The worker budgeted a DrainEvents reply against the negotiated pipe frame
maximum less one 64 KiB reserve, but the gateway returns that same
MxCommandReply verbatim through Invoke, where MaxSendMessageSize applies. The
two limits were coupled only from below (pipe >= gRPC + reserve), so any
configuration the validator permitted with a wider gap let the worker pack a
reply the pipe carried and the gRPC layer then refused with ResourceExhausted --
after Drain had already removed the events from the worker queue, losing them to
both the caller and the event stream.
Option (a) from the finding: close the coupling at both ends.
- GatewayOptionsValidator adds the upper half of the headroom rule
(Worker:MaxMessageBytes <= Protocol:MaxGrpcMessageBytes + 2 x reserve), with a
message naming the DrainEvents budget as the reason and the two knobs to move.
- WorkerPipeSession.ResolveDrainReplyByteBudget subtracts the reserve twice --
once for the pipe frame, once so the MxCommandReply wrapper clears the gRPC
send cap -- keeping the MaxMessageBytes/2 floor that makes small frame maxima
usable.
The two changes are load-bearing for each other: the validator band is what
makes "frame max - 2 x reserve" provably at or below the gRPC cap, and the
doubled subtraction is what makes the band sufficient.
Docs updated in the same change (GatewayConfiguration.md both option rows plus
the headroom prose, WorkerFrameProtocol.md drain budget, gateway.md DrainEvents
byte axis). Tests: new GatewayOptionsValidatorTests cases for the upper bound
(reject) and both edges of the band (accept); GatewayOptionsTests' override case
now moves both message-size knobs together, since the band makes moving one
alone illegal.
The worker half cannot be built on macOS; verified on windev separately.
Committed together because the two changes share the same doc paragraphs (the ACL
section of GatewayDashboardDesign.md, the GroupToTag / AllowAnonymousLocalhost rows
of GatewayConfiguration.md, and CLAUDE.md's authentication paragraph), and splitting
them would leave one of the two describing behaviour that does not yet exist.
SEC-41 — tag grants no longer trusted from login-stamped claims
---------------------------------------------------------------
DashboardSessionAcl read the zb:dashboardtag claims stamped into the cookie at
login. GatewayOptions binds once at startup, so applying a GroupToTag edit needs a
restart — but the restart does not clear the auth cookie (data-protection keys
persist), so a browser returning afterwards re-authenticated with tag claims
resolved under the OLD map. A revoked grant therefore survived on the cookie seam
for the sliding 8-hour idle life, renewable indefinitely by activity, while the
hub-token seam had no such gap because its mint re-resolves.
CanViewSession now re-resolves the grant on every subscribe from the caller's
mxgateway:ldap_group claims through DashboardGroupTagMapping.MapGroupsToTags
against the currently bound map — the same one call HubTokenService.Issue makes.
Fallback (documented on the class and in the design doc): a principal carrying NO
group claims falls back to its stamped tag claims. That arm exists for the
hub-token principal — HubTokenService.Validate rehydrates roles and tags but not
groups, so re-resolution already happened at mint, one lifetime ago at worst. It
cannot re-open the cookie hole: DashboardAuthenticator stamps group and tag claims
from one group list, so a cookie principal holding a tag claim always holds the
groups it came from, and a login yielding no groups yields no tags. A principal
with neither kind of claim stays an empty-grant Viewer.
SEC-40 — the alarm feed requires a real authenticated dashboard role
--------------------------------------------------------------------
AlarmsHub sat behind HubClientsPolicy, which the read-only environment bypasses
satisfy, so an anonymous-localhost caller or a Mode=Disabled deployment received
galaxy-wide alarm metadata — alarm reference (a full tag path), state, severity,
category, area, acknowledging operator — for the whole subscription expression.
