F1: the driver's outage BadNoCommunication carried the last Good sample's
source timestamp. The recorder historizes SourceTimestampUtc ??
ServerTimestampUtc, so the Bad landed on the Good row's (TagId,
SourceTimeUtc) key and the insert-if-absent historian dropped it - no
outage marker until the host's watchdog marker ~95 s in, none at all for
a short blip. Now stamped with the detection time (source + server), as
the host's comms-loss fan does.
F2: after a same-session recovery the SDK delivered a missed notification
seconds late with an older source time and the node regressed. A
notification older than the newest Good upstream source time for its ref
(notification or recovery read) is dropped and counted
(stale_notification_dropped); equal timestamps pass; the outage Bad never
moves the comparison; a re-initialise resets it.
M1: a subscription that dies while the session lives (outage longer than
the subscription lifetime but shorter than the session timeout) used to
end Healthy with fresh keep-alive stamps and frozen values. PublishError
BadNoSubscription / BadSubscriptionIdInvalid naming a tracked
subscription, or a tracked subscription whose SDK PublishingStopped
persists one more keep-alive window + 5 s across good keep-alives, now
declares it lost: Degraded, outage published once, and nothing advances
LastSuccessfulRead until the session is released, so the #527 watchdog
re-initialises and re-subscribes. Both detectors wire-tested.
M2: in-place recovery is bound to the session whose keep-alive recovered;
one overtaken by a re-initialise no longer re-arms the new session's
outage latch or degrades its health (ReadCoreAsync expectedSession).
L1 CAS health updates; L2 re-check before each recovery publish; L3 skip
CloseSession on a lost session; L4 SDK log forwarding rate-limited
(20/min); L5 per-driver SDK LoggerFactory disposed with the driver.
Wire test asserts the read stamp stays frozen while the server is down.
A bad keep-alive now degrades health (LastSuccessfulRead preserved) and,
once per outage, publishes BadNoCommunication (value retained) for every
subscribed ref plus a quality-only annotation on subscribed alarm
conditions. Good keep-alives and data/event notifications advance
LastSuccessfulRead, so an idle-but-alive subscription never looks dead
to the #527 watchdog. A keep-alive that recovers on the same session
re-reads the Bad refs and republishes them Good; a session that does not
come back is recovered by the watchdog's ShutdownAsync + InitializeAsync
+ re-subscribe.
Deletes the SessionReconnectHandler wiring (it retried forever in SDK
1.5.378, cloned subscriptions the driver never re-tracked and kept health
Healthy), OnReconnectComplete, TryRearmReconnect and the reconnect_*
counters (new keepalive_recovered). Teardown of a lost session skips
wire deletes and bounds CloseSession. SDK warnings reach the driver log.
Wire test reworked: restart => Bad, then watchdog-style reinit => Good.
- I-1: QuestDbConnection caps Npgsql Maximum Pool Size at 24 (DefaultMaxPoolSize)
when the connection string does not set it; an explicit value is kept. The
effective value is logged once at Information.
- M-1: QuestDbTagCatalog.EnsureAsync waits for the tag table's sequenced commits
and re-checks before inserting, so it no longer overwrites a provisioner row
(unit/description) that is committed but not yet applied. Integration test
reproduces the clobber against real QuestDB (falsified).
- M-3: the pre-1970 drop Warning is rate-limited per tag (once per 10 min);
DroppedPre1970 still counts every sample.
- M-5: QuestDbHistorianProvider is IAsyncDisposable/IDisposable and disposes the
shared Npgsql pool; Program.cs registers the provider through a factory and
every seam resolves it from the container, so DI disposes it at shutdown.
