feat(GWC-37,WRK-32): refresh live alarm watch lists

archreview/2026-08-19/remediation/00-tracking.md

@@ -110,7 +110,7 @@ The continuation runs serially in the isolated `.worktrees/c3-p2-followups` work
 | I — gateway correctness/security | GWC-33/35, SEC-38/39 | `gpt-5.6-sol` high | Done | Focused regression tests green; NonWindows build clean |
 | J — secondary contracts | IPC-36/37 | `gpt-5.6-sol` high | Done | Shared launch constants and descriptor parity tests green |
 | K — client alarm parity | CLI-47/48/49/50 | `gpt-5.6-terra` high | Done | All five client suites green |
-| L — live watch-list/proto wave | watch-list refresh follow-up + WRK-32 proto comment | `gpt-5.6-sol` high | Not started | Codegen clean; portable alarm/contract tests green; windev Worker.Tests green |
+| L — live watch-list/proto wave | watch-list refresh follow-up + WRK-32 proto comment | `gpt-5.6-sol` high | In progress | Codegen clean; portable alarm/contract tests green; windev Worker.Tests green |
 | M — Windows gateway CI | TST-35 | `gpt-5.6-terra` medium | Not started | windev `live` mode proves Worker, gateway, full-slnx, and live smoke tiers |
 | N — integration and release | publish five clients + Contracts | `gpt-5.6-sol` high | Not started | Full local/windev gates; merged `main`; registry coordinates and Go tag verified |
 

clients/rust/protos/mxaccess_gateway.proto

@@ -130,6 +130,7 @@ message MxCommand {
     WriteSecuredBulkCommand write_secured_bulk = 41;
     WriteSecured2BulkCommand write_secured2_bulk = 42;
     ReadBulkCommand read_bulk = 43;
+    UpdateAlarmWatchListCommand update_alarm_watch_list = 44;
     PingCommand ping = 100;
     GetSessionStateCommand get_session_state = 101;
     GetWorkerInfoCommand get_worker_info = 102;
@@ -174,6 +175,7 @@ enum MxCommandKind {
   MX_COMMAND_KIND_WRITE_SECURED_BULK = 32;
   MX_COMMAND_KIND_WRITE_SECURED2_BULK = 33;
   MX_COMMAND_KIND_READ_BULK = 34;
+  MX_COMMAND_KIND_UPDATE_ALARM_WATCH_LIST = 35;
   MX_COMMAND_KIND_PING = 100;
   MX_COMMAND_KIND_GET_SESSION_STATE = 101;
   MX_COMMAND_KIND_GET_WORKER_INFO = 102;
@@ -344,8 +346,8 @@ enum AlarmProviderMode {
 // Subscription expression follows the canonical
 // `\\<machine>\Galaxy!<area>` format (literal "Galaxy" provider). The
 // worker spins up a wnwrapConsumer-backed subscription on its STA on
-// first call; subsequent calls are an error (use UnsubscribeAlarms then
-// SubscribeAlarms to reconfigure).
+// first call; subsequent calls are an error. Use UpdateAlarmWatchList to
+// replace the standby targets without restarting the primary subscription.
 message SubscribeAlarmsCommand {
   string subscription_expression = 1;
   // UNSPECIFIED = auto-failover/failback. ALARMMGR/SUBTAG force one provider.
@@ -354,6 +356,17 @@ message SubscribeAlarmsCommand {
   // alarmmgr mode; in subtag mode it bounds what the consumer can observe.
   repeated AlarmSubtagTarget watch_list = 3;
   AlarmFailoverConfig failover = 4;
+  // True when auto mode should retain subtag-fallback capability even if the
+  // gateway's initial discovery produced an empty watch list. False leaves an
+  // empty list as an intentional alarm-manager-only subscription.
+  bool fallback_enabled = 5;
+}
+
+// Replace the live alarm subscription's subtag standby targets. The worker
+// constructs and attaches the replacement before swapping it into service, so
+// a setup failure leaves the existing standby and active provider unchanged.
+message UpdateAlarmWatchListCommand {
+  repeated AlarmSubtagTarget watch_list = 1;
 }
 
 // Tear down the worker's alarm consumer. No-op if no subscription is
@@ -537,11 +550,14 @@ message MxCommandReply {
   MxValue return_value = 6;
   // Correlated per-item outcome rows. For WRITE / WRITE2 / WRITE_SECURED /
   // WRITE_SECURED2 replies the worker holds the reply for a bounded window
-  // (default 1.5 s, MXGATEWAY_WORKER_WRITE_COMPLETION_WAIT_MS) waiting for
+  // (default 1.5 s, MxGateway:Worker:WriteCompletionWaitMilliseconds) waiting for
   // the matching MXAccess OnWriteComplete callback and copies its status rows
   // here, so statuses[0] carries the real MXAccess commit outcome (success OR
   // failure) while protocol_status/hresult still describe command acceptance
-  // only. Empty statuses on a write reply means the completion did not arrive
+  // only. Callback correlation is recency-based per item handle: after the
+  // bounded wait, a sequential write's callback supersedes a timed-out
+  // predecessor, and a later stale callback for that predecessor is ignored.
+  // Empty statuses on a write reply means the completion did not arrive
   // within the window — the write is unconfirmed, not failed. Correlation is
   // best-effort per (server_handle, item_handle): MXAccess's callback carries
   // no transaction id, so concurrent writes to the same item within the

docs/AlarmClientDiscovery.md

@@ -849,15 +849,20 @@ MXAccess item addresses for the `InAlarm`, `Acked`, `AckMsg`, and `Priority`
 subtags (confirmed AVEVA `AlarmExtension` field names, verified against the live
 ZB Galaxy `attribute_definition` rows).
 
-**The list is fixed for the life of the subscription.** The worker builds its
-subtag consumer from the targets `SubscribeAlarms` carried and keeps them until
-the subscription ends; a second `SubscribeAlarms` on a subscribed session is
-rejected, and the only way to replace the list — `UnsubscribeAlarms` then
-`SubscribeAlarms` — rebuilds `FailoverAlarmConsumer`, restarting it on the
-primary and discarding the warm standby state. Re-sending on a failover would
-therefore flap the feed rather than repair it. A monitor restart (a worker fault,
-or a gateway restart) re-resolves and re-sends, and that is the supported way to
-pick up Galaxy objects added since the monitor started.
+The gateway refreshes this list on the existing alarm reconciliation cadence
+and immediately before publishing a failover-to-subtag status. It compares a
+canonical fingerprint of all six target fields and sends
+`UpdateAlarmWatchListCommand` only for a material change. The worker constructs,
+subscribes, and attaches the replacement standby on its STA before swapping it
+in; a setup failure leaves the previous standby and the current primary/subtag
+mode unchanged. The gateway advances its acknowledged fingerprint only after an
+OK reply, so a rejected update remains degraded and is retried.
+
+`SubscribeAlarmsCommand.fallback_enabled` distinguishes an initially empty but
+discovery-enabled fallback from an intentionally alarm-manager-only
+subscription. In the former case the worker creates an empty standby that can be
+hot-swapped after discovery recovers. `ForceAlarmManager` leaves the field false
+and does not create a standby.
 
