1. Wiped-node back-fill (live gate check 4). Fixed upstream in
ZB.MOM.WW.LocalDb 0.1.2 and pinned here. The gate's diagnosis was slightly
off: the oplog cap was not the gate. Snapshot detection measured the peer's
gap against the oldest surviving oplog row and read an empty oplog as "no
gap possible" — and an empty oplog is the steady state of a converged pair,
since ack-pruning deletes everything the peer confirmed. The healthy state
was the one state that could not heal a wiped peer. Now measured against
last_acked_seq when the oplog is empty.
Pinned at this level too, not just the library's: the pair harness grows a
WipePassiveAsync (a NEW database — a rebuilt node comes back with a new node
id and a zero watermark), and the new scenario asserts the emptied oplog as
its precondition before wiping, then requires the deployment artifact to
come back byte-identical with no new deploy. Verified RED against the pinned
0.1.1 (times out waiting for back-fill) and green on 0.1.2.
2. Oplog growth on default-OFF nodes (live gate check 8), fixed at the source:
StoreAsync now skips entirely when the pointer already names this
deployment/revision, the SHA matches the bytes, and the expected chunk count
is present. Re-caching an artifact the node already holds — every restart's
boot-from-cache, every RestoreApplied — writes nothing and mints no oplog
rows, where before it cost a delete plus an insert per chunk plus a pointer
update, all identical to what was already there.
Identity is over the bytes and the chunks are counted, both deliberately: a
re-composed artifact can carry the same ids with different bytes, and a
pointer can name a deployment whose chunks are missing, where skipping would
make an unreadable cache permanent. Both guards verified RED against a naive
pointer-only skip.
The gate's stated bound was also wrong and is corrected in the doc: growth
was never headed for the 1M row cap. AddZbLocalDbReplication is registered
unconditionally, so MaintenanceBackgroundService runs on default-OFF nodes
and the 7-day MaxOplogAge cap prunes.
Runtime.Tests 412/0/31, Host.IntegrationTests LocalDb 45/45. Pre-existing and
unrelated: AbCip_Green_AgainstSim (needs the AB CIP docker fixture, red on a
clean master too) and a flaky Roslyn race test (green 2/2 in isolation).
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
CacheAppliedArtifact ran only on a fresh apply (ApplyAndAck), never on the
bootstrap RestoreApplied path. So a node whose cache was lost — fresh/wiped
volume, disk failure — recovered its served state from central yet stayed
cache-less, unable to boot-from-cache on the NEXT central outage until some
future new deploy happened to land. Replication does not heal this: a peer's
already-acked cache rows are pruned from its oplog, so a fully-wiped, converged
node is never back-filled. RestoreApplied now writes the served artifact back to
the cache (invariant: the cache holds what the node serves). Found on the
docker-dev live gate wiping a node's LocalDb volume.
Boot-from-cache told OpcUaPublishActor to RebuildAddressSpace(deploymentId), which
re-loads the artifact from the ConfigDb by id — the very database that is
unreachable during the outage this path exists to survive. The rebuild no-op'd, so
a cache-booted node ran its drivers but served OPC UA clients an EMPTY address
space. RebuildAddressSpace now carries an optional in-hand Artifact blob;
ApplyCachedArtifact passes the cached bytes so materialisation happens from them
directly. Found on the docker-dev live gate: healthy peer served 16 nodes, the
cache-booted node served 1.
Hooks the Bootstrap catch that previously went straight to Stale. On a cache hit the
node serves its last-known-good configuration through the outage instead of coming
up with an empty address space; on a miss, behaviour is byte-for-byte what it was.
The read is unkeyed because ClusterId is only derivable from an artifact you already
hold or from the unreachable central DB (recon D-1). Newest pointer wins, which is
correct in every real topology - a node belongs to one cluster and its peer
replicates that same row.
Splits PushDesiredSubscriptionsFromArtifact out of PushDesiredSubscriptions: the
cache path runs precisely when the ConfigDb read cannot succeed, so re-reading the
artifact there would fail by definition.
RunningFromCache is surfaced on NodeDiagnosticsSnapshot (optional param, existing
call sites unaffected). A node running from cache looks entirely healthy from
outside - full address space, live values - but its config is frozen and no deploy
can reach it. It clears only on a real apply from central.
New Props/ctor parameter appended LAST at all three positions - the forwarding
list inside Props.Create is positional and compiles into an expression tree, so a
mis-ordered argument is usually type-compatible and binds the wrong dependency at
runtime. All 26 existing test construction sites use named arguments and needed no
change.
ReconcileDrivers now returns the blob it loaded. It catches its own DB failures and
returns without rethrowing, so ApplyAndAck can reach its success path having spawned
zero drivers; caching on 'the apply succeeded' would persist an empty artifact as
last-known-good and boot the node into an empty address space during the next
outage. Verified: weakening the guard to null-only turns EmptyArtifact_IsNotCached
red.
The store runs in its own try/catch because an Applied ACK has already been sent by
then - an escaping exception would land in ApplyAndAck's catch and emit a second,
contradictory Failed ACK for a deployment the fleet believes is live.
128 KiB raw chunks base64-encoded into deployment_artifacts, with a per-cluster
pointer carrying a SHA-256 over the raw bytes. Reassembly verifies chunk count
AND the SHA before returning, so a partially replicated artifact reads back as a
clean miss rather than a silently truncated address space.
