A pending local ack can outlive its own delivery (sources that send no
Acknowledge back; a Clear now only carries it through), so a later failed
re-ack — or a stale Galaxy confirmation timing out after the alarm re-occurred
and was acked again — could revert an ack it does not own. MarkAcknowledged
now issues a sequence (0 when the ack changed nothing), carried on
RouteAlarmAck and echoed on AlarmAckFailed; TryRevertAcknowledge reverts only
on a matching sequence.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
FolderEventDeliveryPerfTests (Category=Perf, skipped unless OTOPCUA_EVENT_PERF=1)
reports per-alarm-report node-manager Lock hold and end-to-end delivery latency
for one equipment folder with N = 1/10/50/200 event items, ACL on/off, folder
subscribers publishing or stalled at a full queue; the latency of an i=2253
subscriber while folder subscribers stall; and a QueueSize sensitivity sweep.
Compiles against the pre-#855 tree for a before/after comparison.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
Adds an escalated-stream-fault test seam and a test: the live pump's fault
escalates (positive controls before and after), a superseded pump's late
fault after a reopen does not; the absence is asserted only once both
pumps' callbacks are known to have run (HasEnded). Verified to fail with
the filter disabled. The filter's comment now says the identity check does
the work and warns about a future session bump while Healthy.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
NativeAlarmProjector dropped the pending local ack on EVERY driver transition,
so an operator ack followed by the alarm returning to normal (a Clear carrying
the optimistic ack) inside the confirmation window made a later "not
confirmed" report a no-op — the condition stayed inactive+acked while Galaxy
showed UNACK_RTN. Only a transition that states the ack (Acknowledge,
ActiveAcknowledged, or an un-acking Raise/Retrigger/InactiveUnacknowledged)
now settles it; a Clear / same-message Raise / Unspecified update leaves it
revertible, and the revert projects inactive+unacked.
Tests: projector + host end-to-end (ack, Clear, confirmation fails -> inactive
+ unacked); tightened the confirmed-ack positive controls; pinned that the
confirmation receives the same request instance as AcknowledgeAsync.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
Each EventPump's fault callback now carries the pump's identity; a fault
from a pump that is no longer the live one (or belongs to an older registry
session) is logged at Debug and not escalated, so a stale pump's late fault
cannot fail a good replay now that a failure during Replaying fails the
attempt. The replay-retry warning includes the fault.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
1 PersistNodeAck wrote a Failed ack's FailureReason unbounded; the column is
nvarchar(2048), so on SQL Server the write failed forever, the ack retried
forever, the deadline deferred forever and every later deploy was refused.
- One shared bound, Configuration.FailureReasons.Truncate (MaxLength 2048),
used by the coordinator and DriverHostActor.UpsertNodeDeploymentState
(exception messages and degraded reasons).
- A non-transient DbUpdateException (not concurrency, no transient
DbException / timeout / socket / IO underneath) is POISON: the ack is
counted from memory with an Error, never retried.
- Deadline deferral on unpersisted acks is capped at 10 x the retry ceiling;
past it the outcome is decided from the acks held in memory.
2 A node restarting in the outcome window boots the cached revision (cache is
written before the outcome) and never acks. Cache-booted revisions
(BootstrapFromCache / TryBootFromCache) are now marked unconfirmed, so a
re-dispatch re-applies and acks the real outcome instead of a clean
short-circuit. docs/Redundancy.md corrected (replay only on the ConfigDb boot
path).
3 A lost dispatch re-driven near its deadline now gets a FULL deadline (a node
needs its whole outcome timeout + margin = ApplyDeadline, so any shorter
remainder timed out nodes that applied). No dispatched-at column: a second
restart recomputes from CreatedAtUtc and closes it instead (documented).
4 docs/Redundancy.md upgrade note: do not deploy while the central pair is mid
rolling-upgrade across this change.
