4d39ad3cd7fca61dbe6378b1660ed52ef2be68aa
2509 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Joseph Doherty
|
4d39ad3cd7 |
Merge rows 80+73+71: nullable LocalDb health fields on unreplicated sites (Host supplies ReplicationIsConfigured), StartupReconcilerActive on the health report (proto field 29) with central No-self-heal badge, standby active-node ERR downgraded via narrowly-keyed Serilog filter
# Conflicts: # CLAUDE.md |
||
|
Joseph Doherty
|
9f418a6aea | Merge row 34: site_events purge burst measured (2.73M-row worst case = 2.7x MaxOplogRows) and paced — shared 250k/tick budget, 5-min catch-up, ceiling-hit counter | ||
|
Joseph Doherty
|
dd2391abe2 | Merge small-fixes wave: rows 74-77, 62, 79-runbook (gauge delta asserts, Approve caution styling via DialogSeverity, CLI README sample, ActorCell sweep clean, ISiteEventLogger lifetime pin, OrbStack/virtiofs runbook) | ||
|
Joseph Doherty
|
d9a35846d9 |
perf(siteeventlog): pace the site_events purge burst — per-tick delete ceiling + accelerated catch-up (row 34)
Measured the unbounded purge burst and found it can force a full ten-table
snapshot resync, then bounded it. No purge-exemption path was added — the
deletes are still CDC-captured like any other write, which stays ruled out
by design; what changed is how many a single tick performs.
MEASURED (harness: real EventLogPurgeService over a real LocalDb file with
site_events genuinely RegisterReplicated, plus a two-node loopback gRPC
replication pair; docker rig untouched):
393 bytes/row incl. indexes => a 1 GB event log holds ~2,731,947 rows.
Expiring all of them in ONE tick: 285 s, 2,731,947 oplog rows,
284 MB oplog payload, 2.73 M row-version tombstones (7-day retention),
i.e. 2.7x LocalDb's MaxOplogRows default of 1,000,000. Crossing that makes
the 60 s maintenance tick prune the oplog and set needs_snapshot — a FULL
snapshot of all ten replicated tables, bought by a routine retention purge.
The resident backlog is produced-minus-drained, so a healthy peer blunts it:
on loopback the same burst peaked at 391,424 and cleared in 6.0 min. That is
the problem, not the reassurance — the old safety margin was a function of
peer throughput and vanished with the peer down. A bounded tick is safe at
any peer speed.
Drain is not a bottleneck: 7.6k-19.8k tombstones/s (20k / 500k / 2.73M runs).
SHIPPED:
- SiteEventLogOptions.MaxPurgedRowsPerTick (default 250,000; 0 = unlimited
escape hatch, negatives rejected). One SHARED budget across the retention
purge and the cap trim — two independently-capped phases would let a tick
emit twice the intended burst. 4x margin under MaxOplogRows, which is also
shared with every other replicated table's ordinary traffic.
- SiteEventLogOptions.PurgeCatchUpInterval (default 5 min, validated > 0 and
<= PurgeInterval). Without it pacing would make retention converge in 11
DAYS at the daily cadence; with it the worst case converges in ~11 ticks
(~55 min), every burst bounded. 5 min rather than 1 so ticks cannot outrun
the peer's drain and re-accumulate the backlog.
- A ceiling is claimed only when work genuinely remains (bounded EXISTS probe),
so an expired set landing exactly on the budget does not arm a no-op retry.
- Visibility: rate-limited (15 min) Warning naming the ceiling and the
accelerated interval, plus an unthrottled counter
scadabridge.site.event_log.purge_ceiling_hits — its SHAPE distinguishes a
backlog converging from a site whose event rate outruns one paced tick.
- The purge loop is a delay loop rather than a PeriodicTimer, so its cadence
now anchors to the END of the previous purge. Documented.
ROW-33 INTERPLAY VERIFIED: pacing lowers each spike and lengthens total purge
duration, but a full 250k tick drains in ~23 s (~4 min even at 10x a real
link's penalty) against the 15-minute sustained dwell and a 5-minute gap to
the next tick. The UNPACED 2.73M burst had only 2.5x of margin (6.0 min), so
pacing makes the badge assumption robust rather than merely preserving it.
Docs travel together: Component-SiteEventLogging.md, topology-guide.md
("Reading the replication backlog" + the row-33 badge note), CLAUDE.md's
purge-burst sentence, and a dated measurement/decision note under docs/plans/.
Fail-before: the new behavioural tests do not compile against the pre-fix
service (RunPurge was void); with PurgeBudget neutralised to always-unlimited,
6 of the new tests fail and all 19 pre-existing ones pass.
Tests: SiteEventLogging 93/93, Commons 715/715, HealthMonitoring 115/115,
Host 505/505. Solution build clean.
|
||
|
Joseph Doherty
|
8b761841bc |
fix(logging): row 71 — stop logging the standby's by-design active-node verdict at ERROR
A healthy standby logged "Health check active-node with status Unhealthy … 'not the site pair primary (standby)'" at Error on every probe — every 10s on a site node, and (discovered while fixing this) every 5s on a central standby, which Traefik health-probes at that cadence. Correct-by-design state at an alarming severity: it floods the log and trains operators to ignore ERR. Mechanism: DefaultHealthCheckService logs one line per check per probe and picks the level from the verdict — Debug/Warning/Error for Healthy/Degraded/Unhealthy. Both active-node checks answer Unhealthy on the standby because 503 IS the contract /health/active publishes. There is no IHealthCheckPublisher in this repo, so each line is one inbound HTTP probe. Fix: one Serilog exclusion filter in LoggerConfigurationFactory. A level override could not work — Serilog's MinimumLevel.Override only RAISES a per-source floor, and a LogEvent's Level is immutable, so neither an override nor an enricher can rewrite Error as Information. Changing the check to report Degraded was rejected: it would alter the HTTP status that /health/active publishes, which is load-bearing for Traefik and the family dashboard. The constraint (genuine failures must still log at Error) is preserved by keying the predicate on the check NAME rather than the logger category: localdb, akka-cluster, database and required-singletons keep their Error lines, and the active-node check has no error path of its own — the active node always answers Healthy — so the only event this can ever suppress is a standby reporting that it is a standby. The verdict stays fully observable via /health/active's own HTTP status, the readiness probe's cluster view, and the health dashboard. Also corrects a stale CLAUDE.md claim found while verifying what consumes this check: "/health/active is central-only (site nodes map no /health/* at all)" is wrong — SiteServiceRegistration registers akka-cluster + localdb + the role-scoped SitePairActiveNodeHealthCheck, and Program.cs's Site branch calls MapZbHealth() on the HTTP/1.1 listener. Fail-before evidence: with the filter behaviourally disabled, StandbyActiveNodeVerdict_IsNotLogged fails "Collection was not empty" while the other 9 tests in the file — the must-still-log constraints — pass either way, which is what proves the filter is narrow rather than a blanket suppression. Tests: Host 518 green (10 new). |
||
|
Joseph Doherty
|
a2f0086fa1 |
fix(health): rows 80+73 — unconfigured replication reports null, reconciler presence surfaced
ROW 80 (observability correctness). An unreplicated site published
LocalDbReplicationConnected=false / LocalDbOplogBacklog=0, contradicting the
nullable semantics every doc and the proto already state ("null means no
reading, NOT disconnected with an empty backlog").