Adds GetCurrentUnkeyedAsync beyond the plan's interface: at the boot-failure seam
the actor cannot know its ClusterId (it is derivable only from an artifact you
already have, or from the central DB that is unreachable). Recon D-1.
The prune's 'deployment_id <> @DeploymentId' clause makes 'the pointer's target is
always present' structural rather than a side effect of clock resolution. Three
stores inside one timestamp tick fall through to a deployment_id tiebreak, and
since real ids are GUIDs that ordering is random - the row just written could lose,
leaving the pointer naming chunks that no longer exist. Verified red without the
clause.
Layer 3 of #477: a scripted alarm's condition Quality now reflects the WORST
quality across its input tags, mirroring the native OT semantic (#477 L2).
Plumbing (quality was silently discarded twice on the live path):
- VirtualTagActor.DependencyValueChanged gains Quality (defaulted Good); the
DependencyMuxActor forwards the published AttributeValuePublished.Quality it
already carried; ScriptedAlarmHostActor.OnDependencyChanged pushes the real
quality into the engine (was hardcoded 0u/Good).
Engine (Core.ScriptedAlarms):
- ScriptedAlarmEngine computes worst-of-input quality each eval (skipping
not-yet-published inputs, which are a readiness concern, not a quality signal)
and carries it on ScriptedAlarmEvent.WorstInputStatusCode.
- A real transition carries the current worst quality so ToSnapshot's full
snapshot doesn't clobber quality back to Good (e.g. transition while Uncertain).
- A Bad input freezes the condition (no transition), like a comms-lost native
driver; a quality-bucket change with no transition emits the new
EmissionKind.QualityChanged, routed to the existing #477-L2
AlarmQualityUpdate -> WriteAlarmQuality node path (quality only, no /alerts
row, no historian write). ScriptedAlarmSource skips QualityChanged so it never
fabricates a phantom IAlarmSource event.
Host: ToSnapshot maps WorstInputStatusCode -> OpcUaQuality; OnEngineEmission
routes QualityChanged out of band.
Tests (TDD, RED-first): engine worst-carry + Bad/restore QualityChanged +
unchanged-bucket-no-emit; source swallows QualityChanged; mux forwards quality;
host Bad-dep -> AlarmQualityUpdate(no alerts) + transition snapshot carries worst.
Docs: AlarmTracking.md Layer-3 section + design doc.
Closes#478
Part 9 ConditionType.Quality was never assigned; default(StatusCode)==Good
so every native + scripted condition reported Good unconditionally — a
comms-lost device still showed a healthy, inactive, Good condition (a
wrong-VALUE bug, distinct from the null-value #473/#475). Clients (and HMIs
bucketing on IsGood) could not tell "genuinely inactive" from "lost contact".
Layer 1 — make Quality a real, plumbed field:
- AlarmConditionSnapshot gains OpcUaQuality Quality (default Good).
- MaterialiseAlarmCondition sets it (native BadWaitingForInitialData, scripted Good).
- WriteAlarmCondition projects snapshot.Quality; the delta-gate gains a Quality
member so a quality-bucket change fires a Part 9 event.
Layer 2 — drive native quality from driver connectivity (a comms-lost driver
emits no alarm transitions, and an alarm-bearing raw tag has no value variable,
so quality can't come from either existing channel):
- DriverInstanceActor Tells parent ConnectivityChanged on Connected/Reconnecting.
- DriverHostActor fans it to every native condition the driver owns as
OpcUaPublishActor.AlarmQualityUpdate (Good on connect, Bad on disconnect).
- New dedicated IOpcUaAddressSpaceSink.WriteAlarmQuality sets ONLY Quality and
fires only on a bucket change — never touches Active/Acked/Retain (an active
alarm that loses comms stays active). Not a full-snapshot re-projection, so it
can't clobber severity/message and works for a never-fired condition.
Forwarded through DeferredAddressSpaceSink (F10b trap; auto-verified by the
reflection forwarding guard). Ungated by redundancy role; no /alerts row.
Scripted conditions stay Good; worst-of-input quality deferred to #478 (Layer 3).
Tests: node-level (materialise/project/no-clobber/unknown-node no-op),
NativeAlarmProjector, DriverInstanceActor connectivity emission, DriverHostActor
fan-out, OpcUaPublishActor routing, and the wire-level guard
(Condition_event_Quality_tracks_source_connectivity_on_the_wire) — RED-verified
against a simulated pre-fix always-Good server. Existing DriverInstanceActor
parent probes ignore the new ConnectivityChanged.
Docs: docs/AlarmTracking.md §"Condition source-data Quality (#477)";
design doc docs/plans/2026-07-17-alarm-condition-quality-477-design.md.
M1 (MEDIUM): the VirtualTag re-assert re-published a stale last value with a
fresh deploy-time timestamp, and VirtualTagHostActor.OnResult recorded it to
the IHistoryWriter for Historize=true plans — every deploy would append an
artificial historian sample (BadInternalError if the last state was Bad) that
never corresponded to a real evaluation. Inert today (NullHistoryWriter) but a
data-quality bug once a VT history sink binds. Fix: EvaluationResult carries an
IsReassert flag (default false), set true in VirtualTagActor.OnReassertValue;
OnResult still PUBLISHES the AttributeValueUpdate (to repair the reset node) but
SKIPS _history.Record when IsReassert. Regression test
VirtualTagHostActorTests.Reassert_of_a_historized_vtag_publishes_but_does_not_re_record_to_the_historian
(fails before — count=2 — passes after: count stays 1).
