8b10d327281e4e3dfdffb687439b02f71cb7015c
189 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Joseph Doherty
|
9420f8efff |
Merge fix/issue-546-panel: wire DriverStatusPanel into /hosts driver rows (#546)
Claude-Session: https://claude.ai/code/session_014WNM4vjoVksyyBraTXSZE1 |
||
|
Joseph Doherty
|
f1c188114b |
refactor(fleet): #542 delete the dead fleet-status chain (broadcaster, SignalR bridge, hub, messages)
#542 filed FleetStatusBroadcaster as blind to site nodes since the Phase 6 per-cluster mesh split: it derives "the fleet" from central's own Akka gossip ring, which after the split is just central's own pair. Scoping the cross-mesh rewrite found the deeper truth — the whole chain is dead end to end, so this deletes it rather than reviving it. - Zero consumers. FleetStatusBroadcaster published FleetStatusChanged on the DPS "fleet-status" topic; FleetStatusSignalRBridge forwarded it to FleetStatusHub ("/hubs/fleet-status"); nothing anywhere connected. The AdminUI bans self-connecting HubConnections, no browser JS subscribes, and /fleet (Fleet.razor) reads NodeDeploymentState from the ConfigDb plus IClusterRoleInfo on a 5 s poll instead. - Its second input never existed. DriverHostStatusHeartbeat had no production sender — only the broadcaster's own test told it — so CurrentRevision was always null and the 30 s staleness -> Degraded flip could never fire. - Post-Phase-6 DPS is pair-local, so even the central-only view it did produce was an accident of topology rather than a design. The fleet visibility that actually works is unchanged and already cross-mesh-correct: /fleet over NodeDeploymentState, and the four Phase 5 per-node telemetry dials. Precedent for deleting inert machinery rather than activating it: #522 (driver stability tiers), #507 (discovered-node injection), #525 (GetMemoryFootprint). Deleted: FleetStatusBroadcaster (+ its nested DriverHostStatusHeartbeat), its admin singleton registration and FleetStatusBroadcasterKey, FleetStatusSignalRBridge and its key, FleetStatusHub and its route mapping, and the FleetStatusChanged / FleetNodeStatus / FleetNodeHealth messages. Both Fleet/ directories survive — ControlPlane keeps ClusterNodeAddressReconciler, Commons keeps GetDiagnostics. Docs swept where they claimed a fleet-status channel exists (Telemetry.md's Phase 5 non-migrated channels, Configuration.md, CLAUDE.md); completed-program plan docs under docs/plans and docs/v2 are left as the historical record they are. Build 0 errors, 868 warnings — byte-identical to master's rebuild baseline. ControlPlane.Tests 231/231, AdminUI.Tests 1109/1109. Claude-Session: https://claude.ai/code/session_014WNM4vjoVksyyBraTXSZE1 |
||
|
Joseph Doherty
|
d33e4e20b5 |
feat(adminui): #546 wire DriverStatusPanel into /hosts driver rows (collapsed expander)
DriverStatusPanel was orphaned — zero references repo-wide — so the Restart and Reconnect driver commands had NO reachable UI at all, despite working end to end over the new gRPC mesh transport. Nothing failed to build, test or deploy while that was true, which is why it went unnoticed. The panel is now reachable per driver row on /hosts, behind a per-row "Controls" expander that is collapsed by default: the table stays scannable, and only the opened panels hold snapshot-store subscriptions. Expansion state is a HashSet keyed by DriverInstanceId held on the page, so it survives the 5 s refresh that replaces every row record. Both rows are @key'd by instance id so the panel — which binds its DriverInstanceId once in OnInitializedAsync — can never be diffed onto a different driver. The panel's Enabled parameter is fed from real config rather than defaulted: HostsDriverInstanceInfo/HostsDriverRow now carry DriverInstance.Enabled, which LoadConfigAsync already had in hand. A snapshot with no matching configured instance is treated as enabled — the row exists only because live health arrived, so "Disabled — not deployed" would contradict the same row. The expander is visible to every AuthenticatedRead viewer; the panel self-gates only its Reconnect/Restart buttons on DriverOperator. A source-scan pin (HostsPanelWiringTests) asserts /hosts still renders the panel and still binds it to the row's own driver, cluster and enabled state — removing the tag would silently restore the orphaned state. Claude-Session: https://claude.ai/code/session_014WNM4vjoVksyyBraTXSZE1 |
||
|
Joseph Doherty
|
4d2dfb5b50 |
test(mesh): step 7 — replace the boundary test with MeshGrpcBoundaryTests and sweep the comments
MeshGrpcBoundaryTests replaces the MeshClusterClientBoundaryTests deleted in step 1. Three
self-seeded single-member clusters sharing the ActorSystem name, joined ONLY by gRPC, driving
the REAL CentralCommunicationActor -> MeshGrpcCommandDialer -> Kestrel h2c ->
MeshCommandAuthInterceptor -> NodeCommandGrpcService -> NodeCommunicationActor -> EventStream:
1. No_cross_mesh_Akka_association_forms_between_central_and_either_site — the program's own
point, kept as a test rather than a live-gate note: each cluster stays single-member and
none ever holds another's address as a member.
2. One_dispatch_through_central_reaches_a_node_in_every_cluster_mesh — the fan, with each
site holding its OWN per-cluster PSK, so a dial that selected the wrong cluster's key
would be refused at the far side.
3. Falsifiability_control_a_dial_carrying_the_wrong_cluster_key_delivers_nothing — without
it, (2) cannot distinguish "the gRPC boundary carried it" from "something else in the
process did". The same node then accepts the right key, so the silence is the auth gate
and not a dead endpoint.
All three run fully offline — no Docker fixture — and pass.
Comment sweep across every remaining clusterclient|receptionist hit in src/ and tests/:
the program label becomes "mesh gRPC command plane", and every comment that described the
deleted transport as live now describes what actually runs (Dps = pair-local default,
Grpc = cross-mesh). mesh_transport.proto's header/service comments are reworded; no message,
field or enum is touched — the contract is locked. MeshCommActorPathTests is reshaped rather
than retired: the two paths still exist and still matter, but what a mismatch costs is now a
misleading Unavailable from the gRPC ingress rather than a silently dropped receptionist send.
The only surviving mentions of the old names are the ones that must survive: the fail-closed
rules that name "ClusterClient" as a retired value refused at boot, their tests, and this
test class's own account of what it replaces.
|
||
|
Joseph Doherty
|
e1db90f9c9 |
fix(mesh): 1B.1 review follow-ups
Two review items from Task 1B.1, both diagnostic: 1. CentralCommandGrpcService's "actor not ready" Warning omitted the peer and the correlation id while the decode-failure Warning six lines above carried both. These are the only two ways an ack fails to reach the coordinator, and an operator has to correlate either against the node's own log. Decoding has already succeeded on this path, so the DECODED correlation id is free. 2. A fused driver,admin,cluster-MAIN node under Mode=Grpc owes BOTH validator surfaces at once (driver keys AND ConfigServe:GrpcListenPort). The two blocks are independent `if`s; chained as `else if` a fused central node would be graded on one surface only and boot with nowhere for any ack to land. Pinned from both sides plus the fully-configured pass. |
||
|
Joseph Doherty
|
7e7df337cc | feat(mesh): CentralCommandService on the ConfigServe listener | ||
|
Joseph Doherty
|
39db75083d |
feat(drivers): every driver reports the authored tags it skipped (Gitea #541)
A driver builds its RawPath -> definition table at init and tolerates a
per-tag miss: an unmappable TagConfig, an unparseable address, a
capability-matrix rejection. That tolerance is right -- one bad tag must not
take down the other few thousand. What was missing is any statement of the
fact afterwards. A skip is not an error and happens before any read, so the
driver stays Healthy, errors/5 min stays 0, Last error stays empty, and Last
read advances live off the tags that did map. On the wonder Makino in #540
that reading held while focas-z-34184 ignored 20 of its 22 tags.
New optional capability ISkippedTagReporter, backed by a shared
SkippedTagLedger so the reset/commit/cap rules are one implementation rather
than one per driver. The report -- authored count, exact skipped count, and a
capped sample of RawPath + reason -- rides DriverHealthChanged to a new Tags
column on /hosts, over the Phase 5 telemetry stream. No table: a driver-only
node has no ConfigDb to write to, the lesson from #521.
The issue named eight drivers. It is twelve -- every driver in
DriverTypeNames.All has an authored-tag skip path. Calculation (no scriptId),
MTConnect (no readable DataItem id), Galaxy (no attributeRef) and OpcUaClient
(no nodeId) were unlisted, and OpcUaClient's was the quietest of the twelve:
NamespaceMap drops such an entry with a bare `continue` and not even a log
line. SkippedTagReporterFleetTests pins the invariant reflectively over every
IDriver in src/Drivers/, so a thirteenth cannot re-introduce the silence.
Sql drops a tag at TWO points and its report is the union of both: a blob
that does not map, AND an identifier the 8.1 catalog gate rejects against the
live catalog. The second is what schema drift produces -- a renamed column, a
dropped view -- months after a deployment sealed green, and reporting only
the first would have that driver claim "0 skipped" while polling half its
tags, which is worse than reporting nothing because the column would then be
actively reassuring.
Deliberately additive to driver state, never a change of it. Latching
non-Healthy for a config problem would satisfy both halves of the #527
comms-loss conjunction -- 90 s without a successful read AND non-Healthy --
and a driver whose tags were ALL skipped has no successful reads by
construction, so it would reconnect-loop forever against a healthy device.
Three details that are load-bearing rather than incidental:
- The skip digest is part of the publish fingerprint. A skipped tag leaves
every other fingerprint component identical to a clean driver's, so without
it PublishHealthSnapshot's dedup swallows exactly the publish carrying the
signal -- the trap that already bit the rediscovery and host-status
channels. The digest covers the sample, not just the counts: a redeploy
that fixes one tag and breaks another leaves both counts unchanged.
- The count is exact; only the sample is capped, and the tooltip says so when
it is showing fewer than it counted. A truncated list that looked complete
would have an operator fix twenty tags and believe the job done.
