Task 26 — the P2 milestone gate. Ran the live /run verification on an isolated
docker-dev rig (project otopcua-mqtt, ports 9210/4850-4851/14350, image built
from this branch) against the real Mosquitto TLS+auth broker and the C#
Sparkplug edge-node simulator on 10.100.0.35, and recorded the result.
The gate found three defects. Two are the same defect class the P1 gate found
twice — a hand-maintained AdminUI surface left behind by a driver-side feature —
and the third is a pre-existing cross-driver bug that only a Sparkplug flow
could surface.
1. CRITICAL, FIXED — MqttDriverForm still shipped its P1 Sparkplug PLACEHOLDER.
Switching Mode to SparkplugB rendered a "not available yet" notice and NO
Group ID field, so with Sparkplug ingest fully shipped there was still no
way to author a Sparkplug driver from the AdminUI at all. Sparkplug.GroupId
is the driver's entire subscription filter (spBv1.0/{GroupId}/#): blank ⇒
connected, Healthy, ingesting nothing. Now authors all five Sparkplug keys,
MERGES over the existing sub-object rather than replacing it (so a key a
newer driver adds inside it survives an older AdminUI), leaves it untouched
in Plain mode, and validates the group id as the topic segment it is.
Pinned by 8 MqttDriverFormModelTests cases, verified falsifiable — 8 RED
with the fix stubbed out.
2. PRE-EXISTING + CROSS-DRIVER, FIXED — every node label in the shared
DriverBrowseTree was an <a href="#">. In a Blazor Web App, blazor.web.js's
enhanced-navigation click interceptor resolves a bare "#" against
<base href="/">, so clicking ANY browse-tree node label navigated the whole
AdminUI to "/", tore down the circuit, and destroyed the hosting modal —
losing the browse session AND the tag selection. @onclick:preventDefault
does not help: it suppresses the browser's default action, not Blazor's own
interceptor. Labels are now <button type="button">. Dates to the component's
introduction (2026-05-28) and affects EVERY driver's picker; it surfaced
only now because choosing a rebirth scope is the first flow that requires
clicking a label rather than the ▶ toggle (always a button, always fine).
3. FIXED (mitigation) — the browse tree rendered exactly once, at open, and
never again, while OpenAsync returns as soon as the SUBSCRIBE is granted.
On Sparkplug that means it is almost always empty forever, because births
are never retained. Added a Refresh button that re-reads the root against
the SAME session (nothing reconnects, nothing observed is lost, the tag
selection is kept, only the armed rebirth scope is cleared).
Live gate result (all against the real broker + simulator, group OtOpcUaSim):
- driver authored end-to-end through the fixed MqttDriverForm; blob is
Mode:SparkplugB + Sparkplug.GroupId:OtOpcUaSim with enums as names
- browse: BROWSER OPEN chip, Sparkplug-only rebirth panel, tree renders
Group → EdgeNode → [Device] → Metric with the device folder Filler1 and
node-level metric leaves SIDE BY SIDE, and "Node Control/Rebirth" as ONE
leaf (the metric-name-is-not-a-topic-segment rule holding)
- rebirth: group scope names the group + the 32-node cap, Cancel published
NOTHING (simulator log unchanged); edge-node scope → "1 command published"
and the simulator logged "rebirth NCMD #1 received; republishing metadata";
group scope → "2 commands published", both edge nodes re-birthed; a device
and a metric both resolve UP to "edge node EdgeA"; the panel does NOT render
for a Plain MQTT device
- browse-commit wrote bindable tuples with no topic/address key —
{"groupId","edgeNodeId","metricName","deviceId"} for the device metric and
deviceId ABSENT (not blank) for the node-level one, datatypes inherited from
the birth (Int64 / Float)
- deployed (Sealed), and both nodes served live changing values through OPC UA
at the 2 s cadence — Good 0x00000000, no BadNodeIdUnknown
- death→STALE: stopping the simulator drove both nodes to 0x80000000 with an
empty value ~2 s later, and restarting it recovered them to Good on the new
birth (FillCount back to its birth-declared 1000, then counting)
- rediscovery fired exactly TWICE (once per authored scope: OtOpcUaSim/EdgeA
7 metrics, OtOpcUaSim/EdgeA/Filler1 3 metrics) and was then gated across
many subsequent births/rebirths — the anti-storm change gate working, and
EdgeB correctly filtered out as an unauthored scope
- tag editor: opens in SparkplugB (mode inference on reopen) with all four
descriptor fields populated; blank group → "A Sparkplug group ID is
required."; "Plant/1" rejected; "Node Control/Rebirth" ACCEPTED and saved
with the slash whole; dataType override persists and its key is ABSENT again
after selecting "(from birth certificate)"
Two things are NOT verified, and are recorded rather than claimed:
- Rediscovery is INERT in v3 and this is a platform gap, not an MQTT one:
nothing subscribes to IRediscoverable.OnRediscoveryNeeded and
DriverHostActor.HandleDiscoveredNodes hard-returns. A DBIRTH introducing a
metric does NOT change the OPC UA tree; redeploy. Verified from the driver's
log line only, exactly as far as it can be verified.