Tests (all fail on the previous code): oversized Failed reason truncated (on a
SaveChanges interceptor that enforces the column like SQL Server); rejected ack
write counted from memory; bounded deadline deferral; full deadline on a
near-deadline re-drive; cache-booted revision re-applies on re-dispatch;
oversized degraded reason truncated on the node's own row.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
ReconnectSupervisor swallowed a transport failure reported while Replaying,
so a restarted event stream refused/ended a round trip after the replay
began still let the replay go Healthy over a dead stream (and the next
advise's re-report restarted at attempt 1 with no backoff). A failure
reported during Replaying is now remembered and turns that attempt's
success into a retry with backoff. ReplayAsync's synchronous dead-pump
throw yields to a teardown's cancellation.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
- Start the ack confirmation with Task.Run + ConfigureAwait(false) so it never
depends on the ReceiveAsync handler's ActorTaskScheduler (the PostStop
abandon-and-revert report must run after the actor stopped).
- DriverInstanceActorAckConfirmationTests: a confirmation that faults after the
handler returned is reported; one pending at actor stop is reported; a
confirmed ack reports nothing (positive control).
- Deterministic tracker matching test (Raise/Clear/Retrigger/other alarm do not
confirm; case-insensitive match does).
- AdminUI min/max on the confirm-timeout field; Galaxy.md documents the
reconnect, UNACK_RTN-as-Clear and RPC-budget limits.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
- ReplayAsync fails when its restarted pump's stream has already ended, so
the supervisor backs off and stays Degraded instead of going Healthy over
a dead stream (whose next advise re-report restarted at attempt 1 with no
backoff - a tight reconnect loop).
- ReconnectSupervisor.AttemptInProgress (reopen through replay); advises
wait for a stale pump's replacement only while an attempt is running, not
for a whole backoff (the state still reads Reopening/Replaying there).
- ReconnectSupervisor: _disposed is set under the state lock and re-checked
inside ReportTransportFailure, so a late report cannot start a recovery
loop that StopAsync already missed.
- EventPump.HasEnded is a flag set before StreamRequested is released, and
a stream that ends/faults on its first MoveNext is marked ended first.
- SubscriptionRegistry fast path: a miss now falls through to the locked
path (lookup + session + window check atomically) instead of a lock-free
re-lookup.
- Tests: replay over an immediately-ending stream fails; AttemptInProgress
across attempt/backoff; ReportTransportFailure after stop; the
reopen-window test uses a generous wait bound.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
- RefreshDirectItemsWithCut keys its "decided off Lock" set per (item,
condition), so a condition one item's walk saw is still decided for another.
- The deferral warning no longer blames slow folder subscribers (no folder of
ours defers since #855).
- FolderEventFloodWireTests' removal test now asserts the folder item got
nothing and the Server object exactly the pre-stall event (it passed with
the post-stall liveness re-check deleted).
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
mxaccessgw answers AcknowledgeAlarm OK both when the AckMsg write was
applied and when it was only sent (no OnWriteComplete; the reply then
carries a diagnostic). EvaluateReply treated both as success, so the H6
live gate saw a condition go Acknowledged while Galaxy never applied it.
- EvaluateReply returns Applied (no diagnostic) or Unconfirmed (diagnostic)
and logs the gateway diagnostic on every branch that carries one.
- GalaxyAckConfirmationTracker watches the alarm feed from before the RPC
and, for an unconfirmed reply, waits up to AlarmAck.ConfirmTimeoutMs
(default 10 s, 0 = old behaviour) for an Acknowledge/ActiveAcknowledged
transition; on timeout it refuses (BadTimeout + diagnostic).
- New optional IAlarmAcknowledgeConfirmation: DriverInstanceActor awaits it
after AcknowledgeAsync, off its mailbox and outside the resilience
pipeline; a failure is the existing #760 AlarmAckFailed revert.
- AdminUI Galaxy form carries the new knob; docs updated.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
- StreamRequestWait 1 s (under Tier-A Read 2 s / Subscribe 5 s budgets) and
a stale pump is only waited on while the supervisor is reopening or
replaying (or a restart is underway); in a reconnect backoff the advise
proceeds at once. The no-stream log is a rate-limited Warning while
Healthy, Debug otherwise.