 Because the list is fixed, the resolution is **graded** rather than merely
 logged (GWC-37). `ResolveAsync` returns an `AlarmWatchListResolution` carrying
@@ -871,10 +876,10 @@ monitor folds the verdict into the alarm feed's `AlarmProviderStatus`:
   `AlarmProviderReasons.SubtagDiscoveryFailed` and the failure message, so a
   Galaxy Repository outage at startup is a standing status rather than one log
   line emitted possibly weeks before the failover that needs the list.
-- On the failover edge (`ApplyProviderModeChangeAsync` with `toMode == Subtag`)
-  the monitor re-resolves and compares against what it sent. A difference is
-  reported as `AlarmProviderReasons.SubtagWatchListStale` with both counts, on
-  the same status frame as the failover, because it cannot be applied.
+- If the worker rejects a material update, the monitor retains the previous
+  acknowledged fingerprint and reports
+  `AlarmProviderReasons.SubtagWatchListStale` with the rejection diagnostic.
+  The next reconciliation or failover edge retries the same resolved targets.
 
 `degraded` on the status is therefore the OR of "the subtag provider is the one
 serving" and "the subtag watch-list cannot cover anything". In `Auto` the second

docs/Contracts.md

@@ -40,6 +40,15 @@ the corresponding MXAccess `AddItem`, `Advise`, `UnAdvise`, and `RemoveItem`
 calls sequentially on the session STA and preserves input order in the result
 list.
 
+The shared alarm command model includes `SubscribeAlarms` and
+`UpdateAlarmWatchList`. `SubscribeAlarmsCommand.fallback_enabled` makes an empty
+initial watch list explicitly fallback-capable, allowing discovery recovery to
+populate a standby without restarting the primary alarm-manager subscription.
+`UpdateAlarmWatchListCommand.watch_list` is the complete replacement list. The
+worker prepares the replacement on its STA before swapping it into the existing
+failover consumer and returns a normal `MxCommandReply`; callers must treat only
+`protocol_status = OK` as acknowledgement of the new list.
+
 The command model also includes bulk write/read command kinds:
 `WriteBulk`, `Write2Bulk`, `WriteSecuredBulk`, `WriteSecured2Bulk`, and
 `ReadBulk`. They are unary `Invoke` payloads on the same `MxAccessGateway`

docs/GatewayConfiguration.md

@@ -439,7 +439,7 @@ behavior.
 | `MxGateway:Alarms:Enabled` | `false` | Gates the gateway's always-on central alarm monitor. When `true`, the gateway opens one gateway-owned worker session dedicated to alarms, caches the active-alarm set, and fans it out to every client through the `StreamAlarms` RPC — no client opens its own session to see alarms. |
 | `MxGateway:Alarms:SubscriptionExpression` | _(empty)_ | AVEVA alarm-subscription expression the monitor subscribes on startup, in canonical `\\<machine>\Galaxy!<area>` form. The literal `Galaxy` provider is correct regardless of the Galaxy database name. When empty and `Enabled` is `true`, the gateway falls back to `\\<MachineName>\Galaxy!<DefaultArea>` if `DefaultArea` is set. |
 | `MxGateway:Alarms:DefaultArea` | _(empty)_ | Area name used to compose a default subscription when `SubscriptionExpression` is empty. If both are empty while `Enabled` is `true`, the monitor faults with a configuration diagnostic. |
-| `MxGateway:Alarms:ReconcileIntervalSeconds` | `30` | How often the monitor reconciles its in-process alarm cache against the worker's authoritative active-alarm snapshot, catching transitions the live poll-and-diff feed missed. Floored at 5 seconds. |
+| `MxGateway:Alarms:ReconcileIntervalSeconds` | `30` | How often the monitor re-resolves and, on material change, hot-swaps the subtag fallback watch-list, then reconciles its in-process alarm cache against the worker's authoritative active-alarm snapshot. The acknowledged watch-list fingerprint advances only after an OK worker reply. Floored at 5 seconds. |
 | `MxGateway:Alarms:PollIntervalMilliseconds` | `500` | Cadence at which the worker's STA polls the AVEVA alarm consumer (`GetXmlCurrentAlarms2`) for the active-alarm snapshot the live feed diffs. Must be between `100` and `3600000` (one hour): every poll is a COM call plus an XML parse on the same STA that serves reads and writes, so a tighter cadence starves the command path, while a value above an hour stops being a cadence and silently disables alarm polling. The gateway conveys the value to the worker via the `MXGATEWAY_ALARM_POLL_INTERVAL_MS` environment variable; a missing or out-of-range value leaves the worker on the 500 ms default rather than failing the session. |
 | `MxGateway:Alarms:MaxAlarmsPerFetch` | `1024` | Cap the worker passes to `GetXmlCurrentAlarms2`'s `maxAlmCnt`. Must be between `64` and `65536` — the worker is a 32-bit process that materializes each reply as one BSTR plus a full `XmlDocument`, so an unbounded cap faults the STA with an out-of-memory rather than merely slowing it. It doubles as the **truncation threshold**: a fetch returning exactly this many records is treated as truncated, because the COM API caps its reply with no "more available" flag. On a truncated poll the worker retains the alarms the capped reply could not mention instead of letting their absence read as a clear, and logs a rate-limited `AlarmSnapshotTruncated` warning to its stderr (identifiers and counts only). **Remediation when you see that warning: raise this value** so the steady-state active-alarm count fits inside one fetch. A galaxy permanently above the cap holds stale entries in the snapshot until a sub-cap poll, and loses clear→re-raise cycles that happen entirely out of window (see `docs/DesignDecisions.md`). Conveyed to the worker via the `MXGATEWAY_ALARM_MAX_ALARMS_PER_FETCH` environment variable; a missing or out-of-range value leaves the worker on the 1024 default. |
 

docs/MxAccessWorkerInstanceDesign.md

@@ -351,6 +351,18 @@ native client correlating by handle has the identical ambiguity). The exposure
 is bounded: `statuses` is an enrichment field, and `Hresult`/`ProtocolStatus`
 stay acceptance-only regardless of which completion (if any) was attributed.
 
+## Live alarm watch-list replacement
+
+An auto-mode `SubscribeAlarms` with `fallback_enabled = true` always builds a
+`FailoverAlarmConsumer`, even when initial discovery supplied no targets. The
+handler retains the subscription expression so `UpdateAlarmWatchList` can build
+and subscribe a new subtag consumer entirely on the session STA. The failover
+consumer attaches the replacement's transition callback before swapping the
+standby reference, then detaches and disposes the old standby. If construction,
+subscription, or attachment fails, it disposes the replacement and preserves
+the old standby. The active-provider selector is never reset, so primary mode
+stays primary and subtag mode immediately delegates to the new standby.
+
 ## COM Creation
 