LOW-3: corrected the ordering comments in VirtualTagActor.OnReassertValue and
VirtualTagHostActor.OnApply. ApplyVirtualTags goes to the VirtualTag HOST, not
the publish actor; the ordering holds because the re-assert reaches the publish
actor via a multi-hop chain (host -> child ReassertValue -> child -> parent
EvaluationResult -> OnResult -> publish actor) and thus lands AFTER
RebuildAddressSpace in the shared publish actor's FIFO mailbox.
M2 (CONFIRMED REAL — reported as scoped follow-up, not fixed here): the same
redeploy-reset race is latent for Part 9 scripted-alarm condition nodes. A
full-rebuild deploy clears + re-materialises them fresh
(OtOpcUaNodeManager.RebuildAddressSpace clears _alarmConditions @2160;
MaterialiseAlarmCondition recreates normal state), but the engine reload does
NOT re-emit an unchanged-active condition: ScriptedAlarmEngine.LoadAsync ->
EvaluatePredicateToStateAsync (@546-552) computes ApplyPredicate(seed, true)
where seed is the persisted state from the DB-backed EfAlarmConditionStateStore,
yielding EmissionKind.None, which ScriptedAlarmHostActor.OnEngineEmission (@292)
filters. Net: an active alarm with static dependencies under-reports until its
next real transition on a full-rebuild deploy. The fix is larger/riskier than
the VT case (touches the Core engine emission contract and must publish ONLY the
OPC UA node state, NOT the alerts topic, to avoid duplicate AVEVA history rows —
the alarm analogue of M1), so per review guidance it is deferred as a scoped
follow-up rather than forced into this commit.
Claude-Session: https://claude.ai/code/session_01LVneM3eh1UtJxEisFXgmox
Equipment VirtualTags published Bad at runtime whenever their dependency
value was static. Root cause: a deploy re-materialises each VirtualTag's
UNS node to BadWaitingForInitialData (OpcUaPublishActor.HandleRebuild), but
a surviving unchanged-plan VirtualTagActor keeps its value-dedup state, so
its unchanged recompute is suppressed (VirtualTagActor.OnDependencyChanged
value dedup) and the freshly-reset node stays Bad forever. Only masked when
the dependency value changes every poll.
Fix: VirtualTagHostActor tells each surviving (not just-spawned) child to
ReassertValue on every apply; the child re-emits its last value/quality,
bypassing dedup. Ordering is safe — DriverHostActor enqueues the
RebuildAddressSpace (materialise) to the single-threaded publish actor
before the ApplyVirtualTags that triggers the re-assert, so the re-publish
lands on the freshly-materialised node.
Regression test: VirtualTagHostActorTests
.Unchanged_redeploy_reasserts_last_value_so_a_reset_uns_node_recovers
(fails before, passes after). Live-verified on docker-dev: GateVt reads
Good via both the absolute and the {{equip}}/MainPressure script forms.
Claude-Session: https://claude.ai/code/session_01LVneM3eh1UtJxEisFXgmox
Materialize each native alarm ONCE at the raw tag (ConditionId = RawPath, Raw
realm); wire the single condition as an SDK event notifier of each referencing
equipment's UNS folder so one ReportEvent fans to every root without
re-reporting per root (which would break Server-object dedup + Part 9 ack
correlation).
- New sink method WireAlarmNotifiers(alarmNodeId, alarmRealm,
notifierFolderNodeIds, notifierFolderRealm) on IOpcUaAddressSpaceSink,
forwarded through DeferredAddressSpaceSink + SdkAddressSpaceSink +
NullOpcUaAddressSpaceSink (the forwarding-trap guard); auto-covered by the
DeferredSinkForwardingReflectionTests realm + forwarding guards + a
hand-written forward test.
- OtOpcUaNodeManager: the normative AddNotifier(isInverse) pair + idempotent
EnsureFolderIsEventNotifier per equipment folder; tracked per condition in
_alarmNotifierWiring. Teardown symmetry: RemoveNotifier(bidirectional:true) on
RebuildAddressSpace, RemoveAlarmConditionNode, and RemoveEquipmentSubtree so no
inverse-notifier entry leaks across redeploys.
- AddressSpaceApplier.MaterialiseRawSubtree wires notifiers for each native alarm
tag, resolving its ReferencingEquipmentPaths (Area/Line/Equipment) to the
EquipmentId folder NodeIds via BuildEquipmentIdByFolderPath.
- AlarmTransitionEvent gains ReferencingEquipmentPaths (empty default); /alerts
renders the referencing-equipment list as display metadata.
- Un-skipped + rewrote the native-alarm dark tests
(DriverHostActorNativeAlarmTests x6, DriverHostActorNativeAlarmAckRoutingTests
x1) for the v3 raw-condition model; new NodeManagerMultiNotifierAlarmTests
proves multi-notifier wiring + teardown symmetry (no leaked duplicates after a
re-trip) + applier wiring test.
Claude-Session: https://claude.ai/code/session_01LVneM3eh1UtJxEisFXgmox
H1 (HIGH): write-routing key now (AddressSpaceRealm, bareId), not bare-only.