- A metric name containing "/" cannot be BROWSE-COMMITTED: the derived raw tag
Name is a RawPath segment and may not contain "/", so the spec-mandatory
"Node Control/Rebirth" is refused ("Row 3: Name must not contain '/'"). The
refusal is loud and all-or-nothing, never a silently mis-bound tag, and
Manual entry is the working path. Fixing it needs a name-sanitisation policy
with a collision answer, so it was recorded rather than guessed at.
Also left open + documented: an empty browse tree cannot arm a rebirth (the
scope comes from a tree click, and the session side already accepts a bare
{group}/{edgeNode} — only a UI path is missing); _canRebirth is captured at
browse-open; the tag editor injects the Plain-only payloadFormat key into a
Sparkplug blob (cosmetic — the factory routes on the tuple).
Suites: offline 1528 passed / 0 failed (581 Driver.Mqtt + 809 AdminUI + 138
Core.Abstractions); live 15/15 against the broker + simulator.
Docs: docs/drivers/Mqtt.md brought fully up to date for P2 (Sparkplug config
sub-object, both tag shapes, the ingest state machine, rediscovery, browse +
rebirth + Refresh, a Known-gaps table); Mqtt-Test-Fixture.md gains the simulator
and drops its "Sparkplug has no fixture" claims; infra/README.md §3 gains the
simulator row; CLAUDE.md gains the simulator endpoint facts; the tracking doc
marks MQTT/Sparkplug COMPLETE. docker-dev/docker-compose.mqtt.yml is the
isolated-rig overlay the gate ran on.
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
Two gaps the Task 23/24 review found, both blocking Task 26's live gate.
Gap 1 — browse-commit produced a silently dead MQTT tag. RawBrowseCommitMapper
had no `Mqtt` case, so a committed leaf fell through to the generic
`{"address": …}` key. Neither MqttTagDefinitionFactory entry point reads
`address`: the tag deployed clean and reported BadNodeIdUnknown forever, with
no signal at commit time. Predates Task 23 (Plain was affected too), but Task 23
built the Sparkplug metric tree precisely so an operator could browse and commit
a binding.
The address is a DESCRIPTOR, not a reference string, and it cannot be recovered
from the browse node id: `{group}/{node}[/{device}]::{metric}` where a metric
name legitimately contains `/` (`Node Control/Rebirth`) — the ambiguity
MetricSeparator's remarks already name. So the session STATES it, via a new
`AttributeInfo.AddressFields` seam, and the mapper reads it. Which keys are
emitted is also how the mapper learns Plain vs Sparkplug — the driver type
reaching it is just `Mqtt`, and the mode lives on the driver config. Key names
are single-sourced in the new `MqttTagConfigKeys` (producer, mapper, factory),
with the literals pinned by a test so a symmetric rename cannot silently unbind
already-persisted blobs. A leaf with no stated address is refused at commit in
words rather than committed dead.
