Block a user
Phase 2 PR 61 -- Close V1_ARCHIVE_STATUS.md: Streams D + E done
Phase 2 PR 61 -- Close V1_ARCHIVE_STATUS.md: Streams D + E done
dohertj2
created branch phase-2-pr61-scrub-v1-archive-residue in dohertj2/lmxopcua
2026-04-18 23:22:33 -04:00
dohertj2
pushed to phase-2-pr61-scrub-v1-archive-residue at dohertj2/lmxopcua
2026-04-18 23:22:33 -04:00
56d8af8bdb
Phase 2 PR 61 -- Close V1_ARCHIVE_STATUS.md; Phase 2 Streams D + E done. Purely a documentation-closure PR. The v1 archive deletion itself happened across earlier PRs: PR 2 on phase-2-stream-d archive-marked the four v1 projects (IsTestProject=false so dotnet test slnx bypassed them); Phase 3 PR 18 deleted the archived project source trees. What remained on disk was stale bin/obj residue from pre-deletion builds -- git never tracked those, so removing them from the working tree is cosmetic only (no source-file diff in this PR). What this PR actually changes: V1_ARCHIVE_STATUS.md is rewritten from 'Deletion plan (Phase 2 PR 3)' pre-work prose to a CLOSED retrospective that (a) lists all five v1 directories as deleted with check-marks (src/OtOpcUa.Host, src/Historian.Aveva, tests/Historian.Aveva.Tests, tests/Tests.v1Archive, tests/IntegrationTests), (b) names the parity-bar tests that now fill the role the 494 v1 tests originally held (Driver.Galaxy.E2E cross-FX subprocess parity + stability-findings regression, per-component *.Tests projects, Driver.Modbus.IntegrationTests, LiveStack/ smoke tests), and (c) gives the closure timeline connecting PR 2 -> Phase 3 PR 18 -> this PR 61. Also added the Modbus TCP driver family as parity coverage that didn't exist in v1 (DL205 + S7-1500 + Mitsubishi MELSEC via pymodbus sim). Stream D (retire legacy Host) has been effectively done since Phase 3 PR 18; Stream E (parity validation) is done since PR 2 landed the Driver.Galaxy.E2E project with HostSubprocessParityTests + HierarchyParityTests + StabilityFindingsRegressionTests. This PR exists to definitively close the two pending Phase 2 tasks on the task list and give future-me (or anyone picking up Phase 2 retrospectives) a single 'what actually happened' doc instead of a 'what we plan to do' prose that didn't match reality. dotnet build ZB.MOM.WW.OtOpcUa.slnx: 0 errors, 200 warnings (all xunit1051 cancellation-token analyzer advisories, unchanged from v2 tip). No test regressions -- no source code changed.
be8261a4ac
Merge pull request 'Phase 3 PR 60 -- Mitsubishi MELSEC quirk integration tests' (#59) from phase-3-pr60-mitsubishi-quirk-tests into v2
a44fc7a610
Phase 3 PR 60 -- Mitsubishi MELSEC quirk integration tests against mitsubishi pymodbus profile. Seven facts in MitsubishiQuirkTests covering the quirks documented in docs/v2/mitsubishi.md that are testable end-to-end via pymodbus: (1) Mitsubishi_D0_fingerprint_reads_0x1234 -- MELSEC operators reserve D0 as a fingerprint word so Modbus clients can verify they're hitting the right Device Assignment block; test reads HR[0]=0x1234 via DRegisterToHolding('D0') helper. (2) Mitsubishi_Float32_CDAB_decodes_1_5f_from_D100 -- reads HR[100..101] with WordSwap AND BigEndian; asserts WordSwap==1.5f AND BigEndian!=1.5f, proving (a) MELSEC uses CDAB default same as DL260, (b) opposite of S7 ABCD, (c) driver flag is not a no-op. (3) Mitsubishi_D10_is_binary_not_BCD -- reads HR[10]=0x04D2 as Int16 and asserts value 1234 (binary decode), contrasting with DL205's BCD-by-default convention. (4) Mitsubishi_D10_as_BCD_throws_because_nibble_is_non_decimal -- reads same HR[10] as Bcd16 and asserts StatusCode != 0 because nibble 0xD fails BCD validation; proves the BCD decoder fails loud when the tag config is wrong rather than silently returning garbage. (5) Mitsubishi_QLiQR_X210_hex_maps_to_DI_528_reads_ON -- reads FC02 at the MelsecAddress.XInputToDiscrete('X210', Q_L_iQR)-resolved address (=528 decimal) and asserts ON; proves