A raw s=<RawPath> and a UNS s=<Area/Line/Equip/Eff> can collide as bare
strings; the bare-only key let a colliding raw+UNS pair route to the WRONG
driver ref (last-writer-wins). The realm the node manager resolves (RealmOf)
is now threaded through IOpcUaNodeWriteGateway.WriteAsync -> RouteNodeWrite ->
_driverRefByNodeId keyed by (realm, bareId). New regression test:
Colliding_raw_and_uns_bare_ids_route_to_their_own_driver_by_realm.
M1 (MEDIUM): discovered-node injection made coherently DORMANT. HandleDiscoveredNodes
hard-short-circuits (single enforcement point; _discoveredByDriver never
populates so the re-inject tail is inert too), with a clear log pointing at the
/raw browse-commit flow. New pin: Discovered_nodes_are_ignored_dormant_in_v3;
the 16+2 v2 injection scenarios re-pointed to an accurate skip reason
(DiscoveryInjectionDormantV3).
M2 (MEDIUM): realm-qualified dual-node self-correction tests —
Failed_uns_write_reverts_uns_node_and_leaves_raw_node_untouched +
Raw_realm_revert_reverts_raw_node_only (the second fails if the realm is dropped).
L1: removed the = AddressSpaceRealm.Uns defaults from the consequential
node-manager mutation methods (WriteValue/WriteAlarmCondition/MaterialiseAlarmCondition/
EnsureFolder/EnsureVariable/UpdateFolderDisplayName/UpdateTagAttributes/
RaiseNodesAddedModelChange/Remove*/RevertOptimisticWriteIfNeeded) + the
AttributeValueUpdate/AlarmStateUpdate records, so the compiler forces explicit
realm; read-only accessors + internal builders retain their defaults.
L3: fixed the stale VirtualTagHostActor class comment (V3NodeIds.Uns, not the
retired EquipmentNodeIds.Variable).
Also: DeploymentArtifactRawUnsParityTests — Raw/UNS node-set byte-parity
round-trip between AddressSpaceComposer.Compose and DeploymentArtifact.ParseComposition.
Claude-Session: https://claude.ai/code/session_01LVneM3eh1UtJxEisFXgmox
Wave B of Batch 4 — the runtime binding seam for the dual namespace.
Applier (both realms, explicit realm at every sink call site):
- MaterialiseRawSubtree: Raw containers as folders + Raw tags as variables
keyed by RawPath (native-alarm tag → single Part 9 condition at the RawPath),
all in AddressSpaceRealm.Raw; historian tagname = override else RawPath.
- MaterialiseUnsReferences: each UNS reference Variable under its equipment
folder (Uns realm) + an Organizes UNS->Raw edge; inherits writable/array/
historian tagname from the backing raw tag (both NodeIds -> one tagname).
- FeedHistorizedRefs / ProvisionHistorizedTags now source RAW tags (mux ref
stays single, keyed by RawPath); ApplyPureRemove tears down raw tags + UNS
refs in place (raw-container removal falls back to rebuild).
DriverHostActor (dual-NodeId, single-source fan-out):
- _nodeIdByDriverRef value gains a realm (NodeRealmRef); rebuilt from
RawTags UNION UnsReferenceVariables so one (DriverInstanceId, RawPath) fans
to the raw NodeId AND every referencing UNS NodeId with identical
value/quality/timestamp. Write inverse map keyed by the bare id; the
ns-qualified NodeId the write hook passes is normalised (BareNodeId) so a
write to either NodeId resolves the same driver ref (-> RawPath write).
- Native raw alarm condition routing is realm-tagged (Raw); AttributeValueUpdate
+ AlarmStateUpdate carry the realm through to the sink.
Retire EquipmentNodeIds -> V3NodeIds.Uns (applier/VirtualTagHostActor) and
RawPaths.Combine (DiscoveredNodeMapper, discovered nodes are Raw now).
DeploymentArtifact.ParseComposition emits the Raw + UNS subtrees byte-parity
with the composer (reconstruct entities -> AddressSpaceComposer.Compose).
Sink surface: removed the transitional `= AddressSpaceRealm.Uns` defaults from
IOpcUaAddressSpaceSink / ISurgicalAddressSpaceSink / SdkAddressSpaceSink /
DeferredAddressSpaceSink / NullOpcUaAddressSpaceSink — every call site is now
explicit (realm reordered before the trailing optionals on EnsureVariable +
MaterialiseAlarmCondition). Node-manager convenience methods keep their
defaults (they are not the interface impl; Sdk delegates explicitly).
Tests: rewrote DriverHostActorLiveValueTests (fan-out drift, 1:N) +
DriverHostActorWriteRoutingTests (dual-NodeId raw/uns write routing) to the v3
raw+uns model; new AddressSpaceApplierRawUnsTests; migrated the EquipmentTags
provisioning/feed tests to RawTags; swept EquipmentNodeIds test callers.
Claude-Session: https://claude.ai/code/session_01LVneM3eh1UtJxEisFXgmox
Close the Wave-A M1 gap: the sink surface had no way to wire the mandated
cross-tree Organizes reference from each UNS reference Variable to its backing
Raw node, forcing WP3 to reopen the frozen surface. Add a dedicated
realm-qualified AddReference method instead.
- IOpcUaAddressSpaceSink.AddReference(sourceNodeId, sourceRealm, targetNodeId,
targetRealm, referenceType="Organizes"): realm-qualified both ends; idempotent;
a missing endpoint is a logged no-op (never throws) so a mid-rebuild race can't
fault a deploy. Base-interface capability (no surgical sniff, no transitional
default — WP3 wires it explicitly per UNS reference variable).
