- AlarmTransitionKind.ActiveAcknowledged (appended): active AND acked applied as ONE projection.
Galaxy ActiveAcked snapshot entries and OpcUaClient inactive->(active,acked) use it; the
projector writes 'Activated' only if not already active, 'Acknowledged' only if not acked.
- AlarmEventArgs.IsRestatement (optional, default false): set only by Galaxy snapshot entries
and OpcUaClient first sight. A flagged Retrigger on an Active+unacked condition with the same
message and severity, or a flagged Clear on an inactive condition, writes no /alerts row.
- NativeAlarmProjector reports the history rows per transition; ForwardNativeAlarm writes one
row per entry. Unflagged sources (FOCAS/MTConnect/AbCip, live Galaxy) are unchanged.
- Tests: projector rules each with a must-write control; OpcUaClient transition table;
Galaxy feed/driver mapping; Galaxy + OpcUaClient end-to-end through DriverHostActor.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
The tests probe a free port (bind 0, release) and start the SDK server later; under a
highly parallel run another test can take the port in between and the SDK fails with
'Failed to establish tcp listener sockets for Ipv4 and IPv6.'. OpcUaHostStart.StartAsync
builds a fresh host + server on a fresh port per attempt (up to 5) when the failure is a
bind failure; all 45 start sites in OpcUaServer.Tests, OpcUaServer.IntegrationTests and
Runtime.Tests use it. Per-attempt GUID ApplicationUris are hoisted out of the host factory
because a changed URI against a reused PKI store fails with 'Cannot access private key'.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
An ALARM: address (*, <Type>, <Type>/<n>, <Type>/<lo>-<hi>, T<code>, OTHER) on a raw tag that
also carries the cross-driver alarm object is ONE condition with ConditionId == RawPath and a
Kind (Raise / Retrigger / Clear), so DriverHostActor.ForwardNativeAlarm routes it and
NativeAlarmProjector activates it. Fixes all seven triage defects:
1. SubscribeAlarmsAsync treated the host's RawPaths as device hosts -> nothing polled.
2. Decorated "{host}#{Type}:{Number}" ConditionId -> every event dropped.
3. No Kind -> projector kept prior state.
4. WireFocasClient.ReadAlarmsAsync answered [] on failure -> mass clear + un-acked re-raise.
It now throws; a failed device read keeps every condition's state.
5. Acks lost on reconnect -> told-record dedup (MTConnect #626 pattern) held for the driver's
lifetime; same-set re-subscribe / re-init re-raise nothing; changed set prunes leavers only.
6. Subscribe threw while AlarmProjection.Enabled=false -> the tag is the opt-in; flag is a no-op.
7. Alarm tags could not be authored -> ALARM: grammar (FocasAlarmSelector, Contracts) backs the
editor, the address picker, the deploy-time inspector and driver init.
Severity: authored alarm.severity -> exact OpcUaSeverity; else the 16i-era type bucket. The type
table stays the only one (moved to Contracts, documented 16i-era; 30i codes not invented; raw
T<code> selector + raw code in every message). Read-only: ack is server-side. Also clears the
value table on a re-initialise (#630 gap that let a removed/moved tag keep reading).
E2E: Runtime.Tests FocasNativeAlarmEndToEndTests drives the real driver through the real
DriverHostActor and asserts the condition goes Active then inactive.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
Adds the Calculation pseudo-driver (tags computed by C# scripts over other tags' live
values) plus the host seam that feeds it:
- IDependencyConsumer capability interface (Core.Abstractions) + DriverTypeNames.Calculation.
- CalculationDriver : IDriver, ISubscribable, IReadable, IDependencyConsumer — change-gate +
dedupe (VirtualTagActor parity), timer-group scheduler, Bad-transition + script-log emission,
Good recovery; reuses the T0-4 CalculationEvaluator.
- DriverHostActor spawns a DependencyConsumerMuxAdapter per dependency-consuming driver,
registering its refs on the per-node DependencyMuxActor and forwarding DependencyValueChanged
→ OnDependencyValue; re-registers on every apply, torn down with the driver.
- Factory + probe registered in DriverFactoryBootstrap (keeps the T0-3 guard green); guard test
csproj references the driver so the bin-scan discovers the factory.
- DeploymentArtifact injects the resolved scriptSource (scriptId → SourceCode) into a calc tag's
delivered TagConfig so the host-blind driver can compile it.
- DraftValidator deploy gates: CalculationScriptMissing / CalculationScriptNotFound (scriptId
existence) + CalculationDependencyCycle (DependencyGraph.DetectCycles over calc→calc edges).
- Tests: driver units (dep-ref extraction, change-gate, dedupe, Bad+script-log+recovery, timer,
read), tag-config parsing, DraftValidator gates (self/2-cycle/cross-driver-terminal), and a
Runtime integration test proving values FLOW mux → adapter → driver → calc-of-calc end-to-end.
Claude-Session: https://claude.ai/code/session_01LVneM3eh1UtJxEisFXgmox
The pass-through NullDriverCapabilityInvoker returns the call-site task directly, so it
never exercises the real invoker's internal `pipeline.ExecuteAsync(...).ConfigureAwait(false)`.
Adds a test-only Core reference to Runtime.Tests (the PRODUCTION Runtime assembly stays
Polly-free via the seam) and a discovery test that drives DriverInstanceActor through a real
CapabilityInvoker over a genuinely-yielding ITagDiscovery driver — proving the invoker's
internal ConfigureAwait(false) does NOT leak to the actor's own await, so the post-await
Context.Parent.Tell still runs (DiscoveredNodesReady arrives). Runtime.Tests 358, Core.Tests 238.
All five suppressed advisories are now resolved at baseline/resolved versions,
so every NuGetAuditSuppress is removed repo-wide:
- System.Security.Cryptography.Xml (GHSA-37gx-xxp4-5rgx / GHSA-w3x6-4m5h-cxqf)
-> fixed by the .NET 10 baseline (10.0.6)
- OPCFoundation Opc.Ua.Core (GHSA-h958-fxgg-g7w3) -> fixed at resolved 1.5.378.106
Two were still live and are now patched via direct security pins:
- OpenTelemetry.Api 1.9.0 -> 1.15.3 (GHSA-g94r-2vxg-569j) pinned in Cluster;
Runtime/ControlPlane/AdminUI + tests inherit via project reference
- Tmds.DBus.Protocol 0.20.0 -> 0.21.3 (GHSA-xrw6-gwf8-vvr9) pinned in Client.UI
Also correct the Historian sidecar runtime comments (x86 -> x64, matching the
csproj PlatformTarget). Solution audit: 0 vulnerable packages; full build clean.
Joseph Doherty