- M-8, M-9: docs fixes (HistoryUpdate transaction wording; folded duplicate
HistoryUpdate paragraph). Pool-size docs updated for the new default cap.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
AtTime conformance stamps are the requested time (M3; identical on SQL Server). The
QuestDB test fixture prunes idle pooled connections after 1 s: undisposed per-test data
sources exhausted QuestDB's 64-connection PG-wire limit in a full run.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
IHistorianDataSource.TimestampResolutionTicks (default 1; QuestDB 10). A drained tie
cluster now steps off T by the resolution, so a forward one-value-per-page read on a
microsecond backend no longer re-reads the same sample forever (C1). QuestDB AtTime
results carry the client's original request time (M3); regression for the NEXT seek
skipping a tombstone (M1). Conformance backend wires the real writer and updater.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
QuestDbHistorianDataSource serves Raw (LIMIT $n, no continuation, R8), AtTime
(chunked LIMIT 1 neighbour seeks, <=50 times per statement), Events and
Processed (one statement per node, bucket = (cast(ts AS LONG)*10 - start)/interval,
shared BucketPlan/AggregateEvaluator/AtTimeEvaluator). Every sample read filters
NOT deleted; every row goes through StoredSample.FromStored; RC2 long.MinValue
read repair. QuestDbConformanceBackend (seed/read-back) for the conformance suite;
writer/updater factories are T7 placeholders.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
Two Sql.Common tests close review finding I-1: an Uncertain NEXT neighbour makes an AtTime
interpolation Uncertain, and an Uncertain (non-Bad) sample in a bucket makes the aggregate
Uncertain. Each falsified with the reviewer's surviving mutation.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
51 new test cases (34 methods) in Sql.Common.Tests covering AtTimeEvaluator, AggregateEvaluator
(hand-built tag-A bucket rows, ProcessedRead literals), BucketPlan, LiveWritePreparer and
HistoryUpdatePlanner (incl. resolutionTicks=10 truncate-before-dedup and the superseded-duplicate
outcome), plus EventContinuation, HistorianHealthCounters, ClampSeverity and StoredSample.FromStored.
Each was falsified by reverting the rule it pins (37 mutations, all red, all restored).
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
Moves the database-independent logic of the SQL Server historian backend into a new
shared library for the upcoming QuestDB backend (#666): status codes and bits, value/column
mapping, StoredSample + quality clamp, the AtTime and aggregate evaluators, BucketPlan,
LiveWritePreparer and HistoryUpdatePlanner (both with a resolutionTicks parameter, default 1),
tag-name rules, the bootstrap failure cache, health counters, alarm event ids, the event
continuation and severity clamp. The SQL Server backend now calls it; its T-SQL, TVP
builders, connection, bootstrapper and catalog stay.
Tests: StatusCodeOracleTests, ValueWriterPrepareTests, the column half of SampleRowMapperTests
and ProcessedReadTests.Every_enum_member_is_either_served_or_refused move to the new
Sql.Common.Tests under the same names. SqlServer integration tests get mechanical renames
only. Test-name set across the three projects is identical to the baseline (160 tests).
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
- Historian.md: Empty samples always Bad (writer/updater/read clamp),
long-name refusal, 5 s bootstrap failure cache, AtTime after now, info-bit
masking, HistoryUpdate does NOT type-check (M-1 decision), DeleteRaw
needs both bounds, reverse Raw paging, the historian/historization metric
prefixes, and provisioning numeric-only lines qualified as Gateway.
- CLAUDE.md numeric-only lines qualified as Gateway backend.
- Stale 'sole historian' lines in DriverLifecycle, ServiceHosting and the
retired Wonderware stub; Client.CLI exit-code contract.
- ServerHistorianOptions: Endpoint/Backend XML docs untangled, Validate()
indented; Program.cs comments are backend-neutral; T10 week-test day count.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
- I-1: an Empty sample is always Bad. The writer stores a non-Bad NaN/Inf as
Empty+BadOutOfRange and any other non-Bad Empty as BadNoData; the updater
refuses a non-Bad Empty with BadInvalidArgument; reads clamp a legacy
non-Bad Empty row to BadNoData (Raw and AtTime).
- Tag/source names over 400 chars are refused, never truncated: writer
per-tag failure, updater BadInvalidArgument, reads not-found, events none.