- SdkAddressSpaceSink forwards to the node manager; DeferredAddressSpaceSink
forwards unconditionally (like EnsureFolder); NullOpcUaAddressSpaceSink no-ops.
- OtOpcUaNodeManager.AddReference: resolve both nodes by full ns-qualified key
(variable/folder/condition via ResolveNodeState), guard both-exist, then wire
the edge bidirectionally (forward Organizes on source, inverse on target) with a
ReferenceExists idempotency guard + ClearChangeMasks on mutated sides. Reference
type resolved by ResolveReferenceType (Organizes default). Added internal
GetNodeReferences test/diagnostic accessor.
- Reflection guard: the exhaustive-forwarding test + the realm-discriminator guard
auto-cover AddReference (it has two AddressSpaceRealm params) — no edit needed.
- New SdkAddressSpaceSinkTests: Organizes UNS→Raw edge created bidirectionally +
idempotent; missing endpoint is a safe no-op.
- All 15 IOpcUaAddressSpaceSink test doubles gain the AddReference no-op so the
solution still builds.
Build: dotnet build ZB.MOM.WW.OtOpcUa.slnx = 0 errors.
Tests: Commons.Tests 310/310; OpcUaServer.Tests 337 passed / 4 pre-existing skips.
Claude-Session: https://claude.ai/code/session_01LVneM3eh1UtJxEisFXgmox
Register both v3 namespaces (Raw first, UNS second) on OtOpcUaNodeManager and
thread an AddressSpaceRealm discriminator through every node-naming sink method
so a bare node id is resolved to the correct namespace by realm — never parsed
out of the id string.
- IOpcUaAddressSpaceSink / ISurgicalAddressSpaceSink: every node-naming method
gains `AddressSpaceRealm realm = AddressSpaceRealm.Uns` (transitional default so
un-migrated WP3 call sites still compile; WP3/Wave B makes them explicit and
removes the default). Null + SdkAddressSpaceSink impls updated; DeferredAddress-
SpaceSink forwards realm through every method (the forwarding trap).
- DeferredSinkForwardingReflectionTests: existing exhaustive-forwarding guard
auto-covers the new signatures; added an explicit guard that every node-naming
sink method carries an AddressSpaceRealm parameter (RebuildAddressSpace exempt).
- OtOpcUaNodeManager: register RawNamespaceUri + UnsNamespaceUri; realm->namespace
index via NamespaceIndexForRealm; all node maps (_variables/_folders/
_alarmConditions/_nativeAlarmNodeIds/_historizedTagnames/_eventNotifierSources)
re-keyed by the full ns-qualified NodeId string so Raw and UNS nodes sharing a
bare id stay distinct; _notifierFolders already NodeId-keyed. A historized UNS
reference node registers the SAME historian tagname as its backing raw node
(both NodeIds -> one tagname). Inbound-write hook routes the full ns-qualified
NodeId to the write gateway (realm-aware) and reverts by bare id + realm.
HistoryRead seams resolve via NodeId directly. DefaultNamespaceUri kept as a
transitional alias to UnsNamespaceUri for the SubscriptionSurvivalTests.
- Test doubles across Commons.Tests / OpcUaServer.Tests / Runtime.Tests updated to
the new interface signatures; SdkAddressSpaceSinkTests asserts the UNS namespace
index for default-realm nodes.
Build: dotnet build ZB.MOM.WW.OtOpcUa.slnx = 0 errors.
Tests: Commons.Tests 310/310; OpcUaServer.Tests 335 passed / 4 pre-existing skips.
Claude-Session: https://claude.ai/code/session_01LVneM3eh1UtJxEisFXgmox
MEDIUM-1: the editor<->authoring<->deploy invariant now holds on the ScriptedAlarm
surface too. CreateScriptedAlarmAsync/UpdateScriptedAlarmAsync validate {{equip}}/<RefName>
in BOTH the predicate script and the message template (via ExtractEquipReferenceNamesFromText),
matching what DraftValidator already enforces at deploy. Refactored ValidateEquipTokenAsync
into shared LoadEquipReferenceNamesAsync + CheckEquipReferencesResolve helpers.
LOW-1: LoadEquipReferenceNamesAsync uses IsNullOrEmpty (defense-in-depth) to match
EquipmentReferenceMap.Build; empty override is already normalized->null at the write path.
LOW-3: parity test hardened with two edge cases — unresolved-ref-left-intact (both seams
leave {{equip}}/X identical) and folder+tag-group RawPath ancestry.
Tests: VirtualTagEquipTokenValidationTests 9/9 (+3 SA), parity 4/4 (+2). AdminUI 659/0.
Claude-Session: https://claude.ai/code/session_01LVneM3eh1UtJxEisFXgmox
A calc-tag add/remove/edit or a script edit changes the merged DriverConfig,
which DriverSpawnPlanner routes to an in-place ApplyDelta (not a respawn), i.e.
CalculationDriver.ReinitializeAsync. The old ReinitializeAsync ignored the new
config: the tag table + dependency-ref set were built once at construction and
never rebuilt, so after a redeploy added tags never computed, removed tags kept
publishing, and edited scripts served stale results (deploy reported success).
