- QueueFrozenReplay re-asks each item's verdict right before each entry's gate
hold (Server-object and folder cut paths): a grant revoked between the
pre-Lock verdicts and the replay no longer lets the replay through. A denied
entry is also removed from the cut's re-sent set.
- ReportEventWithoutBlocking logs and returns on a delivery that faulted
inline instead of booking it as a deferral episode (which ran the drain and
ClearStaleRefreshCuts under the event-report gate while Lock was held).
- OnConditionReportEvent isolates failures per Server-object item.
- Tests: revocation between cut and replay (folder + Server object), throwing
hop not booked as a deferral; production-overload sampling inside Lock.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
Condition events reaching one of our notifiers no longer go through the SDK
MonitoredNode2 channel: the walk serves the attached items itself, per item and
per event (audit guard, uncached INodeManager3 verdict, item gate/cut,
QueueEvent), as the Server-object path does. No notifier of ours defers any
more; the #838 deferral queue and the #854 cut stay as the safety net and
folder items share the cut (RefreshDirectItems, flag on and off). An event
whose walk suspends is marked deferred before it suspends.
Tests produce deferral with a notifier-stall probe instead of holding a folder
item's SDK lock (which would now block the reporter). New
FolderConditionRefreshWireTests; design note in docs/plans.
Claude-Session: https://claude.ai/code/session_01GT67AD99zQQqpLCVm3p7xk
Review of 1622d07f:
1. Perf: every i=2253 refresh ran the whole notifier walk + permission checks +
QueueEvent under Lock. Now, with nothing deferred (the common case), the refresh is
the SDK-shaped walk off Lock (Lock only to copy the root notifiers), kept only if no
deferral episode existed at any moment of it (count 0 before and after, episode
unchanged); otherwise the cut path also runs and its later replay supersedes. The
cut path takes ACL/role verdicts off Lock, then one short Lock hold: watermark +
frozen snapshots of Retain conditions from _alarmConditions (no tree walk) + per-item
cut and "replay pending" marker; the replay is queued OFF Lock, one event per hold of
the item gate. While pending, a condition event newer than the cut marks its
condition so the older frozen entry is dropped rather than following it. A
concurrent fast-path refresh cancels a pending cut replay of the same item.
Measured, 3000 retained conditions, longest Lock wait seen by another thread during
one refresh: 1622d07f 95-106 ms idle / 102-127 ms deferring; now 0-3 ms idle /
23-32 ms deferring.
2. ACL: a retained condition omitted from the replay for want of a grant is never
withheld (RefreshCut.RetainedAtCut); only Retain=true events of a condition omitted
because it was NOT retained are.
3. One gate/cut state per item for its lifetime (ConditionalWeakTable keyed by the
item): an unsubscribe + resubscribe between refresh and drain keeps the cut.
4. Cuts carry their deferral episode; ClearStaleRefreshCuts runs when the count
returns to zero, and a stale-episode cut is inert.
5. Dispose guard for the custom refresh (ObjectDisposedException once disposing;
Dispose waits for refreshes in flight).
6. Docs: a refresh waits at most for one in-progress QueueEvent on the item.
Tests: resubscribe variants, ACL-grant-lands test, pending-replay probe test,
dispose test, 3000-condition Lock-hold measurement with a probe pinning that neither
path queues its replay under Lock; stress invariant tightened (never backwards outside a
refresh; each refresh ends on the newest delivered state) and tolerant of the SDK's own
BadRefreshInProgress overlap refusal. Each new test fails against its targeted mutation.
While a folder subscriber's SDK channel is full, a condition's later events wait in
its #838 deferral queue and reach i=2253 items only when the drain gets to them, off
Lock. A ConditionRefresh in that window replayed the current state, then the older
deferred events followed RefreshEnd (stale state, or a condition the refresh had just
dropped re-added until the newest drained).
- Condition events are reported as ConditionEventSnapshot (an InstanceStateSnapshot
carrying a report sequence, condition NodeId and Retain); events queued behind a
deferred report are marked Deferred.
- Server-object refresh (ConditionRefresh and ConditionRefresh2, flag on AND off) now
runs in RefreshServerObjectItems: watermark, "anything deferred?", the replay and its
queueing in ONE Lock hold, so the replay is exactly the state at the cut. Per item it
queues the replay and installs a RefreshCut under the item's gate.
- OnConditionReportEvent holds that gate across "superseded? -> QueueEvent" for
deferred events only. Withheld from that item alone: events at/below the cut whose
condition the replay re-sent, or Retain=true events of a condition it omitted; an
older Retain=false event of an omitted condition is still delivered. Queues, other
Server-object items and folder items are untouched; refresh never waits for a drain.
- Lock order Lock -> item gate -> SDK item lock, same as a synchronous report.
- Meter otopcua.opcua.condition_events.superseded.
- Folder items keep a documented residual (SDK channel backlog + memoised per-item
verdict leave no per-event hook).
Tests: ConditionRefreshDeferralWireTests (deterministic overload by holding the folder
item's SDK lock; 6 variants fail before the fix; probe-driven gate test fails with the
gate removed; concurrent reports/refreshes/stall stress test fails before the fix).
#838 review of 91e28e87:
1. Ghost events. The deferred report ran the SDK walk off Lock with no
liveness check, so an event waiting behind a full channel when a deploy
removed its condition still reached i=2253 subscribers after the NodeDeleted
(a ghost Retain alarm for ScadaBridge) and folder items. Delivery now walks
the SDK path itself (OnReportEvent, OnReportEventAsync, inverse notifiers,
then the Parent as BaseInstanceState does) re-checking before EVERY hop that
the condition is the live instance; OnConditionReportEvent checks the same,
which also stops a non-live scripted condition being admitted through its
old equipment folder (#808). A guard test pins that only NodeState and
BaseInstanceState define the walk. New wire test removes the condition in
the same Lock hold as a flood; the flag-off variant fails without the checks.
