source is not null).ToList();
|
||||
for (var i = 1; i < good.Count; i++)
|
||||
good[i].Source!.Value.ShouldBeGreaterThanOrEqualTo(good[i - 1].Source!.Value,
|
||||
$"published Good value #{i} ({good[i].Value}) regressed in source time — a late replay reached the " +
|
||||
$"node. Sequence: [{string.Join(", ", good.Select(s => $"{s.Value}@{s.Source:HH:mm:ss.fff}"))}]");
|
||||
seen.Last().Value.ShouldBe(40.0f, "nothing older may land after the latest value");
|
||||
seen.Count(s => s.Status == BadNoCommunication).ShouldBe(1);
|
||||
}
|
||||
drv.GetHealth().State.ShouldBe(DriverState.Healthy);
|
||||
drv.Session.ShouldBeSameAs(session);
|
||||
Volatile.Read(ref connectionLost).ShouldBe(0,
|
||||
"a stall is AMBIGUOUS (the session survived it) — it must go through the #527 watchdog, never the fast path");
|
||||
}
|
||||
}
|
||||
+3
-4
@@ -41,10 +41,10 @@ public sealed class OpcUaClientDriverWireTests
|
||||
|
||||
internal static OpcUaClientDriver NewDriver(
|
||||
ServerEventRig rig, string id, string? browseRoot = null, IReadOnlyList<RawTagEntry>? extraTags = null,
|
||||
TimeSpan? reconnectPeriod = null) =>
|
||||
string? endpointUrl = null, TimeSpan? timeout = null) =>
|
||||
new(new OpcUaClientDriverOptions
|
||||
{
|
||||
EndpointUrl = rig.EndpointUrl,
|
||||
EndpointUrl = endpointUrl ?? rig.EndpointUrl,
|
||||
RawTags =
|
||||
[
|
||||
Tag(SpeedRef, ServerEventRig.RawNsu(SpeedId)),
|
||||
@@ -58,11 +58,10 @@ public sealed class OpcUaClientDriverWireTests
|
||||
Username = "apikey",
|
||||
Password = ServerEventRig.KeyPassword,
|
||||
AutoAcceptCertificates = true,
|
||||
Timeout = TimeSpan.FromSeconds(10),
|
||||
Timeout = timeout ?? TimeSpan.FromSeconds(10),
|
||||
SessionTimeout = TimeSpan.FromSeconds(30),
|
||||
KeepAliveInterval = TimeSpan.FromSeconds(1),
|
||||
BrowseRoot = browseRoot,
|
||||
ReconnectPeriod = reconnectPeriod ?? TimeSpan.FromSeconds(5),
|
||||
}, id);
|
||||
|
||||
internal static async Task<ServerEventRig> StartRigAsync(string name, CancellationToken ct)
|
||||
|
||||
@@ -0,0 +1,126 @@
|
||||
using System.Net;
|
||||
using System.Net.Sockets;
|
||||
|
||||
namespace ZB.MOM.WW.OtOpcUa.OpcUaServer.IntegrationTests;
|
||||
|
||||
/// <summary>
|
||||
/// Gitea #676 — an in-test TCP forwarder that can STALL a connection without closing it: the shape of a
|
||||
/// <c>docker pause</c>, a hung switch port or a congested WAN link, where the socket stays open and simply stops
|
||||
/// carrying bytes. Each accepted connection gets a fresh upstream connection and two copy pumps; every pump awaits a
|
||||
/// shared gate before each write, so <see cref="Pause"/> holds all traffic in both directions (bytes already read
|
||||
/// are held, the rest back up in the kernel buffers) and <see cref="Resume"/> lets it all through in order. Nothing
|
||||
/// is ever closed by a pause — the outage is invisible at the TCP level, exactly as in production.