- A current-session pump whose loop has ended is not a stream: if the
supervisor already reports Healthy (its fault was swallowed while it was
recovering) the failure is re-reported to start a new cycle.
- Subscribe/Read no longer start the pump directly (only
AwaitCurrentEventStreamAsync does, honouring the replay restart flag);
the teardown refusal is an explicit ThrowIfRuntimeStopping.
- SubscriptionRegistry.ResolveOrPark fast path: the handle lookup and the
open-window check were not atomic, so a subscribe that registered the
handle and closed its window in between got its initial value dropped as
stale (found by a stress run: the first event of a bulk advise lost). It
re-looks-up before declaring stale. Deterministic test via a seam.
- Tests: first Read on a fresh driver, replay of a data subscription.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
M1 DriverHostActor wrote its own NodeDeploymentState row Applied/null as soon
as the revision advanced, up to ~105 s before the address-space outcome.
The coordinator's recovery counts any non-Applying row as an ack, so a
coordinator restart in that window sealed CLEAN while the node was about to
report degraded (#601). The row now stays Applying until ReleasePendingAck
(or the no-publish-actor path) writes the final Applied, clean or with the
degraded reason. A node restart in the window replays the orphan Applying
row; /fleet shows Applying until the outcome (docs/Redundancy.md).
M2 Acks whose persist failed are tracked in _unpersisted (newest per node).
HandleDeadline persists that backlog first and defers its decision while
any remain, so a node that acked is never timed out as silent; PreRestart
re-sends them to Self so a restart (timers lost) does not drop them.
L3 A successful persist cancels the node's retry timer and drops its older
pending ack; a retry only fires for the node's current pending ack.
L4 A dispatch queued during Loading is sent with a fresh deadline however long
the outage lasted (never closed "Dispatch was lost"); the inline re-drive of
a genuinely lost dispatch arms the REMAINING deadline.
L5 A recovered row with a blank RevisionHash (re-dispatch) or blank NodeId is
closed PartiallyFailed with a reason instead of failing every load.
L6 Readiness carries PendingAckPersists + LastPersistError; the config-publish
health check is Degraded while Ready with a backlog.
L7 Ack-persist retries back off (shared Backoff); stack trace on the first
failure only.
L8 Terminal writes (Sealed / PartiallyFailed / TimedOut / failure reason) only
apply to a row still Dispatching/AwaitingApplyAcks.
Tests (all fail on the previous code): ControlPlane DbOutage — deadline does
not time out an unpersisted ack; unpersisted ack survives a restart; stale
retry does not overwrite a newer ack; queued dispatch through an outage longer
than the deadline is sent; malformed row closed and coordinator carries on;
readiness reports the persist backlog. Runtime DegradedAck — own row stays
Applying until the outcome. Host — Ready + backlog is Degraded.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
- Both plain ConditionRefresh paths (Server object and folder) skip a
condition a deploy removed or replaced between the off-Lock walk and the
queueing (the SDK base did not either; only the cut path checked).
- A failure delivering at one notifier hop is logged and the walk continues
to the remaining hops; a failure deciding the Server-object items withholds
only them.
- Test: a condition removed during a plain refresh (folder + Server object).
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
Round 1 replaced a stale-session pump from any advise path and disposed the
old one in the background; that could start a second stream while the old
one still held the gateway's single-subscriber slot, and a kept
current-session pump could be dead with no fault re-reported.
- EnsureEventPumpStarted reuses again; only ReplayAsync restarts the pump.
RestartEventPumpForReplay keeps a current-session pump only while its loop
is running (EventPump.HasEnded), and flags the restart so no advise path
starts a competing pump in the dispose gap.
- AwaitCurrentEventStreamAsync (bounded by StreamRequestWait) starts a pump
only when none exists, WAITS for the replay while the pump is stale or
restarting, waits for StreamRequested, and returns the session it verified.
SubscribeAsync (per #861 attempt), read-via-subscribe and the probe hook
issue and fence the advise under that session, so a reconnect after the
check is caught as a straddle and retried.