2. Back-pressure. Deferral is per condition (one condition's events stay
ordered; others are not held up). Overflow policy: coalesce, newest wins --
past 1024 waiting per condition or 65,536 total, the oldest not-yet-started
event is discarded (a condition event carries full state). Warning on
entering deferral (<=1/min), Information on draining, meters
otopcua.opcua.condition_events.deferred / .discarded{reason}.
3. Verified by decompiling SDK 2.0.1: the notifier list is snapshotted under the
node's own lock, MonitoredNode2.Dispose completes its writer (pending writes
fail with ChannelClosedException, swallowed), and the consumer catches
per-event exceptions -- no fix needed; documented.
4. ConditionRefresh does not flush deferrals; documented as a residual.
#844 review: DescribeCredential canonicalises the key id (trim, lowercase;
non-hex ids fold into one identity) and the username, since ConfigDbApiKeyStore
matches with SQL Server's case-insensitive, trailing-space-blind `=`.
#838(a): each notifier's SDK MonitoredNode2 drains a bounded channel (4096,
FullMode=Wait) and the synchronous NodeState.ReportEvent blocks when it is
full. Condition events are reported under Lock, and the delivery task takes
Lock on a verdict-cache miss (the SDK's own GetNodeMetadata, flag off too, and
#826's IsNotifierEventVisibleTo). A burst of >4096 events under one Lock hold
therefore deadlocked the node manager -- FolderEventFloodWireTests stalled at
exactly 4097 events with enforcement on AND off (so it predates #826).
ReportConditionEvent now goes through ReportEventWithoutBlocking:
ReportEventAsync completes inline while channels have room (unchanged normal
path); on overflow the report continues asynchronously holding no thread or
lock, and later reports queue behind it so events keep report order. The
deferred work holds only frozen snapshots and drains once Lock is released;
client delivery stays bounded by each item's queue.
#838(b): documented in docs/security.md that Part 3 ReceiveEvents applies to
the event's EventType and SourceNode (the SDK check, kept first), not to the
notifier; our decision is layered on top and non-condition events on a folder
item fail closed under enforcement. The reflection item stays open.
1. Orphaned subscriptions (session closed without deleting subs) have Session == null, so the public
MonitoredNode2.InvalidatePermissionCacheForSession never reached their items: a cached allow survived a
deploy, the moved alarm's events were queued and delivered on TransferSubscriptions. Each notifier's
cache is now cleared whole through the SDK's private MonitoredNode2.InvalidatePermissionCaches
(reflection, guard-tested; fallback = per-session drop + Remove/Add of session-less items).
2. The verdict is decided on the condition LIVE under the event's NodeId, not the event's own instance:
the SDK key has no instance identity, so a replaced instance's late event cached a deny its successor
inherited until the next invalidation.
3. Invalidation is skipped while enforcement is off (forced across an on/off authorizer transition) and is
one O(cache) clear per node instead of a whole-cache scan per item.
4. TagReferencingEquipment carries alarm-bearing raw tags only (TagConfigIntent.Alarm); the snapshot adopts
an OrdinalIgnoreCase set instead of copying it again.
Tests (each fails with its fix reverted): FolderEventVerdictInvalidationTests (orphan + deploy + transfer;
replaced instance's late event; ACL-off skip; SDK private-method guard), DeploymentArtifactScopePathTests
(alarm-bearing projection).
Event items on an equipment / raw device folder were fed by the SDK's MonitoredNode2 fan-out with no ACL
decision, so after a deploy moved a scripted alarm (or dropped the reference projecting a native alarm into
an equipment) the OLD folder's subscribers kept receiving it - EventId included - until the rebuild landed,
indefinitely after a failed apply.
- OtOpcUaNodeManager re-implements INodeManager3 so ValidateEventRolePermissions (the SDK's per-event,
per-item hook; base not virtual) adds IsNotifierEventVisibleTo: live condition instance, notifier still a
legitimate notifier of it, and the #586/#808 Server-object rule (IsConditionVisibleTo over
ConditionVisibilityScopes).
- The SDK memoizes that verdict per (item, event type, SourceNode): InvalidateFolderEventVerdicts runs on the
authority/authorizer setters, RevalidateMonitoredItems (deploy + timer) and CompleteAddressSpaceApply.
- ConditionRefresh on direct items goes through RefreshDirectItems (base loop + the same decision).
- New generation field TagReferencingEquipment (RawPath -> EquipmentIds, from the artifact's
UnsTagReferences via AclScopePathResolver.ResolveTagRawPath): a native alarm's wired equipment folder only
counts (folder delivery AND Server-object scopes) while the current generation still references it.
- Secondary #808 edge: UNS variables wired UNS->Raw Organizes by AddReference are tracked and always placed
as reference variables (an Area named like its equipment's id no longer narrows them).
Tests: UnsFolderScopeWireTests (moved alarm on a folder item + ConditionRefresh + rebuild; area named like
equipment id), NativeAlarmFolderEventAclWireTests (dropped reference: folder + Server object + refresh +
restore), DeploymentArtifactScopePathTests (projection). Rig/event tests now supply tag references.
Review of af5c9744:
1. UNS reference variables (s=Area/Line/Equip/Eff) of a moved or renamed
equipment stayed readable/writable under the OLD names' grants: they now
resolve as ReferenceVariable and are authorized at their split path only
while it equals their live equipment folder's placement (live chain ==
generation chain) + one name; otherwise denied (Read and Write).