 The MXAccess analysis source at `C:\Users\dohertj2\Desktop\mxaccess` identifies

src/ZB.MOM.WW.MxGateway.Contracts/Protos/mxaccess_gateway.proto

@@ -130,6 +130,7 @@ message MxCommand {
     WriteSecuredBulkCommand write_secured_bulk = 41;
     WriteSecured2BulkCommand write_secured2_bulk = 42;
     ReadBulkCommand read_bulk = 43;
+    UpdateAlarmWatchListCommand update_alarm_watch_list = 44;
     PingCommand ping = 100;
     GetSessionStateCommand get_session_state = 101;
     GetWorkerInfoCommand get_worker_info = 102;
@@ -174,6 +175,7 @@ enum MxCommandKind {
   MX_COMMAND_KIND_WRITE_SECURED_BULK = 32;
   MX_COMMAND_KIND_WRITE_SECURED2_BULK = 33;
   MX_COMMAND_KIND_READ_BULK = 34;
+  MX_COMMAND_KIND_UPDATE_ALARM_WATCH_LIST = 35;
   MX_COMMAND_KIND_PING = 100;
   MX_COMMAND_KIND_GET_SESSION_STATE = 101;
   MX_COMMAND_KIND_GET_WORKER_INFO = 102;
@@ -344,8 +346,8 @@ enum AlarmProviderMode {
 // Subscription expression follows the canonical
 // `\\<machine>\Galaxy!<area>` format (literal "Galaxy" provider). The
 // worker spins up a wnwrapConsumer-backed subscription on its STA on
-// first call; subsequent calls are an error (use UnsubscribeAlarms then
-// SubscribeAlarms to reconfigure).
+// first call; subsequent calls are an error. Use UpdateAlarmWatchList to
+// replace the standby targets without restarting the primary subscription.
 message SubscribeAlarmsCommand {
   string subscription_expression = 1;
   // UNSPECIFIED = auto-failover/failback. ALARMMGR/SUBTAG force one provider.
@@ -354,6 +356,17 @@ message SubscribeAlarmsCommand {
   // alarmmgr mode; in subtag mode it bounds what the consumer can observe.
   repeated AlarmSubtagTarget watch_list = 3;
   AlarmFailoverConfig failover = 4;
+  // True when auto mode should retain subtag-fallback capability even if the
+  // gateway's initial discovery produced an empty watch list. False leaves an
+  // empty list as an intentional alarm-manager-only subscription.
+  bool fallback_enabled = 5;
+}
+
+// Replace the live alarm subscription's subtag standby targets. The worker
+// constructs and attaches the replacement before swapping it into service, so
+// a setup failure leaves the existing standby and active provider unchanged.
+message UpdateAlarmWatchListCommand {
+  repeated AlarmSubtagTarget watch_list = 1;
 }
 
 // Tear down the worker's alarm consumer. No-op if no subscription is
@@ -537,11 +550,14 @@ message MxCommandReply {
   MxValue return_value = 6;
   // Correlated per-item outcome rows. For WRITE / WRITE2 / WRITE_SECURED /
   // WRITE_SECURED2 replies the worker holds the reply for a bounded window
-  // (default 1.5 s, MXGATEWAY_WORKER_WRITE_COMPLETION_WAIT_MS) waiting for
+  // (default 1.5 s, MxGateway:Worker:WriteCompletionWaitMilliseconds) waiting for
   // the matching MXAccess OnWriteComplete callback and copies its status rows
   // here, so statuses[0] carries the real MXAccess commit outcome (success OR
   // failure) while protocol_status/hresult still describe command acceptance
-  // only. Empty statuses on a write reply means the completion did not arrive
+  // only. Callback correlation is recency-based per item handle: after the
+  // bounded wait, a sequential write's callback supersedes a timed-out
+  // predecessor, and a later stale callback for that predecessor is ignored.
+  // Empty statuses on a write reply means the completion did not arrive
   // within the window — the write is unconfirmed, not failed. Correlation is
   // best-effort per (server_handle, item_handle): MXAccess's callback carries
   // no transaction id, so concurrent writes to the same item within the

src/ZB.MOM.WW.MxGateway.Server/Alarms/GatewayAlarmMonitor.cs

@@ -66,9 +66,10 @@ public sealed class GatewayAlarmMonitor : BackgroundService, IGatewayAlarmServic
     private bool _subtagCoverageMissing;
     private string _subtagCoverageReason = string.Empty;
 
-    // The watch-list references actually sent to the worker in SubscribeAlarms, guarded by _sync.
-    // The worker holds that list for the life of the subscription, so a later re-resolution is
-    // compared against this to report drift rather than silently diverging.
+    // The full canonical watch-list fingerprint acknowledged by the worker and its alarm
+    // references, guarded by _sync. The fingerprint advances only after an OK subscribe/update
+    // reply, so a rejected replacement remains material and is retried on the next refresh edge.
+    private string _acknowledgedWatchListFingerprint = string.Empty;
     private IReadOnlyCollection<string> _sentWatchListReferences = [];
 
     // Whether the worker's most recent reconcile fetch was capped, guarded by _sync.
@@ -356,9 +357,6 @@ public sealed class GatewayAlarmMonitor : BackgroundService, IGatewayAlarmServic
         // feed subscribers outlive the monitor's worker session and may already be attached.
         lock (_sync)
         {
-            _sentWatchListReferences = watchList
-                .Select(target => target.AlarmFullReference)
-                .ToHashSet(StringComparer.OrdinalIgnoreCase);
             SetSubtagCoverage(GradeSubtagCoverage(forcedMode, resolution, staleAgainstSent: false), broadcast: true);
         }
 
@@ -374,6 +372,7 @@ public sealed class GatewayAlarmMonitor : BackgroundService, IGatewayAlarmServic
         {
             SubscriptionExpression = subscription,
             ForcedMode = forcedMode,
+            FallbackEnabled = CanUseSubtagFallback(forcedMode),
             Failover = new AlarmFailoverConfig
             {
                 ConsecutiveFailureThreshold = _options.Fallback.ConsecutiveFailureThreshold,
@@ -404,6 +403,11 @@ public sealed class GatewayAlarmMonitor : BackgroundService, IGatewayAlarmServic
                 ?? $"status {code}";
             throw new InvalidOperationException($"Worker rejected SubscribeAlarms: {diagnostic}");
         }
+
+        lock (_sync)
+        {
+            AcknowledgeWatchList(watchList);
+        }
     }
 
     private async Task ReconcileLoopAsync(string sessionId, CancellationToken cancellationToken)
@@ -416,6 +420,8 @@ public sealed class GatewayAlarmMonitor : BackgroundService, IGatewayAlarmServic
             {
                 try
                 {
+                    await RefreshAlarmWatchListAsync(sessionId, broadcast: true, cancellationToken)
+                        .ConfigureAwait(false);
                     await ReconcileAsync(sessionId, cancellationToken).ConfigureAwait(false);
                 }
                 catch (OperationCanceledException)
@@ -545,18 +551,14 @@ public sealed class GatewayAlarmMonitor : BackgroundService, IGatewayAlarmServic
         AlarmProviderMode toMode = change.Mode;
         string reason = change.Reason ?? string.Empty;
 
-        // GWC-37: this is the moment the subtag watch-list stops being theoretical — the provider
-        // that is about to serve is the one built from it. Re-resolve BEFORE the status is
-        // published so the frame the operator sees on the failover carries the coverage verdict
-        // rather than a second frame later, and so a watch-list that has drifted since
-        // SubscribeAlarms is reported instead of silently diverging. The re-resolution is NOT
-        // re-sent: the worker rejects a second SubscribeAlarms while subscribed, and the only way
-        // to replace the list — Unsubscribe then Subscribe — rebuilds the FailoverAlarmConsumer,
-        // which restarts on the primary that just failed and discards the warm standby state, so
-        // it would flap the feed rather than repair it. A monitor restart re-resolves and re-sends.
+        // The failover edge is the moment the subtag watch-list stops being theoretical. Refresh
+        // it before publishing the status frame so recovered discovery is applied to the already
+        // active standby and the operator sees the acknowledged coverage verdict atomically with
+        // the provider switch.
         if (toMode == AlarmProviderMode.Subtag)
         {
-            await RefreshSubtagCoverageAsync(cancellationToken).ConfigureAwait(false);
+            await RefreshAlarmWatchListAsync(sessionId, broadcast: false, cancellationToken)
+                .ConfigureAwait(false);
         }
 
         AlarmProviderStatus status;
@@ -606,14 +608,17 @@ public sealed class GatewayAlarmMonitor : BackgroundService, IGatewayAlarmServic
         }
     }
 