Gap 2 — RequestRebirthAsync had no UI. Task 23 shipped it backend-only; Task 26
step 1 assumes the button, and Task 25's runbook notes the picker tree stays
empty until a birth lands, so it is the only way to fill it on demand. Added to
the /raw browse modal: scope = the clicked tree node (device/metric resolve up to
their edge node, group fans out and is refused whole past 32), an explicit
two-click confirm naming the resolved scope and its consequence, the outcome or
the refusal shown rather than swallowed. Offered only for a Sparkplug session
(new `IRebirthCapableBrowseSession.RebirthAvailable` — one session class serves
both modes, so a type test alone would draw a button that can only throw) and
only to a DriverOperator; the server-side gate remains the boundary.
Tests: MQTT 545 → 581, AdminUI 781 → 800. The round-trip tests feed the emitted
blob to the REAL factory and were falsified by mutating the emitted key name.
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
The P1 live gate had to insert MQTT driver config directly via SQL: DriverConfigModal and
DeviceModal both fell through to "No typed config form for driver type Mqtt" with no raw-JSON
fallback, so broker host/port/TLS/credentials were unauthorable from the AdminUI. Task 12 built
the *tag* editor; these are the driver + device surfaces.
MqttDriverForm authors the whole MqttDriverOptions connection surface (host/port/clientId,
TLS + CA pin, credentials, protocol version/clean-session/keep-alive, connect timeout, reconnect
backoffs, mode, maxPayloadBytes, and the Plain sub-object). The Sparkplug sub-object stays P2 —
a marked placeholder mirroring MqttTagConfigEditor's stub, with any existing sparkplug keys
preserved untouched.
The connection is authored on the DRIVER, not the device — unlike Modbus/S7/OpcUaClient and
contrary to what docs/drivers/Mqtt.md said. DriverDeviceConfigMerger merges a device's keys up
only when the driver has exactly ONE device, so a device-authored broker connection vanishes
silently the moment a second device is added. MqttDeviceForm is therefore informational (the
GalaxyDeviceForm shape) and round-trips DeviceConfig verbatim; it flags legacy connection keys
left on a device by a pre-form deployment, because those still win via merge-up.
Serialization goes through the ONE shared MqttJson.Options instance (Task 9's decision), never a
fifth per-form copy — pinned by an assertion that an ordinal-only reader CANNOT bind the emitted
blob, and by extending the fleet-wide DriverPageJsonConverterTests guard to resolve a form's
serializer from an explicit external-instance registry when it has no _jsonOpts field. Dropping
the converter from MqttJson.Options reddens 3 tests and leaves the symmetric round-trip green —
the Task 9 lesson, reproduced.
RawTags is stripped from the emitted blob (the deploy artifact owns it) and unknown top-level
keys survive a load->save. Validation mirrors the driver's own [Range] bounds inline, and
ToOptions() additionally clamps, so an ignored error still cannot persist a
connectTimeoutSeconds:0 driver-brick. A non-blank clientId raises the P1 live-gate warning
inline (fixed ids make redundant pair nodes evict each other while both report Healthy).
AdminUI 761/761 green (was 730), TWAE-clean; Driver.Mqtt 266/266 green.
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
Task 14 — the P1 milestone gate. Ran the live /run verification on a docker-dev
rig against the real Mosquitto TLS+auth fixture, and recorded the result.
The gate did its job: it found MQTT was unauthorable in production.
RawDriverTypeDialog's driver-type list is a hand-maintained array that nobody
added MQTT to, so the /raw "New driver" picker never offered it — with every
other layer (contracts, driver, browser, factory, host registration, typed tag
editor) complete and 266 green unit tests. Nothing tied that array to
DriverTypeNames and AdminUI has no bUnit, so no offline test could see it.
Fixed, plus RawDriverTypeDialogParityTests: a reflection parity guard that
fails for ANY DriverTypeNames entry missing from the picker. Verified
falsifiable — RED with "…cannot be authored from the /raw New-driver picker,
so they are unreachable in production: Mqtt" before the one-line fix.
A second gap is left OPEN and documented, not fixed (no task ever covered it):
MqttDriverForm / MqttDeviceForm do not exist, and DriverConfigModal/DeviceModal
have no raw-JSON fallback — so an operator can create an MQTT driver but cannot
author its broker endpoint or credentials. P1 is not operator-complete until
those two razor forms land. The gate authored config via SQL to get past it.