2. TryPlaceScriptedCondition now also requires the owner folder's live chain
to match the generation (AuthorizeScriptedCondition gains ownerFolderChain),
so a moved equipment's alarm/children/commands follow its folder.
3. Identifiers containing NUL are denied before the decision cache, keeping
client ids disjoint from the NUL-prefixed resolved-scope keys (a client
could otherwise poison a real folder's cached verdict for its key shard).
4. An id no live node holds is Unknown: placed at [\0unknown] so only
Cluster / Namespace-uns grants decide it (a removed opaque id can no longer
split onto a same-named narrow grant; narrow grantees get no NodeDeleted for
removed UNS folders/vtags/conditions — documented); 4-segment
reference-shaped ids keep their split.
5. A wire test drives placements from DeploymentArtifact.ParseDataPlaneAuthority.
Baseline updates: #797 owner tests (unit + wire) and Sdk2RepeatedAlarmAuthority
now install folder scopes; Sdk2HistoryAuthority's UNS alias used the RAW path
as its UNS id (never minted in production) and now carries EqA/HistoryAlias.
Each new guard was falsified (reverting it fails its test).
UNS Area/Line/Equipment folders are minted under their opaque entity ids
(s=UA-/UL-/EQ-...), virtual tags under s=EQ-.../Name and scripted conditions
(+ #629 children) under s=<ScriptedAlarmId>[/...], while every UNS grant is
planted at a NAME path. DataPlaneAuthorizer split those ids, so with
Security:Acl:Enabled a narrow (Area/Line/Equipment) grant could not Browse,
Read, subscribe or HistoryRead them, and Server-object delivery never reached
it — so a narrow key never held the EventId Ack/Confirm/AddComment need.
- The generation carries UnsFolderScopes (folderId -> path + id chain), built
by DeploymentArtifact from the same AclScopePathResolver as the grants; ids
two entity kinds share are dropped; plumbed through IDataPlaneAuthoritySink.
- OtOpcUaNodeManager.ResolveUnsAclSubject reports live facts (folder id
ancestry / scripted owner binding); attached by the Authorizer setter.
- Evaluate places the subject against the CURRENT generation before the
decision cache, which now caches the walk keyed on the resolved scope.
Folders require live chain == generation chain (a moved equipment is denied
under old and new line until the rebuild). Owned nodes (vtags, conditions,
children) get owner path + a reserved segment, so Tag grants and their
Browse transit never expose them. Conditions share TryPlaceScriptedCondition
with the #797 command gate.
- Server-object visibility of a scripted condition is decided on the
condition alone, so a moved alarm cannot reach its old owner there.
Tests: UnsFolderScopeWireTests (opaque ids, end-to-end browse -> EventId ->
Acknowledge on an Equipment grant; sibling denied; Tag-only grant; moved alarm
and moved equipment stale windows). Rig tests now install folder scopes
explicitly (ServerEventRig.FolderScopes); the #797 recreate test deliberately
asserts the moved alarm is invisible to the Cluster observer in the window.
Scripted condition NodeIds are opaque ScriptedAlarmIds, so splitting them as a
topology path could never match an Equipment grant: a narrow equipment grant was
denied while a Cluster grant passed.
- OtOpcUaNodeManager binds each LIVE scripted condition instance to the
EquipmentId it was materialised under (only when it hangs under that folder);
dropped on remove / drop-recreate / equipment-subtree removal / rebuild; a
same-id re-materialise under another equipment re-parents and re-binds.
- DataPlaneAuthoritySnapshot carries EquipmentScopePaths (EquipmentId ->
[uns, Area, Line, Equipment]) decoded from the artifact by the same
AclScopePathResolver call that plants Equipment grants.
- DataPlaneAuthorizer.AuthorizeScriptedCondition re-reads key, grant and
generation per call (uncached) and evaluates at the owner path; unbound,
replaced or unplaceable owners deny under every grant. No id-split or
realm-root fallback.
- Native conditions (RawPath) and the ACL-off role gate are unchanged.
NodeIds and AlarmCommand.AlarmId are unchanged.
Sdk2OpaqueScriptedScopeBaselineTests deliberately flipped: it pinned the denial
and now pins owner-grant allow / sibling deny / cluster allow. Follow-up #808
(folder ids + Server-object event visibility for narrow UNS grants).
QuestDB modified-history reads dropped every still-pending trail row that was
not the latest at its source time, so V0->V1 (applied marker never written)
followed by V1->V2 hid the V0->V1 change for good. A pending row below the
latest is now served when the NEXT trail row at that time recorded a different
prior value (kind, value, status or the prior's server_ts) - the next change saw
what this one wrote; an orphan of a change that never landed leaves the same
prior for the next row and stays hidden. QuestDB window functions reject
VARCHAR, so the next row's prior comes from a LEFT JOIN on (ts, lead(id)).
The updater's comment and marker-failure log no longer claim modified reads
"still serve it" unconditionally.
Regression tests (QuestDB 10.0.1 throwaway container): marker lost then a
replace / delete at the same time; an orphan followed by a marker-lost retry
then a later change (orphan still dropped); the random marker-mix fuzz now
varies the recorded priors. All four fail on the old filter.
NITs:
- SqlServerHistorianValueWriter: a SqlException raised while the token is
cancelled (SqlClient's "Operation cancelled by user") is rethrown as
OperationCanceledException instead of booked as a failed write. Integration
test holds a TABLOCKX on Sample and cancels mid-INSERT; it returned false before.