Root cause: the replication engine is registered unconditionally and idles
without a peer, so ISyncStatus answers false/0 on a node that was never meant to
replicate, and LocalDbReplicationStatusReporter passed that straight through.
Two consequences: an operator read connected:false on a healthy site as a fault,
and central's null branches — row 33's conditional KPI emission and
sustained-badge anchor exclusion — never received the null they exist for, so
rig site-b/site-c emitted a permanently misleading
localDbReplicationConnected=0 series.
Fix mirrors the SiteEventLogReplicationCheck precedent: the Host evaluates
SiteLocalDbSetup.ReplicationIsConfigured ONCE and passes it to
AddLocalDbReplicationHealthBridge as a third provider; unconfigured
short-circuits the probe to (null, null). HealthMonitoring never reads LocalDb
config itself, and the same captured value now also feeds
SiteEventLogReplicationCheck so the two surfaces cannot disagree.
ISiteHealthCollector.SetLocalDbReplicationStatus widens to bool? — the
non-nullable bool was the type-level root cause (null was inexpressible).
false now means exactly one thing: configured, peer session down = a real fault.
Wire/central/UI needed no change: the proto already carries BoolValue/Int64Value
wrappers and the aggregator + KPI source already branch on null. This makes code
match doc, so no doc claim was weakened.
Watch the trap that caused this: configured-ness is PeerAddress OR ApiKey (only
the dialling half sets a peer address). The pre-existing SiteLocalDbWiringTests
fixture sets ApiKey and IS a replicating node, so its false/0 assertion is
correct and is kept, with a comment saying so; the new
UnreplicatedSiteLocalDbHealthTests fixture is the genuinely-unreplicated one.
ROW 73 (silent loss of self-heal). AkkaHostedService skips
SiteReconciliationActor when no IDeploymentConfigFetcher is resolvable, and that
skip was a lone boot Warning — a node with no self-heal path at all went on
reporting itself perfectly healthy forever.
Adds tri-state SiteHealthReport.StartupReconcilerActive (null = not reported,
i.e. the central self-report or a pre-row-73 site build; true = running;
false = booted without it), latched once at boot by the Host in both branches.
Additive proto field 29 (BoolValue, vendored C# regenerated via
docker/regen-proto.sh centralcontrol; csproj restored, verified empty diff).
The skip branch also raises its log to Error — no configuration makes the
fetcher legitimately absent on a site node — and writes a best-effort
deployment/Error site event so the evidence outlives the boot log.
Central treatment: a "No self-heal" WARNING badge on the site tile, not a
failure. Config still reaches the node via LocalDb replication while it is up;
what it lost is recovery from a deploy that landed while it was down — degraded,
not offline. Only the explicit false is badged (badging null would light up the
whole fleet the moment central is upgraded ahead of the sites), and offline
sites are skipped, matching the replication-backlog badge.
Fail-before evidence: with the row-80 gate behaviourally reverted,
UnreplicatedSite_HealthReport_ReportsNullForBothLocalDbFields fails
"Expected: null / Actual: False" and 3 of the 8 new reporter unit tests fail.
Tests: HealthMonitoring 128, Host 518, CentralUI 1051, Communication 717,
Commons 715, SiteEventLogging 81 — all green.
|
||
|
Joseph Doherty
|
851b528ca3 |
docs(deployment): row 79 — OrbStack/virtiofs rig hazard + proven recovery runbook
Documents the host-level hazard behind row 69's LocalDb corruption, all live-verified 2026-08-15. Scope is the macOS docker rigs only — this is a property of the filesystem the rig's data files sit on, not a ScadaBridge defect and not something a production Linux deployment is exposed to. Every rig data file (site-localdb.db, auditlog.db, secrets) rides a relative bind mount out of the repo tree, which on macOS crosses virtiofs — and virtiofs does not give SQLite true fsync durability. `--force-recreate`, which deploy.sh uses, is exactly the abrupt mid-write kill that turns that into a torn file. Records both observed failure modes, and specifically how differently they present, which is the part that makes this hard to spot: site-a-b failed loudly while running (every sync call throwing, connected:false, backlog 892), while site-a-a was corrupt LATENTLY and only became fatal on the next upgrade, when a new build's boot-time re-registration read pages the old build never touched (SIGABRT crash-loop x12). A clean-looking node proves nothing about its file. Second mode is the VM idle-sleeping mid-operation — `vmgr ... msg=sleep` in ~/.orbstack/log/vmgr.log, then virtiofs `refresh_nodeid: race with new lookup` errors and a hung docker until `orb restart docker` (data intact, containers auto-restart). Written so a future session checks vmgr.log BEFORE investigating ScadaBridge, which is where ~20 minutes went last time. Recovery runbook is the one that actually worked: stop the pair together, quarantine site-localdb.db AND its -wal/-shm sidecars with a .corrupt-<date> suffix (never delete — forensics; and a stale WAL beside a fresh database is its own corruption), restart together, then VERIFY convergence rather than assuming it. Notes the precondition that this is a replicated pair's recovery — it leans on the startup reconcile plus CDC snapshot resync, so an unreplicated node has no peer to reseed from and needs a backup instead. Mitigation options tabulated with their real costs (named volumes = native ext4 but loses the host-side inspectability the debugging sessions lean on; disabling OrbStack idle-pause = a host setting that cannot be version-controlled and silently does not exist on a new machine; accept + runbook = current), so the status quo reads as a choice rather than an oversight. Docs only — no compose change, no host config change, rig untouched. |
||
|
Joseph Doherty
|
40944a0d04 |
feat(centralui): row 75 — Approve is caution amber, not destructive red
The Secured Writes page rendered Approve and Reject as IDENTICAL red buttons.
Row 28 fixed the labels but left the styling, and the styling was the worse
half: at the moment of a two-person-control decision the colour carried no
discriminating information at all, and the affirmative half of the control wore
the delete affordance.
Root cause is that `danger` was a two-state flag for a three-state concept, so a
consequential-but-not-destructive action had to choose between looking like a
delete and looking like the safe default. Adds the missing middle rung:
DialogSeverity { Normal -> btn-primary, Caution -> btn-warning,
Destructive -> btn-danger }
DECISION. Approve -> Caution (amber): approving executes a real write to live
plant equipment, so it is not a benign primary action, but it is not destroying
anything either. Reject KEEPS Destructive (red): it is terminal and irreversible
for the request — the Operator must resubmit — and holding it red is what keeps
the two opposite decisions visually distinct now that Approve is amber. Dropping
Reject to neutral was considered and rejected: it would invert the bias, making
declining look like the safe default. Colour is never the only signal — both
buttons carry their verb.