|
||||
/// </summary>
|
||||
internal sealed class TcpStallProxy : IAsyncDisposable
|
||||
{
|
||||
private readonly TcpListener _listener = new(IPAddress.Loopback, 0);
|
||||
private readonly int _targetPort;
|
||||
private readonly CancellationTokenSource _cts = new();
|
||||
private readonly List<TcpClient> _sockets = [];
|
||||
private readonly Lock _lock = new();
|
||||
private TaskCompletionSource _gate = Open();
|
||||
private Task _acceptLoop = Task.CompletedTask;
|
||||
|
||||
private TcpStallProxy(int targetPort) => _targetPort = targetPort;
|
||||
|
||||
/// <summary>The loopback port clients connect to.</summary>
|
||||
public int Port => ((IPEndPoint)_listener.LocalEndpoint).Port;
|
||||
|
||||
/// <summary>Number of client connections accepted so far — a new one means the client re-connected.</summary>
|
||||
public int AcceptedConnections { get; private set; }
|
||||
|
||||
/// <summary>Starts forwarding <c>127.0.0.1:{Port}</c> to <c>127.0.0.1:{targetPort}</c>.</summary>
|
||||
public static TcpStallProxy Start(int targetPort)
|
||||
{
|
||||
var proxy = new TcpStallProxy(targetPort);
|
||||
proxy._listener.Start();
|
||||
proxy._acceptLoop = proxy.AcceptLoopAsync();
|
||||
return proxy;
|
||||
}
|
||||
|
||||
/// <summary>Rewrites the port of an <c>opc.tcp</c> URL to this proxy's.</summary>
|
||||
public string Through(string endpointUrl) => new UriBuilder(endpointUrl) { Port = Port }.Uri.ToString();
|
||||
|
||||
/// <summary>Stops all traffic in both directions; sockets stay open.</summary>
|
||||
public void Pause()
|
||||
{
|
||||
lock (_lock)
|
||||
if (_gate.Task.IsCompleted) _gate = new TaskCompletionSource(TaskCreationOptions.RunContinuationsAsynchronously);
|
||||
}
|
||||
|
||||
/// <summary>Releases everything held since <see cref="Pause"/>, in order.</summary>
|
||||
public void Resume()
|
||||
{
|
||||
lock (_lock) _gate.TrySetResult();
|
||||
}
|
||||
|
||||
private static TaskCompletionSource Open()
|
||||
{
|
||||
var tcs = new TaskCompletionSource(TaskCreationOptions.RunContinuationsAsynchronously);
|
||||
tcs.SetResult();
|
||||
return tcs;
|
||||
}
|
||||
|
||||
private Task CurrentGate()
|
||||
{
|
||||
lock (_lock) return _gate.Task;
|
||||
}
|
||||
|
||||
private async Task AcceptLoopAsync()
|
||||
{
|
||||
while (!_cts.IsCancellationRequested)
|
||||
{
|
||||
TcpClient client;
|
||||
try { client = await _listener.AcceptTcpClientAsync(_cts.Token); }
|
||||
catch { return; }
|
||||
var upstream = new TcpClient();
|
||||
try { await upstream.ConnectAsync(IPAddress.Loopback, _targetPort, _cts.Token); }
|
||||
catch
|
||||
{
|
||||
client.Dispose();
|
||||
upstream.Dispose();
|
||||
continue;
|
||||
}
|
||||
lock (_lock)
|
||||
{
|
||||
AcceptedConnections++;
|
||||
_sockets.Add(client);
|
||||
_sockets.Add(upstream);
|
||||
}
|
||||
_ = PumpAsync(client.GetStream(), upstream.GetStream());
|
||||
_ = PumpAsync(upstream.GetStream(), client.GetStream());
|
||||
}
|
||||
}
|
||||
|
||||
private async Task PumpAsync(NetworkStream from, NetworkStream to)
|
||||
{
|
||||
var buffer = new byte[64 * 1024];
|
||||
try
|
||||
{
|
||||
while (true)
|
||||
{
|
||||
var n = await from.ReadAsync(buffer, _cts.Token);
|
||||
if (n == 0) break;
|
||||
await CurrentGate().WaitAsync(_cts.Token);
|
||||
await to.WriteAsync(buffer.AsMemory(0, n), _cts.Token);
|
||||
}
|
||||
}
|
||||
catch { /* either side gone or the proxy disposed */ }
|
||||
// Half-close propagation is not needed: a real close (server stopped) tears the pair down on the next read.
|
||||
try { to.Socket.Shutdown(SocketShutdown.Send); } catch { }
|
||||
}
|
||||
|
||||
public async ValueTask DisposeAsync()
|
||||
{
|
||||
Resume();
|
||||
await _cts.CancelAsync();
|
||||
_listener.Stop();
|
||||
try { await _acceptLoop; } catch { }
|
||||
lock (_lock)
|
||||
{
|
||||
foreach (var s in _sockets) s.Dispose();
|
||||
_sockets.Clear();
|
||||
}
|
||||
_cts.Dispose();
|
||||
}
|
||||
}
|
||||
+157
@@ -0,0 +1,157 @@
|
||||
using Akka.Actor;
|
||||
using Shouldly;
|
||||
using Xunit;
|
||||
using ZB.MOM.WW.OtOpcUa.Core.Abstractions;
|
||||
using ZB.MOM.WW.OtOpcUa.Runtime.Drivers;
|
||||
using ZB.MOM.WW.OtOpcUa.Runtime.Tests.Harness;
|
||||
|
||||
namespace ZB.MOM.WW.OtOpcUa.Runtime.Tests.Drivers;
|
||||
|
||||
/// <summary>
|
||||
/// Gitea #676 — a driver that KNOWS its connection is gone (<see cref="IDriverConnectionLossSource"/>) gets
|
||||
/// re-initialised at once instead of after the #527 watchdog's silence window (~90 s in production). The watchdog is
|
||||
/// configured at an hour here, so anything that reconnects within seconds can only be the new signal.