- SqlServerHistorianDataUpdater.DeleteRawBatches is an Interlocked counter.
- HistoryReadEvents: an event filter whose SDK validation throws (unknown
operator) failed with the generic BadUnexpectedError; the node manager now
re-throws any failed event-filter validation as BadEventFilterInvalid.
Claude-Session: https://claude.ai/code/session_01GT67AEHd2Acv1YPwGfXEoV
HistoryReadEvents projected only EventId / SourceName / Time / ReceiveTime /
Message / Severity: a select clause asking for EventType, ConditionName or
SourceNode (what most generic alarm viewers ask for) got nulls, and the
event filter's where-clause (an OfType) was ignored.
- HistoricalEvent gains optional EventTypeName, ConditionName and AlarmId.
SqlServer, QuestDB and Gateway event reads fill them from what their
alarm writers already store (AlarmTypeName / AlarmName / AlarmId; the
gateway event Type and its AlarmName / AlarmId properties).
- The node manager maps the type name to its Part 9 event type (unknown or
non-event => AlarmConditionType), projects ConditionName, and resolves
SourceNode to the materialised condition the alarm id names (the live
events' SourceNode), else null.
- The where-clause is evaluated per event with the SDK content filter
through an IFilterTarget (OfType via the type tree; other operators
against the projected fields), after the page's cursor is taken, so
paging is unchanged.
Tested in the node manager, over a real client session (the Client.CLI has
no `historyread --events` mode yet; filed as a follow-up), and by alarm
writer -> event read round trips on SqlServer and QuestDB.
Rebased from the unpushed remed/lane-H2 branch (originally authored 2026-10-22
in session_01Ub9hGmYLQvn9XETzw7CMsT) onto current master.
Claude-Session: https://claude.ai/code/session_01GT67AEHd2Acv1YPwGfXEoV
The native-ack path is fire-and-forget after the Part 9 Acknowledge returns, so
a Galaxy ack refused for lack of a credential (#749), or rejected by MXAccess,
left the client with Good and the condition showing Acknowledged while Galaxy
was never acked. Both options from the issue, layered:
1. Synchronous refusal for what the driver can decide without I/O. New optional
IAlarmAcknowledgePreflight (Core.Abstractions); GalaxyDriver refuses an
anonymous session when the driver has no AlarmAck fallback account.
DriverHostActor publishes a condition NodeId -> owning-driver snapshot into
NativeAlarmAckPreflightView (lock-free, volatile); the node manager's new
NativeAlarmAckPreflight seam, consulted after the authz and Primary gates,
returns BadUserAccessDenied with the reason - nothing routed, applied or
reported. A keyed session is not pre-checked (its identity lives in the
Secrets store, which must not be read under the SDK lock).
2. Revert for everything else. RouteAlarmAck carries the condition NodeId;
DriverInstanceActor replies AlarmAckFailed on a refusal, a backend failure,
a driver without an alarm source, or an ack dropped while connecting /
reconnecting. DriverHostActor re-projects the condition unacknowledged via
NativeAlarmProjector.TryRevertAcknowledge, but only while the local ack is
still pending - any driver transition projected since then wins. A disabled
or unspawned driver is not reverted (unchanged).
GatewayGalaxyAlarmAcknowledger now throws DriverOperationRefusedException on a
non-zero native hresult (wrong password, no ack permission) instead of only
warning, so that case reverts too; as a refusal it neither retries nor trips
the breaker.
Tests (each fails with its fix mutated out): projector revert/supersede,
DriverHostActor refused + failed ack -> unacked AlarmStateUpdate (successful
ack control), preflight view snapshot, node-manager preflight unit test,
over-the-wire ConditionMethodEventTests (BadUserAccessDenied, no route, no
event; positive control), Galaxy preflight + hresult refusal.
Docs: Galaxy.md, AlarmTracking.md, ScriptedAlarms.md, .claude/rules/alarms.md.
Claude-Session: https://claude.ai/code/session_01GT67AEHd2Acv1YPwGfXEoV
mxaccessgw 488649c+ acknowledges by AuthenticateUser as the operator and
writing <alarm>.AckMsg, so AcknowledgeAlarmRequest now needs a real Galaxy
operator_user + operator_domain + operator_password. The OPC UA data plane is
API-key/anonymous and carries no Galaxy password, so the driver resolves the
account per ack:
1. the session's API key's Galaxy ack identity, set on AdminUI /apikeys and
held ONLY in the encrypted Secrets store
(otopcua/apikeys/<keyId>/galaxy-ack-{user,password}); a key with a user but
no password secret is refused, never silently downgraded;
2. else the driver instance's AlarmAck fallback account (DriverConfig
FallbackUser/FallbackDomain/FallbackPasswordSecretRef; secret:/${secret:}/
env:/file:/dev: only — a literal is refused);
3. else DriverOperationRefusedException: nothing is sent, never an empty
operator_user. Refusals are excluded from the resilience retry/breaker.
- Pins ZB.MOM.WW.MxGateway.Client/Contracts 0.2.1 -> 0.3.0 (vendored into
nuget-packages/ from the Gitea feed, per the local-mxgw source mapping).
- The session ApiKeyId (not a secret) rides NativeAlarmAck ->
RouteNativeAlarmAck -> RouteAlarmAck -> AlarmAcknowledgeRequest; the password
is resolved in the driver and never travels through actor messages.
- The OPC UA principal + key id are appended to the AckMsg comment
("[OPC UA: <principal>, key <id>]") and logged, so a shared fallback
account does not lose who acknowledged.
- Password never logged: GalaxyAckCredential.ToString omits it, the
acknowledger scrubs it from every gateway message it echoes and withholds
any exception that echoes it; audit rows carry only the key id.