Part 1 (HIGH): extract RebuildTagTable(config) — shared by the ctor and reinit
so they cannot drift — and have ReinitializeAsync re-bind the new config
(ParseOptions) and rebuild _tagsByRawPath/_changeDependents/_dependencyRefs/
_stateByRawPath under _lock, preserving last-known state for surviving tags,
dropping removed tags, and starting new tags fresh. _dependencyRefs now reflects
the new authored tags. Corrected the now-false ReinitializeAsync comment.
Part 2 (MEDIUM ordering hazard): the host's ReRegister was Tell-ed synchronously
alongside the ApplyDelta Tell, so the adapter re-read DependencyRefs before the
async ReinitializeAsync rebuilt them (stale set, no self-correction). Now
DriverInstanceActor sends DeltaApplied(driverInstanceId) to DriverHostActor
AFTER ReinitializeAsync completes, and HandleDeltaApplied re-registers only that
driver's adapter — sequenced after the rebuild. Removed the inline loop.
Test: added a redeploy test to CalculationDependencyFlowTests exercising the
real DependencyMuxActor + adapter + driver — a new tag reading a NEW dep flows +
computes, a removed tag stops publishing, an edited script serves the new
result, and DependencyRefs re-registers the new set. Fails on pre-fix code
(DependencyRefs stays stale ["src/a"]), passes after the fix.
Claude-Session: https://claude.ai/code/session_01LVneM3eh1UtJxEisFXgmox
Adds the Calculation pseudo-driver (tags computed by C# scripts over other tags' live
values) plus the host seam that feeds it:
- IDependencyConsumer capability interface (Core.Abstractions) + DriverTypeNames.Calculation.
- CalculationDriver : IDriver, ISubscribable, IReadable, IDependencyConsumer — change-gate +
dedupe (VirtualTagActor parity), timer-group scheduler, Bad-transition + script-log emission,
Good recovery; reuses the T0-4 CalculationEvaluator.
- DriverHostActor spawns a DependencyConsumerMuxAdapter per dependency-consuming driver,
registering its refs on the per-node DependencyMuxActor and forwarding DependencyValueChanged
→ OnDependencyValue; re-registers on every apply, torn down with the driver.
- Factory + probe registered in DriverFactoryBootstrap (keeps the T0-3 guard green); guard test
csproj references the driver so the bin-scan discovers the factory.
- DeploymentArtifact injects the resolved scriptSource (scriptId → SourceCode) into a calc tag's
delivered TagConfig so the host-blind driver can compile it.
- DraftValidator deploy gates: CalculationScriptMissing / CalculationScriptNotFound (scriptId
existence) + CalculationDependencyCycle (DependencyGraph.DetectCycles over calc→calc edges).
- Tests: driver units (dep-ref extraction, change-gate, dedupe, Bad+script-log+recovery, timer,
read), tag-config parsing, DraftValidator gates (self/2-cycle/cross-driver-terminal), and a
Runtime integration test proving values FLOW mux → adapter → driver → calc-of-calc end-to-end.
Claude-Session: https://claude.ai/code/session_01LVneM3eh1UtJxEisFXgmox
Fix TESTS only (production already green) so the four in-scope test projects
compile + pass under the v3 dark address space:
- Core.Abstractions.Tests: drop AllowedNamespaceKinds/NamespaceKindCompatibility
from DriverTypeMetadata; rewrite EquipmentTagRefResolver tests to the single-func
RawPath-lookup contract (no parseRef/transient cache).
- Core.Tests: rewrite EquipmentNodeWalkerTests to EquipmentNamespaceContent(Areas,
Lines,Equipment,VirtualTags?,ScriptedAlarms?) — folders + VirtualTags +
ScriptedAlarms only; raw-tag variables dark (skipped Batch-4 placeholder). Drop
retired Equipment.DriverInstanceId.
- Runtime.Tests: rewrite golden corpus + TagConfigCorpusParityTests to the v3
RawPath/RawTagEntry round-trip (byte + TagConfigIntent parity; EquipmentTags dark).
Salvage VirtualTag + ScriptedAlarm artifact parity to the new Compose signature.
Retire the equipment-tag-materialization parity files (Array/Historize/Alias) and
the equipment-device-binding DeviceHost parity to documented skipped placeholders.
Skip 34 dark equipment-tag routing/value/alarm/write/discovery actor tests with a
shared DarkAddressSpaceReasons constant. Re-key cluster-scoped tests to v3 UNS
line->area attribution.
- ControlPlane.Tests: ConfigComposer round-trips re-keyed to RawFolder/Device (no
Namespaces); tag-config gate resolves driver via Device; deploy-gate collision test
re-keyed to UnsEffectiveNameCollision; drop retired BadCrossClusterNamespaceBinding
case.
- ConfigComposer: snapshot v3 tables (RawFolders/TagGroups/UnsTagReferences),
drop the retired Namespaces snapshot; RevisionHash follows the new blob.
- DeploymentArtifact: compute each raw tag's RawPath (RawFolder->Driver->Device->
TagGroup ancestry via shared RawPathResolver); per-driver RawTags + merged
DriverConfig+DeviceConfig config injected into DriverInstanceSpec via
DriverDeviceConfigMerger; ParseComposition emits an empty EquipmentTags set
(DARK until Batch 4); EquipmentNode driver/device hooks always null; cluster
scoping attributes equipment by UNS line only.
- AddressSpaceComposer: rewritten to the v3 shape (no Namespace/NamespaceKind,
no dropped Tag/Equipment fields); emits empty EquipmentTags (parity mirror).