-    // GWC-37: re-resolves the subtag watch-list and re-grades the coverage verdict without
-    // touching the worker's subscription. Best-effort: a resolver that throws (only cancellation
-    // and programming errors do — discovery failure is reported in the resolution) leaves the
-    // verdict from the last subscribe in place, because a stale verdict is better than none.
-    // Does not broadcast: the callers publish a status frame of their own immediately after.
-    private async Task RefreshSubtagCoverageAsync(CancellationToken cancellationToken)
+    private async Task RefreshAlarmWatchListAsync(
+        string sessionId,
+        bool broadcast,
+        CancellationToken cancellationToken)
     {
         AlarmProviderMode forcedMode = MapForcedMode(_options.Fallback.Mode);
+        if (!CanUseSubtagFallback(forcedMode))
+        {
+            return;
+        }
+
         AlarmWatchListResolution resolution;
         try
         {
@@ -627,18 +632,96 @@ public sealed class GatewayAlarmMonitor : BackgroundService, IGatewayAlarmServic
         {
             _logger.LogWarning(
                 exception,
-                "Re-resolving the alarm subtag watch-list failed; keeping the coverage verdict from the last subscribe.");
+                "Re-resolving the alarm subtag watch-list failed; keeping the last acknowledged watch list.");
             return;
         }
 
+        string resolvedFingerprint = CanonicalWatchListFingerprint(resolution.Targets);
+        string acknowledgedFingerprint;
         lock (_sync)
         {
-            bool stale = !resolution.Targets
-                .Select(target => target.AlarmFullReference)
-                .ToHashSet(StringComparer.OrdinalIgnoreCase)
-                .SetEquals(_sentWatchListReferences);
-            SetSubtagCoverage(GradeSubtagCoverage(forcedMode, resolution, stale), broadcast: false);
+            acknowledgedFingerprint = _acknowledgedWatchListFingerprint;
         }
+
+        if (string.Equals(resolvedFingerprint, acknowledgedFingerprint, StringComparison.Ordinal))
+        {
+            lock (_sync)
+            {
+                SetSubtagCoverage(
+                    GradeSubtagCoverage(forcedMode, resolution, staleAgainstSent: false),
+                    broadcast);
+            }
+            return;
+        }
+
+        UpdateAlarmWatchListCommand update = new();
+        update.WatchList.AddRange(resolution.Targets);
+        WorkerCommandReply reply = await _sessionManager.InvokeAsync(
+                sessionId,
+                new WorkerCommand
+                {
+                    Command = new MxCommand
+                    {
+                        Kind = MxCommandKind.UpdateAlarmWatchList,
+                        UpdateAlarmWatchList = update,
+                    },
+                },
+                cancellationToken)
+            .ConfigureAwait(false);
+
+        ProtocolStatusCode? code = reply.Reply?.ProtocolStatus?.Code;
+        lock (_sync)
+        {
+            if (code == ProtocolStatusCode.Ok)
+            {
+                AcknowledgeWatchList(resolution.Targets);
+                SetSubtagCoverage(
+                    GradeSubtagCoverage(forcedMode, resolution, staleAgainstSent: false),
+                    broadcast);
+                return;
+            }
+
+            string diagnostic = reply.Reply?.DiagnosticMessage
+                ?? reply.Reply?.ProtocolStatus?.Message
+                ?? $"status {code}";
+            string reason = GradeSubtagCoverage(forcedMode, resolution, staleAgainstSent: true);
+            SetSubtagCoverage($"{reason}; worker rejected watch-list update ({diagnostic})", broadcast);
+        }
+    }
+
+    private bool CanUseSubtagFallback(AlarmProviderMode forcedMode) =>
+        forcedMode != AlarmProviderMode.Alarmmgr
+        && (forcedMode == AlarmProviderMode.Subtag
+            || _options.Fallback.Discovery.UseGalaxyRepository
+            || _options.Fallback.Discovery.IncludeAttributes.Length > 0);
+
+    // Caller holds _sync.
+    private void AcknowledgeWatchList(IReadOnlyList<AlarmSubtagTarget> watchList)
+    {
+        _acknowledgedWatchListFingerprint = CanonicalWatchListFingerprint(watchList);
+        _sentWatchListReferences = watchList
+            .Select(target => target.AlarmFullReference)
+            .ToHashSet(StringComparer.OrdinalIgnoreCase);
+    }
+
+    private static string CanonicalWatchListFingerprint(IEnumerable<AlarmSubtagTarget> watchList) =>
+        string.Join(
+            "\n",
+            watchList
+                .Select(target => string.Join(
+                    "|",
+                    FingerprintPart(target.AlarmFullReference),
+                    FingerprintPart(target.SourceObjectReference),
+                    FingerprintPart(target.ActiveSubtag),
+                    FingerprintPart(target.AckedSubtag),
+                    FingerprintPart(target.AckCommentSubtag),
+                    FingerprintPart(target.PrioritySubtag)))
+                .Order(StringComparer.Ordinal));
+
+    private static string FingerprintPart(string? value)
+    {
+        string normalized = value ?? string.Empty;
+        return $"{normalized.Length}:{normalized}";
     }
 
     // Grades one resolution against the effective mode. Returns the reason the subtag coverage is
@@ -684,8 +767,7 @@ public sealed class GatewayAlarmMonitor : BackgroundService, IGatewayAlarmServic
         {
             reasons.Add(
                 $"{AlarmProviderReasons.SubtagWatchListStale} ({resolution.Targets.Count} target(s) now "
-                + $"resolve against {_sentWatchListReferences.Count} sent at subscribe); restart the alarm "
-                + "monitor to re-send it");
+                + $"resolve against {_sentWatchListReferences.Count} acknowledged by the worker)");
         }
 
         return string.Join("; ", reasons);

src/ZB.MOM.WW.MxGateway.Tests/Alarms/GatewayAlarmMonitorProviderModeTests.cs

@@ -646,6 +646,7 @@ public sealed class GatewayAlarmMonitorProviderModeTests
 
         // The empty list still went to the worker — the verdict is a report, not a behaviour change.
         Assert.Empty(sessions.LastSubscribeCommand!.WatchList);
+        Assert.True(sessions.LastSubscribeCommand.FallbackEnabled);
 
         AlarmProviderStatus status = await ReadFirstProviderStatusAsync(monitor);
 
@@ -661,16 +662,14 @@ public sealed class GatewayAlarmMonitorProviderModeTests
 
     /// <summary>
     ///     GWC-37: the failover edge is the moment the watch-list stops being theoretical, so the
-    ///     monitor re-resolves it there and publishes the fresh verdict on the same status frame
-    ///     the failover produces. Discovery that has recovered since <c>SubscribeAlarms</c> is
-    ///     reported as drift rather than applied — the worker rejects a second <c>SubscribeAlarms</c>
-    ///     while subscribed, and the only way to replace the list rebuilds the failover consumer on
-    ///     the primary that just failed. The status names both the fresh count and the sent count so
-    ///     an operator knows a monitor restart will pick the new list up.
+    ///     monitor re-resolves it there, hot-swaps the recovered list through
+    ///     <c>UpdateAlarmWatchList</c>, and publishes the acknowledged verdict on the same status
+    ///     frame the failover produces. The update must precede the status frame so the frame never
+    ///     claims recovered coverage before the worker has accepted it.
     /// </summary>
     /// <returns>A task that represents the asynchronous operation.</returns>
     [Fact]
-    public async Task SubtagCoverage_WhenDiscoveryRecoversByFailover_ReResolvesAndReportsDrift()
+    public async Task SubtagCoverage_WhenDiscoveryRecoversByFailover_UpdatesWorkerBeforePublishingStatus()
     {
         using GatewayMetrics metrics = new();
         FakeSessionManager sessions = new();
@@ -734,13 +733,11 @@ public sealed class GatewayAlarmMonitorProviderModeTests
         // The re-resolve happened on the failover edge, before the status was published.
         Assert.Equal(2, resolver.Calls);
 