- AdminUI: /apikeys "Ack identity" editor (set/remove; delete-key clears it),
Galaxy driver form gains the fallback section.
- Synchronous OPC UA status for a refusal is follow-up #760 (the native ack
path is fire-and-forget after the Part 9 method returns).
Tests: request mapping (password populated), password absent from logs and
exception text (mutation-checked), key-mapped / fallback / refused paths at
resolver and driver level, breaker non-trip, key-id propagation through node
manager and DriverHostActor, AdminUI service + form round-trip.
Closes#749
C1 (critical): B6 computes the plan off the pinned thread while B1 made writes
non-creating, so a value/status/alarm write for a node the in-flight plan adds
was skipped, and change-driven drivers never republish it (BadWaitingForInitialData
indefinitely; on a full rebuild every re-subscribe value landed on discarded
nodes). OpcUaPublishActor now applies writes immediately AND remembers the
latest per (realm, id) while a plan is in flight or queued (value+status
compose; alarm state/quality coalesce to the latest, which the node's delta
gate makes inert on an existing condition), replays it after each apply before
answering, and drops it once the pipeline is idle. Bounded (250k keys by
default; beyond it new keys are not held, logged once).
I2: the data-plane-authority parse runs in its own try inside the plan task; a
throw is logged and never degrades the address-space apply.
I3: the SDK's DeleteMonitoredItems releases an item's component-cache
reference on a Good delete; a tombstoned item's reference was already
released, so the delete took one from the re-created node's entry. Released
items are remembered and the orphan delete takes one back first. Event items
never held a reference (EventManager + SubscribeToEvents), so the three
event-item releases are gone.
I4: direct tests for the HistoryUpdate override's per-request updater check
and the HistoryReadEvents override's source guard (both reached by restoring
the bit after a reset - the B7 race window); fixed the false remark.
Minors: the MaterialiseAlarmCondition kind-swap tombstones the dropped
instance; a bytes-less rebuild arriving mid-plan queues behind it (replies in
order); a PlanReady/PlanFailed from a previous actor incarnation is ignored and
its requester answered degraded; the tie-cluster end bound of an uncapped read
fits against the backend ceiling (defence in depth - guarded by a sweep test);
the lock-time benchmark stays in the default run, headroom noted.
Refs #732
Claude-Session: https://claude.ai/code/session_01Ub9hGmYLQvn9XETzw7CMsT
Lane H1 follow-through: SyncAdvertisedAggregates now also calls
HistoryPaging.AdvertiseMaxReturnDataValues(Server, source
.MaxRawValuesPerRead) so HistoryServerCapabilities/MaxReturnDataValues
(i=11273) follows the historian source on every assignment (the Null
default advertises 0 = no limit); a false return logs a Warning (the cap
is enforced by HistoryRead regardless).
Test: NodeManagerMaxReturnDataValuesSyncTests reads i=11273 back through
the SDK master node manager after setting a capped source (7000, 250)
and after resetting to the Null source (0).
Refs #732#736
Claude-Session: https://claude.ai/code/session_01Ub9hGmYLQvn9XETzw7CMsT
H1 fuzz finding (routed to Lane B because AppendEndBoundAsync lives in
OtOpcUaNodeManager.cs): a bounded HistoryRead-Raw page sized BELOW
NumValuesPerNode by the backend's row ceiling (RawPageLimit.Plan) took
the end bound whenever its data fitted, because the fit was judged
against NumValuesPerNode instead of the page's effective cap — a full
ceiling-sized page came back with cap + 1 values. The bound is now
fitted against the page allowance (the ceiling-adjusted data cap plus
the start bound a first page already carries); when the page is full
the bound goes to the next page through the continuation point.
Test: NodeManagerHistoryReadBoundsTests
.A_full_ceiling_sized_page_carries_the_end_bound_on_the_next_page
(ceiling 4 ⇒ 3 data rows; first page = start bound + 3 with a CP, second
page = the end bound alone; control: no ceiling ⇒ one page of 5).
Refs #732#736
Claude-Session: https://claude.ai/code/session_01Ub9hGmYLQvn9XETzw7CMsT
Review 01 U3. EnsureFolderIsEventNotifier granted the EventNotifiers
.HistoryRead bit (and registered the event-history source) only when a
real HistorianDataSource was wired at promotion time, and EnsureVariable
composed the AccessLevels.HistoryWrite bit from whether a
HistorianDataUpdater existed at materialise time — so an assignment
after the first apply left existing folders without event history and
existing nodes refused by the SDK's HistoryUpdate admission until a full
rebuild, and a source reset to Null never took the bit back.
The two setters now re-evaluate: HistorianDataSource walks every promoted
folder (bit + source registration, both directions), HistorianDataUpdater
recomposes the AccessLevel of every historized variable (Writable read
back off the node's own CurrentWrite bit). The Host's boot ordering is no
longer load-bearing.
Tests: NodeManagerCapabilityRefreshTests (late source lights the bit on
an already-promoted folder and a reset takes it back, live-event
subscription untouched; late updater grants HistoryWrite to historized
nodes only and a reset takes it back, authored Writable preserved).
Refs #732
Claude-Session: https://claude.ai/code/session_01Ub9hGmYLQvn9XETzw7CMsT
Review 01 L3/H5/H4/P6/P4.
- L3/H5 OnEquipmentTagWrite's dispatch is factored into DispatchDeviceWrite:
a gateway that throws synchronously is refused inline with
BadDeviceFailure (it used to escape the handler under the SDK Lock), and
a faulted/cancelled dispatch task has its exception observed and logged
and carries the real reason into the revert/audit event instead of
surfacing as UnobservedTaskException at finalization.