- Read: a deadline (not caller) cancel during the wait falls through to
per-ref results.
- Tests: reopen-window probe test now asserts the advise waits for the
replay's single new stream; first Subscribe/Read wait for the stream; the
fencing tests that advise in the window use a short wait bound; the
production-path seed test uses an empty galaxy (a real probe advise now
starts a stream against the fake endpoint).
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
- QueueFrozenReplay's verdict refuses a condition a deploy removed or replaced
since the cut (Server-object and folder), so the cut path cannot replay a
ghost or judge a replaced scripted alarm on its old folder.
- DeliverToNotifierItems resolves the #826 decision's item-independent part
(live condition, notifier check, scopes) once per hop; only the grant and
SDK role checks stay per item.
- A deferred delivery's drain starts on the pool, never inline under Lock.
- Test: a condition removed between the cut and its replay (folder + Server
object).
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
Review findings on 02503a4a (ConfigPublishCoordinator):
1 (HIGH) A recovered deployment whose every expected ack was already in
NodeDeploymentState (a seal whose SaveChanges failed, a fused node's own row)
was never completed: inside the deadline it waited for acks that had landed,
past it HandleDeadline's "race" guard returned without sealing — stuck in
AwaitingApplyAcks, refusing every later deploy. ApplyRecovery now completes
it (Seal / PartiallyFailed), and HandleDeadline completes a full ack set
instead of returning.
2 (MED-HIGH) The past-deadline recovery of a populated expected set ran
HandleDeadline inline before the stash replay, discarding on-time acks queued
during the outage. It is now self-sent, behind the replay. The zero-rows
past-deadline branch stays inline on purpose: no ack can count there, and a
self-sent deadline would time out a queued dispatch of that same row right
after publishing it.
3 (MED) A failed PersistNodeAck threw, restarted the actor and dropped the ack
(driver-only nodes never write their own row and do not resend). Acks are now
persisted before being counted, and a failed persist is re-queued on a timer.
The class remarks document that the Loading stash is node-local (lost on a
hand-over; queued dispatches are recovered from their rows).
Minor: MarkReady/Become(Ready) only after the recovery applied; a throw while
applying is a failed load (backoff) rather than a tight restart loop; a queued
dispatch matching the recovered Dispatching row logs Info, not the "lost
dispatch" Warning.
Tests (ConfigPublishCoordinatorDbOutageTests): fully-acked recovery seals /
partially fails inside and past the deadline (4 cases); queued ack applied
before a past-deadline recovery; failed ack persist retried. All 6 fail on
02503a4a.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
§12.1 gains the 2026-11-11 windev (VMware VM) perf table: idle p50 581 us
(MISS), kill latency after T+G 8-16 ms (PASS), kill both shards 2.12-2.14 s
(MISS by ~6 %), worker RSS 160 MB compiled / 36 MB warm-cache (PASS under the
revised 200 MB budget), host CPU +131 % vs InProcess (MISS, untuned).
It also records the first Windows run of Category=ScriptWorker: 107/0/2 from
C:\build, all 13 WorkerSoftClockTests cases (5 freezing a real worker with
NtSuspendProcess) green with no code change. From a user-profile directory
the restricted-identity isolation test fails because the restricted token
cannot read the worker dll there (profile ACL), which is environment, not a
defect.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
- EnsureEventPumpStarted replaces a pump created for an older registry
session (the reopen -> replay window still held the dead session's pump,
so an advise there lost its initial value and the replay skipped it);
RestartEventPumpForReplay keeps a pump already on the current session.
- SubscribeAsync, read-via-subscribe and ReplayAsync also await the
bounded StreamRequested wait before advising, not just the probes.
- TryEnsureEventPumpStarted tolerates a teardown flipping _runtimeStopping
mid-check; the probe hook honours an already-cancelled seed token.
- StreamRequested is documented as narrowing, not closing, the attach race.
