TwinCATDriverProbe ran a first-phase TCP check against the AmsNetId's
first four octets on the AMS port (801/851). An AmsNetId is not an IP and
the AMS port is not a TCP port, so Test Connect timed out against every
real runtime (Z35474: dialled 5.118.56.93, an unrelated public host).
The probe now opens no socket of its own: it takes the driver's path,
AdsClient.Connect + ReadStateAsync through the local AMS router, bounded
by the probe budget (Task.Run + WaitAsync), and classifies failures as
no local AMS router / no route or target unreachable / timeout / other.
The degrade-to-green 'TCP reachability only' outcome is gone - with no
TCP check nothing was contacted, so a missing router is reported red.
Tests: the regression test listens on the AmsNetId-derived endpoint and
asserts no connection arrives (fails on the old probe); classification
and budget tests drive the handshake through an internal seam.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
Owner decision 2026-11-11: certificateValidation.validateServerHostName stays
opt-in (unset = off). The AdminUI toggle moves from the "Subscriptions, limits &
discovery" panel to the Security panel beside mode/policy, with help text on the
NAT/IP caveat, IPv6 zone ids and the loose first-label match. Binding unchanged
(tri-state, "Default (off)" leaves the key absent). OpcUaClient.md states the
decision; drivers rule updated; source-scan test pins placement + caveats.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
Owner decision 2026-11-11 (Java parity): a genuinely empty observation on a
String/Reference or unauthored item is Good "" instead of BadNoCommunication.
Non-string items (numeric, bool, DateTime, arrays) keep BadNoCommunication -
the Agent supplied no value; BadTypeMismatch would wrongly blame the authored
type. The UNAVAILABLE sentinel is unchanged, and a structured observation with
no text stays BadNotSupported (structured check now precedes the empty check).
Parity matrix, quality-mapping section and drivers rule updated.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
- AdminUI MTConnect driver form: "Comms-loss confirm (ms)" in the Reconnect section, always written
(0 = first refusal, negative = off is never dropped), case-insensitive load, unknown keys preserved,
advisory at >= 90000 ms (the watchdog fires first). Form output byte-pinned and parsed through
MTConnectDriver.ParseOptions on the driver side.
- Driver: a confirmed refused-connection outage now annotates every told CONDITION quality-only
BadNoCommunication (state/ack kept, once per outage, UNAVAILABLE-Bad skipped); the first delivery
afterwards re-diffs all subscribed conditions so unchanged ones get a quality-only Good.
- docker-dev/docker-compose.mtconnect-gate.yml: throwaway Agent in its adapter's network namespace so a
stop is a genuine ConnectionRefused (a plain stopped container is a DNS failure = ambiguous).
- Docs: MTConnect.md comms-loss section + live-gate recipe, docker-dev README, drivers.md rule.
Refs #852
- A /sample or re-baseline failure whose chain holds SocketError.ConnectionRefused, unbroken for
CommsLossConfirmMs (new, default 2000; 0 = first refusal; negative = off), publishes every subscribed
value BadNoCommunication once per outage; the first delivery afterwards republishes all of them from
the index (unchanged values included). Timeouts/resets/DNS/pause keep the #527 watchdog contract.
- SampleCountCeiling clamps the adaptive raise to the /probe bufferSize (never below SampleCount).
- Docs: MTConnect.md comms-loss section + config key; drivers.md rule.
Refs #846
User decision: save, Test Connect, live browse and the deploy gate keep
refusing out-of-namespace credential references, but an ALREADY-DEPLOYED
driver must not fault at the upgrade restart or (Galaxy) at the next
gateway reconnect, since ReopenAsync re-resolves Gateway.ApiKeySecretRef.
- LegacyCredentialReferenceTracker (Core.Abstractions): the one, deprecated,
call-site-chosen compatibility path. Running Galaxy (InitializeAsync,
ReopenAsync, ack fallback) and OpcUaClient (session open) pass it and keep
the pre-#815 semantics (case-insensitive prefixes, Galaxy file:, OpcUaClient
literal pass-through) with a rate-limited Warning (driver/field/allowed
form, never the value) and a credential-compat:<field> diagnostics entry
(both drivers now implement IDriverDiagnostics). Browsers and probes pass
none and stay hard-fail; Heidenhain has none.
- Deploy-gate message names the migration.
- Upgrade preflight: CredentialReferencePreflightService (admin nodes, once
after ApplicationStarted, ConfigDb only, resolves nothing) logs a Warning
per Draft row / Deployed-artifact finding; the /raw banner shows them plus
Running drivers reporting warn-only use (driver-health diagnostics).
- docs/security.md: exact replacement table (incl. the old form default
env:MX_API_KEY, file:, un-namespaced secret:, casing changes), the
ReopenAsync reconnect behaviour, the warn-only window and its removal.