- The ledger stages and commits, so an init that throws part-way leaves the
previous report standing. A partial snapshot would read as "we now skip
fewer tags", the opposite of the truth.
The proto field needs no companion presence flag, unlike host_statuses: a
singular message field carries real presence in proto3, and a has_ flag would
collide with protoc's generated HasSkippedTags.
Verified red-first three ways: dropping SkippedTagDigest from the fingerprint
fails the two dedup tests, removing the seam from one driver fails the fleet
guard, and dropping the catalog-gate leg fails the Sql union test. Full
solution builds with zero new warnings against
|
||
|
Joseph Doherty
|
b61fe38823 |
fix(focas): browse-committed fixed-tree tags are readable (Gitea #540)
Authoring FOCAS tags through /raw -> Browse device... produced tags the driver
could never read. Every committed tag read BadNodeIdUnknown forever, and the
failure was silent end to end: the AdminUI accepted it, the deploy gate sealed
green, and the driver reported Healthy with 0 errors while ignoring the tags.
Net effect: the whole fixed-tree surface could not be published through any v3
authoring path. Found cutting wonder-app-vd03 over to v3 against a real Makino
Pro 5 / Fanuc 30i, where 0 of 20 committed tags read while two hand-authored
MACRO: tags on the same device read Good.
A captured browse leaf's id IS its DriverAttributeInfo.FullName, and the fixed
tree emitted "{deviceHost}/{path}" there -- an internal cache key, not an
address. Both authoring paths wrote it verbatim into TagConfig.address, and
FocasAddress.TryParse accepts no such form, so the driver skipped the tags at
init.
Fixed at the emitter rather than by stripping the host at commit, which fixes
the browse-commit flow and the manual picker's tree-select together and leaves
one canonical address form:
- FocasAddress gains a fourth kind, FIXED:<path>, and moves to Contracts so the
AdminUI and ControlPlane can parse without referencing the runtime driver
(#526). A FIXED: read is served from the fixed-tree snapshot the poll loop
already maintains -- no area read, no connection. Writes refuse: nothing in
that tree is a writable location on the CNC.
- The address carries no device. A tag's device comes from its Device row, and
a second routing channel for one fact is what created this defect.
- An authored FIXED: tag arms the fixed-tree poll loop by itself. Enabled
defaults false and the browser force-enables it only for a browse, so the
operator would otherwise browse, commit, deploy, and land on a driver whose
loop never starts -- every tag Bad with a correct address.
- Fixed-tree values are now dated from the last answered poll and go
BadCommunicationError once it is stale (8 cadences, floored at 30s). The poll
loop swallows a failed tick by design, so a dead CNC would otherwise serve its
last snapshot as Good indefinitely -- harmless while nothing could bind to the
tree, not harmless now.
Guardrails, so this class cannot recur silently:
- FocasTagConfigModel.Validate() runs the real parser instead of a non-empty
check, and FocasTagDefinitionFactory.Inspect() warns at the deploy gate, which
covers CSV/API config that never touches the modal.
- The manual picker offered axis/spindle/program/status "parameter groups" --
none of which is a FOCAS addressing space -- and its own default value,
axis:5, was unusable. It now composes PMC / PARAM: / MACRO: through
FocasAddress, so what it emits is parseable by construction.
Tests assert addresses ROUND-TRIP through the parser rather than matching an
expected string: the previous FocasAddressBuilderTests pinned "axis:5" exactly,
which is how a green suite coexisted with a picker nobody could use. Verified
red-first against the old emitter. FOCAS 308, AdminUI 1095, ControlPlane 169,
Core 581 -- all pass, 0 warnings.
The remaining half of #540 -- a driver reporting Healthy/0 errors while
skipping tags at init -- is fleet-wide (eight drivers do this) and is filed
separately rather than patched per-driver.
|
||
|
Joseph Doherty
|
08c1728a98 | feat(sql-adminui): Postgres + Oracle in the provider dropdown; docs | ||
|
Joseph Doherty
|
2c19a50bf9 | fix(raw): a superseded manual-entry open can no longer feed the pickers another device's config | ||
|
Joseph Doherty
|
4e3a6e8497 | fix(raw): a stale open can no longer feed the picker another device's config | ||
|
Joseph Doherty
|
c1c21f3ff8 | test(raw): pin the manual-entry accessor as live, not a captured snapshot | ||
|
Joseph Doherty
|
a2093b4400 | fix(raw): manual tag entry feeds each row's picker the merged device config (#468 follow-up) | ||
|
Joseph Doherty
|
abb9f8a1cb | fix(raw): tag edit modal feeds the picker the merged device config, not '{}' (#468 follow-up) | ||
|
Joseph Doherty
|
e698aee401 | test(raw): FakeRawTreeService for raw-modal component tests | ||
|
Joseph Doherty
|
6b3da93151 |
fix(browse): commit the browsed data type, and fix the probe classification the fixture was hiding (#536)
A browse-committed AB CIP / TwinCAT / FOCAS tag bound with its model's DEFAULT
data type, not the one the device reported. A browsed REAL committed as
`{"tagPath":"Pump_1_Speed","dataType":"DInt"}` — and those three drivers decode
the wire bytes by that field, not by the raw row's OPC UA DataType — so the tag
read four bytes of a float through an integer decoder and published a plausible
wrong number with no error raised anywhere. FOCAS was missed when #536 was filed.
The type is CARRIED, not derived. Reverse-mapping the leaf's driver-agnostic
DriverDataType looks like the smaller fix and is wrong: SInt/Int/DInt/USInt/UInt
all collapse into Int32 on the way out of the driver, so that version would bind
a 16-bit INT as a 32-bit DINT while appearing to fix the REAL. Drivers now state
their own type name on DriverAttributeInfo.NativeDataType, which reaches the
picker as AttributeInfo.AddressFields["dataType"] and the commit mapper from
there. A leaf that states nothing keeps the model default — the pre-#536
behaviour, kept deliberately as the fallback rather than a guess.
Numeric strings are refused before parsing: Enum.TryParse accepts "9" for any
enum and Enum.IsDefined then confirms it, so an unguarded parse would bind a tag
to a type nobody named. A test caught this in the first version of the guard.
--- and the other half, which the fixture was hiding ---
Test Connect on a device with NO authored tags — every AB CIP device at the
moment an operator first presses the button — reported "CIP handshake failed"
against a healthy controller. That was written down as a fixture limitation
("ab_server doesn't implement @raw_cpu_type"). Both halves of that were wrong:
* @raw_cpu_type is not a libplctag special tag at all (only @raw, @tags and
@udt/ are), so it goes out as an ordinary symbolic name that no controller
defines, and the controller's "tag does not exist" IS the successful answer.
* ab_server answered an unresolvable tag path with CIP 0x03 where a Logix
controller answers 0x04 — ErrorBadParam vs ErrorNotFound, which the probe
classifies oppositely. Fixed in vendored patch 0002.
* With the fixture then telling the truth, the real defect surfaced:
AbCipDriverProbe.IsReachableException matched the native C status spellings
("STATUS_NOT_FOUND"), but libplctag.NET throws with the MANAGED enum name
("ErrorNotFound"). Those substrings can never match, so the reachable
classification could not fire on the exception path — which is the path every
no-authored-tags probe takes. This was failing on real hardware too, not just
against the sim. It now recovers the Status and defers to IsReachableStatus,
so there is one classification rather than two that can drift.
Rejected: switching the fallback to @tags. libplctag builds a tag-listing tag
with NO network I/O, so it reports OK against any TCP listener — measured green
against a Mosquitto broker.
Verification: full solution suite green. Falsification runs confirm exactly the
intended tests go red — 9 for the type carry, 3 (the reachable statuses only) for
the probe classification. Live on docker-dev: browse-committed TestString/
Motor_Run/TestSINT now store String/Bool/SInt, alongside last session's
Pump_1_Speed still holding the wrong DInt. TestSINT is the falsifier — its row
DataType is Int32, identical to TestDINT's, so no reverse map could have produced
"SInt".
Known consequence: pre-existing browse-committed tags keep their wrong dataType;
the fix applies to new commits only.