|
||||
/// </summary>
|
||||
public sealed class DriverInstanceActorConnectionLossSignalTests : RuntimeActorTestBase
|
||||
{
|
||||
private static readonly TimeSpan FastPoll = TimeSpan.FromMilliseconds(50);
|
||||
|
||||
/// <summary>A permanently Healthy (fresh-read) stub — the watchdog can never fire for it — that can raise
|
||||
/// <see cref="IDriverConnectionLossSource.ConnectionLost"/> on demand and counts its attached handlers.</summary>
|
||||
private sealed class LossSourceStubDriver : StubDriver, IDriverConnectionLossSource
|
||||
{
|
||||
private EventHandler<DriverConnectionLossEventArgs>? _handlers;
|
||||
private int _handlerCount;
|
||||
|
||||
private int _healthReads;
|
||||
|
||||
public int HandlerCount => Volatile.Read(ref _handlerCount);
|
||||
|
||||
/// <summary>Health-poll observations — the positive control for an absence assertion.</summary>
|
||||
public int HealthReadCount => Volatile.Read(ref _healthReads);
|
||||
|
||||
public override DriverHealth GetHealth()
|
||||
{
|
||||
Interlocked.Increment(ref _healthReads);
|
||||
return base.GetHealth();
|
||||
}
|
||||
|
||||
public event EventHandler<DriverConnectionLossEventArgs>? ConnectionLost
|
||||
{
|
||||
add { _handlers += value; Interlocked.Increment(ref _handlerCount); }
|
||||
remove { _handlers -= value; Interlocked.Decrement(ref _handlerCount); }
|
||||
}
|
||||
|
||||
/// <summary>Raised from a pool thread, as a real driver's keep-alive callback would.</summary>
|
||||
public Task RaiseAsync(string reason) =>
|
||||
Task.Run(() => _handlers?.Invoke(this, new DriverConnectionLossEventArgs(reason)));
|
||||
}
|
||||
|
||||
private (IActorRef Actor, Akka.TestKit.TestProbe Parent) Connect(LossSourceStubDriver driver)
|
||||
{
|
||||
var parent = CreateTestProbe();
|
||||
var actor = parent.ChildActorOf(DriverInstanceActor.Props(
|
||||
driver,
|
||||
reconnectInterval: TimeSpan.FromHours(1),
|
||||
healthPollInterval: FastPoll,
|
||||
commsLossTimeout: TimeSpan.FromHours(1)));
|
||||
actor.Tell(new DriverInstanceActor.InitializeRequested("{}"));
|
||||
parent.ExpectMsg<DriverInstanceActor.ConnectivityChanged>(TimeSpan.FromSeconds(3)).Connected.ShouldBeTrue();
|
||||
return (actor, parent);
|
||||
}
|
||||
|
||||
[Fact]
|
||||
public async Task A_connection_loss_from_a_connected_driver_reconnects_at_once_not_after_the_watchdog()
|
||||
{
|
||||
var driver = new LossSourceStubDriver();
|
||||
var (_, parent) = Connect(driver);
|
||||
var started = DateTime.UtcNow;
|
||||
|
||||
await driver.RaiseAsync("keep-alive reported BadServerHalted");
|
||||
|
||||
parent.ExpectMsg<DriverInstanceActor.ConnectivityChanged>(TimeSpan.FromSeconds(3)).Connected.ShouldBeFalse();
|
||||
(DateTime.UtcNow - started).ShouldBeLessThan(TimeSpan.FromSeconds(3),
|
||||
"the watchdog is configured at an hour, so only the connection-loss signal can have done this");
|
||||
}
|
||||
|
||||
/// <summary>
|
||||
/// The falsification control: the same driver and actor with the event suppressed stays Connected — so the
|
||||
/// Reconnecting above is the signal's doing, not something the setup would have done anyway.