Only Destructive inherits the row-28 "Delete" label fallback; an unlabelled
Caution reads "Confirm", since a caution action is by definition not a delete —
otherwise row 28 would come back through the new door.
ADDITIVE OVERLOAD, deliberately. The boolean form stays the signature for all
~34 existing call sites, which are genuinely two-state, so nothing in src/
outside SecuredWrites.razor changed. Adding a fifth optional parameter to the
boolean form instead would have silently un-matched every existing four-argument
NSubstitute stub — the exact row-28 gotcha (null Task, caller NREs, no compile
error). The overload cannot: the only breakage was six hand-written IDialogService
fakes failing to compile, which is the loud failure mode. That gotcha did land
once, in SecuredWritesTests' own stub, and is now stubbed on both overloads with
a comment saying why.
DialogState's `bool Danger` became `DialogSeverity Severity` rather than gaining
a second field — it is read only by DialogHost, and one field cannot disagree
with itself.
Fail-before, both halves:
- Approve call site reverted to `danger: true` -> both new Approve pins fail.
- Caution remapped to btn-danger in DialogHost -> the amber styling pin fails.
Tests: DialogSeverityStylingTests renders the REAL DialogService behind a real
DialogHost (FailoverConfirmLabelTests' harness), so it pins what the user sees,
not what an argument was — all three severities, both label fallbacks, and the
boolean adapter. SecuredWritesTests pins that the page asks for Caution, with a
negative control that it did NOT also go through the boolean form (without which
the assertion would pass on a call site left at danger:true). Reject's red is
pinned too, so a later "make this page less alarming" pass cannot flatten both
to one colour.
No Playwright selectors needed updating — the suite has no Secured Writes
coverage, and no `.btn-danger` selector elsewhere targets this page.
Docs: Component-CentralUI.md gains the severity contract under Technology (next
to the row-28 label contract) plus the decision on the Secured Writes section.
CentralUI.Tests: 1055/1055 green.
|
||
|
Joseph Doherty
|
9d668861ad |
test(host): row 62 — pin ISiteEventLogger's Singleton lifetime in the site graph
Six SiteRuntime call sites resolve ISiteEventLogger straight off the root
IServiceProvider with no scope: AlarmActor (cached in a field for the actor's
lifetime), ScriptActor (x2), InstanceActor (x2), NativeAlarmActor,
DeploymentManagerActor, and Scripts/ScriptRunLauncher. All correct today, and
correct for exactly one reason — the registration is AddSingleton, so a root
resolve yields what a scope would.
That makes the lifetime a load-bearing invariant with no enforcement anywhere.
If it ever changes, all six silently become register row 45, and nothing in the
tree notices: ValidateOnBuild walks CONSTRUCTOR graphs and these are imperative
GetService calls in method bodies; ValidateScopes would fire, but at runtime on
a site node on whichever path logs an event first, not at boot and not in CI;
CaptiveDependencyGuard catches the AlarmActor field case by design but cannot
see the five per-call resolves at all. This pin is the tripwire, and its failure
message names the six call sites that must be fixed alongside any such change.
Asserts the REGISTRATION, not the call sites — the SiteRuntime actor files are
correct as written and are untouched here.
Two facts, not one, because the interface registration is a FACTORY
(AddSingleton<ISiteEventLogger>(sp => sp.GetRequiredService<SiteEventLogger>())):
a Singleton lifetime on the interface alone does not prove callers share an
instance, since downgrading the concrete SiteEventLogger would make that
singleton factory resolve a scoped service from the root.
Fail-before, both halves, by temporarily flipping the real registration:
- AddScoped<ISiteEventLogger> -> first pin FAILS, "Actual lifetime: Scoped",
with the full row-62 pointer in the message.
- AddScoped<SiteEventLogger> (interface left Singleton) -> the first pin stays
GREEN and only the second catches it. That is the evidence the second fact
is load-bearing rather than redundant.
Registration restored; both green.
Registration-only inspection — the provider is never built, so the pin costs
~30 ms and opens no SQLite file.
Host.Tests: 507/507 green.
|
||
|
Joseph Doherty
|
4ae57bdb6b |
docs(cli): row 76 — audit-config query JSON sample shows afterStateJson + bundleImportId
The `entries` array is a serialized `AuditLogEntry`, so both fields are always on the wire; the README sample showed neither, which read as if the payload were the seven columns the table projection happens to keep. Row 57 added that projection and the table section already names both omitted fields — the JSON sample above it was the stale half. Added both to the sample and documented their nullability, which is the part a script author actually needs: `afterStateJson` is the post-change snapshot embedded as a string and is null for deletes (no after-state), `bundleImportId` is the import session id when the change came from `transport import` and null for a direct change. Also grew the sample from one entry to two so it now mirrors the table-output sample directly below it row for row — the same 412 Template/Created and 413 ExternalSystem/Deleted pair — which is what makes the "the table drops these two fields" sentence checkable against the JSON above it. Docs only. |
||
|
Joseph Doherty
|
98c9458830 |
test(transport): row 74 — gauge asserts become delta-over-scoped-action, not absolute
BundleSessionObservabilityTests' two gauge facts asserted absolute values (Assert.Equal(0, baseline), Assert.Equal(2, ReadGauge())) against what is a single process-global provider slot — the same latent shape as the row-32 QueueDepthGaugeTests flake, correct only while this file is the slot's sole registrant. Converted to the delta-over-scoped-action pattern the row-66 rejection-counter facts in the same file already use: a new ReadGaugeDelta helper measures how far the instrument MOVED across an action driven by this test's own store, so an inherited non-zero baseline cancels out. Two assertions got stronger in the process. The post-clear check was Assert.Equal(0, ReadGauge()) — "the instrument reports zero", which any unregistered slot satisfies; it is now "opening more sessions on the detached store moves the gauge by nothing", which is the actual claim. And the compare-and-clear fact gained a negative control: the superseded store's opens must NOT reach the instrument, so a slot still pointing at oldStore can no longer satisfy the assertion by coincidence when both stores hold equal counts. Fail-before (temporary probe, not committed): with a foreign provider returning 7 registered before the service starts, the OLD body fails `Assert.Equal(0, baseline)` with `Expected: 0 / Actual: 7`; the NEW delta body passes the identical scenario. Honest residual documented on the helper: a gauge has one slot and last-writer-wins, so a registrant that clobbers it BETWEEN the two reads is unrecoverable read-side — that needs row-32's mutual exclusion. It cannot arise today (this is the only file in the assembly constructing a BundleSessionEvictionService, and test assemblies are separate processes); a second such file should bring the collection treatment with it. Transport.Tests: 180/180 green. |