- H4 every timestamp the manager stamps (condition quality, timed-shelve
expiry, method-transition events, carry-over, revert, revalidation)
reads the injected Clock; RemainingShelveMs takes the clock reading.
- P6 OpcUa:Quotas:* (OpcUaQuotaOptions on OpcUaApplicationHostOptions):
Min/MaxRequestThreadCount, MaxQueuedRequestCount with the former
hard-coded 5/100/200 as defaults, and the TransportQuotas members as
nullable overrides over the SDK defaults.
- P4 the SDK line exposes IHistoryReadAsyncNodeManager but CustomNodeManager2
offers no async virtual to override (adopting it means re-implementing
the base dispatcher), so the lever is the admission cap:
MaxConcurrentHistoryReadBatches defaults to clamp(2*ProcessorCount, 4, 16).
The Host still overrides it from ServerHistorianOptions (default 16) —
follow-up F3.
Tests: NodeManagerWriteDispatchTests (sync throw refused; faulted task
reverts; success leaves the value; clock-stamped revert),
OpcUaApplicationHostQuotaTests.
Refs #732
Claude-Session: https://claude.ai/code/session_01Ub9hGmYLQvn9XETzw7CMsT
Review 01 P1/P2/P3/P5 — work done under the manager-wide SDK Lock on the
pinned publish thread, where every Read/Browse/Publish waits.
- P1 RebuildAddressSpace detaches the shared root's top-level children
once instead of every leaf from its parent (NodeState.RemoveChild is a
linear scan + RemoveAt, ~k²/2 compares per k-child folder); root
notifiers are cleared as a list instead of one O(F) RemoveRootNotifier
each; ForgetPredefinedSubtree / TombstoneMonitoredSubtree are iterative
with one child buffer.
- P2 RemoveEquipmentSubtree walks a parent→children index maintained by
EnsureFolder/EnsureVariable/MaterialiseAlarmCondition (keyed by the
parent id the caller named) instead of prefix-scanning six maps per
removed equipment; a surviving condition's wiring into a removed folder
is found through the folder's own notifier list; descendants are not
detached from a folder that is itself being discarded.
- P3 LowerAllEventsMonitoring(condition) replaces the full O(C) reconcile
on RemoveAlarmConditionNode / RemoveEquipmentSubtree / the kind-swap.
- P5 AlarmNotifierWiring.Folders is a reference-identity HashSet and an
already-wired pair skips the SDK's linear AddNotifier dedup.
Benchmark (NodeManagerLockTimeBenchmarkTests, M-series Mac under load,
three runs each): rebuild of a 10k-tag folder 75–150 ms → 5–6 ms;
removing 200 equipment (250 signals each) from a 50k-node space
471–681 ms → 58–64 ms; all-events bookkeeping visits for 10 condition
removals over 50 conditions 900 → 10. The two timing legs assert < 1 s;
the P3 leg asserts the visit count (machine-independent).
Refs #732
Claude-Session: https://claude.ai/code/session_01Ub9hGmYLQvn9XETzw7CMsT
Review 01 L2. The SDK keys its fan-out lists by NodeId and its component
cache hands back the CACHED NodeState for a NodeId it already holds, so a
rebuild or a surgical remove+re-add left a NEW item on the same NodeId —
from any session — bound to the DEAD node: created Good, fed its stale
initial value, never again, until every session had deleted its items.
Every removal path (RebuildAddressSpace, RemoveVariableNode,
RemoveAlarmConditionNode incl. the condition's instance-scoped children,
RemoveEquipmentSubtree) now queues BadNodeIdUnknown to the node's data
items, drops the MonitoredNodes entry, releases each item's component
cache reference and forgets the _liveItems/_eventItems entries. Items
the ACL pass stood down (on no fan-out list) are swept by NodeId. A later
client delete of an orphaned item is completed by the DeleteMonitoredItem
override / the SubscribeToEvents unsubscribe arm instead of answering
BadMonitoredItemIdInvalid or NRE-ing in MonitoredNode2.Remove. The
revalidation restore re-resolves the node by NodeId and no longer
re-attaches to Handle.Node blindly. Timestamps now come from the injected
Clock (UtcNow).
Tests: StaleMonitoredNodeWireTests (real SDK, three legs: rebuild,
surgical remove+re-add, second session; each keeps the old item alive,
proves the new item receives a value written after its creation, the old
one gets BadNodeIdUnknown, and its delete succeeds — all three fail with
the tombstone neutered), NodeManagerStaleMonitoredNodeTests (stood-down
item swept on surgical remove and rebuild; sibling removal leaves it
restorable).
Refs #732
Claude-Session: https://claude.ai/code/session_01Ub9hGmYLQvn9XETzw7CMsT
Review 01 L1/L4/H2. WriteValue/WriteValues are non-creating (an unknown
id is skipped, counted and Debug-logged, as WriteStatuses always was), so
a driver publish racing a surgical remove can no longer resurrect the id
as a flat BaseDataType phantom under the shared root — nor hand a later
re-add of the same tag the phantom's parent/DataType/writability through
EnsureVariable's early return. WriteAlarmCondition for an unmaterialised
id is a logged no-op instead of minting the legacy bool[2] placeholder
(AddPredefinedNode is AddOrUpdate, so it replaced the SDK lookup entry of
any folder sharing the id). The applier no longer writes a condition
state against every removed equipment id (a folder, never a condition).
EnsureFolder/EnsureVariable/MaterialiseAlarmCondition refuse an id already
held by another node kind in the same realm. CreateVariable is deleted.
