Phase 3 PR 51 -- DL260 X-input FC02 discrete-input mapping end-to-end test. Integration test DL205XInputTests reads FC02 at the DirectLogicAddress.XInputToDiscrete-resolved address and asserts two behaviors against the dl205.json pymodbus profile: (1) X20 octal (=decimal 16 = Modbus DI 16) reads ON, proving the helper correctly octal-parses the trailing number and adds it to the 0 base; (2) X21 octal reads OFF (not exception) -- per docs/v2/dl205.md §I/O-mapping, 'reading a non-populated X input returns zero, not an exception' on DL260, because the CPU sizes the discrete-input table to the configured I/O not the installed hardware. Pymodbus models this by returning the default 0 value for any DI bit in the configured 'di size' range that wasn't explicitly seeded, matching real DL260 behaviour. Test uses X20 rather than X0 to sidestep a shared-blocks conflict: pymodbus places FC01/FC02 bit-address 0..15 into cell 0, but cell 0 is already uint16-typed (V0 marker = 0xCAFE) per the register-zero quirk test, and shared-blocks semantics allow only one type per cell. X20 octal = DI 16 lands in cell 1 which is free, so both the V0 quirk AND the X-input quirk can coexist in one profile. dl205.json: bits cell 1 seeded value=9 (bits 0 and 3 set -> X20, X23 octal = ON), write-range extended to include cell 1 (though X-inputs are read-only; the write-range entry is required by pymodbus for ANY cell referenced in a bits section even if only reads are expected -- pymodbus validates write-access uniformly). 10/10 DL205 integration tests pass with MODBUS_SIM_PROFILE=dl205. No driver code changes -- the XInputToDiscrete helper + FC02 read path already landed in PRs 50 and 21 respectively. This PR closes the integration-test gap that docs/v2/dl205.md called out under test name DL205_Xinput_unpopulated_reads_as_zero.

Three substantive issues caught + fixed during the validation pass:
1. pymodbus rejects unknown keys at device-list / setup level. My PR 43 commit had `_layout_note`, `_uint16_layout`, `_bits_layout`, `_write_note` device-level JSON-comment fields that crashed pymodbus startup with `INVALID key in setup`. Removed all device-level _* fields. Inline `_quirk` keys WITHIN individual register entries are tolerated by pymodbus 3.13.0 — kept those in dl205.json since they document the byte math per quirk and the README + git history aren't enough context for a hand-author reading raw integer values. Documented the constraint in the top-level _comment of each profile.
2. pymodbus rejects sweeping `write` ranges that include any cell not assigned a type. My initial standard.json had `write: [[0, 2047]]` but only seeded HR[0..31] + HR[100] + HR[200..209] + bits[1024..1109] — pymodbus blew up on cell 32 (gap between HR[31] and HR[100]). Fixed by listing per-block write ranges that exactly mirror the seeded ranges. Same fix in dl205.json (was `[[0, 16383]]`).
3. pymodbus simulator stores all 4 standard Modbus tables in ONE underlying cell array — each cell can only be typed once (BITS or UINT16, not both). My initial standard.json had `bits[0..31]` AND `uint16[0..31]` overlapping at the same addresses; pymodbus crashed with `ERROR "uint16" <Cell> used`. Fixed by relocating coils to address 1024+, well clear of the uint16 entries at 0..209. Documented the layout constraint in the standard.json top-level _comment.
Substantive driver bug fixed: ModbusTcpTransport.ConnectAsync was using `new TcpClient()` (default constructor — dual-stack, IPv6 first) then `ConnectAsync(host, port)` with the user's hostname. .NET's TcpClient default-resolves "localhost" to ::1 first, fails to connect to pymodbus (which binds 0.0.0.0 IPv4-only), and only then retries IPv4 — the failure surfaces as the entire ConnectAsync timeout (2s by default) before the IPv4 attempt even starts. PR 30's smoke test silently SKIPPED because the fixture's TCP probe hit the same dual-stack ordering and timed out. Both fixed: ModbusSimulatorFixture probe now resolves Dns.GetHostAddresses, prefers AddressFamily.InterNetwork, dials IPv4 explicitly. ModbusTcpTransport does the same — resolves first, prefers IPv4, falls back to whatever Dns returns (handles IPv6-only hosts in the future). This is a real production-readiness fix because most Modbus PLCs are IPv4-only — a generic dual-stack TcpClient would burn the entire connect timeout against any IPv4-only PLC, masquerading as a connection failure when the PLC is actually fine.
Smoke-test address shifted HR[100] -> HR[200]. Standard.json's HR[100] is the auto-incrementing register that drives subscribe-and-receive tests, so write-then-read against it would race the increment. HR[200] is the first cell of a writable scratch range present in BOTH simulator profiles. DL205Profile.cs xml-doc updated to explain the shift; tag name "DL205_Smoke_HReg100" -> "Smoke_HReg200" + smoke test references updated. dl205.json gains a matching scratch HR[200..209] range so the smoke test runs identically against either profile.
Validation matrix:
- standard.json boot: clean (TCP 5020 listening within ~3s of pymodbus.simulator launch).
- dl205.json boot: clean.
- pymodbus client direct FC06 to HR[200]=1234 + FC03 read: round-trip OK.
- raw-bytes PowerShell TcpClient FC06 + 12-byte response: matches FC06 spec (echo of address + value).
- DL205SmokeTest against standard.json: 1/1 pass (was failing as 'BadInternalError' due to the dual-stack timeout + tag-name typo — both fixed).
- DL205SmokeTest against dl205.json: 1/1 pass.
- Modbus.Tests Unit suite: 52/52 pass — dual-stack transport fix is non-breaking.
- Solution build clean.
Memory + future-PR setup: pymodbus install + activation pattern is now bullet-pointed at the top of Pymodbus/README.md so future PRs (the per-quirk DL205_<behavior> tests in PR 44+) don't have to repeat the trial-and-error of getting the simulator + integration tests cooperating. The three bugs above are documented inline in the JSON profiles + ModbusTcpTransport so they don't bite again.

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>

.gitignore

@@ -29,3 +29,4 @@ packages/
 # Claude Code (per-developer settings, runtime lock files, agent transcripts)
 .claude/
 
+.local/

ZB.MOM.WW.OtOpcUa.slnx

@@ -21,9 +21,11 @@
         <Project Path="tests/ZB.MOM.WW.OtOpcUa.Admin.Tests/ZB.MOM.WW.OtOpcUa.Admin.Tests.csproj"/>
         <Project Path="tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Shared.Tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Shared.Tests.csproj"/>
         <Project Path="tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Host.Tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Host.Tests.csproj"/>
+        <Project Path="tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport.csproj"/>
         <Project Path="tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Proxy.Tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Proxy.Tests.csproj"/>
         <Project Path="tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.E2E/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.E2E.csproj"/>
         <Project Path="tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.Tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.Tests.csproj"/>
+        <Project Path="tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests.csproj"/>
         <Project Path="tests/ZB.MOM.WW.OtOpcUa.Client.Shared.Tests/ZB.MOM.WW.OtOpcUa.Client.Shared.Tests.csproj"/>
         <Project Path="tests/ZB.MOM.WW.OtOpcUa.Client.CLI.Tests/ZB.MOM.WW.OtOpcUa.Client.CLI.Tests.csproj"/>
         <Project Path="tests/ZB.MOM.WW.OtOpcUa.Client.UI.Tests/ZB.MOM.WW.OtOpcUa.Client.UI.Tests.csproj"/>

docs/security.md

@@ -348,6 +348,44 @@ The project uses [GLAuth](https://github.com/glauth/glauth) v2.4.0 as the LDAP s
 
 Enable LDAP in `appsettings.json` under `Authentication.Ldap`. See [Configuration Guide](Configuration.md) for the full property reference.
 
+### Active Directory configuration
+
+Production deployments typically point at Active Directory instead of GLAuth. Only four properties differ from the dev defaults: `Server`, `Port`, `UserNameAttribute`, and `ServiceAccountDn`. The same `GroupToRole` mechanism works — map your AD security groups to OPC UA roles.
+
+```json
+{
+  "OpcUaServer": {
+    "Ldap": {
+      "Enabled": true,
+      "Server": "dc01.corp.example.com",
+      "Port": 636,
+      "UseTls": true,
+      "AllowInsecureLdap": false,
+      "SearchBase": "DC=corp,DC=example,DC=com",
+      "ServiceAccountDn": "CN=OpcUaSvc,OU=Service Accounts,DC=corp,DC=example,DC=com",
+      "ServiceAccountPassword": "<from your secret store>",
+      "DisplayNameAttribute": "displayName",
+      "GroupAttribute": "memberOf",
+      "UserNameAttribute": "sAMAccountName",
+      "GroupToRole": {
+        "OPCUA-Operators": "WriteOperate",
+        "OPCUA-Engineers": "WriteConfigure",
+        "OPCUA-AlarmAck": "AlarmAck",
+        "OPCUA-Tuners": "WriteTune"
+      }
+    }
+  }
+}
+```
+
+Notes:
+
+- `UserNameAttribute: "sAMAccountName"` is the critical AD override — the default `uid` is not populated on AD user entries, so the user-DN lookup returns no results without it. Use `userPrincipalName` instead if operators log in with `user@corp.example.com` form.
+- `Port: 636` + `UseTls: true` is required under AD's LDAP-signing enforcement. AD increasingly rejects plain-LDAP bind; set `AllowInsecureLdap: false` to refuse fallback.
+- `ServiceAccountDn` should name a dedicated read-only service principal — not a privileged admin. The account needs read access to user and group entries in the search base.
+- `memberOf` values come back as full DNs like `CN=OPCUA-Operators,OU=OPC UA Security Groups,OU=Groups,DC=corp,DC=example,DC=com`. The authenticator strips the leading `CN=` RDN value so operators configure `GroupToRole` with readable group common-names.
+- Nested group membership is **not** expanded — assign users directly to the role-mapped groups, or pre-flatten membership in AD. `LDAP_MATCHING_RULE_IN_CHAIN` / `tokenGroups` expansion is an authenticator enhancement, not a config change.
+
 ### Security Considerations
 
 - LDAP credentials are transmitted in plaintext over the OPC UA channel unless transport security is enabled. Use `Basic256Sha256-SignAndEncrypt` for production deployments.

docs/v2/dl205.md

@@ -0,0 +1,295 @@
+# AutomationDirect DirectLOGIC DL205 / DL260 — Modbus quirks
+
+AutomationDirect's DirectLOGIC DL205 family (D2-250-1, D2-260, D2-262, D2-262M) and
+its larger DL260 sibling speak Modbus TCP (via the H2-ECOM100 / H2-EBC100 Ethernet
+coprocessors, and the DL260's built-in Ethernet port) and Modbus RTU (via the CPU
+serial ports in "Modbus" mode). They are mostly spec-compliant, but every one of
+the following categories has at least one trap that a textbook Modbus client gets
+wrong: octal V-memory to decimal Modbus translation, non-IEEE "BCD-looking" default
+numeric encoding, CDAB word order for 32-bit values, ASCII character packing that
+the user flagged as non-standard, and sub-spec maximum-register limits on the
+Ethernet modules. This document catalogues each quirk, cites primary sources, and
+names the ModbusPal integration test we'd write for it (convention from
+`docs/v2/modbus-test-plan.md`: `DL205_<behavior>`).
+
+## Strings
+
+DirectLOGIC does not have a first-class Modbus "string" type; strings live inside
+V-memory as consecutive 16-bit registers, and the CPU's string instructions
+(`PRINTV`, `VPRINT`, `ACON`/`NCON` in ladder) read/write them in a specific layout
+that a naive Modbus client will byte-swap [1][2].
+
+- **Packing**: two ASCII characters per V-memory register (two per holding
+  register). The *first* character of the pair occupies the **low byte** of the
+  register, the *second* character occupies the **high byte** [2]. This is the
+  opposite of the big-endian Modbus convention that Kepware / Ignition / most
+  generic drivers assume by default, so strings come back with every pair of
+  characters swapped (`"Hello"` reads as `"eHll o\0"`).
+- **Termination**: null-terminated (`0x00` in the character byte). There is no
+  length prefix. Writes must pad the final register's unused byte with `0x00`.
+- **Byte order within the register**: little-endian for character data, even
+  though the same CPU stores **numeric** V-memory values big-endian on the wire.
+  This mixed-endianness is the single most common reason DL-series strings look
+  corrupted in a generic HMI. Kepware's DirectLogic driver exposes a per-tag
+  "String Byte Order = Low/High" toggle specifically for this [3].
+- **K-memory / KSTR**: DirectLOGIC does **not** expose a dedicated `KSTR` string
+  address space — K-memory on these CPUs is scratch bit/word memory, not a string
+  pool. Strings live wherever the ladder program allocates them in V-memory
+  (typically user V2000-V7777 octal on DL260, V2000-V3777 on DL205 D2-260) [2].
+- **Maximum length**: bounded only by the V-memory region assigned. The `VPRINT`
+  instruction allows up to 128 characters (64 registers) per call [2]; larger
+  strings require multiple reads.
+- **V-memory interaction**: an "address a string at V2000 of length 20" tag is
+  really "read 10 consecutive holding registers starting at the Modbus address
+  that V2000 translates to (see next section), unpack each register low-byte
+  then high-byte, stop at the first `0x00`."
+
+Test names:
+`DL205_String_low_byte_first_within_register`,
+`DL205_String_null_terminator_stops_read`,
+`DL205_String_write_pads_final_byte_with_zero`.
+
+## V-Memory Addressing
+
+DirectLOGIC addresses are **octal**; Modbus addresses are **decimal**. The CPU's
+internal Modbus server performs the translation, but the formulas differ per
+CPU family and are 1-based in the "Modicon 4xxxx" form vs 0-based on the wire
+[4][5].
+
+Canonical DL260 / DL250-1 mapping (from the D2-USER-M appendix and the H2-ECOM
+manual) [4][5]:
+
+```
+V-memory (octal)        Modicon 4xxxx (1-based)   Modbus PDU addr (0-based)
+V0        (user)        40001                     0x0000
+V1                      40002                     0x0001
+V2000     (user)        41025                     0x0400
+V7777     (user)        44096                     0x0FFF
+V40400    (system)      48449                     0x2100
+V41077                  ~8848                     (read-only status)
+```
+
+Formula: `Modbus_0based = octal_to_decimal(Vaddr)`. So `V2000` octal = `1024`
+decimal = Modbus PDU address `0x0400`. The "4xxxx" Modicon view just adds 1 and
+prefixes the register bank digit.
+
+- **V40400 is the Modbus starting offset for system registers on the DL260**;
+  its 0-based PDU address is `0x2100` (decimal 8448), not 0. The widespread
+  "V40400 = register 0" shorthand is wrong on modern firmware — that was true
+  on the older DL05/DL06 when the ECOM module was configured in "relative"
+  addressing mode. On the H2-ECOM100 factory default ("absolute" mode), V40400
+  maps to 0x2100 [5].
+- **DL205 (D2-260) vs DL260 differences**:
+    - DL205 D2-260 user V-memory: V1400-V7377 and V10000-V17777 octal.
+    - DL260 user V-memory: V1400-V7377, V10000-V35777, and V40000-V77777 octal
+      (much larger) [4].
+    - DL205 D2-262 / D2-262M adds the same extended V-memory as DL260 but
+      retains the DL205 I/O base form factor.
+    - Neither DL205 sub-model changes the *formula* — only the valid range.
+- **Bit-in-V-memory (C, X, Y relays)**: control relays `C0`-`C1777` octal live
+  in V40600-V40677 (DL260) as packed bits; the Modbus server exposes them *both*
+  as holding-register bits (read the whole word and mask) *and* as Modbus coils
+  via FC01/FC05 at coil addresses 3072-4095 (0-based) [5]. `X` inputs map to
+  Modbus discrete inputs starting at FC02 address 0; `Y` outputs map to Modbus
+  coils starting at FC01/FC05 address 2048 (0-based) on the DL260.
+- **Off-by-one gotcha**: the AutomationDirect manuals use the 1-based 4xxxx
+  form. Kepware, libmodbus, pymodbus, and the .NET stack all take the 0-based
+  PDU form. When the manual says "V2000 = 41025" you send `0x0400`, not
+  `0x0401`.
+
+Test names:
+`DL205_Vmem_V2000_maps_to_PDU_0x0400`,
+`DL260_Vmem_V40400_maps_to_PDU_0x2100`,
+`DL260_Crelay_C0_maps_to_coil_3072`.
+
+## Word Order (Int32 / UInt32 / Float32)
+
+DirectLOGIC CPUs store 32-bit values across **two consecutive V-memory words,
+low word first** — i.e., `CDAB` when viewed as a Modbus register pair [1][3].
+Within each word, bytes are big-endian (high byte of the word in the high byte
+of the Modbus register), so the full wire layout for a 32-bit value `0xAABBCCDD`
+is:
+
+```
+Register N   : 0xCC 0xDD   (low word, big-endian bytes)
+Register N+1 : 0xAA 0xBB   (high word, big-endian bytes)
+```
+
+- This is the same "little-endian word / big-endian byte" layout Kepware calls
+  `Double Word Swapped` and Ignition calls `CDAB` [3][6].
+- **DL205 and DL260 agree** — the convention is a CPU-level choice, not a
+  module choice. The H2-ECOM100 and H2-EBC100 do **not** re-swap; they're pure
+  Modbus-TCP-to-backplane bridges [5]. The DL260 built-in Ethernet port
+  behaves identically.
+- **Float32**: IEEE 754 single-precision, but only when the ladder explicitly
+  uses the `R` (real) data type. DirectLOGIC's default numeric storage is
+  **BCD** — `V2000 = 1234` in ladder stores `0x1234` on the wire, not `0x04D2`.
+  A Modbus client reading what the operator sees as "1234" gets back a raw
+  register value of `0x1234` and must BCD-decode it. Float32 values are only
+  IEEE 754 if the ladder programmer used `LDR`/`OUTR` instructions [1].
+- **Operator-reported**: on very old D2-240 firmware (predecessor, not in our
+  target set) the word order was `ABCD`, but every DL205/DL260 firmware
+  released since 2004 is `CDAB` [3]. _Unconfirmed_ whether any field-deployed
+  DL205 still runs pre-2004 firmware.
+
+Test names:
+`DL205_Int32_word_order_is_CDAB`,
+`DL205_Float32_IEEE754_roundtrip_when_ladder_uses_R_type`,
+`DL205_BCD_register_decodes_as_hex_nibbles`.
+
+## Function Code Support
+
+The Hx-ECOM / Hx-EBC modules and the DL260 built-in Ethernet port implement the
+following Modbus function codes [5][7]:
+
+| FC | Name                        | Supported | Max qty / request |
+|----|-----------------------------|-----------|-------------------|
+| 01 | Read Coils                  | Yes       | 2000 bits         |
+| 02 | Read Discrete Inputs        | Yes       | 2000 bits         |
+| 03 | Read Holding Registers      | Yes       | **128** (not 125) |
+| 04 | Read Input Registers        | Yes       | 128               |
+| 05 | Write Single Coil           | Yes       | 1                 |
+| 06 | Write Single Register       | Yes       | 1                 |
+| 15 | Write Multiple Coils        | Yes       | 800 bits          |
+| 16 | Write Multiple Registers    | Yes       | **100**           |
+| 07 | Read Exception Status       | Yes (RTU) | —                 |
+| 17 | Report Server ID            | No        | —                 |
+
+- **FC03/FC04 limit is 128**, which is above the Modbus spec's 125. Requesting
+  129+ returns exception code `03` (Illegal Data Value) [5].
+- **FC16 limit is 100**, below the spec's 123. This is the most common source of
+  "works in test, fails in bulk-write production" bugs — our driver should cap
+  at 100 when the device profile is DL205/DL260.
+- **No custom function codes** are exposed on the Modbus port. AutomationDirect's
+  native "K-sequence" protocol runs on the serial port when the CPU is set to
+  `K-sequence` mode, *not* `Modbus` mode, and over TCP only via the H2-EBC100's
+  proprietary Ethernet/IP-like protocol — not Modbus [7].
+
+Test names:
+`DL205_FC03_129_registers_returns_IllegalDataValue`,
+`DL205_FC16_101_registers_returns_IllegalDataValue`,
+`DL205_FC17_ReportServerId_returns_IllegalFunction`.
+
+## Coils and Discrete Inputs
+
+DL260 mapping (0-based Modbus addresses) [5]:
+
+| DL memory | Octal range     | Modbus table      | Modbus addr (0-based) |
+|-----------|-----------------|-------------------|-----------------------|
+| X inputs  | X0-X777         | Discrete Input    | 0 - 511               |
+| Y outputs | Y0-Y777         | Coil              | 2048 - 2559           |
+| C relays  | C0-C1777        | Coil              | 3072 - 4095           |
+| SP specials | SP0-SP777     | Discrete Input    | 1024 - 1535 (RO)      |
+
+- **C0 → coil address 3072 (0-based) = 13073 (1-based Modicon)**. Y0 → coil
+  2048 = 12049. These offsets are wired into the CPU and cannot be remapped.
+- **Reading a non-populated X input** (no physical module in that slot) returns
+  **zero**, not an exception. The CPU sizes the discrete-input table to the
+  configured I/O, not the installed hardware. Confirmed in the DL260 user
+  manual's I/O configuration chapter [4].
+- **Writing Y outputs on an output point that's forced in ladder**: the CPU
+  accepts the write and silently ignores it (the force wins). No exception is
+  returned. _Operator-reported_, matches Kepware driver release notes [3].
+
+Test names:
+`DL205_C0_maps_to_coil_3072`,
+`DL205_Y0_maps_to_coil_2048`,
+`DL205_Xinput_unpopulated_reads_as_zero`.
+
+## Register Zero
+
+The DL260's H2-ECOM100 **accepts FC03 at register 0** and returns the contents
+of `V0`. This contradicts a widespread internet claim that "DirectLOGIC rejects
+register 0" — that rumour stems from older DL05/DL06 CPUs in *relative*
+addressing mode, where V40400 was mapped to register 0 and registers below
+40400 were invalid [5][3]. On DL205/DL260 with the ECOM module in its factory
+*absolute* mode, register 0 is valid user V-memory.
+
+- Our driver's `ModbusProbeOptions.ProbeAddress` default of 0 is therefore
+  **safe** for DL205/DL260; operators don't need to override it.
+- If the module is reconfigured to "relative" addressing (a historical
+  compatibility mode), register 0 then maps to V40400 and is still valid but
+  means something different. The probe will still succeed.
+
+Test name: `DL205_FC03_register_0_returns_V0_contents`.
+
+## Exception Codes
+
+DL205/DL260 returns only the standard Modbus exception codes [5]:
+
+| Code | Name                   | When                                            |
+|------|------------------------|-------------------------------------------------|
+| 01   | Illegal Function       | FC not in supported list (e.g., FC17)           |
+| 02   | Illegal Data Address   | Register outside mapped V-memory / coil range   |
+| 03   | Illegal Data Value     | Quantity > 128 (FC03/04), > 100 (FC16), > 2000 (FC01/02), > 800 (FC15) |
+| 04   | Server Failure         | CPU in PROGRAM mode during a protected write    |
+
+- **No proprietary exception codes** (06/07/0A/0B are not used).
+- **Write to a write-protected bit** (CPU password-locked or bit in a force
+  list): returns `02` (Illegal Data Address) on newer firmware, `04` on older
+  firmware [3]. _Unconfirmed_ which firmware revision the transition happened
+  at; treat both as "not writable" in the driver's status-code mapping.
+- **Read of a write-only register**: there are no write-only registers in the
+  DL-series Modbus map. Every writable register is also readable.
+
+Test names:
+`DL205_FC03_unmapped_register_returns_IllegalDataAddress`,
+`DL205_FC06_in_ProgramMode_returns_ServerFailure`.
+
+## Behavioral Oddities
+
+- **Transaction ID echo**: the H2-ECOM100 and DL260 built-in port reliably
+  echo the MBAP TxId on every response, across firmware revisions from 2010+.
+  The rumour that "DL260 drops TxId under load" appears on the AutomationDirect
+  support forum but is _unconfirmed_ and has not reproduced on our bench; it
+  may be a user-software issue rather than firmware [8]. Our driver's
+  single-flight + TxId-match guard handles it either way.
+- **Concurrency**: the ECOM serializes requests internally. Opening multiple
+  TCP sockets from the same client does not parallelize — the CPU scans the
+  Ethernet mailbox once per PLC scan (typically 2-10 ms) and processes one
+  request per scan [5]. High-frequency polling from multiple clients
+  multiplies scan overhead linearly; keep poll rates conservative.
+- **Partial-frame disconnect recovery**: the ECOM's TCP stack closes the
+  socket on any malformed MBAP header or any frame that exceeds the declared
+  PDU length. It does not resynchronize mid-stream. The driver must detect
+  the half-close, reconnect, and replay the last request [5].
+- **Keepalive**: the ECOM does **not** send TCP keepalives. An idle socket
+  stays open on the PLC side indefinitely, but intermediate NAT/firewall
+  devices often drop it after 2-5 minutes. Driver-side keepalive or
+  periodic-probe is required for reliable long-lived subscriptions.
+- **Maximum concurrent TCP clients**: H2-ECOM100 accepts up to **4 simultaneous
+  TCP connections**; the 5th is refused at TCP accept [5]. This matters when
+  an HMI + historian + engineering workstation + our OPC UA gateway all want
+  to talk to the same PLC.
+
+Test names:
+`DL205_TxId_preserved_across_burst_of_50_requests`,
+`DL205_5th_TCP_connection_refused`,
+`DL205_socket_closes_on_malformed_MBAP`.
+
+## References
+
+1. AutomationDirect, *DL205 User Manual (D2-USER-M)*, Appendix A "Auxiliary
+   Functions" and Chapter 3 "CPU Specifications and Operation" —
+   https://cdn.automationdirect.com/static/manuals/d2userm/d2userm.html
+2. AutomationDirect, *DL260 User Manual*, Chapter 5 "Standard RLL
+   Instructions" (`VPRINT`, `PRINT`, `ACON`/`NCON`) and Appendix D "Memory
+   Map" — https://cdn.automationdirect.com/static/manuals/d2userm/d2userm.html
+3. Kepware / PTC, *DirectLogic Ethernet Driver Help*, "Device Setup" and
+   "Data Types Description" sections (word order, string byte order options) —
+   https://www.kepware.com/en-us/products/kepserverex/drivers/directlogic-ethernet/documents/directlogic-ethernet-manual.pdf
+4. AutomationDirect, *DL205 / DL260 Memory Maps*, Appendix D of the D2-USER-M
+   user manual (V-memory layout, C/X/Y ranges per CPU).
+5. AutomationDirect, *H2-ECOM / H2-ECOM100 Ethernet Communications Modules
+   User Manual (HA-ECOM-M)*, "Modbus TCP Server" chapter — octal↔decimal
+   translation tables, supported function codes, max registers per request,
+   connection limits —
+   https://cdn.automationdirect.com/static/manuals/hxecomm/hxecomm.html
+6. Inductive Automation, *Ignition Modbus Driver — Address Mapping*, word
+   order options (ABCD/CDAB/BADC/DCBA) —
+   https://docs.inductiveautomation.com/docs/8.1/ignition-modules/opc-ua/drivers/modbus-v2
+7. AutomationDirect, *Modbus RTU vs K-sequence protocol selection*,
+   DL205/DL260 serial port configuration chapter of D2-USER-M.
+8. AutomationDirect Technical Support Forum thread archives (MBAP TxId
+   behavior reports) — https://community.automationdirect.com/ (search:
+   "ECOM100 transaction id"). _Unconfirmed_ operator reports only.

docs/v2/lmx-followups.md

@@ -7,25 +7,50 @@ Basic256Sha256 endpoints and alarms are observable through
 specific before the stack can fully replace the v1 deployment, in
 rough priority order.
 
-## 1. Proxy-side `IHistoryProvider` for `ReadAtTime` / `ReadEvents`
+## 1. Proxy-side `IHistoryProvider` for `ReadAtTime` / `ReadEvents` — **DONE (PRs 35 + 38)**
 
-**Status**: Host-side IPC shipped (PR 10 + PR 11). Proxy consumer not written.
+PR 35 extended `IHistoryProvider` with `ReadAtTimeAsync` + `ReadEventsAsync`
+(default throwing implementations so existing impls keep compiling), added the
+`HistoricalEvent` + `HistoricalEventsResult` records to `Core.Abstractions`,
+and implemented both methods in `GalaxyProxyDriver` on top of the PR 10 / PR 11
+IPC messages.
 
-PR 10 added `HistoryReadAtTimeRequest/Response` on the IPC wire and
-`MxAccessGalaxyBackend.HistoryReadAtTimeAsync` delegates to
-`HistorianDataSource.ReadAtTimeAsync`. PR 11 did the same for events
-(`HistoryReadEventsRequest/Response` + `GalaxyHistoricalEvent`). The Proxy
-side (`GalaxyProxyDriver`) doesn't call those yet — `Core.Abstractions.IHistoryProvider`
-only exposes `ReadRawAsync` + `ReadProcessedAsync`.
+PR 38 wired the OPC UA HistoryRead service-handler through
+`DriverNodeManager` by overriding `CustomNodeManager2`'s four per-kind hooks —
+`HistoryReadRawModified` / `HistoryReadProcessed` / `HistoryReadAtTime` /
+`HistoryReadEvents`. Each walks `nodesToProcess`, resolves the driver-side
+full reference from `NodeId.Identifier`, dispatches to the right
+`IHistoryProvider` method, and populates the paired results + errors lists
+(both must be set — the MasterNodeManager merges them and a Good result with
+an unset error slot serializes as `BadHistoryOperationUnsupported` on the
+wire). Historized variables gain `AccessLevels.HistoryRead` so the stack
+dispatches; the driver root folder gains `EventNotifiers.HistoryRead` so
+`HistoryReadEvents` can target it.
 
-**To do**:
-- Extend `IHistoryProvider` with `ReadAtTimeAsync(string, DateTime[], …)` and
-  `ReadEventsAsync(string?, DateTime, DateTime, int, …)`.
-- `GalaxyProxyDriver` calls the new IPC message kinds.
-- `DriverNodeManager` wires the new capability methods onto `HistoryRead`
-  `AtTime` + `Events` service handlers.
-- Integration test: OPC UA client calls `HistoryReadAtTime` / `HistoryReadEvents`,
-  value flows through IPC to the Host's `HistorianDataSource`, back to the client.
+Aggregate translation uses a small `MapAggregate` helper that handles
+`Average` / `Minimum` / `Maximum` / `Total` / `Count` (the enum surface the
+driver exposes) and returns null for unsupported aggregates so the handler
+can surface `BadAggregateNotSupported`. Raw+Processed+AtTime wrap driver
+samples as `HistoryData` in an `ExtensionObject`; Events emits a
+`HistoryEvent` with the standard BaseEventType field list (EventId /
+SourceName / Message / Severity / Time / ReceiveTime) — custom
+`SelectClause` evaluation is an explicit follow-up.
+
+**Tests**:
+
+- `DriverNodeManagerHistoryMappingTests` — 12 unit cases pinning
+  `MapAggregate`, `BuildHistoryData`, `BuildHistoryEvent`, `ToDataValue`.
+- `HistoryReadIntegrationTests` — 5 end-to-end cases drive a real OPC UA
+  client (`Session.HistoryRead`) against a fake `IHistoryProvider` driver
+  through the running stack. Covers raw round-trip, processed with Average
+  aggregate, unsupported aggregate → `BadAggregateNotSupported`, at-time
+  timestamp forwarding, and events field-list shape.
+
+**Deferred**:
+- Continuation-point plumbing via `Session.Save/RestoreHistoryContinuationPoint`.
+  Driver returns null continuations today so the pass-through is fine.
+- Per-`SelectClause` evaluation in HistoryReadEvents — clients that send a
+  custom field selection currently get the standard BaseEventType layout.
 
 ## 2. Write-gating by role — **DONE (PR 26)**
 
@@ -58,52 +83,113 @@ Deferred: flipping `AutoAcceptUntrustedClientCertificates` to `false` as the
 deployment default. That's a production-hardening config change, not a code
 gap — the Admin UI is now ready to be the trust gate.
 
-## 4. Live-LDAP integration test
+## 4. Live-LDAP integration test — **DONE (PR 31)**
 
-**Status**: PR 19 unit-tested the auth-flow shape; the live bind path is
-exercised only by the pre-existing `Admin.Tests/LdapLiveBindTests.cs` which
-uses the same Novell library against a running GLAuth at `localhost:3893`.
+PR 31 shipped `Server.Tests/LdapUserAuthenticatorLiveTests.cs` — 6 live-bind
+tests against the dev GLAuth instance at `localhost:3893`, skipped cleanly
+when the port is unreachable. Covers: valid bind, wrong password, unknown
+user, empty credentials, single-group → WriteOperate mapping, multi-group
+admin user surfacing all mapped roles.
 
-**To do**:
-- Add `OpcUaServerIntegrationTests.Valid_username_authenticates_against_live_ldap`
-  with the same skip-when-unreachable guard.
-- Assert `session.Identity` on the server side carries the expected role
-  after bind — requires exposing a test hook or reading identity from a
-  new `IHostConnectivityProbe`-style "whoami" variable in the address space.
+Also added `UserNameAttribute` to `LdapOptions` (default `uid` for RFC 2307
+compat) so Active Directory deployments can configure `sAMAccountName` /
+`userPrincipalName` without code changes. `LdapUserAuthenticatorAdCompatTests`
+(5 unit guards) pins the AD-shape DN parsing + filter escape behaviors. See
+`docs/security.md` §"Active Directory configuration" for the AD appsettings
+snippet.
 
-## 5. Full Galaxy live-service smoke test against the merged v2 stack
+Deferred: asserting `session.Identity` end-to-end on the server side (i.e.
+drive a full OPC UA session with username/password, then read an
+`IHostConnectivityProbe`-style "whoami" node to verify the role surfaced).
+That needs a test-only address-space node and is a separate PR.
 
-**Status**: Individual pieces have live smoke tests (PR 5 MXAccess, PR 13
-probe manager, PR 14 alarm tracker), but the full loop — OPC UA client →
-`OtOpcUaServer` → `GalaxyProxyDriver` (in-process) → named-pipe to
-Galaxy.Host subprocess → live MXAccess runtime → real Galaxy objects — has
-no single end-to-end smoke test.
+## 5. Full Galaxy live-service smoke test against the merged v2 stack — **IN PROGRESS (PRs 36 + 37)**
 
-**To do**:
-- Test that spawns the full topology, discovers a deployed Galaxy object,
-  subscribes to one of its attributes, writes a value back, and asserts the
-  write round-tripped through MXAccess. Skip when ArchestrA isn't running.
+PR 36 shipped the prerequisites helper (`AvevaPrerequisites`) that probes
+every dependency a live smoke test needs and produces actionable skip
+messages.
 
-## 6. Second driver instance on the same server
+PR 37 shipped the live-stack smoke test project structure:
+`tests/Driver.Galaxy.Proxy.Tests/LiveStack/` with `LiveStackFixture` (connects
+to the *already-running* `OtOpcUaGalaxyHost` Windows service via named pipe;
+never spawns the Host process) and `LiveStackSmokeTests` covering:
 
-**Status**: `DriverHost.RegisterAsync` supports multiple drivers; the OPC UA
-server creates one `DriverNodeManager` per driver and isolates their
-subtrees under distinct namespace URIs. Not proven with two active
-`GalaxyProxyDriver` instances pointing at different Galaxies.
+- Fixture initializes successfully (IPC handshake succeeds end-to-end).
+- Driver reports `DriverState.Healthy` post-handshake.
+- `DiscoverAsync` returns at least one variable from the live Galaxy.
+- `GetHostStatuses` reports at least one Platform/AppEngine host.
+- `ReadAsync` on a discovered variable round-trips through
+  Proxy → Host pipe → MXAccess → back without a BadInternalError.
 
-**To do**:
-- Integration test that registers two driver instances, each with a distinct
-  `DriverInstanceId` + endpoint in its own session, asserts nodes from both
-  appear under the correct subtrees, alarm events land on the correct
-  instance's condition nodes.
+Shared secret + pipe name resolve from `OTOPCUA_GALAXY_SECRET` /
+`OTOPCUA_GALAXY_PIPE` env vars, falling back to reading the service's
+registry-stored Environment values (requires elevated test host).
 
-## 7. Host-status per-AppEngine granularity → Admin UI dashboard
+**PR 40** added the write + subscribe facts targeting
+`DelmiaReceiver_001.TestAttribute` (the writable Boolean UDA the dev Galaxy
+ships under TestMachine_001) — write-then-read with a 5s scan-window poll +
+restore-on-finally, and subscribe-then-write asserting both an initial-value
+OnDataChange and a post-write OnDataChange. PR 39 added the elevated-shell
+short-circuit so a developer running from an admin window gets an actionable
+skip instead of `UnauthorizedAccessException`.
 
-**Status**: PR 13 ships per-platform/per-AppEngine `ScanState` probing; PR 17
-surfaces the resulting `OnHostStatusChanged` events through OPC UA. Admin
-UI doesn't render a per-host dashboard yet.
+**Run the live tests** (from a NORMAL non-admin PowerShell):
 
-**To do**:
-- SignalR hub push of `HostStatusChangedEventArgs` to the Admin UI.
-- Dashboard page showing each tracked host, current state, last transition
-  time, failure count.
+```powershell
+$env:OTOPCUA_GALAXY_SECRET = Get-Content C:\Users\dohertj2\Desktop\lmxopcua\.local\galaxy-host-secret.txt
+cd C:\Users\dohertj2\Desktop\lmxopcua
+dotnet test tests\ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Proxy.Tests --filter "FullyQualifiedName~LiveStackSmokeTests"
+```
+
+Expected: 7/7 pass against the running `OtOpcUaGalaxyHost` service.
+
+**Remaining for #5 in production-grade form**:
+- Confirm the suite passes from a non-elevated shell (operator action).
+- Add similar facts for an alarm-source attribute once `TestMachine_001` (or
+  a sibling) carries a deployed alarm condition — the current dev Galaxy's
+  TestAttribute isn't alarm-flagged.
+
+## 6. Second driver instance on the same server — **DONE (PR 32)**
+
+`Server.Tests/MultipleDriverInstancesIntegrationTests.cs` registers two
+drivers with distinct `DriverInstanceId`s on one `DriverHost`, spins up the
+full OPC UA server, and asserts three behaviors: (1) each driver's namespace
+URI (`urn:OtOpcUa:{id}`) resolves to a distinct index in the client's
+NamespaceUris, (2) browsing one subtree returns that driver's folder and
+does NOT leak the other driver's folder, (3) reads route to the correct
+driver — the alpha instance returns 42 while beta returns 99, so a misroute
+would surface at the assertion layer.
+
+Deferred: the alarm-event multi-driver parity case (two drivers each raising
+a `GalaxyAlarmEvent`, assert each condition lands on its owning instance's
+condition node). Alarm tracking already has its own integration test
+(`AlarmSubscription*`); the multi-driver alarm case would need a stub
+`IAlarmSource` that's worth its own focused PR.
+
+## 7. Host-status per-AppEngine granularity → Admin UI dashboard — **DONE (PRs 33 + 34)**
+
+**PR 33** landed the data layer: `DriverHostStatus` entity + migration with
+composite key `(NodeId, DriverInstanceId, HostName)` and two query-supporting
+indexes (per-cluster drill-down on `NodeId`, stale-row detection on
+`LastSeenUtc`).
+
+**PR 34** wired the publisher + consumer. `HostStatusPublisher` is a
+`BackgroundService` in the Server process that walks every registered
+`IHostConnectivityProbe`-capable driver every 10s, calls
+`GetHostStatuses()`, and upserts rows (`LastSeenUtc` advances each tick;
+`State` + `StateChangedUtc` update on transitions). Admin UI `/hosts` page
+groups by cluster, shows four summary cards (Hosts / Running / Stale /
+Faulted), and flags rows whose `LastSeenUtc` is older than 30s as Stale so
+operators see crashed Servers without waiting for a state change.
+
+Deferred as follow-ups:
+
+- Event-driven push (subscribe to `OnHostStatusChanged` per driver for
+  sub-heartbeat latency). Adds DriverHost lifecycle-event plumbing;
+  10s polling is fine for operator-scale use.
+- Failure-count column — needs the publisher to track a transition history
+  per host, not just current-state.
+- SignalR fan-out to the Admin page (currently the page polls the DB, not
+  a hub). The DB-polled version is fine at current cadence but a hub push
+  would eliminate the 10s race where a new row sits in the DB before the
+  Admin page notices.

docs/v2/modbus-test-plan.md

@@ -6,60 +6,68 @@ routing against a textbook Modbus server. That's necessary but not sufficient: r
 populations disagree with the spec in small, device-specific ways, and a driver that
 passes textbook tests can still misbehave against actual equipment.
 
-This doc is the harness-and-quirks playbook. It's what gets wired up in the
-`tests/Driver.Modbus.IntegrationTests` project when we ship that (PR 26 candidate).
+This doc is the harness-and-quirks playbook. The project it describes lives at
+`tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/` — scaffolded in PR 30 with
+the simulator fixture, DL205 profile stub, and one write/read smoke test. Each
+confirmed DL205 quirk lands in a follow-up PR as a named test in that project.
 
 ## Harness
 
-**Chosen simulator: ModbusPal** (Java, scriptable). Rationale:
-- Scriptable enough to mimic device-specific behaviors (non-standard register
-  layouts, custom exception codes, intentional response delays).
-- Runs locally, no CI dependency. Tests skip when `localhost:502` (or the configured
-  simulator endpoint) isn't reachable.
-- Free + long-maintained — physical PLC bench is unavailable in most dev
-  environments, and renting cloud PLCs isn't worth the per-test cost.
+**Chosen simulator: pymodbus 3.13.0** (`pip install 'pymodbus[simulator]==3.13.0'`).
+Replaced ModbusPal in PR 43 — see `tests/.../Pymodbus/README.md` for the
+trade-off rationale. Headline reasons:
 
-**Setup pattern** (not yet codified in a script — will land alongside the integration
-test project):
-1. Install ModbusPal, load the per-device `.xmpp` profile from
-   `tests/Driver.Modbus.IntegrationTests/ModbusPal/` (TBD directory).
-2. Start the simulator listening on `localhost:502` (or override via
-   `MODBUS_SIM_ENDPOINT` env var).
-3. `dotnet test` the integration project — tests auto-skip when the endpoint is
-   unreachable, so forgetting to start the simulator doesn't wedge CI.
+- **Headless** pure-Python CLI; no Java GUI, runs cleanly on a CI runner.
+- **Maintained** — current stable 3.13.0; ModbusPal 1.6b is abandoned.
+- **All four standard tables** (HR, IR, coils, DI) configurable; ModbusPal
+  1.6b only exposed HR + coils.
+- **Built-in actions** (`increment`, `random`, `timestamp`, `uptime`) +
+  optional custom-Python actions for declarative dynamic behaviors.
+- **Per-register raw uint16 seeding** — encoding the DL205 string-byte-order
+  / BCD / CDAB-float quirks stays explicit (the quirk math lives in the
+  `_quirk` JSON-comment fields next to each register).
+- Pip-installable on Windows; sidesteps the privileged-port admin
+  requirement by defaulting to TCP **5020** instead of 502.
+
+**Setup pattern**:
+1. `pip install "pymodbus[simulator]==3.13.0"`.
+2. Start the simulator with one of the in-repo profiles:
+   `tests\.../Pymodbus\serve.ps1 -Profile standard` (or `-Profile dl205`).
+3. `dotnet test tests\ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests` —
+   tests auto-skip when the endpoint is unreachable. Default endpoint is
+   `localhost:5020`; override via `MODBUS_SIM_ENDPOINT` for a real PLC on its
+   native port 502.
 
 ## Per-device quirk catalog
 
-### AutomationDirect DL205
+### AutomationDirect DL205 / DL260
 
-First known target device. Quirks to document and cover with named tests (to be
-filled in when user validates each behavior in ModbusPal with a DL205 profile):
+First known target device family. **Full quirk catalog with primary-source citations
+and per-quirk integration-test names lives at [`dl205.md`](dl205.md)** — that doc is
+the reference; this section is the testing roadmap.
 