||
|
Joseph Doherty
|
3dc38fb674 | docs(loadtest+register): close row 29 — 1-hour sustain run settles F1 as not-a-leak (working-set slope -28.89 MB/min, one gen-2 collect, 135M updates at 100.0% nominal); raw metrics JSON archived | ||
|
Joseph Doherty
|
e3ca77a234 | docs(register+decision): rows 69/70/78/79/80 — site-a LocalDb corruption recovered, auto-down deprecation drill-verified benign (explicit provider-class wins; re-drill on every Akka bump), replication-seeded configs start no actors (row-67 side door), OrbStack virtiofs hazard, non-null localDb health fields on unreplicated sites | ||
|
Joseph Doherty
|
caf9f45165 | docs(register): close rows 27, 28, 32, 33, 35, 40, 54-57, 61, 63, 66, 67 with evidence; add rows 71-77; record the row-42 seven-script audit result | ||
|
Joseph Doherty
|
744ff36a7b | merge: startup reconcile starts the healed InstanceActor (register row 67) — EnsureInstanceStartedCommand to the DM singleton, idempotent, disable-wins, Warning site event on self-heal | ||
|
Joseph Doherty
|
e8a90f18dc | merge: external-system retry policy end-to-end (register row 27) — MaxRetries/RetryDelay now travel artifact→gRPC→site schema→S&F enqueue, CLI --max-retries/--retry-delay-seconds, ArtifactDiff compares them | ||
|
Joseph Doherty
|
230c841d35 | merge: tag-resolution counts fixed on first subscribe (register row 55) — HandleSubscribeCompleted was the missing fourth UpdateTagResolution push site, so a perfectly healthy connection reported 0/0 forever | ||
|
Joseph Doherty
|
c26b52ad68 | merge: observability (register rows 33, 54, 56, 63, 66) — LocalDb backlog KPI history + sustained-threshold badge, honest stream-subscriber gauge rename + real data-connection gauges, central metrics port on the rig, ASPNETCORE_ENVIRONMENT on site containers, import-session rejection counter | ||
|
Joseph Doherty
|
d607011e5e | merge: small fixes (register rows 28, 35, 57) — confirm dialogs name their own action (9 mislabeled 'Delete' buttons fixed incl. secured-write Approve/Reject), DeploymentRecords composite (DeployedAt DESC, Id DESC) index, audit-config query CLI table projection | ||
|
Joseph Doherty
|
acc6209665 | merge: test-infra hardening (register rows 32, 40, 61) — queue-depth gauge collection isolation, wall-clock sleeps replaced with observable edges + negative controls, _injectedRepository test ctors deleted with empty guard allowlist | ||
|
Joseph Doherty
|
92fe5acca7 |
refactor(auditlog+sitecallaudit): delete the _injectedRepository test ctors — register row 61
AuditLogIngestActor and SiteCallAuditActor each exposed constructors taking a scoped
repository and caching it on a field for the actor's lifetime. Safe only because no
production call site picked those overloads — i.e. one call site away from re-introducing
the row-45 captive-dependency bug — which is why CaptiveDependencyGuard had to allowlist
both fields.
Preferred fix applied: the test fixtures fold onto the IServiceProvider overload with a
stub provider, and the constructors are gone.
Product deletions:
- AuditLogIngestActor: the (IAuditLogRepository, ILogger) ctor, the _injectedRepository
field and its branch in OnIngestAsync, and OnCachedTelemetryWithoutDualWriteAsync (the
"this ctor cannot dual-write" fallback handler that only that ctor installed).
_serviceProvider is now non-nullable and the null-forgiving operators are gone.
- SiteCallAuditActor: both test ctors (repo-only, and repo + reconciliation
collaborators), the _injectedRepository field and its four branches, and the private
SerializedRepository class. _backgroundTimersEnabled went with them: only the deleted
repo-only ctor ever set it false, so it was a constant and its two guards are removed.
The reconciliation tick is still gated — on the collaborators being resolvable, which
is how production reaches the same state.
Test fixtures (12 call sites): two small TestSupport helpers build the stub providers.
SiteCallAuditActor's production wiring resolves a FRESH repository per scope, so the
serializing decorator existed only to protect fixtures that share one DbContext-backed
instance across every scope — it moves into the test project as
SerializingSiteCallAuditRepository, which is where the hazard is actually created.
Fixtures that relied on it keep it. The relay test's ICentralAuditWriter now arrives via
the provider, exactly as production resolves it.
Behaviour is preserved on the paths under test: the deleted audit ctor passed
redactor:null / failureCounter:null, and a provider registering neither resolves both to
null, so the SafeDefaultAuditRedactor fallback and counter-free logging are unchanged. No
fixture on the folded sites sends IngestCachedTelemetryCommand, so swapping to the real
dual-write handler is inert. The SiteCallAudit purge timer now arms in fixtures that
previously had timers off, but every one of them uses default purge settings whose first
tick is 5 minutes out — nothing fires inside a test.
One reconciliation test was renamed and rewritten rather than deleted:
TestCtor_RepositoryOnly_DoesNotStartReconciliationTick became
NoReconciliationCollaboratorsRegistered_DoesNotStartReconciliationTick — the same
guarantee, expressed the way production actually reaches it.
Guard: the allowlist is now EMPTY. The staleness self-test (every entry must still match a
flagged field) is replaced by two stronger pins — Allowlist_IsEmpty asserts nothing is
exempt at all, and FormerlyAllowlistedActors_NowScanClean scans both actors with the
allowlist DISABLED, so the empty allowlist is evidence the fields are gone rather than
evidence the scan stopped looking.
Negative control: re-adding an ISiteCallAuditRepository field to SiteCallAuditActor fails
both FormerlyAllowlistedActors_NowScanClean and the real
Central_NoActorHoldsCaptiveScopedState scan.
Verification: solution builds clean. AuditLog.Tests 3/3 (383), SiteCallAudit.Tests 3/3
(66), Host.Tests 2/2 (505), IntegrationTests 2/2 (115), Communication.Tests 2/2 (717).
|
||
|
Joseph Doherty
|
7a7d345b89 |
test: replace wall-clock sleeps used as synchronization — register row 40
Six sleeps across four test files stood in for an observable edge. Each preceded an
ABSENCE assertion (or "settled" before one), so they failed toward false-pass rather than
flake: the assertion could not distinguish "the mechanism ran and correctly stayed quiet"
from "the mechanism had not run yet".
ScriptDeadlineAtEnqueueTests (two sleeps, the worst offender)
- :105 Thread.Sleep(2s) — now two explicit edges: the run must be observably QUEUED
(scheduler.QueueDepth >= 1, never checked before), then the wait polls until the 1 s
budget has elapsed, bailing early if the run leaves the queue, and asserts it is STILL
queued afterwards. The test now proves the design claim it was named for — queue wait
burns the run's budget — instead of assuming it.
