#694 item 3 — historiangw#27 is fixed and now live-verified through OtOpcUa:
- ServerHistorian:Gateway:EnableNativeTimeWeighted defaults to true (false is
the kill switch for a gateway older than 9f711c1). TimeAverage / Total are
served and advertised again (12 aggregates).
- The gateway sends the interval as max(1, round(ms)) and AVEVA clips its last
interval at the request end (live). NativeAggregatePlan therefore sends a
multi-interval grid only for whole-ms intervals; a fractional interval is read
one interval per request (at most 1,000, else BadTooManyOperations), and every
one-interval request goes out rounded UP to whole ms so AVEVA answers one
clipped row. Live, a 3.0004 s clipped interval sent at its own width lost its
last 0.4 ms (Total 123 vs 123.0172).
#746 — HistorianGateway Contracts/Client 1.0.0 surface:
- Alarm history: GatewayAlarmHistorianWriter sends SendEvents batches of <=200.
A failed per-event result is re-sent alone via SendEvent (classified as
before); a refused batch (InvalidArgument etc.) goes event by event so a
poison event dead-letters alone; a systemic fault retries the rest without
sending more; Unimplemented (older gateway) falls back to SendEvent for good.
IHistorianGatewayClient.SendEventsAsync defaults to Unimplemented.
- Events reads: a capped page sends cap + 1 as ReadEventsRequest.max_events, so
the gateway completes the stream instead of the client cancelling it. An
ambiguous capped answer (foreign rows filtered out of the server's cut) or a
refused cap is re-read uncapped with the existing EventDrainBudget drain.
Tests: GatewayServerCappedEventsTests, GatewayAlarmWriterBatchTests,
GatewayNativeWholeMillisecondGridTests (gateway-faithful rounding fake), gate
tests flipped to the new default; every new test mutation-checked (each
mutation of the production change fails at least one). Live harness
AvevaGatewayHistorianFollowupsLiveGateTests (read-only) for #694/#700/#746.
Claude-Session: https://claude.ai/code/session_01GT67ACmpMR7b9LGRPLijMi
The drain gate's 'is my queue-sharing peer Primary?' used only the host of
LocalDb:Replication:PeerAddress, which the passive half (ApiKey +
SyncListenPort) does not set - so as Secondary it kept draining beside its
Primary partner and every alarm event reached the historian twice.
DriverHostActor takes a sharesAlarmQueueWithLocal predicate used when no
peer host is known; WithOtOpcUaRuntimeActors builds it
(BuildAlarmQueuePeerPredicate) for a SharesRowsWithPeer node with no
PeerAddress as 'a member of my own cluster-{ClusterId} mesh other than
me'. A node sharing no rows, or with no mesh role, gets none and keeps
draining. AlarmHistorian.md / Redundancy.md / pair-replication runbook
updated.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
Review R1:
- M1 (#609): DriverHostActor.StopChild releases the instance's resilience state before evicting the hub.
- m2 (#597): DriverHostActor publishes ShouldServiceAsPrimary() to IDriverPrimaryRoleSource at start and on
cluster membership changes (deduped), so the native-ack gate denies in a pair's boot window.
- m4 (#601): ApplyCachedArtifact returns false on empty/malformed bytes; the cached revision is not adopted,
Direct mode goes Stale (no RUNNING FROM CACHE), FetchAndCache lands Steady-with-no-revision and a
re-dispatch of the same revision really applies.
- m3 (#603): LocalDbReplicationPolicy splits into CapturesChanges (PeerAddress||ApiKey, registration) and
SharesRowsWithPeer (ApiKey && (PeerAddress||SyncListenPort>0), alarm drain gate).
- m5 (#618): Program.cs catch-all filters HostAbortedException (design-time tooling).
- m6 (Cluster-002): ClusterRoleInfo seeds only Up/WeaklyUp members.
Claude-Session: https://claude.ai/code/session_01Ef2ozxS7QPanGT8uoATbTe
Enables the alarm store-and-forward sink on all four driver nodes of the
docker-dev rig -- the replicating site-a pair and the default-OFF site-b pin
-- so the live gate has a real buffer to watch converge, and can see that
site-b's sink works as a plain node-local queue with no peer traffic.
Two rig details worth stating rather than rediscovering. The endpoint is
deliberately unresolvable: there is no HistorianGateway here, so every drain
attempt fails, which is exactly the historian-outage state the buffer exists
for. But it still has to be a syntactically valid absolute http(s) URI or the
host refuses to start, because ServerHistorianOptionsValidator is
consumer-gated -- AlarmHistorian:Enabled=true makes the endpoint required
even while ServerHistorian:Enabled=false. And MaxAttempts is raised far above
the production default of 10, which against a permanently unreachable gateway
would dead-letter the entire queue about five minutes in, turning a buffering
test into a dead-letter test.
Docs record what an operator now has to know: that a rising queue depth on a
Secondary is correct and on BOTH nodes is not (that shape is a redundancy
snapshot naming neither node -- check node identity before suspecting the
sink), that delivery is at-least-once across a failover by design with no
dedup layer, and that AlarmHistorian:DatabasePath is removed but should be
left in place through the upgrade because the migrator still reads it to find
the file to copy.
Claude-Session: https://claude.ai/code/session_01GASWkNEi68FSCtvr6rLoEW
HistorianGateway is now the sole historian backend (read + alarm SendEvent +
continuous WriteLiveValues). Document the final state and retire the Wonderware
sidecar from the docs/config/labels:
- CLAUDE.md: rewrite the Historian section — ServerHistorian /
ContinuousHistorization / AlarmHistorian config keys, the IHistorianProvisioning
EnsureTags hook, the GatewayAlarmHistorianWriter SendEvent path + ReadEvents
dependency on gateway RuntimeDb:EventReadsEnabled=true, gateway-side
prerequisites (RuntimeDb flags + historian:read/write/tags:write scopes),
migration note, and two KNOWN-LIMITATION callouts (live-validation gate +
empty historized-ref-set recorder follow-on).
- appsettings.json: fix the stale ServerHistorian block (Host/Port/SharedSecret/
ServerCertThumbprint -> Endpoint/ApiKey/UseTls/AllowUntrustedServerCertificate/
CaCertificatePath/CallTimeout, keep MaxTieClusterOverfetch); add a disabled
ContinuousHistorization block; prune the orphaned Wonderware keys from
AlarmHistorian (keep the SQLite knobs). ApiKey env-supplied via
ServerHistorian__ApiKey (commented; valid strict JSON via _comment keys).
- README.md + docs (Historian.md, AlarmHistorian.md, Configuration.md,
ServiceHosting.md, DriverLifecycle.md, drivers/README.md, Uns.md, VirtualTags.md,
AlarmTracking.md, Client.UI.md, README.md, TestConnectProbes.md): retire the
Wonderware historian backend from current-backend descriptions; fix the stale
ServerHistorian/AlarmHistorian config tables (now gateway shape); convert
drivers/Historian.Wonderware.md to a retired stub pointing at the gateway.
- Source/UI labels (descriptive text only, no behavior change):
OtOpcUaServerHostedService.cs, HistoryPaging.cs, OtOpcUaSdkServer.cs,
HistorianAdapterActor.cs, VirtualTagModal.razor, ScriptedAlarmModal.razor,
AlarmsHistorian.razor now name the HistorianGateway backend.
Build clean (0 errors); AdminUI.Tests green (514 passed).
Claude-Session: https://claude.ai/code/session_012SDSQ3AcaXqPcBtDESBRii
Joseph Doherty