Decided: tighten the gate, keep the scope. New AuthenticatedDashboardRoleRequirement
+ its handler, and a MxGateway.Dashboard.Alarms policy built from it. Because
DashboardAuthorizationHandler is typed to DashboardAuthorizationRequirement, it is
never invoked for the new type, so neither Authentication:Mode=Disabled nor
anonymous localhost can satisfy the policy — the same structural device the mounted
Secrets UI already relies on. The policy keeps both schemes so external hub clients
can still authenticate with a bearer token, and DisableLogin auto-login is
unaffected (it mints a genuinely authenticated both-roles principal).
The /alarms page carries the same policy, not just the hub: it reads the same
central monitor in process, so gating only the hub would have left the disclosure
one navigation away. The side rail hides the Alarms link for callers the policy
denies, matching the Secrets link precedent. AlarmsHubPublisher is unchanged and
stays unfiltered by design — audience is decided at hub admission, and the monitor
carries no per-session provenance to narrow by.
Alarm metadata deliberately remains galaxy-wide for authenticated Viewers: an
AlarmFeedMessage has no session id or owning key for the SEC-25 tag intersection to
work against, and equating a visibility tag with an alarm-reference prefix would
turn GroupToTag into the data-access constraint it explicitly is not.
Tests
-----
DashboardSessionAclTests: the SEC-41 regression — a cookie-style principal whose
stale tag claim is no longer granted by any of its groups under the current map is
denied; plus the allowing direction (including with no stamped tag at all, which
proves the decision comes from the groups), the ignore-case corner, group claims
that map to nothing, and the hub-token fallback asserted against an EMPTY map so
dropping the fallback would fail loudly.
AlarmFeedAuthorizationTests (new): both handlers run together in the most permissive
environment (Mode=Disabled + loopback + AllowAnonymousLocalhost) do not satisfy the
alarm requirement, with the bypassable requirement as the control so the negative
cannot pass because the bypass was misconfigured; authenticated Viewer/Admin do
satisfy it; an unauthenticated role claim does not; the registered policy carries
the non-bypassable requirement and both schemes; and both readers — the hub type's
[Authorize] and the /alarms endpoint metadata — carry it.
SecretsNavRenderTests: registers the new policy (an unregistered policy name throws
rather than denying in an AuthorizeView) and gains the Alarms-link negative/control
pair.
Verified: dotnet build src/ZB.MOM.WW.MxGateway.NonWindows.slnx (zero warnings);
filtered run of the touched classes — 92 passed, 0 failed.
GatewayBrowseScopeProvider resolved `identityAccessor.Current?.EffectiveConstraints
?? ApiKeyConstraints.Empty`, so an absent ambient identity produced an empty
BrowseSubtrees list — which the shared GalaxyRepository library reads as "no
scoping". The control's fail state was therefore open: any future path reaching the
library's galaxy service without GatewayGrpcAuthorizationInterceptor having pushed
the identity would silently hand a browse-scoped key the full hierarchy, with
nothing failing and nothing logged. A constraint-narrowing control's absence is
invisible in normal operation, which is what made the honest "safe only because the
global interceptor runs first" comment insufficient on its own.
The provider now distinguishes the two states the old expression collapsed:
- authenticated key with no BrowseSubtrees constraint -> empty list, unscoped
(unchanged, and now asserted in its own test rather than implied);
- no ambient identity with Authentication:Mode=ApiKey -> log a warning naming the
broken ordering invariant and throw RpcException(PermissionDenied);
- no ambient identity with Authentication:Mode=Disabled -> unscoped, because
nothing authenticates there so no key and no constraints exist to scope by.
The registration-order comment at GatewayApplication.cs now says the ordering is
still required but no longer silently trusted.
Tests: GatewayBrowseScopeProviderTests gains the PermissionDenied case and the
Disabled-mode case alongside the unconstrained-identity one.
GalaxyRepositoryHostWiringTests phase 1 now pushes an identity carrying no
BrowseSubtrees instead of pushing none — that, not an absent identity, is
production's unscoped case.
Docs: docs/Authorization.md's constraint section states the two-state distinction
and both fail behaviours under browse_subtrees.
