AlarmConditionState.Severity mixed two conventions: OPC UA rows carried Part 9
Severity (higher = more severe) while MxGateway native alarms and computed
alarms carried a raw AVEVA-style priority (1 = most urgent). Every consumer
ranks higher as worse, so Worst Severity, the severity filter/sort and the
site event-log Error threshold picked the LEAST urgent MxGateway/computed
alarms.
- AlarmPriorityBands: the OtOpcUa GalaxyAlarmPriority table (lmxopcua#887,
b61f3e05), value for value: 1-250 -> 1000, 251-500 -> 750, 501-750 -> 500,
751-999 -> 250; <= 0 clamps to Critical, > 999 to Low.
- MxGatewayAlarmMapper bands the gateway severity (= AVEVA priority);
AlarmConditionStateFactory.ForComputed bands PriorityLevel. OPC UA unchanged.
- AlarmConditionState gains trailing Priority (int?): the raw source number,
exactly the pre-#129 Severity. AlarmStateChanged.Priority and the wire
AlarmStateUpdate.priority keep that meaning (no proto change); central derives
Severity by kind (SeverityFromPriority), so an older site decodes correctly.
- ScriptAlarm gains trailing Priority. The native MES 900-999 band and the MES
API Severity/MinSeverity/MaxSeverity key off Priority; rig seed scripts moved
from a.Severity to a.Priority, so MES output is unchanged.
- AlarmActor raise logs Error when the banded severity >= 700 (same threshold
as NativeAlarmActor): priority 1-500 Error, 501+ Warning (was raw >= 700).
- NativeAlarmActor upgrades pre-#129 native_alarm_state rows on rehydrate.
- Debug snapshot decode restores Condition.Priority from the row's priority.
- Docs: Commons, DCL, SiteRuntime, Communication, CentralUI, InboundAPI,
HighLevelReqs, MES alarm-status plan, CLAUDE.md.
Claude-Session: https://claude.ai/code/session_01GT67ACmpMR7b9LGRPLijMi
WithSiteCredentials always composed the per-site PSK over
ChannelCredentials.Insecure. Grpc.Net.Client refuses that on an https
address ("insecure channel credentials and can't use a HttpClient with a
'https' scheme"), so every https control-plane endpoint threw at channel
construction - in SitePairChannelProvider the throw was caught and the
site address logged as malformed, i.e. a TLS site was silently
undialable. The old comment claiming TLS needed no change here was wrong.
WithSiteCredentials now takes the endpoint: https composes over
ChannelCredentials.SecureSsl (PSK retained inside TLS, no insecure
opt-in); anything else, including callers that omit it, keeps the
previous composition unchanged. SitePairChannelProvider,
SiteStreamGrpcClient and CentralChannelProvider pass their endpoint. The
three AuditLog pull clients are deliberately left for after #42.
Tests: real Kestrel HTTP/2-over-TLS (ALPN) with the real
ControlPlaneAuthInterceptor - correct PSK accepted, wrong PSK still
PermissionDenied, untrusted server cert fails with an
AuthenticationException cause, the pre-fix composition throws on https,
http composition unchanged; plus each production builder accepts https
(mutation check: disabling the TLS branch turns those red).
Claude-Session: https://claude.ai/code/session_01GT67AEHd2Acv1YPwGfXEoV
Central's Debug View live stream and Alarm Summary cache always saw false
because neither wire message had the field. Additive proto fields, vendored
C# regenerated with docker/regen-proto.sh (sitestream + sitecommand), mapped
both ways in StreamRelayActor/SiteStreamGrpcClient and SiteCommandDtoMapper.
The live stream publishes Alarm Actor events, which never carried the flag,
so InstanceActor.HandleAlarmStateChanged now stamps it before retaining and
publishing. A pre-#60 site sends the proto3 default. No UI badge yet.