|
||||
/// </summary>
|
||||
[Fact]
|
||||
public void Without_a_raise_the_same_driver_stays_connected()
|
||||
{
|
||||
var driver = new LossSourceStubDriver();
|
||||
var (_, parent) = Connect(driver);
|
||||
|
||||
var ticksAtConnect = driver.HealthReadCount;
|
||||
parent.ExpectNoMsg(TimeSpan.FromMilliseconds(600));
|
||||
(driver.HealthReadCount - ticksAtConnect).ShouldBeGreaterThanOrEqualTo(5,
|
||||
"health-poll ticks did not run — the absence assertion above would be vacuous");
|
||||
driver.HandlerCount.ShouldBe(1, "attached, so the absence above is not merely an unwired event");
|
||||
driver.InitializeCount.ShouldBe(1, "and nothing re-initialised the driver");
|
||||
}
|
||||
|
||||
/// <summary>
|
||||
/// A raise while NOT Connected is ignored, not deferred: here it lands while the initial connect is still in
|
||||
/// flight. Acting on it later would tear down the connection that very attempt is building.
|
||||
/// </summary>
|
||||
[Fact]
|
||||
public async Task A_raise_while_connecting_is_ignored()
|
||||
{
|
||||
var driver = new LossSourceStubDriver();
|
||||
var release = new TaskCompletionSource();
|
||||
var initStarted = new TaskCompletionSource();
|
||||
driver.InitBehavior = async _ =>
|
||||
{
|
||||
initStarted.TrySetResult();
|
||||
await release.Task;
|
||||
};
|
||||
var parent = CreateTestProbe();
|
||||
var actor = parent.ChildActorOf(DriverInstanceActor.Props(
|
||||
driver,
|
||||
reconnectInterval: TimeSpan.FromHours(1),
|
||||
healthPollInterval: FastPoll,
|
||||
commsLossTimeout: TimeSpan.FromHours(1)));
|
||||
actor.Tell(new DriverInstanceActor.InitializeRequested("{}"));
|
||||
await initStarted.Task.WaitAsync(TimeSpan.FromSeconds(3));
|
||||
|
||||
// The raise is enqueued before the connect can complete (RaiseAsync returns after the Tell), so the mailbox
|
||||
// delivers it while the actor is still Connecting.
|
||||
await driver.RaiseAsync("a loss reported mid-connect");
|
||||
release.SetResult();
|
||||
|
||||
parent.ExpectMsg<DriverInstanceActor.ConnectivityChanged>(TimeSpan.FromSeconds(3)).Connected.ShouldBeTrue();
|
||||
parent.ExpectNoMsg(TimeSpan.FromMilliseconds(600));
|
||||
driver.InitializeCount.ShouldBe(1);
|
||||
}
|
||||
|
||||
[Fact]
|
||||
public void The_handler_is_attached_once_and_detached_when_the_actor_stops()
|
||||
{
|
||||
var driver = new LossSourceStubDriver();
|
||||
var (actor, parent) = Connect(driver);
|
||||
driver.HandlerCount.ShouldBe(1);
|
||||
|
||||
parent.Watch(actor);
|
||||
Sys.Stop(actor);
|
||||
// PostStop announces comms loss (03/S15) before the Terminated arrives.
|
||||
parent.FishForMessage(m => m is Terminated t && t.ActorRef.Equals(actor), TimeSpan.FromSeconds(3));
|
||||
|
||||
driver.HandlerCount.ShouldBe(0, "the IDriver outlives the actor on a respawn — a leaked handler holds a dead Self");
|
||||
}
|
||||
|
||||
/// <summary>A driver that does not implement the interface is simply never subscribed — the signal is opt-in.</summary>
|
||||
[Fact]
|
||||
public void A_driver_without_the_capability_connects_as_before()
|
||||
{
|
||||
var driver = new StubDriver();
|
||||
var parent = CreateTestProbe();
|
||||
var actor = parent.ChildActorOf(DriverInstanceActor.Props(
|
||||
driver, reconnectInterval: TimeSpan.FromHours(1), healthPollInterval: FastPoll,
|
||||
commsLossTimeout: TimeSpan.FromHours(1)));
|
||||
actor.Tell(new DriverInstanceActor.InitializeRequested("{}"));
|
||||
parent.ExpectMsg<DriverInstanceActor.ConnectivityChanged>(TimeSpan.FromSeconds(3)).Connected.ShouldBeTrue();
|
||||
parent.ExpectNoMsg(TimeSpan.FromMilliseconds(300));
|
||||
}
|
||||
}
|
||||
Reference in New Issue
Block a user