EnsureDistributorCreated read a null _eventDistributor as "not created yet",
which is true before MarkReady and false after DisposeAsync nulled it. An
attach that passed its readiness gate while the session was still Ready and
then lost the CPU across the whole close + dispose therefore built a
REPLACEMENT distributor: startNow came back false because the pump-start flag
is a one-way latch, so the subscriber registered on a distributor whose pump
never starts and whose channel is never completed, and EventStreamService
blocked in WaitToReadAsync until the client's own deadline — no error, no log,
no metric, the backlog gauge reporting 0 forever. This is the disposal-side
twin of the premature-attach poison GWC-27 closed.
DisposeAsync now sets _eventDistributorDisposed under _syncRoot in the same
section that nulls the distributor, and EnsureDistributorCreated throws
SessionManagerException(SessionNotReady) when it is set. The attach paths'
existing catch/rollback releases the subscriber slot, so a second attempt
still reports SessionNotReady rather than EventSubscriberAlreadyActive.
StartDashboardMirror is the one caller that is not an attach: it abandons the
mirror (releasing its loop token source) instead of propagating, so MarkReady
stays total. Losing that race previously left a started orphan distributor
behind, so this path strictly improves too.
Test: AttachAfterDisposeThrowsSessionNotReadyInsteadOfRegisteringOnANeverPumped-
Distributor covers all three attach entry points plus the rollback, and fails
on the pre-fix code. docs/Sessions.md records the disposal end of the
one-distributor-per-session rule.
Sweep code/doc comments citing unregistered GWC-30/GWC-31 (2026-08-15 perf
pass) to PERF-02/PERF-07/PERF-22, keyed to task numbers in
docs/plans/2026-08-15-perf-review-remediation.md; add a PERF-ID register
table to that plan. Genuine cycle-2 GWC-30 citations (gateway-side frame-
reader 4-byte prefix fix in Server/Workers/WorkerFrameReader.cs and its
test) are left untouched.
Add a line to REVIEW-PROCESS.md reserving the GWC/WRK/IPC/SEC/CLI/TST
prefixes for the archreview domain registers.
Tracker housekeeping per archreview/2026-08-19/00-overall.md:
- GWC-16 -> Won't fix (rationale: PERF(followup) comment documents the
double session lookup as measured-negligible, deliberately not collapsed)
- IPC-08 -> Done (closed by 7c1ea12/a1a38b5; residual tracked as IPC-34)
- IPC-31 -> Done (superseded by GWC-28's write-time sequence stamping)
- TST-06, TST-17 rows refreshed per cycle-3 60-testing-docs-gaps.md
- WRK-31 (and defensively WRK-29/30) registered as reserved/do-not-reuse
interim IDs burned by e913dab, in both the cycle-2 tracker and the
cycle-2 worker remediation doc
Flip Batch C to Done in archreview/2026-08-19/remediation/00-tracking.md.
Worker-side files (Worker/Ipc/WorkerFrameReader.cs, WorkerFrameWriter.cs)
are comment-only edits, unverified here (net48 x86, windev-only build).
.NET/Go/Python/Rust clients (plus Contracts, which releases in lockstep
with the .NET Client) move 0.2.0 -> 0.2.1; Java moves 0.2.1 -> 0.2.2. This
starts the next release train the finding recommended, since post-publish
source changes (including the Python connect() event-loop fix, a8f86b5)
had been sitting at already-published version numbers for nine days with
nothing recording the divergence.
- Note the pypi 0.2.0 connect() defect and its supersession by 0.2.1 in
clients/python/README.md and docs/ClientPackaging.md.
- Add scripts/check-client-versions.ps1: a PR-time guard that finds each
client's latest publish tag (clients/go/vX.Y.Z for Go, the only client
with a git tag; the other four publish straight to a registry with no
tag, so the check reports "no tags found" and passes for them) and fails
if clients/<lang> changed since that tag while the version constant
still equals the tag's version. Wired into .gitea/workflows/ci.yml's
portable job next to the codegen freshness checks (needs fetch-depth: 0
for tag history).
- Mark remediation batch A Done in
archreview/2026-08-19/remediation/00-tracking.md.