Co-Authored-By: Claude <noreply@anthropic.com>
SDK 2.0.1 checks the server host name in TWO places: Session.OpenAsync (after
the chain is trusted) and DefaultSessionFactory.CreateChannelAsync, against the
certificate in the GetEndpoints reply and before any security-mode test. opc-plc
sends a certificate on its None endpoint, so `connect -u
opc.tcp://10.100.0.35:50000 --validate-host-name` was refused on an
unauthenticated channel, where a host check proves nothing.
All three call sites now pass checkDomain only when the selected endpoint's
SecurityMode != None: OpcUaEndpointSelection.CheckDomainFor for the driver
(OpenSessionOnEndpointAsync, so the failover sweep too) and the AdminUI browser;
the same expression in Client.Shared ConnectToEndpointAsync (shared by
failover). New live tests: driver None + flag on vs :50000 reads; browser None +
flag on vs the NAT fixture browses; the secure + flag refusals still hold.
Docs: name both check sites; a zone-qualified IPv6 host never matches (FindDomain
compares the zone too), so link-local needs validateServerHostName=false; the
match is loose (first label alone, subject DC= parts count, no wildcards), which
caveats the CA recommendation.
Live gate against the cppagent 2.7 fixture: count=16384 with bufferSize
16384 streams; 16385 is OUT_OF_RANGE ('count' must be less than 16385).
Warn only when SampleCount > bufferSize, pin both sides of the edge
against the live Agent, and correct the #804 wording that said 'at or
above'.
- ALARM: selectors (HeidenhainAlarmSelector, Contracts): ALARM:*, ALARM:OTHER,
ALARM:CLASS=<r>[/GROUP=<r>][/NUMBER=<r>] (<r> = n | lo..hi; negative numbers allowed).
An ALARM: address and the cross-driver alarm object only work together — the factory
refuses either alone, so editor, save path, CSV and deploy inspector agree. Data type
fixed Boolean; never a value (ReadAsync BadNotSupported), never in a data subscription.
- HeidenhainDriver implements IAlarmSource: one condition per ALARM: tag at its RawPath,
driven by the SAME allowlisted R_RI 27/28 walk on the control's single loop, on the new
Polling.AlarmMs cadence (default 2000 ms, only for controls carrying an ALARM: tag).
FOCAS #647 transition rules (Raise / Retrigger / Clear), identity = class+group+number+text,
deterministic display order, told-record on the driver instance, recorded only while a
handler listens. A failed walk (refusal, overflow, comms loss) is quality-only, never a clear.
- Acknowledge is LOCAL-ONLY: AcknowledgeAsync is a no-op success (FOCAS/MTConnect posture);
Lsv2ReadOnlyPolicy is unchanged — no ack or write request exists.
- Opt-in per tag, no driver flag (FOCAS #647 / MTConnect #626 precedent); Alarms/* arrays unchanged.
- IRediscoverable: a reconnect whose R_VR identity (model / NC / PLC / options) differs from
the previous session raises OnRediscoveryNeeded once (advisory re-browse chip). No extra traffic.
- AdminUI: Heidenhain joins NativeAlarmModel's alarm drivers; the typed editor fixes ALARM:
tags at Boolean and seeds/drops the alarm object with the selector; driver form gains
"Alarm conditions (ms)". (HeidenhainDriverFormModel also carries the #830 credential-notice change.)
Tests: HeidenhainAlarmTests (grammar, pairing, rules, simulator e2e with the captured iTNC 530
alarm record, local-only ack = zero bytes sent, quality-only outage/refusal, rediscovery),
Runtime.Tests HeidenhainNativeAlarmEndToEndTests (real DriverHostActor condition), a
DraftValidator case, and the NativeAlarmDriverSetGuard now scans the Heidenhain driver.
docs/security.md gains the canonical table of per-driver namespaces, the five
enforcement seams, the out-of-scope cases (appsettings ${secret:}, Sql
connectionStringRef) and the migration steps for existing configs. Galaxy,
OpcUaClient, Heidenhain, Configuration and driver-specs docs, the Galaxy
options XML docs, the drivers rule file and the docker-dev compose comment
point at it. docker-dev's env:GALAXY_MXGW_API_KEY stays valid (allowed legacy
prefix), so no rig change is needed.
Co-Authored-By: Claude <noreply@anthropic.com>
#816 finding: the SDK checks that the server certificate names the host only
when a session is created with checkDomain:true. The driver, the AdminUI
browser and Client.Shared all called the 8-argument
DefaultSessionFactory.CreateAsync, which forwards checkDomain:false — so no
host-name check ever ran (why a trusted NAT cert for *.invalid browsed fine
over an IP in #813). When enabled the SDK (Session.OpenAsync ->
ValidateDomains -> FindDomain) compares ConfiguredEndpoint.EndpointUrl.IdnHost
— the CONFIGURED host, because OpcUaEndpointSelection/EndpointSelector
rewrote the advertised one — against the cert's DNS/IP SANs; secured
sessions only, and the auto-accept handler accepts a mismatch.