- Tests: reopen-window probe test, EventPump.StreamRequested tests, and the
FixRound1 fresh-pump assertion now waits on a positive control.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
- QueueFrozenReplay re-asks each item's verdict right before each entry's gate
hold (Server-object and folder cut paths): a grant revoked between the
pre-Lock verdicts and the replay no longer lets the replay through. A denied
entry is also removed from the cut's re-sent set.
- ReportEventWithoutBlocking logs and returns on a delivery that faulted
inline instead of booking it as a deferral episode (which ran the drain and
ClearStaleRefreshCuts under the event-report gate while Lock was held).
- OnConditionReportEvent isolates failures per Server-object item.
- Tests: revocation between cut and replay (folder + Server object), throwing
hop not booked as a deferral; production-overload sampling inside Lock.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
When the data starts inside an interval (no start bound) and its first value is
Uncertain, the frozen 1.5.378.182 AverageAggregateCalculator integrated the
uncovered span as a ramp from 0 and divided TimeAverage by the whole interval:
GetRegionsInValueSet (ignoreBadData, sloped) overwrites the BadNoData start
region's status with UncertainDataSubNormal in its one branch without a not-Bad
guard. Live AggregateFilter therefore disagreed with HistoryRead and Part 13
§5.4.3.6/§5.4.3.8 ("No Start Bound: Calculate Partial Interval"); QP: Total
188.96 vs 163.96, TimeAverage 9.448 vs 10.931. SDK 2.0.1 stock does the same.
Owner-approved 2026-11-11.
- New app-owned CoveredTimeAverageAggregateCalculator subclasses the baseline
and recomputes only TimeAverage/Total, restoring the Bad status of a region
that starts at a Bad point (only the start bound can). Only such an interval's
value changes; status, timestamps, type and bits are the baseline's. Stepped
and TreatUncertainAsBad=true never reached the defect. CompatibilityAggregate-
Factory routes exactly those two IDs; copied SDK files untouched.
- Golden test: 0 fixture vectors change (every data set has a usable value at
-10 s), asserted. New sweep over late-start variants of every data set (cut
+5 s / +25 s, first non-Bad sample Uncertain, all directions/stepping/configs/
incremental): 150 / 142 of 384 change, each pinned to a baseline-derived
oracle (untouched baseline's value with that sample Good, its status/bits on
the variant itself) - never our calculator. Plus a hand-computed case.
- Live-vs-HistoryRead parity (TimeWeightedAggregator) forward + reverse, no
masks, with discrimination against the pre-#821 baseline; QualityMix now
compares QP's TimeAverage/Total with the live oracle on both SQL backends;
booted-runtime facts test expects 163.96 / 10.93.
- README recorded decision, ServerAggregateConfiguration remarks, oracle
remarks, docs/Historian.md and .claude/rules/historian.md updated.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
PreStart ran the in-flight recovery query synchronously. With the ConfigDb
unreachable when the singleton started, the throw became an
ActorInitializationException, the default strategy stopped the actor, the
ClusterSingletonManager never re-created it, and every later deploy hung.
- PreStart now only subscribes and kicks off an async recovery load piped back
to the actor. A failure retries with exponential backoff (1 s doubling to
30 s, forever) and never stops the actor.
- Until the load succeeds the coordinator is in a Loading behaviour that
stashes every message (DispatchDeployment logged as queued, ApplyAck too);
they are replayed in order after the recovered state is applied. Recovery
decisions (re-dispatch / time out) now run inline before the replay instead
of via self-tells, and a duplicate dispatch of the in-flight deployment with
a seeded expected set is ignored so queued acks are never reset.
- New ConfigPublishCoordinatorReadiness (admin-node DI singleton) +
"config-publish" ready-tier health check: Degraded while loading (with the
attempt count and last error), Healthy when ready or not hosted here.
Tests: ConfigPublishCoordinatorDbOutageTests (DB down at start -> actor alive,
Loading reported, deploy queued, DB returns -> load succeeds, queued deploy
dispatched and sealed; queued ack applied to the recovered in-flight set;
NotHosted after stop) and ConfigPublishCoordinatorHealthCheckTests.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
The gateway's StreamEvents with after_worker_sequence = 0 is a fresh stream
and never replays, and the event pump started only on the first
Read/Subscribe, so platform ScanState probes advised before then lost their
initial value (and a driver with no authored tags never got any host status).