- DriverHostActor: fan-out/write map tuple member FullName -> RawPath.
- Commons: new RawPathResolver (shared identity authority) + DriverDeviceConfigMerger
(single/multi-device endpoint+RawTags merge).
- DraftValidator: v3 rules — raw-name charset (RawPaths.ValidateSegment),
historized effective-tagname <=255, UNS effective-leaf uniqueness across
UnsTagReference/VirtualTag/ScriptedAlarm; DraftSnapshot(+Factory) carry the new tables.
- AdminOperationsActor: tag-config inspection resolves driver via Device (no
EquipmentId/DriverInstanceId on Tag).
- Tests: RawPathResolver/merger unit tests (Commons.Tests, green) +
DeploymentArtifact RawPath/dark test (Runtime.Tests, awaits WP6 corpus fixes).
Four continuous-historization types (IHistorizationOutbox, HistorizationOutboxEntry,
IHistorianValueWriter/HistorizationValue, HistorizationCommitMode) drifted into a
ZB.MOM.WW.OtOpcUa.Core.Abstractions.Historian sub-namespace while the other six files
in the same folder correctly use the root namespace. This violated decision #59's
flat-public-surface rule and left InterfaceIndependenceTests.AllPublicTypes_LiveInRootNamespace
red on master (pre-existing, predates round-2 remediation).
Move all four to the root namespace and drop/retarget the now-redundant
'using ...Core.Abstractions.Historian;' in the ~11 consumers. No behavioral change.
Verified: Core.Abstractions.Tests 129/129 (was 128/129), Runtime.Tests Historian+DI 72/72,
Gateway driver unit 102/102, full solution build 0 errors.
The DriverInstance.ResilienceConfig column was authored in AdminUI, persisted to the
entity, and serialized into the deployment artifact by ConfigComposer — but the runtime
read path dropped it: DriverInstanceSpec didn't carry it and the invoker factory always
passed null, so every driver got tier defaults regardless of its configured overrides
(a silent dead-config gap — #10's residual sub-finding).
Read-path plumbing (write side was already complete):
- DriverInstanceSpec gains ResilienceConfig; DeploymentArtifact.TryReadSpec reads the column.
- IDriverCapabilityInvokerFactory.Create takes resilienceConfigJson; DriverHostActor.SpawnChild
threads spec.ResilienceConfig; the concrete factory parses it (ParseOrDefaults, layering on the
tier), logs any parse diagnostic (never throws), and builds the invoker with the merged options.
- Invalidate-on-change: the pipeline cache keys on (instance, host, capability) and ignores options
on a hit, so Create() now Invalidate()s the instance's cached pipelines first (no-op on first
spawn) — a respawn with changed options rebuilds them.
- DriverSpawnPlanner treats a ResilienceConfig change as a stop+respawn (the invoker/options are
bound to the child at spawn); a pure DriverConfig change stays an in-place delta (no reconnect).
- Host DI passes a logger to the factory for the parse diagnostic.
Verification (deterministic): factory Create applies a retryCount:0 override to actual execution
(control test proves tier default retries), invalidates the instance's cache on re-create (scoped —
sibling survives), malformed config logs+falls-back; planner respawns on ResilienceConfig change
(incl null→json) and stays delta on a pure config change; artifact parse carries/omits the column.
Core.Tests 243 (+5), Runtime.Tests 363 (+5), Host builds clean.
The pass-through NullDriverCapabilityInvoker returns the call-site task directly, so it
never exercises the real invoker's internal `pipeline.ExecuteAsync(...).ConfigureAwait(false)`.
Adds a test-only Core reference to Runtime.Tests (the PRODUCTION Runtime assembly stays
Polly-free via the seam) and a discovery test that drives DriverInstanceActor through a real
CapabilityInvoker over a genuinely-yielding ITagDiscovery driver — proving the invoker's
internal ConfigureAwait(false) does NOT leak to the actor's own await, so the post-await
Context.Parent.Tell still runs (DiscoveredNodesReady arrives). Runtime.Tests 358, Core.Tests 238.
Remediates RESILIENCE-DISPATCH-GAP (surfaced by the 07/C-1 analyzer): the Phase 6.1
CapabilityInvoker resilience pipeline (retry / breaker / bulkhead / telemetry) was
constructed only in tests — the production dispatch layer called driver-capability
methods directly, bypassing it entirely.
The filed plan (thread CapabilityInvoker directly into DriverInstanceActor) is
INFEASIBLE: Runtime is deliberately Polly-free (references Core.Abstractions, not
Core — the same boundary IDriverFactory documents). So this introduces a seam,
mirroring IDriverFactory exactly:
- Core.Abstractions: IDriverCapabilityInvoker (+ NullDriverCapabilityInvoker
pass-through) and IDriverCapabilityInvokerFactory (+ null factory).
- Core: CapabilityInvoker now implements the interface; new
DriverCapabilityInvokerFactory builds a per-instance invoker over the
process-singleton pipeline builder + status tracker + tier resolver.
- Runtime: DriverInstanceActor takes an IDriverCapabilityInvoker (default =
pass-through) and routes all 6 dispatch sites (write, alarm-ack, subscribe,
unsubscribe, alarm-subscribe, discover) through it; per-host key resolved via
IPerCallHostResolver for single-ref calls, driver-instance key for bulk calls.
DriverHostActor builds + injects the real invoker per spawned driver.