Claude-Session: https://claude.ai/code/session_015p7wGqy3YpZNCpDzTpGMKo
|
||
|
Joseph Doherty
|
1a1dbc3f00 |
fix(uns): enforce the UNS segment rule on every authoring path (#535)
An area or line could be named "Packaging" or "Line 1", save cleanly, and then fail the NEXT deployment with UnsSegmentInvalid. Because a deployment snapshots the whole database, one badly-named area blocked EVERY cluster's deploy - and whoever hit that was usually not whoever typed the name. Only the equipment form carried the rule; the deploy gate held its own private copy. The rule now lives once, on Configuration.Validation.UnsSegment, and both ends call it. DraftValidator no longer restates it. Enforced in UnsTreeService, not just on the forms: - Create/Update Area, Line and Equipment reject an invalid name before touching the row. - The CSV import reports a bad name as an ERROR, not a skip - a skip means "you already have this row", which would tell the operator the equipment exists when it does not. Good rows in the same batch still insert. A form attribute could never have covered the import, and with no bUnit in this repo a rule only a form enforces is also a rule no test can reach. The forms keep an attribute for the immediate message, but it now references the shared pattern rather than restating it - a second copy is how these drifted apart. One behaviour change beyond the fix: UnsSegment.AttributePattern admits "_default", which the equipment form's hand-written literal rejected. The form was stricter than the gate it was mirroring, so a _default row was uneditable through the AdminUI. Tests: 41, falsified with three production mutations - dropping the CreateArea guard reds exactly the CreateArea rejections, turning the import error back into a skip reds only the import test, and narrowing AttributePattern reds only the attribute/IsValid agreement. Every rejection is paired with a name that must still be accepted, or a guard that refused everything would pass. Live-verified on docker-dev: the area modal now refuses "Packaging" in place with the rule spelled out, "packaging-b" saves, and a CSV import of two rows reports Inserted 1 / Skipped 0 / Errors 1 naming the offending row - the path no form attribute reaches. Rig cleaned up and a further deployment sealed. Claude-Session: https://claude.ai/code/session_015p7wGqy3YpZNCpDzTpGMKo |
||
|
Joseph Doherty
|
d542ab5b7c |
feat(security): author ACL grants from the real tree, not free text (#520 stage 7)
The last stage of #520. Enforcement landed in stages 5-6; this closes the authoring end, where a grant could be saved, deployed and sealed green while resolving to nothing. Scope kind and scope target are now chosen TOGETHER from a picker over the cluster's raw and UNS trees (AclScopePickerModal -> AclScopeTree, backed by IAclScopeService). They were previously an unrelated dropdown and a free-text box, so "RawDevice + a TagId" was a well-formed row. Because the trees are rooted at the grant's own cluster and each node supplies its own kind, NodeAclScopeCrossCluster, NodeAclScopeIdUnexpected, NodeAclScopeIdMissing and NodeAclScopeKindRetired all become unauthorable by construction. CheckScopeAsync mirrors DraftValidator.ValidateNodeAclScopes rule for rule and blocks the save when a scope resolves to nothing - re-checked on submit, not trusted from form load, because a row whose entity was deleted since is exactly where the operator never touches the picker. The list page marks such rows unresolved with the reason. The principal field suggests known principals and reports how many live keys reach the one typed; reaching nobody warns rather than blocks, since authoring ahead of minting is legitimate. Deliberate departures from the plan line, all recorded in the design doc: - The banners are reshaped, not removed. "Not enforced" stopped being true at stage 6, but enforcement is still a per-node flag the AdminUI cannot see, so a narrow grant really does confer nothing on a default-configured node. - A Cluster row produces a NULL ScopeId. The deploy gate rejects one that carries an id, so filling in the cluster id would author undeployable rows. - AclScopeTree is a new component rather than a third mode on RawTree, which already carries the /raw editing tree and the equipment reference picker. - UNS tags are not offered: a UNS signal is a UnsTagReference, and a Tag grant already covers the raw node and every UNS projection of it. Also fixed: the ACL editor had a DataAnnotationsValidator and no ValidationSummary, so an invalid NodeAclId made Create a silent no-op. Tests: 30 in AdminUI.Tests/Acls, falsified with six production mutations - each turned exactly the intended tests red and no others. Live gate PASSED on docker-dev, 11 legs; both central containers asserted on the same image by container id. The pair that matters is legs 8 and 11: the page and the deploy gate reject the same row with the same reason. Legs 5 and 9 are the positive controls - without them the gate passes against a page that refuses everything. Not covered: UNS-realm scope selection (SITE-A has no UNS areas). Rig restored to zero ACL rows. Claude-Session: https://claude.ai/code/session_015p7wGqy3YpZNCpDzTpGMKo |
||
|
Joseph Doherty
|
3a6b2a1daf |
feat(acl): variable-depth scope model + the scopePaths producer (#520 stage 3)
Makes the /raw device tree addressable by an ACL rule, and builds the
scope-path producer PermissionTrieBuilder has accepted since it was written
but which had no caller anywhere.
The plan for this stage said "add NodeHierarchyKind.Raw, whose path is the
RawPath segments Folder/Driver/Device/TagGroup/Tag". That shape is wrong.
RawFolder.ParentRawFolderId and TagGroup.ParentTagGroupId are both
self-referencing, so folders and tag groups each nest without bound and a real
RawPath is folder…/Driver/Device/group…/Tag. NodeScope was fixed-arity and
PermissionTrie.CollectMatches was five hardcoded steps, so the scope model
could not address a real raw tree at all. NodeScope is now {ClusterId, Kind,
Segments} and the walk is a segment loop. The trie STRUCTURE was already
variable-depth (NodeAclPath.Segments is a list, Children is a recursive
dictionary), so only the walker and the scope record had to change.
Four decisions worth keeping:
- The namespace level became the realm. Level 1 gated on NodeScope.NamespaceId,
but v3 has no Namespace entity — the snapshot was retired when the address
space went dual-namespace, and the identifier appears nowhere in production
outside NodeScope. So the level could only ever fail to match, which silently
made every sub-cluster grant unreachable while cluster grants kept working.
It is now a realm token derived from the scope's Kind, not carried on it, so
the walk and the producer cannot disagree about its spelling.
- Provenance comes from the granting row's own ScopeKind, recorded on TrieGrant
at build time. Depth-derived provenance could not name a raw level at all,
since the depth of "Device" varies with folder nesting.
- The trie comparer moved from OrdinalIgnoreCase to Ordinal. Raw sibling-name
uniqueness is ordinal, so Speed and speed can both exist under one device and
a grant on either would have matched both.
- The null-scopePaths "deterministic test mode" is deleted. It planted
unresolvable rows at a direct child of the trie root, a position the walker
cannot reach, so the grant looked placed and could never match — and every
test using that mode proved nothing about production placement. scopePaths is
now required, and a row that does not resolve is dropped with a diagnostic.
A scope resolves to a LIST of paths: a raw tag projected into N equipments is
reachable at N+1 NodeIds and a write through any of them lands on the same
driver reference, so a Tag-scoped grant covering only the raw node would be
bypassable through a UNS one. The lookup is keyed on (ScopeKind, ScopeId), not
ScopeId alone — ScopeId has no FK and no type discriminator, so an id collision
across entity types would hand a grant the wrong node's paths.
Also closed here, all found by review rather than asked for:
- NodeAcl rows had no deploy-time validation of any kind and were not reachable
from DraftValidator at all (DraftSnapshot carried no NodeAcls). They are now
gated for dangling ids, cross-cluster scopes, blank/contradictory ScopeId, the
retired FolderSegment kind, and undefined ordinals.
- ConfigDbApiKeyStore conferred roles from Cluster-scoped grants authored in ANY
cluster, because it filtered on scope kind with no ClusterId predicate while
ArtifactApiKeyStore read an already-cluster-filtered snapshot. On a fused
admin+driver node that was a cross-cluster over-grant. Its doc comment claimed
the two stores matched.
- The two AdminUI ACL banners still said enforcement was LDAP-group -> role
mapping, which stages 1/2 made false in both directions.
- The /apikeys page was never classified in PageAuthorizationGuardTests, so that
test has been red since the key-minting commit merged — I did not run
AdminUI.Tests before merging stage 4.
Falsified rather than assumed: 8 mutations against the trie tests, 5 against the
deploy gate (including one proving a cross-cluster row is not silently
mis-diagnosed as unresolved), a staged red->green for the over-grant regression,
and the realm gate, the comparer and the malformed-path guard each broken
individually to confirm only their own tests go red.
Node ACLs are still not ENFORCED — nothing constructs a NodeScope or calls the
evaluator yet. That is stages 5 and 6; this stage makes the model able to
express what those will enforce.
Claude-Session: https://claude.ai/code/session_015p7wGqy3YpZNCpDzTpGMKo
|
||
|
Joseph Doherty
|
803f4e6efe |
refactor(sql): split ISqlDialect/SqlServerDialect into a .Dialect leaf (#526)
`Driver.Sql.Browser` referenced the runtime `Driver.Sql` project. The AdminUI references that browser, so the whole SQL driver runtime — and `ZB.MOM.WW.OtOpcUa.Core` through it — sat in the AdminUI's build/deploy graph. This is the same layering violation #512 removed from the MQTT browser, in a second driver, and it is why #512's expected removal of `Core.dll` from the AdminUI's output did not happen. MEASURED, both directions, on a clean AdminUI build: before: ZB.MOM.WW.OtOpcUa.Core.dll + ZB.MOM.WW.OtOpcUa.Driver.Sql.dll present after: both absent The old csproj comment's premise was sound and survives — the dialect's catalog SQL *is* the browse engine, so it must be shared rather than duplicated. What was wrong was the conclusion that sharing it required referencing the runtime driver. `ISqlDialect`/`SqlServerDialect` depend on nothing in `Driver.Sql`, so they move to a `.Dialect` leaf that both consume. This is the `.Transport` shape, not the cheap one: `ISqlDialect` exposes `DbProviderFactory` and `SqlServerDialect` returns `SqlClientFactory.Instance`, so `.Contracts` (deliberately provider-free) cannot hold them. Assembly name is `.Dialect`; the NAMESPACE stays `ZB.MOM.WW.OtOpcUa.Driver.Sql`, matching the `Driver.Mqtt.Transport` precedent — the extraction cost zero `using` changes. Two dependencies the cut edge surfaced as the implicit ones they were: - The AdminUI itself read `SqlDriver.DriverTypeName` in three places — the tag editor map, the tag config validator, and the Sql address picker. All three now read `DriverTypeNames.Sql`, which is exactly what that constant resolves to and exactly the repoint `SqlDriverBrowser`'s own comment had deferred until a factory was registered against the shared constant. One exists now. - `SqlDriverFormContractTests` asserts the AdminUI form's emitted JSON against the runtime factory that reads it, so it genuinely needs the runtime driver. `AdminUI.Tests` now references it explicitly. A test project referencing a runtime driver is fine — tests are not in the AdminUI's deploy graph. New guard: `DriverBrowserLayeringTests` (Commons.Tests) scans the csproj graph of every `*.Browser` project in the tree, transitively. It reads csproj files rather than loaded assemblies because the cost is a build-graph cost — the compiler emits no assembly reference for an unused `ProjectReference`, so `MqttBrowserLayeringTests`' assembly-reference approach cannot see that case. The two are complementary and each now points at the other. Falsified three ways, each red then green again: the direct reference re-added to the browser; the same reference one hop out via `.Dialect` (proving the walk is really transitive); and both controls — browsers-discovered and references-parsed — which exist so an empty discovery cannot pass the absence assertion vacuously. #526's claim that the reference "carries no comment at all" was wrong; it carried a detailed one from the scaffold commit. Corrected on the issue and in the design doc's project table, which had recorded the deviation as deliberate. Claude-Session: https://claude.ai/code/session_015p7wGqy3YpZNCpDzTpGMKo |