Live gate result (isolated 2-node MAIN stack, image built from this branch,
fixture at 10.100.0.35:8883, AllowUntrustedServerCertificate rather than
pinning the CA into the rig):
- typed MQTT tag editor renders and round-trips; Json shows the JSON-path
field, Raw/Scalar hide it; wildcard topic a/+/c blocked at save; data-type
list offers Float64 and no Double; qos/retainSeed absent on "(driver
default)" and qos:2 written as a number; isHistorized/historianTagname
survive a topic-only edit; SparkplugB renders the P2 placeholder and
switching back keeps Plain values; jsonPath is guidance not a gate in all
three shapes ($ seeded only for a brand-new blank tag, blank stays absent,
clearing saves fine)
- deployed, and both editor-written blobs resolved and served changing live
values through OPC UA (22.8 / 1629, StatusCode Good) — no BadNodeIdUnknown
- the bespoke #-observation browser drove a real broker session and rendered
the fixture's actual topic tree (line1/{counter,state,temperature},
noise/chatter, retained/seed); a Modbus device's picker still correctly
reports "Browsing unavailable"
Also found live and documented (not a code change): both nodes of a redundant
pair run the driver, so a FIXED clientId makes them evict each other forever —
the broker logs "already connected, closing old connection" and both nodes
reconnect every ~2s while still reporting Healthy. Unset (the default) is
correct; confirmed 0 reconnects/60s on both nodes after removing it.
Suites: offline 1134 passed / 0 failed (266 Driver.Mqtt + 730 AdminUI incl. the
3 new guards + 138 Core.Abstractions); live 7/7 against the fixture.
Docs: new docs/drivers/Mqtt.md + Mqtt-Test-Fixture.md (the per-driver + fixture
convention every other driver follows), MQTT rows in docs/drivers/README.md,
TestConnectProbes.md, root README.md, and infra/README.md §3.
CLAUDE.md drift corrected while adding the MQTT endpoints:
- the "every fixture carries project: lmxopcua" claim was false — only the
MQTT fixture does; the filter returns one stack, not the fleet
- lmxopcua-fix.ps1 is Windows-VM-only; on macOS drive the host over ssh/rsync
(and the docker-dev rig itself runs locally under OrbStack)
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
Per-plan copy-paste command (subagent-driven-development in a git worktree),
plus the slash-command and executing-plans/resume alternatives, and a note that
the four independent plans can run in concurrent worktrees.
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
Add a living progress tracker (docs/plans/2026-07-24-driver-expansion-tracking.md)
for the driver-expansion program's Waves 0-2, linked from the program design doc's
document map. One row per deliverable pointing at design + implementation plan + status.
Add executable implementation plans (plan .md + co-located .tasks.json) for the four
Wave 1/2 drivers, each authored by writing-plans methodology off its design doc and
mirroring the relevant existing driver:
- Modbus RTU 11 tasks (extends Driver.Modbus; RTU-over-TCP, direct-serial descoped)
- SQL poll 22 tasks (ISqlDialect seam, SQL Server only in v1; SQLite + central-SQL fixtures)
- MTConnect Agent 23 tasks (browse free via Wave-0 seam; TrakHound-vs-hand-rolled = Task 0)
- MQTT/Sparkplug B 27 tasks (P1 plain MQTT 0-14 then P2 Sparkplug 15-26; MQTTnet-5 pinning spike = Task 0)
Wave 0 (universal browser) remains merged (056887d6) with its live gate open (#468).
All four new plans are design-only -> plan-ready; nothing built yet.
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
The simultaneous-cold-start split-brain, carried as a Phase 7 "candidate follow-up,
not shipped", is now closed by the opt-in Cluster:BootstrapGuard (279d1d0f). Documents
the guard in CLAUDE.md's bootstrap section and marks the Phase 7 finding closed.
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
Closes the residual Phase-7 gap: when BOTH nodes of a 2-node pair cold-start at the
same instant, each self-first seed runs FirstSeedNodeProcess, times out waiting for
the other, and forms its own 1-node cluster — two Primaries in one pair (the Phase 6
live gate reproduced this reliably on docker). The prior mitigation was operational
(staggered start / compose depends_on), which does not exist on production hardware.