- :128 Thread.Sleep(2s) + Assert.Equal(0, DetachedThreadCount) — replaced by a positive
control: a second script that genuinely wedges a worker, on the same scheduler, same
1 s timeout + 1 s grace, armed strictly later. Its stuck report is the edge; once it
lands, every watchdog armed at or before it has provably finished its grace delay. The
absence is then asserted per script name, and the detach counter is pinned at 1 (the
wedged run) rather than 0 — which a counter that never moves also satisfied.
DeploymentWarmThenGateTests (:117 plus two sibling Task.Delay(500) startup waits)
- The manager calls SetInstanceCounts unconditionally when its startup config load
completes, so a report counter on the test collector is the startup edge. The
empty-site zero is now the manager's own observation instead of an untouched field.
SiteAlarmLiveCacheServiceTests (:195, :216)
- Both sampled IsLive once after a fixed sleep. Now they poll continuously across three
linger windows on a new teardown observable (the mock client counts subscription
cancellations), so a stop at any instant inside the window is caught, and each closes
with a positive control proving that counter moves.
DataConnectionActorTests (:435)
- A Task.Delay(200) "settle" after an AwaitCondition on a connect counter. The counter
only proves ConnectAsync was CALLED; the actor is still Connecting until it processes
the piped result. Now waits for the Connected health publication that BecomeConnected
emits, so the subscribe under test provably runs against Connected rather than being
silently stashed. (The stash path keeps its own coverage in
WP6_ConnectingState_StashesSubscribeRequests.)
Negative controls (product broken in the working tree, old vs new test compared):
- Stuck-script watchdog disabled entirely: OLD test passed 2/2, NEW test failed. The
whole watchdog could be deleted and the old assertions were satisfied.
- Startup reporting a phantom instance count and taking longer than 500 ms: OLD passed
2/2, NEW failed (expected 0, actual 1).
- Linger cancellation disabled + the remaining-viewer guard dropped, so the stream is
torn down under a live viewer while IsLive keeps reporting true:
Resubscribe_Within_Linger OLD passed 2/2, NEW failed. (Last_Viewer_Leaving caught this
particular break in the old form too, via a later assertion — its strengthening is the
teardown observable and the positive control, not a false-pass fix.)
- DataConnectionActorTests :435 has no false-pass demo: the sleep guarded no assertion
there, and the change is determinism plus proving the claimed state.
Also fixes a latent race these timing changes exposed in
InstanceActorChildAttributeRaceTests: it resolved child actors single-shot immediately
after construction, but ResolveOne throws until the child's cell is published on the
parent AND the cell's Actor property stays null until the child's constructor has run on
its own mailbox thread. Neither is ordered against the test thread, so it failed both ways
under full-suite load (~1 run in 6 once the sleeps above stopped padding the schedule;
14/14 green on the unmodified tree, so it was latent, not new). Resolution now retries to
a bounded deadline; the assertion is unchanged.
Verification: SiteRuntime.Tests 8/8 green (605 tests), Communication.Tests 3/3 (717),
DataConnectionLayer.Tests 3/3 (319). Test-only change — no src/ modifications.
|
||
|
Joseph Doherty
|
b2cab59cb9 |
feat(cli): compact table projection for audit-config query (register row 57)
The command passed no `tableProjector`, so `--format table` handed the renderer
an `AuditLogQueryResult` OBJECT. That takes the generic Property/Value branch,
which printed the entire `entries` array as raw JSON inside a single cell. JSON
output was and remains correct, and is the primary format for this command.
Adds `AuditConfigTableProjection`, mirroring `TemplateTableProjection`:
string->string over the raw body, applied only on the table path, returning the
input verbatim when it is not JSON or not a recognised shape so the renderer's
own fallbacks still apply. It unwraps the envelope to a row array — id,
timestamp, user, action, entityType, entityName, entityId — and drops
`afterStateJson`, the full post-change entity snapshot, which is the audit
analogue of template's fat child arrays: one per row fills a terminal.
`bundleImportId` is dropped as mostly-null noise.
`totalCount` would be lost by a plain unwrap, so a truncated page gains a single
trailing row with a `note` cell ("showing 50 of 137 — use --page / --page-size
for the rest"). When the page IS the whole result set the column is not emitted
at all, so a small query's table stays exactly as narrow as its data, and the
note row carries no `id` so it cannot be mistaken for an entry.
A `--detail` flag skips the projection and renders the raw payload, matching
`template list` / `template get` — that plus `--format json` is how to reach
`afterStateJson`. A bare array root is also accepted, so the projection does not
regress if the payload is ever unwrapped upstream or the deprecated `audit-log`
alias meets an older server.
Tests build their fixtures by serialising the REAL AuditLogQueryResult /
AuditLogEntry types, so renaming a server property fails the test instead of
silently blanking a column. CLI README + Component-CLI.md document the table
shape, the omitted fields, and --detail.
|
||
|
Joseph Doherty
|
be29bf471e |
perf(configdb): index DeploymentRecords on the deployment-list sort key (register row 35)
The deployment list orders `DeployedAt DESC, Id DESC` and joins `Instance` to make SiteId filterable, but the only DeployedAt index was single-column and ascending, so the server sorted the filtered set on every page request. Adds `IX_DeploymentRecords_DeployedAt_Id (DeployedAt DESC, Id DESC)` — the exact sort key, both columns descending, so a forward scan feeds the paged Skip/Take directly. Id is in the key as the deterministic tie-break: a bulk site deploy stamps many rows in the same DeployedAt instant, and without it a row can repeat or vanish across page boundaries. Three reads share the key (QueryDeploymentListPageAsync, QueryDeploymentSummariesAsync, and the single-row GetCurrentDeploymentStatusAsync). DROPS the old `IX_DeploymentRecords_DeployedAt` rather than keeping both. It is strictly redundant, not merely overlapping: DeployedAt leads both, so every predicate it served the composite serves too (direction does not affect seekability — SQL Server scans either way), and the leaf rows are the same width, because Id is the clustered PK and was therefore already in the old nonclustered index's leaf as the row locator. All that changes is Id becoming a declared, ordered key column. Keeping it would maintain a second index on every deployment insert and status transition for no read benefit. Honest caveat: because the clustering key is implicitly ordered within a nonclustered index, the optimizer may already have been able to serve this ordering by scanning the old index backward. The explicit composite makes it deterministic and self-documenting rather than dependent on that inference, and costs nothing to declare. Migration 20260815165452_AddDeploymentRecordListSortIndex (scaffolded with a real build, non-empty, snapshot updated) plus the hand-written production script under docs/plans/sql/ following the AddAuditLogAndNotificationCoveringIndexes precedent. SystemArtifactDeploymentRecords has its own separate DeployedAt index and is deliberately untouched. |
||
|
Joseph Doherty
|
0db253b55f |
fix(centralui): confirm dialogs name their own action instead of always saying "Delete" (register row 28)
The Health dashboard's "Trigger failover" confirmation offered a red button
labelled *Delete*. The copy was right; the button was not. `DialogHost` derived
the confirm label solely from `danger`, so `danger: true` meant the verb was
literally "Delete" for every caller — and no caller could say otherwise, because
`IDialogService.ConfirmAsync` had no label parameter.
