Files
lmxopcua/tests/Drivers/ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests/OpcUaClientDriverScaffoldTests.cs
T
Joseph Doherty fccffd0a0f feat(opcuaclient): #676 follow-ups — endpoint rewrite, stall wire test, fast definitive-loss recovery
- Endpoint rewrite: the driver now connects to the configured host AND port (scheme
  match, advertised path kept) instead of the server-advertised URL — fixes NAT/port-map
  upstreams and lets an in-test proxy carry the session (SDK SelectEndpoint rule).
- TcpStallProxy + OpcUaClientDriverStallWireTests: the in-place blip (#670) is now
  wire-tested on loopback — one Bad, frozen read stamp, same session, identical value
  republished Good, a post-recovery change arrives, no source-time regression after
  the SDK's late backlog flush.
- Defect found by that test, fixed: a change published right after a stall rode a
  Publish response the SDK timed out and never republished, leaving the node Good on
  the pre-change value indefinitely. New trailing reconcile read (Timeout +
  KeepAliveInterval after recovery) publishes any Good value newer than the last
  accepted one, through the replay guard's mark.
- IDriverConnectionLossSource (Core.Abstractions): opt-in definitive-loss signal.
  DriverInstanceActor attaches in PreStart / detaches in PostStop and turns a raise
  into a disconnect only while Connected. OpcUaClient raises once per session on
  keep-alive BadSessionIdInvalid/BadSessionClosed/BadSessionNotActivated/
  BadServerHalted (measured: the SDK never re-opens a halted channel) or a dropped
  subscription; ambiguous codes stay with the #527 watchdog.
- Replay guard: one Information summary per recovery when the window closes
  ("dropped N late notifications across M refs"), with a timer so quiet
  subscriptions log it too.
- ReconnectPeriod deleted (options, AdminUI form, docs, tests); stored configs that
  carry reconnectPeriod still parse in the factory, probe and browser.
- Docs: OpcUaClient.md, DriverLifecycle.md, driver-specs.md, CLAUDE.md.
2026-10-11 11:35:52 -04:00

96 lines
4.5 KiB
C#

using Shouldly;
using Xunit;
using ZB.MOM.WW.OtOpcUa.Core.Abstractions;
namespace ZB.MOM.WW.OtOpcUa.Driver.OpcUaClient.Tests;
/// <summary>
/// Scaffold-level tests for <see cref="OpcUaClientDriver"/> that don't require a live
/// remote OPC UA server. The IReadable/IWritable/ITagDiscovery/ISubscribable wire-level
/// tests live in <c>OpcUaServer.IntegrationTests/OpcUaClientDriverWireTests</c>.
/// </summary>
[Trait("Category", "Unit")]
public sealed class OpcUaClientDriverScaffoldTests
{
/// <summary>Verifies that default options target the standard OPC UA port with anonymous auth.</summary>
[Fact]
public void Default_options_target_standard_opcua_port_and_anonymous_auth()
{
var opts = new OpcUaClientDriverOptions();
opts.EndpointUrl.ShouldBe("opc.tcp://localhost:4840", "4840 is the IANA-assigned OPC UA port");
opts.SecurityMode.ShouldBe(OpcUaSecurityMode.None);
opts.SecurityPolicy.ShouldBe(OpcUaSecurityPolicy.None);
opts.AuthType.ShouldBe(OpcUaAuthType.Anonymous);
opts.AutoAcceptCertificates.ShouldBeFalse("production default must reject untrusted server certs");
}
/// <summary>Verifies that default timeouts match driver specification section 8.</summary>
[Fact]
public void Default_timeouts_match_driver_specs_section_8()
{
var opts = new OpcUaClientDriverOptions();
opts.SessionTimeout.ShouldBe(TimeSpan.FromSeconds(120));
opts.KeepAliveInterval.ShouldBe(TimeSpan.FromSeconds(5));
}
/// <summary>Verifies that driver reports type and ID before connecting.</summary>
[Fact]
public void Driver_reports_type_and_id_before_connect()
{
using var drv = new OpcUaClientDriver(new OpcUaClientDriverOptions(), "opcua-test");
drv.DriverType.ShouldBe("OpcUaClient");
drv.DriverInstanceId.ShouldBe("opcua-test");
drv.GetHealth().State.ShouldBe(DriverState.Unknown);
}
/// <summary>Verifies that Initialize against unreachable endpoint transitions to Faulted and throws.</summary>
[Fact]
public async Task Initialize_against_unreachable_endpoint_transitions_to_Faulted_and_throws()
{
// RFC 5737 reserved-for-documentation IP; won't route anywhere. Pick opc.tcp:// so
// endpoint selection hits the transport-layer connection rather than a DNS lookup.
var opts = new OpcUaClientDriverOptions
{
// Port 1 on loopback is effectively guaranteed to be closed — the OS responds
// with TCP RST immediately instead of hanging on connect, which keeps the
// unreachable-host tests snappy. Don't use an RFC 5737 reserved IP; those get
// routed to a black-hole + time out only after the SDK's internal retry/backoff
// fully elapses (~60s even with Options.Timeout=500ms).
EndpointUrl = "opc.tcp://127.0.0.1:1",
Timeout = TimeSpan.FromMilliseconds(500),
AutoAcceptCertificates = true, // dev-mode to bypass cert validation in the test
};
using var drv = new OpcUaClientDriver(opts, "opcua-unreach");
await Should.ThrowAsync<Exception>(async () =>
await drv.InitializeAsync("{}", TestContext.Current.CancellationToken));
var health = drv.GetHealth();
health.State.ShouldBe(DriverState.Faulted);
health.LastError.ShouldNotBeNull();
}
/// <summary>Verifies that Reinitialize against unreachable endpoint re-throws the error.</summary>
[Fact]
public async Task Reinitialize_against_unreachable_endpoint_re_throws()
{
var opts = new OpcUaClientDriverOptions
{
// Port 1 on loopback is effectively guaranteed to be closed — the OS responds
// with TCP RST immediately instead of hanging on connect, which keeps the
// unreachable-host tests snappy. Don't use an RFC 5737 reserved IP; those get
// routed to a black-hole + time out only after the SDK's internal retry/backoff
// fully elapses (~60s even with Options.Timeout=500ms).
EndpointUrl = "opc.tcp://127.0.0.1:1",
Timeout = TimeSpan.FromMilliseconds(500),
AutoAcceptCertificates = true,
};
using var drv = new OpcUaClientDriver(opts, "opcua-reinit");
await Should.ThrowAsync<Exception>(async () =>
await drv.InitializeAsync("{}", TestContext.Current.CancellationToken));
await Should.ThrowAsync<Exception>(async () =>
await drv.ReinitializeAsync("{}", TestContext.Current.CancellationToken));
}
}