the hex-parsing path end-to-end. (6) Mitsubishi_family_trap_X20_differs_on_Q_vs_FX -- unit-level proof in the integration file so the headline family trap is visible to anyone filtering by Device=Mitsubishi. (7) Mitsubishi_M512_maps_to_coil_512_reads_ON -- reads FC01 at MRelayToCoil('M512')=512 (decimal) and asserts ON; proves the decimal M-relay path. Test fixture pattern: single MitsubishiQuirkTests class with a shared ShouldRun + NewDriverAsync helper rather than per-quirk classes (contrast with DL205's per-quirk splits). MELSEC per-model differentiation is handled by MelsecFamily enum on the helper rather than per-PR -- so one quirk file + one family enum covers Q/L/iQ-R/FX/iQ-F, and a new PLC family just adds an enum case instead of a new test class. 8/8 Mitsubishi integration tests pass (1 smoke + 7 quirk). 176/176 Modbus.Tests unit suite still green. S7 + DL205 integration tests can be run against their respective profiles by swapping MODBUS_SIM_PROFILE and restarting the pymodbus sim -- each family gates on its profile env var so no cross-family test pollution.
Phase 3 PR 60 -- Mitsubishi MELSEC quirk integration tests
Phase 3 PR 60 -- Mitsubishi MELSEC quirk integration tests
65de2b4a09
Merge pull request 'Phase 3 PR 59 -- MelsecAddress helper with family selector (hex vs octal X/Y)' (#58) from phase-3-pr59-melsec-address-helper into v2
d4c1873998
Phase 3 PR 59 -- MelsecAddress helper for MELSEC X/Y hex-vs-octal family trap + D/M bank bases. Adds MelsecAddress static class with XInputToDiscrete, YOutputToCoil, MRelayToCoil, DRegisterToHolding helpers and a MelsecFamily enum {Q_L_iQR, F_iQF} that drives whether X/Y addresses are parsed as hex (Q-series convention) or octal (FX-series convention). This is the #1 MELSEC driver bug source per docs/v2/mitsubishi.md: the string 'X20' on a MELSEC-Q means DI 32 (hex 0x20) while the same string on an FX3U means DI 16 (octal 0o20). The helper forces the caller to name the family explicitly; no 'sensible default' because wrong defaults just move the bug. Key design decisions: (1) Family is an enum argument, not a helper-level static-selector, because real deployments have BOTH Q-series and FX-series PLCs on the same gateway -- one driver instance per device means family must be per-tag, not per-driver. (2) Bank base is a ushort argument defaulting to 0. Real QJ71MT91/LJ71MT91 assignment blocks commonly place X at DI 8192+, Y at coil 8192+, etc. to leave the low-address range for D-registers; the helper takes the site's configured base as runtime config rather than a compile-time constant. Matches the 'driver opt-in per tag' pattern DirectLogicAddress established for DL260. (3) M-relay and D-register are DECIMAL on every MELSEC family -- docs explicitly; the MELSEC confusion is only about X/Y, not about data registers or internal relays. Helpers reject non-numeric M/D addresses and honor bank bases the same way. (4) Parser walks digits manually for both hex and octal (instead of int.Parse with NumberStyles) so non-hex / non-octal characters give a clear ArgumentException with the offending char + family name. Prevents a subtle class of bugs where int.Parse('X20', Hex) silently returns 32 even for F_iQF callers. Unit tests (MelsecAddressTests, 34 facts): XInputToDiscrete_QLiQR_parses_hex theory (X0, X9, XA, XF, X10, X20, X1FF + lowercase); XInputToDiscrete_FiQF_parses_octal theory (X0, X7, X10, X20, X777); YOutputToCoil equivalents; Same_address_string_decodes_differently_between_families (the headline trap, X20 => 32 on Q vs 16 on FX); reject-non-octal / reject-non-hex / reject-empty / overflow facts; honors-bank-base for X and M and D. 176/176 Modbus.Tests pass (143 prior + 34 new Melsec). No driver core changes -- this is purely a new helper class in the Driver.Modbus project. PR 60 wires it into integration tests against the mitsubishi pymodbus profile.