||
|
Joseph Doherty
|
7f53bd96ec |
fix(mqtt): close #509, #510, #512, #513, #514
Five MQTT tracker items — four AdminUI/authoring defects plus the .Browser layering exception. No runtime driver behaviour changes. #513 payloadFormat in a Sparkplug blob. MqttTagConfigModel.ToJson wrote the key unconditionally. Sharper than the issue states: PayloadFormat is the one Plain field with a NON-NULLABLE typed backing, so the write did not preserve a retyped tag's leftover — it INVENTED "payloadFormat":"Json" in a Sparkplug tag that never had one. Now Plain-only; preserve-unknown-keys is pinned unchanged. #509 slashed Sparkplug metric names. The mapper already carried metricName verbatim; only the tag Name (a RawPath segment) tripped RawPaths.ValidateSegment, which refused the batch whole — including Node Control/Rebirth, mandatory on every Sparkplug edge node. ToRawSegment coerces the Name and leaves the address untouched. Coercion is not injective, so DescribeNameCollisions refuses a colliding set BY NAME: silently merging two metrics into one tag would be worse than the refusal it replaces. Applies to every driver, not just MQTT — the argument is about what a Name is, not about who produced it. The sanitiser is pinned against RawPaths.ValidateSegment rather than a copied charset. #510 stale rebirth affordance. _canRebirth was probed once at browse-open and sessions are reaped for idleness, so a modal left open offered an action whose token no longer resolved. Re-probed on arm AND on confirm (the reap can land between the two, and confirm is the one path that publishes to a live broker); the affordance retires with an explanation instead of vanishing or erroring. #514 rebirth on a quiet plant. The tree is birth-driven and births are never retained, so a plant that birthed before the window opened showed an empty tree — and the scope came only from a tree selection, so the one action that would fill the tree could not be armed. The session already accepted a bare {group}/{edgeNode} ("the prime rebirth target"); this adds the affordance. Edge-node scope only, not a group broadcast. The rule is extracted to SparkplugRebirthScope so it is testable — this repo has no bUnit — and is advisory: the session re-resolves and refuses before publishing. #512 .Browser -> .Driver layering. TWO extractions were needed, not the one the issue anticipated: it costed this as "the client-options builder", but the browse session decodes births itself, so moving only that would have left the reference exactly where it was. - MqttClientOptionsFactory (TLS, PEM CA-pin validator, credentials, protocol mapping) -> new leaf .Transport project. NOT .Contracts: that is deliberately transport-free and MqttClientOptions is an MQTTnet type, so .Contracts would hand MQTTnet to ControlPlane. This is the fix the .Browser csproj comment had already prescribed, against the issue's suggestion. - The Sparkplug protocol layer (SparkplugTopic/MessageType, SparkplugCodec, RebirthRequester) -> .Contracts, beside the Tahu wire schema it encodes. Still exactly one copy of the TLS/CA-pin logic; MqttBrowserLayeringTests guards the graph both ways. Measured, not assumed: Driver.Mqtt.dll, Polly.Core and Serilog are now absent from the AdminUI's output. Core.dll remains, because Driver.Sql.Browser has the SAME violation, undocumented — the old comment blamed this browser for Core and was wrong. Filed separately rather than fixed in passing. Full suite green apart from the 7 known pre-existing failures (4 AbLegacy integration, compose profiles not up; 3 Host.IntegrationTests). Claude-Session: https://claude.ai/code/session_015p7wGqy3YpZNCpDzTpGMKo |
||
|
Joseph Doherty
|
cbb882293b |
refactor(drivers): delete the inert driver-tier recycle machinery (#522)
The tier system was documented, operator-authorable, and inert. Deleted rather than activated,
because its premise is gone rather than merely unused.
"Tier C" meant a driver running out-of-process behind an IDriverSupervisor that could restart its
Host without tearing down the OPC UA session. No such process exists anywhere: Galaxy reaches
MXAccess over gRPC to the external mxaccessgw sidecar (PR 7.2 retired the in-process
Galaxy.Host/Proxy/Shared projects) and FOCAS has run in-process since its managed wire client
landed 2026-04-24. Consistently, IDriverSupervisor had ZERO implementations and there was nothing
for one to implement against.
The issue understated the inertness. It says the Tier-C-only protections never engaged, implying
the Tier A/B parts did. They did not: nothing constructs MemoryTracking, MemoryRecycle or
ScheduledRecycleScheduler outside their own unit tests, so the whole Core/Stability recycle layer
was dead — meaning option (a), "pass real tiers", was never a flag flip. It would have meant
writing the wiring that never existed AND arming it.
Deleted: MemoryTracking, MemoryRecycle, ScheduledRecycleScheduler, IDriverSupervisor, the
vestigial DriverTypeRegistry (referenced only by its own tests), and the RecycleIntervalSeconds
knob — which the AdminUI let an operator author and the parser validated while it configured
nothing.
DriverTier itself SURVIVES and is load-bearing: DriverResilienceOptions.GetTierDefaults supplies
the real per-capability timeout/retry/breaker policies via DriverFactoryRegistry.GetTier and
DriverCapabilityInvokerFactory. Only the isolation-and-recycle layer above it is gone.
Deliberately NOT deleted:
- WedgeDetector came along in the same directory and is equally dead in production, but it is
tier-agnostic and is not recycle machinery — it only shares the folder. Restored rather than
swept up in a decision that was not about it.
- IDriver.GetMemoryFootprint() and FlushOptionalCachesAsync() lose their only consumer here.
Removing them touches all 12 drivers and every test stub, so they are documented as
consumerless and filed as #525 instead of buried in this diff.
Compatibility: a deployed ResilienceConfig blob still carrying "recycleIntervalSeconds" parses
cleanly (unknown keys are ignored — guarded by a new test, because a blob that suddenly failed to
parse would fall back to tier defaults and silently discard the operator's real overrides), and
the AdminUI's preserve-unknown-keys bag keeps the key rather than rewriting stored config on an
unrelated edit.
The 01/U-6 knob-inertness guard carried an explicit carve-out admitting RecycleIntervalSeconds was
dormant and out of scope; that carve-out is now gone, so the expected set is literally what the
test's name claims.
Note: Host.IntegrationTests has 2 failures (DriverProbeRegistrationTests.is_idempotent,
PrimaryGateFailoverTests) — verified pre-existing by reproducing both on clean master
|
||
|
Joseph Doherty
|
30d0697c28 |
feat(hosts): surface per-host connectivity on /hosts; drop the unwritable table (#521)
`IHostConnectivityProbe` was a dead surface: eleven drivers implement it, `GetHostStatuses()` had ZERO production call sites, and `OnHostStatusChanged` had no subscriber outside the Galaxy driver's own aggregator. Per-host connectivity was computed by every driver and read by nobody. The issue offered "build the publisher or delete it". The publisher as its entity doc described it — driver nodes upserting `DriverHostStatus` rows — is not buildable: per-cluster mesh Phase 4 gates `AddOtOpcUaConfigDb` on the `admin` role, so a driver-only node has no ConfigDb connection to write rows with. So the capability is kept and the transport changed. `DriverHealthChanged.HostStatuses` now carries the probe result to `/hosts` as a Hosts column. That channel already reached the page, already survives the mesh split via the Phase 5 gRPC telemetry stream, and already replays a last-value snapshot on re-subscribe — so per-host state re-primes after a reconnect without a durable store. Both halves of the interface finally do what they are for: the event triggers a prompt publish, the pull is the source of truth. The point of the column is the case the driver-level state chip structurally cannot express: a multi-device driver stays aggregate-Healthy while ONE of its devices is unreachable. Two traps, both pinned by tests that were falsified against the prod code: - The host digest MUST be in the publish fingerprint. On a single-host-down transition every other fingerprint component is unchanged, so the dedup would swallow exactly the publish carrying the news — the trap that already bit the rediscovery signal. Removing it turns the guard test red, verified. - null (no probe) must stay distinct from empty (probe with no hosts). proto3 cannot tell an absent repeated field from an empty one, hence the explicit `has_host_statuses` flag; collapsing them would render every probe-less driver as one whose devices are all fine. Dropped: the DriverHostStatus entity, enum, DbSet, model config and table (migration DropDriverHostStatusTable — empty on every deployment, so the scaffolder's data-loss warning is moot, and Down() recreates it exactly). Found en route, NOT fixed here: `DriverInstanceResilienceStatus` is the identical defect — no writer, no reader, only a DbSet declaration, while the live data rides the `driver-resilience-status` telemetry channel. Its doc-comment now states that rather than describing the sampler and AdminUI join that were never built. Filed as #524 rather than widening this schema change beyond what was asked. Claude-Session: https://claude.ai/code/session_015p7wGqy3YpZNCpDzTpGMKo |
||
|
Joseph Doherty
|
6a01358b9a |
fix(adminui): guard the driver dispatch maps and close G-1..G-6 (§8.4)
A parity guard already existed for DriverTypeNames <-> the /raw driver picker, but not for the two dispatch maps downstream, so a driver could be registered, offered in the picker, and then have no config form. That is exactly what happened to Calculation (G-1) and to Sql/MTConnect/Calculation on the device modal (G-2) — both survived review because nothing could see them. The maps had to become data first. A Razor @switch compiles into BuildRenderTree's IL, so no test can enumerate its cases; the picker guard works only because RawDriverTypeDialog keeps its data in a field the markup enumerates. Both modals now render from DriverConfigFormMap / DeviceFormMap through <DynamicComponent>, and being public those maps need none of the picker test's BindingFlags.NonPublic fragility. - G-1 CalculationDriverForm.razor — RunTimeout was unauthorable via the UI. - G-2 Sql/MTConnect/Calculation declared single-connection rather than given hollow device forms; each holds one connection at the driver level. - G-3 DriverConfigModal's hardcoded "Galaxy or Mqtt" -> IsSingleConnection, so Sql/MTConnect authors are no longer sent to a device form with no endpoint. - G-4 DriverFormMapParityTests (5, both directions) + DriverDispatchMapParityTests. - G-5 CsvColumnMap entries for Sql, Mqtt, MTConnect. - G-6 RawBrowseCommitMapper Sql branch — and the browser end, which the audit missed: SqlBrowseSession emitted NO AddressFields, so a browsed leaf carried only a column name, and a column alone cannot address a Sql tag. It now travels schema/table/column and the mapper builds a WideRow config from them. A branch alone would have produced a half-built blob. Two findings while writing the guards. The G-6 test showed Modbus and Calculation also hit the generic address fallback — correctly, as neither is browsable — so it asserts the fall-through set EQUALS a documented non-browsable list in both directions; a one-way check would let a newly browsable driver be quietly added to the exclusion list. And TagConfigDriverTypeNameGuardTests was hollow: it enumerated a hand-written TheoryData that had already drifted (omitting Galaxy, Sql and Mqtt), guarding renames but not gaps. Now enumerated from the map with a coverage test facing the other way. Live-verified on docker-dev, since this repo has no bUnit and no unit test reaches Blazor parameter binding: opened Calculation's config (previously "No typed config form"), typed 3500, saved, reopened — the value persisted, so the DynamicComponent two-way binding round-trips. Sql's form renders fully and now reads "This driver holds a single connection, authored above". AdminUI.Tests 930 passed. |
||
|
Joseph Doherty
|
9227d03ca8 |
feat(mtconnect): make an MTConnect driver creatable + configurable in /raw (Task 18 Part B)
An MTConnect driver instance could not be authored at all: RawDriverTypeDialog
(the only DriverInstance creation surface) offered a hardcoded 9-entry list
without it, and DriverConfigModal's default: branch renders a warning with no
raw-JSON fallback — so even a hand-inserted row could not be configured and
DriverConfig stayed "{}", on which ParseOptions throws "missing required
AgentUri".