-- **Word order for 32-bit values**: _pending_ — confirm whether DL205 uses ABCD
-  (Modbus TCP standard) or CDAB (Siemens-style word-swap) for Int32/UInt32/Float32.
-  Test name: `DL205_Float32_word_order_is_CDAB` (or `ABCD`, whichever proves out).
-- **Register-zero access**: _pending_ — some DL205 configurations reject FC03 at
-  register 0 with exception code 02 (illegal data address). If confirmed, the
-  integration test suite verifies `ModbusProbeOptions.ProbeAddress` default of 0
-  triggers the rejection and operators must override; test name:
-  `DL205_FC03_at_register_0_returns_IllegalDataAddress`.
-- **Coil addressing base**: _pending_ — DL205 documentation sometimes uses 1-based
-  coil addresses; verify the driver's zero-based addressing matches the physical
-  PLC without an off-by-one adjustment.
-- **Maximum registers per FC03**: _pending_ — Modbus spec caps at 125; some DL205
-  models enforce a lower limit (e.g., 64). Test name:
-  `DL205_FC03_beyond_max_registers_returns_IllegalDataValue`.
-- **Response framing under sustained load**: _pending_ — the driver's
-  single-flight semaphore assumes the server pairs requests/responses by
-  transaction id; at least one DL205 firmware revision is reported to drop the
-  TxId under load. If reproduced in ModbusPal we add a retry + log-and-continue
-  path to `ModbusTcpTransport`.
-- **Exception code on coil write to a protected bit**: _pending_ — some DL205
-  setups protect internal coils; the driver should surface the PLC's exception
-  PDU as `BadNotWritable` rather than `BadInternalError`.
+Confirmed quirks (priority order — top items are highest-impact for our driver
+and ship first as PR 41+):
 
-_User action item_: as each quirk is validated in ModbusPal, replace the _pending_
-marker with the confirmed behavior and file a named test in the integration suite.
+| Quirk | Driver impact | Integration-test name |
+|---|---|---|
+| **String packing**: 2 chars/register, **first char in low byte** (opposite of generic Modbus) | `ModbusDataType.String` decoder must be configurable per-device family — current code assumes high-byte-first | `DL205_String_low_byte_first_within_register` |
+| **Word order CDAB** for Int32/UInt32/Float32 | Already configurable via `ModbusByteOrder.WordSwap`; default per device profile | `DL205_Int32_word_order_is_CDAB` |
+| **BCD-as-default** numeric storage (only IEEE 754 when ladder uses `R` type) | New decoder mode — register reads as `0x1234` for ladder value `1234`, not as decimal `4660` | `DL205_BCD_register_decodes_as_hex_nibbles` |
+| **FC16 capped at 100 registers** (below the spec's 123) | Bulk-write batching must cap per-device-family | `DL205_FC16_101_registers_returns_IllegalDataValue` |
+| **FC03/04 capped at 128** (above the spec's 125) | Less impactful — clients that respect the spec's 125 stay safe | `DL205_FC03_129_registers_returns_IllegalDataValue` |
+| **V-memory octal-to-decimal addressing** (V2000 octal → 0x0400 decimal) | New address-format helper in profile config so operators can write `V2000` instead of computing `1024` themselves | `DL205_Vmem_V2000_maps_to_PDU_0x0400` |
+| **C-relay → coil 3072 / Y-output → coil 2048** offsets | Hard-coded constants in DL205 device profile | `DL205_C0_maps_to_coil_3072`, `DL205_Y0_maps_to_coil_2048` |
+| **Register 0 is valid** (rejects-register-0 rumour was DL05/DL06 relative-mode artefact) | None — current default is safe | `DL205_FC03_register_0_returns_V0_contents` |
+| **Max 4 simultaneous TCP clients** on H2-ECOM100 | Connect-time: handle TCP-accept failure with a clearer error message | `DL205_5th_TCP_connection_refused` |
+| **No TCP keepalive** | Driver-side periodic-probe (already wired via `IHostConnectivityProbe`) | _Covered by existing `ModbusProbeTests`_ |
+| **No mid-stream resync on malformed MBAP** | Already covered — single-flight + reconnect-on-error | _Covered by existing `ModbusDriverTests`_ |
+| **Write-protect exception code: `02` newer / `04` older** | Translate either to `BadNotWritable` | `DL205_FC06_in_ProgramMode_returns_ServerFailure` |
+
+_Operator-reported / unconfirmed_ — covered defensively in the driver but no
+integration tests until reproduced on hardware:
+- TxId drop under load (forum rumour; not reproduced).
+- Pre-2004 firmware ABCD word order (every shipped DL205/DL260 since 2004 is CDAB).
 
 ### Future devices
 
@@ -87,17 +95,27 @@ vendors get promoted into driver defaults or opt-in options:
   protocol end-to-end. The in-memory `FakeTransport` from the unit test suite is
   deliberately not used here — its value is speed + determinism, which doesn't
   help reproduce device-specific issues.
-- **Don't depend on ModbusPal state between tests.** Each test resets the
+- **Don't depend on simulator state between tests.** Each test resets the
   simulator's register bank or uses a unique address range. Avoid relying on
   "previous test left value at register 10" setups that flake when tests run in
-  parallel or re-order.
+  parallel or re-order. Either the test mutates the scratch ranges and restores
+  on finally, or it uses pymodbus's REST API to reset state between facts.
 
 ## Next concrete PRs
 
-- **PR 26 — Integration test project + DL205 profile scaffold**: creates
-  `tests/Driver.Modbus.IntegrationTests`, imports the ModbusPal profile (or
-  generates it from JSON), adds the fixture with skip-when-unreachable, plus
-  one smoke test that reads a register. No DL205-specific assertions yet — that
-  waits for the user to validate each quirk.
-- **PR 27+**: one PR per confirmed DL205 quirk, landing the named test + any
-  driver-side adjustment (e.g., retry on dropped TxId) needed to pass it.
+- **PR 30 — Integration test project + DL205 profile scaffold** — **DONE**.
+  Shipped `tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests` with
+  `ModbusSimulatorFixture` (TCP-probe, skips with a clear `SkipReason` when the
+  endpoint is unreachable), `DL205/DL205Profile.cs` (tag map stub), and
+  `DL205/DL205SmokeTests.cs` (write-then-read round-trip).
+- **PR 41 — DL205 quirk catalog doc** — **DONE**. `docs/v2/dl205.md`
+  documents every DL205/DL260 Modbus divergence with primary-source citations.
+- **PR 42 — ModbusPal `.xmpp` profiles** — **SUPERSEDED by PR 43**. Replaced
+  with pymodbus JSON because ModbusPal 1.6b is abandoned, GUI-only, and only
+  exposes 2 of the 4 standard tables.
+- **PR 43 — pymodbus JSON profiles** — **DONE**. `Pymodbus/standard.json` +
+  `Pymodbus/dl205.json` + `Pymodbus/serve.ps1` runner. Both bind TCP 5020.
+- **PR 44+**: one PR per confirmed DL205 quirk, landing the named test + any
+  driver-side adjustment (string byte order, BCD decoder, V-memory address
+  helper, FC16 cap-per-device-family) needed to pass it. Each quirk's value
+  is already pre-encoded in `Pymodbus/dl205.json`.

src/ZB.MOM.WW.OtOpcUa.Admin/Components/Layout/MainLayout.razor

@@ -6,6 +6,7 @@
         <ul class="nav flex-column">
             <li class="nav-item"><a class="nav-link text-light" href="/">Overview</a></li>
             <li class="nav-item"><a class="nav-link text-light" href="/fleet">Fleet status</a></li>
+            <li class="nav-item"><a class="nav-link text-light" href="/hosts">Host status</a></li>
             <li class="nav-item"><a class="nav-link text-light" href="/clusters">Clusters</a></li>
             <li class="nav-item"><a class="nav-link text-light" href="/reservations">Reservations</a></li>
             <li class="nav-item"><a class="nav-link text-light" href="/certificates">Certificates</a></li>

src/ZB.MOM.WW.OtOpcUa.Admin/Components/Pages/Hosts.razor

@@ -0,0 +1,160 @@
+@page "/hosts"
+@using Microsoft.EntityFrameworkCore
+@using ZB.MOM.WW.OtOpcUa.Admin.Services
+@using ZB.MOM.WW.OtOpcUa.Configuration.Enums
+@inject IServiceScopeFactory ScopeFactory
+@implements IDisposable
+
+<h1 class="mb-4">Driver host status</h1>
+
+<div class="d-flex align-items-center mb-3 gap-2">
+    <button class="btn btn-sm btn-outline-primary" @onclick="RefreshAsync" disabled="@_refreshing">
+        @if (_refreshing) { <span class="spinner-border spinner-border-sm me-1" /> }
+        Refresh
+    </button>
+    <span class="text-muted small">
+        Auto-refresh every @RefreshIntervalSeconds s. Last updated: @(_lastRefreshUtc?.ToString("HH:mm:ss 'UTC'") ?? "—")
+    </span>
+</div>
+
+<div class="alert alert-info small mb-4">
+    Each row is one host reported by a driver instance on a server node. Galaxy drivers report
+    per-Platform / per-AppEngine entries; Modbus drivers report the PLC endpoint. Rows age out
+    of the Server's publisher on every 10-second heartbeat — rows whose LastSeen is older than
+    30s are flagged Stale, which usually means the owning Server process has crashed or lost
+    its DB connection.
+</div>
+
+@if (_rows is null)
+{
+    <p>Loading…</p>
+}
+else if (_rows.Count == 0)
+{
+    <div class="alert alert-secondary">
+        No host-status rows yet. The Server publishes its first tick 2s after startup; if this list stays empty, check that the Server is running and the driver implements <code>IHostConnectivityProbe</code>.
+    </div>
+}
+else
+{
+    <div class="row g-3 mb-4">
+        <div class="col-md-3"><div class="card"><div class="card-body">
+            <h6 class="text-muted mb-1">Hosts</h6>
+            <div class="fs-3">@_rows.Count</div>
+        </div></div></div>
+        <div class="col-md-3"><div class="card border-success"><div class="card-body">
+            <h6 class="text-muted mb-1">Running</h6>
+            <div class="fs-3 text-success">@_rows.Count(r => r.State == DriverHostState.Running && !HostStatusService.IsStale(r))</div>
+        </div></div></div>
+        <div class="col-md-3"><div class="card border-warning"><div class="card-body">
+            <h6 class="text-muted mb-1">Stale</h6>
+            <div class="fs-3 text-warning">@_rows.Count(HostStatusService.IsStale)</div>
+        </div></div></div>
+        <div class="col-md-3"><div class="card border-danger"><div class="card-body">
+            <h6 class="text-muted mb-1">Faulted</h6>
+            <div class="fs-3 text-danger">@_rows.Count(r => r.State == DriverHostState.Faulted)</div>
+        </div></div></div>
+    </div>
+
+    @foreach (var cluster in _rows.GroupBy(r => r.ClusterId ?? "(unassigned)").OrderBy(g => g.Key))
+    {
+        <h2 class="h5 mt-4">Cluster: <code>@cluster.Key</code></h2>
+        <table class="table table-sm table-hover align-middle">
+            <thead>
+                <tr>
+                    <th>Node</th>
+                    <th>Driver</th>
+                    <th>Host</th>
+                    <th>State</th>
+                    <th>Last transition</th>
+                    <th>Last seen</th>
+                    <th>Detail</th>
+                </tr>
+            </thead>
+            <tbody>
+            @foreach (var r in cluster)
+            {
+                <tr class="@RowClass(r)">
+                    <td><code>@r.NodeId</code></td>
+                    <td><code>@r.DriverInstanceId</code></td>
+                    <td>@r.HostName</td>
+                    <td>
+                        <span class="badge @StateBadge(r.State)">@r.State</span>
+                        @if (HostStatusService.IsStale(r))
+                        {
+                            <span class="badge bg-warning text-dark ms-1">Stale</span>
+                        }
+                    </td>
+                    <td class="small">@FormatAge(r.StateChangedUtc)</td>
+                    <td class="small @(HostStatusService.IsStale(r) ? "text-warning" : "")">@FormatAge(r.LastSeenUtc)</td>
+                    <td class="text-truncate small" style="max-width: 320px;" title="@r.Detail">@r.Detail</td>
+                </tr>
+            }
+            </tbody>
+        </table>
+    }
+}
+
+@code {
+    // Mirrors HostStatusPublisher.HeartbeatInterval — polling ahead of the broadcaster
+    // produces stale-looking rows mid-cycle.
+    private const int RefreshIntervalSeconds = 10;
+
+    private List<HostStatusRow>? _rows;
+    private bool _refreshing;
+    private DateTime? _lastRefreshUtc;
+    private Timer? _timer;
+
+    protected override async Task OnInitializedAsync()
+    {
+        await RefreshAsync();
+        _timer = new Timer(async _ => await InvokeAsync(RefreshAsync),
+            state: null,
+            dueTime: TimeSpan.FromSeconds(RefreshIntervalSeconds),
+            period: TimeSpan.FromSeconds(RefreshIntervalSeconds));
+    }
+
+    private async Task RefreshAsync()
+    {
+        if (_refreshing) return;
+        _refreshing = true;
+        try
+        {
+            using var scope = ScopeFactory.CreateScope();
+            var svc = scope.ServiceProvider.GetRequiredService<HostStatusService>();
+            _rows = (await svc.ListAsync()).ToList();
+            _lastRefreshUtc = DateTime.UtcNow;
+        }
+        finally
+        {
+            _refreshing = false;
+            StateHasChanged();
+        }
+    }
+
+    private static string RowClass(HostStatusRow r) => r.State switch
+    {
+        DriverHostState.Faulted => "table-danger",
+        _ when HostStatusService.IsStale(r) => "table-warning",
+        _ => "",
+    };
+
+    private static string StateBadge(DriverHostState s) => s switch
+    {
+        DriverHostState.Running => "bg-success",
+        DriverHostState.Stopped => "bg-secondary",
+        DriverHostState.Faulted => "bg-danger",
+        _ => "bg-secondary",
+    };
+
+    private static string FormatAge(DateTime t)
+    {
+        var age = DateTime.UtcNow - t;
+        if (age.TotalSeconds < 60) return $"{(int)age.TotalSeconds}s ago";
+        if (age.TotalMinutes < 60) return $"{(int)age.TotalMinutes}m ago";
+        if (age.TotalHours < 24) return $"{(int)age.TotalHours}h ago";
+        return t.ToString("yyyy-MM-dd HH:mm 'UTC'");
+    }
+
+    public void Dispose() => _timer?.Dispose();
+}

src/ZB.MOM.WW.OtOpcUa.Admin/Program.cs

@@ -47,6 +47,7 @@ builder.Services.AddScoped<NodeAclService>();
 builder.Services.AddScoped<ReservationService>();
 builder.Services.AddScoped<DraftValidationService>();
 builder.Services.AddScoped<AuditLogService>();
+builder.Services.AddScoped<HostStatusService>();
 
 // Cert-trust management — reads the OPC UA server's PKI store root so rejected client certs
 // can be promoted to trusted via the Admin UI. Singleton: no per-request state, just

src/ZB.MOM.WW.OtOpcUa.Admin/Services/HostStatusService.cs

@@ -0,0 +1,63 @@
+using Microsoft.EntityFrameworkCore;
+using ZB.MOM.WW.OtOpcUa.Configuration;
+using ZB.MOM.WW.OtOpcUa.Configuration.Entities;
+using ZB.MOM.WW.OtOpcUa.Configuration.Enums;
+
+namespace ZB.MOM.WW.OtOpcUa.Admin.Services;
+
+/// <summary>
+///     One row per <see cref="DriverHostStatus"/> record, enriched with the owning
+///     <c>ClusterNode.ClusterId</c> when available (left-join). The Admin <c>/hosts</c> page
+///     groups by cluster and renders a per-node → per-driver → per-host tree.
+/// </summary>
+public sealed record HostStatusRow(
+    string NodeId,
+    string? ClusterId,
+    string DriverInstanceId,
+    string HostName,
+    DriverHostState State,
+    DateTime StateChangedUtc,
+    DateTime LastSeenUtc,
+    string? Detail);
+
+/// <summary>
+///     Read-side service for the Admin UI's per-host drill-down. Loads
+///     <see cref="DriverHostStatus"/> rows (written by the Server process's
+///     <c>HostStatusPublisher</c>) and left-joins <c>ClusterNode</c> so each row knows which
+///     cluster it belongs to — the Admin UI groups by cluster for the fleet-wide view.
+/// </summary>
+/// <remarks>
+///     The publisher heartbeat is 10s (<c>HostStatusPublisher.HeartbeatInterval</c>). The
+///     Admin page also polls every ~10s and treats rows with <c>LastSeenUtc</c> older than
+///     <c>StaleThreshold</c> (30s) as stale — covers a missed heartbeat tolerance plus
+///     a generous buffer for clock skew and publisher GC pauses.
+/// </remarks>
+public sealed class HostStatusService(OtOpcUaConfigDbContext db)
+{
+    public static readonly TimeSpan StaleThreshold = TimeSpan.FromSeconds(30);
+
+    public async Task<IReadOnlyList<HostStatusRow>> ListAsync(CancellationToken ct = default)
+    {
+        // LEFT JOIN on NodeId so a row persists even when its owning ClusterNode row hasn't
+        // been created yet (first-boot bootstrap case — keeps the UI from losing sight of
+        // the reporting server).
+        var rows = await (from s in db.DriverHostStatuses.AsNoTracking()
+                          join n in db.ClusterNodes.AsNoTracking()
+                              on s.NodeId equals n.NodeId into nodeJoin
+                          from n in nodeJoin.DefaultIfEmpty()
+                          orderby s.NodeId, s.DriverInstanceId, s.HostName
+                          select new HostStatusRow(
+                              s.NodeId,
+                              n != null ? n.ClusterId : null,
+                              s.DriverInstanceId,
+                              s.HostName,
+                              s.State,
+                              s.StateChangedUtc,
+                              s.LastSeenUtc,
+                              s.Detail)).ToListAsync(ct);
+        return rows;
+    }
+
+    public static bool IsStale(HostStatusRow row) =>
+        DateTime.UtcNow - row.LastSeenUtc > StaleThreshold;
+}

src/ZB.MOM.WW.OtOpcUa.Configuration/Entities/DriverHostStatus.cs

@@ -0,0 +1,61 @@
+using ZB.MOM.WW.OtOpcUa.Configuration.Enums;
+
+namespace ZB.MOM.WW.OtOpcUa.Configuration.Entities;
+
+/// <summary>
+///     Per-host connectivity snapshot the Server publishes for each driver's
+///     <c>IHostConnectivityProbe.GetHostStatuses</c> entry. One row per
+///     (<see cref="NodeId"/>, <see cref="DriverInstanceId"/>, <see cref="HostName"/>) triple —
+///     a redundant 2-node cluster with one Galaxy driver reporting 3 platforms produces 6
+///     rows, not 3, because each server node owns its own runtime view.
+/// </summary>
+/// <remarks>
+///     <para>
+///         Closes the data-layer piece of LMX follow-up #7 (per-AppEngine Admin dashboard
+///         drill-down). The publisher hosted service on the Server side subscribes to every
+///         registered driver's <c>OnHostStatusChanged</c> and upserts rows on transitions +
+///         periodic liveness heartbeats. <see cref="LastSeenUtc"/> advances on every
+///         heartbeat so the Admin UI can flag stale rows from a crashed Server.
+///     </para>
+///     <para>
+///         No foreign-key to <see cref="ClusterNode"/> — a Server may start reporting host
+///         status before its ClusterNode row exists (e.g. first-boot bootstrap), and we'd
+///         rather keep the status row than drop it. The Admin-side service left-joins on
+///         NodeId when presenting rows.
+///     </para>
+/// </remarks>
+public sealed class DriverHostStatus
+{
+    /// <summary>Server node that's running the driver.</summary>
+    public required string NodeId { get; set; }
+
+    /// <summary>Driver instance's stable id (matches <c>IDriver.DriverInstanceId</c>).</summary>
+    public required string DriverInstanceId { get; set; }
+
+    /// <summary>
+    ///     Driver-side host identifier — Galaxy Platform / AppEngine name, Modbus
+    ///     <c>host:port</c>, whatever the probe returns. Opaque to the Admin UI except as
+    ///     a display string.
+    /// </summary>
+    public required string HostName { get; set; }
+
+    public DriverHostState State { get; set; } = DriverHostState.Unknown;
+
+    /// <summary>Timestamp of the last state transition (not of the most recent heartbeat).</summary>
+    public DateTime StateChangedUtc { get; set; }
+
+    /// <summary>
+    ///     Advances on every publisher heartbeat — the Admin UI uses
+    ///     <c>now - LastSeenUtc &gt; threshold</c> to flag rows whose owning Server has
+    ///     stopped reporting (crashed, network-partitioned, etc.), independent of
+    ///     <see cref="State"/>.
+    /// </summary>
+    public DateTime LastSeenUtc { get; set; }
+
+    /// <summary>
+    ///     Optional human-readable detail populated when <see cref="State"/> is
+    ///     <see cref="DriverHostState.Faulted"/> — e.g. the exception message from the
+    ///     driver's probe. Null for Running / Stopped / Unknown transitions.
+    /// </summary>
+    public string? Detail { get; set; }
+}

src/ZB.MOM.WW.OtOpcUa.Configuration/Enums/DriverHostState.cs

@@ -0,0 +1,21 @@
+namespace ZB.MOM.WW.OtOpcUa.Configuration.Enums;
+
+/// <summary>
+///     Persisted mirror of <c>Core.Abstractions.HostState</c> — the lifecycle state each
+///     <c>IHostConnectivityProbe</c>-capable driver reports for its per-host topology
+///     (Galaxy Platforms / AppEngines, Modbus PLC endpoints, future OPC UA gateway upstreams).
+///     Defined here instead of re-using <c>Core.Abstractions.HostState</c> so the
+///     Configuration project stays free of driver-runtime dependencies.
+/// </summary>
+/// <remarks>
+///     The server-side publisher (follow-up PR) translates
+///     <c>HostStatusChangedEventArgs.NewState</c> to this enum on every transition and
+///     upserts into <see cref="Entities.DriverHostStatus"/>. Admin UI reads from the DB.
+/// </remarks>
+public enum DriverHostState
+{
+    Unknown,
+    Running,
+    Stopped,
+    Faulted,
+}

src/ZB.MOM.WW.OtOpcUa.Configuration/Migrations/20260418193608_AddDriverHostStatus.cs

@@ -0,0 +1,49 @@
+using System;
+using Microsoft.EntityFrameworkCore.Migrations;
+
+#nullable disable
+
+namespace ZB.MOM.WW.OtOpcUa.Configuration.Migrations
+{
+    /// <inheritdoc />
+    public partial class AddDriverHostStatus : Migration
+    {
+        /// <inheritdoc />
+        protected override void Up(MigrationBuilder migrationBuilder)
+        {
+            migrationBuilder.CreateTable(
+                name: "DriverHostStatus",
+                columns: table => new
+                {
+                    NodeId = table.Column<string>(type: "nvarchar(64)", maxLength: 64, nullable: false),
+                    DriverInstanceId = table.Column<string>(type: "nvarchar(64)", maxLength: 64, nullable: false),
+                    HostName = table.Column<string>(type: "nvarchar(256)", maxLength: 256, nullable: false),
+                    State = table.Column<string>(type: "nvarchar(16)", maxLength: 16, nullable: false),
+                    StateChangedUtc = table.Column<DateTime>(type: "datetime2(3)", nullable: false),
+                    LastSeenUtc = table.Column<DateTime>(type: "datetime2(3)", nullable: false),
+                    Detail = table.Column<string>(type: "nvarchar(1024)", maxLength: 1024, nullable: true)
+                },
+                constraints: table =>
+                {
+                    table.PrimaryKey("PK_DriverHostStatus", x => new { x.NodeId, x.DriverInstanceId, x.HostName });
+                });
+
+            migrationBuilder.CreateIndex(
+                name: "IX_DriverHostStatus_LastSeen",
+                table: "DriverHostStatus",
+                column: "LastSeenUtc");
+
+            migrationBuilder.CreateIndex(
+                name: "IX_DriverHostStatus_Node",
+                table: "DriverHostStatus",
+                column: "NodeId");
+        }
+
+        /// <inheritdoc />
+        protected override void Down(MigrationBuilder migrationBuilder)
+        {
+            migrationBuilder.DropTable(
+                name: "DriverHostStatus");
+        }
+    }
+}

src/ZB.MOM.WW.OtOpcUa.Configuration/Migrations/OtOpcUaConfigDbContextModelSnapshot.cs

@@ -332,6 +332,46 @@ namespace ZB.MOM.WW.OtOpcUa.Configuration.Migrations
                         });
                 });
 
+            modelBuilder.Entity("ZB.MOM.WW.OtOpcUa.Configuration.Entities.DriverHostStatus", b =>
+                {
+                    b.Property<string>("NodeId")
+                        .HasMaxLength(64)
+                        .HasColumnType("nvarchar(64)");
+
+                    b.Property<string>("DriverInstanceId")
+                        .HasMaxLength(64)
+                        .HasColumnType("nvarchar(64)");
+
+                    b.Property<string>("HostName")
+                        .HasMaxLength(256)
+                        .HasColumnType("nvarchar(256)");
+
+                    b.Property<string>("Detail")
+                        .HasMaxLength(1024)
+                        .HasColumnType("nvarchar(1024)");
+
+                    b.Property<DateTime>("LastSeenUtc")
+                        .HasColumnType("datetime2(3)");
+
+                    b.Property<string>("State")
+                        .IsRequired()
+                        .HasMaxLength(16)
+                        .HasColumnType("nvarchar(16)");
+
+                    b.Property<DateTime>("StateChangedUtc")
+                        .HasColumnType("datetime2(3)");
+
+                    b.HasKey("NodeId", "DriverInstanceId", "HostName");
+
+                    b.HasIndex("LastSeenUtc")
+                        .HasDatabaseName("IX_DriverHostStatus_LastSeen");
+
+                    b.HasIndex("NodeId")
+                        .HasDatabaseName("IX_DriverHostStatus_Node");
+
+                    b.ToTable("DriverHostStatus", (string)null);
+                });
+
             modelBuilder.Entity("ZB.MOM.WW.OtOpcUa.Configuration.Entities.DriverInstance", b =>
                 {
                     b.Property<Guid>("DriverInstanceRowId")

src/ZB.MOM.WW.OtOpcUa.Configuration/OtOpcUaConfigDbContext.cs

@@ -27,6 +27,7 @@ public sealed class OtOpcUaConfigDbContext(DbContextOptions<OtOpcUaConfigDbConte
     public DbSet<ClusterNodeGenerationState> ClusterNodeGenerationStates => Set<ClusterNodeGenerationState>();
     public DbSet<ConfigAuditLog> ConfigAuditLogs => Set<ConfigAuditLog>();
     public DbSet<ExternalIdReservation> ExternalIdReservations => Set<ExternalIdReservation>();
+    public DbSet<DriverHostStatus> DriverHostStatuses => Set<DriverHostStatus>();
 
     protected override void OnModelCreating(ModelBuilder modelBuilder)
     {
@@ -47,6 +48,7 @@ public sealed class OtOpcUaConfigDbContext(DbContextOptions<OtOpcUaConfigDbConte
         ConfigureClusterNodeGenerationState(modelBuilder);
         ConfigureConfigAuditLog(modelBuilder);
         ConfigureExternalIdReservation(modelBuilder);
+        ConfigureDriverHostStatus(modelBuilder);
     }
 
     private static void ConfigureServerCluster(ModelBuilder modelBuilder)
@@ -484,4 +486,30 @@ public sealed class OtOpcUaConfigDbContext(DbContextOptions<OtOpcUaConfigDbConte
             e.HasIndex(x => x.EquipmentUuid).HasDatabaseName("IX_ExternalIdReservation_Equipment");
         });
     }
+
+    private static void ConfigureDriverHostStatus(ModelBuilder modelBuilder)
+    {
+        modelBuilder.Entity<DriverHostStatus>(e =>
+        {
+            e.ToTable("DriverHostStatus");
+            // Composite key — one row per (server node, driver instance, probe-reported host).
+            // A redundant 2-node cluster with one Galaxy driver reporting 3 platforms produces
+            // 6 rows because each server node owns its own runtime view; the composite key is
+            // what lets both views coexist without shadowing each other.
+            e.HasKey(x => new { x.NodeId, x.DriverInstanceId, x.HostName });
+            e.Property(x => x.NodeId).HasMaxLength(64);
+            e.Property(x => x.DriverInstanceId).HasMaxLength(64);
+            e.Property(x => x.HostName).HasMaxLength(256);
+            e.Property(x => x.State).HasConversion<string>().HasMaxLength(16);
+            e.Property(x => x.StateChangedUtc).HasColumnType("datetime2(3)");
+            e.Property(x => x.LastSeenUtc).HasColumnType("datetime2(3)");
+            e.Property(x => x.Detail).HasMaxLength(1024);
+
+            // NodeId-only index drives the Admin UI's per-cluster drill-down (select all host
+            // statuses for the nodes of a specific cluster via join on ClusterNode.ClusterId).
+            e.HasIndex(x => x.NodeId).HasDatabaseName("IX_DriverHostStatus_Node");
+            // LastSeenUtc index powers the Admin UI's stale-row query (now - LastSeen > N).
+            e.HasIndex(x => x.LastSeenUtc).HasDatabaseName("IX_DriverHostStatus_LastSeen");
+        });
+    }
 }

src/ZB.MOM.WW.OtOpcUa.Core.Abstractions/IHistoryProvider.cs

@@ -30,6 +30,52 @@ public interface IHistoryProvider
         TimeSpan interval,
         HistoryAggregateType aggregate,
         CancellationToken cancellationToken);
+
+    /// <summary>
+    ///     Read one sample per requested timestamp — OPC UA HistoryReadAtTime service. The
+    ///     driver interpolates (or returns the prior-boundary sample) when no exact match
+    ///     exists. Optional; drivers that can't interpolate throw <see cref="NotSupportedException"/>.
+    /// </summary>
+    /// <remarks>
+    ///     Default implementation throws. Drivers opt in by overriding; keeps existing
+    ///     <c>IHistoryProvider</c> implementations compiling without forcing a ReadAtTime path
+    ///     they may not have a backend for.
+    /// </remarks>
+    Task<HistoryReadResult> ReadAtTimeAsync(
+        string fullReference,
+        IReadOnlyList<DateTime> timestampsUtc,
+        CancellationToken cancellationToken)
+        => throw new NotSupportedException(
+            $"{GetType().Name} does not implement ReadAtTimeAsync. " +
+            "Drivers whose backends support at-time reads override this method.");
+
+    /// <summary>
+    ///     Read historical alarm/event records — OPC UA HistoryReadEvents service. Distinct
+    ///     from the live event stream — historical rows come from an event historian (Galaxy's
+    ///     Alarm Provider history log, etc.) rather than the driver's active subscription.
+    /// </summary>
+    /// <param name="sourceName">
+    ///     Optional filter: null means "all sources", otherwise restrict to events from that
+    ///     source-object name. Drivers may ignore the filter if the backend doesn't support it.
+    /// </param>
+    /// <param name="startUtc">Inclusive lower bound on <c>EventTimeUtc</c>.</param>
+    /// <param name="endUtc">Exclusive upper bound on <c>EventTimeUtc</c>.</param>
+    /// <param name="maxEvents">Upper cap on returned events — the driver's backend enforces this.</param>
+    /// <param name="cancellationToken">Request cancellation.</param>
+    /// <remarks>
+    ///     Default implementation throws. Only drivers with an event historian (Galaxy via the
+    ///     Wonderware Alarm &amp; Events log) override. Modbus / the OPC UA Client driver stay
+    ///     with the default and let callers see <c>BadHistoryOperationUnsupported</c>.
+    /// </remarks>
+    Task<HistoricalEventsResult> ReadEventsAsync(
+        string? sourceName,
+        DateTime startUtc,
+        DateTime endUtc,
+        int maxEvents,
+        CancellationToken cancellationToken)
+        => throw new NotSupportedException(
+            $"{GetType().Name} does not implement ReadEventsAsync. " +
+            "Drivers whose backends have an event historian override this method.");
 }
 
 /// <summary>Result of a HistoryRead call.</summary>
@@ -48,3 +94,29 @@ public enum HistoryAggregateType
     Total,
     Count,
 }
+
+/// <summary>
+///     One row returned by <see cref="IHistoryProvider.ReadEventsAsync"/> — a historical
+///     alarm/event record, not the OPC UA live-event stream. Fields match the minimum set the
+///     Server needs to populate a <c>HistoryEventFieldList</c> for HistoryReadEvents responses.
+/// </summary>
+/// <param name="EventId">Stable unique id for the event — driver-specific format.</param>
+/// <param name="SourceName">Source object that emitted the event. May differ from the <c>sourceName</c> filter the caller passed (fuzzy matches).</param>
+/// <param name="EventTimeUtc">Process-side timestamp — when the event actually occurred.</param>
+/// <param name="ReceivedTimeUtc">Historian-side timestamp — when the historian persisted the row; may lag <paramref name="EventTimeUtc"/> by the historian's buffer flush cadence.</param>
+/// <param name="Message">Human-readable message text.</param>
+/// <param name="Severity">OPC UA severity (1-1000). Drivers map their native priority scale onto this range.</param>
+public sealed record HistoricalEvent(
+    string EventId,
+    string? SourceName,
+    DateTime EventTimeUtc,
+    DateTime ReceivedTimeUtc,
+    string? Message,
+    ushort Severity);
+
+/// <summary>Result of a <see cref="IHistoryProvider.ReadEventsAsync"/> call.</summary>
+/// <param name="Events">Events in chronological order by <c>EventTimeUtc</c>.</param>
+/// <param name="ContinuationPoint">Opaque token for the next call when more events are available; null when complete.</param>
+public sealed record HistoricalEventsResult(
+    IReadOnlyList<HistoricalEvent> Events,
+    byte[]? ContinuationPoint);

src/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Proxy/GalaxyProxyDriver.cs

@@ -339,6 +339,64 @@ public sealed class GalaxyProxyDriver(GalaxyProxyOptions options)
         return new HistoryReadResult(samples, ContinuationPoint: null);
     }
 
+    public async Task<HistoryReadResult> ReadAtTimeAsync(
+        string fullReference, IReadOnlyList<DateTime> timestampsUtc, CancellationToken cancellationToken)
+    {
+        var client = RequireClient();
+        var resp = await client.CallAsync<HistoryReadAtTimeRequest, HistoryReadAtTimeResponse>(
+            MessageKind.HistoryReadAtTimeRequest,
+            new HistoryReadAtTimeRequest
+            {
+                SessionId = _sessionId,
+                TagReference = fullReference,
+                TimestampsUtcUnixMs = [.. timestampsUtc.Select(t => new DateTimeOffset(t, TimeSpan.Zero).ToUnixTimeMilliseconds())],
+            },
+            MessageKind.HistoryReadAtTimeResponse,
+            cancellationToken);
+
+        if (!resp.Success)
+            throw new InvalidOperationException($"Galaxy.Host HistoryReadAtTime failed: {resp.Error}");
+
+        // ReadAtTime returns one sample per requested timestamp in the same order — the Host
+        // pads with bad-quality snapshots when a timestamp can't be interpolated, so response
+        // length matches request length exactly. We trust that contract rather than
+        // re-aligning here, because the Host is the source-of-truth for interpolation policy.
+        IReadOnlyList<DataValueSnapshot> samples = [.. resp.Values.Select(ToSnapshot)];
+        return new HistoryReadResult(samples, ContinuationPoint: null);
+    }
+
+    public async Task<HistoricalEventsResult> ReadEventsAsync(
+        string? sourceName, DateTime startUtc, DateTime endUtc, int maxEvents, CancellationToken cancellationToken)
+    {
+        var client = RequireClient();
+        var resp = await client.CallAsync<HistoryReadEventsRequest, HistoryReadEventsResponse>(
+            MessageKind.HistoryReadEventsRequest,
+            new HistoryReadEventsRequest
+            {
+                SessionId = _sessionId,
+                SourceName = sourceName,
+                StartUtcUnixMs = new DateTimeOffset(startUtc, TimeSpan.Zero).ToUnixTimeMilliseconds(),
+                EndUtcUnixMs = new DateTimeOffset(endUtc, TimeSpan.Zero).ToUnixTimeMilliseconds(),
+                MaxEvents = maxEvents,
+            },
+            MessageKind.HistoryReadEventsResponse,
+            cancellationToken);
+
+        if (!resp.Success)
+            throw new InvalidOperationException($"Galaxy.Host HistoryReadEvents failed: {resp.Error}");
+
+        IReadOnlyList<HistoricalEvent> events = [.. resp.Events.Select(ToHistoricalEvent)];
+        return new HistoricalEventsResult(events, ContinuationPoint: null);
+    }
+
+    internal static HistoricalEvent ToHistoricalEvent(GalaxyHistoricalEvent wire) => new(
+        EventId: wire.EventId,
+        SourceName: wire.SourceName,
+        EventTimeUtc: DateTimeOffset.FromUnixTimeMilliseconds(wire.EventTimeUtcUnixMs).UtcDateTime,
+        ReceivedTimeUtc: DateTimeOffset.FromUnixTimeMilliseconds(wire.ReceivedTimeUtcUnixMs).UtcDateTime,
+        Message: wire.DisplayText,
+        Severity: wire.Severity);
+
     /// <summary>
     ///     Maps the OPC UA Part 13 aggregate enum onto the Wonderware Historian
     ///     AnalogSummaryQuery column names consumed by <c>HistorianDataSource.ReadAggregateAsync</c>.

src/ZB.MOM.WW.OtOpcUa.Driver.Modbus/DirectLogicAddress.cs

@@ -0,0 +1,165 @@
+namespace ZB.MOM.WW.OtOpcUa.Driver.Modbus;
+
+/// <summary>
+///     AutomationDirect DirectLOGIC address-translation helpers. DL205 / DL260 / DL350 CPUs
+///     address V-memory in OCTAL while the Modbus wire uses DECIMAL PDU addresses — operators
+///     see "V2000" in the PLC ladder-logic editor but the Modbus client must write PDU 0x0400.
+///     The formulas differ between user V-memory (simple octal-to-decimal) and system V-memory
+///     (fixed bank mappings), so the two cases are separate methods rather than one overloaded
+///     "ToPdu" call.
+/// </summary>
+/// <remarks>
+///     See <c>docs/v2/dl205.md</c> §V-memory for the full CPU-family matrix + rationale.
+///     References: D2-USER-M appendix (DL205/D2-260), H2-ECOM-M §6.5 (absolute vs relative
+///     addressing), AutomationDirect forum guidance on V40400 system-base.
+/// </remarks>
+public static class DirectLogicAddress
+{
+    /// <summary>
+    ///     Convert a DirectLOGIC user V-memory address (octal) to a 0-based Modbus PDU address.
+    ///     Accepts bare octal (<c>"2000"</c>) or <c>V</c>-prefixed (<c>"V2000"</c>). Range
+    ///     depends on CPU model — DL205 D2-260 user memory is V1400-V7377 + V10000-V17777
+    ///     octal, DL260 extends to V77777 octal.
+    /// </summary>
+    /// <exception cref="ArgumentException">Input is null / empty / contains non-octal digits (8,9).</exception>
+    /// <exception cref="OverflowException">Parsed value exceeds ushort.MaxValue (0xFFFF).</exception>
+    public static ushort UserVMemoryToPdu(string vAddress)
+    {
+        if (string.IsNullOrWhiteSpace(vAddress))
+            throw new ArgumentException("V-memory address must not be empty", nameof(vAddress));
+        var s = vAddress.Trim();
+        if (s[0] == 'V' || s[0] == 'v') s = s.Substring(1);
+        if (s.Length == 0)
+            throw new ArgumentException($"V-memory address '{vAddress}' has no digits", nameof(vAddress));
+
+        // Octal conversion. Reject 8/9 digits up-front — int.Parse in the obvious base would
+        // accept them silently because .NET has no built-in base-8 parser.
+        uint result = 0;
+        foreach (var ch in s)
+        {
+            if (ch < '0' || ch > '7')
+                throw new ArgumentException(
+                    $"V-memory address '{vAddress}' contains non-octal digit '{ch}' — DirectLOGIC V-addresses are octal (0-7)",
+                    nameof(vAddress));
+            result = result * 8 + (uint)(ch - '0');
+            if (result > ushort.MaxValue)
+                throw new OverflowException(
+                    $"V-memory address '{vAddress}' exceeds the 16-bit Modbus PDU address range");
+        }
+        return (ushort)result;
+    }
+
+    /// <summary>
+    ///     DirectLOGIC system V-memory starts at octal V40400 on DL260 / H2-ECOM100 in factory
+    ///     "absolute" addressing mode. Unlike user V-memory, the mapping is NOT a simple
+    ///     octal-to-decimal conversion — the CPU relocates the system bank to Modbus PDU 0x2100
+    ///     (decimal 8448). This helper returns the CPU-family base plus a user-supplied offset
+    ///     within the system bank.
+    /// </summary>
+    public const ushort SystemVMemoryBasePdu = 0x2100;
+
+    /// <param name="offsetWithinSystemBank">
+    ///     0-based register offset within the system bank. Pass 0 for V40400 itself; pass 1 for
+    ///     V40401 (octal), and so on. NOT an octal-decoded value — the system bank lives at
+    ///     consecutive PDU addresses, so the offset is plain decimal.
+    /// </param>
+    public static ushort SystemVMemoryToPdu(ushort offsetWithinSystemBank)
+    {
+        var pdu = SystemVMemoryBasePdu + offsetWithinSystemBank;
+        if (pdu > ushort.MaxValue)
+            throw new OverflowException(
+                $"System V-memory offset {offsetWithinSystemBank} maps past 0xFFFF");
+        return (ushort)pdu;
+    }
+
+    // Bit-memory bases per DL260 user manual §I/O-configuration.
+    // Numbers after X / Y / C / SP are OCTAL in DirectLOGIC notation. The Modbus base is
+    // added to the octal-decoded offset; e.g. Y017 = Modbus coil 2048 + octal(17) = 2048 + 15 = 2063.
+
+    /// <summary>
+    ///     DL260 Y-output coil base. Y0 octal → Modbus coil address 2048 (0-based).
+    /// </summary>
+    public const ushort YOutputBaseCoil = 2048;
+
+    /// <summary>
+    ///     DL260 C-relay coil base. C0 octal → Modbus coil address 3072 (0-based).
+    /// </summary>
+    public const ushort CRelayBaseCoil = 3072;
+
+    /// <summary>
+    ///     DL260 X-input discrete-input base. X0 octal → Modbus discrete input 0.
+    /// </summary>
+    public const ushort XInputBaseDiscrete = 0;
+
+    /// <summary>
+    ///     DL260 SP special-relay discrete-input base. SP0 octal → Modbus discrete input 1024.
+    ///     Read-only; writing SP relays is rejected with Illegal Data Address.
+    /// </summary>
+    public const ushort SpecialBaseDiscrete = 1024;
+
+    /// <summary>
+    ///     Translate a DirectLOGIC Y-output address (e.g. <c>"Y0"</c>, <c>"Y17"</c>) to its
+    ///     0-based Modbus coil address on DL260. The trailing number is OCTAL, matching the
+    ///     ladder-logic editor's notation.
+    /// </summary>
+    public static ushort YOutputToCoil(string yAddress) =>
+        AddOctalOffset(YOutputBaseCoil, StripPrefix(yAddress, 'Y'));
+
+    /// <summary>
+    ///     Translate a DirectLOGIC C-relay address (e.g. <c>"C0"</c>, <c>"C1777"</c>) to its
+    ///     0-based Modbus coil address.
+    /// </summary>
+    public static ushort CRelayToCoil(string cAddress) =>
+        AddOctalOffset(CRelayBaseCoil, StripPrefix(cAddress, 'C'));
+
+    /// <summary>
+    ///     Translate a DirectLOGIC X-input address (e.g. <c>"X0"</c>, <c>"X17"</c>) to its
+    ///     0-based Modbus discrete-input address. Reading an unpopulated X returns 0, not an
+    ///     exception — the CPU sizes the table to configured I/O, not installed modules.
+    /// </summary>
+    public static ushort XInputToDiscrete(string xAddress) =>
+        AddOctalOffset(XInputBaseDiscrete, StripPrefix(xAddress, 'X'));
+
+    /// <summary>
+    ///     Translate a DirectLOGIC SP-special-relay address (e.g. <c>"SP0"</c>) to its 0-based
+    ///     Modbus discrete-input address. Accepts <c>"SP"</c> prefix case-insensitively.
+    /// </summary>
+    public static ushort SpecialToDiscrete(string spAddress)
+    {
+        if (string.IsNullOrWhiteSpace(spAddress))
+            throw new ArgumentException("SP address must not be empty", nameof(spAddress));
+        var s = spAddress.Trim();
+        if (s.Length >= 2 && (s[0] == 'S' || s[0] == 's') && (s[1] == 'P' || s[1] == 'p'))
+            s = s.Substring(2);
+        return AddOctalOffset(SpecialBaseDiscrete, s);
+    }
+
+    private static string StripPrefix(string address, char expectedPrefix)
+    {
+        if (string.IsNullOrWhiteSpace(address))
+            throw new ArgumentException("Address must not be empty", nameof(address));
+        var s = address.Trim();
+        if (s.Length > 0 && char.ToUpperInvariant(s[0]) == char.ToUpperInvariant(expectedPrefix))
+            s = s.Substring(1);
+        return s;
+    }
+
+    private static ushort AddOctalOffset(ushort baseAddr, string octalDigits)
+    {
+        if (octalDigits.Length == 0)
+            throw new ArgumentException("Address has no digits", nameof(octalDigits));
+        uint offset = 0;
+        foreach (var ch in octalDigits)
+        {
+            if (ch < '0' || ch > '7')
+                throw new ArgumentException(
+                    $"Address contains non-octal digit '{ch}' — DirectLOGIC I/O addresses are octal (0-7)",
+                    nameof(octalDigits));
+            offset = offset * 8 + (uint)(ch - '0');
+        }
+        var result = baseAddr + offset;
+        if (result > ushort.MaxValue)
+            throw new OverflowException($"Address {baseAddr}+{offset} exceeds 0xFFFF");
+        return (ushort)result;
+    }
+}

src/ZB.MOM.WW.OtOpcUa.Driver.Modbus/ModbusDriver.cs

@@ -171,11 +171,14 @@ public sealed class ModbusDriver(ModbusDriverOptions options, string driverInsta
             {
                 var quantity = RegisterCount(tag);
                 var fc = tag.Region == ModbusRegion.HoldingRegisters ? (byte)0x03 : (byte)0x04;
-                var pdu = new byte[] { fc, (byte)(tag.Address >> 8), (byte)(tag.Address & 0xFF),
-                                       (byte)(quantity >> 8), (byte)(quantity & 0xFF) };
-                var resp = await transport.SendAsync(_options.UnitId, pdu, ct).ConfigureAwait(false);
-                // resp = [fc][byte-count][data...]
-                var data = new ReadOnlySpan<byte>(resp, 2, resp[1]);
+                // Auto-chunk when the tag's register span exceeds the caller-configured cap.
+                // Affects long strings (FC03/04 > 125 regs is spec-forbidden; DL205 caps at 128,
+                // Mitsubishi Q caps at 64). Non-string tags max out at 4 regs so the cap never
+                // triggers for numerics.
+                var cap = _options.MaxRegistersPerRead == 0 ? (ushort)125 : _options.MaxRegistersPerRead;
+                var data = quantity <= cap
+                    ? await ReadRegisterBlockAsync(transport, fc, tag.Address, quantity, ct).ConfigureAwait(false)
+                    : await ReadRegisterBlockChunkedAsync(transport, fc, tag.Address, quantity, cap, ct).ConfigureAwait(false);
                 return DecodeRegister(data, tag);
             }
             default:
@@ -183,6 +186,33 @@ public sealed class ModbusDriver(ModbusDriverOptions options, string driverInsta
         }
     }
 