+        Assert.Single(sessions.UpdateCommands);
+        Assert.Equal(2, sessions.UpdateCommands[0].WatchList.Count);
         string reason = degraded.ProviderStatus.Reason;
         Assert.Contains("alarmmgr failed", reason, StringComparison.Ordinal);
-        Assert.Contains(AlarmProviderReasons.SubtagWatchListStale, reason, StringComparison.Ordinal);
-        Assert.Contains("2 target(s) now resolve against 0 sent", reason, StringComparison.Ordinal);
-
-        // The stale-list warning replaced the empty/failed pair: discovery works again, so the only
-        // remaining problem is that the worker is still using the list it was handed.
+        Assert.DoesNotContain(AlarmProviderReasons.SubtagWatchListStale, reason, StringComparison.Ordinal);
         Assert.DoesNotContain(AlarmProviderReasons.SubtagWatchListEmpty, reason, StringComparison.Ordinal);
         Assert.DoesNotContain(AlarmProviderReasons.SubtagDiscoveryFailed, reason, StringComparison.Ordinal);
 
@@ -750,6 +747,69 @@ public sealed class GatewayAlarmMonitorProviderModeTests
         await monitor.StopAsync(CancellationToken.None);
     }
 
+    /// <summary>Periodic reconciliation applies a recovered watch list once and suppresses an unchanged resolution on the next cadence.</summary>
+    [Fact]
+    public async Task WatchListRefresh_PeriodicRecovery_SendsExactlyOneMaterialUpdate()
+    {
+        using GatewayMetrics metrics = new();
+        FakeSessionManager sessions = new();
+        AlarmWatchListResolution recovered = new(
+            [Target("Galaxy!Area.Tank01.Level.HiHi")],
+            DiscoveryAttempted: true,
+            DiscoveryFailed: false,
+            DiscoveryFailureMessage: null);
+        ScriptedWatchListResolver resolver = new(DiscoveryFailedResolution(), recovered, recovered);
+        using GatewayAlarmMonitor monitor = CreateMonitor(sessions, metrics, resolver, reconcileIntervalSeconds: 5);
+
+        using CancellationTokenSource cts = new();
+        await monitor.StartAsync(cts.Token);
+        await sessions.WaitForUpdateCountAsync(1, WaitTimeout);
+        await WaitUntilAsync(() => resolver.Calls >= 3, WaitTimeout);
+
+        Assert.Single(sessions.UpdateCommands);
+        Assert.Single(sessions.UpdateCommands[0].WatchList);
+
+        await cts.CancelAsync();
+        await monitor.StopAsync(CancellationToken.None);
+    }
+
+    /// <summary>A rejected refresh keeps the old fingerprint and degraded verdict so the same material change is retried.</summary>
+    [Fact]
+    public async Task WatchListRefresh_WorkerRejects_RetainsFingerprintAndRetriesSameTargets()
+    {
+        using GatewayMetrics metrics = new();
+        FakeSessionManager sessions = new();
+        sessions.UpdateReplyCodes.Enqueue(ProtocolStatusCode.MxaccessFailure);
+        sessions.UpdateReplyCodes.Enqueue(ProtocolStatusCode.Ok);
+        AlarmWatchListResolution recovered = new(
+            [Target("Galaxy!Area.Tank01.Level.HiHi")],
+            DiscoveryAttempted: true,
+            DiscoveryFailed: false,
+            DiscoveryFailureMessage: null);
+        ScriptedWatchListResolver resolver = new(DiscoveryFailedResolution(), recovered, recovered);
+        using GatewayAlarmMonitor monitor = CreateMonitor(sessions, metrics, resolver);
+
+        using CancellationTokenSource cts = new();
+        await monitor.StartAsync(cts.Token);
+        await sessions.WaitForSubscribeAsync(WaitTimeout);
+
+        sessions.EmitModeChange(AlarmProviderMode.Subtag, "alarmmgr failed");
+        await sessions.WaitForUpdateCountAsync(1, WaitTimeout);
+        AlarmProviderStatus rejected = await ReadFirstProviderStatusAsync(monitor);
+        Assert.True(rejected.Degraded);
+        Assert.Contains(AlarmProviderReasons.SubtagWatchListStale, rejected.Reason, StringComparison.Ordinal);
+
+        sessions.EmitModeChange(AlarmProviderMode.Subtag, "alarmmgr still failed");
+        await sessions.WaitForUpdateCountAsync(2, WaitTimeout);
+
+        Assert.Equal(
+            sessions.UpdateCommands[0].WatchList[0].AlarmFullReference,
+            sessions.UpdateCommands[1].WatchList[0].AlarmFullReference);
+
+        await cts.CancelAsync();
+        await monitor.StopAsync(CancellationToken.None);
+    }
+
     /// <summary>Reads the provider-status frame every stream opens with, then closes the stream.</summary>
     /// <param name="monitor">The monitor to read from.</param>
     /// <returns>The provider status carried by the first frame.</returns>
@@ -786,12 +846,14 @@ public sealed class GatewayAlarmMonitorProviderModeTests
     private static GatewayAlarmMonitor CreateMonitor(
         FakeSessionManager sessions,
         GatewayMetrics metrics,
-        IAlarmWatchListResolver resolver)
+        IAlarmWatchListResolver resolver,
+        int reconcileIntervalSeconds = 30)
     {
         AlarmsOptions options = new()
         {
             Enabled = true,
             SubscriptionExpression = @"\\NODE\Galaxy!Area",
+            ReconcileIntervalSeconds = reconcileIntervalSeconds,
         };
         return new GatewayAlarmMonitor(
             sessions,
@@ -923,11 +985,34 @@ public sealed class GatewayAlarmMonitorProviderModeTests
         /// <summary>The most recent SubscribeAlarms command the monitor sent.</summary>
         public SubscribeAlarmsCommand? LastSubscribeCommand { get; private set; }
 
+        /// <summary>Gets each live replacement command in invocation order.</summary>
+        public List<UpdateAlarmWatchListCommand> UpdateCommands { get; } = [];
+
+        /// <summary>Scripted protocol statuses for replacement commands.</summary>
+        public Queue<ProtocolStatusCode> UpdateReplyCodes { get; } = new();
+
         /// <summary>Pushes a worker event onto the monitor's event stream.</summary>
         /// <param name="mxEvent">The worker event to push.</param>
         public void EmitEvent(MxEvent mxEvent) =>
             _events.Writer.TryWrite(new WorkerEvent { Event = mxEvent });
 
+        /// <summary>Pushes a provider-mode change onto the worker event stream.</summary>
+        public void EmitModeChange(AlarmProviderMode mode, string reason) => EmitEvent(new MxEvent
+        {
+            OnAlarmProviderModeChanged = new OnAlarmProviderModeChangedEvent
+            {
+                Mode = mode,
+                Reason = reason,
+                At = Timestamp.FromDateTimeOffset(DateTimeOffset.UtcNow),
+            },
+        });
+
+        /// <summary>Waits until at least the requested number of update commands have arrived.</summary>
+        public async Task WaitForUpdateCountAsync(int count, TimeSpan timeout)
+        {
+            await WaitUntilAsync(() => UpdateCommands.Count >= count, timeout);
+        }
+
         /// <summary>Completes once the monitor has issued its SubscribeAlarms command.</summary>
         /// <param name="timeout">The maximum time to wait.</param>
         /// <returns>A task that represents the asynchronous operation.</returns>
@@ -972,9 +1057,20 @@ public sealed class GatewayAlarmMonitorProviderModeTests
                 _subscribed.TrySetResult();
             }
 