Phase 3 PR 59 -- MelsecAddress helper with family selector (hex vs octal X/Y)
Phase 3 PR 59 -- MelsecAddress helper with family selector (hex vs octal X/Y)
fccb566a30
Merge pull request 'Phase 3 PR 58 -- Mitsubishi MELSEC pymodbus profile + smoke' (#57) from phase-3-pr58-mitsubishi-sim-profile into v2
f52b7d8979
Phase 3 PR 58 -- Mitsubishi MELSEC pymodbus profile + smoke integration test. Adds tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/Pymodbus/mitsubishi.json modelling a representative MELSEC Modbus Device Assignment block: D0..D1023 -> HR[0..1023], M-relay marker at coil 512 (cell 32) and X-input marker at DI 528 (cell 33). Covers the canonical MELSEC quirks from docs/v2/mitsubishi.md: D0 fingerprint at HR[0]=0x1234 so clients can verify the assignment parameter block is in effect, scratch HR 200..209 mirroring dl205/s7_1500/standard scratch range for uniform smoke tests, Float32 1.5f at HR[100..101] in CDAB word order (HR[100]=0, HR[101]=0x3FC0) -- same as DL260, OPPOSITE of S7 ABCD, confirms MELSEC-family driver profile default must be ByteOrder.WordSwap. Int32 0x12345678 CDAB at HR[300..301]. D10 = binary 1234 (0x04D2) proves MELSEC is BINARY-by-default (opposite of DL205 BCD-by-default quirk) -- reading D10 with Bcd16 data type would throw InvalidDataException on nibble 0xD. M-relay marker cell moved to address 32 (coil 512) to avoid shared-block collision with D0 uint16 marker at cell 0; pymodbus shared-blocks=true semantics allow only one type per cell index, so Modbus-coil-0 can't coexist with Modbus-HR-0 on the same sim. Same pattern we applied to dl205 profile (X-input bank at cell 1, not cell 0, to coexist with V0 marker). Adds Mitsubishi/ test directory with MitsubishiProfile.cs (SmokeHoldingRegister=200, SmokeHoldingValue=7890, BuildOptions with probe-disabled + 2s timeout) and MitsubishiSmokeTests.cs (Mitsubishi_roundtrip_write_then_read_of_holding_register single fact that writes 7890 at HR[200] then reads back, gated on MODBUS_SIM_PROFILE=mitsubishi). csproj copies Mitsubishi/** as PreserveNewest. Per-model differences (FX5U firmware gate, QJ71MT91 FC22/23 absence, FX/iQ-F octal vs Q/L/iQ-R hex X-addressing) are handled in the MelsecAddress helper (PR 59) + per-model test classes (PR 60). Verified: smoke 1/1 passes against live mitsubishi sim. Prior S7 tests 4/4 still green when swapped back. Modbus.Tests unit suite 143/143.
