Joseph Doherty 463c5a4320 Phase 3 PR 48 -- DL205 CDAB word order for Float32 end-to-end test. The driver has supported ModbusByteOrder.WordSwap (CDAB) since PR 24 for all multi-register types -- the underlying word-swap code path was already there. PR 48 closes the loop with an integration test that validates it end-to-end against the dl205 pymodbus profile: HR[1056..1057] stores IEEE-754 1.5f with the low word at the lower address (0x0000 at HR[1056], 0x3FC0 at HR[1057]). Reading with WordSwap returns 1.5f; reading with BigEndian returns a tiny denormal (~5.74e-41) -- a silent "value is 0" bug that typically surfaces in the field only when an operator notices a setpoint readout stuck at 0 while the PLC display shows the real value. Test asserts both: WordSwap==1.5f AND BigEndian!=1.5f, proving the flag is not a no-op. No driver code changes -- the word-swap normalization at NormalizeWordOrder() has handled Float32/Int32/UInt32 correctly since PR 24 and the unit test suite already covers it (Int32_WordSwap_decodes_CDAB_layout + Float32 equivalent). This PR exists primarily to lock in the integration-level validation so future refactors of the codec don't silently break DL205/DL260 floats. 6/6 DL205 integration tests pass with MODBUS_SIM_PROFILE=dl205.

2026-04-18 21:51:15 -04:00

3.0 KiB

Raw Permalink Blame History

View Raw