Verified on macOS: dotnet build clients/dotnet/...slnx (pass), cargo check
--workspace (pass), python -m pytest (168 passed, 1 skipped), gradle test
with JDK 17 (pass, no generated-tree churn to revert this time), gofmt -l
+ go build ./... + go test ./... (clean), and
scripts/check-client-versions.ps1 via pwsh (pass; also verified it fails
correctly when a version constant is rolled back).
DisposeAsync is the third path that completes the outbound, staging and event
channels, but unlike MarkClosed and SetFaulted it left _state untouched. A
client disposed while still Ready therefore kept reporting
IsTerminalState() == false, so a read loop already inside DispatchEnvelope when
the staging channel was completed took StageWorkerEvent's overflow arm: a
spurious ProtocolViolation fault, a worker-event-staging overflow metric, a
redundant kill and a WorkerStopped("ProtocolViolation") metric during an
intentional teardown — on exactly the path an operator inspects after a failed
SessionManager.OpenSessionAsync.
DisposeAsync now takes _syncRoot once, claims _disposed there, and transitions
to Closed only when the state is not already Closed or Faulted, so a
dispose-after-fault keeps Faulted and a double dispose is a no-op. Because the
transition is now real, the dispose path records the worker stop through the
existing RecordWorkerStoppedOnce latch, which also stops the running-worker
gauge leaking when a Ready client is disposed without a prior close or fault.
MarkClosed is deliberately not reused: it would overwrite Faulted with Closed
and would re-run a teardown sequence DisposeAsync performs itself.
The StageWorkerEvent XML doc now names all three completion paths.
Test: DisposeAsync_WhileWorkerIsEmittingEvents_ClosesWithoutFaultingOrOverflowing
disposes a Ready client mid-event-stream and asserts Closed state, zero faults,
zero queue overflows, zero kills and exactly one recorded worker exit. It fails
on the pre-fix code.
ReportWatchdogFaultIfNeededAsync built the StaHung fault with
CommandMethod = snapshot.CurrentCommandCorrelationId, so the wire
fault's command_method field carried an opaque correlation id (or
empty) instead of a method name -- a consumer reading CommandMethod as
a method name got a confusing value. Use a stable "Watchdog" label and
fold the stuck command's correlation id (when present) into the
diagnostic message instead. No test asserts CommandMethod for the
StaHung fault; the existing assertions only check Category and that
DiagnosticMessage contains "STA activity is stale", both unchanged.
Write-completion correlation is recency-based per (server_handle,
item_handle): OnWriteComplete carries no per-call token, so the executor
attributes the first completion whose version exceeds a pre-call baseline
to that write. A stale completion from an earlier timed-out write to the
same handle could ride the next write's reply if it was already queued
when the baseline was captured.
Add CaptureCompletionBaseline (Write, Write2, WriteSecured,
WriteSecured2) to run one pumpStep() immediately before snapshotting
CurrentVersion, so an already-queued stale completion folds into the
baseline instead of being available to the next wait. This narrows, but
per the finding cannot close, the correlation gap -- a completion queued
after the pump step and before the COM call returns (or during the wait)
is still indistinguishable from the new write's own completion; closing
it needs an MXAccess-side correlation token that does not exist.
Rewrite the AwaitWriteCompletion doc comment to state the recency-based
contract honestly instead of implying exact per-call matching, and add
the same contract to docs/MxAccessWorkerInstanceDesign.md's
write-completion section.
Deferred: the reply-field comment in
src/ZB.MOM.WW.MxGateway.Contracts/Protos/mxaccess_gateway.proto is not
edited here. A comment-only proto change still requires regenerating
every generated artifact (C#, Go, Python, Java, Rust, protoset) in the
same commit per repo convention, and this macOS box cannot verify all
five client generator pins together for a Low-severity doc-only change.