Claude-Session: https://claude.ai/code/session_01GT67AEHd2Acv1YPwGfXEoV
Each cached client records when it was last handed out; a periodic sweep (half of the new
CommunicationOptions.GrpcClientIdleTtl, default 30 min, 0 disables) disposes and removes entries
unused for the TTL that have no live subscription (SiteStreamGrpcClient.ActiveSubscriptionCount).
Lookup and the sweep's check-and-remove share one lock so a handed-out client is never disposed
under its caller; an evicted client is re-created on next GetOrCreate.
Comment/XML-doc changes only, no code logic:
- strip project-tracking references (WP*, P*-*, row-NN, #NN, Task N) from
comments, keeping the explanatory rationale
- add missing summaries, <param>, <returns>, <typeparam> and <inheritdoc/>
- replace misused <inheritdoc/> with real docs; where <inheritdoc/> was
combined with useful remarks, move the rationale into // comments
- drop stale replicationActor <param> on DeploymentManagerActor ctor
Remaining 5 are false positives (CWE-1236 x2, failures-1, year-0001, M365).
Build 0 errors / 0 warnings.
Flow Debugger (design 2026-09-05 §5.3/§5.4): AttributeValueUpdate fields 7/8 stamped by
StreamRelayActor and parsed by SiteStreamGrpcClient (older frames => null/false). New
PullTraceEvents unary RPC on SiteStreamService (same PSK-gated prefix as PullAuditEvents):
a point read of the site audit SQLite by ExecutionId OR ParentExecutionId
(ISiteAuditQueue.ReadByExecutionIdsAsync, json_extract on the codec's camelCase keys, new
IX_audit_event_occurred index, 64-id / 2000-row caps) that moves no cursor and flips no
ForwardState. Central IPullTraceEventsClient/GrpcPullTraceEventsClient mirror the audit pull
client (endpoint resolution, NodeB failover, fault => empty) and register beside it.
Claude-Session: https://claude.ai/code/session_01GSLkkHKz9JrAtmJjmQK3cP
Every AttributeValueChanged/AlarmStateChanged rode its own gRPC message on
SiteStreamService; at target scale that is ~37.5k messages/s/site of pure
framing overhead. Coalesce them, additively, with no new RPC.
Wire (sitestream.proto, regenerated via docker/regen-proto.sh sitestream):
InstanceStreamRequest.batching_supported = 3
SiteStreamRequest.batching_supported = 2
SiteStreamEvent.batch = 4 (new oneof case)
SiteStreamEventBatch { repeated SiteStreamEvent events = 1 }
The proto3 default of batching_supported IS the negotiation, and it is
load-bearing: a batch frame reaches a pre-R2 central as EventOneofCase.None,
whose ConvertToDomainEvent returns null — the whole batch would vanish with
no error anywhere. An old central cannot set the flag so it never receives
one; an old site ignores the unknown request field and keeps sending
per-event frames, which the new client's ForEachEvent handles as the
single-event case. Both skew directions are covered by tests that go through
a real proto serialize/parse round-trip.
Server: SiteStreamEventBatcher, a per-subscriber pump replacing the handler's
await-foreach/WriteAsync loop and byte-identical to it at a cap of 1. It
never delays a lone event — it drains the already-queued backlog for free and
lingers only once a backlog is proven — emits a single-event buffer as a
plain frame, preserves order and per-event Timestamps exactly, and flushes
what is buffered when the send channel's writer completes. It sits DOWNSTREAM
of StreamRelayActor's bounded DropOldest channel, so it changes framing only
and does not move the burst ceiling (deferred register row 31, which lives in
the shared publish stage upstream of the BroadcastHub).
Client: sets the flag on both subscriptions and unpacks in order into the
existing per-event pipeline, so SiteAlarmAggregatorActor,
DebugStreamBridgeActor, consumer-keepalive/orphan logic,
reconnect-on-graceful-completion, generation fencing, the (siteId, endpoint)
factory key and IsLive semantics are untouched.