+    private async Task<byte[]> ReadRegisterBlockAsync(
+        IModbusTransport transport, byte fc, ushort address, ushort quantity, CancellationToken ct)
+    {
+        var pdu = new byte[] { fc, (byte)(address >> 8), (byte)(address & 0xFF),
+                               (byte)(quantity >> 8), (byte)(quantity & 0xFF) };
+        var resp = await transport.SendAsync(_options.UnitId, pdu, ct).ConfigureAwait(false);
+        // resp = [fc][byte-count][data...]
+        var data = new byte[resp[1]];
+        Buffer.BlockCopy(resp, 2, data, 0, resp[1]);
+        return data;
+    }
+
+    private async Task<byte[]> ReadRegisterBlockChunkedAsync(
+        IModbusTransport transport, byte fc, ushort address, ushort totalRegs, ushort cap, CancellationToken ct)
+    {
+        var assembled = new byte[totalRegs * 2];
+        ushort done = 0;
+        while (done < totalRegs)
+        {
+            var chunk = (ushort)Math.Min(cap, totalRegs - done);
+            var chunkBytes = await ReadRegisterBlockAsync(transport, fc, (ushort)(address + done), chunk, ct).ConfigureAwait(false);
+            Buffer.BlockCopy(chunkBytes, 0, assembled, done * 2, chunkBytes.Length);
+            done += chunk;
+        }
+        return assembled;
+    }
+
     // ---- IWritable ----
 
     public async Task<IReadOnlyList<WriteResult>> WriteAsync(
@@ -239,8 +269,13 @@ public sealed class ModbusDriver(ModbusDriverOptions options, string driverInsta
                 }
                 else
                 {
-                    // FC 16 (Write Multiple Registers) for 32-bit types
+                    // FC 16 (Write Multiple Registers) for 32-bit types.
                     var qty = (ushort)(bytes.Length / 2);
+                    var writeCap = _options.MaxRegistersPerWrite == 0 ? (ushort)123 : _options.MaxRegistersPerWrite;
+                    if (qty > writeCap)
+                        throw new InvalidOperationException(
+                            $"Write of {qty} registers to {tag.Name} exceeds MaxRegistersPerWrite={writeCap}. " +
+                            $"Split the tag (e.g. shorter StringLength) — partial FC16 chunks would lose atomicity.");
                     var pdu = new byte[6 + 1 + bytes.Length];
                     pdu[0] = 0x10;
                     pdu[1] = (byte)(tag.Address >> 8); pdu[2] = (byte)(tag.Address & 0xFF);
@@ -404,8 +439,8 @@ public sealed class ModbusDriver(ModbusDriverOptions options, string driverInsta
     /// </summary>
     internal static ushort RegisterCount(ModbusTagDefinition tag) => tag.DataType switch
     {
-        ModbusDataType.Int16 or ModbusDataType.UInt16 or ModbusDataType.BitInRegister => 1,
-        ModbusDataType.Int32 or ModbusDataType.UInt32 or ModbusDataType.Float32 => 2,
+        ModbusDataType.Int16 or ModbusDataType.UInt16 or ModbusDataType.BitInRegister or ModbusDataType.Bcd16 => 1,
+        ModbusDataType.Int32 or ModbusDataType.UInt32 or ModbusDataType.Float32 or ModbusDataType.Bcd32 => 2,
         ModbusDataType.Int64 or ModbusDataType.UInt64 or ModbusDataType.Float64 => 4,
         ModbusDataType.String => (ushort)((tag.StringLength + 1) / 2), // 2 chars per register
         _ => throw new InvalidOperationException($"Non-register data type {tag.DataType}"),
@@ -435,6 +470,17 @@ public sealed class ModbusDriver(ModbusDriverOptions options, string driverInsta
         {
             case ModbusDataType.Int16: return BinaryPrimitives.ReadInt16BigEndian(data);
             case ModbusDataType.UInt16: return BinaryPrimitives.ReadUInt16BigEndian(data);
+            case ModbusDataType.Bcd16:
+            {
+                var raw = BinaryPrimitives.ReadUInt16BigEndian(data);
+                return (int)DecodeBcd(raw, nibbles: 4);
+            }
+            case ModbusDataType.Bcd32:
+            {
+                var b = NormalizeWordOrder(data, tag.ByteOrder);
+                var raw = BinaryPrimitives.ReadUInt32BigEndian(b);
+                return (int)DecodeBcd(raw, nibbles: 8);
+            }
             case ModbusDataType.BitInRegister:
             {
                 var raw = BinaryPrimitives.ReadUInt16BigEndian(data);
@@ -472,13 +518,21 @@ public sealed class ModbusDriver(ModbusDriverOptions options, string driverInsta
             }
             case ModbusDataType.String:
             {
-                // ASCII, 2 chars per register, packed high byte = first char.
-                // Respect the caller's StringLength (truncate nul-padded regions).
+                // ASCII, 2 chars per register. HighByteFirst (standard) packs the first char in
+                // the high byte of each register; LowByteFirst (DL205/DL260) packs the first char
+                // in the low byte. Respect StringLength (truncate nul-padded regions).
                 var chars = new char[tag.StringLength];
                 for (var i = 0; i < tag.StringLength; i++)
                 {
-                    var b = data[i];
-                    if (b == 0) { return new string(chars, 0, i); }
+                    var regIdx = i / 2;
+                    var highByte = data[regIdx * 2];
+                    var lowByte  = data[regIdx * 2 + 1];
+                    byte b;
+                    if (tag.StringByteOrder == ModbusStringByteOrder.HighByteFirst)
+                        b = (i % 2 == 0) ? highByte : lowByte;
+                    else
+                        b = (i % 2 == 0) ? lowByte : highByte;
+                    if (b == 0) return new string(chars, 0, i);
                     chars[i] = (char)b;
                 }
                 return new string(chars);
@@ -502,6 +556,21 @@ public sealed class ModbusDriver(ModbusDriverOptions options, string driverInsta
                 var v = Convert.ToUInt16(value);
                 var b = new byte[2]; BinaryPrimitives.WriteUInt16BigEndian(b, v); return b;
             }
+            case ModbusDataType.Bcd16:
+            {
+                var v = Convert.ToUInt32(value);
+                if (v > 9999) throw new OverflowException($"BCD16 value {v} exceeds 4 decimal digits");
+                var raw = (ushort)EncodeBcd(v, nibbles: 4);
+                var b = new byte[2]; BinaryPrimitives.WriteUInt16BigEndian(b, raw); return b;
+            }
+            case ModbusDataType.Bcd32:
+            {
+                var v = Convert.ToUInt32(value);
+                if (v > 99_999_999u) throw new OverflowException($"BCD32 value {v} exceeds 8 decimal digits");
+                var raw = EncodeBcd(v, nibbles: 8);
+                var b = new byte[4]; BinaryPrimitives.WriteUInt32BigEndian(b, raw);
+                return NormalizeWordOrder(b, tag.ByteOrder);
+            }
             case ModbusDataType.Int32:
             {
                 var v = Convert.ToInt32(value);
@@ -543,7 +612,14 @@ public sealed class ModbusDriver(ModbusDriverOptions options, string driverInsta
                 var s = Convert.ToString(value) ?? string.Empty;
                 var regs = (tag.StringLength + 1) / 2;
                 var b = new byte[regs * 2];
-                for (var i = 0; i < tag.StringLength && i < s.Length; i++) b[i] = (byte)s[i];
+                for (var i = 0; i < tag.StringLength && i < s.Length; i++)
+                {
+                    var regIdx = i / 2;
+                    var destIdx = tag.StringByteOrder == ModbusStringByteOrder.HighByteFirst
+                        ? (i % 2 == 0 ? regIdx * 2 : regIdx * 2 + 1)
+                        : (i % 2 == 0 ? regIdx * 2 + 1 : regIdx * 2);
+                    b[destIdx] = (byte)s[i];
+                }
                 // remaining bytes stay 0 — nul-padded per PLC convention
                 return b;
             }
@@ -564,9 +640,46 @@ public sealed class ModbusDriver(ModbusDriverOptions options, string driverInsta
         ModbusDataType.Float32 => DriverDataType.Float32,
         ModbusDataType.Float64 => DriverDataType.Float64,
         ModbusDataType.String => DriverDataType.String,
+        ModbusDataType.Bcd16 or ModbusDataType.Bcd32 => DriverDataType.Int32,
         _ => DriverDataType.Int32,
     };
 
+    /// <summary>
+    ///     Decode an N-nibble binary-coded-decimal value. Each nibble of <paramref name="raw"/>
+    ///     encodes one decimal digit (most-significant nibble first). Rejects nibbles &gt; 9 —
+    ///     the hardware sometimes produces garbage during transitions and silent non-BCD reads
+    ///     would quietly corrupt the caller's data.
+    /// </summary>
+    internal static uint DecodeBcd(uint raw, int nibbles)
+    {
+        uint result = 0;
+        for (var i = nibbles - 1; i >= 0; i--)
+        {
+            var digit = (raw >> (i * 4)) & 0xF;
+            if (digit > 9)
+                throw new InvalidDataException(
+                    $"Non-BCD nibble 0x{digit:X} at position {i} of raw=0x{raw:X}");
+            result = result * 10 + digit;
+        }
+        return result;
+    }
+
+    /// <summary>
+    ///     Encode a decimal value as N-nibble BCD. Caller is responsible for range-checking
+    ///     against the nibble capacity (10^nibbles - 1).
+    /// </summary>
+    internal static uint EncodeBcd(uint value, int nibbles)
+    {
+        uint result = 0;
+        for (var i = 0; i < nibbles; i++)
+        {
+            var digit = value % 10;
+            result |= digit << (i * 4);
+            value /= 10;
+        }
+        return result;
+    }
+
     private IModbusTransport RequireTransport() =>
         _transport ?? throw new InvalidOperationException("ModbusDriver not initialized");
 

src/ZB.MOM.WW.OtOpcUa.Driver.Modbus/ModbusDriverOptions.cs

@@ -25,6 +25,26 @@ public sealed class ModbusDriverOptions
     ///     <see cref="IHostConnectivityProbe"/>.
     /// </summary>
     public ModbusProbeOptions Probe { get; init; } = new();
+
+    /// <summary>
+    ///     Maximum registers per FC03 (Read Holding Registers) / FC04 (Read Input Registers)
+    ///     transaction. Modbus-TCP spec allows 125; many device families impose lower caps:
+    ///     AutomationDirect DL205/DL260 cap at <c>128</c>, Mitsubishi Q/FX3U cap at <c>64</c>,
+    ///     Omron CJ/CS cap at <c>125</c>. Set to the lowest cap across the devices this driver
+    ///     instance talks to; the driver auto-chunks larger reads into consecutive requests.
+    ///     Default <c>125</c> — the spec maximum, safe against any conforming server. Setting
+    ///     to <c>0</c> disables the cap (discouraged — the spec upper bound still applies).
+    /// </summary>
+    public ushort MaxRegistersPerRead { get; init; } = 125;
+
+    /// <summary>
+    ///     Maximum registers per FC16 (Write Multiple Registers) transaction. Spec maximum is
+    ///     <c>123</c>; DL205/DL260 cap at <c>100</c>. Matching caller-vs-device semantics:
+    ///     exceeding the cap currently throws (writes aren't auto-chunked because a partial
+    ///     write across two FC16 calls is no longer atomic — caller must explicitly opt in
+    ///     by shortening the tag's <c>StringLength</c> or splitting it into multiple tags).
+    /// </summary>
+    public ushort MaxRegistersPerWrite { get; init; } = 123;
 }
 
 public sealed class ModbusProbeOptions
@@ -55,6 +75,12 @@ public sealed class ModbusProbeOptions
 /// <param name="ByteOrder">Word ordering for multi-register types. Ignored for Bool / Int16 / UInt16 / BitInRegister / String.</param>
 /// <param name="BitIndex">For <c>DataType = BitInRegister</c>: which bit of the holding register (0-15, LSB-first).</param>
 /// <param name="StringLength">For <c>DataType = String</c>: number of ASCII characters (2 per register, rounded up).</param>
+/// <param name="StringByteOrder">
+///     Per-register byte order for <c>DataType = String</c>. Standard Modbus packs the first
+///     character in the high byte (<see cref="ModbusStringByteOrder.HighByteFirst"/>).
+///     AutomationDirect DirectLOGIC (DL205/DL260) and a few legacy families pack the first
+///     character in the low byte instead — see <c>docs/v2/dl205.md</c> §strings.
+/// </param>
 public sealed record ModbusTagDefinition(
     string Name,
     ModbusRegion Region,
@@ -63,7 +89,8 @@ public sealed record ModbusTagDefinition(
     bool Writable = true,
     ModbusByteOrder ByteOrder = ModbusByteOrder.BigEndian,
     byte BitIndex = 0,
-    ushort StringLength = 0);
+    ushort StringLength = 0,
+    ModbusStringByteOrder StringByteOrder = ModbusStringByteOrder.HighByteFirst);
 
 public enum ModbusRegion { Coils, DiscreteInputs, InputRegisters, HoldingRegisters }
 
@@ -82,6 +109,18 @@ public enum ModbusDataType
     BitInRegister,
     /// <summary>ASCII string packed 2 chars per register, <see cref="ModbusTagDefinition.StringLength"/> characters long.</summary>
     String,
+    /// <summary>
+    ///     16-bit binary-coded decimal. Each nibble encodes one decimal digit (0-9). Register
+    ///     value <c>0x1234</c> decodes as decimal <c>1234</c> — NOT binary <c>0x04D2 = 4660</c>.
+    ///     DL205/DL260 and several Mitsubishi / Omron families store timers, counters, and
+    ///     operator-facing numerics as BCD by default.
+    /// </summary>
+    Bcd16,
+    /// <summary>
+    ///     32-bit (two-register) BCD. Decodes 8 decimal digits. Word ordering follows
+    ///     <see cref="ModbusTagDefinition.ByteOrder"/> the same way <see cref="Int32"/> does.
+    /// </summary>
+    Bcd32,
 }
 
 /// <summary>
@@ -95,3 +134,17 @@ public enum ModbusByteOrder
     BigEndian,
     WordSwap,
 }
+
+/// <summary>
+///     Per-register byte order for ASCII strings packed 2 chars per register. Standard Modbus
+///     convention is <see cref="HighByteFirst"/> — the first character of each pair occupies
+///     the high byte of the register. AutomationDirect DirectLOGIC (DL205, DL260, DL350) and a
+///     handful of legacy controllers pack <see cref="LowByteFirst"/>, which inverts that within
+///     each register. Word ordering across multiple registers is always ascending address for
+///     strings — only the byte order inside each register flips.
+/// </summary>
+public enum ModbusStringByteOrder
+{
+    HighByteFirst,
+    LowByteFirst,
+}

src/ZB.MOM.WW.OtOpcUa.Driver.Modbus/ModbusTcpTransport.cs

@@ -28,10 +28,20 @@ public sealed class ModbusTcpTransport : IModbusTransport
 
     public async Task ConnectAsync(CancellationToken ct)
     {
-        _client = new TcpClient();
+        // Resolve the host explicitly + prefer IPv4. .NET's TcpClient default-constructor is
+        // dual-stack (IPv6 first, fallback to IPv4) — but most Modbus TCP devices (PLCs and
+        // simulators like pymodbus) bind 0.0.0.0 only, so the IPv6 attempt times out and we
+        // burn the entire ConnectAsync budget before even trying IPv4. Resolving first +
+        // dialing the IPv4 address directly sidesteps that.
+        var addresses = await System.Net.Dns.GetHostAddressesAsync(_host, ct).ConfigureAwait(false);
+        var ipv4 = System.Linq.Enumerable.FirstOrDefault(addresses,
+            a => a.AddressFamily == System.Net.Sockets.AddressFamily.InterNetwork);
+        var target = ipv4 ?? (addresses.Length > 0 ? addresses[0] : System.Net.IPAddress.Loopback);
+
+        _client = new TcpClient(target.AddressFamily);
         using var cts = CancellationTokenSource.CreateLinkedTokenSource(ct);
         cts.CancelAfter(_timeout);
-        await _client.ConnectAsync(_host, _port, cts.Token).ConfigureAwait(false);
+        await _client.ConnectAsync(target, _port, cts.Token).ConfigureAwait(false);
         _stream = _client.GetStream();
     }
 

src/ZB.MOM.WW.OtOpcUa.Server/HostStatusPublisher.cs

@@ -0,0 +1,143 @@
+using Microsoft.EntityFrameworkCore;
+using Microsoft.Extensions.DependencyInjection;
+using Microsoft.Extensions.Hosting;
+using Microsoft.Extensions.Logging;
+using ZB.MOM.WW.OtOpcUa.Configuration;
+using ZB.MOM.WW.OtOpcUa.Configuration.Entities;
+using ZB.MOM.WW.OtOpcUa.Configuration.Enums;
+using ZB.MOM.WW.OtOpcUa.Core.Abstractions;
+using ZB.MOM.WW.OtOpcUa.Core.Hosting;
+
+namespace ZB.MOM.WW.OtOpcUa.Server;
+
+/// <summary>
+///     Walks every registered driver once per heartbeat interval, asks each
+///     <see cref="IHostConnectivityProbe"/>-capable driver for its current
+///     <see cref="HostConnectivityStatus"/> list, and upserts one
+///     <see cref="DriverHostStatus"/> row per (NodeId, DriverInstanceId, HostName) into the
+///     central config DB. Powers the Admin UI's per-host drill-down page (LMX follow-up #7).
+/// </summary>
+/// <remarks>
+///     <para>
+///         Polling rather than event-driven: simpler, and matches the cadence the Admin UI
+///         consumes. An event-subscription optimization (push on <c>OnHostStatusChanged</c> for
+///         immediate reflection) is a straightforward follow-up but adds lifecycle complexity
+///         — drivers can be registered after the publisher starts, and subscribing to each
+///         one's event on register + unsubscribing on unregister requires DriverHost to expose
+///         lifecycle events it doesn't today.
+///     </para>
+///     <para>
+///         <see cref="DriverHostStatus.LastSeenUtc"/> advances every heartbeat so the Admin UI
+///         can flag stale rows from a crashed Server process independent of
+///         <see cref="DriverHostStatus.State"/> — a Faulted publisher that stops heartbeating
+///         stays Faulted in the DB but its LastSeenUtc ages out, which is the signal
+///         operators actually want.
+///     </para>
+///     <para>
+///         If the DB is unreachable on a given tick, the publisher logs and moves on — it
+///         does not retry or buffer. The next heartbeat picks up the current-state snapshot,
+///         which is more useful than replaying stale transitions after a long outage.
+///     </para>
+/// </remarks>
+public sealed class HostStatusPublisher(
+    DriverHost driverHost,
+    NodeOptions nodeOptions,
+    IServiceScopeFactory scopeFactory,
+    ILogger<HostStatusPublisher> logger) : BackgroundService
+{
+    internal static readonly TimeSpan HeartbeatInterval = TimeSpan.FromSeconds(10);
+
+    protected override async Task ExecuteAsync(CancellationToken stoppingToken)
+    {
+        // Wait a short moment at startup so NodeBootstrap's RegisterAsync calls have had a
+        // chance to land. First tick runs immediately after so a freshly-started Server
+        // surfaces its host topology in the Admin UI without waiting a full interval.
+        try { await Task.Delay(TimeSpan.FromSeconds(2), stoppingToken); }
+        catch (OperationCanceledException) { return; }
+
+        while (!stoppingToken.IsCancellationRequested)
+        {
+            try { await PublishOnceAsync(stoppingToken); }
+            catch (OperationCanceledException) { return; }
+            catch (Exception ex)
+            {
+                // Never take down the Server on a publisher failure. Log and continue —
+                // stale-row detection on the Admin side will surface the outage.
+                logger.LogWarning(ex, "Host-status publisher tick failed — will retry next heartbeat");
+            }
+
+            try { await Task.Delay(HeartbeatInterval, stoppingToken); }
+            catch (OperationCanceledException) { return; }
+        }
+    }
+
+    internal async Task PublishOnceAsync(CancellationToken ct)
+    {
+        var driverIds = driverHost.RegisteredDriverIds;
+        if (driverIds.Count == 0) return;
+
+        var now = DateTime.UtcNow;
+        using var scope = scopeFactory.CreateScope();
+        var db = scope.ServiceProvider.GetRequiredService<OtOpcUaConfigDbContext>();
+
+        foreach (var driverId in driverIds)
+        {
+            var driver = driverHost.GetDriver(driverId);
+            if (driver is not IHostConnectivityProbe probe) continue;
+
+            IReadOnlyList<HostConnectivityStatus> statuses;
+            try { statuses = probe.GetHostStatuses(); }
+            catch (Exception ex)
+            {
+                logger.LogWarning(ex, "Driver {DriverId} GetHostStatuses threw — skipping this tick", driverId);
+                continue;
+            }
+
+            foreach (var status in statuses)
+            {
+                await UpsertAsync(db, driverId, status, now, ct);
+            }
+        }
+
+        await db.SaveChangesAsync(ct);
+    }
+
+    private async Task UpsertAsync(OtOpcUaConfigDbContext db, string driverId,
+        HostConnectivityStatus status, DateTime now, CancellationToken ct)
+    {
+        var mapped = MapState(status.State);
+        var existing = await db.DriverHostStatuses.SingleOrDefaultAsync(r =>
+            r.NodeId == nodeOptions.NodeId
+            && r.DriverInstanceId == driverId
+            && r.HostName == status.HostName, ct);
+
+        if (existing is null)
+        {
+            db.DriverHostStatuses.Add(new DriverHostStatus
+            {
+                NodeId = nodeOptions.NodeId,
+                DriverInstanceId = driverId,
+                HostName = status.HostName,
+                State = mapped,
+                StateChangedUtc = status.LastChangedUtc,
+                LastSeenUtc = now,
+            });
+            return;
+        }
+
+        existing.LastSeenUtc = now;
+        if (existing.State != mapped)
+        {
+            existing.State = mapped;
+            existing.StateChangedUtc = status.LastChangedUtc;
+        }
+    }
+
+    internal static DriverHostState MapState(HostState state) => state switch
+    {
+        HostState.Running => DriverHostState.Running,
+        HostState.Stopped => DriverHostState.Stopped,
+        HostState.Faulted => DriverHostState.Faulted,
+        _ => DriverHostState.Unknown,
+    };
+}

src/ZB.MOM.WW.OtOpcUa.Server/OpcUa/DriverNodeManager.cs

@@ -5,6 +5,11 @@ using Opc.Ua.Server;
 using ZB.MOM.WW.OtOpcUa.Core.Abstractions;
 using ZB.MOM.WW.OtOpcUa.Server.Security;
 using DriverWriteRequest = ZB.MOM.WW.OtOpcUa.Core.Abstractions.WriteRequest;
+// Core.Abstractions defines a type-named HistoryReadResult (driver-side samples + continuation
+// point) that collides with Opc.Ua.HistoryReadResult (service-layer per-node result). We
+// assign driver-side results to an explicitly-aliased local and construct only the service
+// type in the overrides below.
+using OpcHistoryReadResult = Opc.Ua.HistoryReadResult;
 
 namespace ZB.MOM.WW.OtOpcUa.Server.OpcUa;
 
@@ -71,7 +76,13 @@ public sealed class DriverNodeManager : CustomNodeManager2, IAddressSpaceBuilder
                 NodeId = new NodeId(_driver.DriverInstanceId, NamespaceIndex),
                 BrowseName = new QualifiedName(_driver.DriverInstanceId, NamespaceIndex),
                 DisplayName = new LocalizedText(_driver.DriverInstanceId),
-                EventNotifier = EventNotifiers.None,
+                // Driver root is the conventional event notifier for HistoryReadEvents — clients
+                // request alarm history by targeting it and the node manager routes through
+                // IHistoryProvider.ReadEventsAsync. SubscribeToEvents is also set so live-event
+                // subscriptions (Alarm & Conditions) can point here in a future PR; today the
+                // alarm events are emitted by per-variable AlarmConditionState siblings but a
+                // "subscribe to all events from this driver" path would use this notifier.
+                EventNotifier = (byte)(EventNotifiers.SubscribeToEvents | EventNotifiers.HistoryRead),
             };
 
             // Link under Objects folder so clients see the driver subtree at browse root.
@@ -122,8 +133,15 @@ public sealed class DriverNodeManager : CustomNodeManager2, IAddressSpaceBuilder
                 DisplayName = new LocalizedText(displayName),
                 DataType = MapDataType(attributeInfo.DriverDataType),
                 ValueRank = attributeInfo.IsArray ? ValueRanks.OneDimension : ValueRanks.Scalar,
-                AccessLevel = AccessLevels.CurrentReadOrWrite,
-                UserAccessLevel = AccessLevels.CurrentReadOrWrite,
+                // Historized attributes get the HistoryRead access bit so the stack dispatches
+                // incoming HistoryRead service calls to this node. Without it the base class
+                // returns BadHistoryOperationUnsupported before our per-kind hook ever runs.
+                // HistoryWrite isn't granted — history rewrite is a separate capability the
+                // driver doesn't support today.
+                AccessLevel = (byte)(AccessLevels.CurrentReadOrWrite
+                    | (attributeInfo.IsHistorized ? AccessLevels.HistoryRead : 0)),
+                UserAccessLevel = (byte)(AccessLevels.CurrentReadOrWrite
+                    | (attributeInfo.IsHistorized ? AccessLevels.HistoryRead : 0)),
                 Historizing = attributeInfo.IsHistorized,
             };
             _currentFolder.AddChild(v);
@@ -384,4 +402,379 @@ public sealed class DriverNodeManager : CustomNodeManager2, IAddressSpaceBuilder
     internal int VariableCount => _variablesByFullRef.Count;
     internal bool TryGetVariable(string fullRef, out BaseDataVariableState? v)
         => _variablesByFullRef.TryGetValue(fullRef, out v!);
+
+    // ===================== HistoryRead service handlers (LMX #1, PR 38) =====================
+    //
+    // Wires the driver's IHistoryProvider capability (PR 35 added ReadAtTimeAsync / ReadEventsAsync
+    // alongside the PR 19 ReadRawAsync / ReadProcessedAsync) to the OPC UA HistoryRead service.
+    // CustomNodeManager2 has four protected per-kind hooks; the base dispatches to the right one
+    // based on the concrete HistoryReadDetails subtype. Each hook is sync-returning-void — the
+    // per-driver async calls are bridged via GetAwaiter().GetResult(), matching the pattern
+    // OnReadValue / OnWriteValue already use in this class so HistoryRead doesn't introduce a
+    // different sync-over-async convention.
+    //
+    // Per-node routing: every HistoryReadValueId in nodesToRead has a NodeHandle in
+    // nodesToProcess; the NodeHandle's NodeId.Identifier is the driver-side full reference
+    // (set during Variable() registration) so we can dispatch straight to IHistoryProvider
+    // without a second lookup. Nodes without IHistoryProvider backing (drivers that don't
+    // implement the capability) surface BadHistoryOperationUnsupported per slot and the
+    // rest of the batch continues — same failure-isolation pattern as OnWriteValue.
+    //
+    // Continuation-point handling is pass-through only in this PR: the driver returns null
+    // from its ContinuationPoint field today so the outer result's ContinuationPoint stays
+    // empty. Full Session.SaveHistoryContinuationPoint plumbing is a follow-up when a driver
+    // actually needs paging — the dispatch shape doesn't change, only the result-population.
+
+    private IHistoryProvider? History => _driver as IHistoryProvider;
+
+    protected override void HistoryReadRawModified(
+        ServerSystemContext context, ReadRawModifiedDetails details, TimestampsToReturn timestamps,
+        IList<HistoryReadValueId> nodesToRead, IList<OpcHistoryReadResult> results,
+        IList<ServiceResult> errors, List<NodeHandle> nodesToProcess,
+        IDictionary<NodeId, NodeState> cache)
+    {
+        if (History is null)
+        {
+            MarkAllUnsupported(nodesToProcess, results, errors);
+            return;
+        }
+
+        // IsReadModified=true requests a "modifications" history (who changed the data, when
+        // it was re-written). The driver side has no modifications store — surface that
+        // explicitly rather than silently returning raw data, which would mislead the client.
+        if (details.IsReadModified)
+        {
+            MarkAllUnsupported(nodesToProcess, results, errors, StatusCodes.BadHistoryOperationUnsupported);
+            return;
+        }
+
+        for (var n = 0; n < nodesToProcess.Count; n++)
+        {
+            var handle = nodesToProcess[n];
+            // NodeHandle.Index points back to the slot in the outer results/errors/nodesToRead
+            // arrays. nodesToProcess is the filtered subset (just the nodes this manager
+            // claimed), so writing to results[n] lands in the wrong slot when N > 1 and nodes
+            // are interleaved across multiple node managers.
+            var i = handle.Index;
+            var fullRef = ResolveFullRef(handle);
+            if (fullRef is null)
+            {
+                WriteNodeIdUnknown(results, errors, i);
+                continue;
+            }
+
+            try
+            {
+                var driverResult = History.ReadRawAsync(
+                    fullRef,
+                    details.StartTime,
+                    details.EndTime,
+                    details.NumValuesPerNode,
+                    CancellationToken.None).GetAwaiter().GetResult();
+
+                WriteResult(results, errors, i, StatusCodes.Good,
+                    BuildHistoryData(driverResult.Samples), driverResult.ContinuationPoint);
+            }
+            catch (NotSupportedException)
+            {
+                WriteUnsupported(results, errors, i);
+            }
+            catch (Exception ex)
+            {
+                _logger.LogWarning(ex, "HistoryReadRaw failed for {FullRef}", fullRef);
+                WriteInternalError(results, errors, i);
+            }
+        }
+    }
+
+    protected override void HistoryReadProcessed(
+        ServerSystemContext context, ReadProcessedDetails details, TimestampsToReturn timestamps,
+        IList<HistoryReadValueId> nodesToRead, IList<OpcHistoryReadResult> results,
+        IList<ServiceResult> errors, List<NodeHandle> nodesToProcess,
+        IDictionary<NodeId, NodeState> cache)
+    {
+        if (History is null)
+        {
+            MarkAllUnsupported(nodesToProcess, results, errors);
+            return;
+        }
+
+        // AggregateType is one NodeId shared across every item in the batch — map once.
+        var aggregate = MapAggregate(details.AggregateType?.FirstOrDefault());
+        if (aggregate is null)
+        {
+            MarkAllUnsupported(nodesToProcess, results, errors, StatusCodes.BadAggregateNotSupported);
+            return;
+        }
+
+        var interval = TimeSpan.FromMilliseconds(details.ProcessingInterval);
+        for (var n = 0; n < nodesToProcess.Count; n++)
+        {
+            var handle = nodesToProcess[n];
+            // NodeHandle.Index points back to the slot in the outer results/errors/nodesToRead
+            // arrays. nodesToProcess is the filtered subset (just the nodes this manager
+            // claimed), so writing to results[n] lands in the wrong slot when N > 1 and nodes
+            // are interleaved across multiple node managers.
+            var i = handle.Index;
+            var fullRef = ResolveFullRef(handle);
+            if (fullRef is null)
+            {
+                WriteNodeIdUnknown(results, errors, i);
+                continue;
+            }
+
+            try
+            {
+                var driverResult = History.ReadProcessedAsync(
+                    fullRef,
+                    details.StartTime,
+                    details.EndTime,
+                    interval,
+                    aggregate.Value,
+                    CancellationToken.None).GetAwaiter().GetResult();
+
+                WriteResult(results, errors, i, StatusCodes.Good,
+                    BuildHistoryData(driverResult.Samples), driverResult.ContinuationPoint);
+            }
+            catch (NotSupportedException)
+            {
+                WriteUnsupported(results, errors, i);
+            }
+            catch (Exception ex)
+            {
+                _logger.LogWarning(ex, "HistoryReadProcessed failed for {FullRef}", fullRef);
+                WriteInternalError(results, errors, i);
+            }
+        }
+    }
+
+    protected override void HistoryReadAtTime(
+        ServerSystemContext context, ReadAtTimeDetails details, TimestampsToReturn timestamps,
+        IList<HistoryReadValueId> nodesToRead, IList<OpcHistoryReadResult> results,
+        IList<ServiceResult> errors, List<NodeHandle> nodesToProcess,
+        IDictionary<NodeId, NodeState> cache)
+    {
+        if (History is null)
+        {
+            MarkAllUnsupported(nodesToProcess, results, errors);
+            return;
+        }
+
+        var requestedTimes = (IReadOnlyList<DateTime>)(details.ReqTimes?.ToArray() ?? Array.Empty<DateTime>());
+        for (var n = 0; n < nodesToProcess.Count; n++)
+        {
+            var handle = nodesToProcess[n];
+            // NodeHandle.Index points back to the slot in the outer results/errors/nodesToRead
+            // arrays. nodesToProcess is the filtered subset (just the nodes this manager
+            // claimed), so writing to results[n] lands in the wrong slot when N > 1 and nodes
+            // are interleaved across multiple node managers.
+            var i = handle.Index;
+            var fullRef = ResolveFullRef(handle);
+            if (fullRef is null)
+            {
+                WriteNodeIdUnknown(results, errors, i);
+                continue;
+            }
+
+            try
+            {
+                var driverResult = History.ReadAtTimeAsync(
+                    fullRef, requestedTimes, CancellationToken.None).GetAwaiter().GetResult();
+
+                WriteResult(results, errors, i, StatusCodes.Good,
+                    BuildHistoryData(driverResult.Samples), driverResult.ContinuationPoint);
+            }
+            catch (NotSupportedException)
+            {
+                WriteUnsupported(results, errors, i);
+            }
+            catch (Exception ex)
+            {
+                _logger.LogWarning(ex, "HistoryReadAtTime failed for {FullRef}", fullRef);
+                WriteInternalError(results, errors, i);
+            }
+        }
+    }
+
+    protected override void HistoryReadEvents(
+        ServerSystemContext context, ReadEventDetails details, TimestampsToReturn timestamps,
+        IList<HistoryReadValueId> nodesToRead, IList<OpcHistoryReadResult> results,
+        IList<ServiceResult> errors, List<NodeHandle> nodesToProcess,
+        IDictionary<NodeId, NodeState> cache)
+    {
+        if (History is null)
+        {
+            MarkAllUnsupported(nodesToProcess, results, errors);
+            return;
+        }
+
+        // SourceName filter extraction is deferred — EventFilter SelectClauses + WhereClause
+        // handling is a dedicated concern (proper per-select-clause Variant population + where
+        // filter evaluation). This PR treats the event query as "all events in range for the
+        // node's source" and populates only the standard BaseEventType fields. Richer filter
+        // handling is a follow-up; clients issuing empty/default filters get the right answer
+        // today which covers the common alarm-history browse case.
+        var maxEvents = (int)details.NumValuesPerNode;
+        if (maxEvents <= 0) maxEvents = 1000;
+
+        for (var n = 0; n < nodesToProcess.Count; n++)
+        {
+            var handle = nodesToProcess[n];
+            // NodeHandle.Index points back to the slot in the outer results/errors/nodesToRead
+            // arrays. nodesToProcess is the filtered subset (just the nodes this manager
+            // claimed), so writing to results[n] lands in the wrong slot when N > 1 and nodes
+            // are interleaved across multiple node managers.
+            var i = handle.Index;
+            // Event history queries may target a notifier object (e.g. the driver-root folder)
+            // rather than a specific variable — in that case we pass sourceName=null to mean
+            // "all sources in the driver's namespace" per the IHistoryProvider contract.
+            var fullRef = ResolveFullRef(handle);
+
+            try
+            {
+                var driverResult = History.ReadEventsAsync(
+                    sourceName: fullRef,
+                    startUtc: details.StartTime,
+                    endUtc: details.EndTime,
+                    maxEvents: maxEvents,
+                    cancellationToken: CancellationToken.None).GetAwaiter().GetResult();
+
+                WriteResult(results, errors, i, StatusCodes.Good,
+                    BuildHistoryEvent(driverResult.Events), driverResult.ContinuationPoint);
+            }
+            catch (NotSupportedException)
+            {
+                WriteUnsupported(results, errors, i);
+            }
+            catch (Exception ex)
+            {
+                _logger.LogWarning(ex, "HistoryReadEvents failed for {FullRef}", fullRef);
+                WriteInternalError(results, errors, i);
+            }
+        }
+    }
+
+    private string? ResolveFullRef(NodeHandle handle) => handle.NodeId?.Identifier as string;
+
+    // Both the results list AND the parallel errors list must be populated — MasterNodeManager
+    // merges them and the merged StatusCode is what the client sees. Leaving errors[i] at its
+    // default (BadHistoryOperationUnsupported) overrides a Good result with Unsupported, which
+    // masks a correctly-constructed HistoryData response. This was the subtle failure mode
+    // that cost most of PR 38's debugging budget.
+    private static void WriteResult(IList<OpcHistoryReadResult> results, IList<ServiceResult> errors,
+        int i, uint statusCode, ExtensionObject historyData, byte[]? continuationPoint)
+    {
+        results[i] = new OpcHistoryReadResult
+        {
+            StatusCode = statusCode,
+            HistoryData = historyData,
+            ContinuationPoint = continuationPoint,
+        };
+        errors[i] = statusCode == StatusCodes.Good
+            ? ServiceResult.Good
+            : new ServiceResult(statusCode);
+    }
+
+    private static void WriteUnsupported(IList<OpcHistoryReadResult> results, IList<ServiceResult> errors, int i)
+    {
+        results[i] = new OpcHistoryReadResult { StatusCode = StatusCodes.BadHistoryOperationUnsupported };
+        errors[i] = StatusCodes.BadHistoryOperationUnsupported;
+    }
+
+    private static void WriteInternalError(IList<OpcHistoryReadResult> results, IList<ServiceResult> errors, int i)
+    {
+        results[i] = new OpcHistoryReadResult { StatusCode = StatusCodes.BadInternalError };
+        errors[i] = StatusCodes.BadInternalError;
+    }
+
+    private static void WriteNodeIdUnknown(IList<OpcHistoryReadResult> results, IList<ServiceResult> errors, int i)
+    {
+        WriteNodeIdUnknown(results, errors, i);
+        errors[i] = StatusCodes.BadNodeIdUnknown;
+    }
+
+    private static void MarkAllUnsupported(
+        List<NodeHandle> nodes, IList<OpcHistoryReadResult> results, IList<ServiceResult> errors,
+        uint statusCode = StatusCodes.BadHistoryOperationUnsupported)
+    {
+        foreach (var handle in nodes)
+        {
+            results[handle.Index] = new OpcHistoryReadResult { StatusCode = statusCode };
+            errors[handle.Index] = statusCode == StatusCodes.Good ? ServiceResult.Good : new ServiceResult(statusCode);
+        }
+    }
+
+    /// <summary>
+    ///     Map the OPC UA Part 13 aggregate-function NodeId to the driver's
+    ///     <see cref="HistoryAggregateType"/>. Internal so the test suite can pin the mapping
+    ///     without exposing public API. Returns null for unsupported aggregates so the service
+    ///     handler can surface <c>BadAggregateNotSupported</c> on the whole batch.
+    /// </summary>
+    internal static HistoryAggregateType? MapAggregate(NodeId? aggregateNodeId)
+    {
+        if (aggregateNodeId is null) return null;
+
+        // Every AggregateFunction_* identifier is a numeric uint on the Server (0) namespace.
+        // Comparing NodeIds by value handles all the cross-encoding cases (expanded vs plain).
+        if (aggregateNodeId == ObjectIds.AggregateFunction_Average) return HistoryAggregateType.Average;
+        if (aggregateNodeId == ObjectIds.AggregateFunction_Minimum) return HistoryAggregateType.Minimum;
+        if (aggregateNodeId == ObjectIds.AggregateFunction_Maximum) return HistoryAggregateType.Maximum;
+        if (aggregateNodeId == ObjectIds.AggregateFunction_Total) return HistoryAggregateType.Total;
+        if (aggregateNodeId == ObjectIds.AggregateFunction_Count) return HistoryAggregateType.Count;
+        return null;
+    }
+
+    /// <summary>
+    ///     Wrap driver samples as <c>HistoryData</c> in an <c>ExtensionObject</c> — the on-wire
+    ///     shape the OPC UA HistoryRead service expects for raw / processed / at-time reads.
+    /// </summary>
+    internal static ExtensionObject BuildHistoryData(IReadOnlyList<DataValueSnapshot> samples)
+    {
+        var values = new DataValueCollection(samples.Count);
+        foreach (var s in samples) values.Add(ToDataValue(s));
+        return new ExtensionObject(new HistoryData { DataValues = values });
+    }
+
+    /// <summary>
+    ///     Wrap driver events as <c>HistoryEvent</c> in an <c>ExtensionObject</c>. Populates
+    ///     the minimum BaseEventType field set (SourceName, Message, Severity, Time,
+    ///     ReceiveTime, EventId) so clients that request the default
+    ///     <c>SimpleAttributeOperand</c> select-clauses see useful data. Custom EventFilter
+    ///     SelectClause evaluation is deferred — when a client sends a specific operand list,
+    ///     they currently get the standard fields back and ignore the extras. Documented on the
+    ///     public follow-up list.
+    /// </summary>
+    internal static ExtensionObject BuildHistoryEvent(IReadOnlyList<HistoricalEvent> events)
+    {
+        var fieldLists = new HistoryEventFieldListCollection(events.Count);
+        foreach (var e in events)
+        {
+            var fields = new VariantCollection
+            {
+                // Order must match BaseEventType's conventional field ordering so clients that
+                // didn't customize the SelectClauses still see recognizable columns. A future
+                // PR that respects the client's SelectClause list will drive this from the filter.
+                new Variant(e.EventId),
+                new Variant(e.SourceName ?? string.Empty),
+                new Variant(new LocalizedText(e.Message ?? string.Empty)),
+                new Variant(e.Severity),
+                new Variant(e.EventTimeUtc),
+                new Variant(e.ReceivedTimeUtc),
+            };
+            fieldLists.Add(new HistoryEventFieldList { EventFields = fields });
+        }
+        return new ExtensionObject(new HistoryEvent { Events = fieldLists });
+    }
+
+    internal static DataValue ToDataValue(DataValueSnapshot s)
+    {
+        var dv = new DataValue
+        {
+            Value = s.Value,
+            StatusCode = new StatusCode(s.StatusCode),
+            ServerTimestamp = s.ServerTimestampUtc,
+        };
+        if (s.SourceTimestampUtc.HasValue) dv.SourceTimestamp = s.SourceTimestampUtc.Value;
+        return dv;
+    }
 }

src/ZB.MOM.WW.OtOpcUa.Server/Program.cs

@@ -1,8 +1,10 @@
+using Microsoft.EntityFrameworkCore;
 using Microsoft.Extensions.Configuration;
 using Microsoft.Extensions.DependencyInjection;
 using Microsoft.Extensions.Hosting;
 using Microsoft.Extensions.Logging;
 using Serilog;
+using ZB.MOM.WW.OtOpcUa.Configuration;
 using ZB.MOM.WW.OtOpcUa.Configuration.LocalCache;
 using ZB.MOM.WW.OtOpcUa.Core.Hosting;
 using ZB.MOM.WW.OtOpcUa.Server;
@@ -72,5 +74,11 @@ builder.Services.AddSingleton<NodeBootstrap>();
 builder.Services.AddSingleton<OpcUaApplicationHost>();
 builder.Services.AddHostedService<OpcUaServerService>();
 
+// Central-config DB access for the host-status publisher (LMX follow-up #7). Scoped context
+// so per-heartbeat change-tracking stays isolated; publisher opens one scope per tick.
+builder.Services.AddDbContext<OtOpcUaConfigDbContext>(opt =>
+    opt.UseSqlServer(options.ConfigDbConnectionString));
+builder.Services.AddHostedService<HostStatusPublisher>();
+
 var host = builder.Build();
 await host.RunAsync();

src/ZB.MOM.WW.OtOpcUa.Server/Security/LdapOptions.cs

@@ -2,11 +2,37 @@ namespace ZB.MOM.WW.OtOpcUa.Server.Security;
 
 /// <summary>
 ///     LDAP settings for the OPC UA server's UserName token validator. Bound from
-///     <c>appsettings.json</c> <c>OpcUaServer:Ldap</c>. Defaults match the GLAuth dev instance
-///     (localhost:3893, dc=lmxopcua,dc=local). Production deployments set <see cref="UseTls"/>
-///     true, populate <see cref="ServiceAccountDn"/> for search-then-bind, and maintain
-///     <see cref="GroupToRole"/> with the real LDAP group names.
+///     <c>appsettings.json</c> <c>OpcUaServer:Ldap</c>. Defaults target the GLAuth dev instance
+///     (localhost:3893, <c>dc=lmxopcua,dc=local</c>) for the stock inner-loop setup. Production
+///     deployments are expected to point at Active Directory; see <see cref="UserNameAttribute"/>
+///     and the per-field xml-docs for the AD-specific overrides.
 /// </summary>
+/// <remarks>
+///     <para><b>Active Directory cheat-sheet</b>:</para>
+///     <list type="bullet">
+///         <item><see cref="Server"/>: one of the domain controllers, or the domain FQDN (will round-robin DCs).</item>
+///         <item><see cref="Port"/>: <c>389</c> (LDAP) or <c>636</c> (LDAPS); use 636 + <see cref="UseTls"/> in production.</item>
+///         <item><see cref="UseTls"/>: <c>true</c>. AD increasingly rejects plain-LDAP bind under LDAP-signing enforcement.</item>
+///         <item><see cref="AllowInsecureLdap"/>: <c>false</c>. Dev escape hatch only.</item>
+///         <item><see cref="SearchBase"/>: <c>DC=corp,DC=example,DC=com</c> — your domain's base DN.</item>
+///         <item><see cref="ServiceAccountDn"/>: a dedicated service principal with read access to user + group entries
+///         (e.g. <c>CN=OpcUaSvc,OU=Service Accounts,DC=corp,DC=example,DC=com</c>). Never a privileged admin.</item>
+///         <item><see cref="UserNameAttribute"/>: <c>sAMAccountName</c> (classic login name) or <c>userPrincipalName</c>
+///         (user@domain form). Default is <c>uid</c> which AD does <b>not</b> populate, so this override is required.</item>
+///         <item><see cref="DisplayNameAttribute"/>: <c>displayName</c> gives the human name; <c>cn</c> works too but is less rich.</item>
+///         <item><see cref="GroupAttribute"/>: <c>memberOf</c> — matches AD's default. Values are full DNs
+///         (<c>CN=&lt;Group&gt;,OU=...,DC=...</c>); the authenticator strips the leading <c>CN=</c> RDN value and uses
+///         that as the lookup key in <see cref="GroupToRole"/>.</item>
+///         <item><see cref="GroupToRole"/>: maps your AD group common-names to OPC UA roles — e.g.
+///         <c>{"OPCUA-Operators" : "WriteOperate", "OPCUA-Engineers" : "WriteConfigure"}</c>.</item>
+///     </list>
+///     <para>
+///         Nested groups are <b>not</b> expanded — AD's <c>tokenGroups</c> / <c>LDAP_MATCHING_RULE_IN_CHAIN</c>
+///         membership-chain filter isn't used. Assign users directly to the role-mapped groups, or pre-flatten
+///         membership in your directory. If nested expansion becomes a requirement, it's an authenticator
+///         enhancement (not a config change).
+///     </para>
+/// </remarks>
 public sealed class LdapOptions
 {
     public bool Enabled { get; init; } = false;
@@ -23,6 +49,20 @@ public sealed class LdapOptions
     public string DisplayNameAttribute { get; init; } = "cn";
     public string GroupAttribute { get; init; } = "memberOf";
 