The contract is documented in MxAccessWorkerInstanceDesign.md instead;
the existing proto comment ("concurrent writes... can swap rows") is not
wrong, just less precise than the new doc section.
glauth.md's OPC-perm group table and pre-provisioned-users table described a
directory that no longer exists: all five OPC-perm gids were off by 100
(5501-5505 vs actual 5601-5605), and the user table listed
readonly/writeop/writetune/writeconfig/alarmack accounts that scadaproj's
shared GLAuth (config.toml) never provisioned. The real per-role testers are
opc-readonly/opc-writeop/opc-writetune/opc-writeconfig/opc-alarmack (renamed
to avoid a cn= case-collision with their group), and every dev user's
password is "password" per config.toml's own comment and passsha256 (not
admin123). admin itself is no longer a member of any OPC-perm group in the
shared directory (only GwAdmin + OtOpcUa-Admins) - multi-role is the actual
"covers every gw capability" account now.
The wrong admin123 default had propagated into
MXGATEWAY_LIVE_MXACCESS_WRITE_SECURED_PASSWORD (docs/GatewayTesting.md) and
the WorkerLiveMxAccessSmokeTests.cs literal/comment attributing the rig's
GLAuth-bridged ArchestrA identity - both corrected to password. Also made
the WriteSecured parity test log (never assert) whether AuthenticateUser
succeeded or was rejected: MXAccess parity means a bad credential is a
legitimate failure reply, so it must not fail the test, but a stale rig
credential was silently degrading the nightly live smoke's WriteSecured leg
from an authenticated round-trip to a bare failure-reply-shape check with no
visible signal.
Verified: dotnet build src/ZB.MOM.WW.MxGateway.NonWindows.slnx succeeds
(IntegrationTests builds cleanly on macOS, net10.0, no COM/x86 dependency).
Flips Batch B (TST-31) to Done in the cycle-3 remediation tracker.
TryStartCommandTask discarded ObserveCommandTaskAsync's task without a
fault-observing continuation -- the one gap in the NEXT-04 discipline
applied everywhere else in this file. ObserveCommandTaskAsync only
swallows OperationCanceledException, so any other exception escaping
ProcessCommandAsync's own catch path would fault the discarded wrapper
and surface only as a finalizer-time unobserved-task exception. Wrap it
with the existing ObserveFaultWhenever helper, same as every other
discarded task in this file.
Six domain reports + overall synthesis. All 47 cycle-2 Done claims verified
at HEAD with zero false Dones and zero regressions; 34 new findings
(0 Critical, 0 High, 4 Medium, 25 Low, 5 Info): GWC-31..38, WRK-32..34,
IPC-33..39, SEC-37..41, CLI-46..50, TST-31..36.
Targeted re-read of the 203-file fca978d sweep (docs(src): add missing
XML docs and strip tracking-ID comments): a mechanical pre-pass narrowed
1,383 deletions to 68 files / 816 residual prose lines, and a judged
review of every one found 17 collateral deletions across 10 files —
rationale prose deleted alongside resolved markers with no equivalent
surviving anywhere in the tree. Restored (markers stay stripped, per the
sweep's intent):
- SessionManager: the three metrics-accounting invariants (kill-path
gauge decrement safety, shutdown kill-fallback registry guard vs
double bookkeeping, SessionClosed-not-SessionRemoved on failed close)
- SessionManagerTests: the matching accounting expectation note and the
reason-string propagation pins (test summary + FakeWorkerClient.LastKillReason)
- MxAccessGatewayService.AcknowledgeAlarm: the routing remarks (GUID vs
Provider!Group.Tag vs InvalidRequest; session-less via IGatewayAlarmService)
— inheritdoc resolves to nothing (proto-generated base is undocumented)
- HubTokenService.Validate: why the hollow-token guard exists
(non-empty AuthenticationType alone satisfies IsAuthenticated)
- DashboardSessionAdminService: why both broad catches exist (keep raw
teardown exceptions out of Blazor's error boundary), Close + Kill paths
- WorkerPipeSession.RunAsync: why the factory result throws instead of
NREing (unambiguous failure; finally-block Dispose can't no-op)
- LmxSubtagAlarmSource: Advise idempotency; Write is always unsecured
(user id 0), never WriteSecured semantics
- WnWrapAlarmConsumer: the v1-prefix path is what WIN-911-style code uses
- DashboardSnapshotPublisherTests: what the 10ms slack absorbs
(Task.Delay's coarse Windows timer quantum)
- DashboardBrowseAndAlarmModelTests: why the label text is pinned, not
just the CSS class
Everything else flagged verified benign: inheritdoc replacements resolve
to equal-or-richer interface docs, or the substance survives relocated.