Adds the typed MTConnectDriverForm (the consistent sibling pattern) covering
agentUri / deviceName / the four polling knobs / probe / reconnect, wires the
dispatch case, and offers the type in the dialog.
- All decisions live in the static MTConnectDriverForm.BuildConfigJson +
MTConnectFormModel (plain C#), because this project has no bUnit.
- The wire shape mirrors the driver's private MTConnectDriverConfigDto, NOT
MTConnectDriverOptions: the latter's TimeSpan probe knobs would serialise as
"00:00:05" and never bind to the driver's integer intervalMs.
- arch-review 01/S-6: a non-positive timing knob is REMOVED from the document
rather than written, so ParseOptions substitutes the driver's own positive
default instead of the driver faulting at Initialize on RequirePositive.
Removal (not just skipping) also stops a stale positive value surviving and
disagreeing with what the form shows.
- Unknown top-level keys survive a load/save, so the driver's hand-authored
tags[] surface is not silently deleted by opening the form.
- _jsonOpts carries JsonStringEnumConverter, satisfying the
DriverPageJsonConverterTests fleet guard properly rather than by exemption.
New RawDriverTypeDialogCoverageTests resolves the offered set through
DriverTypeNames.All, so the next registered driver fails here until the dialog
offers it.
|
||
|
Joseph Doherty
|
115a43dd47 |
feat(mtconnect): typed AdminUI tag-config editor + browse round-trip (Task 18 Part A)
Registers the MTConnect typed tag editor in TagConfigEditorMap /
TagConfigValidator (keyed off DriverTypeNames.MTConnect, never a literal) and
adds the razor shell over Task 17's MTConnectTagConfigModel.
The shell stays trivial: the /probe-sourced mtCategory/mtType/mtSubType/units
row is rendered disabled + readonly with NO binding of any kind, and no
inferred-type hint is shown — MTConnectDataTypeInference.Infer() also keys on
the DataItem `representation`, which the tag-config model does not carry, so
calling it here would agree with the browse picker for ordinary items and
silently disagree for exactly the DATA_SET/TABLE/TIME_SERIES ones.
Also fixes the picker -> editor round trip, which was broken in both
directions:
- RawBrowseCommitMapper.BuildTagConfig had no MTConnect branch, so a committed
tag landed as the generic {"address": "<dataItemId>"} while the model read
only `fullName`. The data plane kept working (the driver accepts all three id
spellings), so the only symptom was an empty DataItem-id field in the editor
— and saving from that state stamped fullName:"" over the tag.
- MTConnectTagConfigModel.FromJson now accepts dataItemId/address as fallbacks
(fixing tags committed before this change) and ToJson normalises onto
`fullName`, dropping the aliases so the two spellings cannot drift.
|
||
|
Joseph Doherty
|
b0046d6959 |
feat(mtconnect): typed AdminUI tag-config model (Task 17)
MTConnectTagConfigModel: pure FromJson/ToJson/Validate for the MTConnect tag TagConfig JSON blob, mirroring ModbusTagConfigModel/OpcUaClientTagConfigModel. Fields: fullName (DataItem@id, required), dataType (DriverDataType override, written as an enum name string), mtCategory/mtType/mtSubType/units (probe metadata), mtDevice/mtComponent (author context). Preserves unknown JSON keys across load->save (isHistorized/historianTagname and anything else). Guards against the enum-serialization trap (numeric dataType would fault the driver at deploy) both on write (always TagConfigJson.Set via enum name) and on read (Validate() rejects a dataType that was stored as a bare digit string, since Enum.TryParse silently accepts numeric text). AdminUI.csproj gains a ProjectReference to Driver.MTConnect.Contracts, matching the existing POCO-only driver-Contracts pattern used by the other six typed tag editors. Scope: pure model only (Task 17). The razor editor shell + TagConfigEditorMap/ TagConfigValidator registration is Task 18. |
||
|
Joseph Doherty
|
c3a2b0f773 |
Merge branch 'feat/mqtt-sparkplug-driver'
# Conflicts: # src/Core/ZB.MOM.WW.OtOpcUa.Core.Abstractions/DriverTypeNames.cs # src/Server/ZB.MOM.WW.OtOpcUa.AdminUI/Components/Shared/Drivers/DriverConfigModal.razor # src/Server/ZB.MOM.WW.OtOpcUa.AdminUI/EndpointRouteBuilderExtensions.cs # src/Server/ZB.MOM.WW.OtOpcUa.AdminUI/Uns/TagEditors/TagConfigEditorMap.cs # src/Server/ZB.MOM.WW.OtOpcUa.AdminUI/Uns/TagEditors/TagConfigValidator.cs # src/Server/ZB.MOM.WW.OtOpcUa.AdminUI/ZB.MOM.WW.OtOpcUa.AdminUI.csproj # src/Server/ZB.MOM.WW.OtOpcUa.Host/Drivers/DriverFactoryBootstrap.cs |
||
|
Joseph Doherty
|
123ddc3f40 |
fix(scripteditor): complete + hover absolute RawPaths (#490)
The issue reports a missing feature. The cause is a stale projection, and the
consequence was worse than the gap described.
`ScriptTagCatalog` still emitted `Tag.TagConfig.FullName` — the pre-v3 driver wire
address. Since v3 the mux key is the **RawPath**: `AddressSpaceComposer` harvests the
`ctx.GetTag("…")` literals into `DependencyRefs`, those become `VirtualTagActor`
dependency refs registered with `DependencyMuxActor`, whose `_byRef` is keyed Ordinal
by `AttributeValuePublished.FullReference` — and a driver's wire ref IS the RawPath
(`DriverHostActor._nodeIdByDriverRef` is keyed `(DriverInstanceId, RawPath)`). The
`{{equip}}/<RefName>` form already substitutes to RawPaths at both compose seams.
So the catalog was wrong in BOTH directions, not merely incomplete: completion
offered paths that could never resolve at runtime, while a CORRECT absolute RawPath
got no completion and hovered as "not a known configured tag path". The file's own
comment admitted the raw/UNS catalog was left for "Batch 2/3" and it never came.
Now projected through the shared `RawPathResolver` — the same byte-parity authority
`DraftValidator` and `AddressSpaceComposer` use — so a suggested path is identical to
the one the deploy gate and the runtime compute. A tag with a broken ancestry chain
resolves to null and is omitted: the runtime could not route it either, so offering
it would be a lie. Hover additionally gains the owning `DriverInstanceId`, which the
topology now makes available (it was always null before).
Editor-accepts <=> publish-accepts is preserved: no diagnostic keys off this catalog
(`OTSCRIPT_EQUIPREF` only marks `{{equip}}` paths), so this changes completion and
hover only — it cannot newly reject a script.
The existing tests pinned the v2 contract and were re-authored: a RawPath only exists
if the RawFolder -> DriverInstance -> Device -> TagGroup -> Tag chain does, so the
seed now builds one. Added coverage for group-nested paths, a driver at the cluster
root (no folder segment), a broken chain being omitted rather than guessed, and the
pre-v3 FullName no longer resolving.
Live-gated on docker-dev (rig rebuilt, both central nodes):
- completion, empty literal -> every RawPath incl. group-nested
`opcua1/plc/OpcPlc/Telemetry/Basic/AlternatingBoolean`
- completion, prefix `pymod` -> `pymodbus/plc/HR200X`, `pymodbus/plc/ImportedTag`
- hover `pymodbus/plc/HR200X` -> "Tag · Type UInt16 · Driver MAIN-modbus"
- hover an unknown path -> "Not a known configured tag path"
AdminUI 742/742; script-analysis 55/55; solution builds 0 errors.
|
||
|
Joseph Doherty
|
0f38f48679 |
merge: Modbus RTU-over-TCP transport (#495)
Wave 1 of the driver-expansion program. The branch was complete and live-gated but had never been merged; it sat 15 commits ahead and 50 behind master. Purely additive behind the existing IModbusTransport seam — the application protocol (function codes, codecs, planner, coalescing, write path, probe, materialisation, HistoryRead) is identical across TCP and RTU; only the wire framing differs ([addr][PDU][CRC-16], no MBAP, no TxId). Zero changes to codecs/planner/health. Selected by a new Transport config field (ModbusTransportMode: Tcp | RtuOverTcp), routed through ModbusTransportFactory (throws on unknown mode), with the string-enum guard on options/DTO/factory and a Transport selector on the AdminUI Modbus form. ModbusSocketLifecycle was extracted from ModbusTcpTransport (behaviour-preserving) and is composed by both transports. Descoped by design: direct-serial (System.IO.Ports) and Modbus ASCII — RTU buses are reached exclusively via a serial->Ethernet gateway. No per-tag config changes; the existing per-tag UnitId already makes a multi-drop bus work. Re-validated against current master at merge time (the branch's own gate predates 50 commits of master): no overlapping files, clean merge, solution builds 0 errors, and Modbus 344/344, Modbus.Addressing 161/161, AdminUI 740/740, Runtime 507/507, Configuration 131/131 all pass. Confirmed the Transport selector is still reachable through master's current authoring path (DriverConfigModal -> ModbusDriverForm), so the branch's live /run gate result still applies. |
||
|
Joseph Doherty
|
47d148daf9 |
fix(adminui): never slice a DB-sourced string with the range operator (#504)
`Scripts.razor` rendered a hash prefix as `@s.SourceHash[..12]…`. `SourceHash`
is a plain nvarchar(64) with no length floor, so any value shorter than 12
characters threw ArgumentOutOfRangeException out of BuildRenderTree — unhandled
in Blazor, which takes the WHOLE page to an HTTP 500, not just the offending
row. Live-reproduced on docker-dev, where two Script rows carry `h1` and
`h-abs-hr200`: /scripts was a hard 500.