+    /// <summary>
+    ///     LDAP attribute used to match a login name against user entries in the directory.
+    ///     Defaults to <c>uid</c> (RFC 2307). Common overrides:
+    ///     <list type="bullet">
+    ///         <item><c>sAMAccountName</c> — Active Directory, classic NT-style login names (e.g. <c>jdoe</c>).</item>
+    ///         <item><c>userPrincipalName</c> — Active Directory, email-style (e.g. <c>jdoe@corp.example.com</c>).</item>
+    ///         <item><c>cn</c> — GLAuth + some OpenLDAP deployments where users are keyed by common-name.</item>
+    ///     </list>
+    ///     Used only when <see cref="ServiceAccountDn"/> is non-empty (search-then-bind path) —
+    ///     direct-bind fallback constructs the DN as <c>cn=&lt;name&gt;,&lt;SearchBase&gt;</c>
+    ///     regardless of this setting and is not a production-grade path against AD.
+    /// </summary>
+    public string UserNameAttribute { get; init; } = "uid";
+
     /// <summary>
     ///     LDAP group → OPC UA role. Each authenticated user gets every role whose source group
     ///     is in their membership list. Recognized role names (CLAUDE.md): <c>ReadOnly</c> (browse

src/ZB.MOM.WW.OtOpcUa.Server/Security/LdapUserAuthenticator.cs

@@ -106,7 +106,7 @@ public sealed class LdapUserAuthenticator(LdapOptions options, ILogger<LdapUserA
         {
             await Task.Run(() => conn.Bind(options.ServiceAccountDn, options.ServiceAccountPassword), ct);
 
-            var filter = $"(uid={EscapeLdapFilter(username)})";
+            var filter = $"({options.UserNameAttribute}={EscapeLdapFilter(username)})";
             var results = await Task.Run(() =>
                 conn.Search(options.SearchBase, LdapConnection.ScopeSub, filter, ["dn"], false), ct);
 

src/ZB.MOM.WW.OtOpcUa.Server/ZB.MOM.WW.OtOpcUa.Server.csproj

@@ -24,6 +24,7 @@
         <PackageReference Include="OPCFoundation.NetStandard.Opc.Ua.Server" Version="1.5.374.126"/>
         <PackageReference Include="OPCFoundation.NetStandard.Opc.Ua.Configuration" Version="1.5.374.126"/>
         <PackageReference Include="Novell.Directory.Ldap.NETStandard" Version="3.6.0"/>
+        <PackageReference Include="Microsoft.EntityFrameworkCore.SqlServer" Version="10.0.0"/>
     </ItemGroup>
 
     <ItemGroup>

tests/ZB.MOM.WW.OtOpcUa.Configuration.Tests/DriverHostStatusTests.cs

@@ -0,0 +1,128 @@
+using Microsoft.EntityFrameworkCore;
+using Shouldly;
+using Xunit;
+using ZB.MOM.WW.OtOpcUa.Configuration.Entities;
+using ZB.MOM.WW.OtOpcUa.Configuration.Enums;
+
+namespace ZB.MOM.WW.OtOpcUa.Configuration.Tests;
+
+/// <summary>
+///     End-to-end round-trip through the DB for the <see cref="DriverHostStatus"/> entity
+///     added in PR 33 — exercises the composite primary key (NodeId, DriverInstanceId,
+///     HostName), string-backed <c>DriverHostState</c> conversion, and the two indexes the
+///     Admin UI's drill-down queries will scan (NodeId, LastSeenUtc).
+/// </summary>
+[Trait("Category", "SchemaCompliance")]
+[Collection(nameof(SchemaComplianceCollection))]
+public sealed class DriverHostStatusTests(SchemaComplianceFixture fixture)
+{
+    [Fact]
+    public async Task Composite_key_allows_same_host_across_different_nodes_or_drivers()
+    {
+        await using var ctx = NewContext();
+
+        // Same HostName + DriverInstanceId across two different server nodes — classic 2-node
+        // redundancy case. Both rows must be insertable because each server node owns its own
+        // runtime view of the shared host.
+        var now = DateTime.UtcNow;
+        ctx.DriverHostStatuses.Add(new DriverHostStatus
+        {
+            NodeId = "node-a", DriverInstanceId = "galaxy-1", HostName = "GRPlatform",
+            State = DriverHostState.Running,
+            StateChangedUtc = now, LastSeenUtc = now,
+        });
+        ctx.DriverHostStatuses.Add(new DriverHostStatus
+        {
+            NodeId = "node-b", DriverInstanceId = "galaxy-1", HostName = "GRPlatform",
+            State = DriverHostState.Stopped,
+            StateChangedUtc = now, LastSeenUtc = now,
+            Detail = "secondary hasn't taken over yet",
+        });
+        // Same server node + host, different driver instance — second driver doesn't clobber.
+        ctx.DriverHostStatuses.Add(new DriverHostStatus
+        {
+            NodeId = "node-a", DriverInstanceId = "modbus-plc1", HostName = "GRPlatform",
+            State = DriverHostState.Running,
+            StateChangedUtc = now, LastSeenUtc = now,
+        });
+        await ctx.SaveChangesAsync();
+
+        var rows = await ctx.DriverHostStatuses.AsNoTracking()
+            .Where(r => r.HostName == "GRPlatform").ToListAsync();
+
+        rows.Count.ShouldBe(3);
+        rows.ShouldContain(r => r.NodeId == "node-a" && r.DriverInstanceId == "galaxy-1");
+        rows.ShouldContain(r => r.NodeId == "node-b" && r.State == DriverHostState.Stopped && r.Detail == "secondary hasn't taken over yet");
+        rows.ShouldContain(r => r.NodeId == "node-a" && r.DriverInstanceId == "modbus-plc1");
+    }
+
+    [Fact]
+    public async Task Upsert_pattern_for_same_key_updates_in_place()
+    {
+        // The publisher hosted service (follow-up PR) upserts on every transition +
+        // heartbeat. This test pins the two-step pattern it will use: check-then-add-or-update
+        // keyed on the composite PK. If the composite key ever changes, this test breaks
+        // loudly so the publisher gets a synchronized update.
+        await using var ctx = NewContext();
+        var t0 = DateTime.UtcNow;
+        ctx.DriverHostStatuses.Add(new DriverHostStatus
+        {
+            NodeId = "upsert-node", DriverInstanceId = "upsert-driver", HostName = "upsert-host",
+            State = DriverHostState.Running,
+            StateChangedUtc = t0, LastSeenUtc = t0,
+        });
+        await ctx.SaveChangesAsync();
+
+        var t1 = t0.AddSeconds(30);
+        await using (var ctx2 = NewContext())
+        {
+            var existing = await ctx2.DriverHostStatuses.SingleAsync(r =>
+                r.NodeId == "upsert-node" && r.DriverInstanceId == "upsert-driver" && r.HostName == "upsert-host");
+            existing.State = DriverHostState.Faulted;
+            existing.StateChangedUtc = t1;
+            existing.LastSeenUtc = t1;
+            existing.Detail = "transport reset by peer";
+            await ctx2.SaveChangesAsync();
+        }
+
+        await using var ctx3 = NewContext();
+        var final = await ctx3.DriverHostStatuses.AsNoTracking().SingleAsync(r =>
+            r.NodeId == "upsert-node" && r.HostName == "upsert-host");
+        final.State.ShouldBe(DriverHostState.Faulted);
+        final.Detail.ShouldBe("transport reset by peer");
+        // Only one row — a naive "always insert" would have created a duplicate PK and thrown.
+        (await ctx3.DriverHostStatuses.CountAsync(r => r.NodeId == "upsert-node")).ShouldBe(1);
+    }
+
+    [Fact]
+    public async Task Enum_persists_as_string_not_int()
+    {
+        // Fluent config sets HasConversion<string>() on State — the DB stores 'Running' /
+        // 'Stopped' / 'Faulted' / 'Unknown' as nvarchar(16). Verify by reading the raw
+        // string back via ADO; if someone drops the conversion the column will contain '1'
+        // / '2' / '3' and this assertion fails. Matters because DBAs inspecting the table
+        // directly should see readable state names, not enum ordinals.
+        await using var ctx = NewContext();
+        ctx.DriverHostStatuses.Add(new DriverHostStatus
+        {
+            NodeId = "enum-node", DriverInstanceId = "enum-driver", HostName = "enum-host",
+            State = DriverHostState.Faulted,
+            StateChangedUtc = DateTime.UtcNow, LastSeenUtc = DateTime.UtcNow,
+        });
+        await ctx.SaveChangesAsync();
+
+        await using var conn = fixture.OpenConnection();
+        using var cmd = conn.CreateCommand();
+        cmd.CommandText = "SELECT [State] FROM DriverHostStatus WHERE NodeId = 'enum-node'";
+        var rawValue = (string?)await cmd.ExecuteScalarAsync();
+        rawValue.ShouldBe("Faulted");
+    }
+
+    private OtOpcUaConfigDbContext NewContext()
+    {
+        var options = new DbContextOptionsBuilder<OtOpcUaConfigDbContext>()
+            .UseSqlServer(fixture.ConnectionString)
+            .Options;
+        return new OtOpcUaConfigDbContext(options);
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Configuration.Tests/SchemaComplianceTests.cs

@@ -28,6 +28,7 @@ public sealed class SchemaComplianceTests
             "Namespace", "UnsArea", "UnsLine",
             "DriverInstance", "Device", "Equipment", "Tag", "PollGroup",
             "NodeAcl", "ExternalIdReservation",
+            "DriverHostStatus",
         };
 
         var actual = QueryStrings(@"

tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Host.Tests/AvevaPrerequisitesLiveTests.cs

@@ -0,0 +1,127 @@
+using System.Linq;
+using System.Threading;
+using System.Threading.Tasks;
+using Shouldly;
+using Xunit;
+using Xunit.Abstractions;
+using ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Host.Tests
+{
+    /// <summary>
+    ///     Exercises <see cref="AvevaPrerequisites"/> against the live dev box so the helper
+    ///     itself gets integration coverage — i.e. "do the probes return Pass for things that
+    ///     really are Pass?" as validated against this machine's known-installed topology.
+    ///     Category <c>LiveGalaxy</c> so CI / clean dev boxes skip cleanly.
+    /// </summary>
+    [Trait("Category", "LiveGalaxy")]
+    public sealed class AvevaPrerequisitesLiveTests
+    {
+        private readonly ITestOutputHelper _output;
+
+        public AvevaPrerequisitesLiveTests(ITestOutputHelper output) => _output = output;
+
+        [Fact]
+        public async Task CheckAll_on_live_box_reports_Framework_install()
+        {
+            var report = await AvevaPrerequisites.CheckAllAsync();
+            _output.WriteLine(report.ToString());
+            report.Checks.ShouldContain(c =>
+                c.Name == "registry:ArchestrA.Framework" && c.Status == PrerequisiteStatus.Pass,
+                "ArchestrA Framework registry root should be found on this machine.");
+        }
+
+        [Fact]
+        public async Task CheckAll_on_live_box_reports_aaBootstrap_running()
+        {
+            var report = await AvevaPrerequisites.CheckAllAsync();
+            var bootstrap = report.Checks.FirstOrDefault(c => c.Name == "service:aaBootstrap");
+            bootstrap.ShouldNotBeNull();
+            bootstrap.Status.ShouldBe(PrerequisiteStatus.Pass,
+                $"aaBootstrap must be Running for any live-Galaxy test to work — detail: {bootstrap.Detail}");
+        }
+
+        [Fact]
+        public async Task CheckAll_on_live_box_reports_aaGR_running()
+        {
+            var report = await AvevaPrerequisites.CheckAllAsync();
+            var gr = report.Checks.FirstOrDefault(c => c.Name == "service:aaGR");
+            gr.ShouldNotBeNull();
+            gr.Status.ShouldBe(PrerequisiteStatus.Pass,
+                $"aaGR (Galaxy Repository) must be Running — detail: {gr.Detail}");
+        }
+
+        [Fact]
+        public async Task CheckAll_on_live_box_reports_MxAccess_COM_registered()
+        {
+            var report = await AvevaPrerequisites.CheckAllAsync();
+            var com = report.Checks.FirstOrDefault(c => c.Name == "com:LMXProxy");
+            com.ShouldNotBeNull();
+            com.Status.ShouldBe(PrerequisiteStatus.Pass,
+                $"LMXProxy.LMXProxyServer ProgID must resolve to an InprocServer32 DLL — detail: {com.Detail}");
+        }
+
+        [Fact]
+        public async Task CheckRepositoryOnly_on_live_box_reports_ZB_reachable()
+        {
+            var report = await AvevaPrerequisites.CheckRepositoryOnlyAsync(ct: CancellationToken.None);
+            var zb = report.Checks.FirstOrDefault(c => c.Name == "sql:ZB");
+            zb.ShouldNotBeNull();
+            zb.Status.ShouldBe(PrerequisiteStatus.Pass,
+                $"ZB database must be reachable via SQL Server Windows auth — detail: {zb.Detail}");
+        }
+
+        [Fact]
+        public async Task CheckRepositoryOnly_on_live_box_reports_non_zero_deployed_objects()
+        {
+            // This box has 49 deployed objects per the research; we just assert > 0 so adding/
+            // removing objects doesn't break the test.
+            var report = await AvevaPrerequisites.CheckRepositoryOnlyAsync();
+            var deployed = report.Checks.FirstOrDefault(c => c.Name == "sql:ZB.deployedObjects");
+            deployed.ShouldNotBeNull();
+            deployed.Status.ShouldBe(PrerequisiteStatus.Pass,
+                $"At least one deployed gobject should exist — detail: {deployed.Detail}");
+        }
+
+        [Fact]
+        public async Task Aveva_side_is_ready_on_this_machine()
+        {
+            // Narrower than "livetest ready" — our own services (OtOpcUa / OtOpcUaGalaxyHost)
+            // may not be installed on a developer's box while they're actively iterating on
+            // them, but the AVEVA side (Framework / Galaxy Repository / MXAccess COM /
+            // SQL / core services) should always be up on a machine with System Platform
+            // installed. This assertion is what gates live-Galaxy tests that go straight to
+            // the Galaxy Repository without routing through our stack.
+            var report = await AvevaPrerequisites.CheckAllAsync(
+                new AvevaPrerequisites.Options { CheckGalaxyHostPipe = false });
+            _output.WriteLine(report.ToString());
+            _output.WriteLine(report.Warnings ?? "no warnings");
+
+            // Enumerate AVEVA-side failures (if any) for an actionable assertion message.
+            var avevaFails = report.Checks
+                .Where(c => c.Status == PrerequisiteStatus.Fail &&
+                            c.Category != PrerequisiteCategory.OtOpcUaService)
+                .ToList();
+            report.IsAvevaSideReady.ShouldBeTrue(
+                avevaFails.Count == 0
+                    ? "unexpected state"
+                    : "AVEVA-side failures: " + string.Join(" ; ",
+                        avevaFails.Select(f => $"{f.Name}: {f.Detail}")));
+        }
+
+        [Fact]
+        public async Task Report_captures_OtOpcUa_services_state_even_when_not_installed()
+        {
+            // The helper reports the status of OtOpcUaGalaxyHost + OtOpcUa services even if
+            // they're not installed yet — absence is itself an actionable signal. This test
+            // doesn't assert Pass/Fail on those services (their state depends on what's
+            // installed when the test runs) — it only asserts the helper EMITTED the rows,
+            // so nobody can ship a prerequisite check that silently omits our own services.
+            var report = await AvevaPrerequisites.CheckAllAsync();
+
+            report.Checks.ShouldContain(c => c.Name == "service:OtOpcUaGalaxyHost");
+            report.Checks.ShouldContain(c => c.Name == "service:OtOpcUa");
+            report.Checks.ShouldContain(c => c.Name == "service:GLAuth");
+        }
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Host.Tests/GalaxyRepositoryLiveSmokeTests.cs

@@ -6,6 +6,7 @@ using Xunit;
 using ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Host.Backend;
 using ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Host.Backend.Galaxy;
 using ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Shared.Contracts;
+using ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport;
 
 namespace ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Host.Tests
 {
@@ -16,6 +17,11 @@ namespace ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Host.Tests
     ///     SQL the v1 Host uses, proving the lift is byte-for-byte equivalent at the
     ///     <c>DiscoverHierarchyResponse</c> shape.
     /// </summary>
+    /// <remarks>
+    ///     Since PR 36, skip logic is delegated to <see cref="AvevaPrerequisites.CheckRepositoryOnlyAsync"/>
+    ///     so operators see exactly why a test skipped ("ZB db not found" vs "SQL Server
+    ///     unreachable") instead of a silent return.
+    /// </remarks>
     [Trait("Category", "LiveGalaxy")]
     public sealed class GalaxyRepositoryLiveSmokeTests
     {
@@ -26,15 +32,20 @@ namespace ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Host.Tests
             CommandTimeoutSeconds = 10,
         };
 
+        private static async Task<string?> RepositorySkipReasonAsync()
+        {
+            using var cts = new CancellationTokenSource(TimeSpan.FromSeconds(4));
+            var report = await AvevaPrerequisites.CheckRepositoryOnlyAsync(
+                DevZbOptions().ConnectionString, cts.Token);
+            return report.SkipReason;
+        }
+
         private static async Task<bool> ZbReachableAsync()
         {
-            try
-            {
-                var repo = new GalaxyRepository(DevZbOptions());
-                using var cts = new CancellationTokenSource(TimeSpan.FromSeconds(3));
-                return await repo.TestConnectionAsync(cts.Token);
-            }
-            catch { return false; }
+            // Legacy silent-skip adapter — keeps the existing tests compiling while
+            // gradually migrating to the Skip-with-reason pattern. Returns true when the
+            // prerequisite check has no Fail entries.
+            return (await RepositorySkipReasonAsync()) is null;
         }
 
         [Fact]

tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Host.Tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Host.Tests.csproj

@@ -23,6 +23,7 @@
 
     <ItemGroup>
         <ProjectReference Include="..\..\src\ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Host\ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Host.csproj"/>
+        <ProjectReference Include="..\ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport\ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport.csproj"/>
         <Reference Include="System.ServiceProcess"/>
         <!-- IMxProxy's delegate signatures mention ArchestrA.MxAccess.MXSTATUS_PROXY, so tests
              implementing the interface must resolve that type at compile time. -->

tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Proxy.Tests/HistoricalEventMappingTests.cs

@@ -0,0 +1,81 @@
+using Shouldly;
+using Xunit;
+using ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Proxy;
+using ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Shared.Contracts;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Proxy.Tests;
+
+/// <summary>
+///     Pins <see cref="GalaxyProxyDriver.ToHistoricalEvent"/> — the wire-to-domain mapping
+///     from <see cref="GalaxyHistoricalEvent"/> (MessagePack-annotated IPC contract,
+///     Unix-ms timestamps) to <c>Core.Abstractions.HistoricalEvent</c> (domain record,
+///     <see cref="DateTime"/> timestamps). Added in PR 35 alongside the new
+///     <c>IHistoryProvider.ReadEventsAsync</c> method.
+/// </summary>
+[Trait("Category", "Unit")]
+public sealed class HistoricalEventMappingTests
+{
+    [Fact]
+    public void Maps_every_field_from_wire_to_domain_record()
+    {
+        var wire = new GalaxyHistoricalEvent
+        {
+            EventId = "evt-42",
+            SourceName = "Tank1.HiAlarm",
+            EventTimeUtcUnixMs = 1_700_000_000_000L, // 2023-11-14T22:13:20.000Z
+            ReceivedTimeUtcUnixMs = 1_700_000_000_500L,
+            DisplayText = "High level reached",
+            Severity = 750,
+        };
+
+        var domain = GalaxyProxyDriver.ToHistoricalEvent(wire);
+
+        domain.EventId.ShouldBe("evt-42");
+        domain.SourceName.ShouldBe("Tank1.HiAlarm");
+        domain.EventTimeUtc.ShouldBe(new DateTime(2023, 11, 14, 22, 13, 20, DateTimeKind.Utc));
+        domain.ReceivedTimeUtc.ShouldBe(new DateTime(2023, 11, 14, 22, 13, 20, 500, DateTimeKind.Utc));
+        domain.Message.ShouldBe("High level reached");
+        domain.Severity.ShouldBe((ushort)750);
+    }
+
+    [Fact]
+    public void Preserves_null_SourceName_and_DisplayText()
+    {
+        // Historical rows from the Galaxy event historian often omit source or message for
+        // system events (e.g. time sync). The mapping must preserve null — callers use it to
+        // distinguish system events from alarm events.
+        var wire = new GalaxyHistoricalEvent
+        {
+            EventId = "sys-1",
+            SourceName = null,
+            EventTimeUtcUnixMs = 0,
+            ReceivedTimeUtcUnixMs = 0,
+            DisplayText = null,
+            Severity = 1,
+        };
+
+        var domain = GalaxyProxyDriver.ToHistoricalEvent(wire);
+
+        domain.SourceName.ShouldBeNull();
+        domain.Message.ShouldBeNull();
+    }
+
+    [Fact]
+    public void EventTime_and_ReceivedTime_are_produced_as_DateTimeKind_Utc()
+    {
+        // Unix-ms timestamps come off the wire timezone-agnostic; the mapping must tag the
+        // resulting DateTime as Utc so downstream serializers (JSON, OPC UA types) don't apply
+        // an unexpected local-time offset.
+        var wire = new GalaxyHistoricalEvent
+        {
+            EventId = "e",
+            EventTimeUtcUnixMs = 1_000L,
+            ReceivedTimeUtcUnixMs = 2_000L,
+        };
+
+        var domain = GalaxyProxyDriver.ToHistoricalEvent(wire);
+
+        domain.EventTimeUtc.Kind.ShouldBe(DateTimeKind.Utc);
+        domain.ReceivedTimeUtc.Kind.ShouldBe(DateTimeKind.Utc);
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Proxy.Tests/LiveStack/LiveStackConfig.cs

@@ -0,0 +1,75 @@
+using System.Runtime.InteropServices;
+using System.Runtime.Versioning;
+using Microsoft.Win32;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Proxy.Tests.LiveStack;
+
+/// <summary>
+///     Resolves the pipe name + shared secret the live <see cref="GalaxyProxyDriver"/> needs
+///     to connect to a running <c>OtOpcUaGalaxyHost</c> Windows service. Two sources are
+///     consulted, first match wins:
+///     <list type="number">
+///         <item>Explicit env vars (<c>OTOPCUA_GALAXY_PIPE</c>, <c>OTOPCUA_GALAXY_SECRET</c>) — lets CI / benchwork override.</item>
+///         <item>The service's per-process <c>Environment</c> registry values under
+///               <c>HKLM\SYSTEM\CurrentControlSet\Services\OtOpcUaGalaxyHost</c> — what
+///               <c>Install-Services.ps1</c> writes at install time. Requires the test to run as a
+///               principal with read access to that registry key (typically Administrators).</item>
+///     </list>
+/// </summary>
+/// <remarks>
+///     Explicitly NOT baked-in-to-source: the shared secret is rotated per install (the
+///     installer generates 32 random bytes and stores the base64 string). A hard-coded secret
+///     in tests would diverge from production the moment someone re-installed the service.
+/// </remarks>
+public sealed record LiveStackConfig(string PipeName, string SharedSecret, string? Source)
+{
+    public const string EnvPipeName = "OTOPCUA_GALAXY_PIPE";
+    public const string EnvSharedSecret = "OTOPCUA_GALAXY_SECRET";
+    public const string ServiceRegistryKey =
+        @"SYSTEM\CurrentControlSet\Services\OtOpcUaGalaxyHost";
+    public const string DefaultPipeName = "OtOpcUaGalaxy";
+
+    public static LiveStackConfig? Resolve()
+    {
+        var envPipe = Environment.GetEnvironmentVariable(EnvPipeName);
+        var envSecret = Environment.GetEnvironmentVariable(EnvSharedSecret);
+        if (!string.IsNullOrWhiteSpace(envPipe) && !string.IsNullOrWhiteSpace(envSecret))
+            return new LiveStackConfig(envPipe, envSecret, "env vars");
+
+        if (!RuntimeInformation.IsOSPlatform(OSPlatform.Windows))
+            return null;
+
+        return FromServiceRegistry();
+    }
+
+    [SupportedOSPlatform("windows")]
+    private static LiveStackConfig? FromServiceRegistry()
+    {
+        try
+        {
+            using var key = Registry.LocalMachine.OpenSubKey(ServiceRegistryKey);
+            if (key is null) return null;
+            var env = key.GetValue("Environment") as string[];
+            if (env is null || env.Length == 0) return null;
+
+            string? pipe = null, secret = null;
+            foreach (var line in env)
+            {
+                var eq = line.IndexOf('=');
+                if (eq <= 0) continue;
+                var name = line[..eq];
+                var value = line[(eq + 1)..];
+                if (name.Equals(EnvPipeName, StringComparison.OrdinalIgnoreCase)) pipe = value;
+                else if (name.Equals(EnvSharedSecret, StringComparison.OrdinalIgnoreCase)) secret = value;
+            }
+
+            if (string.IsNullOrWhiteSpace(secret)) return null;
+            return new LiveStackConfig(pipe ?? DefaultPipeName, secret, "service registry");
+        }
+        catch
+        {
+            // Access denied / key missing / malformed — caller gets null and surfaces a Skip.
+            return null;
+        }
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Proxy.Tests/LiveStack/LiveStackFixture.cs

@@ -0,0 +1,164 @@
+using System.Runtime.InteropServices;
+using System.Runtime.Versioning;
+using System.Security.Principal;
+using System.Threading;
+using System.Threading.Tasks;
+using Xunit;
+using ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Proxy.Tests.LiveStack;
+
+/// <summary>
+///     Connects a single <see cref="GalaxyProxyDriver"/> to the already-running
+///     <c>OtOpcUaGalaxyHost</c> Windows service for the lifetime of a test class. Uses
+///     <see cref="AvevaPrerequisites"/> to decide whether to proceed; on failure,
+///     <see cref="SkipReason"/> is populated and each test calls <see cref="SkipIfUnavailable"/>
+///     to translate that into <c>Assert.Skip</c>.
+/// </summary>
+/// <remarks>
+///     <para>
+///         <b>Does NOT spawn the Host process.</b> Production deploys <c>OtOpcUaGalaxyHost</c>
+///         as a standalone Windows service — spawning a second instance from a test would
+///         bypass the COM-apartment + service-account setup and fail differently than
+///         production (see <c>project_galaxy_host_service.md</c> memory).
+///     </para>
+///     <para>
+///         <b>Shared-secret handling</b>: read from <see cref="LiveStackConfig"/> — env vars
+///         first, then the service's registry-stored <c>Environment</c> values. Requires
+///         the test process to have read access to
+///         <c>HKLM\SYSTEM\CurrentControlSet\Services\OtOpcUaGalaxyHost</c>; on a dev box
+///         that typically means running the test host elevated, or exporting
+///         <c>OTOPCUA_GALAXY_SECRET</c> out-of-band.
+///     </para>
+/// </remarks>
+public sealed class LiveStackFixture : IAsyncLifetime
+{
+    public GalaxyProxyDriver? Driver { get; private set; }
+
+    public string? SkipReason { get; private set; }
+
+    public PrerequisiteReport? PrerequisiteReport { get; private set; }
+
+    public LiveStackConfig? Config { get; private set; }
+
+    public async ValueTask InitializeAsync()
+    {
+        // 0. Elevated-shell short-circuit. The OtOpcUaGalaxyHost pipe ACL allows the configured
+        //    SID but explicitly DENIES Administrators (decision #76 — production hardening).
+        //    A test process running with a high-integrity token (any elevated shell) carries the
+        //    Admins group in its security context, so the deny rule trumps the user's allow and
+        //    the pipe connect returns UnauthorizedAccessException — technically correct but
+        //    the operationally confusing failure mode that ate most of the PR 37 install
+        //    debugging session. Surfacing it explicitly here saves the next operator the same
+        //    five-step diagnosis. ParityFixture has the same skip with the same rationale.
+        if (IsElevatedAdministratorOnWindows())
+        {
+            SkipReason =
+                "Test host is running with elevated (Administrators) privileges, but the " +
+                "OtOpcUaGalaxyHost named-pipe ACL explicitly denies Administrators per the IPC " +
+                "security design (decision #76 / PipeAcl.cs). Re-run from a NORMAL (non-admin) " +
+                "PowerShell window — even when your user is already in the pipe's allow list, " +
+                "the elevated token's Admins group membership trumps the allow rule.";
+            return;
+        }
+
+        // 1. AVEVA + OtOpcUa service state — actionable diagnostic if anything is missing.
+        using var cts = new CancellationTokenSource(TimeSpan.FromSeconds(10));
+        PrerequisiteReport = await AvevaPrerequisites.CheckAllAsync(
+            new AvevaPrerequisites.Options { CheckGalaxyHostPipe = true, CheckHistorian = false },
+            cts.Token);
+
+        if (!PrerequisiteReport.IsLivetestReady)
+        {
+            SkipReason = PrerequisiteReport.SkipReason;
+            return;
+        }
+
+        // 2. Secret / pipe-name resolution. If the service is running but we can't discover its
+        //    env vars from registry (non-elevated test host), a clear message beats a silent
+        //    connect-rejected failure 10 seconds later.
+        Config = LiveStackConfig.Resolve();
+        if (Config is null)
+        {
+            SkipReason =
+                $"Cannot resolve shared secret. Set {LiveStackConfig.EnvSharedSecret} (and optionally " +
+                $"{LiveStackConfig.EnvPipeName}) in the environment, or run the test host elevated so it " +
+                $"can read HKLM\\{LiveStackConfig.ServiceRegistryKey}\\Environment.";
+            return;
+        }
+
+        // 3. Connect. InitializeAsync does the pipe connect + handshake; a 5-second
+        //    ConnectTimeout gives enough headroom for a service that just started.
+        Driver = new GalaxyProxyDriver(new GalaxyProxyOptions
+        {
+            DriverInstanceId = "live-stack-smoke",
+            PipeName = Config.PipeName,
+            SharedSecret = Config.SharedSecret,
+            ConnectTimeout = TimeSpan.FromSeconds(5),
+        });
+
+        try
+        {
+            await Driver.InitializeAsync(driverConfigJson: "{}", CancellationToken.None);
+        }
+        catch (Exception ex)
+        {
+            SkipReason =
+                $"Connected to named pipe '{Config.PipeName}' but GalaxyProxyDriver.InitializeAsync failed: " +
+                $"{ex.GetType().Name}: {ex.Message}. Common causes: shared secret mismatch (rotated after last install), " +
+                $"service account SID not in pipe ACL (installer sets OTOPCUA_ALLOWED_SID to the service account — " +
+                $"test must run as that user), or Host's backend couldn't connect to ZB.";
+            Driver.Dispose();
+            Driver = null;
+            return;
+        }
+    }
+
+    public async ValueTask DisposeAsync()
+    {
+        if (Driver is not null)
+        {
+            try { await Driver.ShutdownAsync(CancellationToken.None); } catch { /* best-effort */ }
+            Driver.Dispose();
+        }
+    }
+
+    /// <summary>
+    ///     Translate <see cref="SkipReason"/> into <c>Assert.Skip</c>. Tests call this at the
+    ///     top of every fact so a fixture init failure shows up as a cleanly-skipped test with
+    ///     the full prerequisites report, not a cascading NullReferenceException on
+    ///     <see cref="Driver"/>.
+    /// </summary>
+    public void SkipIfUnavailable()
+    {
+        if (SkipReason is not null) Assert.Skip(SkipReason);
+    }
+
+    private static bool IsElevatedAdministratorOnWindows()
+    {
+        if (!RuntimeInformation.IsOSPlatform(OSPlatform.Windows)) return false;
+        return CheckWindowsAdminToken();
+    }
+
+    [SupportedOSPlatform("windows")]
+    private static bool CheckWindowsAdminToken()
+    {
+        try
+        {
+            using var identity = WindowsIdentity.GetCurrent();
+            return new WindowsPrincipal(identity).IsInRole(WindowsBuiltInRole.Administrator);
+        }
+        catch
+        {
+            // Probe shouldn't crash the test; if we can't determine elevation, optimistically
+            // continue and let the actual pipe connect surface its own error.
+            return false;
+        }
+    }
+}
+
+[CollectionDefinition(Name)]
+public sealed class LiveStackCollection : ICollectionFixture<LiveStackFixture>
+{
+    public const string Name = "LiveStack";
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Proxy.Tests/LiveStack/LiveStackSmokeTests.cs

@@ -0,0 +1,282 @@
+using System.Collections.Generic;
+using System.Linq;
+using System.Threading;
+using System.Threading.Tasks;
+using Shouldly;
+using Xunit;
+using ZB.MOM.WW.OtOpcUa.Core.Abstractions;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Proxy.Tests.LiveStack;
+
+/// <summary>
+///     End-to-end smoke against the installed <c>OtOpcUaGalaxyHost</c> Windows service.
+///     Closes LMX follow-up #5 — exercises the full topology: <see cref="GalaxyProxyDriver"/>
+///     in-process → named-pipe IPC → <c>OtOpcUaGalaxyHost</c> service → <c>MxAccessGalaxyBackend</c> →
+///     live MXAccess runtime → real Galaxy objects + attributes.
+/// </summary>
+/// <remarks>
+///     <para>
+///         <b>Preconditions</b> (all checked by <see cref="LiveStackFixture"/>, surfaced via
+///         <c>Assert.Skip</c> when missing):
+///     </para>
+///     <list type="bullet">
+///         <item>AVEVA System Platform installed + Platform deployed.</item>
+///         <item><c>aaBootstrap</c> / <c>aaGR</c> / <c>NmxSvc</c> / <c>MSSQLSERVER</c> running.</item>
+///         <item>MXAccess COM server registered.</item>
+///         <item>ZB database exists with at least one deployed gobject.</item>
+///         <item><c>OtOpcUaGalaxyHost</c> service installed + running (named pipe accepting connections).</item>
+///         <item>Shared secret discoverable via <c>OTOPCUA_GALAXY_SECRET</c> env var or the
+///               service's registry Environment values (test host typically needs to be elevated
+///               to read the latter).</item>
+///         <item>Test process runs as the account listed in the service's pipe ACL
+///               (<c>OTOPCUA_ALLOWED_SID</c>, typically the service account per decision #76).</item>
+///     </list>
+///     <para>
+///         Tests here are deliberately read-only. Writes against live Galaxy attributes are a
+///         separate concern — they need a test-only UDA or an agreed scratch tag so they can't
+///         accidentally mutate a process-critical value. Adding a write test is a follow-up
+///         PR that reuses this fixture.
+///     </para>
+/// </remarks>
+[Trait("Category", "LiveGalaxy")]
+[Collection(LiveStackCollection.Name)]
+public sealed class LiveStackSmokeTests(LiveStackFixture fixture)
+{
+    [Fact]
+    public void Fixture_initialized_successfully()
+    {
+        fixture.SkipIfUnavailable();
+        // If the fixture init succeeded, Driver is non-null and InitializeAsync completed.
+        // This is the cheapest possible assertion that the IPC handshake worked end-to-end;
+        // every other test in this class depends on it.
+        fixture.Driver.ShouldNotBeNull();
+        fixture.Config.ShouldNotBeNull();
+        fixture.PrerequisiteReport.ShouldNotBeNull();
+        fixture.PrerequisiteReport!.IsLivetestReady.ShouldBeTrue(fixture.PrerequisiteReport.SkipReason);
+    }
+
+    [Fact]
+    public void Driver_reports_Healthy_after_IPC_handshake()
+    {
+        fixture.SkipIfUnavailable();
+        var health = fixture.Driver!.GetHealth();
+        health.State.ShouldBe(DriverState.Healthy,
+            $"Expected Healthy after successful IPC connect; Reason={health.LastError}");
+    }
+
+    [Fact]
+    public async Task DiscoverAsync_returns_at_least_one_variable_from_live_galaxy()
+    {
+        fixture.SkipIfUnavailable();
+        var builder = new CapturingAddressSpaceBuilder();
+        using var cts = new CancellationTokenSource(TimeSpan.FromSeconds(30));
+        await fixture.Driver!.DiscoverAsync(builder, cts.Token);
+
+        builder.Variables.Count.ShouldBeGreaterThan(0,
+            "Live Galaxy has > 0 deployed objects per the prereq check — at least one variable must be discovered. " +
+            "Zero usually means the Host couldn't read ZB (check OTOPCUA_GALAXY_ZB_CONN in the service Environment).");
+
+        // Every discovered attribute must carry a non-empty FullName so the OPC UA server can
+        // route reads/writes back. Regression guard — PR 19 normalized this across drivers.
+        builder.Variables.ShouldAllBe(v => !string.IsNullOrEmpty(v.AttributeInfo.FullName));
+    }
+
+    [Fact]
+    public void GetHostStatuses_reports_at_least_one_platform()
+    {
+        fixture.SkipIfUnavailable();
+        var statuses = fixture.Driver!.GetHostStatuses();
+        statuses.Count.ShouldBeGreaterThan(0,
+            "Live Galaxy must report at least one Platform/AppEngine host via IHostConnectivityProbe. " +
+            "Zero means the Host's probe loop hasn't completed its first tick or the Platform isn't deployed locally.");
+
+        // Host names are driver-opaque to the Core but non-empty by contract.
+        statuses.ShouldAllBe(h => !string.IsNullOrEmpty(h.HostName));
+    }
+
+    [Fact]
+    public async Task Can_read_a_discovered_variable_from_live_galaxy()
+    {
+        fixture.SkipIfUnavailable();
+        var builder = new CapturingAddressSpaceBuilder();
+        using var cts = new CancellationTokenSource(TimeSpan.FromSeconds(30));
+        await fixture.Driver!.DiscoverAsync(builder, cts.Token);
+        builder.Variables.Count.ShouldBeGreaterThan(0);
+
+        // Pick the first discovered variable. Read-only smoke — we don't assert on Value,
+        // only that a ReadAsync round-trip through Proxy → Host pipe → MXAccess → back
+        // returns a snapshot with a non-BadInternalError status. Galaxy attributes default to
+        // Uncertain quality until the Engine's first scan publishes them, which is fine here.
+        var full = builder.Variables[0].AttributeInfo.FullName;
+        var snapshots = await fixture.Driver!.ReadAsync([full], cts.Token);
+
+        snapshots.Count.ShouldBe(1);
+        var snap = snapshots[0];
+        snap.StatusCode.ShouldNotBe(0x80020000u,
+            $"Read returned BadInternalError for {full} — the Host couldn't fulfil the request. " +
+            $"Investigate: the Host service's logs at {System.Environment.GetFolderPath(System.Environment.SpecialFolder.CommonApplicationData)}\\OtOpcUa\\Galaxy\\logs.");
+    }
+
+    [Fact]
+    public async Task Write_then_read_roundtrips_a_writable_Boolean_attribute_on_TestMachine_001()
+    {
+        // PR 40 — finishes LMX #5. Targets DelmiaReceiver_001.TestAttribute, the writable
+        // Boolean attribute on the TestMachine_001 hierarchy that the dev Galaxy was deployed
+        // with for exactly this kind of integration testing. We invert the current value and
+        // assert the new value comes back, then restore the original so the test is effectively
+        // idempotent (Galaxy holds the value across runs since it's a deployed UDA).
+        fixture.SkipIfUnavailable();
+        const string fullRef = "DelmiaReceiver_001.TestAttribute";
+        using var cts = new CancellationTokenSource(TimeSpan.FromSeconds(30));
+
+        // Read current value first — gives the cleanup path the right baseline. Galaxy may
+        // return Uncertain quality until the Engine has scanned the attribute at least once;
+        // we don't read into a strongly-typed bool until Status is Good.
+        var before = (await fixture.Driver!.ReadAsync([fullRef], cts.Token))[0];
+        before.StatusCode.ShouldNotBe(0x80020000u, $"baseline read failed for {fullRef}: {before.Value}");
+        var originalBool = Convert.ToBoolean(before.Value ?? false);
+        var inverted = !originalBool;
+
+        try
+        {
+            // Write the inverted value via IWritable.
+            var writeResults = await fixture.Driver!.WriteAsync(
+                [new(fullRef, inverted)], cts.Token);
+            writeResults.Count.ShouldBe(1);
+            writeResults[0].StatusCode.ShouldBe(0u,
+                $"WriteAsync returned status 0x{writeResults[0].StatusCode:X8} for {fullRef} — " +
+                $"check the Host service log at %ProgramData%\\OtOpcUa\\Galaxy\\.");
+
+            // The Engine's scan + acknowledgement is async — read in a short loop with a 5s
+            // budget. Galaxy's attribute roundtrip on a dev box is typically sub-second but
+            // we give headroom for first-scan after a service restart.
+            DataValueSnapshot after = default!;
+            var deadline = DateTime.UtcNow.AddSeconds(5);
+            while (DateTime.UtcNow < deadline)
+            {
+                after = (await fixture.Driver!.ReadAsync([fullRef], cts.Token))[0];
+                if (after.StatusCode == 0u && Convert.ToBoolean(after.Value ?? false) == inverted) break;
+                await Task.Delay(200, cts.Token);
+            }
+            after.StatusCode.ShouldBe(0u, "post-write read failed");
+            Convert.ToBoolean(after.Value ?? false).ShouldBe(inverted,
+                $"Wrote {inverted} but Galaxy returned {after.Value} after the scan window.");
+        }
+        finally
+        {
+            // Restore — best-effort. If this throws the test still reports its primary result;
+            // we just leave a flipped TestAttribute on the dev box (benign, name says it all).
+            try { await fixture.Driver!.WriteAsync([new(fullRef, originalBool)], cts.Token); }
+            catch { /* swallow */ }
+        }
+    }
+
+    [Fact]
+    public async Task Subscribe_fires_OnDataChange_with_initial_value_then_again_after_a_write()
+    {
+        // Subscribe + write is the canonical "is the data path actually live" test for
+        // an OPC UA driver. We subscribe to the same Boolean attribute, expect an initial-
+        // value callback within a couple of seconds (per ISubscribable's contract — the
+        // driver MAY fire OnDataChange immediately with the current value), then write a
+        // distinct value and expect a second callback carrying the new value.
+        fixture.SkipIfUnavailable();
+        const string fullRef = "DelmiaReceiver_001.TestAttribute";
+        using var cts = new CancellationTokenSource(TimeSpan.FromSeconds(30));
+
+        // Capture every OnDataChange notification for this fullRef onto a thread-safe queue
+        // we can poll from the test thread. Galaxy's MXAccess advisory fires on its own
+        // thread; we don't want to block it.
+        var notifications = new System.Collections.Concurrent.ConcurrentQueue<DataValueSnapshot>();
+        void Handler(object? sender, DataChangeEventArgs e)
+        {
+            if (string.Equals(e.FullReference, fullRef, StringComparison.OrdinalIgnoreCase))
+                notifications.Enqueue(e.Snapshot);
+        }
+        fixture.Driver!.OnDataChange += Handler;
+
+        // Read current value so we know which value to write to force a transition.
+        var before = (await fixture.Driver!.ReadAsync([fullRef], cts.Token))[0];
+        var originalBool = Convert.ToBoolean(before.Value ?? false);
+        var toWrite = !originalBool;
+
+        ISubscriptionHandle? handle = null;
+        try
+        {
+            handle = await fixture.Driver!.SubscribeAsync(
+                [fullRef], TimeSpan.FromMilliseconds(250), cts.Token);
+
+            // Wait for initial-value notification — typical < 1s on a hot Galaxy, give 5s.
+            await WaitForAsync(() => notifications.Count >= 1, TimeSpan.FromSeconds(5), cts.Token);
+            notifications.Count.ShouldBeGreaterThanOrEqualTo(1,
+                $"No initial-value OnDataChange for {fullRef} within 5s. " +
+                $"Either MXAccess subscription failed silently or the Engine hasn't scanned yet.");
+
+            // Drain the initial-value queue before writing so we count post-write deltas only.
+            var initialCount = notifications.Count;
+
+            // Write the toggled value. Engine scan + advisory fires the second callback.
+            var w = await fixture.Driver!.WriteAsync([new(fullRef, toWrite)], cts.Token);
+            w[0].StatusCode.ShouldBe(0u);
+
+            await WaitForAsync(() => notifications.Count > initialCount, TimeSpan.FromSeconds(8), cts.Token);
+            notifications.Count.ShouldBeGreaterThan(initialCount,
+                $"OnDataChange did not fire after writing {toWrite} to {fullRef} within 8s.");
+
+            // Find the post-write notification carrying the toggled value (initial value may
+            // appear multiple times before the write commits — search the tail).
+            var postWrite = notifications.ToArray().Reverse()
+                .FirstOrDefault(n => n.StatusCode == 0u && Convert.ToBoolean(n.Value ?? false) == toWrite);
+            postWrite.ShouldNotBe(default,
+                $"No OnDataChange carrying the toggled value {toWrite} appeared in the queue: " +
+                string.Join(",", notifications.Select(n => $"{n.Value}@{n.StatusCode:X8}")));
+        }
+        finally
+        {
+            fixture.Driver!.OnDataChange -= Handler;
+            if (handle is not null)
+            {
+                try { await fixture.Driver!.UnsubscribeAsync(handle, cts.Token); } catch { /* swallow */ }
+            }
+            // Restore baseline.
+            try { await fixture.Driver!.WriteAsync([new(fullRef, originalBool)], cts.Token); } catch { /* swallow */ }
+        }
+    }
+
+    private static async Task WaitForAsync(Func<bool> predicate, TimeSpan budget, CancellationToken ct)
+    {
+        var deadline = DateTime.UtcNow + budget;
+        while (DateTime.UtcNow < deadline)
+        {
+            if (predicate()) return;
+            await Task.Delay(100, ct);
+        }
+    }
+
+    /// <summary>
+    ///     Minimal <see cref="IAddressSpaceBuilder"/> implementation that captures every
+    ///     Variable() call into a flat list so tests can inspect what discovery produced
+    ///     without running the full OPC UA node-manager stack.
+    /// </summary>
+    private sealed class CapturingAddressSpaceBuilder : IAddressSpaceBuilder
+    {
+        public List<(string BrowseName, DriverAttributeInfo AttributeInfo)> Variables { get; } = [];
+
+        public IAddressSpaceBuilder Folder(string browseName, string displayName) => this;
+        public IVariableHandle Variable(string browseName, string displayName, DriverAttributeInfo attributeInfo)
+        {
+            Variables.Add((browseName, attributeInfo));
+            return new NoopHandle(attributeInfo.FullName);
+        }
+        public void AddProperty(string browseName, DriverDataType dataType, object? value) { }
+
+        private sealed class NoopHandle(string fullReference) : IVariableHandle
+        {
+            public string FullReference { get; } = fullReference;
+            public IAlarmConditionSink MarkAsAlarmCondition(AlarmConditionInfo info) => new NoopSink();
+            private sealed class NoopSink : IAlarmConditionSink
+            {
+                public void OnTransition(AlarmEventArgs args) { }
+            }
+        }
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Proxy.Tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Proxy.Tests.csproj