+            if (command.Command?.Kind == MxCommandKind.UpdateAlarmWatchList)
+            {
+                UpdateCommands.Add(command.Command.UpdateAlarmWatchList.Clone());
+            }
+
             MxCommandReply reply = new()
             {
-                ProtocolStatus = new ProtocolStatus { Code = ProtocolStatusCode.Ok },
+                ProtocolStatus = new ProtocolStatus
+                {
+                    Code = command.Command?.Kind == MxCommandKind.UpdateAlarmWatchList
+                        && UpdateReplyCodes.TryDequeue(out ProtocolStatusCode updateCode)
+                            ? updateCode
+                            : ProtocolStatusCode.Ok,
+                },
             };
             if (command.Command?.Kind == MxCommandKind.QueryActiveAlarms)
             {

src/ZB.MOM.WW.MxGateway.Tests/Contracts/ProtobufContractRoundTripTests.cs

@@ -1507,6 +1507,52 @@ public sealed class ProtobufContractRoundTripTests
         Assert.Equal(5, parsed.Failover.FailbackStableProbes);
     }
 
+    /// <summary>
+    ///     Verifies the live alarm watch-list replacement command and the
+    ///     subscription's explicit empty-list fallback intent retain their
+    ///     command kind, oneof arm, and payload across protobuf serialization.
+    /// </summary>
+    [Fact]
+    public void AlarmWatchListCommands_RoundTripFallbackIntentAndReplacementPayload()
+    {
+        var subscribe = new SubscribeAlarmsCommand
+        {
+            SubscriptionExpression = @"\\node\Galaxy!Area",
+            FallbackEnabled = true,
+        };
+        var parsedSubscribe = SubscribeAlarmsCommand.Parser.ParseFrom(subscribe.ToByteArray());
+
+        Assert.True(parsedSubscribe.FallbackEnabled);
+        Assert.Empty(parsedSubscribe.WatchList);
+
+        var original = new MxCommand
+        {
+            Kind = MxCommandKind.UpdateAlarmWatchList,
+            UpdateAlarmWatchList = new UpdateAlarmWatchListCommand
+            {
+                WatchList =
+                {
+                    new AlarmSubtagTarget
+                    {
+                        AlarmFullReference = "Galaxy!Area.Tank01.Level.HiHi",
+                        SourceObjectReference = "Tank01",
+                        ActiveSubtag = "Tank01.Level.HiHi.InAlarm",
+                        AckedSubtag = "Tank01.Level.HiHi.Acked",
+                        AckCommentSubtag = "Tank01.Level.HiHi.AckMsg",
+                        PrioritySubtag = "Tank01.Level.HiHi.Priority",
+                    },
+                },
+            },
+        };
+
+        var parsed = MxCommand.Parser.ParseFrom(original.ToByteArray());
+
+        Assert.Equal(original, parsed);
+        Assert.Equal(MxCommandKind.UpdateAlarmWatchList, parsed.Kind);
+        Assert.Equal(MxCommand.PayloadOneofCase.UpdateAlarmWatchList, parsed.PayloadCase);
+        Assert.Single(parsed.UpdateAlarmWatchList.WatchList);
+    }
+
     /// <summary>
     ///     Verifies that an <see cref="MxEvent"/> carrying an
     ///     <see cref="OnAlarmProviderModeChangedEvent"/> body (the

src/ZB.MOM.WW.MxGateway.Worker.Tests/MxAccess/AlarmCommandExecutorTests.cs

@@ -91,6 +91,27 @@ public sealed class AlarmCommandExecutorTests
         Assert.Equal(ProtocolStatusCode.InvalidRequest, reply.ProtocolStatus.Code);
     }
 
+    /// <summary>Verifies that a live watch-list replacement routes to the alarm handler on the executor thread.</summary>
+    [Fact]
+    public void UpdateAlarmWatchList_WithHandler_RoutesToHandlerAndReturnsOk()
+    {
+        FakeAlarmHandler handler = new FakeAlarmHandler();
+        MxAccessCommandExecutor executor = NewExecutor(handler);
+        var target = new AlarmSubtagTarget { AlarmFullReference = "Galaxy!Area.Tank01.Alarm" };
+
+        MxCommandReply reply = executor.Execute(new StaCommand(
+            SessionId,
+            CorrelationId,
+            new MxCommand
+            {
+                Kind = MxCommandKind.UpdateAlarmWatchList,
+                UpdateAlarmWatchList = new UpdateAlarmWatchListCommand { WatchList = { target } },
+            }));
+
+        Assert.Equal(ProtocolStatusCode.Ok, reply.ProtocolStatus.Code);
+        Assert.Equal(target, Assert.Single(handler.LastWatchList!));
+    }
+
     /// <summary>Verifies that acknowledge routes native status into hresult and payload.</summary>
     [Fact]
     public void AcknowledgeAlarm_WithHandler_RoutesNativeStatusIntoHresultAndPayload()
@@ -447,6 +468,15 @@ public sealed class AlarmCommandExecutorTests
             LastSessionId = sessionId;
         }
 
+        /// <summary>Gets the most recent replacement watch list.</summary>
+        public IReadOnlyList<AlarmSubtagTarget>? LastWatchList { get; private set; }
+
+        /// <inheritdoc />
+        public void UpdateWatchList(IReadOnlyList<AlarmSubtagTarget> watchList)
+        {
+            LastWatchList = watchList;
+        }
+
         /// <inheritdoc />
         public void Unsubscribe()
         {

src/ZB.MOM.WW.MxGateway.Worker.Tests/MxAccess/AlarmCommandHandlerTests.cs

@@ -287,8 +287,12 @@ public sealed class AlarmCommandHandlerTests
         handler.PollOnce();
         Assert.Equal(5, guardInvocations);
 
-        handler.Unsubscribe();
+        Assert.Throws<InvalidOperationException>(
+            () => handler.UpdateWatchList(Array.Empty<AlarmSubtagTarget>()));
         Assert.Equal(6, guardInvocations);
+
+        handler.Unsubscribe();
+        Assert.Equal(7, guardInvocations);
     }
 
     /// <summary>
@@ -324,6 +328,8 @@ public sealed class AlarmCommandHandlerTests
             () => handler.AcknowledgeByName("", "", "", "", "", "", "", ""));
         Assert.Throws<InvalidOperationException>(() => handler.QueryActive(null, out _));
         Assert.Throws<InvalidOperationException>(() => handler.PollOnce());
+        Assert.Throws<InvalidOperationException>(
+            () => handler.UpdateWatchList(Array.Empty<AlarmSubtagTarget>()));
         Assert.Throws<InvalidOperationException>(() => handler.Unsubscribe());
     }
 
@@ -412,6 +418,114 @@ public sealed class AlarmCommandHandlerTests
         Assert.Equal(AlarmProviderMode.Subtag, evt.OnAlarmProviderModeChanged.Mode);
     }
 