Tests: NodeManagerPhantomNodeTests (publish racing a remove leaves no
node; the re-add gets the authored shape and is live; unknown alarm id
is a no-op; the guard in all three directions, realm-qualified); the
sink / batch-write / write-statuses tests now declare their variables.
Refs #732
Claude-Session: https://claude.ai/code/session_01Ub9hGmYLQvn9XETzw7CMsT
Clears CommentChecker findings in src/ (3,280 -> 209, the remainder being false
positives like PLC-5/IEEE-754/M0.0) by adding missing summaries/params/returns,
normalising inheritdoc usage, and removing Gitea/review tracking IDs while keeping
the rationale they annotated. Comment-only: comment-stripped sources are identical
to the parent commit.
Item 1: IHistorianDataSource.MaxRawValuesPerRead (Gateway: learned ceiling - 16 = L; 0 elsewhere, guard-tested).
RawPageLimit plans every raw page on top of #692's lookahead: with L > 0 the read (page P + boundary ties k
+ lookahead) is <= L, P = min(N, L - k - 1) (uncapped: L - k - 1); no room => straight to the tie-cluster
over-fetch (never an uncapped or underflowing request). One re-plan + re-read when the read taught a new
limit or was refused for crowding pre-window rows (HistoryReadLimitExceededException.PreWindowRows): the
page shrinks by them. Over-fetch bound min(MaxTieClusterOverfetch, L - 1); slice size never 0.
Review fixes: F1 a window starting at/before the epoch counts AVEVA's synthetic row as pre-window (a
ceiling-truncated read was reported complete); F2 the page path disables ReverseRawReader's own re-run
(cold end-only ceiling 20/N=3000 cost 3,023 reads, now <= 40); F3 crowded look-back re-read around, not
refused; F4 the #687 crowding re-read room at least doubles (up to 8 re-reads), so a cluster of hundreds
just before a resume point no longer fails on a default gateway; a crowding refusal that leaves no room
is BadTooManyOperations, never a tick-by-tick cursor.
Item 2: ServerHistorian:EventReadHorizon (default 00:00:00 = exact, unchanged). When set, every fresh
HistoryReadEvents window's earlier bound is raised to now - horizon (both directions, all backends).
Lossy by design; documented.
Item 3 (native TimeAverage/Total re-check) stays blocked on historiangw#27.
Review follow-up: on the Gateway every value is a Double (AVEVA stores a Boolean
as a 0/1 Int2), so the raw-evaluated AtTime interpolated a Boolean node to 0.5.
- IHistorianDataSource gains a default-interface overload
ReadAtTimeAsync(fullReference, timestamps, TypeCode? valueType, ct) that
forwards to the existing one (SqlServer/QuestDB/Null/fakes unchanged).
- OtOpcUaNodeManager.HistoryReadAtTime passes the node's scalar DataType
(AtTimeValueType: built-in type -> TypeCode; arrays/other types => null);
Raw and UNS NodeIds alike.
- GatewayAtTimeReader converts each raw row to the hinted kind BEFORE the shared
AtTimeEvaluator runs (Boolean = value != 0 => stepped; integers => Int64 =>
interpolated, rounded half away from zero, returned as the node's integer
type; floats Double), so the evaluator's own type branch decides.
- AtTimeEvaluator boxed every interpolated Int64 as a Double (`cond ? (long)x :
v` widens to double); its "keeping its type" test passed because Shouldly
ShouldBe compares numbers across types. Fixed (affects SqlServer/QuestDB too)
and pinned with ShouldBeOfType.
A resumed raw page asked the backend for only N rows from the boundary timestamp
(inclusive), then trimmed the boundary ties already emitted: it netted N - skip values,
and at N = 1 nothing — the empty "full" page was taken for a stalled tie cluster and a
MaxTieClusterOverfetch + 1 (65,537-row) over-fetch stepped one tick, returning an EMPTY
page with a continuation point between every value (8 values = 17 pages / 25 reads),
forward and reverse, with or without ReturnBounds, on every backend.
Each page's read now asks for N + boundarySkip + 1 rows: the ties it trims, the page and
one lookahead row. The lookahead row is the 'more data' signal, so an exact multiple ends
on its last full page (no trailing empty page). The over-fetch fires only when every row
past the trimmed ties is still on the boundary (a genuine cluster larger than the page);
a cursor left inside a cluster is flagged WithinTieCluster and over-fetches directly.
A page that never leaves the boundary adds the prior skip to its cursor.
Low items: BoundedReadHasAnythingAsync carries its walk hint and, when there is no data,
the end bound it found (HistoryEndBound.Resolved + DataExhausted), so the next page reads
nothing; HistoryBounds.IsPlaceholder is an explicit marker (ConditionalWeakTable over the
NotFound instances) instead of status+null shape, so a stored Bad_BoundNotFound row is data.
Tests: NodeManagerHistoryReadPageFillTests (N=1 every shape/direction/bounds, tie clusters
straddling boundaries at N=1/2/3, exact-multiple, carried end bound + walk hint, stored
placeholder-shaped row). Existing paging tests updated where they encoded the short pages.
1. The at-or-after bound read on a forward-only backend (Gateway) ends at
now + ReverseRawReader.LookAhead instead of DateTime.MaxValue (the gateway
only checks start <= end, so a year-9999 end reached AVEVA); a bound beyond
the horizon is not found without a read. SqlServer/QuestDB keep MaxValue:
they bind it safely and may hold samples further ahead. The Gateway fake now
refuses far-future ends, so the missing-end-bound test is no longer vacuous.