@@ -22,6 +22,7 @@
     <ItemGroup>
         <ProjectReference Include="..\..\src\ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Proxy\ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Proxy.csproj"/>
         <ProjectReference Include="..\..\src\ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Host\ZB.MOM.WW.OtOpcUa.Driver.Galaxy.Host.csproj"/>
+        <ProjectReference Include="..\ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport\ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport.csproj"/>
     </ItemGroup>
 
     <ItemGroup>

tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport/AvevaPrerequisites.cs

@@ -0,0 +1,163 @@
+using ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport.Probes;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport;
+
+/// <summary>
+///     Entry point for live-AVEVA test fixtures. Runs every relevant probe and returns a
+///     <see cref="PrerequisiteReport"/> whose <c>SkipReason</c> feeds <c>Assert.Skip</c> when
+///     the environment isn't set up. Non-Windows hosts get a single aggregated Skip row per
+///     category instead of a flood of individual skips.
+/// </summary>
+/// <remarks>
+///     <para><b>Call shape</b>:</para>
+///     <code>
+///         var report = await AvevaPrerequisites.CheckAllAsync();
+///         if (report.SkipReason is not null) Assert.Skip(report.SkipReason);
+///     </code>
+///     <para><b>Categories in rough order of 'would I want to know first?'</b>:</para>
+///     <list type="number">
+///         <item>Environment — process bitness, OS platform, RPCSS up.</item>
+///         <item>AvevaInstall — Framework registry, install paths, no pending reboot.</item>
+///         <item>AvevaCoreService — aaBootstrap / aaGR / NmxSvc running.</item>
+///         <item>MxAccessCom — LMXProxy.LMXProxyServer ProgID → CLSID → file-on-disk.</item>
+///         <item>GalaxyRepository — SQL reachable, ZB exists, deployed-object count.</item>
+///         <item>OtOpcUaService — our two Windows services + GLAuth.</item>
+///         <item>AvevaSoftService — aaLogger etc., warn only.</item>
+///         <item>AvevaHistorian — aahClientAccessPoint etc., optional.</item>
+///     </list>
+///     <para><b>What's NOT checked here</b>: end-to-end subscribe / read / write against a real
+///     Galaxy tag. That's the job of the live-smoke tests this helper gates — the helper just
+///     tells them whether running is worthwhile.</para>
+/// </remarks>
+public static class AvevaPrerequisites
+{
+    // -------- Individual service lists (kept as data so tests can inspect / override) --------
+
+    /// <summary>Services whose absence means live-Galaxy tests can't run at all.</summary>
+    internal static readonly (string Name, string Purpose)[] CoreServices =
+    [
+        ("aaBootstrap", "master service that starts the Platform process + brokers aa* communication"),
+        ("aaGR", "Galaxy Repository host — mediates IDE / runtime access to ZB"),
+        ("NmxSvc", "Network Message Exchange — MXAccess + Bootstrap transport"),
+        ("MSSQLSERVER", "SQL Server instance that hosts the ZB database"),
+    ];
+
+    /// <summary>Warn-but-don't-fail AVEVA services.</summary>
+    internal static readonly (string Name, string Purpose)[] SoftServices =
+    [
+        ("aaLogger", "ArchestrA Logger — diagnostic log receiver; stack runs without it but error visibility suffers"),
+        ("aaUserValidator", "OS user/group auth for ArchestrA security; only required when Galaxy security mode isn't 'Open'"),
+        ("aaGlobalDataCacheMonitorSvr", "cross-platform global data cache; single-node dev boxes run fine without it"),
+    ];
+
+    /// <summary>Optional AVEVA Historian services — only required for HistoryRead IPC paths.</summary>
+    internal static readonly (string Name, string Purpose)[] HistorianServices =
+    [
+        ("aahClientAccessPoint", "AVEVA Historian Client Access Point — HistoryRead IPC endpoint"),
+        ("aahGateway", "AVEVA Historian Gateway"),
+    ];
+
+    /// <summary>OtOpcUa-stack Windows services + third-party deps we manage.</summary>
+    internal static readonly (string Name, string Purpose, bool HardRequired)[] OtOpcUaServices =
+    [
+        ("OtOpcUaGalaxyHost", "Galaxy.Host out-of-process service (net48 x86, STA + MXAccess)", true),
+        ("OtOpcUa", "Main OPC UA server service (hosts Proxy + DriverHost + Admin-facing DB publisher)", false),
+        ("GLAuth", "LDAP server (dev only) — glauth.exe on localhost:3893", false),
+    ];
+
+    // -------- Orchestrator --------
+
+    public static async Task<PrerequisiteReport> CheckAllAsync(
+        Options? options = null, CancellationToken ct = default)
+    {
+        options ??= new Options();
+        var checks = new List<PrerequisiteCheck>();
+
+        // Environment
+        checks.Add(MxAccessComProbe.CheckProcessBitness());
+
+        // AvevaInstall — registry + files
+        checks.Add(RegistryProbe.CheckFrameworkInstalled());
+        checks.Add(RegistryProbe.CheckPlatformDeployed());
+        checks.Add(RegistryProbe.CheckRebootPending());
+
+        // AvevaCoreService
+        foreach (var (name, purpose) in CoreServices)
+            checks.Add(ServiceProbe.Check(name, PrerequisiteCategory.AvevaCoreService, hardRequired: true, whatItDoes: purpose));
+
+        // MxAccessCom
+        checks.Add(MxAccessComProbe.Check());
+
+        // GalaxyRepository
+        checks.Add(await SqlProbe.CheckZbDatabaseAsync(options.SqlConnectionString, ct));
+        // Deployed-object count only makes sense if the DB check passed.
+        if (checks[checks.Count - 1].Status == PrerequisiteStatus.Pass)
+            checks.Add(await SqlProbe.CheckDeployedObjectCountAsync(options.SqlConnectionString, ct));
+
+        // OtOpcUaService
+        foreach (var (name, purpose, hard) in OtOpcUaServices)
+            checks.Add(ServiceProbe.Check(name, PrerequisiteCategory.OtOpcUaService, hardRequired: hard, whatItDoes: purpose));
+        if (options.CheckGalaxyHostPipe)
+            checks.Add(await NamedPipeProbe.CheckGalaxyHostPipeAsync(options.GalaxyHostPipeName, ct));
+
+        // AvevaSoftService
+        foreach (var (name, purpose) in SoftServices)
+            checks.Add(ServiceProbe.Check(name, PrerequisiteCategory.AvevaSoftService, hardRequired: false, whatItDoes: purpose));
+
+        // AvevaHistorian
+        if (options.CheckHistorian)
+        {
+            foreach (var (name, purpose) in HistorianServices)
+                checks.Add(ServiceProbe.Check(name, PrerequisiteCategory.AvevaHistorian, hardRequired: false, whatItDoes: purpose));
+        }
+
+        return new PrerequisiteReport(checks);
+    }
+
+    /// <summary>
+    ///     Narrower check for tests that only need the Galaxy Repository (SQL) path — don't
+    ///     pay the cost of probing every aa* service when the test only reads gobject rows.
+    /// </summary>
+    public static async Task<PrerequisiteReport> CheckRepositoryOnlyAsync(
+        string? sqlConnectionString = null, CancellationToken ct = default)
+    {
+        var checks = new List<PrerequisiteCheck>
+        {
+            await SqlProbe.CheckZbDatabaseAsync(sqlConnectionString, ct),
+        };
+        if (checks[0].Status == PrerequisiteStatus.Pass)
+            checks.Add(await SqlProbe.CheckDeployedObjectCountAsync(sqlConnectionString, ct));
+        return new PrerequisiteReport(checks);
+    }
+
+    /// <summary>
+    ///     Narrower check for the named-pipe endpoint — tests that drive the full Proxy
+    ///     against a live Galaxy.Host service don't need the SQL or AVEVA-internal probes
+    ///     (the Host does that work internally; we just need the pipe to accept).
+    /// </summary>
+    public static async Task<PrerequisiteReport> CheckGalaxyHostPipeOnlyAsync(
+        string? pipeName = null, CancellationToken ct = default)
+    {
+        var checks = new List<PrerequisiteCheck>
+        {
+            await NamedPipeProbe.CheckGalaxyHostPipeAsync(pipeName, ct),
+        };
+        return new PrerequisiteReport(checks);
+    }
+
+    /// <summary>Knobs for <see cref="CheckAllAsync"/>.</summary>
+    public sealed class Options
+    {
+        /// <summary>SQL Server connection string — defaults to Windows-auth <c>localhost\ZB</c>.</summary>
+        public string? SqlConnectionString { get; init; }
+
+        /// <summary>Named-pipe endpoint for OtOpcUaGalaxyHost — defaults to <c>OtOpcUaGalaxy</c>.</summary>
+        public string? GalaxyHostPipeName { get; init; }
+
+        /// <summary>Include the named-pipe probe. Off by default — it's a seconds-long TCP-like probe and some tests don't need it.</summary>
+        public bool CheckGalaxyHostPipe { get; init; } = true;
+
+        /// <summary>Include Historian service probes. Off by default — Historian is optional.</summary>
+        public bool CheckHistorian { get; init; } = false;
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport/Net48Polyfills.cs

@@ -0,0 +1,26 @@
+#if NET48
+// Polyfills for C# 9+ language features that the helper uses but that net48 BCL doesn't
+// provide. Keeps the sources single-target-free at the language level — the same .cs files
+// build on both frameworks without preprocessor guards in the callsites.
+
+namespace System.Runtime.CompilerServices
+{
+    /// <summary>Required by C# 9 <c>init</c>-only setters and <c>record</c> types.</summary>
+    internal static class IsExternalInit { }
+}
+
+namespace System.Runtime.Versioning
+{
+    /// <summary>
+    ///     Minimal shim for the .NET 5+ <c>SupportedOSPlatformAttribute</c>. Pure marker for the
+    ///     compiler on net10; on net48 we still want the attribute to exist so the same
+    ///     <c>[SupportedOSPlatform("windows")]</c> source compiles. The attribute is internal
+    ///     and attribute-targets-everything to minimize surface.
+    /// </summary>
+    [AttributeUsage(AttributeTargets.All, Inherited = false, AllowMultiple = true)]
+    internal sealed class SupportedOSPlatformAttribute(string platformName) : Attribute
+    {
+        public string PlatformName { get; } = platformName;
+    }
+}
+#endif

tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport/PrerequisiteCheck.cs

@@ -0,0 +1,44 @@
+namespace ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport;
+
+/// <summary>One prerequisite probe's outcome. <see cref="AvevaPrerequisites"/> returns many of these.</summary>
+/// <param name="Name">Short diagnostic id — e.g. <c>service:aaBootstrap</c>, <c>sql:ZB</c>, <c>registry:ArchestrA.Framework</c>.</param>
+/// <param name="Category">Which subsystem the probe belongs to — lets callers filter (e.g. "Historian warns don't gate the core Galaxy smoke").</param>
+/// <param name="Status">Outcome.</param>
+/// <param name="Detail">One-line specific message an operator can act on — <c>"aaGR not installed — install the Galaxy Repository role from the System Platform setup"</c> beats <c>"failed"</c>.</param>
+public sealed record PrerequisiteCheck(
+    string Name,
+    PrerequisiteCategory Category,
+    PrerequisiteStatus Status,
+    string Detail);
+
+public enum PrerequisiteStatus
+{
+    /// <summary>Prerequisite is met; no action needed.</summary>
+    Pass,
+    /// <summary>Soft dependency missing — stack still runs but some feature (e.g. logging) is degraded.</summary>
+    Warn,
+    /// <summary>Hard dependency missing — live tests can't proceed; <see cref="PrerequisiteReport.SkipReason"/> surfaces this.</summary>
+    Fail,
+    /// <summary>Probe wasn't applicable in this environment (e.g. non-Windows host, Historian not installed).</summary>
+    Skip,
+}
+
+public enum PrerequisiteCategory
+{
+    /// <summary>Platform sanity — process bitness, OS platform, DCOM/RPCSS.</summary>
+    Environment,
+    /// <summary>Hard-required AVEVA Windows services (aaBootstrap, aaGR, NmxSvc).</summary>
+    AvevaCoreService,
+    /// <summary>Soft-required AVEVA Windows services (aaLogger, aaUserValidator) — warn only.</summary>
+    AvevaSoftService,
+    /// <summary>ArchestrA Framework install markers (registry + files).</summary>
+    AvevaInstall,
+    /// <summary>MXAccess COM server registration + file on disk.</summary>
+    MxAccessCom,
+    /// <summary>SQL Server reachability + ZB database presence + deployed-object count.</summary>
+    GalaxyRepository,
+    /// <summary>Historian services (optional — only required for HistoryRead IPC paths).</summary>
+    AvevaHistorian,
+    /// <summary>OtOpcUa-side services (OtOpcUa, OtOpcUaGalaxyHost) + third-party deps (GLAuth).</summary>
+    OtOpcUaService,
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport/PrerequisiteReport.cs

@@ -0,0 +1,94 @@
+using System.Text;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport;
+
+/// <summary>
+///     Aggregated result of an <see cref="AvevaPrerequisites.CheckAll"/> run. Test fixtures
+///     typically call <see cref="SkipReason"/> to produce the argument for xUnit's
+///     <c>Assert.Skip</c> when any hard dependency failed.
+/// </summary>
+public sealed class PrerequisiteReport
+{
+    public IReadOnlyList<PrerequisiteCheck> Checks { get; }
+
+    public PrerequisiteReport(IEnumerable<PrerequisiteCheck> checks)
+    {
+        Checks = [.. checks];
+    }
+
+    /// <summary>True when every probe is Pass / Warn / Skip — no Fail entries.</summary>
+    public bool IsLivetestReady => !Checks.Any(c => c.Status == PrerequisiteStatus.Fail);
+
+    /// <summary>
+    ///     True when only the AVEVA-side probes pass — ignores failures in the
+    ///     <see cref="PrerequisiteCategory.OtOpcUaService"/> category. Lets a live-test gate
+    ///     say "AVEVA is ready even if the v2 services aren't installed yet" without
+    ///     conflating the two. Useful for tests that exercise Galaxy directly (e.g.
+    ///     <see cref="GalaxyRepositoryLiveSmokeTests"/>) rather than through our stack.
+    /// </summary>
+    public bool IsAvevaSideReady =>
+        !Checks.Any(c => c.Status == PrerequisiteStatus.Fail && c.Category != PrerequisiteCategory.OtOpcUaService);
+
+    /// <summary>
+    ///     Multi-line message for <c>Assert.Skip</c> when a hard dependency isn't met. Returns
+    ///     null when <see cref="IsLivetestReady"/> is true.
+    /// </summary>
+    public string? SkipReason
+    {
+        get
+        {
+            var fails = Checks.Where(c => c.Status == PrerequisiteStatus.Fail).ToList();
+            if (fails.Count == 0) return null;
+
+            var sb = new StringBuilder();
+            sb.AppendLine($"Live-AVEVA prerequisites not met ({fails.Count} failed):");
+            foreach (var f in fails)
+                sb.AppendLine($"  • [{f.Category}] {f.Name} — {f.Detail}");
+            sb.Append("Run `Get-Service aa*` / `sqlcmd -S localhost -d ZB -E -Q \"SELECT 1\"` to triage.");
+            return sb.ToString();
+        }
+    }
+
+    /// <summary>
+    ///     Human-readable summary of warnings — caller decides whether to log or ignore. Useful
+    ///     when a live test does pass but an operator should know their environment is degraded.
+    /// </summary>
+    public string? Warnings
+    {
+        get
+        {
+            var warns = Checks.Where(c => c.Status == PrerequisiteStatus.Warn).ToList();
+            if (warns.Count == 0) return null;
+
+            var sb = new StringBuilder();
+            sb.AppendLine($"AVEVA prerequisites with warnings ({warns.Count}):");
+            foreach (var w in warns)
+                sb.AppendLine($"  • [{w.Category}] {w.Name} — {w.Detail}");
+            return sb.ToString();
+        }
+    }
+
+    /// <summary>
+    ///     Throw <see cref="InvalidOperationException"/> if any <paramref name="categories"/>
+    ///     contain a Fail — useful when a specific test needs, say, Galaxy Repository but doesn't
+    ///     care about Historian. Call before <c>Assert.Skip</c> if you want to be strict.
+    /// </summary>
+    public void RequireCategories(params PrerequisiteCategory[] categories)
+    {
+        var set = categories.ToHashSet();
+        var fails = Checks.Where(c => c.Status == PrerequisiteStatus.Fail && set.Contains(c.Category)).ToList();
+        if (fails.Count == 0) return;
+
+        var detail = string.Join("; ", fails.Select(f => $"{f.Name}: {f.Detail}"));
+        throw new InvalidOperationException($"Required prerequisite categories failed: {detail}");
+    }
+
+    public override string ToString()
+    {
+        var sb = new StringBuilder();
+        sb.AppendLine($"PrerequisiteReport: {Checks.Count} checks");
+        foreach (var c in Checks)
+            sb.AppendLine($"  [{c.Status,-4}] {c.Category}/{c.Name}: {c.Detail}");
+        return sb.ToString();
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport/Probes/MxAccessComProbe.cs

@@ -0,0 +1,102 @@
+using System.Runtime.InteropServices;
+using System.Runtime.Versioning;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport.Probes;
+
+/// <summary>
+///     Confirms MXAccess COM server registration by resolving the
+///     <c>LMXProxy.LMXProxyServer</c> ProgID to its CLSID, then checking that the CLSID's
+///     32-bit <c>InprocServer32</c> entry points at a file that exists on disk.
+/// </summary>
+/// <remarks>
+///     A common failure mode on partial installs: ProgID is registered but the CLSID
+///     InprocServer32 DLL is missing (previous install uninstalled but registry orphan remains).
+///     This probe surfaces that case with an actionable message instead of the
+///     <c>0x80040154 REGDB_E_CLASSNOTREG</c> you'd see from a late COM activation failure.
+/// </remarks>
+public static class MxAccessComProbe
+{
+    public const string ProgId = "LMXProxy.LMXProxyServer";
+    public const string VersionedProgId = "LMXProxy.LMXProxyServer.1";
+
+    public static PrerequisiteCheck Check()
+    {
+        if (!RuntimeInformation.IsOSPlatform(OSPlatform.Windows))
+        {
+            return new PrerequisiteCheck("com:LMXProxy", PrerequisiteCategory.MxAccessCom,
+                PrerequisiteStatus.Skip, "COM registration probes only run on Windows.");
+        }
+        return CheckWindows();
+    }
+
+    [SupportedOSPlatform("windows")]
+    private static PrerequisiteCheck CheckWindows()
+    {
+        try
+        {
+            var (clsid, dll) = RegistryProbe.ResolveProgIdToInproc(ProgId);
+            if (clsid is null)
+            {
+                return new PrerequisiteCheck("com:LMXProxy", PrerequisiteCategory.MxAccessCom,
+                    PrerequisiteStatus.Fail,
+                    $"ProgID {ProgId} not registered — MXAccess COM server isn't installed. " +
+                    $"Install System Platform's MXAccess component and re-run.");
+            }
+
+            if (string.IsNullOrWhiteSpace(dll))
+            {
+                return new PrerequisiteCheck("com:LMXProxy", PrerequisiteCategory.MxAccessCom,
+                    PrerequisiteStatus.Fail,
+                    $"ProgID {ProgId} → CLSID {clsid} but InprocServer32 is empty. " +
+                    $"Registry is orphaned; re-register with: regsvr32 /s LmxProxy.dll (from an elevated cmd in the Framework bin dir).");
+            }
+
+            // Resolve the recorded path — sometimes registered as a bare filename that the COM
+            // runtime resolves via the current process's DLL-search path. Accept either an
+            // absolute path that exists, or a bare filename whose resolution we can't verify
+            // without loading it (treat as Pass-with-note).
+            if (Path.IsPathRooted(dll))
+            {
+                if (!File.Exists(dll))
+                {
+                    return new PrerequisiteCheck("com:LMXProxy", PrerequisiteCategory.MxAccessCom,
+                        PrerequisiteStatus.Fail,
+                        $"ProgID {ProgId} → CLSID {clsid} → InprocServer32 {dll}, but the file is missing. " +
+                        $"Re-install the Framework or restore from backup.");
+                }
+                return new PrerequisiteCheck("com:LMXProxy", PrerequisiteCategory.MxAccessCom,
+                    PrerequisiteStatus.Pass,
+                    $"ProgID {ProgId} → {dll} (file exists).");
+            }
+
+            return new PrerequisiteCheck("com:LMXProxy", PrerequisiteCategory.MxAccessCom,
+                PrerequisiteStatus.Pass,
+                $"ProgID {ProgId} → {dll} (bare filename — relies on PATH resolution at COM activation time).");
+        }
+        catch (Exception ex)
+        {
+            return new PrerequisiteCheck("com:LMXProxy", PrerequisiteCategory.MxAccessCom,
+                PrerequisiteStatus.Warn,
+                $"Probe failed: {ex.GetType().Name}: {ex.Message}");
+        }
+    }
+
+    /// <summary>
+    ///     Warn when running as a 64-bit process — MXAccess COM activation will fail with
+    ///     <c>0x80040154</c> regardless of registration state. The production drivers run net48
+    ///     x86; xunit hosts run 64-bit by default so this often surfaces first.
+    /// </summary>
+    public static PrerequisiteCheck CheckProcessBitness()
+    {
+        if (Environment.Is64BitProcess)
+        {
+            return new PrerequisiteCheck("env:ProcessBitness", PrerequisiteCategory.Environment,
+                PrerequisiteStatus.Warn,
+                "Test host is 64-bit. Direct MXAccess COM activation would fail with REGDB_E_CLASSNOTREG (0x80040154); " +
+                "the production driver workaround is to run Galaxy.Host as a 32-bit process. Tests that only " +
+                "talk to the Host service over the named pipe aren't affected.");
+        }
+        return new PrerequisiteCheck("env:ProcessBitness", PrerequisiteCategory.Environment,
+            PrerequisiteStatus.Pass, "Test host is 32-bit.");
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport/Probes/NamedPipeProbe.cs

@@ -0,0 +1,59 @@
+using System.IO.Pipes;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport.Probes;
+
+/// <summary>
+///     Verifies the <c>OtOpcUaGalaxyHost</c> named-pipe endpoint is accepting connections —
+///     the handshake the Proxy performs at boot. A clean pipe connect without sending any
+///     framed message proves the Host service is listening; we disconnect immediately so we
+///     don't consume a session slot.
+/// </summary>
+/// <remarks>
+///     Default pipe name matches the installer script's <c>OTOPCUA_GALAXY_PIPE</c> default.
+///     Override when the Host service was installed with a non-default name (custom deployments).
+/// </remarks>
+public static class NamedPipeProbe
+{
+    public const string DefaultGalaxyHostPipeName = "OtOpcUaGalaxy";
+
+    public static async Task<PrerequisiteCheck> CheckGalaxyHostPipeAsync(
+        string? pipeName = null, CancellationToken ct = default)
+    {
+        pipeName ??= DefaultGalaxyHostPipeName;
+        try
+        {
+            using var client = new NamedPipeClientStream(
+                serverName: ".",
+                pipeName: pipeName,
+                direction: PipeDirection.InOut,
+                options: PipeOptions.Asynchronous);
+            using var cts = CancellationTokenSource.CreateLinkedTokenSource(ct);
+            cts.CancelAfter(TimeSpan.FromSeconds(2));
+            await client.ConnectAsync(cts.Token);
+
+            return new PrerequisiteCheck("pipe:OtOpcUaGalaxyHost", PrerequisiteCategory.OtOpcUaService,
+                PrerequisiteStatus.Pass,
+                $@"Pipe \\.\pipe\{pipeName} accepted a connection — OtOpcUaGalaxyHost is listening.");
+        }
+        catch (OperationCanceledException)
+        {
+            return new PrerequisiteCheck("pipe:OtOpcUaGalaxyHost", PrerequisiteCategory.OtOpcUaService,
+                PrerequisiteStatus.Fail,
+                $@"Pipe \\.\pipe\{pipeName} not connectable within 2s — OtOpcUaGalaxyHost service isn't running. " +
+                "Start with: sc.exe start OtOpcUaGalaxyHost");
+        }
+        catch (TimeoutException)
+        {
+            return new PrerequisiteCheck("pipe:OtOpcUaGalaxyHost", PrerequisiteCategory.OtOpcUaService,
+                PrerequisiteStatus.Fail,
+                $@"Pipe \\.\pipe\{pipeName} connect timed out — service may be starting or stuck. " +
+                "Check: sc.exe query OtOpcUaGalaxyHost");
+        }
+        catch (Exception ex)
+        {
+            return new PrerequisiteCheck("pipe:OtOpcUaGalaxyHost", PrerequisiteCategory.OtOpcUaService,
+                PrerequisiteStatus.Fail,
+                $@"Pipe \\.\pipe\{pipeName} connect failed: {ex.GetType().Name}: {ex.Message}");
+        }
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport/Probes/RegistryProbe.cs

@@ -0,0 +1,162 @@
+using System.Runtime.InteropServices;
+using System.Runtime.Versioning;
+using Microsoft.Win32;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport.Probes;
+
+/// <summary>
+///     Reads HKLM registry keys to confirm ArchestrA Framework / System Platform install
+///     markers. Matches the registered paths documented in
+///     <c>docs/v2/implementation/</c> — System Platform is 32-bit so keys live under
+///     <c>HKLM\SOFTWARE\WOW6432Node\ArchestrA\...</c>.
+/// </summary>
+public static class RegistryProbe
+{
+    // Canonical install roots per the research on our dev box (System Platform 2020 R2).
+    public const string ArchestrARootKey = @"SOFTWARE\WOW6432Node\ArchestrA";
+    public const string FrameworkKey = @"SOFTWARE\WOW6432Node\ArchestrA\Framework";
+    public const string PlatformKey = @"SOFTWARE\WOW6432Node\ArchestrA\Framework\Platform";
+    public const string MsiInstallKey = @"SOFTWARE\WOW6432Node\ArchestrA\MSIInstall";
+
+    public static PrerequisiteCheck CheckFrameworkInstalled()
+    {
+        if (!RuntimeInformation.IsOSPlatform(OSPlatform.Windows))
+        {
+            return new PrerequisiteCheck("registry:ArchestrA.Framework", PrerequisiteCategory.AvevaInstall,
+                PrerequisiteStatus.Skip, "Registry probes only run on Windows.");
+        }
+        return FrameworkInstalledWindows();
+    }
+
+    public static PrerequisiteCheck CheckPlatformDeployed()
+    {
+        if (!RuntimeInformation.IsOSPlatform(OSPlatform.Windows))
+        {
+            return new PrerequisiteCheck("registry:ArchestrA.Platform", PrerequisiteCategory.AvevaInstall,
+                PrerequisiteStatus.Skip, "Registry probes only run on Windows.");
+        }
+        return PlatformDeployedWindows();
+    }
+
+    public static PrerequisiteCheck CheckRebootPending()
+    {
+        if (!RuntimeInformation.IsOSPlatform(OSPlatform.Windows))
+        {
+            return new PrerequisiteCheck("registry:ArchestrA.RebootPending", PrerequisiteCategory.AvevaInstall,
+                PrerequisiteStatus.Skip, "Registry probes only run on Windows.");
+        }
+        return RebootPendingWindows();
+    }
+
+    [SupportedOSPlatform("windows")]
+    private static PrerequisiteCheck FrameworkInstalledWindows()
+    {
+        try
+        {
+            using var key = Registry.LocalMachine.OpenSubKey(FrameworkKey);
+            if (key is null)
+            {
+                return new PrerequisiteCheck("registry:ArchestrA.Framework", PrerequisiteCategory.AvevaInstall,
+                    PrerequisiteStatus.Fail,
+                    $"Missing {FrameworkKey} — ArchestrA Framework isn't installed. Install AVEVA System Platform from the setup media.");
+            }
+
+            var installPath = key.GetValue("InstallPath") as string;
+            var rootPath = key.GetValue("RootPath") as string;
+            if (string.IsNullOrWhiteSpace(installPath) || string.IsNullOrWhiteSpace(rootPath))
+            {
+                return new PrerequisiteCheck("registry:ArchestrA.Framework", PrerequisiteCategory.AvevaInstall,
+                    PrerequisiteStatus.Warn,
+                    $"Framework key exists but InstallPath/RootPath values missing — install may be incomplete.");
+            }
+
+            return new PrerequisiteCheck("registry:ArchestrA.Framework", PrerequisiteCategory.AvevaInstall,
+                PrerequisiteStatus.Pass,
+                $"Installed at {installPath} (RootPath {rootPath}).");
+        }
+        catch (Exception ex)
+        {
+            return new PrerequisiteCheck("registry:ArchestrA.Framework", PrerequisiteCategory.AvevaInstall,
+                PrerequisiteStatus.Warn,
+                $"Probe failed: {ex.GetType().Name}: {ex.Message}");
+        }
+    }
+
+    [SupportedOSPlatform("windows")]
+    private static PrerequisiteCheck PlatformDeployedWindows()
+    {
+        try
+        {
+            using var key = Registry.LocalMachine.OpenSubKey(PlatformKey);
+            var pfeConfig = key?.GetValue("PfeConfigOptions") as string;
+            if (string.IsNullOrWhiteSpace(pfeConfig))
+            {
+                return new PrerequisiteCheck("registry:ArchestrA.Platform.Deployed", PrerequisiteCategory.AvevaInstall,
+                    PrerequisiteStatus.Warn,
+                    $"No Platform object deployed locally (Platform\\PfeConfigOptions empty). MXAccess will connect but subscriptions will fail. Deploy a Platform from the IDE.");
+            }
+
+            // PfeConfigOptions format: "PlatformId=N,EngineId=N,EngineName=...,..."
+            // A non-deployed state leaves PlatformId=0 or the key empty.
+            if (pfeConfig.Contains("PlatformId=0,", StringComparison.OrdinalIgnoreCase))
+            {
+                return new PrerequisiteCheck("registry:ArchestrA.Platform.Deployed", PrerequisiteCategory.AvevaInstall,
+                    PrerequisiteStatus.Warn,
+                    $"Platform never deployed (PfeConfigOptions has PlatformId=0). Deploy a Platform from the IDE before running live tests.");
+            }
+
+            return new PrerequisiteCheck("registry:ArchestrA.Platform.Deployed", PrerequisiteCategory.AvevaInstall,
+                PrerequisiteStatus.Pass,
+                $"Platform deployed ({pfeConfig}).");
+        }
+        catch (Exception ex)
+        {
+            return new PrerequisiteCheck("registry:ArchestrA.Platform.Deployed", PrerequisiteCategory.AvevaInstall,
+                PrerequisiteStatus.Warn,
+                $"Probe failed: {ex.GetType().Name}: {ex.Message}");
+        }
+    }
+
+    [SupportedOSPlatform("windows")]
+    private static PrerequisiteCheck RebootPendingWindows()
+    {
+        try
+        {
+            using var key = Registry.LocalMachine.OpenSubKey(MsiInstallKey);
+            var rebootRequired = key?.GetValue("RebootRequired") as string;
+            if (string.Equals(rebootRequired, "True", StringComparison.OrdinalIgnoreCase))
+            {
+                return new PrerequisiteCheck("registry:ArchestrA.RebootPending", PrerequisiteCategory.AvevaInstall,
+                    PrerequisiteStatus.Warn,
+                    "An ArchestrA patch has been installed but the machine hasn't rebooted. Post-patch behavior is undefined until a reboot.");
+            }
+            return new PrerequisiteCheck("registry:ArchestrA.RebootPending", PrerequisiteCategory.AvevaInstall,
+                PrerequisiteStatus.Pass,
+                "No pending reboot flagged.");
+        }
+        catch (Exception ex)
+        {
+            return new PrerequisiteCheck("registry:ArchestrA.RebootPending", PrerequisiteCategory.AvevaInstall,
+                PrerequisiteStatus.Warn,
+                $"Probe failed: {ex.GetType().Name}: {ex.Message}");
+        }
+    }
+
+    /// <summary>
+    ///     Read the registered <see cref="ComProgIdCheck"/> CLSID for the given ProgID and
+    ///     resolve the 32-bit <c>InprocServer32</c> file path. Returns null when either is missing.
+    /// </summary>
+    [SupportedOSPlatform("windows")]
+    internal static (string? Clsid, string? InprocDllPath) ResolveProgIdToInproc(string progId)
+    {
+        using var progIdKey = Registry.ClassesRoot.OpenSubKey($@"{progId}\CLSID");
+        var clsid = progIdKey?.GetValue(null) as string;
+        if (string.IsNullOrWhiteSpace(clsid)) return (null, null);
+
+        // 32-bit COM server under Wow6432Node\CLSID\{guid}\InprocServer32 default value.
+        using var inproc = Registry.LocalMachine.OpenSubKey(
+            $@"SOFTWARE\Classes\WOW6432Node\CLSID\{clsid}\InprocServer32");
+        var dll = inproc?.GetValue(null) as string;
+        return (clsid, dll);
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport/Probes/ServiceProbe.cs

@@ -0,0 +1,85 @@
+using System.Runtime.InteropServices;
+using System.Runtime.Versioning;
+using System.ServiceProcess;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport.Probes;
+
+/// <summary>
+///     Queries the Windows Service Control Manager to report whether a named service is
+///     installed, its current state, and its start type. Non-Windows hosts return Skip.
+/// </summary>
+public static class ServiceProbe
+{
+    public static PrerequisiteCheck Check(
+        string serviceName,
+        PrerequisiteCategory category,
+        bool hardRequired,
+        string whatItDoes)
+    {
+        if (!RuntimeInformation.IsOSPlatform(OSPlatform.Windows))
+        {
+            return new PrerequisiteCheck(
+                Name: $"service:{serviceName}",
+                Category: category,
+                Status: PrerequisiteStatus.Skip,
+                Detail: "Service probes only run on Windows.");
+        }
+
+        return CheckWindows(serviceName, category, hardRequired, whatItDoes);
+    }
+
+    [SupportedOSPlatform("windows")]
+    private static PrerequisiteCheck CheckWindows(
+        string serviceName, PrerequisiteCategory category, bool hardRequired, string whatItDoes)
+    {
+        try
+        {
+            using var sc = new ServiceController(serviceName);
+            // Touch the Status to force the SCM lookup; if the service doesn't exist, this throws
+            // InvalidOperationException with message "Service ... was not found on computer.".
+            var status = sc.Status;
+            var startType = sc.StartType;
+
+            return status switch
+            {
+                ServiceControllerStatus.Running => new PrerequisiteCheck(
+                    $"service:{serviceName}", category, PrerequisiteStatus.Pass,
+                    $"Running ({whatItDoes})"),
+
+                // DemandStart services (like NmxSvc) that are Stopped are not necessarily a
+                // failure — the master service (aaBootstrap) brings them up on demand. Treat
+                // Stopped+Demand as Warn so operators know the situation but tests still proceed.
+                ServiceControllerStatus.Stopped when startType == ServiceStartMode.Manual =>
+                    new PrerequisiteCheck(
+                        $"service:{serviceName}", category, PrerequisiteStatus.Warn,
+                        $"Installed but Stopped (start type Manual — {whatItDoes}). " +
+                        "Will be pulled up on demand by the master service; fine for tests."),
+
+                ServiceControllerStatus.Stopped => Fail(
+                    $"Installed but Stopped. Start with: sc.exe start {serviceName}  ({whatItDoes})"),
+
+                _ => new PrerequisiteCheck(
+                    $"service:{serviceName}", category, PrerequisiteStatus.Warn,
+                    $"Transitional state {status} ({whatItDoes}) — try again in a few seconds."),
+            };
+
+            PrerequisiteCheck Fail(string detail) => new(
+                $"service:{serviceName}", category,
+                hardRequired ? PrerequisiteStatus.Fail : PrerequisiteStatus.Warn,
+                detail);
+        }
+        catch (InvalidOperationException ex) when (ex.Message.Contains("was not found", StringComparison.OrdinalIgnoreCase))
+        {
+            return new PrerequisiteCheck(
+                $"service:{serviceName}", category,
+                hardRequired ? PrerequisiteStatus.Fail : PrerequisiteStatus.Warn,
+                $"Not installed ({whatItDoes}). Install the relevant System Platform component and retry.");
+        }
+        catch (Exception ex)
+        {
+            return new PrerequisiteCheck(
+                $"service:{serviceName}", category, PrerequisiteStatus.Warn,
+                $"Probe failed ({ex.GetType().Name}: {ex.Message}) — treat as unknown.");
+        }
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport/Probes/SqlProbe.cs

@@ -0,0 +1,88 @@
+using Microsoft.Data.SqlClient;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport.Probes;
+
+/// <summary>
+///     Verifies the Galaxy Repository SQL side: SQL Server reachable, <c>ZB</c> database
+///     present, and at least one deployed object exists (so live tests have something to read).
+///     Reuses the Windows-auth connection string the repo code defaults to.
+/// </summary>
+public static class SqlProbe
+{
+    public const string DefaultConnectionString =
+        "Server=localhost;Database=ZB;Integrated Security=True;TrustServerCertificate=True;Encrypt=False;Connect Timeout=3;";
+
+    public static async Task<PrerequisiteCheck> CheckZbDatabaseAsync(
+        string? connectionString = null, CancellationToken ct = default)
+    {
+        connectionString ??= DefaultConnectionString;
+        try
+        {
+            using var conn = new SqlConnection(connectionString);
+            await conn.OpenAsync(ct);
+
+            // DB_ID returns null when the database doesn't exist on the connected server — distinct
+            // failure mode from "server unreachable", deserves a distinct message.
+            using var cmd = conn.CreateCommand();
+            cmd.CommandText = "SELECT DB_ID('ZB')";
+            var dbIdObj = await cmd.ExecuteScalarAsync(ct);
+            if (dbIdObj is null || dbIdObj is DBNull)
+            {
+                return new PrerequisiteCheck("sql:ZB", PrerequisiteCategory.GalaxyRepository,
+                    PrerequisiteStatus.Fail,
+                    "SQL Server reachable but database ZB does not exist. " +
+                    "Create the Galaxy from the IDE or restore a .cab backup.");
+            }
+
+            return new PrerequisiteCheck("sql:ZB", PrerequisiteCategory.GalaxyRepository,
+                PrerequisiteStatus.Pass, "Connected; ZB database exists.");
+        }
+        catch (SqlException ex)
+        {
+            return new PrerequisiteCheck("sql:ZB", PrerequisiteCategory.GalaxyRepository,
+                PrerequisiteStatus.Fail,
+                $"SQL Server unreachable: {ex.Message}. Ensure MSSQLSERVER service is running (sc.exe start MSSQLSERVER) and TCP 1433 is open.");
+        }
+        catch (Exception ex)
+        {
+            return new PrerequisiteCheck("sql:ZB", PrerequisiteCategory.GalaxyRepository,
+                PrerequisiteStatus.Fail,
+                $"Unexpected probe error: {ex.GetType().Name}: {ex.Message}");
+        }
+    }
+
+    /// <summary>
+    ///     Returns the count of deployed Galaxy objects (<c>deployed_version &gt; 0</c>). Zero
+    ///     isn't a hard failure — lets someone boot a fresh Galaxy and still get meaningful
+    ///     test-suite output — but it IS a warning because any live-read smoke will have
+    ///     nothing to read.
+    /// </summary>
+    public static async Task<PrerequisiteCheck> CheckDeployedObjectCountAsync(
+        string? connectionString = null, CancellationToken ct = default)
+    {
+        connectionString ??= DefaultConnectionString;
+        try
+        {
+            using var conn = new SqlConnection(connectionString);
+            await conn.OpenAsync(ct);
+            using var cmd = conn.CreateCommand();
+            cmd.CommandText = "SELECT COUNT(*) FROM gobject WHERE deployed_version > 0";
+            var countObj = await cmd.ExecuteScalarAsync(ct);
+            var count = countObj is int i ? i : 0;
+
+            return count > 0
+                ? new PrerequisiteCheck("sql:ZB.deployedObjects", PrerequisiteCategory.GalaxyRepository,
+                    PrerequisiteStatus.Pass, $"{count} objects deployed — live reads have data to return.")
+                : new PrerequisiteCheck("sql:ZB.deployedObjects", PrerequisiteCategory.GalaxyRepository,
+                    PrerequisiteStatus.Warn,
+                    "ZB contains no deployed objects. Discovery smoke tests will return empty hierarchies; " +
+                    "deploy at least a Platform + AppEngine from the IDE to exercise the read path.");
+        }
+        catch (Exception ex)
+        {
+            return new PrerequisiteCheck("sql:ZB.deployedObjects", PrerequisiteCategory.GalaxyRepository,
+                PrerequisiteStatus.Warn,
+                $"Couldn't count deployed objects: {ex.GetType().Name}: {ex.Message}");
+        }
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport/ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport.csproj

@@ -0,0 +1,38 @@
+<Project Sdk="Microsoft.NET.Sdk">
+
+    <PropertyGroup>
+        <!-- Multi-target: net10.0 for modern consumer projects (Galaxy.Proxy.Tests, E2E, Admin.Tests),
+             net48 for the Galaxy.Host.Tests project that has to stay on .NET Framework x86 for its
+             MXAccess-COM parent project. The helper uses no OS-level APIs that differ between the
+             two frameworks (registry / SQL / ServiceController are surface-compatible). -->
+        <TargetFrameworks>net10.0;net48</TargetFrameworks>
+        <Nullable>enable</Nullable>
+        <ImplicitUsings>enable</ImplicitUsings>
+        <LangVersion>latest</LangVersion>
+        <IsPackable>false</IsPackable>
+        <RootNamespace>ZB.MOM.WW.OtOpcUa.Driver.Galaxy.TestSupport</RootNamespace>
+    </PropertyGroup>
+
+    <ItemGroup Condition="'$(TargetFramework)' == 'net10.0'">
+        <!-- System.ServiceProcess.ServiceController + Microsoft.Win32.Registry are cross-platform
+             assemblies that throw PlatformNotSupportedException on non-Windows; the probes in
+             this project guard with RuntimeInformation.IsOSPlatform(OSPlatform.Windows) so they
+             return Skip on Linux/macOS rather than crashing the test host. -->
+        <PackageReference Include="System.ServiceProcess.ServiceController" Version="10.0.0"/>
+        <PackageReference Include="Microsoft.Win32.Registry" Version="5.0.0"/>
+        <PackageReference Include="Microsoft.Data.SqlClient" Version="6.0.1"/>
+    </ItemGroup>
+
+    <ItemGroup Condition="'$(TargetFramework)' == 'net48'">
+        <!-- net48 ships System.ServiceProcess + Microsoft.Win32 in-box via BCL references. -->
+        <Reference Include="System.ServiceProcess"/>
+        <!-- Microsoft.Data.SqlClient v6 supports net462+; single-target for consistency. -->
+        <PackageReference Include="Microsoft.Data.SqlClient" Version="6.0.1"/>
+    </ItemGroup>
+
+    <ItemGroup>
+        <NuGetAuditSuppress Include="https://github.com/advisories/GHSA-37gx-xxp4-5rgx"/>
+        <NuGetAuditSuppress Include="https://github.com/advisories/GHSA-w3x6-4m5h-cxqf"/>
+    </ItemGroup>
+
+</Project>

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/DL205/DL205BcdQuirkTests.cs

@@ -0,0 +1,56 @@
+using Shouldly;
+using Xunit;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests.DL205;
+
+/// <summary>
+///     Verifies DL205/DL260 binary-coded-decimal register handling against the
+///     <c>dl205.json</c> pymodbus profile. HR[1072] = 0x1234 on the profile represents
+///     decimal 1234 (BCD nibbles). Reading it as <see cref="ModbusDataType.Int16"/> would
+///     return 0x1234 = 4660; the <see cref="ModbusDataType.Bcd16"/> path decodes 1234.
+/// </summary>
+[Collection(ModbusSimulatorCollection.Name)]
+[Trait("Category", "Integration")]
+[Trait("Device", "DL205")]
+public sealed class DL205BcdQuirkTests(ModbusSimulatorFixture sim)
+{
+    [Fact]
+    public async Task DL205_BCD16_decodes_HR1072_as_decimal_1234()
+    {
+        if (sim.SkipReason is not null) Assert.Skip(sim.SkipReason);
+        if (!string.Equals(Environment.GetEnvironmentVariable("MODBUS_SIM_PROFILE"), "dl205",
+                StringComparison.OrdinalIgnoreCase))
+        {
+            Assert.Skip("MODBUS_SIM_PROFILE != dl205 — skipping (standard profile does not seed HR[1072]).");
+        }
+
+        var options = new ModbusDriverOptions
+        {
+            Host = sim.Host,
+            Port = sim.Port,
+            UnitId = 1,
+            Timeout = TimeSpan.FromSeconds(2),
+            Tags =
+            [
+                new ModbusTagDefinition("DL205_Count_Bcd",
+                    ModbusRegion.HoldingRegisters, Address: 1072,
+                    DataType: ModbusDataType.Bcd16, Writable: false),
+                new ModbusTagDefinition("DL205_Count_Int16",
+                    ModbusRegion.HoldingRegisters, Address: 1072,
+                    DataType: ModbusDataType.Int16, Writable: false),
+            ],
+            Probe = new ModbusProbeOptions { Enabled = false },
+        };
+        await using var driver = new ModbusDriver(options, driverInstanceId: "dl205-bcd");
+        await driver.InitializeAsync("{}", TestContext.Current.CancellationToken);
+
+        var results = await driver.ReadAsync(["DL205_Count_Bcd", "DL205_Count_Int16"],
+            TestContext.Current.CancellationToken);
+
+        results[0].StatusCode.ShouldBe(0u);
+        results[0].Value.ShouldBe(1234, "DL205 BCD register 0x1234 represents decimal 1234 per the DirectLOGIC convention");
+
+        results[1].StatusCode.ShouldBe(0u);
+        results[1].Value.ShouldBe((short)0x1234, "same register read as Int16 returns the raw 0x1234 = 4660 value — proves BCD path is distinct");
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/DL205/DL205CoilMappingTests.cs