NonWindows slnx 0W/0E; touched gateway test classes 65/65.
The consequence that full-DN keys can never match (the shared LDAP
provider pre-strips groups to short RDN names) was documented only in
MapGroupsToTags's lookup comment; the class-level <summary> now states
it and points there, mirroring DashboardGroupRoleMapping.
refreshStaActivityOnCapture was declared between DispatchAsync and the property that
wraps it, rather than with the other instance fields. Moved up to the field block per the
member ordering in docs/style-guides/CSharpStyleGuide.md. Declaration move only — no
behavior, no other edits.
Follow-up to the Server-040 comment restoration (d3ac527). The restored
comment in DashboardGroupRoleMapping records that the shared
ZB.MOM.WW.Auth.Ldap provider hands the mapper groups already stripped to
short RDN names, so a full-DN GroupToRole *key* can never match. Three
doc sites still told operators the opposite, and the tag mapper carried
the same consequence with no comment at all.
- docs/GatewayConfiguration.md: GroupToRole and GroupToTag rows both said
keys may be 'short CN or full DN — leading-RDN match'. Corrected to
short group names only, with the reason (pre-stripped groups) and a
note that the mapper's full-string-then-RDN fallback only matters to
non-library callers of the IGroupRoleMapper<string> seam.
- docs/GatewayDashboardDesign.md: the login-flow bullet said the user's
memberOf '(or short CN)' is matched against GroupToRole; it now
describes what actually happens — groups arrive short and are matched
against short-name keys.
- DashboardGroupTagMapping: short comment at the lookup pointing at the
DashboardGroupRoleMapping comment, since it reuses ExtractFirstRdnValue
and inherits the same full-DN-key-unsupported consequence.
Both doc rows are pre-existing on main — they predate this branch and
were not introduced by the Server-040 work; only their incorrectness was
surfaced by it. Comment/doc-only; no logic changes.
The BlockDispatch branch waited 5 real seconds and then proceeded regardless — it does not
branch on the wait's result. The long-in-flight test's inspection loop is bounded by
elapsed time and a frame floor, so on a loaded box (the documented 4-5x slowdown class) it
can plausibly outrun that 5 s. When it does, the reply is emitted mid-window,
AssertNotWorkerFault waves it past, and the reply leg then waits for a reply already gone
by — failing at the 20 s cancellation with no message, on exactly the loaded-box run the
widened windows exist to survive.
The wait is a pure safety net: nothing asserts on it firing, and every test that blocks
dispatch releases it explicitly (ReleaseDispatch, or a WorkerShutdown envelope, both of
which Set the event) — none reaches the timeout on a healthy run. Named it
BlockedDispatchSafetyNet and raised it to 30 s, above any window a test opens and above the
20 s cancellation those tests arm, so a wedged test always fails on its own token with its
own message. Dispose still releases the wait, so teardown never waits on it either.
Inline rationale in the test now states the decoupling and what a close pairing would cost,
rather than asserting the window stays inside a 5 s ceiling. Nothing else changed.
Three review findings on 7da52b6:
1. The AssertNotFault doc block landed between the predicate-overload ReadUntilAsync's
doc block and the helper, so the compiler attached the merged block to the helper and
ReadUntilAsync lost its docs entirely. Helper and its docs moved above ReadUntilAsync,
whose docs are back where they belong.
2. The compressed watchdog windows (50 ms grace, 100 ms ceiling) reintroduced the
load-sensitivity the fix removed, one layer down.
ReportWatchdogFaultIfNeededAsync measures staleness AFTER the heartbeat frame is
written and flushed over the real named pipe, so a beat whose pipe I/O outlasts the
ceiling faults a healthy session no matter how fresh the captured activity was. At
100 ms that is a plausible stall on a loaded box, and this is the one test asserting
the watchdog NEVER fires. Widened to a 200 ms grace and a 1 s ceiling — still two
orders of magnitude under the 75 s production default.