New `Components/Shared/DisplayText.Abbreviate(string?, int)`:
- null/blank renders the Admin UI's em-dash placeholder rather than throwing;
- a value already within budget renders verbatim with NO ellipsis, so the
display never implies text that isn't there (the old markup appended "…"
unconditionally, outside the slice — `h1` would have shown as `h1…`);
- a maxLength < 1 is clamped, so a display bug cannot become a page crash.
Applied to every unguarded range-operator slice over a DB-sourced string found
by sweeping the AdminUI for `[..N]`:
Scripts.razor SourceHash (the reported crash)
Certificates.razor Thumbprint (read off the on-disk store)
Deployments.razor x2 RevisionHash
Clusters/ClusterOverview.razor RevisionHash
The other `[..N]` hits are safe and untouched: Guid.ToString("N") slices
(always 32 chars) and the `Length > 60 ? [..60]` ternaries that self-guard.
NOTE — the issue text blamed the docker-dev seed; that was wrong and is
corrected on #504. `seed-clusters.sql` inserts only ServerCluster, ClusterNode
and LdapGroupRoleMapping. The short-hash rows came from earlier live-gate
authoring. A freshly seeded rig is fine; the trigger is any Script row that did
not go through ScriptEdit / UnsTreeService.HashSource — REST-API authored,
hand-inserted, or migrated in.
Tests: 14 new in DisplayTextTests, covering the short/null/blank/clamped cases
and a never-throws sweep over every value x budget combination. AdminUI suite
739/739.
Live-verified on docker-dev (AdminUI has no bUnit): /scripts 500 -> 200 across
both central nodes, rendering `hash=h1` and `hash=h-abs-hr200` in full;
/deployments still truncates 64-char hashes at 12 with the ellipsis;
/certificates and /clusters/MAIN unchanged.
|
||
|
Joseph Doherty
|
d5bd4226ee |
docs(mqtt): Sparkplug P2 live-verified; MQTT driver complete
Task 26 — the P2 milestone gate. Ran the live /run verification on an isolated
docker-dev rig (project otopcua-mqtt, ports 9210/4850-4851/14350, image built
from this branch) against the real Mosquitto TLS+auth broker and the C#
Sparkplug edge-node simulator on 10.100.0.35, and recorded the result.
The gate found three defects. Two are the same defect class the P1 gate found
twice — a hand-maintained AdminUI surface left behind by a driver-side feature —
and the third is a pre-existing cross-driver bug that only a Sparkplug flow
could surface.
1. CRITICAL, FIXED — MqttDriverForm still shipped its P1 Sparkplug PLACEHOLDER.
Switching Mode to SparkplugB rendered a "not available yet" notice and NO
Group ID field, so with Sparkplug ingest fully shipped there was still no
way to author a Sparkplug driver from the AdminUI at all. Sparkplug.GroupId
is the driver's entire subscription filter (spBv1.0/{GroupId}/#): blank ⇒
connected, Healthy, ingesting nothing. Now authors all five Sparkplug keys,
MERGES over the existing sub-object rather than replacing it (so a key a
newer driver adds inside it survives an older AdminUI), leaves it untouched
in Plain mode, and validates the group id as the topic segment it is.
Pinned by 8 MqttDriverFormModelTests cases, verified falsifiable — 8 RED
with the fix stubbed out.
2. PRE-EXISTING + CROSS-DRIVER, FIXED — every node label in the shared
DriverBrowseTree was an <a href="#">. In a Blazor Web App, blazor.web.js's
enhanced-navigation click interceptor resolves a bare "#" against
<base href="/">, so clicking ANY browse-tree node label navigated the whole
AdminUI to "/", tore down the circuit, and destroyed the hosting modal —
losing the browse session AND the tag selection. @onclick:preventDefault
does not help: it suppresses the browser's default action, not Blazor's own
interceptor. Labels are now <button type="button">. Dates to the component's
introduction (2026-05-28) and affects EVERY driver's picker; it surfaced
only now because choosing a rebirth scope is the first flow that requires
clicking a label rather than the ▶ toggle (always a button, always fine).
3. FIXED (mitigation) — the browse tree rendered exactly once, at open, and
never again, while OpenAsync returns as soon as the SUBSCRIBE is granted.
On Sparkplug that means it is almost always empty forever, because births
are never retained. Added a Refresh button that re-reads the root against
the SAME session (nothing reconnects, nothing observed is lost, the tag
selection is kept, only the armed rebirth scope is cleared).
Live gate result (all against the real broker + simulator, group OtOpcUaSim):
- driver authored end-to-end through the fixed MqttDriverForm; blob is
Mode:SparkplugB + Sparkplug.GroupId:OtOpcUaSim with enums as names
- browse: BROWSER OPEN chip, Sparkplug-only rebirth panel, tree renders
Group → EdgeNode → [Device] → Metric with the device folder Filler1 and
node-level metric leaves SIDE BY SIDE, and "Node Control/Rebirth" as ONE
leaf (the metric-name-is-not-a-topic-segment rule holding)
- rebirth: group scope names the group + the 32-node cap, Cancel published
NOTHING (simulator log unchanged); edge-node scope → "1 command published"
and the simulator logged "rebirth NCMD #1 received; republishing metadata";
group scope → "2 commands published", both edge nodes re-birthed; a device
and a metric both resolve UP to "edge node EdgeA"; the panel does NOT render
for a Plain MQTT device
- browse-commit wrote bindable tuples with no topic/address key —
{"groupId","edgeNodeId","metricName","deviceId"} for the device metric and
deviceId ABSENT (not blank) for the node-level one, datatypes inherited from
the birth (Int64 / Float)
- deployed (Sealed), and both nodes served live changing values through OPC UA
at the 2 s cadence — Good 0x00000000, no BadNodeIdUnknown
- death→STALE: stopping the simulator drove both nodes to 0x80000000 with an
empty value ~2 s later, and restarting it recovered them to Good on the new
birth (FillCount back to its birth-declared 1000, then counting)
- rediscovery fired exactly TWICE (once per authored scope: OtOpcUaSim/EdgeA
7 metrics, OtOpcUaSim/EdgeA/Filler1 3 metrics) and was then gated across
many subsequent births/rebirths — the anti-storm change gate working, and
EdgeB correctly filtered out as an unauthored scope
- tag editor: opens in SparkplugB (mode inference on reopen) with all four
descriptor fields populated; blank group → "A Sparkplug group ID is
required."; "Plant/1" rejected; "Node Control/Rebirth" ACCEPTED and saved
with the slash whole; dataType override persists and its key is ABSENT again
after selecting "(from birth certificate)"
Two things are NOT verified, and are recorded rather than claimed:
- Rediscovery is INERT in v3 and this is a platform gap, not an MQTT one:
nothing subscribes to IRediscoverable.OnRediscoveryNeeded and
DriverHostActor.HandleDiscoveredNodes hard-returns. A DBIRTH introducing a
metric does NOT change the OPC UA tree; redeploy. Verified from the driver's
log line only, exactly as far as it can be verified.
- A metric name containing "/" cannot be BROWSE-COMMITTED: the derived raw tag
Name is a RawPath segment and may not contain "/", so the spec-mandatory
"Node Control/Rebirth" is refused ("Row 3: Name must not contain '/'"). The
refusal is loud and all-or-nothing, never a silently mis-bound tag, and
Manual entry is the working path. Fixing it needs a name-sanitisation policy
with a collision answer, so it was recorded rather than guessed at.
Also left open + documented: an empty browse tree cannot arm a rebirth (the
scope comes from a tree click, and the session side already accepts a bare
{group}/{edgeNode} — only a UI path is missing); _canRebirth is captured at
browse-open; the tag editor injects the Plain-only payloadFormat key into a
Sparkplug blob (cosmetic — the factory routes on the tuple).
Suites: offline 1528 passed / 0 failed (581 Driver.Mqtt + 809 AdminUI + 138
Core.Abstractions); live 15/15 against the broker + simulator.
Docs: docs/drivers/Mqtt.md brought fully up to date for P2 (Sparkplug config
sub-object, both tag shapes, the ingest state machine, rediscovery, browse +
rebirth + Refresh, a Known-gaps table); Mqtt-Test-Fixture.md gains the simulator
and drops its "Sparkplug has no fixture" claims; infra/README.md §3 gains the
simulator row; CLAUDE.md gains the simulator endpoint facts; the tracking doc
marks MQTT/Sparkplug COMPLETE. docker-dev/docker-compose.mqtt.yml is the
isolated-rig overlay the gate ran on.
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
|
||
|
Joseph Doherty
|
8d9155682d |
fix(mqtt): browse-commit writes a bindable address + a Request-rebirth affordance
Two gaps the Task 23/24 review found, both blocking Task 26's live gate.
Gap 1 — browse-commit produced a silently dead MQTT tag. RawBrowseCommitMapper
had no `Mqtt` case, so a committed leaf fell through to the generic
`{"address": …}` key. Neither MqttTagDefinitionFactory entry point reads
`address`: the tag deployed clean and reported BadNodeIdUnknown forever, with
no signal at commit time. Predates Task 23 (Plain was affected too), but Task 23
built the Sparkplug metric tree precisely so an operator could browse and commit
a binding.