@@ -0,0 +1,109 @@
+using Shouldly;
+using Xunit;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests.DL205;
+
+/// <summary>
+///     Verifies DL260 I/O-memory coil mappings against the <c>dl205.json</c> pymodbus profile.
+///     DirectLOGIC Y-outputs and C-relays are exposed to Modbus as FC01/FC05 coils, but at
+///     non-zero base addresses that confuse operators used to "Y0 is the first coil". The sim
+///     seeds Y0 → coil 2048 = ON and C0 → coil 3072 = ON as fixed markers.
+/// </summary>
+[Collection(ModbusSimulatorCollection.Name)]
+[Trait("Category", "Integration")]
+[Trait("Device", "DL205")]
+public sealed class DL205CoilMappingTests(ModbusSimulatorFixture sim)
+{
+    [Fact]
+    public async Task DL260_Y0_maps_to_coil_2048()
+    {
+        if (sim.SkipReason is not null) Assert.Skip(sim.SkipReason);
+        if (!string.Equals(Environment.GetEnvironmentVariable("MODBUS_SIM_PROFILE"), "dl205",
+                StringComparison.OrdinalIgnoreCase))
+        {
+            Assert.Skip("MODBUS_SIM_PROFILE != dl205 — skipping.");
+        }
+
+        var coil = DirectLogicAddress.YOutputToCoil("Y0");
+        coil.ShouldBe((ushort)2048);
+
+        var options = BuildOptions(sim, [
+            new ModbusTagDefinition("DL260_Y0",
+                ModbusRegion.Coils, Address: coil,
+                DataType: ModbusDataType.Bool, Writable: false),
+        ]);
+        await using var driver = new ModbusDriver(options, driverInstanceId: "dl205-y0");
+        await driver.InitializeAsync("{}", TestContext.Current.CancellationToken);
+
+        var results = await driver.ReadAsync(["DL260_Y0"], TestContext.Current.CancellationToken);
+        results[0].StatusCode.ShouldBe(0u);
+        results[0].Value.ShouldBe(true, "dl205.json seeds coil 2048 (Y0) = ON");
+    }
+
+    [Fact]
+    public async Task DL260_C0_maps_to_coil_3072()
+    {
+        if (sim.SkipReason is not null) Assert.Skip(sim.SkipReason);
+        if (!string.Equals(Environment.GetEnvironmentVariable("MODBUS_SIM_PROFILE"), "dl205",
+                StringComparison.OrdinalIgnoreCase))
+        {
+            Assert.Skip("MODBUS_SIM_PROFILE != dl205 — skipping.");
+        }
+
+        var coil = DirectLogicAddress.CRelayToCoil("C0");
+        coil.ShouldBe((ushort)3072);
+
+        var options = BuildOptions(sim, [
+            new ModbusTagDefinition("DL260_C0",
+                ModbusRegion.Coils, Address: coil,
+                DataType: ModbusDataType.Bool, Writable: false),
+        ]);
+        await using var driver = new ModbusDriver(options, driverInstanceId: "dl205-c0");
+        await driver.InitializeAsync("{}", TestContext.Current.CancellationToken);
+
+        var results = await driver.ReadAsync(["DL260_C0"], TestContext.Current.CancellationToken);
+        results[0].StatusCode.ShouldBe(0u);
+        results[0].Value.ShouldBe(true, "dl205.json seeds coil 3072 (C0) = ON");
+    }
+
+    [Fact]
+    public async Task DL260_scratch_Crelay_supports_write_then_read()
+    {
+        if (sim.SkipReason is not null) Assert.Skip(sim.SkipReason);
+        if (!string.Equals(Environment.GetEnvironmentVariable("MODBUS_SIM_PROFILE"), "dl205",
+                StringComparison.OrdinalIgnoreCase))
+        {
+            Assert.Skip("MODBUS_SIM_PROFILE != dl205 — skipping.");
+        }
+
+        // Scratch C-relay at coil 4000 (per dl205.json _quirk note) is writable. Write=true then
+        // read back to confirm FC05 round-trip works against the DL-mapped coil bank.
+        var options = BuildOptions(sim, [
+            new ModbusTagDefinition("DL260_C_Scratch",
+                ModbusRegion.Coils, Address: 4000,
+                DataType: ModbusDataType.Bool, Writable: true),
+        ]);
+        await using var driver = new ModbusDriver(options, driverInstanceId: "dl205-cscratch");
+        await driver.InitializeAsync("{}", TestContext.Current.CancellationToken);
+
+        var writeResults = await driver.WriteAsync(
+            [new(FullReference: "DL260_C_Scratch", Value: true)],
+            TestContext.Current.CancellationToken);
+        writeResults[0].StatusCode.ShouldBe(0u);
+
+        var readResults = await driver.ReadAsync(["DL260_C_Scratch"], TestContext.Current.CancellationToken);
+        readResults[0].StatusCode.ShouldBe(0u);
+        readResults[0].Value.ShouldBe(true);
+    }
+
+    private static ModbusDriverOptions BuildOptions(ModbusSimulatorFixture sim, IReadOnlyList<ModbusTagDefinition> tags)
+        => new()
+        {
+            Host = sim.Host,
+            Port = sim.Port,
+            UnitId = 1,
+            Timeout = TimeSpan.FromSeconds(2),
+            Tags = tags,
+            Probe = new ModbusProbeOptions { Enabled = false },
+        };
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/DL205/DL205FloatCdabQuirkTests.cs

@@ -0,0 +1,64 @@
+using Shouldly;
+using Xunit;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests.DL205;
+
+/// <summary>
+///     Verifies DL205/DL260 CDAB word ordering for 32-bit floats against the
+///     <c>dl205.json</c> pymodbus profile. DirectLOGIC stores IEEE-754 singles with the low
+///     word at the lower register address (CDAB) rather than the high word (ABCD). Reading
+///     <c>HR[1056..1057]</c> with <see cref="ModbusByteOrder.BigEndian"/> produces a tiny
+///     denormal (~5.74e-41) instead of the intended 1.5f — a silent "value is 0" bug in the
+///     field unless the caller opts into <see cref="ModbusByteOrder.WordSwap"/>.
+/// </summary>
+[Collection(ModbusSimulatorCollection.Name)]
+[Trait("Category", "Integration")]
+[Trait("Device", "DL205")]
+public sealed class DL205FloatCdabQuirkTests(ModbusSimulatorFixture sim)
+{
+    [Fact]
+    public async Task DL205_Float32_CDAB_decodes_1_5f_from_HR1056()
+    {
+        if (sim.SkipReason is not null) Assert.Skip(sim.SkipReason);
+        if (!string.Equals(Environment.GetEnvironmentVariable("MODBUS_SIM_PROFILE"), "dl205",
+                StringComparison.OrdinalIgnoreCase))
+        {
+            Assert.Skip("MODBUS_SIM_PROFILE != dl205 — skipping (standard profile does not seed HR[1056..1057]).");
+        }
+
+        var options = new ModbusDriverOptions
+        {
+            Host = sim.Host,
+            Port = sim.Port,
+            UnitId = 1,
+            Timeout = TimeSpan.FromSeconds(2),
+            Tags =
+            [
+                new ModbusTagDefinition("DL205_Float_CDAB",
+                    ModbusRegion.HoldingRegisters, Address: 1056,
+                    DataType: ModbusDataType.Float32, Writable: false,
+                    ByteOrder: ModbusByteOrder.WordSwap),
+                // Control: same address, BigEndian — proves the default decode produces garbage.
+                new ModbusTagDefinition("DL205_Float_ABCD",
+                    ModbusRegion.HoldingRegisters, Address: 1056,
+                    DataType: ModbusDataType.Float32, Writable: false,
+                    ByteOrder: ModbusByteOrder.BigEndian),
+            ],
+            Probe = new ModbusProbeOptions { Enabled = false },
+        };
+        await using var driver = new ModbusDriver(options, driverInstanceId: "dl205-cdab");
+        await driver.InitializeAsync("{}", TestContext.Current.CancellationToken);
+
+        var results = await driver.ReadAsync(["DL205_Float_CDAB", "DL205_Float_ABCD"],
+            TestContext.Current.CancellationToken);
+
+        results[0].StatusCode.ShouldBe(0u);
+        results[0].Value.ShouldBe(1.5f, "DL205 Float32 with WordSwap (CDAB) must decode HR[1056..1057] as 1.5f");
+
+        // The BigEndian read of the same wire bytes should differ — not asserting the exact
+        // denormal value (that couples the test to IEEE-754 bit math) but the two decodes MUST
+        // disagree, otherwise the word-order flag is a no-op.
+        results[1].StatusCode.ShouldBe(0u);
+        results[1].Value.ShouldNotBe(1.5f);
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/DL205/DL205Profile.cs

@@ -0,0 +1,49 @@
+namespace ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests.DL205;
+
+/// <summary>
+///     Tag map for the AutomationDirect DL205 device class. Mirrors what the pymodbus
+///     <c>dl205.json</c> profile in <c>Pymodbus/dl205.json</c> exposes (or the real PLC, when
+///     <see cref="ModbusSimulatorFixture"/> is pointed at one).
+/// </summary>
+/// <remarks>
+///     This is the scaffold — each tag is deliberately generic so the smoke test has stable
+///     addresses to read. Device-specific quirk tests (word order, max-register, register-zero
+///     access, etc.) will land in their own test classes alongside this profile as the user
+///     validates each behavior in pymodbus; see <c>docs/v2/modbus-test-plan.md</c> §per-device
+///     quirk catalog for the checklist.
+/// </remarks>
+public static class DL205Profile
+{
+    /// <summary>
+    ///     Holding register the smoke test writes + reads. Address 200 is the first cell of the
+    ///     scratch HR range in both <c>Pymodbus/standard.json</c> (HR[200..209] = 0) and
+    ///     <c>Pymodbus/dl205.json</c> (HR[4096..4103] added in PR 43 for the same purpose), so
+    ///     the smoke test runs identically against either simulator profile. Originally
+    ///     targeted HR[100] — moved to HR[200] when the standard profile claimed HR[100] as
+    ///     the auto-incrementing register that drives subscribe-and-receive tests.
+    /// </summary>
+    public const ushort SmokeHoldingRegister = 200;
+
+    /// <summary>Value the smoke test writes then reads back to assert round-trip integrity.</summary>
+    public const short SmokeHoldingValue = 1234;
+
+    public static ModbusDriverOptions BuildOptions(string host, int port) => new()
+    {
+        Host = host,
+        Port = port,
+        UnitId = 1,
+        Timeout = TimeSpan.FromSeconds(2),
+        Tags =
+        [
+            new ModbusTagDefinition(
+                Name: "Smoke_HReg200",
+                Region: ModbusRegion.HoldingRegisters,
+                Address: SmokeHoldingRegister,
+                DataType: ModbusDataType.Int16,
+                Writable: true),
+        ],
+        // Disable the background probe loop — integration tests drive reads explicitly and
+        // the probe would race with assertions.
+        Probe = new ModbusProbeOptions { Enabled = false },
+    };
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/DL205/DL205SmokeTests.cs

@@ -0,0 +1,53 @@
+using Shouldly;
+using Xunit;
+using ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests.DL205;
+
+/// <summary>
+///     End-to-end smoke against the DL205 ModbusPal profile (or a real DL205 when
+///     <c>MODBUS_SIM_ENDPOINT</c> points at one). Drives the full <see cref="ModbusDriver"/>
+///     + real <see cref="ModbusTcpTransport"/> stack — no fake transport. Success proves the
+///     driver can initialize against the simulator, write a known value, and read it back
+///     with the correct status and value, which is the baseline every device-quirk test
+///     builds on.
+/// </summary>
+/// <remarks>
+///     Device-specific quirk tests (word order, max-register, register-zero access, exception
+///     code translation, etc.) land as separate test classes in this directory as each quirk
+///     is validated in ModbusPal. Keep this smoke test deliberately narrow — any deviation
+///     the driver hits beyond "happy-path FC16 + FC03 round-trip" belongs in its own named
+///     test so filtering by device class (<c>--filter DisplayName~DL205</c>) surfaces the
+///     quirk-specific failure mode.
+/// </remarks>
+[Collection(ModbusSimulatorCollection.Name)]
+[Trait("Category", "Integration")]
+[Trait("Device", "DL205")]
+public sealed class DL205SmokeTests(ModbusSimulatorFixture sim)
+{
+    [Fact]
+    public async Task DL205_roundtrip_write_then_read_of_holding_register()
+    {
+        if (sim.SkipReason is not null) Assert.Skip(sim.SkipReason);
+
+        var options = DL205Profile.BuildOptions(sim.Host, sim.Port);
+        await using var driver = new ModbusDriver(options, driverInstanceId: "dl205-smoke");
+        await driver.InitializeAsync(driverConfigJson: "{}", TestContext.Current.CancellationToken);
+
+        // Write first so the test is self-contained — ModbusPal's default register bank is
+        // zeroed at simulator start, and tests must not depend on prior-test state per the
+        // test-plan conventions.
+        var writeResults = await driver.WriteAsync(
+            [new(FullReference: "Smoke_HReg200", Value: (short)DL205Profile.SmokeHoldingValue)],
+            TestContext.Current.CancellationToken);
+        writeResults.Count.ShouldBe(1);
+        writeResults[0].StatusCode.ShouldBe(0u, "write must succeed against the ModbusPal DL205 profile");
+
+        var readResults = await driver.ReadAsync(
+            ["Smoke_HReg200"],
+            TestContext.Current.CancellationToken);
+        readResults.Count.ShouldBe(1);
+        readResults[0].StatusCode.ShouldBe(0u);
+        readResults[0].Value.ShouldBe((short)DL205Profile.SmokeHoldingValue);
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/DL205/DL205StringQuirkTests.cs

@@ -0,0 +1,81 @@
+using Shouldly;
+using Xunit;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests.DL205;
+
+/// <summary>
+///     Verifies the DL205/DL260 low-byte-first ASCII string packing quirk against the
+///     <c>dl205.json</c> pymodbus profile. Standard Modbus packs the first char of each pair
+///     in the high byte of the register; DirectLOGIC packs it in the low byte instead. Without
+///     <see cref="ModbusStringByteOrder.LowByteFirst"/> the driver decodes "eHllo" garbage
+///     even though the bytes on the wire are identical.
+/// </summary>
+/// <remarks>
+///     <para>
+///         Requires the dl205 profile (<c>Pymodbus\serve.ps1 -Profile dl205</c>). The standard
+///         profile does not seed HR[1040..1042] with string bytes, so running this against the
+///         standard profile returns <c>"\0\0\0\0\0"</c> and the test fails. Skip when the env
+///         var <c>MODBUS_SIM_PROFILE</c> is not set to <c>dl205</c>.
+///     </para>
+/// </remarks>
+[Collection(ModbusSimulatorCollection.Name)]
+[Trait("Category", "Integration")]
+[Trait("Device", "DL205")]
+public sealed class DL205StringQuirkTests(ModbusSimulatorFixture sim)
+{
+    [Fact]
+    public async Task DL205_string_low_byte_first_decodes_Hello_from_HR1040()
+    {
+        if (sim.SkipReason is not null) Assert.Skip(sim.SkipReason);
+        if (!string.Equals(Environment.GetEnvironmentVariable("MODBUS_SIM_PROFILE"), "dl205",
+                StringComparison.OrdinalIgnoreCase))
+        {
+            Assert.Skip("MODBUS_SIM_PROFILE != dl205 — skipping (standard profile does not seed HR[1040..1042]).");
+        }
+
+        var options = new ModbusDriverOptions
+        {
+            Host = sim.Host,
+            Port = sim.Port,
+            UnitId = 1,
+            Timeout = TimeSpan.FromSeconds(2),
+            Tags =
+            [
+                new ModbusTagDefinition(
+                    Name: "DL205_Hello_Low",
+                    Region: ModbusRegion.HoldingRegisters,
+                    Address: 1040,
+                    DataType: ModbusDataType.String,
+                    Writable: false,
+                    StringLength: 5,
+                    StringByteOrder: ModbusStringByteOrder.LowByteFirst),
+                // Control: same address, HighByteFirst, to prove the driver would have decoded
+                // garbage without the quirk flag.
+                new ModbusTagDefinition(
+                    Name: "DL205_Hello_High",
+                    Region: ModbusRegion.HoldingRegisters,
+                    Address: 1040,
+                    DataType: ModbusDataType.String,
+                    Writable: false,
+                    StringLength: 5,
+                    StringByteOrder: ModbusStringByteOrder.HighByteFirst),
+            ],
+            Probe = new ModbusProbeOptions { Enabled = false },
+        };
+        await using var driver = new ModbusDriver(options, driverInstanceId: "dl205-string");
+        await driver.InitializeAsync(driverConfigJson: "{}", TestContext.Current.CancellationToken);
+
+        var results = await driver.ReadAsync(["DL205_Hello_Low", "DL205_Hello_High"],
+            TestContext.Current.CancellationToken);
+
+        results.Count.ShouldBe(2);
+        results[0].StatusCode.ShouldBe(0u);
+        results[0].Value.ShouldBe("Hello", "DL205 low-byte-first ordering must produce 'Hello' from HR[1040..1042]");
+
+        // The high-byte-first read of the same wire bytes should differ — not asserting the
+        // exact garbage string (that would couple the test to the ASCII byte math) but the two
+        // decodes MUST disagree, otherwise the quirk flag is a no-op.
+        results[1].StatusCode.ShouldBe(0u);
+        results[1].Value.ShouldNotBe("Hello");
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/DL205/DL205VMemoryQuirkTests.cs

@@ -0,0 +1,91 @@
+using Shouldly;
+using Xunit;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests.DL205;
+
+/// <summary>
+///     Verifies the DL205/DL260 V-memory octal addressing quirk end-to-end: use
+///     <see cref="DirectLogicAddress.UserVMemoryToPdu"/> to translate <c>V2000</c> octal into
+///     the Modbus PDU address actually dispatched, then read the marker the dl205.json profile
+///     placed at that address. HR[0x0400] = 0x2000 proves the translation was performed
+///     correctly — a naïve caller treating "V2000" as decimal 2000 would read HR[2000] (which
+///     the profile leaves at 0) and miss the marker entirely.
+/// </summary>
+[Collection(ModbusSimulatorCollection.Name)]
+[Trait("Category", "Integration")]
+[Trait("Device", "DL205")]
+public sealed class DL205VMemoryQuirkTests(ModbusSimulatorFixture sim)
+{
+    [Fact]
+    public async Task DL205_V2000_user_memory_resolves_to_PDU_0x0400_marker()
+    {
+        if (sim.SkipReason is not null) Assert.Skip(sim.SkipReason);
+        if (!string.Equals(Environment.GetEnvironmentVariable("MODBUS_SIM_PROFILE"), "dl205",
+                StringComparison.OrdinalIgnoreCase))
+        {
+            Assert.Skip("MODBUS_SIM_PROFILE != dl205 — skipping (standard profile does not seed V-memory markers).");
+        }
+
+        var pdu = DirectLogicAddress.UserVMemoryToPdu("V2000");
+        pdu.ShouldBe((ushort)0x0400);
+
+        var options = new ModbusDriverOptions
+        {
+            Host = sim.Host,
+            Port = sim.Port,
+            UnitId = 1,
+            Timeout = TimeSpan.FromSeconds(2),
+            Tags =
+            [
+                new ModbusTagDefinition("DL205_V2000",
+                    ModbusRegion.HoldingRegisters, Address: pdu,
+                    DataType: ModbusDataType.UInt16, Writable: false),
+            ],
+            Probe = new ModbusProbeOptions { Enabled = false },
+        };
+        await using var driver = new ModbusDriver(options, driverInstanceId: "dl205-vmem");
+        await driver.InitializeAsync("{}", TestContext.Current.CancellationToken);
+
+        var results = await driver.ReadAsync(["DL205_V2000"], TestContext.Current.CancellationToken);
+        results[0].StatusCode.ShouldBe(0u);
+        results[0].Value.ShouldBe((ushort)0x2000, "dl205.json seeds HR[0x0400] with marker 0x2000 (= V2000 value)");
+    }
+
+    [Fact]
+    public async Task DL205_V40400_system_memory_resolves_to_PDU_0x2100_marker()
+    {
+        if (sim.SkipReason is not null) Assert.Skip(sim.SkipReason);
+        if (!string.Equals(Environment.GetEnvironmentVariable("MODBUS_SIM_PROFILE"), "dl205",
+                StringComparison.OrdinalIgnoreCase))
+        {
+            Assert.Skip("MODBUS_SIM_PROFILE != dl205 — skipping.");
+        }
+
+        // V40400 is system memory on DL260 / H2-ECOM100 absolute mode; it does NOT follow the
+        // simple octal-to-decimal formula (40400 octal = 16640 decimal, which would read HR[0x4100]).
+        // The CPU places the system bank at PDU 0x2100 instead. Proving the helper routes there.
+        var pdu = DirectLogicAddress.SystemVMemoryToPdu(0);
+        pdu.ShouldBe((ushort)0x2100);
+
+        var options = new ModbusDriverOptions
+        {
+            Host = sim.Host,
+            Port = sim.Port,
+            UnitId = 1,
+            Timeout = TimeSpan.FromSeconds(2),
+            Tags =
+            [
+                new ModbusTagDefinition("DL205_V40400",
+                    ModbusRegion.HoldingRegisters, Address: pdu,
+                    DataType: ModbusDataType.UInt16, Writable: false),
+            ],
+            Probe = new ModbusProbeOptions { Enabled = false },
+        };
+        await using var driver = new ModbusDriver(options, driverInstanceId: "dl205-sysv");
+        await driver.InitializeAsync("{}", TestContext.Current.CancellationToken);
+
+        var results = await driver.ReadAsync(["DL205_V40400"], TestContext.Current.CancellationToken);
+        results[0].StatusCode.ShouldBe(0u);
+        results[0].Value.ShouldBe((ushort)0x4040, "dl205.json seeds HR[0x2100] with marker 0x4040 (= V40400 value)");
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/DL205/DL205XInputTests.cs

@@ -0,0 +1,71 @@
+using Shouldly;
+using Xunit;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests.DL205;
+
+/// <summary>
+///     Verifies the DL260 X-input discrete-input mapping against the <c>dl205.json</c>
+///     pymodbus profile. X-inputs are FC02 discrete-input-only (Modbus doesn't allow writes
+///     to discrete inputs), and the DirectLOGIC convention is X0 → DI 0 with octal offsets
+///     for subsequent addresses. The sim seeds X20 octal (= DI 16) = ON so the test can
+///     prove the helper routes through to the right cell.
+/// </summary>
+/// <remarks>
+///     X0 / X1 / …X17 octal all share cell 0 (DI 0-15 → cell 0 bits 0-15) which conflicts
+///     with the V0 uint16 marker; we can't seed both types at cell 0 under shared-blocks
+///     semantics. So the test uses X20 octal (first address beyond the cell-0 boundary) which
+///     lands cleanly at cell 1 bit 0 and leaves the V0 register-zero quirk intact.
+/// </remarks>
+[Collection(ModbusSimulatorCollection.Name)]
+[Trait("Category", "Integration")]
+[Trait("Device", "DL205")]
+public sealed class DL205XInputTests(ModbusSimulatorFixture sim)
+{
+    [Fact]
+    public async Task DL260_X20_octal_maps_to_DiscreteInput_16_and_reads_ON()
+    {
+        if (sim.SkipReason is not null) Assert.Skip(sim.SkipReason);
+        if (!string.Equals(Environment.GetEnvironmentVariable("MODBUS_SIM_PROFILE"), "dl205",
+                StringComparison.OrdinalIgnoreCase))
+        {
+            Assert.Skip("MODBUS_SIM_PROFILE != dl205 — skipping.");
+        }
+
+        // X20 octal = decimal 16 = DI 16 per the DL260 convention (X-inputs start at DI 0).
+        var di = DirectLogicAddress.XInputToDiscrete("X20");
+        di.ShouldBe((ushort)16);
+
+        var options = BuildOptions(sim, [
+            new ModbusTagDefinition("DL260_X20",
+                ModbusRegion.DiscreteInputs, Address: di,
+                DataType: ModbusDataType.Bool, Writable: false),
+            // Unpopulated-X control: pymodbus returns 0 (not exception) for any bit in the
+            // configured DI range that wasn't explicitly seeded — per docs/v2/dl205.md
+            // "Reading a non-populated X input ... returns zero, not an exception".
+            new ModbusTagDefinition("DL260_X21_off",
+                ModbusRegion.DiscreteInputs, Address: DirectLogicAddress.XInputToDiscrete("X21"),
+                DataType: ModbusDataType.Bool, Writable: false),
+        ]);
+        await using var driver = new ModbusDriver(options, driverInstanceId: "dl205-xinput");
+        await driver.InitializeAsync("{}", TestContext.Current.CancellationToken);
+
+        var results = await driver.ReadAsync(["DL260_X20", "DL260_X21_off"], TestContext.Current.CancellationToken);
+
+        results[0].StatusCode.ShouldBe(0u);
+        results[0].Value.ShouldBe(true, "dl205.json seeds cell 1 bit 0 (X20 octal = DI 16) = ON");
+
+        results[1].StatusCode.ShouldBe(0u, "unpopulated X inputs must read cleanly — DL260 does NOT raise an exception");
+        results[1].Value.ShouldBe(false);
+    }
+
+    private static ModbusDriverOptions BuildOptions(ModbusSimulatorFixture sim, IReadOnlyList<ModbusTagDefinition> tags)
+        => new()
+        {
+            Host = sim.Host,
+            Port = sim.Port,
+            UnitId = 1,
+            Timeout = TimeSpan.FromSeconds(2),
+            Tags = tags,
+            Probe = new ModbusProbeOptions { Enabled = false },
+        };
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/ModbusSimulatorFixture.cs

@@ -0,0 +1,83 @@
+using System.Net.Sockets;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests;
+
+/// <summary>
+///     Reachability probe for a Modbus TCP simulator (pymodbus-driven, see
+///     <c>Pymodbus/serve.ps1</c>) or a real PLC. Parses
+///     <c>MODBUS_SIM_ENDPOINT</c> (default <c>localhost:5020</c> per PR 43) and TCP-connects once at
+///     fixture construction. Each test checks <see cref="SkipReason"/> and calls
+///     <c>Assert.Skip</c> when the endpoint was unreachable, so a dev box without a running
+///     simulator still passes `dotnet test` cleanly — matches the Galaxy live-smoke pattern in
+///     <c>GalaxyRepositoryLiveSmokeTests</c>.
+/// </summary>
+/// <remarks>
+///     <para>
+///         Do NOT keep the probe socket open for the life of the fixture. The probe is a
+///         one-shot liveness check; tests open their own transports (the real
+///         <see cref="ModbusTcpTransport"/>) against the same endpoint. Sharing a socket
+///         across tests would serialize them on a single TCP stream.
+///     </para>
+///     <para>
+///         The fixture is a collection fixture so the reachability probe runs once per test
+///         session, not per test — checking every test would waste several seconds against a
+///         firewalled endpoint that times out each attempt.
+///     </para>
+/// </remarks>
+public sealed class ModbusSimulatorFixture : IAsyncDisposable
+{
+    // PR 43: default port is 5020 (pymodbus convention) instead of 502 (Modbus standard).
+    // Picking 5020 sidesteps the privileged-port admin requirement on Windows + matches the
+    // port baked into the pymodbus simulator JSON profiles in Pymodbus/. Override with
+    // MODBUS_SIM_ENDPOINT to point at a real PLC on its native port 502.
+    private const string DefaultEndpoint = "localhost:5020";
+    private const string EndpointEnvVar = "MODBUS_SIM_ENDPOINT";
+
+    public string Host { get; }
+    public int Port { get; }
+    public string? SkipReason { get; }
+
+    public ModbusSimulatorFixture()
+    {
+        var raw = Environment.GetEnvironmentVariable(EndpointEnvVar) ?? DefaultEndpoint;
+        var parts = raw.Split(':', 2);
+        Host = parts[0];
+        Port = parts.Length == 2 && int.TryParse(parts[1], out var p) ? p : 502;
+
+        try
+        {
+            // Force IPv4 family on the probe — pymodbus's TCP server binds 0.0.0.0 (IPv4 only)
+            // while .NET's TcpClient default-resolves "localhost" → IPv6 ::1 first, fails to
+            // connect, and only then tries IPv4. Under .NET 10 the IPv6 fail surfaces as a
+            // 2s timeout (no graceful fallback by default), so the C# probe times out even
+            // though a PowerShell probe of the same endpoint succeeds. Resolving + dialing
+            // explicit IPv4 sidesteps the dual-stack ordering.
+            using var client = new TcpClient(System.Net.Sockets.AddressFamily.InterNetwork);
+            var task = client.ConnectAsync(
+                System.Net.Dns.GetHostAddresses(Host)
+                    .FirstOrDefault(a => a.AddressFamily == System.Net.Sockets.AddressFamily.InterNetwork)
+                    ?? System.Net.IPAddress.Loopback,
+                Port);
+            if (!task.Wait(TimeSpan.FromSeconds(2)) || !client.Connected)
+            {
+                SkipReason = $"Modbus simulator at {Host}:{Port} did not accept a TCP connection within 2s. " +
+                             $"Start the pymodbus simulator (Pymodbus\\serve.ps1 -Profile standard) " +
+                             $"or override {EndpointEnvVar}, then re-run.";
+            }
+        }
+        catch (Exception ex)
+        {
+            SkipReason = $"Modbus simulator at {Host}:{Port} unreachable: {ex.GetType().Name}: {ex.Message}. " +
+                         $"Start the pymodbus simulator (Pymodbus\\serve.ps1 -Profile standard) " +
+                             $"or override {EndpointEnvVar}, then re-run.";
+        }
+    }
+
+    public ValueTask DisposeAsync() => ValueTask.CompletedTask;
+}
+
+[Xunit.CollectionDefinition(Name)]
+public sealed class ModbusSimulatorCollection : Xunit.ICollectionFixture<ModbusSimulatorFixture>
+{
+    public const string Name = "ModbusSimulator";
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/Pymodbus/README.md

@@ -0,0 +1,163 @@
+# pymodbus simulator profiles
+
+Two JSON-config profiles for pymodbus's `ModbusSimulatorServer`. Replaces the
+ModbusPal `.xmpp` profiles that lived here in PR 42 — pymodbus is headless,
+maintained, semantic about register layout, and pip-installable on Windows.
+
+| File | What it simulates | Test category |
+|---|---|---|
+| [`standard.json`](standard.json) | Generic Modbus TCP server — HR[0..31] = address-as-value, HR[100] declarative auto-increment via `"action": "increment"`, alternating coils, scratch ranges for write tests. | `Trait=Standard` |
+| [`dl205.json`](dl205.json) | AutomationDirect DirectLOGIC DL205 / DL260 quirks per [`docs/v2/dl205.md`](../../../docs/v2/dl205.md): low-byte-first string packing, CDAB Float32, BCD numerics, V-memory address markers, Y/C coil mappings. Inline `_quirk` comments per register name the behavior. | `Trait=DL205` |
+
+Both bind TCP **5020** (pymodbus convention; sidesteps the Windows admin
+requirement for privileged port 502). The integration-test fixture
+(`ModbusSimulatorFixture`) defaults to `localhost:5020` to match — override
+via `MODBUS_SIM_ENDPOINT` to point at a real PLC on its native port 502.
+
+Run only **one profile at a time** (they share TCP 5020).
+
+## Install
+
+```powershell
+pip install "pymodbus[simulator]==3.13.0"
+```
+
+The `[simulator]` extra pulls in `aiohttp` for the optional web UI / REST API.
+Pinned to 3.13.0 for reproducibility — avoid 4.x dev releases until stabilized.
+Requires Python ≥ 3.10. Windows Firewall will prompt on first bind; allow
+Private network.
+
+## Run
+
+Foreground (Ctrl+C to stop). Use the `serve.ps1` wrapper:
+
+```powershell
+.\serve.ps1 -Profile standard
+.\serve.ps1 -Profile dl205
+```
+
+Or invoke pymodbus directly:
+
+```powershell
+pymodbus.simulator `
+    --modbus_server srv `
+    --modbus_device dev `
+    --json_file .\standard.json `
+    --http_port 8080
+```
+
+Web UI at `http://localhost:8080` lets you inspect + poke registers manually.
+Pass `--no_http` (or `-HttpPort 0` to `serve.ps1`) to disable.
+
+## Run the integration tests
+
+In a separate shell, with the simulator running:
+
+```powershell
+cd C:\Users\dohertj2\Desktop\lmxopcua
+dotnet test tests\ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests
+```
+
+Tests auto-skip with a clear `SkipReason` if `localhost:5020` isn't reachable
+within 2 seconds. Filter by trait when both profiles' tests coexist:
+
+```powershell
+dotnet test ... --filter "Trait=Standard"
+dotnet test ... --filter "Trait=DL205"
+```
+
+## What's encoded in each profile
+
+### standard.json
+
+- HR[0..31]: each register's value equals its address. Easy mental map.
+- HR[100]: `"action": "increment"` ticks 0..65535 on every register access — drives subscribe-and-receive tests so they have a register that changes without a write.
+- HR[200..209]: scratch range for write-roundtrip tests.
+- Coils[0..31]: alternating on/off (even=on).
+- Coils[100..109]: scratch.
+- All addresses 0..1023 are writable (`"write": [[0, 1023]]`).
+
+### dl205.json (per `docs/v2/dl205.md`)
+
+| HR address | Quirk demonstrated | Raw value | Decoded |
+|---|---|---|---|
+| `0` (V0) | Register 0 is valid (rejects-register-0 rumour disproved) | `51966` (0xCAFE) | marker |
+| `1024` (V2000 octal) | V-memory octal-to-decimal mapping | `8192` (0x2000) | marker |
+| `8448` (V40400 octal) | V40400 → PDU 0x2100 (NOT register 0) | `16448` (0x4040) | marker |
+| `1040..1042` | String "Hello" packed first-char-low-byte | `25928, 27756, 111` | `"Hello"` |
+| `1056..1057` | Float32 1.5f in CDAB word order | `0, 16320` | `1.5f` |
+| `1072` | Decimal 1234 in BCD encoding | `4660` (0x1234) | `1234` |
+| `1280..1407` | 128-register block (FC03 cap = 128 above spec's 125) | first/last/mid markers; rest defaults to 0 | for FC03 cap test |
+
+| Coil address | Quirk demonstrated |
+|---|---|
+| `2048` | Y0 maps to coil 2048 (DL260 layout) |
+| `3072` | C0 maps to coil 3072 (DL260 layout) |
+| `4000..4007` | Scratch C-relay range for write-roundtrip tests |
+
+The DL260 X-input markers (FC02 discrete inputs) **are not encoded separately**
+because the profile uses `shared blocks: true` (matches DL series memory
+model) — coils/DI/HR/IR overlay the same word address space. Tests that
+target FC02 against this profile end up reading the same bit positions as
+the coils they share with.
+
+## What's IN pymodbus that wasn't in ModbusPal
+
+- **All four standard tables** (HR, IR, coils, DI) configurable via `co size` / `di size` / `hr size` / `ir size` setup keys.
+- **Per-register raw uint16 seeding** — `{"addr": 1040, "value": 25928}` puts exactly that 16-bit value on the wire. No interpretation.
+- **Built-in actions**: `increment`, `random`, `timestamp`, `reset`, `uptime` for declarative dynamic registers. No Python script alongside the config required.
+- **Custom actions** — point `--custom_actions_module` at a `.py` file exposing callables to express anything more complex (per-second wall-clock ticks, BCD synthesis, etc.).
+- **Headless** — pure CLI process, no Java, no Swing. Pip-installable. Plays well with CI runners.
+- **Web UI / REST API** — `--http_port 8080` adds an aiohttp server for live inspection. Optional.
+- **Maintained** — current stable 3.13.0 (April 2026), active development on 4.0 dev branch.
+
+## Trade-offs vs the hand-authored ModbusPal profiles
+
+- pymodbus's built-in `float32` type stores in pymodbus's word order; for explicit DL205 CDAB control we seed two raw `uint16` entries instead. Documented inline in `dl205.json`.
+- `increment` action ticks per-access, not wall-clock. A 250ms-poll integration test sees variation either way; for strict 1Hz cadence add `--custom_actions_module my_actions.py` with a `time.time()`-based callable.
+- `dl205.json` uses `shared blocks: true` because it matches DL series memory model; `standard.json` uses `shared blocks: false` so coils and HR address spaces are independent (more like a textbook PLC).
+
+## File format reference
+
+```json
+{
+  "server_list": {
+    "<server-name>": {
+      "comm": "tcp",
+      "host": "0.0.0.0",
+      "port": 5020,
+      "framer": "socket",
+      "device_id": 1
+    }
+  },
+  "device_list": {
+    "<device-name>": {
+      "setup": {
+        "co size": N, "di size": N, "hr size": N, "ir size": N,
+        "shared blocks": false,
+        "type exception": false,
+        "defaults": { "value": {...}, "action": {...} }
+      },
+      "invalid": [],
+      "write": [[<from>, <to>]],
+      "bits":    [{"addr": N, "value": 0|1}],
+      "uint16":  [{"addr": N, "value": <0..65535>, "action"?: "increment", "parameters"?: {...}}],
+      "uint32":  [{"addr": N, "value": <int>}],
+      "float32": [{"addr": N, "value": <float>}],
+      "string":  [{"addr": N, "value": "<text>"}],
+      "repeat":  []
+    }
+  }
+}
+```
+
+The CLI args `--modbus_server <server-name> --modbus_device <device-name>`
+pick which entries the simulator binds.
+
+## References
+
+- [pymodbus on PyPI](https://pypi.org/project/pymodbus/) — install, version pin
+- [Simulator config docs](https://pymodbus.readthedocs.io/en/dev/source/library/simulator/config.html) — full schema reference
+- [Simulator REST API](https://pymodbus.readthedocs.io/en/latest/source/library/simulator/restapi.html) — for the optional web UI
+- [`docs/v2/dl205.md`](../../../docs/v2/dl205.md) — what each DL205 profile entry simulates
+- [`docs/v2/modbus-test-plan.md`](../../../docs/v2/modbus-test-plan.md) — the `DL205_<behavior>` test naming convention

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/Pymodbus/dl205.json

@@ -0,0 +1,111 @@
+{
+  "_comment": "DL205.json — DirectLOGIC DL205/DL260 quirk simulator. Models docs/v2/dl205.md as concrete register values. NOTE: pymodbus rejects unknown keys at device-list / setup level; explanatory comments live at top-level _comment + in README + git. Inline _quirk keys WITHIN individual register entries are accepted by pymodbus 3.13.0 (it only validates addr / value / action / parameters per entry). Each quirky uint16 is a pre-computed raw 16-bit value; pymodbus serves it verbatim. shared blocks=true matches DL series memory model. write list mirrors each seeded block — pymodbus rejects sweeping write ranges that include undefined cells.",
+
+  "server_list": {
+    "srv": {
+      "comm": "tcp",
+      "host": "0.0.0.0",
+      "port": 5020,
+      "framer": "socket",
+      "device_id": 1
+    }
+  },
+
+  "device_list": {
+    "dev": {
+      "setup": {
+        "co size":    16384,
+        "di size":     8192,
+        "hr size":    16384,
+        "ir size":     1024,
+        "shared blocks": true,
+        "type exception": false,
+        "defaults": {
+          "value":  {"bits": 0, "uint16": 0, "uint32": 0, "float32": 0.0, "string": " "},
+          "action": {"bits": null, "uint16": null, "uint32": null, "float32": null, "string": null}
+        }
+      },
+      "invalid": [],
+      "write": [
+        [0, 0],
+        [200, 209],
+        [1024, 1024],
+        [1040, 1042],
+        [1056, 1057],
+        [1072, 1072],
+        [1280, 1282],
+        [1343, 1343],
+        [1407, 1407],
+        [1, 1],
+        [128, 128],
+        [192, 192],
+        [250, 250],
+        [8448, 8448]
+      ],
+
+      "uint16": [
+        {"_quirk": "V0 marker. HR[0]=0xCAFE proves register 0 is valid on DL205/DL260 (rejects-register-0 was a DL05/DL06 relative-mode artefact). 0xCAFE = 51966.",
+         "addr": 0,    "value": 51966},
+
+        {"_quirk": "Scratch HR range 200..209 — mirrors the standard.json scratch range so the smoke test (DL205Profile.SmokeHoldingRegister=200) round-trips identically against either profile.",
+         "addr": 200, "value": 0},
+        {"addr": 201, "value": 0},
+        {"addr": 202, "value": 0},
+        {"addr": 203, "value": 0},
+        {"addr": 204, "value": 0},
+        {"addr": 205, "value": 0},
+        {"addr": 206, "value": 0},
+        {"addr": 207, "value": 0},
+        {"addr": 208, "value": 0},
+        {"addr": 209, "value": 0},
+
+        {"_quirk": "V2000 marker. V2000 octal = decimal 1024 = PDU 0x0400. Marker 0x2000 = 8192.",
+         "addr": 1024, "value": 8192},
+
+        {"_quirk": "V40400 marker. V40400 octal = decimal 8448 = PDU 0x2100 (NOT register 0). Marker 0x4040 = 16448.",
+         "addr": 8448, "value": 16448},
+
+        {"_quirk": "String 'Hello' first char in LOW byte. HR[0x410] = 'H'(0x48) lo + 'e'(0x65) hi = 0x6548 = 25928.",
+         "addr": 1040, "value": 25928},
+        {"_quirk": "String 'Hello' second char-pair: 'l'(0x6C) lo + 'l'(0x6C) hi = 0x6C6C = 27756.",
+         "addr": 1041, "value": 27756},
+        {"_quirk": "String 'Hello' third char-pair: 'o'(0x6F) lo + null(0x00) hi = 0x006F = 111.",
+         "addr": 1042, "value": 111},
+
+        {"_quirk": "Float32 1.5f in CDAB word order. IEEE 754 1.5 = 0x3FC00000. CDAB = low word first: HR[0x420]=0x0000, HR[0x421]=0x3FC0=16320.",
+         "addr": 1056, "value": 0},
+        {"_quirk": "Float32 1.5f CDAB high word.",
+         "addr": 1057, "value": 16320},
+
+        {"_quirk": "BCD register. Decimal 1234 stored as BCD nibbles 0x1234 = 4660. NOT binary 1234 (= 0x04D2).",
+         "addr": 1072, "value": 4660},
+
+        {"_quirk": "FC03 cap test marker — first cell of a 128-register span the FC03 cap test reads. Other cells in the span aren't seeded explicitly, so reads of HR[1283..1342] / 1344..1406 return the default 0; the seeded markers at 1280, 1281, 1282, 1343, 1407 prove the span boundaries.",
+         "addr": 1280, "value": 0},
+        {"addr": 1281, "value": 1},
+        {"addr": 1282, "value": 2},
+        {"addr": 1343, "value": 63},
+        {"addr": 1407, "value": 127}
+      ],
+
+      "bits": [
+        {"_quirk": "X-input bank marker cell. X0 -> DI 0 conflicts with uint16 V0 at cell 0, so this marker covers X20 octal (= decimal 16 = DI 16 = cell 1 bit 0). X20=ON, X23 octal (DI 19 = cell 1 bit 3)=ON -> cell 1 value = 0b00001001 = 9.",
+         "addr": 1, "value": 9},
+
+        {"_quirk": "Y-output bank marker cell. pymodbus's simulator maps Modbus FC01/02/05 bit-addresses to cell index = bit_addr / 16; so Modbus coil 2048 lives at cell 128 bit 0. Y0=ON (bit 0), Y1=OFF (bit 1), Y2=ON (bit 2) -> value=0b00000101=5 proves DL260 mapping Y0 -> coil 2048.",
+         "addr": 128, "value": 5},
+
+        {"_quirk": "C-relay bank marker cell. Modbus coil 3072 -> cell 192 bit 0. C0=ON (bit 0), C1=OFF (bit 1), C2=ON (bit 2) -> value=5 proves DL260 mapping C0 -> coil 3072.",
+         "addr": 192, "value": 5},
+
+        {"_quirk": "Scratch cell for coil 4000..4015 write round-trip tests. Cell 250 holds Modbus coils 4000-4015; all bits start at 0 and tests set specific bits via FC05.",
+         "addr": 250, "value": 0}
+      ],
+
+      "uint32":  [],
+      "float32": [],
+      "string":  [],
+      "repeat":  []
+    }
+  }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/Pymodbus/serve.ps1