- Host: DriverFactoryBootstrap registers the tracker, pipeline builder, and
concrete factory (needs DriverFactoryRegistry.GetTier). Runtime SCE resolves the
factory from DI like IDriverFactory; pass-through on nodes without it bound.
- Analyzer: IDriverCapabilityInvoker.ExecuteAsync/ExecuteWriteAsync are now
recognized wrapper homes (interface-typed invoker calls must suppress OTOPCUA0001
too). All 6 RESILIENCE-DISPATCH-GAP pragmas removed — the analyzer (an error in
Runtime) is now the standing regression guard.
Also adds retry / breaker-open / breaker-close LOGGING to the pipeline builder —
the operator-facing observability surface (the Admin /hosts reader, Phase 6.1
Stream E.2/E.3, was never built, so the pipeline otherwise runs silently).
Scope notes:
- Tier-DEFAULT policy only: DriverInstanceSpec (the deploy artifact) does not carry
the per-instance ResilienceConfig JSON, so overrides aren't applied yet (tracked
follow-up: plumb ResilienceConfig through the composer/artifact).
- GenericDriverNodeManager's call is NOT wired: that class is test-only scaffolding
(zero production references — the Server has its own address-space path); its
pragma is re-annotated accordingly, not left as a "tracked gap".
Verification (unit + analyzer; live behavioral gate still pending — see FOLLOWUP-10):
- Negative control: unwrapping any site fails the Runtime build with OTOPCUA0001.
- New Runtime guard (recording invoker): write routes via ExecuteWriteAsync with the
IPerCallHostResolver host; subscribe via ExecuteAsync — proves runtime routing.
- New analyzer test: the interface is a valid wrapper home.
- New pipeline-builder test: retry events are logged.
- Full solution builds clean (0 errors); Runtime.Tests 357, Core.Tests 238,
Analyzers.Tests 32 all green; pass-through default keeps existing dispatch tests
byte-for-byte unchanged.
U2 (Critical): RoslynVirtualTagEvaluator ran scripts with a CancellationToken
that a synchronous Roslyn script can never observe, so one CPU-bound/infinite-
loop virtual-tag script hung the owning VirtualTagActor forever (no timeout, no
recovery). Route evaluation through the existing TimedScriptEvaluator (Task.Run
+ WaitAsync) so the wall-clock budget is real; a runaway script now returns Bad
within the timeout instead of wedging the actor.
U3 (High): the live path cached evaluators in a raw ConcurrentDictionary never
cleared on republish, leaking a collectible AssemblyLoadContext per edited
script forever. Swap in the purpose-built CompiledScriptCache (Lazy single-
compile, dispose-on-Clear) and add an apply-boundary clear: a new narrow
IScriptCacheOwner seam the VirtualTagHostActor calls on each ApplyVirtualTags
generation (mirrors ScriptedAlarmEngine's per-generation clear).
Tests: infinite-loop-fails-within-timeout (bounded by WaitAsync so a regression
fails instead of hanging), happy-path-after-wrapping, ClearCompiledScripts-
empties-cache, and a host-actor wiring guard asserting each apply generation
calls ClearCompiledScripts (theme #1 production-caller assertion). Host.Integration
VT suite 18/18, Runtime VT suite 12/12.
PR #423 shipped GatewayTagProvisioner + unit tests but never registered it in
DI nor passed it into the AddressSpaceApplier, so deploying historized tags used
the no-op NullHistorianProvisioning and never called the gateway's EnsureTags
(confirmed live on wonder-app-vd03: zero EnsureTags calls on a historized deploy).
Addresses HISTORIAN-GATEWAY-INTEGRATION-ISSUES.md.
Issue 1 (wire provisioner):
- Runtime: AddHistorianProvisioning extension (gated on ServerHistorian:Enabled,
mirrors AddServerHistorian) + NullHistorianProvisioning TryAdd default in
AddOtOpcUaRuntime; WithOtOpcUaRuntimeActors resolves IHistorianProvisioning and
passes it into the applier.
- Gateway driver: GatewayHistorian.CreateProvisioner factory (mirrors CreateDataSource).
- Host: Program.cs calls AddHistorianProvisioning after AddServerHistorian.
- Tests: AddHistorianProvisioningTests (config-gated registration + the
register->resolve->applier->EnsureTags chain).
Issue 2 (observability): AddressSpaceApplier logs the provisioning tally on every
successful dispatch (was gated behind Failed/Skipped > 0), including dispatched=N
so a dispatched=N/requested=0 line flags the dormant no-op. +2 tests.
Issue 3 (30s HistoryRead on unprovisioned tags): root coupling fixed by Issue 1;
documented the CallTimeout knob + coupling. Default left at 30s pending the
multi-data-point investigation the issue requests (lowering risks truncating
legitimate large reads).
Issue 4 (docs): docs/Historian.md gains a "Tag auto-provisioning (EnsureTags)"
section and CLAUDE.md a wiring/gating note (both stress ServerHistorian:Enabled).
Sibling scadaproj/CLAUDE.md carries no false claim -> unchanged.
Pre-existing Serilog observation: anchor CWD to AppContext.BaseDirectory before
AddZbSerilog so the relative file sink stops landing in C:\Windows\System32 under
the Windows-service CWD.
Builds 0-error; Runtime.Tests 355, OpcUaServer.Tests 329, Gateway.Tests 99 (+4
live-skipped) all green.
Joseph Doherty