Phase 3 PR 58 -- Mitsubishi MELSEC pymodbus profile + smoke
Phase 3 PR 58 -- Mitsubishi MELSEC pymodbus profile + smoke
9ccc7338b8
Merge pull request 'Phase 3 PR 57 -- S7 byte-order + fingerprint integration tests' (#56) from phase-3-pr57-s7-quirk-tests into v2
b54724a812
Phase 3 PR 57 -- S7 byte-order + fingerprint integration tests against s7_1500 pymodbus profile. Three facts in new S7_ByteOrderTests class: (1) S7_Float32_ABCD_decodes_1_5f_from_HR100 reads HR[100..101] with ModbusByteOrder.BigEndian AND with WordSwap on the same wire bytes; asserts BigEndian==1.5f AND WordSwap!=1.5f -- proving both that Siemens S7 stores Float32 in ABCD word order (opposite of DL260 CDAB) and that the ByteOrder flag is not a no-op on the same wire buffer. (2) S7_Int32_ABCD_decodes_0x12345678_from_HR300 reads HR[300]=0x1234 + HR[301]=0x5678 with BigEndian and asserts the reassembled Int32 = 0x12345678; documents the contrast with DL260 CDAB Int32 encoding. (3) S7_DB1_fingerprint_marker_at_HR0_reads_0xABCD reads HR[0]=0xABCD -- real MB_SERVER deployments reserve DB1.DBW0 as a fingerprint so clients can verify they're pointing at the right DB, protecting against typos in the MB_SERVER.MB_HOLD_REG.DB_number parameter. No driver code changes -- the ByteOrder.BigEndian path has existed since PR 24; this PR exists to lock in the S7-specific semantics at the integration level so future refactors of NormalizeWordOrder can't silently break S7. All 3 tests gate on MODBUS_SIM_PROFILE=s7_1500 so they skip cleanly against dl205 or standard profiles. Verified end-to-end: 4/4 S7 integration tests pass (1 smoke from PR 56 + 3 new). No regression in driver unit tests. Per the per-quirk-PR plan: the S7 quirks NOT testable via pymodbus sim (MB_SERVER STATUS 0x8383 optimized-DB behavior, port-per-connection semantics, CP 343-1 Lean license rejection, STOP-mode non-determinism) remain in docs/v2/s7.md as design guidance for driver users rather than automated tests -- they're TIA-Portal-side or CP-hardware-side behaviors that pymodbus cannot reproduce without custom Python actions.
Phase 3 PR 57 -- S7 byte-order + fingerprint integration tests
Phase 3 PR 57 -- S7 byte-order + fingerprint integration tests
e33783e042
Merge pull request 'Phase 3 PR 56 -- Siemens S7-1500 pymodbus profile + smoke' (#55) from phase-3-pr56-s7-sim-profile into v2
10c724b5b6
Phase 3 PR 56 -- Siemens S7-1500 pymodbus profile + smoke integration test. Adds tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/Pymodbus/s7_1500.json modelling the SIMATIC S7-1500 + MB_SERVER default deployment documented in docs/v2/s7.md: DB1.DBW0 = 0xABCD fingerprint marker (operators reserve this so clients can verify they're talking to the right DB), scratch HR range 200..209 for write-roundtrip tests mirroring dl205.json + standard.json, Float32 1.5f at HR[100..101] in ABCD word order (high word first -- OPPOSITE of DL260 CDAB), Int32 0x12345678 at HR[300..301] in ABCD. Also seeds a coil at bit-addr 400 (= cell 25 bit 0) and a discrete input at bit-addr 500 (= cell 31 bit 0) so future S7-specific tests for FC01/FC02 have stable markers. shared blocks=true to match the proven dl205.json pattern (pymodbus's bits/uint16 cells coexist cleanly when addresses don't collide). Write list references cells (0, 25, 100-101, 200-209, 300-301), not bit addresses -- pymodbus's write-range entries are cell-indexed, not bit-indexed. Adds tests/ZB.MOM.WW.OtOpcUa.Driver.Modbus.IntegrationTests/S7/ directory with S7_1500Profile.cs (mirrors DL205Profile pattern: SmokeHoldingRegister=200, SmokeHoldingValue=4321, BuildOptions tags + probe-disabled + 2s timeout) and S7_1500SmokeTests.cs (single fact S7_1500_roundtrip_write_then_read_of_holding_register that writes SmokeHoldingValue then reads it back, asserting both write status 0 and read status 0 + value equality). Gates on MODBUS_SIM_PROFILE=s7_1500 so the test skips cleanly against other profiles. csproj updated to copy S7/** to test output as PreserveNewest (pattern matching DL205/**). Pymodbus/serve.ps1 ValidateSet extended from {standard,dl205} to {standard,dl205,s7_1500,mitsubishi} -- mitsubishi.json lands in PR 58 but the validator slot is claimed now so the serve.ps1 diff is one line in this PR and zero lines in future PRs. Verified end-to-end: smoke test 1/1 passes against the running pymodbus s7_1500 profile (localhost:5020 FC06 write of 4321 at HR[200] + FC03 read back). 143/143 Modbus.Tests pass, no regression in driver code because this PR is purely test-asset. Per-quirk S7 integration tests (ABCD word order default, FC23 IllegalFunction, MB_SERVER STATUS 0x8383 behaviour, port-per-connection semantics) land in PR 57+.