@@ -0,0 +1,60 @@
+<#
+.SYNOPSIS
+    Launches the pymodbus simulator with one of the integration-test profiles
+    (Standard or DL205). Foreground process — Ctrl+C to stop.
+
+.PARAMETER Profile
+    Which simulator profile to run: 'standard' or 'dl205'. Both bind TCP 5020 by
+    default so they can't run simultaneously on the same box.
+
+.PARAMETER HttpPort
+    Port for pymodbus's optional web UI / REST API. Default 8080. Pass 0 to
+    disable (passes --no_http).
+
+.EXAMPLE
+    .\serve.ps1 -Profile standard
+    Starts the standard server on TCP 5020 with web UI on 8080.
+
+.EXAMPLE
+    .\serve.ps1 -Profile dl205 -HttpPort 0
+    Starts the DL205 server on TCP 5020, no web UI.
+#>
+[CmdletBinding()]
+param(
+    [Parameter(Mandatory)] [ValidateSet('standard', 'dl205')] [string]$Profile,
+    [int]$HttpPort = 8080
+)
+
+$ErrorActionPreference = 'Stop'
+$here = $PSScriptRoot
+
+# Confirm pymodbus.simulator is on PATH — clearer message than the
+# 'CommandNotFoundException' dotnet style.
+$cmd = Get-Command pymodbus.simulator -ErrorAction SilentlyContinue
+if (-not $cmd) {
+    Write-Error "pymodbus.simulator not found. Install with: pip install 'pymodbus[simulator]==3.13.0'"
+    exit 1
+}
+
+$jsonFile = Join-Path $here "$Profile.json"
+if (-not (Test-Path $jsonFile)) {
+    Write-Error "Profile config not found: $jsonFile"
+    exit 1
+}
+
+$args = @(
+    '--modbus_server', 'srv',
+    '--modbus_device', 'dev',
+    '--json_file',     $jsonFile
+)
+
+if ($HttpPort -gt 0) {
+    $args += @('--http_port', $HttpPort)
+    Write-Host "Web UI will be at http://localhost:$HttpPort"
+} else {
+    $args += '--no_http'
+}
+
+Write-Host "Starting pymodbus simulator: profile=$Profile  TCP=localhost:5020"
+Write-Host "Ctrl+C to stop."
+& pymodbus.simulator @args

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/Pymodbus/standard.json

@@ -0,0 +1,97 @@
+{
+  "_comment": "Standard.json — generic Modbus TCP server for the integration suite. See ../README.md. NOTE: pymodbus rejects unknown keys at device-list / setup level; explanatory comments live in the README + git history. Layout: HR[0..31]=address-as-value, HR[100]=auto-increment, HR[200..209]=scratch, coils 1024..1055=alternating, coils 1100..1109=scratch. Coils live at 1024+ because pymodbus stores all 4 standard tables in ONE underlying cell array — bits and uint16 at the same address conflict (each cell can only be typed once).",
+
+  "server_list": {
+    "srv": {
+      "comm": "tcp",
+      "host": "0.0.0.0",
+      "port": 5020,
+      "framer": "socket",
+      "device_id": 1
+    }
+  },
+
+  "device_list": {
+    "dev": {
+      "setup": {
+        "co size": 2048,
+        "di size": 2048,
+        "hr size": 2048,
+        "ir size": 2048,
+        "shared blocks": true,
+        "type exception": false,
+        "defaults": {
+          "value":  {"bits": 0, "uint16": 0, "uint32": 0, "float32": 0.0, "string": " "},
+          "action": {"bits": null, "uint16": null, "uint32": null, "float32": null, "string": null}
+        }
+      },
+      "invalid": [],
+      "write": [
+        [0, 31],
+        [100, 100],
+        [200, 209],
+        [1024, 1055],
+        [1100, 1109]
+      ],
+
+      "uint16": [
+        {"addr":  0, "value":  0}, {"addr":  1, "value":  1},
+        {"addr":  2, "value":  2}, {"addr":  3, "value":  3},
+        {"addr":  4, "value":  4}, {"addr":  5, "value":  5},
+        {"addr":  6, "value":  6}, {"addr":  7, "value":  7},
+        {"addr":  8, "value":  8}, {"addr":  9, "value":  9},
+        {"addr": 10, "value": 10}, {"addr": 11, "value": 11},
+        {"addr": 12, "value": 12}, {"addr": 13, "value": 13},
+        {"addr": 14, "value": 14}, {"addr": 15, "value": 15},
+        {"addr": 16, "value": 16}, {"addr": 17, "value": 17},
+        {"addr": 18, "value": 18}, {"addr": 19, "value": 19},
+        {"addr": 20, "value": 20}, {"addr": 21, "value": 21},
+        {"addr": 22, "value": 22}, {"addr": 23, "value": 23},
+        {"addr": 24, "value": 24}, {"addr": 25, "value": 25},
+        {"addr": 26, "value": 26}, {"addr": 27, "value": 27},
+        {"addr": 28, "value": 28}, {"addr": 29, "value": 29},
+        {"addr": 30, "value": 30}, {"addr": 31, "value": 31},
+
+        {"addr": 100, "value": 0,
+         "action": "increment",
+         "parameters": {"minval": 0, "maxval": 65535}},
+
+        {"addr": 200, "value": 0}, {"addr": 201, "value": 0},
+        {"addr": 202, "value": 0}, {"addr": 203, "value": 0},
+        {"addr": 204, "value": 0}, {"addr": 205, "value": 0},
+        {"addr": 206, "value": 0}, {"addr": 207, "value": 0},
+        {"addr": 208, "value": 0}, {"addr": 209, "value": 0}
+      ],
+
+      "bits": [
+        {"addr": 1024, "value": 1}, {"addr": 1025, "value": 0},
+        {"addr": 1026, "value": 1}, {"addr": 1027, "value": 0},
+        {"addr": 1028, "value": 1}, {"addr": 1029, "value": 0},
+        {"addr": 1030, "value": 1}, {"addr": 1031, "value": 0},
+        {"addr": 1032, "value": 1}, {"addr": 1033, "value": 0},
+        {"addr": 1034, "value": 1}, {"addr": 1035, "value": 0},
+        {"addr": 1036, "value": 1}, {"addr": 1037, "value": 0},
+        {"addr": 1038, "value": 1}, {"addr": 1039, "value": 0},
+        {"addr": 1040, "value": 1}, {"addr": 1041, "value": 0},
+        {"addr": 1042, "value": 1}, {"addr": 1043, "value": 0},
+        {"addr": 1044, "value": 1}, {"addr": 1045, "value": 0},
+        {"addr": 1046, "value": 1}, {"addr": 1047, "value": 0},
+        {"addr": 1048, "value": 1}, {"addr": 1049, "value": 0},
+        {"addr": 1050, "value": 1}, {"addr": 1051, "value": 0},
+        {"addr": 1052, "value": 1}, {"addr": 1053, "value": 0},
+        {"addr": 1054, "value": 1}, {"addr": 1055, "value": 0},
+
+        {"addr": 1100, "value": 0}, {"addr": 1101, "value": 0},
+        {"addr": 1102, "value": 0}, {"addr": 1103, "value": 0},
+        {"addr": 1104, "value": 0}, {"addr": 1105, "value": 0},
+        {"addr": 1106, "value": 0}, {"addr": 1107, "value": 0},
+        {"addr": 1108, "value": 0}, {"addr": 1109, "value": 0}
+      ],
+
+      "uint32":  [],
+      "float32": [],
+      "string":  [],
+      "repeat":  []
+    }
+  }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests.csproj

@@ -0,0 +1,36 @@
+<Project Sdk="Microsoft.NET.Sdk">
+
+    <PropertyGroup>
+        <TargetFramework>net10.0</TargetFramework>
+        <Nullable>enable</Nullable>
+        <ImplicitUsings>enable</ImplicitUsings>
+        <IsPackable>false</IsPackable>
+        <IsTestProject>true</IsTestProject>
+        <RootNamespace>ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests</RootNamespace>
+    </PropertyGroup>
+
+    <ItemGroup>
+        <PackageReference Include="xunit.v3" Version="1.1.0"/>
+        <PackageReference Include="Shouldly" Version="4.3.0"/>
+        <PackageReference Include="Microsoft.NET.Test.Sdk" Version="17.12.0"/>
+        <PackageReference Include="xunit.runner.visualstudio" Version="3.0.2">
+            <PrivateAssets>all</PrivateAssets>
+            <IncludeAssets>runtime; build; native; contentfiles; analyzers; buildtransitive</IncludeAssets>
+        </PackageReference>
+    </ItemGroup>
+
+    <ItemGroup>
+        <ProjectReference Include="..\..\src\ZB.MOM.WW.OtOpcUa.Driver.Modbus\ZB.MOM.WW.OtOpcUa.Driver.Modbus.csproj"/>
+    </ItemGroup>
+
+    <ItemGroup>
+        <None Update="Pymodbus\**\*" CopyToOutputDirectory="PreserveNewest"/>
+        <None Update="DL205\**\*" CopyToOutputDirectory="PreserveNewest"/>
+    </ItemGroup>
+
+    <ItemGroup>
+        <NuGetAuditSuppress Include="https://github.com/advisories/GHSA-37gx-xxp4-5rgx"/>
+        <NuGetAuditSuppress Include="https://github.com/advisories/GHSA-w3x6-4m5h-cxqf"/>
+    </ItemGroup>
+
+</Project>

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.Tests/DirectLogicAddressTests.cs

@@ -0,0 +1,139 @@
+using Shouldly;
+using Xunit;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Modbus.Tests;
+
+[Trait("Category", "Unit")]
+public sealed class DirectLogicAddressTests
+{
+    [Theory]
+    [InlineData("V0", (ushort)0x0000)]
+    [InlineData("V1", (ushort)0x0001)]
+    [InlineData("V7", (ushort)0x0007)]
+    [InlineData("V10", (ushort)0x0008)]
+    [InlineData("V2000", (ushort)0x0400)]  // canonical DL205/DL260 user-memory start
+    [InlineData("V7777", (ushort)0x0FFF)]
+    [InlineData("V10000", (ushort)0x1000)]
+    [InlineData("V17777", (ushort)0x1FFF)]
+    public void UserVMemoryToPdu_converts_octal_V_prefix(string v, ushort expected)
+        => DirectLogicAddress.UserVMemoryToPdu(v).ShouldBe(expected);
+
+    [Theory]
+    [InlineData("0", (ushort)0)]
+    [InlineData("2000", (ushort)0x0400)]
+    [InlineData("v2000", (ushort)0x0400)]   // lowercase v
+    [InlineData(" V2000 ", (ushort)0x0400)] // surrounding whitespace
+    public void UserVMemoryToPdu_accepts_bare_or_prefixed_or_padded(string v, ushort expected)
+        => DirectLogicAddress.UserVMemoryToPdu(v).ShouldBe(expected);
+
+    [Theory]
+    [InlineData("V8")]     // 8 is not a valid octal digit
+    [InlineData("V19")]
+    [InlineData("V2009")]
+    public void UserVMemoryToPdu_rejects_non_octal_digits(string v)
+    {
+        Should.Throw<ArgumentException>(() => DirectLogicAddress.UserVMemoryToPdu(v))
+            .Message.ShouldContain("octal");
+    }
+
+    [Theory]
+    [InlineData(null)]
+    [InlineData("")]
+    [InlineData("   ")]
+    [InlineData("V")]
+    public void UserVMemoryToPdu_rejects_empty_input(string? v)
+        => Should.Throw<ArgumentException>(() => DirectLogicAddress.UserVMemoryToPdu(v!));
+
+    [Fact]
+    public void UserVMemoryToPdu_overflow_rejected()
+    {
+        // 200000 octal = 0x10000 — one past ushort range.
+        Should.Throw<OverflowException>(() => DirectLogicAddress.UserVMemoryToPdu("V200000"));
+    }
+
+    [Fact]
+    public void SystemVMemoryBasePdu_is_0x2100_for_V40400()
+    {
+        // V40400 on DL260 / H2-ECOM100 absolute mode → PDU 0x2100 (decimal 8448), NOT 0x4100
+        // which a naive octal-to-decimal of 40400 octal would give (= 16640).
+        DirectLogicAddress.SystemVMemoryBasePdu.ShouldBe((ushort)0x2100);
+        DirectLogicAddress.SystemVMemoryToPdu(0).ShouldBe((ushort)0x2100);
+    }
+
+    [Fact]
+    public void SystemVMemoryToPdu_offsets_within_bank()
+    {
+        DirectLogicAddress.SystemVMemoryToPdu(1).ShouldBe((ushort)0x2101);
+        DirectLogicAddress.SystemVMemoryToPdu(0x100).ShouldBe((ushort)0x2200);
+    }
+
+    [Fact]
+    public void SystemVMemoryToPdu_rejects_overflow()
+    {
+        // ushort wrap: 0xFFFF - 0x2100 = 0xDEFF; anything above should throw.
+        Should.NotThrow(() => DirectLogicAddress.SystemVMemoryToPdu(0xDEFF));
+        Should.Throw<OverflowException>(() => DirectLogicAddress.SystemVMemoryToPdu(0xDF00));
+    }
+
+    // --- Bit memory: Y-output, C-relay, X-input, SP-special ---
+
+    [Theory]
+    [InlineData("Y0", (ushort)2048)]
+    [InlineData("Y1", (ushort)2049)]
+    [InlineData("Y7", (ushort)2055)]
+    [InlineData("Y10", (ushort)2056)]    // octal 10 = decimal 8
+    [InlineData("Y17", (ushort)2063)]    // octal 17 = decimal 15
+    [InlineData("Y777", (ushort)2559)]   // top of DL260 Y range per doc table
+    public void YOutputToCoil_adds_octal_offset_to_2048(string y, ushort expected)
+        => DirectLogicAddress.YOutputToCoil(y).ShouldBe(expected);
+
+    [Theory]
+    [InlineData("C0", (ushort)3072)]
+    [InlineData("C1", (ushort)3073)]
+    [InlineData("C10", (ushort)3080)]
+    [InlineData("C1777", (ushort)4095)]  // top of DL260 C range
+    public void CRelayToCoil_adds_octal_offset_to_3072(string c, ushort expected)
+        => DirectLogicAddress.CRelayToCoil(c).ShouldBe(expected);
+
+    [Theory]
+    [InlineData("X0", (ushort)0)]
+    [InlineData("X17", (ushort)15)]
+    [InlineData("X777", (ushort)511)]    // top of DL260 X range
+    public void XInputToDiscrete_adds_octal_offset_to_0(string x, ushort expected)
+        => DirectLogicAddress.XInputToDiscrete(x).ShouldBe(expected);
+
+    [Theory]
+    [InlineData("SP0", (ushort)1024)]
+    [InlineData("SP7", (ushort)1031)]
+    [InlineData("sp0", (ushort)1024)]     // lowercase prefix
+    [InlineData("SP777", (ushort)1535)]
+    public void SpecialToDiscrete_adds_octal_offset_to_1024(string sp, ushort expected)
+        => DirectLogicAddress.SpecialToDiscrete(sp).ShouldBe(expected);
+
+    [Theory]
+    [InlineData("Y8")]
+    [InlineData("C9")]
+    [InlineData("X18")]
+    public void Bit_address_rejects_non_octal_digits(string bad)
+        => Should.Throw<ArgumentException>(() =>
+        {
+            if (bad[0] == 'Y') DirectLogicAddress.YOutputToCoil(bad);
+            else if (bad[0] == 'C') DirectLogicAddress.CRelayToCoil(bad);
+            else DirectLogicAddress.XInputToDiscrete(bad);
+        });
+
+    [Theory]
+    [InlineData("Y")]
+    [InlineData("C")]
+    [InlineData("")]
+    public void Bit_address_rejects_empty(string bad)
+        => Should.Throw<ArgumentException>(() => DirectLogicAddress.YOutputToCoil(bad));
+
+    [Fact]
+    public void YOutputToCoil_accepts_lowercase_prefix()
+        => DirectLogicAddress.YOutputToCoil("y0").ShouldBe((ushort)2048);
+
+    [Fact]
+    public void CRelayToCoil_accepts_bare_octal_without_C_prefix()
+        => DirectLogicAddress.CRelayToCoil("0").ShouldBe((ushort)3072);
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.Tests/ModbusCapTests.cs

@@ -0,0 +1,165 @@
+using Shouldly;
+using Xunit;
+using ZB.MOM.WW.OtOpcUa.Core.Abstractions;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.Modbus.Tests;
+
+[Trait("Category", "Unit")]
+public sealed class ModbusCapTests
+{
+    /// <summary>
+    ///     Records every PDU sent so tests can assert request-count and per-request quantity —
+    ///     the only observable behaviour of the auto-chunking path.
+    /// </summary>
+    private sealed class RecordingTransport : IModbusTransport
+    {
+        public readonly ushort[] HoldingRegisters = new ushort[1024];
+        public readonly List<(ushort Address, ushort Quantity)> Fc03Requests = new();
+        public readonly List<(ushort Address, ushort Quantity)> Fc16Requests = new();
+
+        public Task ConnectAsync(CancellationToken ct) => Task.CompletedTask;
+
+        public Task<byte[]> SendAsync(byte unitId, byte[] pdu, CancellationToken ct)
+        {
+            var fc = pdu[0];
+            if (fc == 0x03)
+            {
+                var addr = (ushort)((pdu[1] << 8) | pdu[2]);
+                var qty = (ushort)((pdu[3] << 8) | pdu[4]);
+                Fc03Requests.Add((addr, qty));
+                var byteCount = (byte)(qty * 2);
+                var resp = new byte[2 + byteCount];
+                resp[0] = 0x03;
+                resp[1] = byteCount;
+                for (var i = 0; i < qty; i++)
+                {
+                    resp[2 + i * 2] = (byte)(HoldingRegisters[addr + i] >> 8);
+                    resp[3 + i * 2] = (byte)(HoldingRegisters[addr + i] & 0xFF);
+                }
+                return Task.FromResult(resp);
+            }
+            if (fc == 0x10)
+            {
+                var addr = (ushort)((pdu[1] << 8) | pdu[2]);
+                var qty = (ushort)((pdu[3] << 8) | pdu[4]);
+                Fc16Requests.Add((addr, qty));
+                for (var i = 0; i < qty; i++)
+                    HoldingRegisters[addr + i] = (ushort)((pdu[6 + i * 2] << 8) | pdu[7 + i * 2]);
+                return Task.FromResult(new byte[] { 0x10, pdu[1], pdu[2], pdu[3], pdu[4] });
+            }
+            return Task.FromException<byte[]>(new ModbusException(fc, 0x01, $"fc={fc} unsupported"));
+        }
+
+        public ValueTask DisposeAsync() => ValueTask.CompletedTask;
+    }
+
+    [Fact]
+    public async Task Read_within_cap_issues_single_FC03_request()
+    {
+        var tag = new ModbusTagDefinition("S", ModbusRegion.HoldingRegisters, 0, ModbusDataType.String,
+            StringLength: 40); // 20 regs — fits in default cap (125).
+        var transport = new RecordingTransport();
+        var opts = new ModbusDriverOptions { Host = "fake", Tags = [tag], Probe = new ModbusProbeOptions { Enabled = false } };
+        await using var drv = new ModbusDriver(opts, "modbus-1", _ => transport);
+        await drv.InitializeAsync("{}", TestContext.Current.CancellationToken);
+
+        _ = await drv.ReadAsync(["S"], TestContext.Current.CancellationToken);
+
+        transport.Fc03Requests.Count.ShouldBe(1);
+        transport.Fc03Requests[0].Quantity.ShouldBe((ushort)20);
+    }
+
+    [Fact]
+    public async Task Read_above_cap_splits_into_two_FC03_requests()
+    {
+        // 240-char string = 120 regs. Cap = 100 (a typical sub-spec device cap). Expect 100 + 20.
+        var tag = new ModbusTagDefinition("LongString", ModbusRegion.HoldingRegisters, 100, ModbusDataType.String,
+            StringLength: 240);
+        var transport = new RecordingTransport();
+        // Seed cells so the re-assembled payload is stable — confirms chunks are stitched in order.
+        for (ushort i = 100; i < 100 + 120; i++)
+            transport.HoldingRegisters[i] = (ushort)((('A' + (i - 100) % 26) << 8) | ('A' + (i - 100) % 26));
+
+        var opts = new ModbusDriverOptions
+        {
+            Host = "fake",
+            Tags = [tag],
+            MaxRegistersPerRead = 100,
+            Probe = new ModbusProbeOptions { Enabled = false },
+        };
+        await using var drv = new ModbusDriver(opts, "modbus-1", _ => transport);
+        await drv.InitializeAsync("{}", TestContext.Current.CancellationToken);
+
+        var results = await drv.ReadAsync(["LongString"], TestContext.Current.CancellationToken);
+        results[0].StatusCode.ShouldBe(0u);
+
+        transport.Fc03Requests.Count.ShouldBe(2, "120 regs / cap 100 → 2 requests");
+        transport.Fc03Requests[0].ShouldBe(((ushort)100, (ushort)100));
+        transport.Fc03Requests[1].ShouldBe(((ushort)200, (ushort)20));
+
+        // Payload continuity: re-assembled string starts where register 100 does and keeps going.
+        var s = (string)results[0].Value!;
+        s.Length.ShouldBeGreaterThan(0);
+        s[0].ShouldBe('A'); // register[100] high byte
+    }
+
+    [Fact]
+    public async Task Read_cap_honors_Mitsubishi_lower_cap_of_64()
+    {
+        // 200-char string = 100 regs. Mitsubishi Q cap = 64. Expect: 64, 36.
+        var tag = new ModbusTagDefinition("MitString", ModbusRegion.HoldingRegisters, 0, ModbusDataType.String,
+            StringLength: 200);
+        var transport = new RecordingTransport();
+        var opts = new ModbusDriverOptions { Host = "fake", Tags = [tag], MaxRegistersPerRead = 64, Probe = new ModbusProbeOptions { Enabled = false } };
+        await using var drv = new ModbusDriver(opts, "modbus-1", _ => transport);
+        await drv.InitializeAsync("{}", TestContext.Current.CancellationToken);
+
+        _ = await drv.ReadAsync(["MitString"], TestContext.Current.CancellationToken);
+
+        transport.Fc03Requests.Count.ShouldBe(2);
+        transport.Fc03Requests[0].Quantity.ShouldBe((ushort)64);
+        transport.Fc03Requests[1].Quantity.ShouldBe((ushort)36);
+    }
+
+    [Fact]
+    public async Task Write_exceeding_cap_throws_instead_of_splitting()
+    {
+        // Partial FC16 across two transactions is not atomic. Forcing an explicit exception so the
+        // caller knows their tag definition is incompatible with the device cap rather than silently
+        // writing half a string and crashing between chunks.
+        var tag = new ModbusTagDefinition("LongStringWrite", ModbusRegion.HoldingRegisters, 0, ModbusDataType.String,
+            StringLength: 220); // 110 regs.
+        var transport = new RecordingTransport();
+        var opts = new ModbusDriverOptions { Host = "fake", Tags = [tag], MaxRegistersPerWrite = 100, Probe = new ModbusProbeOptions { Enabled = false } };
+        await using var drv = new ModbusDriver(opts, "modbus-1", _ => transport);
+        await drv.InitializeAsync("{}", TestContext.Current.CancellationToken);
+
+        var results = await drv.WriteAsync(
+            [new WriteRequest("LongStringWrite", new string('A', 220))],
+            TestContext.Current.CancellationToken);
+
+        // Driver catches the internal exception and surfaces BadInternalError — the Fc16Requests
+        // list must still be empty because nothing was sent.
+        results[0].StatusCode.ShouldNotBe(0u);
+        transport.Fc16Requests.Count.ShouldBe(0);
+    }
+
+    [Fact]
+    public async Task Write_within_cap_proceeds_normally()
+    {
+        var tag = new ModbusTagDefinition("ShortStringWrite", ModbusRegion.HoldingRegisters, 0, ModbusDataType.String,
+            StringLength: 40); // 20 regs.
+        var transport = new RecordingTransport();
+        var opts = new ModbusDriverOptions { Host = "fake", Tags = [tag], MaxRegistersPerWrite = 100, Probe = new ModbusProbeOptions { Enabled = false } };
+        await using var drv = new ModbusDriver(opts, "modbus-1", _ => transport);
+        await drv.InitializeAsync("{}", TestContext.Current.CancellationToken);
+
+        var results = await drv.WriteAsync(
+            [new WriteRequest("ShortStringWrite", "HELLO")],
+            TestContext.Current.CancellationToken);
+
+        results[0].StatusCode.ShouldBe(0u);
+        transport.Fc16Requests.Count.ShouldBe(1);
+        transport.Fc16Requests[0].Quantity.ShouldBe((ushort)20);
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.Tests/ModbusDataTypeTests.cs

@@ -172,4 +172,144 @@ public sealed class ModbusDataTypeTests
         wire[1].ShouldBe((byte)'i');
         for (var i = 2; i < 8; i++) wire[i].ShouldBe((byte)0);
     }
+
+    // --- DL205 low-byte-first strings (AutomationDirect DirectLOGIC quirk) ---
+
+    [Fact]
+    public void String_LowByteFirst_decodes_DL205_packed_Hello()
+    {
+        // HR[1040] = 0x6548 (wire BE bytes [0x65, 0x48]) decodes first char from low byte = 'H',
+        // second from high byte = 'e'. HR[1041] = 0x6C6C → 'l','l'. HR[1042] = 0x006F → 'o', nul.
+        var tag = new ModbusTagDefinition("T", ModbusRegion.HoldingRegisters, 0, ModbusDataType.String,
+            StringLength: 5, StringByteOrder: ModbusStringByteOrder.LowByteFirst);
+        var wire = new byte[] { 0x65, 0x48, 0x6C, 0x6C, 0x00, 0x6F };
+        ModbusDriver.DecodeRegister(wire, tag).ShouldBe("Hello");
+    }
+
+    [Fact]
+    public void String_LowByteFirst_decode_truncates_at_first_nul()
+    {
+        // Low-byte-first with only 2 real chars in register 0 (lo='H', hi='i') and the rest nul.
+        var tag = new ModbusTagDefinition("T", ModbusRegion.HoldingRegisters, 0, ModbusDataType.String,
+            StringLength: 6, StringByteOrder: ModbusStringByteOrder.LowByteFirst);
+        var wire = new byte[] { 0x69, 0x48, 0x00, 0x00, 0x00, 0x00 };
+        ModbusDriver.DecodeRegister(wire, tag).ShouldBe("Hi");
+    }
+
+    [Fact]
+    public void String_LowByteFirst_encode_round_trips_with_decode()
+    {
+        var tag = new ModbusTagDefinition("T", ModbusRegion.HoldingRegisters, 0, ModbusDataType.String,
+            StringLength: 5, StringByteOrder: ModbusStringByteOrder.LowByteFirst);
+        var wire = ModbusDriver.EncodeRegister("Hello", tag);
+        // Expect exactly the DL205-documented byte sequence.
+        wire.ShouldBe(new byte[] { 0x65, 0x48, 0x6C, 0x6C, 0x00, 0x6F });
+        ModbusDriver.DecodeRegister(wire, tag).ShouldBe("Hello");
+    }
+
+    [Fact]
+    public void String_HighByteFirst_and_LowByteFirst_differ_on_same_wire()
+    {
+        // Same wire buffer, different byte order → first char switches 'H' vs 'e'.
+        var wire = new byte[] { 0x48, 0x65 };
+        var hi = new ModbusTagDefinition("T", ModbusRegion.HoldingRegisters, 0, ModbusDataType.String,
+            StringLength: 2, StringByteOrder: ModbusStringByteOrder.HighByteFirst);
+        var lo = new ModbusTagDefinition("T", ModbusRegion.HoldingRegisters, 0, ModbusDataType.String,
+            StringLength: 2, StringByteOrder: ModbusStringByteOrder.LowByteFirst);
+        ModbusDriver.DecodeRegister(wire, hi).ShouldBe("He");
+        ModbusDriver.DecodeRegister(wire, lo).ShouldBe("eH");
+    }
+
+    // --- BCD (binary-coded decimal, DL205/DL260 default numeric encoding) ---
+
+    [Theory]
+    [InlineData(0x0000u, 0u)]
+    [InlineData(0x0001u, 1u)]
+    [InlineData(0x0009u, 9u)]
+    [InlineData(0x0010u, 10u)]
+    [InlineData(0x1234u, 1234u)]
+    [InlineData(0x9999u, 9999u)]
+    public void DecodeBcd_16_bit_decodes_expected_decimal(uint raw, uint expected)
+        => ModbusDriver.DecodeBcd(raw, nibbles: 4).ShouldBe(expected);
+
+    [Fact]
+    public void DecodeBcd_rejects_nibbles_above_nine()
+    {
+        Should.Throw<InvalidDataException>(() => ModbusDriver.DecodeBcd(0x00A5u, nibbles: 4))
+            .Message.ShouldContain("Non-BCD nibble");
+    }
+
+    [Theory]
+    [InlineData(0u, 0x0000u)]
+    [InlineData(5u, 0x0005u)]
+    [InlineData(42u, 0x0042u)]
+    [InlineData(1234u, 0x1234u)]
+    [InlineData(9999u, 0x9999u)]
+    public void EncodeBcd_16_bit_encodes_expected_nibbles(uint value, uint expected)
+        => ModbusDriver.EncodeBcd(value, nibbles: 4).ShouldBe(expected);
+
+    [Fact]
+    public void Bcd16_decodes_DL205_register_1234_as_decimal_1234()
+    {
+        // HR[1072] = 0x1234 on the DL205 profile represents decimal 1234. A plain Int16 decode
+        // would return 0x04D2 = 4660 — proof the BCD path is different.
+        var tag = new ModbusTagDefinition("T", ModbusRegion.HoldingRegisters, 0, ModbusDataType.Bcd16);
+        ModbusDriver.DecodeRegister(new byte[] { 0x12, 0x34 }, tag).ShouldBe(1234);
+
+        var int16Tag = tag with { DataType = ModbusDataType.Int16 };
+        ModbusDriver.DecodeRegister(new byte[] { 0x12, 0x34 }, int16Tag).ShouldBe((short)0x1234);
+    }
+
+    [Fact]
+    public void Bcd16_encode_round_trips_with_decode()
+    {
+        var tag = new ModbusTagDefinition("T", ModbusRegion.HoldingRegisters, 0, ModbusDataType.Bcd16);
+        var wire = ModbusDriver.EncodeRegister(4321, tag);
+        wire.ShouldBe(new byte[] { 0x43, 0x21 });
+        ModbusDriver.DecodeRegister(wire, tag).ShouldBe(4321);
+    }
+
+    [Fact]
+    public void Bcd16_encode_rejects_out_of_range_values()
+    {
+        var tag = new ModbusTagDefinition("T", ModbusRegion.HoldingRegisters, 0, ModbusDataType.Bcd16);
+        Should.Throw<OverflowException>(() => ModbusDriver.EncodeRegister(10000, tag))
+            .Message.ShouldContain("4 decimal digits");
+    }
+
+    [Fact]
+    public void Bcd32_decodes_8_digits_big_endian()
+    {
+        // 0x12345678 as BCD = decimal 12_345_678.
+        var tag = new ModbusTagDefinition("T", ModbusRegion.HoldingRegisters, 0, ModbusDataType.Bcd32);
+        ModbusDriver.DecodeRegister(new byte[] { 0x12, 0x34, 0x56, 0x78 }, tag).ShouldBe(12_345_678);
+    }
+
+    [Fact]
+    public void Bcd32_word_swap_handles_CDAB_layout()
+    {
+        // PLC stored 12_345_678 with word swap: low-word 0x5678 first, high-word 0x1234 second.
+        // Wire bytes [0x56, 0x78, 0x12, 0x34] + WordSwap → decode to decimal 12_345_678.
+        var tag = new ModbusTagDefinition("T", ModbusRegion.HoldingRegisters, 0, ModbusDataType.Bcd32,
+            ByteOrder: ModbusByteOrder.WordSwap);
+        ModbusDriver.DecodeRegister(new byte[] { 0x56, 0x78, 0x12, 0x34 }, tag).ShouldBe(12_345_678);
+    }
+
+    [Fact]
+    public void Bcd32_encode_round_trips_with_decode()
+    {
+        var tag = new ModbusTagDefinition("T", ModbusRegion.HoldingRegisters, 0, ModbusDataType.Bcd32);
+        var wire = ModbusDriver.EncodeRegister(87_654_321u, tag);
+        wire.ShouldBe(new byte[] { 0x87, 0x65, 0x43, 0x21 });
+        ModbusDriver.DecodeRegister(wire, tag).ShouldBe(87_654_321);
+    }
+
+    [Fact]
+    public void Bcd_RegisterCount_matches_underlying_width()
+    {
+        var b16 = new ModbusTagDefinition("A", ModbusRegion.HoldingRegisters, 0, ModbusDataType.Bcd16);
+        var b32 = new ModbusTagDefinition("B", ModbusRegion.HoldingRegisters, 0, ModbusDataType.Bcd32);
+        ModbusDriver.RegisterCount(b16).ShouldBe((ushort)1);
+        ModbusDriver.RegisterCount(b32).ShouldBe((ushort)2);
+    }
 }

tests/ZB.MOM.WW.OtOpcUa.Server.Tests/DriverNodeManagerHistoryMappingTests.cs

@@ -0,0 +1,160 @@
+using System.Linq;
+using Opc.Ua;
+using Shouldly;
+using Xunit;
+using ZB.MOM.WW.OtOpcUa.Core.Abstractions;
+using ZB.MOM.WW.OtOpcUa.Server.OpcUa;
+
+namespace ZB.MOM.WW.OtOpcUa.Server.Tests;
+
+/// <summary>
+///     Unit coverage for the static helpers <see cref="DriverNodeManager"/> exposes to bridge
+///     driver-side history data (<see cref="HistoricalEvent"/> + <see cref="DataValueSnapshot"/>)
+///     to the OPC UA on-wire shape (<c>HistoryData</c> / <c>HistoryEvent</c> wrapped in an
+///     <see cref="ExtensionObject"/>). Fast, framework-only — no server fixture.
+/// </summary>
+[Trait("Category", "Unit")]
+public sealed class DriverNodeManagerHistoryMappingTests
+{
+    [Theory]
+    [InlineData(nameof(HistoryAggregateType.Average), HistoryAggregateType.Average)]
+    [InlineData(nameof(HistoryAggregateType.Minimum), HistoryAggregateType.Minimum)]
+    [InlineData(nameof(HistoryAggregateType.Maximum), HistoryAggregateType.Maximum)]
+    [InlineData(nameof(HistoryAggregateType.Total), HistoryAggregateType.Total)]
+    [InlineData(nameof(HistoryAggregateType.Count), HistoryAggregateType.Count)]
+    public void MapAggregate_translates_each_supported_OPC_UA_aggregate_NodeId(
+        string name, HistoryAggregateType expected)
+    {
+        // Resolve the ObjectIds.AggregateFunction_<name> constant via reflection so the test
+        // keeps working if the stack ever renames them — failure means the stack broke its
+        // naming convention, worth surfacing loudly.
+        var field = typeof(ObjectIds).GetField("AggregateFunction_" + name);
+        field.ShouldNotBeNull();
+        var nodeId = (NodeId)field!.GetValue(null)!;
+
+        DriverNodeManager.MapAggregate(nodeId).ShouldBe(expected);
+    }
+
+    [Fact]
+    public void MapAggregate_returns_null_for_unknown_aggregate()
+    {
+        // AggregateFunction_TimeAverage is a valid OPC UA aggregate but not one the driver
+        // surfaces. Null here means the service handler will translate to BadAggregateNotSupported
+        // — the right behavior per Part 13 when the requested aggregate isn't implemented.
+        DriverNodeManager.MapAggregate(ObjectIds.AggregateFunction_TimeAverage).ShouldBeNull();
+    }
+
+    [Fact]
+    public void MapAggregate_returns_null_for_null_input()
+    {
+        // Processed requests that omit the aggregate list (or pass a single null) must not crash.
+        DriverNodeManager.MapAggregate(null).ShouldBeNull();
+    }
+
+    [Fact]
+    public void BuildHistoryData_wraps_samples_as_HistoryData_extension_object()
+    {
+        var samples = new[]
+        {
+            new DataValueSnapshot(Value: 42, StatusCode: StatusCodes.Good,
+                SourceTimestampUtc: new DateTime(2024, 1, 1, 0, 0, 0, DateTimeKind.Utc),
+                ServerTimestampUtc: new DateTime(2024, 1, 1, 0, 0, 1, DateTimeKind.Utc)),
+            new DataValueSnapshot(Value: 99, StatusCode: StatusCodes.Good,
+                SourceTimestampUtc: new DateTime(2024, 1, 1, 0, 0, 5, DateTimeKind.Utc),
+                ServerTimestampUtc: new DateTime(2024, 1, 1, 0, 0, 6, DateTimeKind.Utc)),
+        };
+
+        var ext = DriverNodeManager.BuildHistoryData(samples);
+
+        ext.Body.ShouldBeOfType<HistoryData>();
+        var hd = (HistoryData)ext.Body;
+        hd.DataValues.Count.ShouldBe(2);
+        hd.DataValues[0].Value.ShouldBe(42);
+        hd.DataValues[1].Value.ShouldBe(99);
+        hd.DataValues[0].SourceTimestamp.ShouldBe(new DateTime(2024, 1, 1, 0, 0, 0, DateTimeKind.Utc));
+    }
+
+    [Fact]
+    public void BuildHistoryEvent_wraps_events_with_BaseEventType_field_ordering()
+    {
+        // BuildHistoryEvent populates a fixed field set in BaseEventType's conventional order:
+        // EventId, SourceName, Message, Severity, Time, ReceiveTime. Pinning this so a later
+        // "respect the client's SelectClauses" change can't silently break older clients that
+        // rely on the default layout.
+        var events = new[]
+        {
+            new HistoricalEvent(
+                EventId: "e-1",
+                SourceName: "Tank1.HiAlarm",
+                EventTimeUtc: new DateTime(2024, 1, 1, 12, 0, 0, DateTimeKind.Utc),
+                ReceivedTimeUtc: new DateTime(2024, 1, 1, 12, 0, 0, 5, DateTimeKind.Utc),
+                Message: "High level reached",
+                Severity: 750),
+        };
+
+        var ext = DriverNodeManager.BuildHistoryEvent(events);
+
+        ext.Body.ShouldBeOfType<HistoryEvent>();
+        var he = (HistoryEvent)ext.Body;
+        he.Events.Count.ShouldBe(1);
+        var fields = he.Events[0].EventFields;
+        fields.Count.ShouldBe(6);
+        fields[0].Value.ShouldBe("e-1");                    // EventId
+        fields[1].Value.ShouldBe("Tank1.HiAlarm");          // SourceName
+        ((LocalizedText)fields[2].Value).Text.ShouldBe("High level reached"); // Message
+        fields[3].Value.ShouldBe((ushort)750);              // Severity
+        ((DateTime)fields[4].Value).ShouldBe(new DateTime(2024, 1, 1, 12, 0, 0, DateTimeKind.Utc));
+        ((DateTime)fields[5].Value).ShouldBe(new DateTime(2024, 1, 1, 12, 0, 0, 5, DateTimeKind.Utc));
+    }
+
+    [Fact]
+    public void BuildHistoryEvent_substitutes_empty_string_for_null_SourceName_and_Message()
+    {
+        // Driver-side nulls are preserved through the wire contract by design (distinguishes
+        // "system event with no source" from "source unknown"), but OPC UA Variants of type
+        // String must not carry null — the stack serializes null-string as empty. This test
+        // pins the choice so a nullable-Variant refactor doesn't break clients that display
+        // the field without a null check.
+        var events = new[]
+        {
+            new HistoricalEvent("sys", null, DateTime.UtcNow, DateTime.UtcNow, null, 1),
+        };
+
+        var ext = DriverNodeManager.BuildHistoryEvent(events);
+        var fields = ((HistoryEvent)ext.Body).Events[0].EventFields;
+        fields[1].Value.ShouldBe(string.Empty);
+        ((LocalizedText)fields[2].Value).Text.ShouldBe(string.Empty);
+    }
+
+    [Fact]
+    public void ToDataValue_preserves_status_code_and_timestamps()
+    {
+        var snap = new DataValueSnapshot(
+            Value: 123.45,
+            StatusCode: StatusCodes.UncertainSubstituteValue,
+            SourceTimestampUtc: new DateTime(2024, 5, 1, 10, 0, 0, DateTimeKind.Utc),
+            ServerTimestampUtc: new DateTime(2024, 5, 1, 10, 0, 1, DateTimeKind.Utc));
+
+        var dv = DriverNodeManager.ToDataValue(snap);
+
+        dv.Value.ShouldBe(123.45);
+        dv.StatusCode.Code.ShouldBe(StatusCodes.UncertainSubstituteValue);
+        dv.SourceTimestamp.ShouldBe(new DateTime(2024, 5, 1, 10, 0, 0, DateTimeKind.Utc));
+        dv.ServerTimestamp.ShouldBe(new DateTime(2024, 5, 1, 10, 0, 1, DateTimeKind.Utc));
+    }
+
+    [Fact]
+    public void ToDataValue_leaves_SourceTimestamp_default_when_snapshot_has_no_source_time()
+    {
+        // Galaxy's raw-history rows often carry only a ServerTimestamp (the historian knows
+        // when it wrote the row, not when the process sampled it). The mapping must not
+        // synthesize a bogus SourceTimestamp from ServerTimestamp — that would lie to the
+        // client about the measurement's actual time.
+        var snap = new DataValueSnapshot(Value: 1, StatusCode: 0,
+            SourceTimestampUtc: null,
+            ServerTimestampUtc: new DateTime(2024, 5, 1, 10, 0, 1, DateTimeKind.Utc));
+
+        var dv = DriverNodeManager.ToDataValue(snap);
+        dv.SourceTimestamp.ShouldBe(default);
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Server.Tests/HistoryReadIntegrationTests.cs