Options (validated): GrpcStreamBatchMaxEvents 100 (1 disables),
GrpcStreamBatchWindow 25 ms — validated strictly under 250 ms, the load
test's end-to-end P99 threshold. Measured worst case (trickle-with-backlog,
window-bound rather than cap-bound): P50 13.8 ms, P99 25.4 ms, max 25.8 ms;
cap-bound case sent 600 queued events in 6 frames.
Telemetry: histogram scadabridge.site.stream.batch_size tagged by stream
kind, recorded only on negotiated streams (per-event otherwise). It rides
ScadaBridgeTelemetry.MeterName, already in the ObservedMeters allowlist.
Docs: Component-Communication.md gains an Event Batching section; CLAUDE.md's
gRPC streaming bullet records the wire shape and the negotiation rationale.
F1 (HIGH) DebugStreamBridgeActor: the 5-minute orphan net measured the MAILBOX
(SetReceiveTimeout), and once stream events were correctly marked
INotInfluenceReceiveTimeout nothing recurring reset it — the snapshot lands once
and GrpcStreamStable once — so every healthy session self-terminated at ~6 min
with a false "Site disconnected". Replaced with a periodic self-tick
(ConsumerLivenessCheckInterval, 30s) over a consumer-last-seen stamp renewed only
by DebugStreamConsumerAlive, which DebugStreamService Tells on a shared timer to
every session still in its registry (holding a session there IS "a consumer is
attached" — both the Blazor view and the SignalR hub release it on
dispose/disconnect, and it works headless). Reverting the wrapper was rejected: it
would restore the quiet-instance orphan bug.
F2 (MED) SiteStreamGrpcClient: the RpcException(Cancelled) filter now requires
cts.IsCancellationRequested. A peer-originated / channel-dispose Cancelled fired
none of onError/onCompleted/onConnected, leaving SiteAlarmAggregatorActor with
_streamDown=false forever (IsLive stuck true, reconcile reopen guard never fired).
F3 (MED) SiteStreamGrpcClient: a header TIMEOUT is no longer reported as
connected — that shape is exactly what an unreachable site produces, and it
cleared _streamDown, consumed _seedOnConnect and launched a full snapshot fan-out
at a dead site. AwaitHeadersAsync returns bool; the first received event is the
fallback connected signal, fired at most once from headers OR first event.
F4 (LOW-MED) SqliteAuditWriter.MarkReconciledUpToAsync: the blanket below-cursor
UPDATE retired late-stamped inserts that were never served (then age-purged —
silent loss). The flip is now bounded by insertion order: a Pending row retires
only if its rowid is at or below the high-water mark of rows this instance has
served from ReadPendingSinceAsync (clamped on purge, since SQLite reuses rowids);
Forwarded rows are exempt (central ACKed them over the push path). At-least-once
is unchanged.
F5 (LOW) Documented the liveness dependency (a served row never covered by a later
cursor stays Pending forever; PurgeExpiredAsync never purges Pending) in
ISiteAuditQueue + Component-AuditLog.md, and added a cheap site-health signal:
SiteAuditBacklogReporter logs a rate-limited warning when the existing
oldest-pending metric exceeds 24h.
F6 (MED) SiteAlarmAggregatorActor: _fanoutSinceLastTick was armed by the
reconcile's OWN fan-out, so steady state ran fan-out→skip→fan-out→skip — one
reconcile per 2x interval (120s), halving the not-reporting refresh and the alarm
reconcile backstop. The skip is now armed only by connect/failover-driven seeds
(initial, _seedOnConnect, and a re-seed queued behind one).
Tests: Communication.Tests 691 passed (+13), AuditLog.Tests 382 passed (+5).
MES alarm-status API §6.4 (docs/plans/2026-06-30-mes-alarm-status-api.md,
Phase 1 task 1). MES needs a real AckDT for a triggered alarm, and the mirror
carried acked-vs-unacked but never WHEN. AckTime now rides the whole path:
DCL transition -> AlarmStateChanged -> gRPC AlarmStateUpdate -> site SQLite.