Phase 3 PR 56 -- Siemens S7-1500 pymodbus profile + smoke
Phase 3 PR 56 -- Siemens S7-1500 pymodbus profile + smoke
dohertj2
pushed to phase-3-pr60-mitsubishi-quirk-tests at dohertj2/lmxopcua
2026-04-18 23:08:54 -04:00
a44fc7a610
Phase 3 PR 60 -- Mitsubishi MELSEC quirk integration tests against mitsubishi pymodbus profile. Seven facts in MitsubishiQuirkTests covering the quirks documented in docs/v2/mitsubishi.md that are testable end-to-end via pymodbus: (1) Mitsubishi_D0_fingerprint_reads_0x1234 -- MELSEC operators reserve D0 as a fingerprint word so Modbus clients can verify they're hitting the right Device Assignment block; test reads HR[0]=0x1234 via DRegisterToHolding('D0') helper. (2) Mitsubishi_Float32_CDAB_decodes_1_5f_from_D100 -- reads HR[100..101] with WordSwap AND BigEndian; asserts WordSwap==1.5f AND BigEndian!=1.5f, proving (a) MELSEC uses CDAB default same as DL260, (b) opposite of S7 ABCD, (c) driver flag is not a no-op. (3) Mitsubishi_D10_is_binary_not_BCD -- reads HR[10]=0x04D2 as Int16 and asserts value 1234 (binary decode), contrasting with DL205's BCD-by-default convention. (4) Mitsubishi_D10_as_BCD_throws_because_nibble_is_non_decimal -- reads same HR[10] as Bcd16 and asserts StatusCode != 0 because nibble 0xD fails BCD validation; proves the BCD decoder fails loud when the tag config is wrong rather than silently returning garbage. (5) Mitsubishi_QLiQR_X210_hex_maps_to_DI_528_reads_ON -- reads FC02 at the MelsecAddress.XInputToDiscrete('X210', Q_L_iQR)-resolved address (=528 decimal) and asserts ON; proves the hex-parsing path end-to-end. (6) Mitsubishi_family_trap_X20_differs_on_Q_vs_FX -- unit-level proof in the integration file so the headline family trap is visible to anyone filtering by Device=Mitsubishi. (7) Mitsubishi_M512_maps_to_coil_512_reads_ON -- reads FC01 at MRelayToCoil('M512')=512 (decimal) and asserts ON; proves the decimal M-relay path. Test fixture pattern: single MitsubishiQuirkTests class with a shared ShouldRun + NewDriverAsync helper rather than per-quirk classes (contrast with DL205's per-quirk splits). MELSEC per-model differentiation is handled by MelsecFamily enum on the helper rather than per-PR -- so one quirk file + one family enum covers Q/L/iQ-R/FX/iQ-F, and a new PLC family just adds an enum case instead of a new test class. 8/8 Mitsubishi integration tests pass (1 smoke + 7 quirk). 176/176 Modbus.Tests unit suite still green. S7 + DL205 integration tests can be run against their respective profiles by swapping MODBUS_SIM_PROFILE and restarting the pymodbus sim -- each family gates on its profile env var so no cross-family test pollution.