`danger` now selects styling only; a new optional `confirmLabel` names the action
and wins over the fallback. The kind/danger fallback is deliberately RETAINED
("Save" for a prompt, "Delete" for a bare danger confirm, "Confirm" otherwise):
around 20 call sites are genuine deletes where it is correct, and the Playwright
suites click the literal "Delete". Requiring the label everywhere would have
churned those 20 sites for no behaviour change, with the miss-detection resting
on Playwright runs that need a live rig.
Audited all 34 confirm call sites; 9 read "Delete" for something that is not a
delete and are relabelled:
Fail over CentralFailoverControl (central pair, site pair)
Approve SecuredWrites — approve (this one WRITES TO A DEVICE)
Reject SecuredWrites — reject
Disable Topology — disable instance
Discard SiteCallsReport, NotificationReport, ParkedMessages (bulk + single)
The remaining 25 are correct as they stand: 18 genuine deletes plus 7 non-danger
confirms ("Revert to base", the three Retry paths) whose button reads "Confirm".
Tests: FailoverConfirmLabelTests drives the real DialogService behind a real
DialogHost — a substitute would pin the argument but not what the operator reads
— covering both branches, that the button keeps btn-danger, and that an
unlabelled danger confirm still falls back to "Delete". Note its click is
deliberately not awaited: with a real dialog the handler parks on ConfirmAsync
until answered, so awaiting deadlocks. Existing IDialogService fakes and
NSubstitute matchers gain the 4th parameter (an optional param is baked into the
call site, so a 3-arg Arg.Any stub silently stops matching a labelled call).
|
||
|
Joseph Doherty
|
8da60f57ac |
feat(health): KPI history + sustained-backlog badge for LocalDb replication (row 33)
LocalDbOplogBacklog was reported and Prometheus-exported with nothing consuming it: not sampled into KPI history, so a purge-burst spike could not be reviewed after the fact, and no threshold treatment anywhere. Both halves shipped. KPI SAMPLING. SiteHealthKpiSampleSource now emits localDbOplogBacklog and localDbReplicationConnected (0/1), and the backlog is charted on the Health dashboard's per-site trend panel. Charting is the point: a point-in-time tile can never answer 'did that spike drain?', which is the only thing separating an expected purge burst from a stalled peer. Both are CONDITIONALLY emitted rather than coerced with ?? 0 like the auditBacklogPending metric beside them. Both health-report fields are nullable and null means 'no reading' — replication not configured (rig site-b/site-c) or a failed poll — never zero. A fabricated 0 would render a pair that cannot read its own oplog, or one deliberately unreplicated, as perfectly healthy once a minute forever, burying the real series. So a site emits 12 metrics when unreplicated and 14 when replicated, and a GAP in these two series truthfully means 'not replicated / not reporting'. Note false and null differ for the connected flag: a configured link that is DOWN samples as 0; no link samples as nothing. Both fold as Gauge (summing an oplog depth, or a 0/1 flag, per hour is meaningless). THRESHOLD SEMANTICS — sustained, not instantaneous. This is the design, not a refinement. The site_events retention purge is CDC-captured like any other write, so the backlog jumps by the deleted batch and drains as the peer acks it; a bare 'backlog > threshold' badge would fire on every replicated site every day and be ignored within a week. Healthy is defined by the backlog RETURNING to ~0, which only a dwell can express. CentralHealthAggregator holds LocalDbBacklogAboveSince — the instant the backlog first rose above LocalDbBacklogThreshold (default 1000) — and the badge appears only after LocalDbBacklogSustainedFor (default 15 min). A report at or below the threshold clears the anchor; one above leaves the ORIGINAL instant intact, so the window is sustained rather than sliding. The null case is deliberately a third branch: a null backlog leaves the anchor UNCHANGED rather than clearing it. Null is evidence neither of a drain nor of a backlog, so a node going blind mid-climb must not silently reset its own dwell, and an unreplicated site (null forever) never accumulates an anchor and can never be badged. Validation rejects a non-positive threshold (0 would badge every replicated site permanently, since an idle backlog already sits at it) and a dwell shorter than one ReportInterval (satisfiable by a single sample, which collapses the check back into the bare threshold it replaces). DOC CORRECTION worth flagging: this row's premise was 'mirror the SiteAuditBacklog configurable threshold badge'. That badge does not exist — Component-HealthMonitoring.md described it in two places but no option, no comparison and no markup were ever implemented. The two stale claims are corrected here rather than left to send the next reader looking for it; the LocalDb badge is built fresh on the Metrics-stale badge's pattern, which is a real configurable-threshold badge. Tests: HealthMonitoring 115 (9 new aggregator tests incl. purge-burst-drains, unreplicated-never-anchors, null-mid-climb, exact-threshold, stale-report; 5 new validator tests; 4 new sampler tests incl. the null-semantics and false-vs-null cases); CentralUI 1042 (5 new badge/chart tests incl. the purge-burst negative control); Commons Kpi 93; KpiHistory 54. |
||
|
Joseph Doherty
|
41a5ecf14a |
feat(external-systems): deploy per-system retry policy to sites + CLI/management surface (register row 27)
An external system's MaxRetries/RetryDelay existed on the central entity but never reached a site and had no management surface, so every ExternalSystem.CachedCall buffered with the S&F engine default (DefaultMaxRetries 50 x DefaultRetryInterval 30s ~= 25 min to park) whatever central had configured. The sibling DatabaseConnectionArtifact had always carried its equivalents. The consumption end was already wired: ExternalSystemClient.CachedCallAsync already read system.MaxRetries/RetryDelay and passed them to EnqueueAsync with the 0-as-unset convention. Only the transport and persistence were missing. Commons - ExternalSystemArtifact gains MaxRetries/RetryDelay as optional positional params (0 / TimeSpan.Zero = unset), matching DatabaseConnectionArtifact rather than going nullable, so it maps 1:1 onto the entity and the proto3 scalars. - Create/UpdateExternalSystemCommand gain nullable MaxRetries/RetryDelay, following the existing TimeoutSeconds "omit to preserve" convention. Both additive. Central - ManagementActor create maps both; update preserves-if-null. - ArtifactDeploymentService projects them onto the artifact. Wire - site_command.proto ExternalSystemArtifactDto gains max_retries=7 / retry_delay=8 (google.protobuf.Duration), mirroring DatabaseConnectionArtifactDto. Additive: a pre-existing site decodes them as 0/absent, which IS the unset value, so old behaviour is preserved. Vendored C# regenerated via docker/regen-proto.sh sitecommand; csproj Protobuf item re-commented, no message types added or removed. Site - external_systems gains max_retries / retry_delay_ms via AddColumnIfMissing, DEFAULT 0 = unset. Storage upsert, repository SELECT/mapping (new ordinals 6/7 appended so existing ones are untouched), apply path, and the legacy migrator's explicit column list all carry them. Replicated-table decision: external_systems IS in SiteLocalDbSetup.ReplicatedTables, so this was checked against the AckTime/native_alarm_state precedent. Real columns are correct here, not a JSON bag: the table has no general-purpose config column (auth_configuration and method_definitions are