Stamping rule, identical on both protocols: non-null ONLY while the condition
is active AND acknowledged. That single predicate yields all three required
behaviours -- null while unacked, cleared on re-raise (a re-raise arrives
unacknowledged), and no phantom ack on a return-to-normal. The last one is
load-bearing for MxGateway, which maps INACTIVE to Acknowledged = true; without
the active check every clear would claim an ack the system never observed.
Provenance is honest, never fabricated:
- OPC UA A&C supplies a TRUE ack instant, so we now select it:
AcknowledgeableConditionType/AckedState/TransitionTime at SelectClause
index 18, APPENDED so the positional reads at 0-17 keep their meaning.
Servers that omit the field fall back to the event's own Time.
- MxAccess Gateway supplies none, so the ack transition's own timestamp is
used -- accurate to when the system SAW the ack. An ACTIVE_ACKED
re-subscribe snapshot restores one from LastTransitionTimestamp rather
than dropping it.
The decision lives in pure mappers (Opc/Mx AlarmMapper.DeriveAckTime), so it is
unit-tested with no live server or gateway.
Additive-only throughout: init-only property on AlarmStateChanged, trailing
optional positional on NativeAlarmTransition (all 14-arg call sites untouched),
proto field 24 (never reusing a number) regenerated via docker/regen-proto.sh
sitestream with the csproj diff verified empty.
Persistence rides native_alarm_state's existing metadata_json blob rather than
a new column -- deliberately. That table is RegisterReplicated in
SiteLocalDbSetup and LocalDb builds its CDC triggers from the column list at
registration time, so an additive JSON property changes no schema, no triggers
and no replication contract; metadata_json is exactly the extension point UA4
introduced for this. Rows written before the field deserialize it as null.
Tests: 4 OPC UA + 6 MxGateway mapper cases, 3 NativeAlarmActor (emit,
failover rehydrate, pre-AckTime row), 1 proto round-trip incl. the null case,
4 Commons additive/back-compat. The OPC UA SelectClause count lock-in moves
18 -> 19 with an index-18 assertion -- intended, the clause is appended, which
is precisely what that guard exists to make visible.
Phase 0 of the ClusterClient→gRPC migration
(docs/plans/2026-07-22-clusterclient-to-grpc-plan.md). Standalone hardening: it
closes a gap that exists today and is a precondition for moving command/control
onto gRPC in later phases.
T0.1 — delete the ManagementActor ClusterClientReceptionist registration.
It was built for an out-of-cluster CLI that was never written: the shipped CLI
speaks HTTP Basic to /management, which asks the actor in-process through
ManagementActorHolder. Nothing in the repo ever sent to /user/management. The
actor still runs there; only the cross-boundary advertisement is gone. Six
documents claimed the CLI used ClusterClient — including the CLI's own README
"Architecture Notes" — and are corrected here rather than left to rot.
T0.2 — record, do not port, the dead integration-routing path.
IntegrationCallRequest is unwired at BOTH ends: RouteIntegrationCallAsync has
zero callers anywhere, and RegisterLocalHandler(Integration, …) appears only in
a test, so production always answers "Integration handler not available". It is
excluded from the gRPC contract (28 of 29 commands migrate) rather than
enshrined on an additive-only wire format, and deleting it during a
transport migration would mix a behavioural change into a change whose whole
value is that behaviour is identical. See
docs/known-issues/2026-07-22-integration-call-routing-is-dead-code.md.
T0.3 — preshared-key authentication on SiteStreamService.
The service shipped with no auth at all: plaintext h2c, no interceptor, so
anything that could reach a site node's :8083 could open a live data stream or
read audit rows back via PullAuditEvents/PullSiteCalls. ControlPlaneAuthInterceptor
now gates /sitestream.SiteStreamService/ — modeled on LocalDbSyncAuthInterceptor
(constant-time compare, fail-closed, PermissionDenied) but gating a SET of
service prefixes so phases 1A/1B add services rather than interceptors. LocalDb
sync keeps its own separate key: it authenticates the pair partner, not central,
and collapsing the two would make a site's central-facing key also admit writes
into its database.