The guard (dark switch Cluster:BootstrapGuard:Enabled, default OFF) prevents the split
without giving up cold-start-alone:
- The lower-address node is the preferred founder: self-first, forms immediately.
- The higher node probes its partner's Akka port (TCP connect) up to PartnerProbeSeconds:
reachable => peer-first (join the founder, never race it); unreachable => self-first
(partner is dead, form alone). The order is decided BEFORE the single JoinSeedNodes,
from an explicit reachability signal — never re-formed mid-handshake (the retired
SelfFormAfter failure mode). When on, Akka gets no config seeds (BuildClusterOptions)
and ClusterBootstrapCoordinator drives the join.
Review-driven hardening: case-insensitive tie-break (a hostname-casing mismatch would
reopen the split); fail-fast validation of the timing knobs; the residual "founder dies
in the probe->join window" hang is documented and made operator-visible (warning + a
restart recovers). Real-ActorSystem coordinator tests cover the load-bearing higher-node
cold-start-alone case; 147/147 Cluster tests pass.
Live-gated on docker-dev (site-a = enablement demo, serialization removed, guard on;
site-b keeps depends_on-serialization + guard off as the A/B control): simultaneous
start -> site-a-1 founds, site-a-2 probes-reachable-joins -> 250/240, NO split;
higher-node-alone -> probes dead founder, self-forms -> 250; founder rejoin -> 240.
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
All 6 failover drills pass on the docker-dev three-mesh rig:
- D1 MAIN graceful manual-failover via the AdminUI "Trigger failover" button —
Primary leaves, peer→250, restarts and rejoins with no split.
- D2 SITE-A auto-down failover, both directions; D3 SITE-B crash-the-oldest.
- D4 auto-down 1-vs-1 survival — every survivor stayed Up (closes the gate
deferred since Phase 0a).
- D5 self-first cold-start-alone — a node boots with its partner down and forms
its own mesh (gate b).
- D6 recovery — restarted nodes rejoin as Secondary (240).
Ships a one-page co-located operator runbook (OtOpcUa + ScadaBridge on shared
site VMs). Manual-failover button confirmed MAIN-only by construction; site
pairs (driver-only, no UI) fail over via auto-down. Carried Phase-6 finding —
simultaneous cold-start of both pair VMs can split — mitigated operationally in
the runbook (staggered start); a product-level join guard is a candidate
follow-up, not shipped.
The per-cluster mesh program (Phases 0a–7) is COMPLETE.
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
Records the full live-gate run against master on the docker-dev three-mesh rig.
All 8 legs pass: three isolated 2-node meshes, one Primary per pair (250/240),
deploy sealed acks=6 over per-cluster ClusterClient, telemetry gRPC :4056 up +
reconnect, reconciler own-cluster-scoped, secrets pair-local, split validator
refuses Dps, and per-pair failover with auto-down 1-vs-1 survival (also closes the
deferred Phase 0a gate). Three defects were caught and fixed forward (3a4ed8dd,
792f28ec) — see the live-gate doc's Findings section. Task 9 marked completed.
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
Two docker-dev-only defects the Phase 6 live gate surfaced (both invisible to
`docker compose config`, which validates the file but never boots the app):
1. Driver-only site nodes crashed at boot with OptionsValidationException — LDAP
transport None + AllowInsecure false. Only central carried the Security__Ldap__*
block, but the site nodes serve OPC UA endpoints and validate LDAP options too, and
they override `environment` wholesale (YAML `<<:` doesn't deep-merge it). Extracted
the block to a shared &ldap-env anchor merged into every host node.
2. Site pairs split-brained at simultaneous startup (both nodes "JOINING itself",
250/250 instead of 250/240). Both are self-first seeds, so both run Akka's
FirstSeedNodeProcess; the partner didn't depend on its pair founder, so they raced
and each formed a 1-node cluster. Added an &akka-founder-healthcheck (bash /dev/tcp
probe of Akka 4053 — no nc/curl in the image) to site-a-1/site-b-1 and switched the
partners to depends_on service_healthy, so the founder forms first and the partner
JOINS it. (Carry the underlying simultaneous-cold-start property to Phase 7 — it is
inherent to symmetric self-first seeding, present for central since #459.)