The address is a DESCRIPTOR, not a reference string, and it cannot be recovered
from the browse node id: `{group}/{node}[/{device}]::{metric}` where a metric
name legitimately contains `/` (`Node Control/Rebirth`) — the ambiguity
MetricSeparator's remarks already name. So the session STATES it, via a new
`AttributeInfo.AddressFields` seam, and the mapper reads it. Which keys are
emitted is also how the mapper learns Plain vs Sparkplug — the driver type
reaching it is just `Mqtt`, and the mode lives on the driver config. Key names
are single-sourced in the new `MqttTagConfigKeys` (producer, mapper, factory),
with the literals pinned by a test so a symmetric rename cannot silently unbind
already-persisted blobs. A leaf with no stated address is refused at commit in
words rather than committed dead.
Gap 2 — RequestRebirthAsync had no UI. Task 23 shipped it backend-only; Task 26
step 1 assumes the button, and Task 25's runbook notes the picker tree stays
empty until a birth lands, so it is the only way to fill it on demand. Added to
the /raw browse modal: scope = the clicked tree node (device/metric resolve up to
their edge node, group fans out and is refused whole past 32), an explicit
two-click confirm naming the resolved scope and its consequence, the outcome or
the refusal shown rather than swallowed. Offered only for a Sparkplug session
(new `IRebirthCapableBrowseSession.RebirthAvailable` — one session class serves
both modes, so a type test alone would draw a button that can only throw) and
only to a DriverOperator; the server-side gate remains the boundary.
Tests: MQTT 545 → 581, AdminUI 781 → 800. The round-trip tests feed the emitted
blob to the REAL factory and were falsified by mutating the emitted key name.
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
|
||
|
Joseph Doherty
|
64ec7aa43a |
feat(mqtt): Sparkplug birth-driven browser tree + scoped Request-rebirth action
Unseals the Sparkplug branch of the MQTT address-picker browser that Task 10 deliberately sealed shut, and adds the first (and only) sanctioned publish on a browse session. - MqttBrowseSession serves Group -> EdgeNode -> [Device] -> Metric in Sparkplug mode, decoded from observed NBIRTH/DBIRTH certificates (the only Sparkplug messages that name their metrics). Node-level metrics hang directly under their edge node -- no synthesised device folder, because the authored address tuple genuinely has deviceId = null for them. Metric node ids use a '::' separator: a metric name may contain '/', so slash-joining would make a node-level metric indistinguishable from a device folder. - AttributesAsync is purely birth-derived in Sparkplug mode. The plain path's UTF-8 inference / payload-snippet machinery does not run and no payload bytes are retained: a Sparkplug body is protobuf and would be reported as "(N bytes, binary)" for every metric in the plant. A datatype ToDriverDataType cannot map is reported as the Sparkplug type name, never coerced. - RequestRebirthAsync(scope) is the one publishing member, reached only by an explicit operator action. It routes through the counted PublishAsync chokepoint via a private RebirthTransport adapter, so PublishCountForTest still proves that OpenAsync/RootAsync/ExpandAsync/AttributesAsync/Observe/ DisposeAsync publish nothing -- now in both modes. A device or metric scope resolves up to its owning edge node (NCMD is node-addressed); group scope enumerates observed edge nodes and is refused whole past MaxGroupRebirthNodes = 32. - BrowserSessionService.RequestRebirthAsync gates on the same DriverOperator policy that gates the picker, evaluated server-side where the action happens rather than only at render time, fails closed, and Info-logs the scope and the published count. Exposed through the new IRebirthCapableBrowseSession contract so "does this session write?" stays a type question. - ToBrowseOptions' Last-Will landmine re-verified: MqttDriverOptions still carries nothing will-shaped (an NDEATH is a broker-published will and would be invisible to PublishCountForTest), now pinned by a reflection guard. Falsifiability: injecting a publish into RootAsync reddens the Sparkplug and plain passivity tests; double-publishing per target reddens all four one-NCMD-per-node assertions. 572/572 MQTT tests, 24/24 AdminUI browsing tests. Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW |
||
|
Joseph Doherty
|
cd0157a3b8 |
feat(mqtt): typed tag editor Sparkplug mode + validation
Task 24 (P2): replaces the P1 Sparkplug Validate() stub (always null) and the "not available yet" editor placeholder with real groupId/edgeNodeId/deviceId/ metricName authoring, mirroring MqttTagDefinitionFactory.FromSparkplugTagConfig in both directions -- required ids + optional deviceId, dataType/qos read strictly but only when present (dataType is optional: the birth certificate declares it). One rule is deliberately stricter than the factory: group/edge- node/device ids reject '/', '+', '#' (topic-segment characters a decoded incoming id can never carry, so an authored one that does can never bind); metricName is exempt since Sparkplug's own canonical names use '/' (e.g. "Node Control/Rebirth"). No FullName key is written -- TagConfig carries no identity under v3, and the plan's snippet asking for one was corrected per the brief. A SparkplugB tag now survives save/reopen because its descriptor keys re-infer Mode on load; there was never a 'mode' key to persist. Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW |
||
|
Joseph Doherty
|
92ba120964 |
feat(mqtt): MqttDriverForm + MqttDeviceForm — the driver/device config forms P1 omitted
The P1 live gate had to insert MQTT driver config directly via SQL: DriverConfigModal and DeviceModal both fell through to "No typed config form for driver type Mqtt" with no raw-JSON fallback, so broker host/port/TLS/credentials were unauthorable from the AdminUI. Task 12 built the *tag* editor; these are the driver + device surfaces. MqttDriverForm authors the whole MqttDriverOptions connection surface (host/port/clientId, TLS + CA pin, credentials, protocol version/clean-session/keep-alive, connect timeout, reconnect backoffs, mode, maxPayloadBytes, and the Plain sub-object). The Sparkplug sub-object stays P2 — a marked placeholder mirroring MqttTagConfigEditor's stub, with any existing sparkplug keys preserved untouched. The connection is authored on the DRIVER, not the device — unlike Modbus/S7/OpcUaClient and contrary to what docs/drivers/Mqtt.md said. DriverDeviceConfigMerger merges a device's keys up only when the driver has exactly ONE device, so a device-authored broker connection vanishes silently the moment a second device is added. MqttDeviceForm is therefore informational (the GalaxyDeviceForm shape) and round-trips DeviceConfig verbatim; it flags legacy connection keys left on a device by a pre-form deployment, because those still win via merge-up. Serialization goes through the ONE shared MqttJson.Options instance (Task 9's decision), never a fifth per-form copy — pinned by an assertion that an ordinal-only reader CANNOT bind the emitted blob, and by extending the fleet-wide DriverPageJsonConverterTests guard to resolve a form's serializer from an explicit external-instance registry when it has no _jsonOpts field. Dropping the converter from MqttJson.Options reddens 3 tests and leaves the symmetric round-trip green — the Task 9 lesson, reproduced. RawTags is stripped from the emitted blob (the deploy artifact owns it) and unknown top-level keys survive a load->save. Validation mirrors the driver's own [Range] bounds inline, and ToOptions() additionally clamps, so an ignored error still cannot persist a connectTimeoutSeconds:0 driver-brick. A non-blank clientId raises the P1 live-gate warning inline (fixed ids make redundant pair nodes evict each other while both report Healthy). AdminUI 761/761 green (was 730), TWAE-clean; Driver.Mqtt 266/266 green. Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW |
||
|
Joseph Doherty
|
b295b24419 |
feat(adminui): author + configure the Sql driver in /raw
The read-only Sql driver's runtime factory/probe and tag-side editors were wired, but the AdminUI could not author the DRIVER: the /raw "New driver" type list, the DriverConfigModal switch, and the legacy identity dropdown all omitted Sql, and no SqlDriverForm existed. Live-driving the AdminUI surfaced this. - Add SqlDriverForm.razor over the SqlDriverConfigDto shape: Provider (SqlServer-only in v1), required connectionStringRef (an env-var NAME, not a connection string — label is explicit), optional poll/operation/command timeouts, maxConcurrentGroups, nullIsBad. Enums serialize by NAME via JsonStringEnumConverter; a connection-string literal can never be authored (no such field is collected); rawTags (composer-owned) + allowWrites (inert, read-only v1) are never emitted. - Wire Sql into DriverConfigModal switch, RawDriverTypeDialog type list, and DriverIdentitySection legacy dropdown. - Add SqlDriverFormContractTests: the exact JSON the form emits constructs a driver through the real factory, missing connectionStringRef is rejected, and provider round-trips as the "SqlServer" name (never an ordinal). Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW |
||
|
Joseph Doherty
|
07a4a5ff5e |
docs(mqtt): P1 plain-MQTT milestone live-verified; endpoint recorded
Task 14 — the P1 milestone gate. Ran the live /run verification on a docker-dev
rig against the real Mosquitto TLS+auth fixture, and recorded the result.
The gate did its job: it found MQTT was unauthorable in production.
RawDriverTypeDialog's driver-type list is a hand-maintained array that nobody
added MQTT to, so the /raw "New driver" picker never offered it — with every
other layer (contracts, driver, browser, factory, host registration, typed tag
editor) complete and 266 green unit tests. Nothing tied that array to
DriverTypeNames and AdminUI has no bUnit, so no offline test could see it.
Fixed, plus RawDriverTypeDialogParityTests: a reflection parity guard that
fails for ANY DriverTypeNames entry missing from the picker. Verified
falsifiable — RED with "…cannot be authored from the /raw New-driver picker,
so they are unreachable in production: Mqtt" before the one-line fix.
A second gap is left OPEN and documented, not fixed (no task ever covered it):
MqttDriverForm / MqttDeviceForm do not exist, and DriverConfigModal/DeviceModal
have no raw-JSON fallback — so an operator can create an MQTT driver but cannot
author its broker endpoint or credentials. P1 is not operator-complete until
those two razor forms land. The gate authored config via SQL to get past it.
