Every value verified against Opc.Ua.StatusCodes in the pinned SDK (1.5.378.106) by
reflection, not by copying siblings. All are client-visible: OPC UA clients branch on
status.
The three named in #497:
- Historian.Gateway SampleMapper "BadNoData" 0x800E0000 -> 0x809B0000
(0x800E0000 is BadServerHalted)
- Galaxy "BadTimeout" 0x800B0000 -> 0x800A0000
(0x800B0000 is BadServiceUnsupported)
- TwinCAT BadTypeMismatch 0x80730000 -> 0x80740000
(0x80730000 is BadWriteNotSupported)
BadTypeMismatch was wrong in three MORE drivers the issue did not name — FOCAS,
AbLegacy and AbCip carried the same 0x80730000. Every call site is a
FormatException/InvalidCastException conversion failure, so the name was right and
the value was wrong in all four.
Adding the reflection guard then surfaced nine further defects offline tests had
never checked:
- Galaxy GoodLocalOverride 0x00D80000 -> 0x00960000 (not a UA code at all)
- Galaxy UncertainLastUsableValue 0x40A40000 -> 0x40900000
- Galaxy UncertainSensorNotAccurate 0x408D0000 -> 0x40930000
- Galaxy UncertainEngineeringUnitsExceeded 0x408E0000 -> 0x40940000
- Galaxy UncertainSubNormal 0x408F0000 -> 0x40950000
- TwinCAT BadOutOfService 0x80BE0000 -> 0x808D0000 (was BadProtocolVersionUnsupported)
- TwinCAT BadInvalidState 0x80350000 -> 0x80AF0000 (was BadAttributeIdInvalid)
- AbCip/AbLegacy GoodMoreData 0x00A70000 -> 0x00A60000 (was GoodCommunicationEvent)
- Historian.Gateway GatewayQualityMapper Good_LocalOverride 0x00D80000 -> 0x00960000
Galaxy's whole Uncertain block read as though the OPC DA quality byte could be
shifted into the UA substatus position; it cannot — the substatuses are an unrelated
enumeration. GatewayQualityMapper already held the correct table, which is what the
Galaxy values are now reconciled against.
Guard: StatusCodeParityTests (Core.Abstractions.Tests, which already project-
references every driver) reflects over every `const uint` in the deployed
ZB.MOM.WW.OtOpcUa.Driver.*.dll whose name reads as a status code, and asserts it
equals Opc.Ua.StatusCodes.<name>. Discovery is by convention, so a new driver
assembly referenced by that project is covered with no edit here. It went red on all
nine defects above before the fixes and now checks 109 constants green.
Because reflection can only see a NAMED constant, two inline literals were hoisted so
the guard can reach them: Galaxy's BadTimeout/Bad into StatusCodeMap, and
GatewayQualityMapper's 15-entry table into a new HistorianStatusCodes. An inline
`0x800B0000u, // BadTimeout` at a call site is exactly how the Galaxy defect survived.
The drivers stay SDK-free by design; only the test project references Opc.Ua.Core,
as the oracle.
Also corrected: tests that pinned the wrong values (Galaxy StatusCodeMapTests,
SampleMapperTests, GatewayQualityMapperTests — all written from the same bad source),
a mislabelled comment in DriverInstanceActorTests, and stale constants in two design
docs, one of them the unexecuted MTConnect driver design that would have propagated
BadNoData's wrong value into a new driver.
The CLI's SnapshotFormatter value->name table was checked against the SDK and is
correct; no change needed.
Part 9 ConditionType.Quality was never assigned; default(StatusCode)==Good
so every native + scripted condition reported Good unconditionally — a
comms-lost device still showed a healthy, inactive, Good condition (a
wrong-VALUE bug, distinct from the null-value #473/#475). Clients (and HMIs
bucketing on IsGood) could not tell "genuinely inactive" from "lost contact".
Layer 1 — make Quality a real, plumbed field:
- AlarmConditionSnapshot gains OpcUaQuality Quality (default Good).
- MaterialiseAlarmCondition sets it (native BadWaitingForInitialData, scripted Good).
- WriteAlarmCondition projects snapshot.Quality; the delta-gate gains a Quality
member so a quality-bucket change fires a Part 9 event.
Layer 2 — drive native quality from driver connectivity (a comms-lost driver
emits no alarm transitions, and an alarm-bearing raw tag has no value variable,
so quality can't come from either existing channel):
- DriverInstanceActor Tells parent ConnectivityChanged on Connected/Reconnecting.
- DriverHostActor fans it to every native condition the driver owns as
OpcUaPublishActor.AlarmQualityUpdate (Good on connect, Bad on disconnect).