Live gate record: docs/plans/2026-07-24-mesh-phase6-live-gate.md (legs 1-2 PASS —
three isolated meshes, one Primary per pair at 250/240).
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
Redundancy.md: KNOWN-LIMITATION (per-Akka-cluster election) marked RESOLVED;
new 'Per-cluster meshes (Phase 6)' section + pair-local secrets note; manual-
failover mesh-scope caveat removed; auto-down 1-vs-1 note updated (every mesh is
now two nodes, drill deferred to Phase 7). IManualFailoverService + ClusterRedundancy
razor caveats updated to pair-local reality. Configuration.md documents the
cluster-{ClusterId} role, per-pair self-first seeds, SplitTopologyTransportValidator,
and the intentional Dps default. Program + design status tables + CLAUDE.md marked
Phase 6 DONE.
(Task 8 subagent completed the edits but died on an API error before committing;
reviewed and committed by the controller.)
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
Phase 6 splits the fleet into one mesh per Cluster, so an admin (central)
node's Cluster.State.Members shows only its own pair — it no longer sees
site members via gossip. The ClusterNodeAddressReconciler singleton compared
live membership against EVERY ClusterNode row fleet-wide, so post-split every
foreign-cluster row would log EnabledRowNotInCluster forever.
Scope the actor's two DB queries to rows whose ClusterId matches the admin
node's own (IClusterRoleInfo.ClusterId, sourced at registration). A legacy
admin node with no cluster role (null ClusterId) still reconciles the whole
fleet — it genuinely sees every member via gossip. The pure Reconcile
function and AddressMismatchKind semantics are unchanged; scoping lives
entirely in the actor's queries.
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
Plan + task ledger for splitting the single fleet mesh into three 2-node
meshes (central + per-site pairs), cluster-scoped roles + redundancy
singleton, per-cluster ClusterClient, own-cluster reconciler, split-topology
transport validator + flipped defaults, pair-local secrets, and the docker-dev
rig rewrite. Decisions settled with the user 2026-07-24.
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
Full 12-stream telemetry mesh formed in Grpc mode, AdminUI pill live (data path
proven), kill-and-reconnect recovered a node's stream in ~5s; Dps baseline dials
nothing. Surfaced+validated the ClusterNode.GrpcPort upgrade-backfill gotcha.
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
Deploy sealed green with 4 DB-less site nodes acking (central persists acks);
ServiceLevel held 240 on a site node with central SQL stopped (survive-alone);
restarted site node booted last-known-good from the LocalDb pointer, no ConfigDb
read; alarm_condition_state table live + replicated. Full record in
2026-07-23-mesh-phase4-live-gate.md. Task 9 (drop dead table) deferred.
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
Task 4+6 code review re-surfaced the OpcUaPublishActor raw-sink wipe on a
null-factory node (the exact #485/#486 defect Task 3 fixes) — Task 3 must land
before any node flips to FetchAndCache. Ordering already enforces this
(3 → 7 → 10 → 11).
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
Nullable ConfigDb factory; UpsertNodeDeploymentState no-ops when absent
(central persists acks from the ApplyAck); scripted-alarm condition state
served from the LocalDb store instead of the ConfigDb-backed Ef store.
Combines Phase-4 Tasks 4 + 6. Removes the interim dbFactory! cast.
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
Task 2 code review surfaced two unguarded ConfigDb sites reachable on a
driver-only node once Tasks 0+1 landed (SpawnScriptedAlarmHost's Ef store,
unconditional UpsertNodeDeploymentState). Task 4 brief now names them + the
dbFactory! removal; Task 6 re-homes the alarm store to LocalDb.