Policy: certificateValidation.validateServerHostName, tri-state. Unset =
OpcUaCertificateValidationOptions.DefaultValidateServerHostName = false, the
pre-#816 behaviour, so nothing changes on upgrade; true = validate the
configured host; false = explicit NAT/port-publish opt-out. Threaded into the
driver, the AdminUI browser (same JSON) and the AdminUI form (a select that
keeps "unset" unset), Client.Shared ConnectionSettings.ValidateServerHostName
and the CLI --validate-host-name. A driver refusal names the opt-out.
#818: the NAT fixture's /app/pki is on the opc-plc-nat-pki volume (verified:
same thumbprint across --force-recreate), its PUBLIC cert is committed as
Docker/nat/opc-plc-nat-server.der, and NatPublishedEndpointBrowseTests run
every secure browse on a throwaway PKI (internal browser seam): refusal with
nothing trusted, positive with the cert trusted (unset/false host check), and
a BadCertificateHostNameInvalid refusal with the check on. The trusted cert is
OPCUA_NAT_SERVER_CERT or the committed one (skip on thumbprint mismatch);
OPCUA_NAT_SERVER_CERT_TRUSTED is retired. CI exports its throwaway NAT
container's public cert. ServerHostNameValidationTests pin the driver against
the plain opc-plc. MIN_EXECUTED not raised (needs a hosted run): +6 in
v2-integration (440 -> 446), documented in scripts/ci/README.md.
allowWrites is no longer inert: SqlDriver implements IWritable, default off.
- Gates (outermost first): node Writable + WriteOperate (server), driver
allowWrites, the tag's own TagConfig "writable": true (strict JSON boolean;
anything else refuses the tag, and the deploy gate says why), and a model that
names exactly one row — KeyValue, or WideRow by where-pair. topByTimestamp and
Query are BadNotWritable.
- SqlWritePlanner: the only statement a write can become is
UPDATE <table> SET <value col> = @v WHERE <key col> = @k, built from the
catalog-gate-canonical identifiers (dialect-quoted) with value and key bound;
value-before-key marker order so positional ODBC binds correctly. No authored
write SQL, INSERT, UPSERT or procedure.
- Executed in a transaction that commits only when exactly one row was touched:
0 rows -> BadNoData (never inserts), >1 -> rolled back, BadConfigurationError,
unknown count -> rolled back, BadNotSupported. Bounded by operationTimeout;
provider errors -> BadCommunicationError; health untouched.
- Discovery advertises Operate only where a write could succeed.
- AdminUI: driver form's Allow writes switch is live; tag editor gains a
per-tag write switch; model validates writable strictly (parity corpus).
- Factory no longer warns "allowWrites ignored"; it logs whether writes are on.
- Tests: SqlWriteTests (planner SQL/bind order/injection/coercion, every gate,
readback, absent key, two-row rollback, gate-rejected tag, discovery);
MySqlReadTests write legs against InnoDB (keyed row only, two-row rollback,
server-side grant refusal, default-off). Seed adds a setpoints table and the
one UPDATE grant.
(lmxopcua#753)
Claude-Session: https://claude.ai/code/session_01GT67AEHd2Acv1YPwGfXEoV
R06:M-5 made Sparkplug *Array leaves unbindable because the ingestor refused
them. The ingestor now decodes the packed bytes_value of all 13 array types
(new SparkplugArrayCodec: LE fixed widths, int64-ms DateTime, uint32-count +
MSB-first BooleanArray, NUL-terminated UTF-8 StringArray; golden vectors are
the spec's examples, reproduced byte-for-byte by SparkplugNet 1.3.10) and
publishes a typed 1-D array through the scalar coercion, all-or-nothing.
Shape uses the fleet's one array model: the tag's platform isArray/arrayLength
keys (ValueRank=1, ArrayDimensions=[arrayLength] or [0] = variable length).
The driver reads them with TagConfigIntent's exact semantics and never rejects
on them, so composer, driver, authoring model and deploy inspector agree
(MqttArrayShapeParityTests). Shape mismatch (array metric on a scalar tag, or
the reverse) is BadTypeMismatch - a String tag no longer gets the packed
buffer as base64; a malformed body or a length differing from a declared
arrayLength is BadDecodingError (MTConnect #627 verdict). Template/DataSet
members of an array type take the same path. Arrays stay read-only (encoder
refuses them; MQTT is not in DriverArrayWriteSupport).
Browser: array leaves are bindable again and state isArray in AddressFields;
the commit mapper writes "isArray": true (no arrayLength). Discovery reports
IsArray/ArrayDim. Docs: Mqtt.md "Array metrics", design table, drivers rule.
Tests: codec (golden + malformed), ingest through the real codec + Dispatch
(the project's MiniBroker never forwards a PUBLISH, so there is no in-process
broker harness), browse, discovery, commit mapper, parity corpus. Mutating the
fix back out fails 18 MQTT + 9 AdminUI tests.
Claude-Session: https://claude.ai/code/session_01GT67AEHd2Acv1YPwGfXEoV
Keeps the root CLAUDE.md lean by lazy-loading per-area detail (drivers, topology,
data-plane auth, alarms, historian) only when matching files are touched.