- New dedicated IOpcUaAddressSpaceSink.WriteAlarmQuality sets ONLY Quality and
fires only on a bucket change — never touches Active/Acked/Retain (an active
alarm that loses comms stays active). Not a full-snapshot re-projection, so it
can't clobber severity/message and works for a never-fired condition.
Forwarded through DeferredAddressSpaceSink (F10b trap; auto-verified by the
reflection forwarding guard). Ungated by redundancy role; no /alerts row.
Scripted conditions stay Good; worst-of-input quality deferred to #478 (Layer 3).
Tests: node-level (materialise/project/no-clobber/unknown-node no-op),
NativeAlarmProjector, DriverInstanceActor connectivity emission, DriverHostActor
fan-out, OpcUaPublishActor routing, and the wire-level guard
(Condition_event_Quality_tracks_source_connectivity_on_the_wire) — RED-verified
against a simulated pre-fix always-Good server. Existing DriverInstanceActor
parent probes ignore the new ConnectivityChanged.
Docs: docs/AlarmTracking.md §"Condition source-data Quality (#477)";
design doc docs/plans/2026-07-17-alarm-condition-quality-477-design.md.
A DriverInstanceActor stuck Reconnecting/Connecting now adopts a config delivered via ApplyDelta and
re-initialises with it, instead of dead-lettering and retrying the stale config forever. A monotonic
init generation supersedes the in-flight init so the corrected config always wins.
Materialised SystemPlatform/Galaxy variables previously stayed
BadWaitingForInitialData because nothing told the driver to subscribe
(OpcUaPublishActor TODO 'on a future SubscribeBulk pass') and published
values were only forwarded to the VirtualTag mux, never the OPC UA sink.
DriverHostActor now, after each apply, groups the deployment's galaxy tag
MXAccess refs by driver and sends DriverInstanceActor.SetDesiredSubscriptions;
the actor retains the set and (re)subscribes on every Connected entry, so
values resume after reconnects/redeploys (closes the F8b/#113 gap). Published
values are also forwarded to OpcUaPublishActor as AttributeValueUpdate
(NodeId == galaxy MxAccessRef) so the materialised variable shows live data.
Verified live in docker-dev: galaxy TestMachine_001 tags go Good with a
changing TestChangingInt. +1 unit test.
Adds <summary>, <param>, <typeparam>, and <inheritdoc/> tags to public
members surfaced by commentchecker — resolves 5,847 of 5,869 issues
(99.6%) across three /fixdocs passes.
Three pieces landed in one batch, closing F7-residual + Host DI #106:
Runtime/DriverInstanceActor:
- Subscribe / Unsubscribe message contracts; the Connected state
handles them via IDriver.ISubscribable. On every OnDataChange
event the actor publishes AttributeValuePublished to its parent
(DriverHostActor → OpcUaPublishActor). OPC UA StatusCode is
mapped to the 3-state OpcUaQuality enum via severity bits
(00=Good, 01=Uncertain, 10/11=Bad).
- DetachSubscription tears the handler off the driver on
DisconnectObserved, Unsubscribe, and PostStop so a stale handler
never pushes to a dead actor.
- WriteAttribute now dispatches IWritable.WriteAsync (batch of one)
with a 5s CancellationTokenSource; status-code propagated to
WriteAttributeResult on non-Good results.
Host:
- New ProjectReferences to Core + every cross-platform driver
assembly (AbCip/AbLegacy/FOCAS/Galaxy/Modbus/S7/TwinCAT).
Galaxy is net10 (gRPC client to mxaccessgw); the COM-bound net48
Wonderware Historian driver stays out of the Host's reference
closure — its .Client gRPC wrapper is what binds for historian
needs.
- New DriverFactoryBootstrap.AddOtOpcUaDriverFactories() registers
a singleton DriverFactoryRegistry, invokes each driver's
Register(registry, loggerFactory), and binds IDriverFactory to
DriverFactoryRegistryAdapter. Replaces the F7 NullDriverFactory
default so deploys actually materialise real IDriver instances
on driver-role nodes. ShouldStub() still gates per-platform
behaviour at spawn time.
- Program.cs wires AddOtOpcUaDriverFactories() before AddAkka so
the runtime extension can resolve IDriverFactory from DI.
Tests: Runtime 46 -> 52 (+6):
- Write returns success when StatusCode = Good
- Write propagates non-Good status code in failure Reason
- Subscribe forwards OnDataChange to parent as AttributeValuePublished
- Quality translation: Uncertain (0x40...) and Bad (0x80...)
- Subscribe against non-ISubscribable returns failure
- DisconnectObserved detaches handler so late events are dropped
All 6 v2 test suites green: 152 tests passing.
Closes F7. F7-residual sub-tasks #110 (subscribe) and #111 (write)
both shipped. Host DI binding #106 shipped.
Joseph Doherty