both semantically specific), timeout_seconds already set the additive-column precedent on this exact table, and sibling database_connections stores the same two values as plain columns. Verified in LocalDb source that RegisterReplicated re-reads PRAGMA table_info every boot and its install script is DROP-then-CREATE, so capture triggers rebuild over the new column set automatically, and SiteStorageSchema.Apply runs before registration on the same boot. The only cost is the ReplicatedTable.ComputeDigest change, which the sync handshake compares fail-closed - a mixed-version pair refuses to sync loudly instead of diverging silently. Both-nodes-together is already the standing site-pair rule, so no new operational constraint; recorded in topology-guide.md. Also fixed: ArtifactDiff.CompareExternalSystem never compared MaxRetries/RetryDelay, so a bundle import that changed a system's retry budget previewed as "Identical" - harmless while the values were inert, a live behaviour change now. No EF migration: the central ExternalSystemDefinitions columns already exist (InitialSchema). Central UI already had both form fields. Tests: site storage round-trip + unset-default, site apply path, central artifact projection, proto round-trip (via the shared sample), management create/preserve, CLI option parse + alias, and diff reporting. Fail-before verified on the two core tests (expected 7 got 0 on the read path; expected 9 got 0 on the apply path). Docs: Component-ExternalSystemGateway, Component-StoreAndForward, Component-CLI, components/StoreAndForward, components/SiteRuntime, deployment/topology-guide, CLI README (which was also missing --timeout-seconds entirely). |
||
|
Joseph Doherty
|
0d2d6de6c6 |
chore(rig): set ASPNETCORE_ENVIRONMENT on the site containers (register row 63)
The central containers have always set it; the six site containers never did, so the Development-only DI scope validation from register row 50 (ServiceProviderValidation.Configure — ValidateScopes/ValidateOnBuild) was dead on exactly the half of the topology that has six of the eight nodes. Program.cs even carried a comment saying the site branch 'is the one that actually gains coverage' while the rig gave it none; that comment is corrected here too. Now that the site graph validates clean this buys live coverage: a captive dependency or an unconstructible site-only descriptor fails the container at boot instead of surfacing later as a mid-run resolve error. Applied to all six docker/ site containers and both docker-env2/ site containers, keeping the two rigs consistent. Dev/rig only — never production. FILE EDITS ONLY: no docker command was run, and deploy.sh was not invoked. Both compose files re-parsed with yaml.safe_load; all 8 + 4 services confirmed to carry the expected env. |
||
|
Joseph Doherty
|
103f2f1931 |
feat(host+rig): give central a dedicated Prometheus scrape port (register row 56)
The row read 'central nodes expose no Prometheus endpoint'. That is not quite
what was wrong, and the difference matters. Central already maps /metrics
(Program.cs central branch) and telemetry is registered for both roles through
the shared BindSharedOptions, so the endpoint rides endpoint routing and has
always been served on central's web port (:5000 on the rig, anonymous — there
is no FallbackPolicy). What central lacked was the site branch's dedicated
MetricsPort, which is the port the established live-scrape recipe probes:
docker exec <node> bash -c 'exec 3<>/dev/tcp/localhost/8084 ...'
So a probe of central on 8084 failed and central-only series (KPI/outbox
counters, the bundle-import session gauge + its new rejection counter,
alarm-cache gauges) read as unscrapeable while they were in fact being
exported on a different port.
Central now binds a dedicated HTTP/1.1 listener on ScadaBridge:Node:MetricsPort,
so one probe recipe covers all eight rig nodes. HTTP/1.1-capable because a
standard Prometheus scraper cannot negotiate h2c, which is why this cannot
share the gRPC port.
Read as a PRESENCE check, not GetValue's defaulted read. NodeOptions defaults
MetricsPort to 8084, so a defaulted read would make every existing central node
start binding a new port on upgrade — and a port already in use is a hard boot
failure, not a degraded one. Central gains the listener only where an operator
asked for it; site nodes are unchanged and still bind theirs unconditionally.
The bind is also skipped when the port would collide with the gRPC port or an
ASPNETCORE_URLS port, since Kestrel throws on a duplicate ListenAnyIP and
/metrics is reachable on those ports anyway.
Config only — no host port mapping added, because the probe runs inside the
container. Applied to both docker/ centrals and both docker-env2/ centrals.
FILE EDITS ONLY: no docker command was run, and deploy.sh was not invoked.
|
||
|
Joseph Doherty
|
b5f120c370 |
feat(observability): honest stream-subscriber name + real data-connection gauges (row 54)
scadabridge_site_connection_up never counted data connections. It counts open central->site gRPC subscriber streams (Debug View + the site-wide alarm feed), so it correctly reads 0 on a healthy site nobody is watching — and the name invited reading it as device health. That misreading has already cost a live debugging session: register row 48's 'connection_up is 0 on all six site nodes' was healthy steady state, not the fault it was diagnosed as. Two halves, per the row: RENAME. scadabridge.site.connection.up -> scadabridge.site.stream.subscribers.active (helpers SiteConnectionOpened/Closed -> SiteStreamSubscriberOpened/Closed), and the instrument gains the unit:"1" the other gauges already carried. Every reference updated: the gRPC server, both test suites, Component-Communication.md, components/Commons.md, docker/README.md and docker/seed-live-probe.sh. A test now pins the new name AND asserts the old one is gone, so it cannot creep back. NEW. scadabridge.site.data_connections.connected / .total — the first exported data-connection signal (the state existed on the health report and in the CLI, but never as a metric). connected < total is the alert condition; neither number alone separates 'a device is down' from 'nothing is configured', which is why the denominator ships with the numerator. Sourcing is deliberate on two counts. It is fed by the DCL at its four state transitions rather than derived from the health report, so the metric survives a dead report pipeline — the exact failure the 'metrics stale' flag exists to catch, and a derived gauge would go blind at the same moment. And it uses a static registry reached through ScadaBridgeTelemetry (the SiteConnectionOpened precedent) rather than a DI-injected holder: the DCL actors already take ISiteHealthCollector through their constructors, and threading a second dependency through both would ripple into every test that builds them. It also keeps SiteHealthCollector untouched, which matters right now — another agent is concurrently editing that file for the tag-resolution path. Removal is wired too: an undeployed connection leaves the registry, so it stops counting toward the total instead of latching connected < total on forever. Both gauges read 0 on the standby (connections open on the active node only) — healthy, documented, and called out in the docs so it does not become the next site_connection_up. No ObservedMeters allowlist change: all three instruments ride the existing ZB.MOM.WW.ScadaBridge meter. (An unlisted meter exports nothing, silently.) Tests: Commons 711 passed (9 new, delta-based against a baseline with unique per-test connection names, so they do not inherit the register row 32 QueueDepthGaugeTests static-state flake); Communication 717; DCL 319. |