Live gate result (isolated 2-node MAIN stack, image built from this branch,
fixture at 10.100.0.35:8883, AllowUntrustedServerCertificate rather than
pinning the CA into the rig):
- typed MQTT tag editor renders and round-trips; Json shows the JSON-path
field, Raw/Scalar hide it; wildcard topic a/+/c blocked at save; data-type
list offers Float64 and no Double; qos/retainSeed absent on "(driver
default)" and qos:2 written as a number; isHistorized/historianTagname
survive a topic-only edit; SparkplugB renders the P2 placeholder and
switching back keeps Plain values; jsonPath is guidance not a gate in all
three shapes ($ seeded only for a brand-new blank tag, blank stays absent,
clearing saves fine)
- deployed, and both editor-written blobs resolved and served changing live
values through OPC UA (22.8 / 1629, StatusCode Good) — no BadNodeIdUnknown
- the bespoke #-observation browser drove a real broker session and rendered
the fixture's actual topic tree (line1/{counter,state,temperature},
noise/chatter, retained/seed); a Modbus device's picker still correctly
reports "Browsing unavailable"
Also found live and documented (not a code change): both nodes of a redundant
pair run the driver, so a FIXED clientId makes them evict each other forever —
the broker logs "already connected, closing old connection" and both nodes
reconnect every ~2s while still reporting Healthy. Unset (the default) is
correct; confirmed 0 reconnects/60s on both nodes after removing it.
Suites: offline 1134 passed / 0 failed (266 Driver.Mqtt + 730 AdminUI incl. the
3 new guards + 138 Core.Abstractions); live 7/7 against the fixture.
Docs: new docs/drivers/Mqtt.md + Mqtt-Test-Fixture.md (the per-driver + fixture
convention every other driver follows), MQTT rows in docs/drivers/README.md,
TestConnectProbes.md, root README.md, and infra/README.md §3.
CLAUDE.md drift corrected while adding the MQTT endpoints:
- the "every fixture carries project: lmxopcua" claim was false — only the
MQTT fixture does; the filter returns one stack, not the fleet
- lmxopcua-fix.ps1 is Windows-VM-only; on macOS drive the host over ssh/rsync
(and the docker-dev rig itself runs locally under OrbStack)
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
|
||
|
Joseph Doherty
|
ff62b62a55 |
refactor(mqtt): accept a blank jsonPath; guide with a seeded "$" instead
Review follow-up. Dropped the hard Validate rejection of a blank jsonPath under a Json payload: the runtime defaults it to the document root, which is the real "publisher puts a bare JSON scalar on the topic" case, so rejecting it made the editor refuse what the driver accepts — inverting "authoring surface accepts <=> publish accepts" — and blocked whole CSV-import batches, since this validator also gates RawManualTagEntryModal's review grid. Replaced with guidance: an UNAUTHORED tag (no topic AND no jsonPath) seeds the field with "$", so a fresh tag emits an explicit "jsonPath":"$" while an existing path-less tag keeps the key ABSENT and the driver defaults it. The wildcard-topic rule stays strict — a wildcard has no legitimate single-Tag interpretation. Also: omit a blank "topic" rather than writing "topic":"", and record why the _lastConfigJson guard diverges from the Modbus template — the landmine is a DERIVED, NON-PERSISTED UI FIELD INFERRED FROM BLOB CONTENT (Mode), which Task 24's Sparkplug field group will be tempted to add more of. Named the host-side dependency (RawTagModal only mutates through this callback) that keeps the staleness trade benign today. Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW |
||
|
Joseph Doherty
|
36abd871a1 |
feat(mqtt): typed tag editor + validator (plain mode)
Thin typed model over a preserved JsonObject key bag, mirroring the sibling <Driver>TagConfigModel template. Key names and strictness rules mirror MqttTagDefinitionFactory rather than inventing an editor-side schema; enums round-trip as NAMES (the factory reads them strictly by name). No FullName key: under v3 a tag is identified by its RawPath, which the factory keys the definition's Name off — a composed identity key here would be dead weight nothing reads. Mode is a UI-only sub-shape selector inferred from the blob (any Sparkplug descriptor key present) and never serialised — the driver takes Plain vs SparkplugB from its DRIVER config. Only Plain Validate() is implemented; the Sparkplug branch is a stub Task 24 fills, and its keys are preserved untouched. Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW |
||
|
Joseph Doherty
|
443b718158 |
feat(sql): typed AdminUI Sql tag-config model + validator (string enums)
SqlTagConfigModel + SqlRowSelectorModel mirror SqlEquipmentTagParser's accept/reject boundary byte-for-byte on the fields they own: model/type serialize as NAME strings (never numbers), KeyValue requires table+keyColumn+keyValue+valueColumn, WideRow requires table+columnName+a selector (where-pair OR topByTimestamp), Query is rejected, and unknown keys (top-level and nested rowSelector) survive load->save. Registered in TagConfigEditorMap + TagConfigValidator keyed off SqlDriver.DriverTypeName (DriverTypeNames.Sql is deferred to Task 11). A minimal placeholder SqlTagConfigEditor.razor lands the map entry now; Task 20 fleshes out the UI. The load-bearing test rounds editor output back through SqlEquipmentTagParser.TryParse (editor-output <=> parser-input agreement). Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW |
||
|
Joseph Doherty
|
132e7b63f6 |
feat(modbus-rtu): add Transport selector to the AdminUI Modbus driver form
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW |
||
|
Joseph Doherty
|
d15c613ef3 |
feat(mesh-phase5): dark-switch central telemetry ingest (Dps bridges | Grpc dialer)
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW |
||
|
Joseph Doherty
|
84fa2e1e43 |
fix(mesh-phase5): dial supervisor — re-dial on endpoint change, pin no-restart invariant, throttle skip warnings
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW |
||
|
Joseph Doherty
|
1104785c89 |
feat(mesh-phase5): central telemetry dial supervisor (discover + reconnect + feed sinks)
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW |
||
|
Joseph Doherty
|
d9de4e3019 |
fix(mesh): serve the artifact regardless of deployment status (Phase 3 live-gate deadlock)
The Phase 3 live gate deadlocked every FetchAndCache deploy: DeploymentArtifactGrpcService gated on Status==Sealed, but central seals a deployment only AFTER every node acks Applied, and a FetchAndCache node cannot ack until it has fetched the artifact — seal-needs-ack -> ack-needs-fetch -> fetch-needs-sealed. The node's fetch reached central and passed the shared-key interceptor, then got a clean NotFound; the #485 apply-failure path correctly kept last-known-good, but the deploy could never seal. Direct mode reads the same ArtifactBlob from SQL while the row is still AwaitingApplyAcks, so the serve path must too. Drop the Sealed gate: serve any deployment whose blob is non-empty (unknown id / empty blob still collapse to NotFound — existence-hiding + #485). Access is already gated by the interceptor, so there is no reason to hide a non-sealed deployment a node is legitimately applying. The Task 2 'non-sealed -> NotFound' test flips to 'non-sealed with a blob is served'. Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW |
||
|
Joseph Doherty
|
7d7de482b7 |
feat(mesh): central DeploymentArtifactService — stream the sealed artifact, NotFound-hide the rest
Streams a sealed deployment's ArtifactBlob to a fetching driver node in 128-KiB chunks (matching the LocalDb cache chunk size). Unknown id, a non-sealed deployment, and a zero-length blob all collapse to one indistinguishable NotFound — existence-hiding plus the #485 serve-side guard (never stream empty bytes as a valid empty config). The impl is named DeploymentArtifactGrpcService to avoid colliding with the generated DeploymentArtifactService container type. Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW |
||
|
Joseph Doherty
|
d8a85c3d89 |
feat(adminui): manual failover control on the cluster redundancy page
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW |
||
|
Joseph Doherty
|
5f72ff851d |
fix(adminui): make /admin/secrets interactive - wrap the Secrets.Ui page with a render mode (#483)
The Secrets.Ui RCL's routable page was routed directly, but this host's router is deliberately static (cookie SignInAsync needs SSR) with per-page @rendermode opt-in - a directive the RCL page cannot carry, because the other three family hosts render it under a globally interactive router where a nested render mode throws. Routing straight to the RCL page therefore rendered /admin/secrets with no circuit: it displayed, but every @onclick was silently dead. Fix: a host-side wrapper page (Pages/SecretsAdmin.razor) now owns /admin/secrets, carries the standard per-page InteractiveServer render mode, re-states the RCL page's own authorization policy (the router only enforces [Authorize] on the routed component, which is now the wrapper), and renders the RCL page as an ordinary child. The RCL assembly is de-registered from both AdditionalAssemblies sites (router + endpoint) so the route is unambiguous. Guards: SecretsPageWiringTests pins the render mode (the #483 regression), route parity with the RCL page, and policy parity; the page census in PageAuthorizationGuardTests classifies the new page and admits the secrets:manage policy. AdminUI.Tests 665/665. Live-verified on the rebuilt docker-dev rig with Playwright: /_blazor circuit negotiated on /admin/secrets and Add secret opens the editor (before the fix: zero interactive markers, no circuit, dead click). Closes #483. Claude-Session: https://claude.ai/code/session_01BL2Vu1ESDQ9SCN4gVKkdts |
||
|
Joseph Doherty
|
f1534920de |
test(secrets): G-2c guard AdminUI DriverConfig secret: ref round-trip (Task 9)
Verify + regression-guard that the AdminUI driver-config editor persists secret:/ env:/file: refs verbatim and never resolve-then-resaves cleartext (which would re-leak the secret into the config store, defeating G-2). Confirmed structurally safe: DriverConfig is persisted as an opaque JSON string via RawTreeService, which has NO secret-resolver dependency (only the DbContext factory) — resolution is impossible on the save path. Resolution stays confined to driver-instantiation / Test-connect (Tasks 7-8); GalaxyDriverBrowser resolves into a connect-scoped local only, never writing back. Three round-trip tests (OpcUaClient Password/UserCertPassword, Galaxy ApiKeySecretRef, env:/file: forms) exercise the real RawTreeService seam and assert byte-identical save→reload. No product change (no leak found). 662 AdminUI tests pass. |