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
Phase 4 of the per-cluster mesh program. Removes the four remaining driver-side
ConfigDb consumers + the registration itself so a driver-only node boots with no
ConfigDb connection string:
- ConfigDb registered iff hasAdmin (Program.cs); driver-only requires none
- driver-only ⇒ FetchAndCache mandatory (validator)
- DbHealthProbeActor not spawned on driver-only; DbReachable=true constant
(client-visible ServiceLevel change — a healthy DB-less node publishes 240/250
with central down, per user decision 2026-07-23)
- DriverHostActor: nullable factory, drop redundant SQL ack-writes (central's
PersistNodeAck is the ack system of record)
- EfAlarmConditionStateStore → LocalDbAlarmConditionStateStore (new replicated
alarm_condition_state table)
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
Phase 3 Task 9. docker-dev rig: central-1/2 carry ConfigServe (:4055 h2c + committed
dev key) and stay Direct; the four site nodes carry ConfigSource (both central
endpoints + matching key) defaulting to Direct. Flip only the site nodes with
OTOPCUA_CONFIG_MODE=FetchAndCache at 'docker compose up' — central keeps SQL and models
the target topology. Binding :4055 activates the dedicated-h2c Kestrel takeover on
central (re-binds :9000 too). Docs: new docs/Configuration.md ConfigSource/ConfigServe
section; docs/Redundancy.md 'config bytes travel out-of-band' note; the program plan
Phase 3 section + tracking row flipped to CODE-COMPLETE; a CLAUDE.md 'Config source'
section.
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
Eleven tasks. User decisions baked in: gRPC fetch RPC (not token-gated HTTP),
shared node bearer key (not a per-deployment token, so no migration and
DispatchDeployment is unchanged), a ConfigSource:Mode dark switch (Direct
default), both pair nodes fetch (no Primary gating). Header carries the five
recon facts and the Phase 3/4 boundary (config READS only; the NodeDeploymentState
write, DbHealthProbe and EfAlarmConditionStateStore stay for Phase 4).
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
Flipped the docker-dev rig end-to-end to MeshTransport:Mode=ClusterClient
(OTOPCUA_MESH_MODE, no rebuild) and ran the gate. PASSED for the transport:
deploy seals on ClusterClient, a stopped node fails the deploy naming it, the
MaintenanceMode hatch shrinks the DB-sourced contact set live (6->5->6 on both
centrals independently), and the frame-size canary stayed silent.
Four findings, recorded in 2026-07-22-mesh-phase2-live-gate.md:
A. A 10-30s post-restart delivery window exists, but the DPS control fails
identically -- it is a cluster-convergence property, not a Phase 2
regression. Running the control is the only reason this is a note and not
a false attribution.
B. buffer-size=0's stated rationale was OVERSTATED. A node applies a TimedOut
deployment anyway -- live-observed at +44s -- via DriverHostActor.Bootstrap
replaying the orphan Applying row on restart. Zero buffering removes the
silent, timer-driven replay, not the boot-time DB one. Corrected in the
plan decisions table, Configuration.md, and CLAUDE.md; the decision stands,
the justification narrowed.
C. Stopping BOTH centrals strands the non-seed nodes at the Akka membership
layer (frozen mid-Exiting, not Unreachable, so auto-down does not help).
Transport-independent; a Phase 7 downing/rejoin drill item.
D. The AdminUI driver Restart/Reconnect buttons (DriverStatusPanel) are
rendered by no page -- orphaned since v3 Batch 2 retired /clusters/{id}/
drivers. So gate steps 6/7 could not run; the driver-control node-side leg
is proven live only because DispatchDeployment shares its EventStream path.
Step 8's planned log-signal does not exist (HandleApplyAck is silent on
success); proven instead by both centrals independently logging per-instance
ClusterClient creation, which a singleton cannot.
Also adds a repo-root .dockerignore: docker-dev/Dockerfile does COPY . ., which
was pulling .claude/worktrees (19GB of agent checkouts with their own bin/obj)
into the build context and exhausting the Docker VM disk mid-COPY.
Rig restored to Mode=Dps, six members, no leftover maintenance flags.
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
Rig: all six docker-dev nodes carry MeshTransport__Mode plus both central
contact points. Mode is "${OTOPCUA_MESH_MODE:-Dps}", so the rig still comes up
on the transport it has always used and the live gate can flip the whole fleet
at `docker compose up` without a compose edit or a rebuild.
Docs: a MeshTransport section in Configuration.md (including why contact points
are addresses only, why the contact set does not scope delivery, and why
buffer-size=0 is a behaviour decision rather than a tuning knob), a "Command
transport" section in Redundancy.md contrasting the two modes, and a summary
beside the Redundancy notes in CLAUDE.md.