The inspection loop is now bounded by a 2 s window (twice the ceiling, so a fake whose
activity stopped advancing still accumulates past it and faults) with a 30-frame floor,
rather than a fixed 30 frames that no longer outran the wider ceiling. The floor keeps
a window that saw almost no beats from passing as a clean one. Two seconds stays well
inside FakeRuntimeSession's 5 s dispatch-block ceiling, so the command is still in
flight for the whole window.
3. AssertNotFault renamed AssertNotWorkerFault, matching the WorkerFault body case it
tests.
Scenario intent unchanged: long in-flight command, pump refreshing, zero fault frames,
reply delivered. Test-only.
The In-process page feeds table still described the alarms page's subscription as
provider status only, contradicting the three passages updated in 7b6dfba.
The loop's catch-all comment (and the cadence bullet that repeated it) claimed the
monitor completes a subscriber's stream on restart. It does not: ClearCache pushes
snapshot_status(false) through the still-open channel, and a subscriber is only
completed-with-error on a failed TryWrite, or removed by its own disposal.
The SnapshotStatus arm's priming claim had no test behind it — every push test
attached to an untruncated feed and pushed the edge itself. ScriptedAlarmFeed now
replays an optional open sequence, and a new test attaches to a feed already
primed provider_status then snapshot_status(truncated) and asserts the banner
comes up with no edge pushed after render.
Audited every Server-0xx finding whose Resolution described a
documentation-only or comment-only change, and spot-checked the doc
sub-claims of otherwise test-backed resolutions. 20 entries annotated
in place (append-only; no historical resolution text rewritten).
Two corrections had not survived and are re-applied:
Server-040: the MapGroupsToRoles lookup-precedence comment moved intact
into DashboardGroupRoleMapping (792e3f9) and was then deleted wholesale
by fca978d, a sweep meant only to strip (Server-NNN) tracking markers.
That also removed a later, substantive paragraph recording that the
shared ZB.MOM.WW.Auth.Ldap provider pre-strips groups to short RDN
names, so a full-DN GroupToRole key is unsupported. Both paragraphs
restored, minus the tracking IDs.
Server-009: the WAL / busy_timeout note vanished when the Storage
section of docs/Authentication.md was rewritten to delegate
connection-factory detail to ZB.MOM.WW.Auth.ApiKeys. The behavior is
still live in the library (confirmed against 0.2.1), so the fix is
prose-only.
Server-011/014/022/023 are annotated as moot rather than regressed:
the IAlarmRpcDispatcher trio was deleted in dc9c0c9 and no stale
'not yet wired' / 'PR A.6/A.7' prose survives in Server source.
Server-038's documented v1 ACL gap was later closed by
IDashboardSessionAcl, so its remarks are current.
Comment/doc-only; no logic changes.
RunAsync_LongInFlightCommandThatKeepsPumping_DoesNotFaultAndDeliversReply failed
deterministically on the Windows box with a StaHung fault whose command_method was
empty and whose staleness was 233 ms — i.e. a fault raised with no command in flight,
before the scenario under test began. FakeRuntimeSession stamps LastStaActivityUtc once,
at construction, and the test only started refreshing it after the blocked dispatch
signalled. Everything between those two points — handshake, STA init, the first
heartbeat — captured a snapshot already stale past the compressed 50 ms grace, with no
correlation id for the watchdog to suppress on, so the watchdog correctly reported the
fake as hung.
The harness, not the product, was wrong: StaRuntime.ThreadMain calls MarkActivity() on
every WaitForWorkOrMessages iteration, so a live worker is never captured stale, idle or
busy. Model that where it belongs — FakeRuntimeSession.RefreshStaActivityOnCapture (opt
in, default off) stamps activity at each CaptureHeartbeat and leaves the rest of the
snapshot alone — and arm it before RunAsync so the first beat is covered. The test-owned
refresh loop goes away with it; a thread-pool loop racing a compressed grace could not
have held the invariant anyway.