- HistorianInfoBits masks the historian bits before setting one.
- AtTime past now, stepped from the last sample => UncertainDataSubNormal.
- Bootstrapper: logger, 5 s negative cache, ClearPool + Warning when
sp_releaseapplock fails.
- Provider builds its shared state lazily (an invalid Schema no longer
throws at Resolve); Kinds is a FrozenSet; Gateway reuses the recorder's
DefaultSupportedKinds.
- Cleanup: SqlHistorianDataTypes in its own file (updater dup removed),
dead Invalidate and unused status consts deleted, named severity masks,
alarm writer brace.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
Important 1: bucket offsets are now 100 ns ticks as bigint
(DATEDIFF_BIG(microsecond)*10 plus the sub-microsecond tick digits), so a
1601→9999 window no longer overflows (SQL 535) and nothing scales the interval
to nanoseconds in C#. Interval wider than the window clamps to one bucket and
the ceiling division cannot overflow. Exactness to the tick is unchanged.
Important 2 (spec §4 ruling d6afb394): a Bad previous neighbour means the time
is inside an outage — null value with that neighbour's Bad code, never
Uncertain. Usable previous + Bad next still holds the previous value Uncertain.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
SqlServerHistorianDataSource implements IHistorianDataSource over the T8 schema:
raw forward/reverse/point with the 0 = unbounded sentinel; AtTime in one statement
(TimeRow TVP + two OUTER APPLYs) with linear/stepped/no-prior rules and no
interpolation across a Bad neighbour or Empty outage marker; events with a
maxEvents+1 truncation probe and a non-null continuation point; processed
aggregates pushed down to T-SQL (SqlAggregateQueries) with nanosecond-exact
bucket edges, Calculated bits on every result, Uncertain on any non-Good input,
BadAggregateInvalidInputs for numeric aggregates over String/DateTime, a
100 000-bucket cap and HistoryAggregateNotSupportedException for the rest.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
Serialize always writes v2 ("HV2\0" | ver 2 | id | tag | kind | payload | status u32 | ts).
TryDeserialize reads v2 by magic, falls back to the legacy exact-length layout (also when the
magic matches but v2 validation fails), else returns false - never throws.
FasterLogHistorizationOutbox: RecoverState and PeekBatchAsync both use TryDeserialize. An
unreadable record is indexed under a synthetic id (FIFO truncation passes it), skipped by peek,
counted once (UnreadableCount), and dropped by peek once it reaches the head so it can never
pin the outbox.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
Since #516 a DriverConfig change is stop + respawn, so DriverSpawnPlan.ToApplyDelta
was always empty and the in-place path had no producer. #663 and #664 were both
latent bugs in it. This deletes it:
- host: ApplyChildDelta, _pendingDelta, HandleApplyResult and HandleDeltaApplied
- plan: DriverSpawnPlan.ToApplyDelta
- actor: the ApplyDelta, ApplyResult and DeltaApplied messages, the Connected
reinit handler and the mid-connect AdoptConfigDuringInit
- tests: the actor tests that drove the seam
IDriver.ReinitializeAsync and each driver's implementation and unit tests stay.
Comments and docs that cited AdoptConfigDuringInit as the reason a driver must
release prior state at init now cite the IDriver contract and overlapping
retries, which still apply.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
AdoptConfigDuringInit re-runs InitializeAsync(newConfig) and acks success, but
Calculation and Galaxy ignored the JSON there: Calculation kept its old tag
set, and Galaxy connected on its old endpoint. Calculation now rebuilds its tag
table from a config with a body (sharing AdoptConfig with ReinitializeAsync and
stopping any running timer scheduler first). Galaxy, which cannot hot-swap its
options, refuses a non-equivalent one the way ReinitializeAsync does. The actor
now sends DeltaApplied once the adopted init succeeds, so a dependency
consumer's mux interest is re-registered. Unreachable from deploys since #516.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
Joseph Doherty