Corrects the design doc's claim that ScadaBridge replies with a typed failure to
every unhandled message. Neither of their comm actors has a ReceiveAny or an
Unhandled override; the idiom is per message type and fires on a missing
registration, and an unknown type dead-letters there as it does anywhere else.
Records the exit-gate deviation in the program plan: "an Ask timing out cleanly
against a stopped node" cannot be run, because no Ask crosses this boundary. The
honest equivalents are a stopped node failing the deploy at the apply deadline
and an unreachable contact dropping the command with a Warning.
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
Phase 2 of the per-cluster mesh program: move the three central->node command
channels (deployments, driver-control, alarm-commands) and the deployment-acks
reply channel off DistributedPubSub onto Akka ClusterClient, behind a config
flag.
Recon of both repos turned up three corrections to the design doc's account of
the sister project, all folded into the plan:
- Design doc S2 claims "every unhandled message replies with a typed failure".
ScadaBridge has no ReceiveAny/Unhandled override in either comm actor; the
typed-failure idiom fires only for a MISSING REGISTRATION, per message type.
- "No central buffering" was never a setting they wrote. They have zero
akka.cluster.client HOCON and run the defaults (buffer-size 1000,
reconnect-timeout off). We choose buffer-size = 0 deliberately.
- Publish -> Send is the wrong substitution. Today's deploy notify is a
broadcast every DriverHostActor receives (no ClusterId filter exists on the
node side), so it must become SendToAll. Send would deploy to exactly one
node of the fleet and seal green on partial acks.
Also records the single-mesh duplicate-delivery trap (one ClusterClient in
Phase 2, not one per Cluster -- a receptionist serves its whole mesh) and one
deviation from the program plan's exit gate: there is no cross-boundary Ask in
Phase 2, because every migrated command is fire-and-forget with a local reply,
so "an Ask timing out cleanly" cannot be run as written.
Marks the program tracking tables current: prereq + Phase 1 are DONE (they
still read "not executed"), Phase 2 in progress.
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
Phase 1 gate step 4 failed: setting Enabled = 0 to take a node out of service
returns 422 ClusterEnabledNodeCountMismatch, because
DraftValidator.ValidateClusterTopology requires the enabled-node count to equal
ServerCluster.NodeCount. On a Warm/Hot pair — every cluster on the rig, and
every cluster in the target topology — Enabled can therefore never be the
maintenance hatch. The plan called step 4 "the check that makes step 3
acceptable to ship", so Task 3's behaviour change was not shippable as it stood:
a node down for maintenance would block every deployment to its cluster.
The two rules were each reasonable and contradictory together — the validator
reads Enabled as "part of the declared topology", Phase 1 additionally read it
as "expect an ack". Split the meanings rather than weaken either rule:
Enabled part of the declared topology (validator, untouched)
MaintenanceMode expected to participate now (coordinator + reconciler)
Rejected alternatives: counting configured rather than enabled nodes (drops the
guard against booting a pair into InvalidTopology); downgrading the rule to a
warning (weakens a deploy gate for everyone); shipping with no hatch.
Sabotage: dropping !n.MaintenanceMode from the coordinator query turns the new
test red. It also asserts both nodes remain Enabled, so the fix cannot quietly
regress to disabling the row after all.
Configuration.Tests 95/95, ControlPlane.Tests 101/101, solution builds clean.
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
- docker-dev seed: AkkaPort = 4053 on all six ClusterNode rows, so a freshly
seeded rig matches a migrated one. GrpcPort left null.
- config-db-schema.md: both columns, why AkkaPort is NOT NULL/4053 and GrpcPort
is nullable, the unenforced duplication + its reconciler, and Enabled's new
second meaning as the deploy path's expected-ack set.
- Configuration.md: Cluster:Port / PublicHostname now flag that they are stored
twice, with the "update the row too" instruction and why the drift is silent.
- design doc §7: Phase 1 marked done, plus a "Phase 1 as shipped" note recording
both deviations rather than leaving the sketch reading as what happened.
- program plan: Phase 1 marked done; AdminUI node edit explicitly deferred.
- CLAUDE.md: the deploy-path behaviour change and its three consequences.
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
Joseph Doherty