PerPlatformProbeWatcher now awaits an ensure-event-stream hook before every
probe SubscribeBulk (seed, discover sync, reconnect ResubscribeStaleAsync).
The driver's hook starts the pump (refused while a teardown is in progress)
and waits, bounded, on the new EventPump.StreamRequested signal - completed
once the stream loop's first MoveNext has issued the StreamEvents RPC, or
when the loop ends - so the advise never precedes the stream request.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
The gateway's shared GalaxyHierarchyProjector ANDs template_chain_contains
entries, so the single request carrying both $WinPlatform and $AppEngine
matched no object and the probe watcher always seeded 0 platforms.
GatewayGalaxyPlatformSource now runs one paged sweep per template and
unions/dedupes by tag name. The tests use a fake gateway that applies the
projector's AND semantics (they fail on the old single request).
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
HeidenhainSession.Leaf's `case Lsv2Tool t` switch expression mixed long, int and
double? arms, so C# unified the natural type to double? and Tool/Number (Int64),
Tool/Index and Tool/AxisCode (Int32) were published as Double. Every arm in that
switch (and in the alarm-list, axes and feature-acquire switches in the same file)
is now boxed to object explicitly so no numeric arm can widen another.
New HeidenhainLeafRuntimeTypeTests asserts value.GetType() for every catalog value
leaf against its declared DataType (scalar + array), plus PLC/DATA binding coercion
for Int16/Int32/Int64/Boolean. Verified red on the old code (exactly the three Tool
leaves) and green with the fix.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
Condition events reaching one of our notifiers no longer go through the SDK
MonitoredNode2 channel: the walk serves the attached items itself, per item and
per event (audit guard, uncached INodeManager3 verdict, item gate/cut,
QueueEvent), as the Server-object path does. No notifier of ours defers any
more; the #838 deferral queue and the #854 cut stay as the safety net and
folder items share the cut (RefreshDirectItems, flag on and off). An event
whose walk suspends is marked deferred before it suspends.
Tests produce deferral with a notifier-stall probe instead of holding a folder
item's SDK lock (which would now block the reporter). New
FolderConditionRefreshWireTests; design note in docs/plans.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
TwinCATDriverProbe ran a first-phase TCP check against the AmsNetId's
first four octets on the AMS port (801/851). An AmsNetId is not an IP and
the AMS port is not a TCP port, so Test Connect timed out against every
real runtime (Z35474: dialled 5.118.56.93, an unrelated public host).
The probe now opens no socket of its own: it takes the driver's path,
AdsClient.Connect + ReadStateAsync through the local AMS router, bounded
by the probe budget (Task.Run + WaitAsync), and classifies failures as
no local AMS router / no route or target unreachable / timeout / other.
The degrade-to-green 'TCP reachability only' outcome is gone - with no
TCP check nothing was contacted, so a missing router is reported red.
Tests: the regression test listens on the AmsNetId-derived endpoint and
asserts no connection arrives (fails on the old probe); classification
and budget tests drive the handshake through an internal seam.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
The owner revised the per-shard worker idle RSS budget from 80 MB to 200 MB
+ scripts on 2026-11-11: compiles run in the worker, so Roslyn's code and
metadata stay resident (measured 159-187 MB) and no GC setting moves it.
The perf harness now reports both RSS rows against the 200 MB constant with
a PASS/MISS mark; A-3 records what the measurement showed.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
The frozen 1.5.378.182 StatusAggregateCalculator counts Uncertain regions as
Good under TreatUncertainAsBad=false, so live AggregateFilter PercentGood /
DurationGood disagreed with HistoryRead (Part 13 §5.4.3.31/§5.4.3.33, Mantis
0006166) whenever Uncertain data was present. Owner-approved 2026-11-11.
- New app-owned GoodOnlyStatusAggregateCalculator subclasses the baseline and
replaces only the PercentGood/DurationGood computation (Good regions only);
CompatibilityAggregateFactory routes exactly those two IDs to it. The copied
SDK files are untouched; the other 35 aggregates are byte-identical.