Scenario intent is unchanged and slightly stronger: the command still blocks in dispatch
across 30 heartbeats (~600 ms, many multiples of the 100 ms stuck ceiling), no frame may
be a fault, and the reply must still arrive. The reply leg is now fault-checked too
(previously it skipped frames blindly), and the pump keeps running across the release, as
it does in production while the reply is marshalled off the STA. Fault assertions now
report the category and diagnostic message instead of a bare body-case mismatch.
Test-only change; no product code, frame protocol, or STA rule touched.
The truncated-snapshot caveat moved from poll-only to push-driven. The page
already held an in-process alarm-feed subscription for the provider badge; it
now also handles the feed's snapshot_status frame, so a capped provider fetch is
caveated when the monitor decides it rather than up to three seconds later.
The poll's assignment stays as the reconcile baseline — both sources read the
same monitor verdict, and the frame is consumed, never synthesized page-side.
StreamAsync primes every subscriber with a snapshot_status frame at open, so a
page attaching mid-truncation needs no priming logic of its own; the loop is
renamed StatusFeedLoopAsync because it now feeds two indicators, not one.
Both lists predate the scope rename and would mislead anyone creating a key:
CLAUDE.md's Authentication section still named the pre-rename scopes, and
docs/Authentication.md's ops.alice example passed 'read,write', which
GatewayScopes.ValidateScopes rejects outright. Same defect family as the
Build/Test/Run sample fixed in a5f843c.
Recorded as a follow-up: code review finding Server-012 claims it fixed the two
CLAUDE.md lists on 2026-05-18, but neither correction was present — a Resolved
finding is not re-examined, so the sibling Server-0xx doc resolutions want a
spot-check for the same pattern.
The prior plan's "Follow-ups recorded, not started" block described pre-branch
behavior; every item is now closed, narrowed, or restated with its evidence, so
the block no longer misleads a reader who lands on it first. The stale Rust-guard
bullet is corrected in place rather than deleted: Check 3 always existed, and
saying so is the only way the reader learns what the real (one-directional) gap was.
Also fixes the CLAUDE.md apikey sample, which named a verb the parser has never
accepted ('create'; only 'create-key' exists, no alias), omitted the required
--key-id, and listed non-canonical scope strings that GatewayScopes now rejects
at create time — the sample could not have run.
The final integration review's non-blocker reservations, all documentation
or comment truth except one test arm.
The alarm feed opens provider_status -> snapshot_status -> cached
active_alarm -> snapshot_complete, which is what GatewayAlarmMonitor has
done since the snapshot_status frame landed. Two places still described
the old order: docs/Grpc.md said provider_status arrived *after* the
initial snapshot, contradicting its own snapshot_status section two
paragraphs down, and AlarmFeedMessage's leading proto comment named
neither status frame at all. Both now state the sequence the monitor
emits, so a client author reading either one gets the frame order right.
The proto comment change flows through the generated trees (Contracts,
Go, Java) and the client descriptor set; the Rust vendored copy stays
byte-identical to canonical. Python's generator does not carry proto
comments into its output, so it has no delta.
AlarmsHubPublisherTests' valueless-payload case covered snapshot_complete
and provider_status but not snapshot_status, leaving the newest arm
unpinned against the redaction switch that must ignore it. Added.
WnWrapAlarmConsumer's ack comment led with the 2026-05-01 reading that
-55 tracks the 8-arg overload, then refuted itself six lines later with
the 2026-08-18 probe. It now leads with the observation labelled as
narrower than it reads -- mirroring the correction already in
docs/AlarmClientDiscovery.md -- so the block argues one thing: the 6-arg
call site stays for parity, and rc semantics are per the probe. A
paragraph orphaned by an earlier splice is rewrapped. Comment interior
only; the file compiles on Windows.
TST-16 gets a dated closure note rather than a rewrite: the flag it
called dead was implemented 2026-08-18. GatewayDashboardDesign's /browse
paragraph gains the failed-read carve-out GatewayConfiguration already
documented, so the two agree that a failed read keeps its - placeholder.
Joseph Doherty