Keys are per site (SB-GRPC-PSK-<siteId>), never fleet-wide, so a compromised
site yields only its own. Central attaches them through ControlPlaneCredentials,
which binds CallCredentials to the channel — covering unary and streaming
uniformly, and letting the key resolve asynchronously, which a client
interceptor could not do without blocking. All three central→site channel
creation sites go through it (SiteStreamGrpcClient and both audit pull invokers);
the pull invokers' channel caches are re-keyed by (site, endpoint) because
credentials are per-site and bound to the channel.
Two decisions beyond the plan:
* StartupValidator now requires GrpcPsk on Site nodes. The plan specified only
the runtime gate, but fail-closed with no boot check produces a node that
joins, answers heartbeats and reports healthy while refusing every stream,
audit pull and telemetry ingest — silent and total. Same reasoning as the
existing inbound API-key pepper rule.
* Added Communication:SitePsks as a central-side key map. The plan assumed
central would read the store, seeded via a dev KEK; the docker rig
deliberately boots with no master key, so store-only resolution would leave
it unable to dial its own sites. The store stays primary — it is the only
source that can serve a site added at runtime — with the map covering
key-less hosts and one-off pins. Neither source falling back to
"unauthenticated" is the invariant.
T0.4 — dev keys on both rigs and tests.
34 tests. The seven that matter most exercise a real in-process gRPC stack over
TestServer: the unit tests on either side of the wire would both stay green if
the halves disagreed, and gRPC refuses call credentials on a plaintext channel
by default — the UnsafeUseInsecureChannelCallCredentials opt-in is only provable
by making a real call. They confirm correct key passes on unary AND streaming,
wrong key and no-credentials both get PermissionDenied, and an unresolvable key
fails the call with nothing reaching the service.
OPERATIONAL: a site node upgraded to this build without a key will not boot.
That includes the gitignored deploy/wonder-app-vd03/ overlay.
Add SiteStreamGrpcClient.SubscribeSiteAsync mirroring SubscribeAsync but for
the site-wide, alarm-only SubscribeSite RPC: builds a SiteStreamRequest, opens
the server stream, and delivers each event via a typed Action<AlarmStateChanged>
callback (this stream is alarm-only by contract, so Task 4's per-site cache
consumes an alarm delta with no downstream type test). Reuses the shared
enrichment mapping via a new internal ConvertToAlarmEvent helper that returns
null for any non-alarm event, defensively filtering anything that should never
appear on the stream. Factory unchanged - it already caches a client per
(site, endpoint). Adds focused unit tests for the alarm-only filter and the
test-only-client guard.
Claude-Session: https://claude.ai/code/session_01MtdgwpEeCUn6cUA5f1LMPj
Add two additive init-only fields to AlarmStateChanged so the Debug View can
nest live native conditions under their configured source-binding node:
- NativeSourceCanonicalName (binding canonical name, e.g. "Motor1.MotorAlarms")
- IsConfiguredPlaceholder (quiet-binding placeholder flag; default false)
Flow on BOTH cross-process paths:
- Live: proto AlarmStateUpdate fields 22/23 -> StreamRelayActor packs ->
SiteStreamGrpcClient unpacks (regenerated SiteStreamGrpc/Sitestream.cs).
- Snapshot (Newtonsoft): record defaults carry through; no special handling.
NativeAlarmActor.Emit now stamps NativeSourceCanonicalName = _source.CanonicalName.
Additive-only: no existing positional constructor or wire frame changed.
Tests: StreamRelayActorTests round-trips both fields pack->unpack;
NativeAlarmActorTests asserts the emitted event carries the binding canonical name.
Resolve all 622 issues flagged by the enhanced CommentChecker: add missing
<returns> tags (incl. the standard phrasing on non-generic Task methods),
add missing <summary> tags, and replace misused/redundant <inheritdoc/> on
members that override or implement nothing with real documentation.
Documentation-only — no behavior change; solution builds clean.
Joseph Doherty