- Golden test: the 64 changed vectors (38 PercentGood + 26 DurationGood) are
exempted exactly — those whose baseline output differs from the same case's
baseline TreatUncertainAsBad=true twin — and pinned to that twin (baseline
evidence, not regenerated from the implementation); plus a full Good-only
pin over all 352 PercentGood/DurationGood vectors and a hand-computed case.
- Live-vs-history parity over Good/Uncertain/Bad mixes (no masks), with a
discrimination check against the pre-#809 baseline; the booted-runtime facts
test now expects 8000 ms / 40 %.
- SdkAggregateOracle: Run/RunLive = the registered factory; RunSdkAsIs = the
untouched baseline; its Part13GoodCalculator duplicate is removed.
- README (recorded decision), ServerAggregateConfiguration remarks,
docs/Historian.md and .claude/rules/historian.md updated.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
Owner decision 2026-11-11: /fleet/diagnostics "Faulted devices" counts DISTINCT
devices across the nodes of the selected node's cluster, Faulted state only.
- DriverHostActor: FaultedDevices = HostState.Faulted only (Stopped no longer
counted); new StoppedDevices + FaultedHostNames. Counting extracted to the
testable DiagnosticsFromHealth.
- DriverInstanceDiagnostics: StoppedDevices (default 0) and FaultedHostNames
(default null) are additive with defaults, so a pre-#786 sender's snapshot
still deserializes over Akka's default JSON serializer (pinned by a test).
- FleetDiagnosticsAggregation (pure): identity key = (driver-instance string
id, HostName), case-insensitive; a single-host driver / nameless pre-#786
count is combined by MAX across nodes, never summed. Cluster peers come from
enabled ClusterNode rows of the selected node's ClusterId.
- FleetDiagnostics.razor: tile fetches the cluster peers and shows the
distinct count + "n of m nodes answered"; per-driver table gains a Stopped
devices column.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
Owner decision 2026-11-11: certificateValidation.validateServerHostName stays
opt-in (unset = off). The AdminUI toggle moves from the "Subscriptions, limits &
discovery" panel to the Security panel beside mode/policy, with help text on the
NAT/IP caveat, IPv6 zone ids and the loose first-label match. Binding unchanged
(tri-state, "Default (off)" leaves the key absent). OpcUaClient.md states the
decision; drivers rule updated; source-scan test pins placement + caveats.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
Owner decision 2026-11-11 (Java parity): a genuinely empty observation on a
String/Reference or unauthored item is Good "" instead of BadNoCommunication.
Non-string items (numeric, bool, DateTime, arrays) keep BadNoCommunication -
the Agent supplied no value; BadTypeMismatch would wrongly blame the authored
type. The UNAVAILABLE sentinel is unchanged, and a structured observation with
no text stays BadNotSupported (structured check now precedes the empty check).
Parity matrix, quality-mapping section and drivers rule updated.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
With Reconnect.ReplayOnSessionLost=false a recreated gateway session carries none of
the old advises, so every pre-reconnect subscription went silently deaf: nodes kept
their last value as Good and health returned to Healthy (only a Warning log).
ReplayAsync now records the stranded subscriptions and publishes BadNoCommunication
(StatusCodeMap.BadNoCommunication, 0x80310000; value null — no driver value cache)
for every tag of each, straight to OnDataChange so LastSuccessfulRead is not stamped.
GetHealth reports Degraded naming the setting while any stranded subscription is
still registered; it clears on UnsubscribeAsync (the host's re-subscribe path) or
runtime teardown, and pruned ids never pin it. A subscribe after the reconnect is an
ordinary new-session subscription. With nothing else flowing, the comms-loss
watchdog re-initializes the driver after 90 s (a delayed replay).
Tests: Runtime/StrandedSubscriptionTests (6). Docs: drivers/Galaxy.md, which also
no longer claims the replay uses the gateway's ReplaySubscriptions RPC.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
Joseph Doherty