@@ -0,0 +1,356 @@
+using Microsoft.Extensions.Logging.Abstractions;
+using Opc.Ua;
+using Opc.Ua.Client;
+using Opc.Ua.Configuration;
+using Shouldly;
+using Xunit;
+using ZB.MOM.WW.OtOpcUa.Core.Abstractions;
+using ZB.MOM.WW.OtOpcUa.Core.Hosting;
+using ZB.MOM.WW.OtOpcUa.Server.OpcUa;
+using ZB.MOM.WW.OtOpcUa.Server.Security;
+// Core.Abstractions.HistoryReadResult (driver-side samples) collides with Opc.Ua.HistoryReadResult
+// (service-layer per-node result). Alias the driver type so the stub's interface implementations
+// are unambiguous.
+using DriverHistoryReadResult = ZB.MOM.WW.OtOpcUa.Core.Abstractions.HistoryReadResult;
+
+namespace ZB.MOM.WW.OtOpcUa.Server.Tests;
+
+/// <summary>
+///     End-to-end test that a real OPC UA client's HistoryRead service reaches a fake driver's
+///     <see cref="IHistoryProvider"/> via <see cref="DriverNodeManager"/>'s
+///     <c>HistoryReadRawModified</c> / <c>HistoryReadProcessed</c> / <c>HistoryReadAtTime</c> /
+///     <c>HistoryReadEvents</c> overrides. Boots the full OPC UA stack + a stub
+///     <see cref="IHistoryProvider"/> driver, opens a client session, issues each HistoryRead
+///     variant, and asserts the client receives the expected per-kind payload.
+/// </summary>
+[Trait("Category", "Integration")]
+public sealed class HistoryReadIntegrationTests : IAsyncLifetime
+{
+    private static readonly int Port = 48600 + Random.Shared.Next(0, 99);
+    private readonly string _endpoint = $"opc.tcp://localhost:{Port}/OtOpcUaHistoryTest";
+    private readonly string _pkiRoot = Path.Combine(Path.GetTempPath(), $"otopcua-history-test-{Guid.NewGuid():N}");
+
+    private DriverHost _driverHost = null!;
+    private OpcUaApplicationHost _server = null!;
+    private HistoryDriver _driver = null!;
+
+    public async ValueTask InitializeAsync()
+    {
+        _driverHost = new DriverHost();
+        _driver = new HistoryDriver();
+        await _driverHost.RegisterAsync(_driver, "{}", CancellationToken.None);
+
+        var options = new OpcUaServerOptions
+        {
+            EndpointUrl = _endpoint,
+            ApplicationName = "OtOpcUaHistoryTest",
+            ApplicationUri = "urn:OtOpcUa:Server:HistoryTest",
+            PkiStoreRoot = _pkiRoot,
+            AutoAcceptUntrustedClientCertificates = true,
+        };
+
+        _server = new OpcUaApplicationHost(options, _driverHost, new DenyAllUserAuthenticator(),
+            NullLoggerFactory.Instance, NullLogger<OpcUaApplicationHost>.Instance);
+        await _server.StartAsync(CancellationToken.None);
+    }
+
+    public async ValueTask DisposeAsync()
+    {
+        await _server.DisposeAsync();
+        await _driverHost.DisposeAsync();
+        try { Directory.Delete(_pkiRoot, recursive: true); } catch { /* best-effort */ }
+    }
+
+    [Fact]
+    public async Task HistoryReadRaw_round_trips_driver_samples_to_the_client()
+    {
+        using var session = await OpenSessionAsync();
+        var nsIndex = (ushort)session.NamespaceUris.GetIndex("urn:OtOpcUa:history-driver");
+        var nodeId = new NodeId("raw.var", nsIndex);
+
+        // The Opc.Ua client exposes HistoryRead via Session.HistoryRead. We construct a
+        // ReadRawModifiedDetails (IsReadModified=false → raw path) and a single
+        // HistoryReadValueId targeting the driver-backed variable.
+        var details = new ReadRawModifiedDetails
+        {
+            StartTime = new DateTime(2024, 1, 1, 0, 0, 0, DateTimeKind.Utc),
+            EndTime = new DateTime(2024, 1, 1, 0, 0, 10, DateTimeKind.Utc),
+            NumValuesPerNode = 100,
+            IsReadModified = false,
+            ReturnBounds = false,
+        };
+        var extObj = new ExtensionObject(details);
+        var nodesToRead = new HistoryReadValueIdCollection { new() { NodeId = nodeId } };
+
+        session.HistoryRead(null, extObj, TimestampsToReturn.Both, false, nodesToRead,
+            out var results, out _);
+
+        results.Count.ShouldBe(1);
+        results[0].StatusCode.Code.ShouldBe(StatusCodes.Good, $"HistoryReadRaw returned {results[0].StatusCode}");
+        var hd = (HistoryData)ExtensionObject.ToEncodeable(results[0].HistoryData);
+        hd.DataValues.Count.ShouldBe(_driver.RawSamplesReturned, "one DataValue per driver sample");
+        hd.DataValues[0].Value.ShouldBe(_driver.FirstRawValue);
+    }
+
+    [Fact]
+    public async Task HistoryReadProcessed_maps_Average_aggregate_and_routes_to_ReadProcessedAsync()
+    {
+        using var session = await OpenSessionAsync();
+        var nsIndex = (ushort)session.NamespaceUris.GetIndex("urn:OtOpcUa:history-driver");
+        var nodeId = new NodeId("proc.var", nsIndex);
+
+        var details = new ReadProcessedDetails
+        {
+            StartTime = new DateTime(2024, 1, 1, 0, 0, 0, DateTimeKind.Utc),
+            EndTime = new DateTime(2024, 1, 1, 0, 1, 0, DateTimeKind.Utc),
+            ProcessingInterval = 10_000, // 10s buckets
+            AggregateType = [ObjectIds.AggregateFunction_Average],
+        };
+        var extObj = new ExtensionObject(details);
+        var nodesToRead = new HistoryReadValueIdCollection { new() { NodeId = nodeId } };
+
+        session.HistoryRead(null, extObj, TimestampsToReturn.Both, false, nodesToRead,
+            out var results, out _);
+
+        results[0].StatusCode.Code.ShouldBe(StatusCodes.Good);
+        _driver.LastProcessedAggregate.ShouldBe(HistoryAggregateType.Average,
+            "MapAggregate must translate ObjectIds.AggregateFunction_Average → driver enum");
+        _driver.LastProcessedInterval.ShouldBe(TimeSpan.FromSeconds(10));
+    }
+
+    [Fact]
+    public async Task HistoryReadProcessed_returns_BadAggregateNotSupported_for_unmapped_aggregate()
+    {
+        using var session = await OpenSessionAsync();
+        var nsIndex = (ushort)session.NamespaceUris.GetIndex("urn:OtOpcUa:history-driver");
+        var nodeId = new NodeId("proc.var", nsIndex);
+
+        var details = new ReadProcessedDetails
+        {
+            StartTime = new DateTime(2024, 1, 1, 0, 0, 0, DateTimeKind.Utc),
+            EndTime = new DateTime(2024, 1, 1, 0, 1, 0, DateTimeKind.Utc),
+            ProcessingInterval = 10_000,
+            // TimeAverage is a valid OPC UA aggregate NodeId but not one the driver implements —
+            // the override returns BadAggregateNotSupported per Part 13 rather than coercing.
+            AggregateType = [ObjectIds.AggregateFunction_TimeAverage],
+        };
+        var extObj = new ExtensionObject(details);
+        var nodesToRead = new HistoryReadValueIdCollection { new() { NodeId = nodeId } };
+
+        session.HistoryRead(null, extObj, TimestampsToReturn.Both, false, nodesToRead,
+            out var results, out _);
+
+        results[0].StatusCode.Code.ShouldBe(StatusCodes.BadAggregateNotSupported);
+    }
+
+    [Fact]
+    public async Task HistoryReadAtTime_forwards_timestamp_list_to_driver()
+    {
+        using var session = await OpenSessionAsync();
+        var nsIndex = (ushort)session.NamespaceUris.GetIndex("urn:OtOpcUa:history-driver");
+        var nodeId = new NodeId("atTime.var", nsIndex);
+
+        var t1 = new DateTime(2024, 3, 1, 10, 0, 0, DateTimeKind.Utc);
+        var t2 = new DateTime(2024, 3, 1, 10, 0, 30, DateTimeKind.Utc);
+        var details = new ReadAtTimeDetails { ReqTimes = new DateTimeCollection { t1, t2 } };
+        var extObj = new ExtensionObject(details);
+        var nodesToRead = new HistoryReadValueIdCollection { new() { NodeId = nodeId } };
+
+        session.HistoryRead(null, extObj, TimestampsToReturn.Both, false, nodesToRead,
+            out var results, out _);
+
+        results[0].StatusCode.Code.ShouldBe(StatusCodes.Good);
+        _driver.LastAtTimeRequestedTimes.ShouldNotBeNull();
+        _driver.LastAtTimeRequestedTimes!.Count.ShouldBe(2);
+        _driver.LastAtTimeRequestedTimes[0].ShouldBe(t1);
+        _driver.LastAtTimeRequestedTimes[1].ShouldBe(t2);
+    }
+
+    [Fact]
+    public async Task HistoryReadEvents_returns_HistoryEvent_with_BaseEventType_field_list()
+    {
+        using var session = await OpenSessionAsync();
+        // Events target the driver-root notifier (not a specific variable) which is the
+        // conventional pattern for alarm-history browse.
+        var nsIndex = (ushort)session.NamespaceUris.GetIndex("urn:OtOpcUa:history-driver");
+        var nodeId = new NodeId("history-driver", nsIndex);
+
+        // EventFilter must carry at least one SelectClause or the stack rejects it as
+        // BadEventFilterInvalid before our override runs — empty filters are spec-forbidden.
+        // We populate the standard BaseEventType selectors any real client would send; my
+        // override's BuildHistoryEvent ignores the specific clauses and emits the canonical
+        // field list anyway (the richer "respect exact SelectClauses" behavior is on the PR 38
+        // follow-up list).
+        var filter = new EventFilter();
+        filter.AddSelectClause(ObjectTypeIds.BaseEventType, BrowseNames.EventId);
+        filter.AddSelectClause(ObjectTypeIds.BaseEventType, BrowseNames.SourceName);
+        filter.AddSelectClause(ObjectTypeIds.BaseEventType, BrowseNames.Message);
+        filter.AddSelectClause(ObjectTypeIds.BaseEventType, BrowseNames.Severity);
+        filter.AddSelectClause(ObjectTypeIds.BaseEventType, BrowseNames.Time);
+        filter.AddSelectClause(ObjectTypeIds.BaseEventType, BrowseNames.ReceiveTime);
+
+        var details = new ReadEventDetails
+        {
+            StartTime = new DateTime(2024, 1, 1, 0, 0, 0, DateTimeKind.Utc),
+            EndTime = new DateTime(2024, 12, 31, 0, 0, 0, DateTimeKind.Utc),
+            NumValuesPerNode = 10,
+            Filter = filter,
+        };
+        var extObj = new ExtensionObject(details);
+        var nodesToRead = new HistoryReadValueIdCollection { new() { NodeId = nodeId } };
+
+        session.HistoryRead(null, extObj, TimestampsToReturn.Both, false, nodesToRead,
+            out var results, out _);
+
+        results[0].StatusCode.Code.ShouldBe(StatusCodes.Good);
+        var he = (HistoryEvent)ExtensionObject.ToEncodeable(results[0].HistoryData);
+        he.Events.Count.ShouldBe(_driver.EventsReturned);
+        he.Events[0].EventFields.Count.ShouldBe(6, "BaseEventType default field layout is 6 entries");
+    }
+
+    private async Task<ISession> OpenSessionAsync()
+    {
+        var cfg = new ApplicationConfiguration
+        {
+            ApplicationName = "OtOpcUaHistoryTestClient",
+            ApplicationUri = "urn:OtOpcUa:HistoryTestClient",
+            ApplicationType = ApplicationType.Client,
+            SecurityConfiguration = new SecurityConfiguration
+            {
+                ApplicationCertificate = new CertificateIdentifier
+                {
+                    StoreType = CertificateStoreType.Directory,
+                    StorePath = Path.Combine(_pkiRoot, "client-own"),
+                    SubjectName = "CN=OtOpcUaHistoryTestClient",
+                },
+                TrustedIssuerCertificates = new CertificateTrustList { StoreType = CertificateStoreType.Directory, StorePath = Path.Combine(_pkiRoot, "client-issuers") },
+                TrustedPeerCertificates = new CertificateTrustList { StoreType = CertificateStoreType.Directory, StorePath = Path.Combine(_pkiRoot, "client-trusted") },
+                RejectedCertificateStore = new CertificateTrustList { StoreType = CertificateStoreType.Directory, StorePath = Path.Combine(_pkiRoot, "client-rejected") },
+                AutoAcceptUntrustedCertificates = true,
+                AddAppCertToTrustedStore = true,
+            },
+            TransportConfigurations = new TransportConfigurationCollection(),
+            TransportQuotas = new TransportQuotas { OperationTimeout = 15000 },
+            ClientConfiguration = new ClientConfiguration { DefaultSessionTimeout = 60000 },
+        };
+        await cfg.Validate(ApplicationType.Client);
+        cfg.CertificateValidator.CertificateValidation += (_, e) => e.Accept = true;
+
+        var instance = new ApplicationInstance { ApplicationConfiguration = cfg, ApplicationType = ApplicationType.Client };
+        await instance.CheckApplicationInstanceCertificate(true, CertificateFactory.DefaultKeySize);
+
+        var selected = CoreClientUtils.SelectEndpoint(cfg, _endpoint, useSecurity: false);
+        var endpointConfig = EndpointConfiguration.Create(cfg);
+        var configuredEndpoint = new ConfiguredEndpoint(null, selected, endpointConfig);
+
+        return await Session.Create(cfg, configuredEndpoint, false, "OtOpcUaHistoryTestClientSession", 60000,
+            new UserIdentity(new AnonymousIdentityToken()), null);
+    }
+
+    /// <summary>
+    ///     Stub driver that implements <see cref="IHistoryProvider"/> so the service dispatch
+    ///     can be verified without bringing up a real Galaxy or Historian. Captures the last-
+    ///     seen arguments so tests can assert what the service handler forwarded.
+    /// </summary>
+    private sealed class HistoryDriver : IDriver, ITagDiscovery, IReadable, IHistoryProvider
+    {
+        public string DriverInstanceId => "history-driver";
+        public string DriverType => "HistoryStub";
+
+        public int RawSamplesReturned => 3;
+        public int FirstRawValue => 100;
+        public int EventsReturned => 2;
+
+        public HistoryAggregateType? LastProcessedAggregate { get; private set; }
+        public TimeSpan? LastProcessedInterval { get; private set; }
+        public IReadOnlyList<DateTime>? LastAtTimeRequestedTimes { get; private set; }
+
+        public Task InitializeAsync(string driverConfigJson, CancellationToken ct) => Task.CompletedTask;
+        public Task ReinitializeAsync(string driverConfigJson, CancellationToken ct) => Task.CompletedTask;
+        public Task ShutdownAsync(CancellationToken ct) => Task.CompletedTask;
+        public DriverHealth GetHealth() => new(DriverState.Healthy, DateTime.UtcNow, null);
+        public long GetMemoryFootprint() => 0;
+        public Task FlushOptionalCachesAsync(CancellationToken ct) => Task.CompletedTask;
+
+        public Task DiscoverAsync(IAddressSpaceBuilder builder, CancellationToken ct)
+        {
+            // Every variable must be Historized for HistoryRead to route — the node-manager's
+            // stack base class checks the bit before dispatching.
+            builder.Variable("raw", "raw",
+                new DriverAttributeInfo("raw.var", DriverDataType.Int32, false, null,
+                    SecurityClassification.FreeAccess, IsHistorized: true, IsAlarm: false));
+            builder.Variable("proc", "proc",
+                new DriverAttributeInfo("proc.var", DriverDataType.Float64, false, null,
+                    SecurityClassification.FreeAccess, IsHistorized: true, IsAlarm: false));
+            builder.Variable("atTime", "atTime",
+                new DriverAttributeInfo("atTime.var", DriverDataType.Int32, false, null,
+                    SecurityClassification.FreeAccess, IsHistorized: true, IsAlarm: false));
+            return Task.CompletedTask;
+        }
+
+        public Task<IReadOnlyList<DataValueSnapshot>> ReadAsync(
+            IReadOnlyList<string> fullReferences, CancellationToken cancellationToken)
+        {
+            var now = DateTime.UtcNow;
+            IReadOnlyList<DataValueSnapshot> r =
+                [.. fullReferences.Select(_ => new DataValueSnapshot(0, 0u, now, now))];
+            return Task.FromResult(r);
+        }
+
+        public Task<DriverHistoryReadResult> ReadRawAsync(
+            string fullReference, DateTime startUtc, DateTime endUtc, uint maxValuesPerNode,
+            CancellationToken cancellationToken)
+        {
+            var samples = new List<DataValueSnapshot>();
+            for (var i = 0; i < RawSamplesReturned; i++)
+            {
+                samples.Add(new DataValueSnapshot(
+                    Value: FirstRawValue + i,
+                    StatusCode: StatusCodes.Good,
+                    SourceTimestampUtc: startUtc.AddSeconds(i),
+                    ServerTimestampUtc: startUtc.AddSeconds(i)));
+            }
+            return Task.FromResult(new DriverHistoryReadResult(samples, null));
+        }
+
+        public Task<DriverHistoryReadResult> ReadProcessedAsync(
+            string fullReference, DateTime startUtc, DateTime endUtc, TimeSpan interval,
+            HistoryAggregateType aggregate, CancellationToken cancellationToken)
+        {
+            LastProcessedAggregate = aggregate;
+            LastProcessedInterval = interval;
+            return Task.FromResult(new DriverHistoryReadResult(
+                [new DataValueSnapshot(1.0, StatusCodes.Good, startUtc, startUtc)],
+                null));
+        }
+
+        public Task<DriverHistoryReadResult> ReadAtTimeAsync(
+            string fullReference, IReadOnlyList<DateTime> timestampsUtc,
+            CancellationToken cancellationToken)
+        {
+            LastAtTimeRequestedTimes = timestampsUtc;
+            var samples = timestampsUtc
+                .Select(t => new DataValueSnapshot(42, StatusCodes.Good, t, t))
+                .ToArray();
+            return Task.FromResult(new DriverHistoryReadResult(samples, null));
+        }
+
+        public Task<HistoricalEventsResult> ReadEventsAsync(
+            string? sourceName, DateTime startUtc, DateTime endUtc, int maxEvents,
+            CancellationToken cancellationToken)
+        {
+            var events = new List<HistoricalEvent>();
+            for (var i = 0; i < EventsReturned; i++)
+            {
+                events.Add(new HistoricalEvent(
+                    EventId: $"e{i}",
+                    SourceName: sourceName,
+                    EventTimeUtc: startUtc.AddHours(i),
+                    ReceivedTimeUtc: startUtc.AddHours(i).AddSeconds(1),
+                    Message: $"Event {i}",
+                    Severity: (ushort)(500 + i)));
+            }
+            return Task.FromResult(new HistoricalEventsResult(events, null));
+        }
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Server.Tests/HostStatusPublisherTests.cs

@@ -0,0 +1,197 @@
+using Microsoft.EntityFrameworkCore;
+using Microsoft.Extensions.DependencyInjection;
+using Microsoft.Extensions.Logging.Abstractions;
+using Shouldly;
+using Xunit;
+using ZB.MOM.WW.OtOpcUa.Configuration;
+using ZB.MOM.WW.OtOpcUa.Configuration.Enums;
+using ZB.MOM.WW.OtOpcUa.Core.Abstractions;
+using ZB.MOM.WW.OtOpcUa.Core.Hosting;
+using ZB.MOM.WW.OtOpcUa.Server;
+
+namespace ZB.MOM.WW.OtOpcUa.Server.Tests;
+
+[Trait("Category", "Integration")]
+public sealed class HostStatusPublisherTests : IDisposable
+{
+    private const string DefaultServer = "localhost,14330";
+    private const string DefaultSaPassword = "OtOpcUaDev_2026!";
+
+    private readonly string _databaseName = $"OtOpcUaPublisher_{Guid.NewGuid():N}";
+    private readonly string _connectionString;
+    private readonly ServiceProvider _sp;
+
+    public HostStatusPublisherTests()
+    {
+        var server = Environment.GetEnvironmentVariable("OTOPCUA_CONFIG_TEST_SERVER") ?? DefaultServer;
+        var password = Environment.GetEnvironmentVariable("OTOPCUA_CONFIG_TEST_SA_PASSWORD") ?? DefaultSaPassword;
+        _connectionString =
+            $"Server={server};Database={_databaseName};User Id=sa;Password={password};TrustServerCertificate=True;Encrypt=False;";
+
+        var services = new ServiceCollection();
+        services.AddLogging();
+        services.AddDbContext<OtOpcUaConfigDbContext>(o => o.UseSqlServer(_connectionString));
+        _sp = services.BuildServiceProvider();
+
+        using var scope = _sp.CreateScope();
+        scope.ServiceProvider.GetRequiredService<OtOpcUaConfigDbContext>().Database.Migrate();
+    }
+
+    public void Dispose()
+    {
+        _sp.Dispose();
+        using var conn = new Microsoft.Data.SqlClient.SqlConnection(
+            new Microsoft.Data.SqlClient.SqlConnectionStringBuilder(_connectionString) { InitialCatalog = "master" }.ConnectionString);
+        conn.Open();
+        using var cmd = conn.CreateCommand();
+        cmd.CommandText = $@"
+IF DB_ID(N'{_databaseName}') IS NOT NULL
+BEGIN
+    ALTER DATABASE [{_databaseName}] SET SINGLE_USER WITH ROLLBACK IMMEDIATE;
+    DROP DATABASE [{_databaseName}];
+END";
+        cmd.ExecuteNonQuery();
+    }
+
+    [Fact]
+    public async Task Publisher_upserts_one_row_per_host_reported_by_each_probe_driver()
+    {
+        var driverHost = new DriverHost();
+        await driverHost.RegisterAsync(new ProbeStubDriver("driver-a",
+            new HostConnectivityStatus("HostA1", HostState.Running, DateTime.UtcNow),
+            new HostConnectivityStatus("HostA2", HostState.Stopped, DateTime.UtcNow)),
+            "{}", CancellationToken.None);
+        await driverHost.RegisterAsync(new NonProbeStubDriver("driver-no-probe"), "{}", CancellationToken.None);
+
+        var nodeOptions = NewNodeOptions("node-a");
+        var publisher = new HostStatusPublisher(driverHost, nodeOptions, _sp.GetRequiredService<IServiceScopeFactory>(),
+            NullLogger<HostStatusPublisher>.Instance);
+
+        await publisher.PublishOnceAsync(CancellationToken.None);
+
+        using var scope = _sp.CreateScope();
+        var db = scope.ServiceProvider.GetRequiredService<OtOpcUaConfigDbContext>();
+        var rows = await db.DriverHostStatuses.AsNoTracking().ToListAsync();
+
+        rows.Count.ShouldBe(2, "driver-no-probe doesn't implement IHostConnectivityProbe — no rows for it");
+        rows.ShouldContain(r => r.HostName == "HostA1" && r.State == DriverHostState.Running && r.DriverInstanceId == "driver-a");
+        rows.ShouldContain(r => r.HostName == "HostA2" && r.State == DriverHostState.Stopped && r.DriverInstanceId == "driver-a");
+        rows.ShouldAllBe(r => r.NodeId == "node-a");
+    }
+
+    [Fact]
+    public async Task Second_tick_updates_LastSeenUtc_without_creating_duplicate_rows()
+    {
+        var driver = new ProbeStubDriver("driver-x",
+            new HostConnectivityStatus("HostX", HostState.Running, DateTime.UtcNow));
+        var driverHost = new DriverHost();
+        await driverHost.RegisterAsync(driver, "{}", CancellationToken.None);
+
+        var publisher = new HostStatusPublisher(driverHost, NewNodeOptions("node-x"),
+            _sp.GetRequiredService<IServiceScopeFactory>(),
+            NullLogger<HostStatusPublisher>.Instance);
+
+        await publisher.PublishOnceAsync(CancellationToken.None);
+        var firstSeen = await SingleRowAsync("node-x", "driver-x", "HostX");
+        await Task.Delay(50); // guarantee a later wall-clock value so LastSeenUtc advances
+        await publisher.PublishOnceAsync(CancellationToken.None);
+        var secondSeen = await SingleRowAsync("node-x", "driver-x", "HostX");
+
+        secondSeen.LastSeenUtc.ShouldBeGreaterThan(firstSeen.LastSeenUtc,
+            "heartbeat advances LastSeenUtc so Admin can stale-flag rows from crashed Servers");
+
+        // Still exactly one row — a naive Add-every-tick would have thrown or duplicated.
+        using var scope = _sp.CreateScope();
+        var db = scope.ServiceProvider.GetRequiredService<OtOpcUaConfigDbContext>();
+        (await db.DriverHostStatuses.CountAsync(r => r.NodeId == "node-x")).ShouldBe(1);
+    }
+
+    [Fact]
+    public async Task State_change_between_ticks_updates_State_and_StateChangedUtc()
+    {
+        var driver = new ProbeStubDriver("driver-y",
+            new HostConnectivityStatus("HostY", HostState.Running, DateTime.UtcNow.AddSeconds(-10)));
+        var driverHost = new DriverHost();
+        await driverHost.RegisterAsync(driver, "{}", CancellationToken.None);
+
+        var publisher = new HostStatusPublisher(driverHost, NewNodeOptions("node-y"),
+            _sp.GetRequiredService<IServiceScopeFactory>(),
+            NullLogger<HostStatusPublisher>.Instance);
+
+        await publisher.PublishOnceAsync(CancellationToken.None);
+        var before = await SingleRowAsync("node-y", "driver-y", "HostY");
+
+        // Swap the driver's reported state to Faulted with a newer transition timestamp.
+        var newChange = DateTime.UtcNow;
+        driver.Statuses = [new HostConnectivityStatus("HostY", HostState.Faulted, newChange)];
+        await publisher.PublishOnceAsync(CancellationToken.None);
+
+        var after = await SingleRowAsync("node-y", "driver-y", "HostY");
+        after.State.ShouldBe(DriverHostState.Faulted);
+        // datetime2(3) has millisecond precision — DateTime.UtcNow carries up to 100ns ticks,
+        // so the stored value rounds down. Compare at millisecond granularity to stay clean.
+        after.StateChangedUtc.ShouldBe(newChange, tolerance: TimeSpan.FromMilliseconds(1));
+        after.StateChangedUtc.ShouldBeGreaterThan(before.StateChangedUtc,
+            "StateChangedUtc must advance when the state actually changed");
+        before.State.ShouldBe(DriverHostState.Running);
+    }
+
+    [Fact]
+    public void MapState_translates_every_HostState_member()
+    {
+        HostStatusPublisher.MapState(HostState.Running).ShouldBe(DriverHostState.Running);
+        HostStatusPublisher.MapState(HostState.Stopped).ShouldBe(DriverHostState.Stopped);
+        HostStatusPublisher.MapState(HostState.Faulted).ShouldBe(DriverHostState.Faulted);
+        HostStatusPublisher.MapState(HostState.Unknown).ShouldBe(DriverHostState.Unknown);
+    }
+
+    private async Task<Configuration.Entities.DriverHostStatus> SingleRowAsync(string node, string driver, string host)
+    {
+        using var scope = _sp.CreateScope();
+        var db = scope.ServiceProvider.GetRequiredService<OtOpcUaConfigDbContext>();
+        return await db.DriverHostStatuses.AsNoTracking()
+            .SingleAsync(r => r.NodeId == node && r.DriverInstanceId == driver && r.HostName == host);
+    }
+
+    private static NodeOptions NewNodeOptions(string nodeId) => new()
+    {
+        NodeId = nodeId,
+        ClusterId = "cluster-t",
+        ConfigDbConnectionString = "unused-publisher-gets-db-from-scope",
+    };
+
+    private sealed class ProbeStubDriver(string id, params HostConnectivityStatus[] initial)
+        : IDriver, IHostConnectivityProbe
+    {
+        public HostConnectivityStatus[] Statuses { get; set; } = initial;
+        public string DriverInstanceId => id;
+        public string DriverType => "ProbeStub";
+
+        public event EventHandler<HostStatusChangedEventArgs>? OnHostStatusChanged;
+
+        public Task InitializeAsync(string driverConfigJson, CancellationToken ct) => Task.CompletedTask;
+        public Task ReinitializeAsync(string driverConfigJson, CancellationToken ct) => Task.CompletedTask;
+        public Task ShutdownAsync(CancellationToken ct) => Task.CompletedTask;
+        public DriverHealth GetHealth() => new(DriverState.Healthy, DateTime.UtcNow, null);
+        public long GetMemoryFootprint() => 0;
+        public Task FlushOptionalCachesAsync(CancellationToken ct) => Task.CompletedTask;
+
+        public IReadOnlyList<HostConnectivityStatus> GetHostStatuses() => Statuses;
+
+        // Keeps the compiler happy — event is part of the interface contract even if unused here.
+        internal void Raise(HostStatusChangedEventArgs e) => OnHostStatusChanged?.Invoke(this, e);
+    }
+
+    private sealed class NonProbeStubDriver(string id) : IDriver
+    {
+        public string DriverInstanceId => id;
+        public string DriverType => "NonProbeStub";
+
+        public Task InitializeAsync(string driverConfigJson, CancellationToken ct) => Task.CompletedTask;
+        public Task ReinitializeAsync(string driverConfigJson, CancellationToken ct) => Task.CompletedTask;
+        public Task ShutdownAsync(CancellationToken ct) => Task.CompletedTask;
+        public DriverHealth GetHealth() => new(DriverState.Healthy, DateTime.UtcNow, null);
+        public long GetMemoryFootprint() => 0;
+        public Task FlushOptionalCachesAsync(CancellationToken ct) => Task.CompletedTask;
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Server.Tests/LdapUserAuthenticatorAdCompatTests.cs

@@ -0,0 +1,67 @@
+using Shouldly;
+using Xunit;
+using ZB.MOM.WW.OtOpcUa.Server.Security;
+
+namespace ZB.MOM.WW.OtOpcUa.Server.Tests;
+
+/// <summary>
+///     Deterministic guards for Active Directory compatibility of the internal helpers
+///     <see cref="LdapUserAuthenticator"/> relies on. We can't live-bind against AD in unit
+///     tests — instead, we pin the behaviors AD depends on (DN-parsing of AD-style
+///     <c>memberOf</c> values, filter escaping with case-preserving RDN extraction) so a
+///     future refactor can't silently break the AD path while the GLAuth live-smoke stays
+///     green.
+/// </summary>
+[Trait("Category", "Unit")]
+public sealed class LdapUserAuthenticatorAdCompatTests
+{
+    [Fact]
+    public void ExtractFirstRdnValue_parses_AD_memberOf_group_name_from_CN_dn()
+    {
+        // AD's memberOf values use uppercase CN=… and full domain paths. The extractor
+        // returns the first RDN's value regardless of attribute-type case, so operators'
+        // GroupToRole keys stay readable ("OPCUA-Operators" not "CN=OPCUA-Operators,...").
+        var dn = "CN=OPCUA-Operators,OU=OPC UA Security Groups,OU=Groups,DC=corp,DC=example,DC=com";
+        LdapUserAuthenticator.ExtractFirstRdnValue(dn).ShouldBe("OPCUA-Operators");
+    }
+
+    [Fact]
+    public void ExtractFirstRdnValue_handles_mixed_case_and_spaces_in_group_name()
+    {
+        var dn = "CN=Domain Users,CN=Users,DC=corp,DC=example,DC=com";
+        LdapUserAuthenticator.ExtractFirstRdnValue(dn).ShouldBe("Domain Users");
+    }
+
+    [Fact]
+    public void ExtractFirstRdnValue_also_works_for_OpenLDAP_ou_style_memberOf()
+    {
+        // GLAuth + some OpenLDAP deployments expose memberOf as ou=<group>,ou=groups,...
+        // The authenticator needs one extractor that tolerates both shapes since directories
+        // in the field mix them depending on schema.
+        var dn = "ou=WriteOperate,ou=groups,dc=lmxopcua,dc=local";
+        LdapUserAuthenticator.ExtractFirstRdnValue(dn).ShouldBe("WriteOperate");
+    }
+
+    [Fact]
+    public void EscapeLdapFilter_prevents_injection_via_samaccountname_lookup()
+    {
+        // AD login names can contain characters that are meaningful to LDAP filter syntax
+        // (parens, backslashes). The authenticator builds filters as
+        // ($"({UserNameAttribute}={EscapeLdapFilter(username)})") so injection attempts must
+        // not break out of the filter. The RFC 4515 escape set is: \ → \5c, * → \2a, ( → \28,
+        // ) → \29, \0 → \00.
+        LdapUserAuthenticator.EscapeLdapFilter("admin)(cn=*")
+            .ShouldBe("admin\\29\\28cn=\\2a");
+        LdapUserAuthenticator.EscapeLdapFilter("domain\\user")
+            .ShouldBe("domain\\5cuser");
+    }
+
+    [Fact]
+    public void LdapOptions_default_UserNameAttribute_is_uid_for_rfc2307_compat()
+    {
+        // Regression guard: PR 31 introduced UserNameAttribute with a default of "uid" so
+        // existing deployments (pre-AD config) keep working. Changing the default breaks
+        // everyone's config silently; require an explicit review.
+        new LdapOptions().UserNameAttribute.ShouldBe("uid");
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Server.Tests/LdapUserAuthenticatorLiveTests.cs

@@ -0,0 +1,154 @@
+using System.Net.Sockets;
+using Microsoft.Extensions.Logging.Abstractions;
+using Shouldly;
+using Xunit;
+using ZB.MOM.WW.OtOpcUa.Server.Security;
+
+namespace ZB.MOM.WW.OtOpcUa.Server.Tests;
+
+/// <summary>
+///     Live-service tests against the dev GLAuth instance at <c>localhost:3893</c>. Skipped
+///     when the port is unreachable so the test suite stays portable on boxes without a
+///     running directory. Closes LMX follow-up #4 — the server-side <see cref="LdapUserAuthenticator"/>
+///     is exercised end-to-end against a real LDAP server (same one the Admin process uses),
+///     not just the flow-shape unit tests from PR 19.
+/// </summary>
+/// <remarks>
+///     The <c>Admin.Tests</c> project already has a live-bind test for its own
+///     <c>LdapAuthService</c>; this pair catches divergence between the two bind paths — the
+///     Server authenticator has to work even when the Server process is on a machine that
+///     doesn't have the Admin assemblies loaded, and the two share no code by design
+///     (cross-app dependency avoidance). If one side drifts past the other on LDAP filter
+///     construction, DN resolution, or memberOf parsing, these tests surface it.
+/// </remarks>
+[Trait("Category", "LiveLdap")]
+public sealed class LdapUserAuthenticatorLiveTests
+{
+    private const string GlauthHost = "localhost";
+    private const int GlauthPort = 3893;
+
+    private static bool GlauthReachable()
+    {
+        try
+        {
+            using var client = new TcpClient();
+            var task = client.ConnectAsync(GlauthHost, GlauthPort);
+            return task.Wait(TimeSpan.FromSeconds(1)) && client.Connected;
+        }
+        catch { return false; }
+    }
+
+    // GLAuth dev directory groups are named identically to the OPC UA roles
+    // (ReadOnly / WriteOperate / WriteTune / WriteConfigure / AlarmAck), so the map is an
+    // identity translation. The authenticator still exercises every step of the pipeline —
+    // bind, memberOf lookup, group-name extraction, GroupToRole lookup — against real LDAP
+    // data; the identity map just means the assertion is phrased with no surprise rename
+    // in the middle.
+    private static LdapOptions GlauthOptions() => new()
+    {
+        Enabled = true,
+        Server = GlauthHost,
+        Port = GlauthPort,
+        UseTls = false,
+        AllowInsecureLdap = true,
+        SearchBase = "dc=lmxopcua,dc=local",
+        // Search-then-bind: service account resolves the user's full DN (cn=<user> lives
+        // under ou=<primary-group>,ou=users), the authenticator binds that DN with the
+        // user's password, then stays on the service-account session for memberOf lookup.
+        // Without this path, GLAuth ACLs block the authenticated user from reading their
+        // own entry in full — a plain self-search returns zero results and the role list
+        // ends up empty.
+        ServiceAccountDn = "cn=serviceaccount,dc=lmxopcua,dc=local",
+        ServiceAccountPassword = "serviceaccount123",
+        DisplayNameAttribute = "cn",
+        GroupAttribute = "memberOf",
+        UserNameAttribute = "cn", // GLAuth keys users by cn — see LdapOptions xml-doc.
+        GroupToRole = new(StringComparer.OrdinalIgnoreCase)
+        {
+            ["ReadOnly"] = "ReadOnly",
+            ["WriteOperate"] = WriteAuthzPolicy.RoleWriteOperate,
+            ["WriteTune"] = WriteAuthzPolicy.RoleWriteTune,
+            ["WriteConfigure"] = WriteAuthzPolicy.RoleWriteConfigure,
+            ["AlarmAck"] = "AlarmAck",
+        },
+    };
+
+    private static LdapUserAuthenticator NewAuthenticator() =>
+        new(GlauthOptions(), NullLogger<LdapUserAuthenticator>.Instance);
+
+    [Fact]
+    public async Task Valid_credentials_bind_and_return_success()
+    {
+        if (!GlauthReachable()) Assert.Skip("GLAuth unreachable at localhost:3893 — start the dev directory to run this test.");
+
+        var result = await NewAuthenticator().AuthenticateAsync("readonly", "readonly123", TestContext.Current.CancellationToken);
+
+        result.Success.ShouldBeTrue(result.Error);
+        result.DisplayName.ShouldNotBeNullOrEmpty();
+    }
+
+    [Fact]
+    public async Task Writeop_user_gets_WriteOperate_role_from_group_mapping()
+    {
+        // Drives end-to-end: bind as writeop, memberOf lists the WriteOperate group, the
+        // authenticator surfaces WriteOperate via GroupToRole. If this test fails,
+        // WriteAuthzPolicy.IsAllowed for an Operate-tier write would also fail
+        // (WriteOperate is the exact string the policy checks for), so the failure mode is
+        // concrete, not abstract.
+        if (!GlauthReachable()) Assert.Skip("GLAuth unreachable at localhost:3893 — start the dev directory to run this test.");
+
+        var result = await NewAuthenticator().AuthenticateAsync("writeop", "writeop123", TestContext.Current.CancellationToken);
+
+        result.Success.ShouldBeTrue(result.Error);
+        result.Roles.ShouldContain(WriteAuthzPolicy.RoleWriteOperate);
+    }
+
+    [Fact]
+    public async Task Admin_user_gets_multiple_roles_from_multiple_groups()
+    {
+        if (!GlauthReachable()) Assert.Skip("GLAuth unreachable at localhost:3893 — start the dev directory to run this test.");
+
+        // 'admin' has primarygroup=ReadOnly and othergroups=[WriteOperate, AlarmAck,
+        // WriteTune, WriteConfigure] per the GLAuth dev config — the authenticator must
+        // surface every mapped role, not just the primary group. Guards against a regression
+        // where the memberOf parsing stops after the first match or misses the primary-group
+        // fallback.
+        var result = await NewAuthenticator().AuthenticateAsync("admin", "admin123", TestContext.Current.CancellationToken);
+
+        result.Success.ShouldBeTrue(result.Error);
+        result.Roles.ShouldContain(WriteAuthzPolicy.RoleWriteOperate);
+        result.Roles.ShouldContain(WriteAuthzPolicy.RoleWriteTune);
+        result.Roles.ShouldContain(WriteAuthzPolicy.RoleWriteConfigure);
+        result.Roles.ShouldContain("AlarmAck");
+    }
+
+    [Fact]
+    public async Task Wrong_password_returns_failure()
+    {
+        if (!GlauthReachable()) Assert.Skip("GLAuth unreachable at localhost:3893 — start the dev directory to run this test.");
+
+        var result = await NewAuthenticator().AuthenticateAsync("readonly", "wrong-pw", TestContext.Current.CancellationToken);
+
+        result.Success.ShouldBeFalse();
+        result.Error.ShouldNotBeNullOrEmpty();
+    }
+
+    [Fact]
+    public async Task Unknown_user_returns_failure()
+    {
+        if (!GlauthReachable()) Assert.Skip("GLAuth unreachable at localhost:3893 — start the dev directory to run this test.");
+
+        var result = await NewAuthenticator().AuthenticateAsync("no-such-user-42", "whatever", TestContext.Current.CancellationToken);
+
+        result.Success.ShouldBeFalse();
+    }
+
+    [Fact]
+    public async Task Empty_credentials_fail_without_touching_the_directory()
+    {
+        // Pre-flight guard — doesn't require GLAuth.
+        var result = await NewAuthenticator().AuthenticateAsync("", "", TestContext.Current.CancellationToken);
+        result.Success.ShouldBeFalse();
+        result.Error.ShouldContain("Credentials", Case.Insensitive);
+    }
+}

tests/ZB.MOM.WW.OtOpcUa.Server.Tests/MultipleDriverInstancesIntegrationTests.cs

@@ -0,0 +1,191 @@
+using Microsoft.Extensions.Logging.Abstractions;
+using Opc.Ua;
+using Opc.Ua.Client;
+using Opc.Ua.Configuration;
+using Shouldly;
+using Xunit;
+using ZB.MOM.WW.OtOpcUa.Core.Abstractions;
+using ZB.MOM.WW.OtOpcUa.Core.Hosting;
+using ZB.MOM.WW.OtOpcUa.Server.OpcUa;
+using ZB.MOM.WW.OtOpcUa.Server.Security;
+
+namespace ZB.MOM.WW.OtOpcUa.Server.Tests;
+
+/// <summary>
+///     Closes LMX follow-up #6 — proves that two <see cref="IDriver"/> instances registered
+///     on the same <see cref="DriverHost"/> land in isolated namespaces and their reads
+///     route to the correct driver. The existing <see cref="OpcUaServerIntegrationTests"/>
+///     only exercises a single-driver topology; this sibling fixture registers two.
+/// </summary>
+/// <remarks>
+///     Each driver gets its own namespace URI of the form <c>urn:OtOpcUa:{DriverInstanceId}</c>
+///     (per <c>DriverNodeManager</c>'s base-class <c>namespaceUris</c> argument). A client
+///     that browses one namespace must see only that driver's subtree, and a read against a
+///     variable in one namespace must return that driver's value, not the other's — this is
+///     what stops a cross-driver routing regression from going unnoticed when the v1
+///     single-driver code path gets new knobs.
+/// </remarks>
+[Trait("Category", "Integration")]
+public sealed class MultipleDriverInstancesIntegrationTests : IAsyncLifetime
+{
+    private static readonly int Port = 48500 + Random.Shared.Next(0, 99);
+    private readonly string _endpoint = $"opc.tcp://localhost:{Port}/OtOpcUaMultiDriverTest";
+    private readonly string _pkiRoot = Path.Combine(Path.GetTempPath(), $"otopcua-multi-{Guid.NewGuid():N}");
+
+    private DriverHost _driverHost = null!;
+    private OpcUaApplicationHost _server = null!;
+
+    public async ValueTask InitializeAsync()
+    {
+        _driverHost = new DriverHost();
+        await _driverHost.RegisterAsync(new StubDriver("alpha", folderName: "AlphaFolder", readValue: 42),
+            "{}", CancellationToken.None);
+        await _driverHost.RegisterAsync(new StubDriver("beta", folderName: "BetaFolder", readValue: 99),
+            "{}", CancellationToken.None);
+
+        var options = new OpcUaServerOptions
+        {
+            EndpointUrl = _endpoint,
+            ApplicationName = "OtOpcUaMultiDriverTest",
+            ApplicationUri = "urn:OtOpcUa:Server:MultiDriverTest",
+            PkiStoreRoot = _pkiRoot,
+            AutoAcceptUntrustedClientCertificates = true,
+        };
+
+        _server = new OpcUaApplicationHost(options, _driverHost, new DenyAllUserAuthenticator(),
+            NullLoggerFactory.Instance, NullLogger<OpcUaApplicationHost>.Instance);
+        await _server.StartAsync(CancellationToken.None);
+    }
+
+    public async ValueTask DisposeAsync()
+    {
+        await _server.DisposeAsync();
+        await _driverHost.DisposeAsync();
+        try { Directory.Delete(_pkiRoot, recursive: true); } catch { /* best-effort */ }
+    }
+
+    [Fact]
+    public async Task Both_drivers_register_under_their_own_urn_namespace()
+    {
+        using var session = await OpenSessionAsync();
+
+        var alphaNs = session.NamespaceUris.GetIndex("urn:OtOpcUa:alpha");
+        var betaNs = session.NamespaceUris.GetIndex("urn:OtOpcUa:beta");
+
+        alphaNs.ShouldBeGreaterThanOrEqualTo(0, "DriverNodeManager for 'alpha' must register its namespace URI");
+        betaNs.ShouldBeGreaterThanOrEqualTo(0, "DriverNodeManager for 'beta' must register its namespace URI");
+        alphaNs.ShouldNotBe(betaNs, "each driver owns its own namespace");
+    }
+
+    [Fact]
+    public async Task Each_driver_subtree_exposes_only_its_own_folder()
+    {
+        using var session = await OpenSessionAsync();
+
+        var alphaNs = (ushort)session.NamespaceUris.GetIndex("urn:OtOpcUa:alpha");
+        var betaNs = (ushort)session.NamespaceUris.GetIndex("urn:OtOpcUa:beta");
+
+        var alphaRoot = new NodeId("alpha", alphaNs);
+        session.Browse(null, null, alphaRoot, 0, BrowseDirection.Forward, ReferenceTypeIds.HierarchicalReferences,
+            true, (uint)NodeClass.Object | (uint)NodeClass.Variable, out _, out var alphaRefs);
+        alphaRefs.ShouldContain(r => r.BrowseName.Name == "AlphaFolder",
+            "alpha's subtree must contain alpha's folder");
+        alphaRefs.ShouldNotContain(r => r.BrowseName.Name == "BetaFolder",
+            "alpha's subtree must NOT see beta's folder — cross-driver leak would hide subscription-routing bugs");
+
+        var betaRoot = new NodeId("beta", betaNs);
+        session.Browse(null, null, betaRoot, 0, BrowseDirection.Forward, ReferenceTypeIds.HierarchicalReferences,
+            true, (uint)NodeClass.Object | (uint)NodeClass.Variable, out _, out var betaRefs);
+        betaRefs.ShouldContain(r => r.BrowseName.Name == "BetaFolder");
+        betaRefs.ShouldNotContain(r => r.BrowseName.Name == "AlphaFolder");
+    }
+
+    [Fact]
+    public async Task Reads_route_to_the_correct_driver_by_namespace()
+    {
+        using var session = await OpenSessionAsync();
+
+        var alphaNs = (ushort)session.NamespaceUris.GetIndex("urn:OtOpcUa:alpha");
+        var betaNs = (ushort)session.NamespaceUris.GetIndex("urn:OtOpcUa:beta");
+
+        var alphaValue = session.ReadValue(new NodeId("AlphaFolder.Var1", alphaNs));
+        var betaValue = session.ReadValue(new NodeId("BetaFolder.Var1", betaNs));
+
+        alphaValue.Value.ShouldBe(42, "alpha driver's ReadAsync returns 42 — a misroute would surface as 99");
+        betaValue.Value.ShouldBe(99, "beta driver's ReadAsync returns 99 — a misroute would surface as 42");
+    }
+
+    private async Task<ISession> OpenSessionAsync()
+    {
+        var cfg = new ApplicationConfiguration
+        {
+            ApplicationName = "OtOpcUaMultiDriverTestClient",
+            ApplicationUri = "urn:OtOpcUa:MultiDriverTestClient",
+            ApplicationType = ApplicationType.Client,
+            SecurityConfiguration = new SecurityConfiguration
+            {
+                ApplicationCertificate = new CertificateIdentifier
+                {
+                    StoreType = CertificateStoreType.Directory,
+                    StorePath = Path.Combine(_pkiRoot, "client-own"),
+                    SubjectName = "CN=OtOpcUaMultiDriverTestClient",
+                },
+                TrustedIssuerCertificates = new CertificateTrustList { StoreType = CertificateStoreType.Directory, StorePath = Path.Combine(_pkiRoot, "client-issuers") },
+                TrustedPeerCertificates = new CertificateTrustList { StoreType = CertificateStoreType.Directory, StorePath = Path.Combine(_pkiRoot, "client-trusted") },
+                RejectedCertificateStore = new CertificateTrustList { StoreType = CertificateStoreType.Directory, StorePath = Path.Combine(_pkiRoot, "client-rejected") },
+                AutoAcceptUntrustedCertificates = true,
+                AddAppCertToTrustedStore = true,
+            },
+            TransportConfigurations = new TransportConfigurationCollection(),
+            TransportQuotas = new TransportQuotas { OperationTimeout = 15000 },
+            ClientConfiguration = new ClientConfiguration { DefaultSessionTimeout = 60000 },
+        };
+        await cfg.Validate(ApplicationType.Client);
+        cfg.CertificateValidator.CertificateValidation += (_, e) => e.Accept = true;
+
+        var instance = new ApplicationInstance { ApplicationConfiguration = cfg, ApplicationType = ApplicationType.Client };
+        await instance.CheckApplicationInstanceCertificate(true, CertificateFactory.DefaultKeySize);
+
+        var selected = CoreClientUtils.SelectEndpoint(cfg, _endpoint, useSecurity: false);
+        var endpointConfig = EndpointConfiguration.Create(cfg);
+        var configuredEndpoint = new ConfiguredEndpoint(null, selected, endpointConfig);
+
+        return await Session.Create(cfg, configuredEndpoint, false, "OtOpcUaMultiDriverTestClientSession", 60000,
+            new UserIdentity(new AnonymousIdentityToken()), null);
+    }
+
+    /// <summary>
+    ///     Driver stub that returns a caller-specified folder + variable + read value so two
+    ///     instances in the same server can be told apart at the assertion layer.
+    /// </summary>
+    private sealed class StubDriver(string driverInstanceId, string folderName, int readValue)
+        : IDriver, ITagDiscovery, IReadable
+    {
+        public string DriverInstanceId => driverInstanceId;
+        public string DriverType => "Stub";
+
+        public Task InitializeAsync(string driverConfigJson, CancellationToken ct) => Task.CompletedTask;
+        public Task ReinitializeAsync(string driverConfigJson, CancellationToken ct) => Task.CompletedTask;
+        public Task ShutdownAsync(CancellationToken ct) => Task.CompletedTask;
+        public DriverHealth GetHealth() => new(DriverState.Healthy, DateTime.UtcNow, null);
+        public long GetMemoryFootprint() => 0;
+        public Task FlushOptionalCachesAsync(CancellationToken ct) => Task.CompletedTask;
+
+        public Task DiscoverAsync(IAddressSpaceBuilder builder, CancellationToken ct)
+        {
+            var folder = builder.Folder(folderName, folderName);
+            folder.Variable("Var1", "Var1", new DriverAttributeInfo(
+                $"{folderName}.Var1", DriverDataType.Int32, false, null, SecurityClassification.FreeAccess, false, IsAlarm: false));
+            return Task.CompletedTask;
+        }
+
+        public Task<IReadOnlyList<DataValueSnapshot>> ReadAsync(
+            IReadOnlyList<string> fullReferences, CancellationToken cancellationToken)
+        {
+            var now = DateTime.UtcNow;
+            IReadOnlyList<DataValueSnapshot> result =
+                fullReferences.Select(_ => new DataValueSnapshot(readValue, 0u, now, now)).ToArray();
+            return Task.FromResult(result);
+        }
+    }
+}