+    /// <summary>An explicitly fallback-capable auto subscription builds a replaceable standby even when discovery is initially empty.</summary>
+    [Fact]
+    public void Subscribe_AutoModeWithEmptyWatchListAndFallbackEnabled_BuildsReplaceableStandby()
+    {
+        FakeConsumer primary = new FakeConsumer { AcknowledgeReturn = 11 };
+        FakeConsumer initialStandby = new FakeConsumer { AcknowledgeReturn = 22 };
+        FakeConsumer replacement = new FakeConsumer { AcknowledgeReturn = 33 };
+        int buildCount = 0;
+        AlarmCommandHandler handler = new AlarmCommandHandler(
+            new MxAccessEventQueue(),
+            () => primary,
+            threadAffinityCheck: null,
+            comFactory: null,
+            standbyFactory: _ => ++buildCount == 1 ? initialStandby : replacement);
+
+        handler.Subscribe(new SubscribeAlarmsCommand
+        {
+            SubscriptionExpression = @"\\HOST\Galaxy!Area",
+            FallbackEnabled = true,
+        }, "s1");
+        handler.UpdateWatchList(new[] { NewTarget("Galaxy!Area.Tank01.Alarm") });
+
+        Assert.Equal(2, buildCount);
+        Assert.Equal(@"\\HOST\Galaxy!Area", replacement.LastSubscription);
+        Assert.True(initialStandby.Disposed);
+        Assert.Equal(11, handler.Acknowledge(Guid.Empty, "", "", "", "", ""));
+    }
+
+    /// <summary>A replacement is rejected when no fallback-capable subscription is active.</summary>
+    [Fact]
+    public void UpdateWatchList_WithoutFallbackCapableSubscription_Throws()
+    {
+        AlarmCommandHandler handler = new AlarmCommandHandler(
+            new MxAccessEventQueue(),
+            () => new FakeConsumer());
+
+        Assert.Throws<InvalidOperationException>(
+            () => handler.UpdateWatchList(new[] { NewTarget("Galaxy!Area.Tank01.Alarm") }));
+
+        handler.Subscribe(new SubscribeAlarmsCommand
+        {
+            SubscriptionExpression = @"\\HOST\Galaxy!Area",
+            ForcedMode = AlarmProviderMode.Alarmmgr,
+        }, "s1");
+
+        Assert.Throws<InvalidOperationException>(
+            () => handler.UpdateWatchList(new[] { NewTarget("Galaxy!Area.Tank02.Alarm") }));
+    }
+
+    /// <summary>A replacement setup failure leaves the old standby and primary mode intact.</summary>
+    [Fact]
+    public void UpdateWatchList_WhenReplacementSubscribeFails_PreservesOldStandbyAndPrimaryMode()
+    {
+        FakeConsumer primary = new FakeConsumer { AcknowledgeReturn = 11 };
+        FakeConsumer oldStandby = new FakeConsumer { AcknowledgeReturn = 22 };
+        FakeConsumer failedReplacement = new FakeConsumer { ThrowOnSubscribe = true, AcknowledgeReturn = 33 };
+        int buildCount = 0;
+        AlarmCommandHandler handler = new AlarmCommandHandler(
+            new MxAccessEventQueue(),
+            () => primary,
+            null,
+            null,
+            _ => ++buildCount == 1 ? oldStandby : failedReplacement);
+        SubscribeAlarmsCommand subscribe = new SubscribeAlarmsCommand
+        {
+            SubscriptionExpression = @"\\HOST\Galaxy!Area",
+            FallbackEnabled = true,
+        };
+        subscribe.WatchList.Add(NewTarget("Galaxy!Area.Tank01.Alarm"));
+        handler.Subscribe(subscribe, "s1");
+
+        Assert.Throws<InvalidOperationException>(
+            () => handler.UpdateWatchList(new[] { NewTarget("Galaxy!Area.Tank02.Alarm") }));
+
+        Assert.False(oldStandby.Disposed);
+        Assert.True(failedReplacement.Disposed);
+        Assert.Equal(11, handler.Acknowledge(Guid.Empty, "", "", "", "", ""));
+    }
+
+    /// <summary>A successful replacement while failed over keeps subtag mode active and delegates to the new standby.</summary>
+    [Fact]
+    public void UpdateWatchList_WhileSubtagActive_PreservesModeAndUsesReplacement()
+    {
+        FakeConsumer primary = new FakeConsumer { ThrowOnSubscribe = true, AcknowledgeReturn = 11 };
+        FakeConsumer oldStandby = new FakeConsumer { AcknowledgeReturn = 22 };
+        FakeConsumer replacement = new FakeConsumer { AcknowledgeReturn = 33 };
+        int buildCount = 0;
+        AlarmCommandHandler handler = new AlarmCommandHandler(
+            new MxAccessEventQueue(),
+            () => primary,
+            null,
+            null,
+            _ => ++buildCount == 1 ? oldStandby : replacement);
+        SubscribeAlarmsCommand subscribe = new SubscribeAlarmsCommand
+        {
+            SubscriptionExpression = @"\\HOST\Galaxy!Area",
+            FallbackEnabled = true,
+            Failover = new AlarmFailoverConfig { ConsecutiveFailureThreshold = 1 },
+        };
+        subscribe.WatchList.Add(NewTarget("Galaxy!Area.Tank01.Alarm"));
+        handler.Subscribe(subscribe, "s1");
+
+        handler.UpdateWatchList(new[] { NewTarget("Galaxy!Area.Tank02.Alarm") });
+
+        Assert.True(oldStandby.Disposed);
+        Assert.Equal(33, handler.Acknowledge(Guid.Empty, "", "", "", "", ""));
+    }
+
     /// <summary>
     ///     A non-failover subscribe (alarmmgr-only) never enqueues a
     ///     provider-mode-changed event, and a subsequent Unsubscribe detaches
@@ -467,6 +581,14 @@ public sealed class AlarmCommandHandlerTests
         };
     }
 
+    private static AlarmSubtagTarget NewTarget(string alarmFullReference) => new AlarmSubtagTarget
+    {
+        AlarmFullReference = alarmFullReference,
+        ActiveSubtag = alarmFullReference + ".InAlarm",
+        AckedSubtag = alarmFullReference + ".Acked",
+        AckCommentSubtag = alarmFullReference + ".AckMsg",
+    };
+
     private sealed class FakeConsumer : IMxAccessAlarmConsumer
     {
 #pragma warning disable CS0067 // Event never invoked — fake; AlarmCommandHandler tests don't drive transitions.

src/ZB.MOM.WW.MxGateway.Worker.Tests/MxAccess/MxAccessStaSessionTests.cs

@@ -651,6 +651,11 @@ public sealed class MxAccessStaSessionTests
             LastSubscription = command.SubscriptionExpression;
         }
 
+        /// <inheritdoc />
+        public void UpdateWatchList(IReadOnlyList<AlarmSubtagTarget> watchList)
+        {
+        }
+
         /// <inheritdoc />
         public void Unsubscribe()
         {

src/ZB.MOM.WW.MxGateway.Worker/MxAccess/AlarmCommandHandler.cs

@@ -45,6 +45,7 @@ public sealed class AlarmCommandHandler : IAlarmCommandHandler
     private FailoverAlarmConsumer? failoverConsumer;
     private EventHandler<AlarmProviderModeChange>? providerModeChangedHandler;
     private string subscribeSessionId = string.Empty;
+    private string subscriptionExpression = string.Empty;
     private bool disposed;
 
     /// <summary>Initializes a new alarm command handler with the given event queue.</summary>
@@ -153,6 +154,7 @@ public sealed class AlarmCommandHandler : IAlarmCommandHandler
             }
 
             subscribeSessionId = sessionId ?? string.Empty;
+            subscriptionExpression = command.SubscriptionExpression ?? string.Empty;
             IMxAccessAlarmConsumer consumer = BuildConsumer(command)
                 ?? throw new InvalidOperationException("Alarm consumer factory returned null.");
 
@@ -171,7 +173,7 @@ public sealed class AlarmCommandHandler : IAlarmCommandHandler
             dispatcher = new AlarmDispatcher(consumer, sink, subscribeSessionId);
             try
             {
-                dispatcher.Subscribe(command.SubscriptionExpression ?? string.Empty);
+                dispatcher.Subscribe(subscriptionExpression);
             }
             catch
             {
@@ -212,7 +214,8 @@ public sealed class AlarmCommandHandler : IAlarmCommandHandler
             return BuildStandby(watchList);
         }
 