3. No data and no bound found (whole read empty) => GoodNoData, no values —
the pre-bounds answer (6.5.3.2: success only if one or both bounds exist).
A one-value page whose start bound is missing first checks there is data or
a found end bound.
4. ServerHistorian:HonorReturnBounds (default true); false ignores ReturnBounds
as before #691, including the modified-read Bad_InvalidArgument.
The node manager composes the start/end bounds from each backend's existing raw
reads (one authority, HistoryBounds): at-or-before = a capped reverse read
(native, or ReverseRawReader's walk-back on a forward-only backend — never
AVEVA's synthetic boundary row), at-or-after = a capped forward read. Bounds
count toward NumValuesPerNode, the start bound leads the first page, the end
bound ends the last (carried in the continuation point). Missing bound =
Bad_BoundNotFound (null, at the bound time; one-sided reads ±1 s from the
previous value, Table 1 footnotes a/b). A modified read with ReturnBounds is
Bad_InvalidArgument (Part 11 6.5.3.3).
The .NET SDK's ReadRawModifiedDetails defaults ReturnBounds to TRUE; the
existing tests built details without setting it and now set it false.
Oracle: every row of Part 11 Table 1 over three backend shapes, plus paging
concatenation, ties, Bad bounds, microsecond truncation; conformance pins the
lookup primitives on SqlServer + QuestDB.
The null source has no history in either direction; reporting false
made the server walk an empty reverse events read back through three
empty forward reads. It now answers the reverse overload with the empty
result itself (guard test unchanged: it still declares both members).
GatewayHistorianDataSource.ReadEventsAsync sized its result list to
maxEvents, which is int.MaxValue for NumValuesPerNode = 0: every
uncapped Gateway events read (forward on master, and the new walked
reverse one) threw 'Array dimensions exceeded' and counted as a backend
failure. Capacity is bounded at 1024. The events walk delegate moved to
ReverseEventsReader so it is tested over the real Gateway source
(forward uncapped, reverse uncapped, reverse capped).
A reverse or end-only capped events read on a backend without
SupportsReverseEvents (Gateway, Null) was refused
BadHistoryOperationUnsupported (explicit reverse) or answered with the
OLDEST N ascending (end-only, #675). It is now served newest-first by
the same ReverseWalk as raw reads: page-sized ms-aligned segments,
never answered from a read the source flagged truncated, ties sorted by
EventId (the gateway orders by event time only - the fake shuffles
them per call), one extra event walked to signal 'more', uncapped = one
forward read reversed, and the width + proven-empty stretch carried in
the events cursor. The oversized-cluster over-fetch keeps exactly the
events at T in the same order. A tie cluster over the budget is
BadTooManyOperations. Docs note the gateway's EventReadMaxRows must be
unlimited (it truncates silently).
The last pages of a deep reverse page-through on a forward-only backend
each walked down to 1970 one x4 growth step at a time (~14-16 reads,
~2.5 s live). After two empty segments the walk now asks once per page
for the whole remainder at the page budget (a truncated answer is
discarded and the walk carries on), and the stretch the page's last
complete read proved empty rides the continuation point
(HistoryContinuationState.EmptyFromTicks/EmptyToTicks, session-held, so
no versioning) so the next page steps over it. Fuzz now pages with the
walk's own hints and with true random empty stretches.
ReverseRawReader aimed every segment at half of MaxTieClusterOverfetch
(~32k rows by default) and carried that width page to page, so a paged
'latest N' read on a dense Gateway tag fetched ~32,770 rows per page
(2-5 s live) to return N. The walk now lives in a generic ReverseWalk
core: segments are aimed at ~N+8 rows (page budget 2N+16), a discovery
segment (first without a hint / after an empty one) may read 1,024, and
the tie budget is only the ceiling a single-timestamp cluster escalates
to. A truncated read never re-enters the stretch below its newest row
until the gap above it is bisected. Tests: per-page row counts on a
dense tag (node manager + walk), randomized exactness fuzz (walk and
node-manager paging), dense-tag-below-a-long-gap read bound.
1. Uncapped reverse raw read on a forward-only backend = ONE forward read of the
window, filtered and reversed in memory (was a segment-by-segment walk).
2. Segment width is aimed at ~half the row budget from the density just observed
(overflow: from the truncated read's own sample span) and carried page to page
in HistoryContinuationState.SegmentWidthTicks.
3. The walk starts no later than now + 1 day and never reads before the epoch.
4. Request bounds are rounded outward to the millisecond, so a row AVEVA
fabricates at a rounded-up query start cannot land inside the segment.
5. Budget M = max(1, MaxTieClusterOverfetch); reads ask M + 2 rows, completeness is
'short OR last row past the segment', and a read crowded by rows before the
segment is re-read once (<= 2M + 4). A cluster of exactly M, neighbouring
clusters each within M, and M <= 1 are all served; only one timestamp over M
is refused. ServerHistorianOptions text updated.
6. The raw and events tie-path oversized-cluster refusal is BadTooManyOperations
(was BadHistoryOperationUnsupported), consistent with the walk.
7. GatewayHistorianDataSource.ReadRawAsync: a caller cancellation is not a backend
failure; NumValuesPerNode = 0 is sent as int.MaxValue (the client package and
the gateway reject max_values <= 0, so every uncapped Gateway raw read failed);
a MaxValuesCeiling refusal is a HistoryReadLimitExceededException.
8. Tests: upper-edge filter, epoch floor, look-ahead, ms alignment, exact/adjacent
clusters, minimal budget, carried density, and the walk over the real Gateway
source + FakeHistorianGatewayClient (OpcUaServer internals visible to it).