-        if (command.ForcedMode == AlarmProviderMode.Unspecified && watchList.Count > 0)
+        if (command.ForcedMode == AlarmProviderMode.Unspecified
+            && (command.FallbackEnabled || watchList.Count > 0))
         {
             IMxAccessAlarmConsumer primary = consumerFactory()
                 ?? throw new InvalidOperationException("Alarm consumer factory returned null.");
@@ -230,6 +233,26 @@ public sealed class AlarmCommandHandler : IAlarmCommandHandler
             ?? throw new InvalidOperationException("Alarm consumer factory returned null.");
     }
 
+    /// <inheritdoc />
+    public void UpdateWatchList(IReadOnlyList<AlarmSubtagTarget> watchList)
+    {
+        if (disposed) throw new ObjectDisposedException(nameof(AlarmCommandHandler));
+        if (watchList is null) throw new ArgumentNullException(nameof(watchList));
+        threadAffinityCheck?.Invoke();
+
+        lock (syncRoot)
+        {
+            if (dispatcher is null || failoverConsumer is null)
+            {
+                throw new InvalidOperationException(
+                    "UpdateAlarmWatchList requires an active fallback-capable alarm subscription.");
+            }
+
+            IMxAccessAlarmConsumer replacement = BuildStandby(watchList);
+            failoverConsumer.ReplaceStandby(replacement, subscriptionExpression);
+        }
+    }
+
     private IMxAccessAlarmConsumer BuildStandby(IReadOnlyList<AlarmSubtagTarget> watchList)
     {
         if (standbyFactory is not null)
@@ -276,6 +299,7 @@ public sealed class AlarmCommandHandler : IAlarmCommandHandler
             DetachProviderModeChanged();
             toDispose = dispatcher;
             dispatcher = null;
+            subscriptionExpression = string.Empty;
         }
         toDispose?.Dispose();
     }

src/ZB.MOM.WW.MxGateway.Worker/MxAccess/FailoverAlarmConsumer.cs

@@ -55,7 +55,7 @@ public sealed class FailoverAlarmConsumer : IMxAccessAlarmConsumer
     }
 
     private readonly IMxAccessAlarmConsumer primary;
-    private readonly IMxAccessAlarmConsumer standby;
+    private IMxAccessAlarmConsumer standby;
     private readonly FailoverSettings settings;
 
     private Active active = Active.Primary;
@@ -103,6 +103,36 @@ public sealed class FailoverAlarmConsumer : IMxAccessAlarmConsumer
     /// </summary>
     public AlarmProviderMode Mode => mode;
 
+    /// <summary>
+    ///     Arms and attaches a replacement standby before atomically swapping
+    ///     it into the current provider mode. Setup failure disposes only the
+    ///     replacement and leaves the existing standby untouched.
+    /// </summary>
+    /// <param name="replacement">The newly built standby consumer.</param>
+    /// <param name="subscription">The retained subscription expression.</param>
+    public void ReplaceStandby(IMxAccessAlarmConsumer replacement, string subscription)
+    {
+        if (disposed) throw new ObjectDisposedException(nameof(FailoverAlarmConsumer));
+        if (replacement is null) throw new ArgumentNullException(nameof(replacement));
+
+        try
+        {
+            replacement.Subscribe(subscription ?? string.Empty);
+            replacement.AlarmTransitionEmitted += OnChildTransition;
+        }
+        catch
+        {
+            try { replacement.Dispose(); } catch { /* preserve setup failure */ }
+            throw;
+        }
+
+        IMxAccessAlarmConsumer previous = standby;
+        standby = replacement;
+
+        try { previous.AlarmTransitionEmitted -= OnChildTransition; } catch { /* best effort */ }
+        try { previous.Dispose(); } catch { /* replacement is already active */ }
+    }
+
     /// <inheritdoc />
     public void Subscribe(string subscription)
     {

src/ZB.MOM.WW.MxGateway.Worker/MxAccess/IAlarmCommandHandler.cs

@@ -7,7 +7,8 @@ namespace ZB.MOM.WW.MxGateway.Worker.MxAccess;
 /// <summary>
 ///     Per-session interface routing the worker's alarm IPC commands —
 ///     <c>SubscribeAlarmsCommand</c>, <c>AcknowledgeAlarmCommand</c>,
-///     <c>QueryActiveAlarmsCommand</c>, <c>UnsubscribeAlarmsCommand</c> —
+///     <c>UpdateAlarmWatchListCommand</c>, <c>QueryActiveAlarmsCommand</c>,
+///     <c>UnsubscribeAlarmsCommand</c> —
 ///     to the underlying <see cref="AlarmDispatcher"/>. Production binding
 ///     is <see cref="AlarmCommandHandler"/>; tests substitute a fake.
 /// </summary>
@@ -24,6 +25,13 @@ public interface IAlarmCommandHandler : IDisposable
     /// <param name="sessionId">The session identifier.</param>
     void Subscribe(SubscribeAlarmsCommand command, string sessionId);
 
+    /// <summary>
+    ///     Replace the active auto-failover subscription's subtag standby
+    ///     targets without restarting its primary provider.
+    /// </summary>
+    /// <param name="watchList">The complete replacement watch list.</param>
+    void UpdateWatchList(IReadOnlyList<AlarmSubtagTarget> watchList);
+
     /// <summary>Tear down the active subscription. No-op if not subscribed.</summary>
     void Unsubscribe();
 

src/ZB.MOM.WW.MxGateway.Worker/MxAccess/MxAccessCommandExecutor.cs

@@ -158,6 +158,7 @@ public sealed class MxAccessCommandExecutor : IStaCommandExecutor
             MxCommandKind.WriteSecured2Bulk => ExecuteWriteSecured2Bulk(command),
             MxCommandKind.ReadBulk => ExecuteReadBulk(command),
             MxCommandKind.SubscribeAlarms => ExecuteSubscribeAlarms(command),
+            MxCommandKind.UpdateAlarmWatchList => ExecuteUpdateAlarmWatchList(command),
             MxCommandKind.UnsubscribeAlarms => ExecuteUnsubscribeAlarms(command),
             MxCommandKind.AcknowledgeAlarm => ExecuteAcknowledgeAlarm(command),
             MxCommandKind.AcknowledgeAlarmByName => ExecuteAcknowledgeAlarmByName(command),
@@ -866,6 +867,30 @@ public sealed class MxAccessCommandExecutor : IStaCommandExecutor
         }
     }
 
+    private MxCommandReply ExecuteUpdateAlarmWatchList(StaCommand command)
+    {
+        if (command.Command.PayloadCase != MxCommand.PayloadOneofCase.UpdateAlarmWatchList)
+        {
+            return CreateInvalidRequestReply(command, "UpdateAlarmWatchList command payload is required.");
+        }
+        if (alarmCommandHandler is null)
+        {
+            return CreateInvalidRequestReply(
+                command,
+                "UpdateAlarmWatchList requires an alarm command handler; the worker was constructed without one.");
+        }
+
+        try
+        {
+            alarmCommandHandler.UpdateWatchList(command.Command.UpdateAlarmWatchList.WatchList);
+            return CreateOkReply(command);
+        }
+        catch (Exception ex)
+        {
+            return CreateAlarmFailureReply(command, ex);
+        }
+    }
+
     private MxCommandReply ExecuteAcknowledgeAlarm(StaCommand command)
     {
         if (command.Command.PayloadCase != MxCommand.PayloadOneofCase.AcknowledgeAlarmCommand)