||
|
Joseph Doherty
|
abf864b4e5 |
docs(siteruntime): record reconcile's runtime heal semantics (register row 67)
Component-SiteRuntime.md gains a Startup Behavior note explaining why storing a config started nothing (the reconcile pass fires after the boot-time SQLite load, and Instance Actors are created only by that load or an explicit deploy/enable) and what the EnsureInstanceStartedCommand path now guarantees: singleton-proxy routing, idempotence, durable-row authority over enabled/disabled, deferral to in-flight deploys, quiet no-op on an unreplicated peer's heal, and the Warning log + `deployment` site event that make the heal visible. The command is also listed under Instance Lifecycle Commands, flagged site-internal and reply-less so it is not mistaken for a central-sent command. docs/components/SiteRuntime.md gets the matching implementation-level note beside the surviving-reconcile paragraph in Standby replication. |
||
|
Joseph Doherty
|
5da27e05c7 |
fix(dcl): push tag-resolution counts on first subscribe (register row 55)
A site health report showed tagResolutionCounts 0/0 for a connection whose dataConnectionTagQuality on the SAME report read good:2 — reproduced live on the docker rig against site-a's rig-probe-1 instance (2 Good OPC UA tags on "OPC PLC Simulator"), on the ACTIVE node's own report. Not a standby-shadowing or keying/removal problem, and not a serialization problem: both dictionaries live on one collector instance on one node, and the CentralControlDtoMapper round-trip is correct in both directions. The actor's own derived counts (TotalSubscribedTagCount / ResolvedTagCount) were right the whole time — GetHealthReport replied 2/2. Root cause: HandleSubscribeCompleted — the path that registers tags on a first, healthy subscribe — mutated _instancesByTag and _subscriptionIds but never pushed to ISiteHealthCollector. The only pushes were BecomeConnected's (fires before any instance subscribes, so its 0/0 is legitimate), the batch apply (reconnect re-subscribe / resolution probe) and unsubscribe (teardown). A connection whose tags all resolve first time reaches none of those, and ScheduleTagResolutionRetry cancels the retry timer outright when nothing is unresolved — so the connect-time 0/0 was never superseded and stood forever. The blind spot was therefore worst on a perfectly healthy connection, which is exactly when the "device still booting / tag path unresolved" diagnostic should read clean rather than empty. Any reconnect masked it (the batch path pushes), which is why it presented only on a clean first deploy. Fix: push the derived counts at the end of the first-subscribe apply, mirroring the existing push site in HandleBatchSubscribeCompleted. No semantic change to the null/no-data convention — the map entry already existed, its values were simply stale zeros. Tests: fail-before regression test pins the exact mechanism (NSubstitute records a single UpdateTagResolution(name, 0, 0) pre-fix while the actor reports 2/2). DCL 320, HealthMonitoring 97, SiteRuntime 605, Communication 717 all green; slnx builds clean. Docs: Component-DataConnectionLayer.md said the counts were "derived at report time", which implies a pull that cannot go stale and papered over this bug. Corrected to state they are pushed, name the four push sites, and record why a healthy connection was the worst case. |
||
|
Joseph Doherty
|
65b19516c8 |
test(storeandforward): isolate the process-global queue-depth gauge — register row 32
QueueDepthGaugeTests failed intermittently whenever a sibling test class started a StoreAndForwardService concurrently. `scadabridge.store_and_forward.queue.depth` is an ObservableGauge on ScadaBridgeTelemetry's static meter reading ONE process-global provider slot; every StartAsync writes it, last registrant wins. A concurrent StartAsync clobbered the gauge mid-assertion and the test read the sibling's depth (observed: expected 0, actual 6 — 2 runs in 5 with parallel collections enabled). The global slot cannot be swapped for a per-test meter: three of the six facts assert the slot-ownership semantics themselves (compare-and-clear identity, stop/restart re-seed), so the slot IS their subject. The correct isolation is mutual exclusion — QueueDepthGaugeTests, StoreAndForwardServiceTests and CachedCallAttemptEmissionTests (the three classes that call StartAsync) now share the QueueDepthGaugeCollection, which xUnit runs serially; the other eight classes stay parallel. With real isolation in place the assembly-wide `parallelizeTestCollections: false` blanket switch is no longer needed and is flipped back on, so the isolation is actually exercised rather than papered over. QueueDepthGaugeCollectionGuardTests is a staleness self-test: it scans this project's sources (anchored by [CallerFilePath], not the output dir) for files that both construct and start a service, and fails if one omits the collection attribute — so a new test class cannot silently reintroduce the flake. Negative-controlled: dropping the attribute from StoreAndForwardServiceTests makes the guard fail with the offending file name, and the original gauge flake reappears in the same run. Verification: 8 consecutive full-suite runs green with parallel collections ON (135 tests), plus 5 more after the negative control was reverted. Test-only change; no src/ involvement. |
||
|
Joseph Doherty
|
482165cbac |
fix(siteruntime): startup reconcile starts the healed InstanceActor (register row 67)
SiteReconciliationActor's node-STARTUP fetch healed the config FILE but never the RUNTIME. Instance Actors are created from exactly two paths -- the Deployment Manager's boot-time SQLite load and an explicit deploy/enable command -- and the reconcile pass runs AFTER that boot load has already read storage. So a config reconcile restored started no actor: an enabled, successfully-deployed instance whose config was missing at boot (lost volume, first boot after a restore, rehomed data dir) stayed dead until the NEXT restart, whose load finally picked it up. Proven live on site-a 2026-08-15: "Reconcile: fetched + stored config" with no "InstanceActor started" after it, and a debug snapshot answering instanceNotFound. The pass now raises a fire-and-forget EnsureInstanceStartedCommand (new Commons Deployment message) for every ENABLED instance it healed, routed through the deployment-manager singleton PROXY so Instance Actors stay under the singleton no matter which node's reconcile found the gap. The handler is deliberately advisory: - idempotent -- no-op when the actor is already running, which both nodes' reconcile actors legitimately trigger for the same instance; - enabled-state-aware -- it re-reads the durable row, which is the authority on both the config body and enabled/disabled, so a disable landing after the fetch still wins and the instance stays stopped; - it defers to any in-flight deploy/redeploy/warm for the instance, which keeps the deploy gate's ordering guarantees and the all-or-nothing-per-instance rule intact -- this never applies a config, it only starts one already persisted; - a missing row is a quiet no-op, the normal case on an unreplicated site whose peer node healed its own file. The heal is no longer silent: a successful reconcile start emits a Warning log line and an operational `deployment` site event, because reaching it means the node booted without a config for an instance that should have been running. |
||
|
Joseph Doherty
|
90ce099928 |
feat(transport): counter for import-session cap rejections (register row 66)
Row 53 shipped the scadabridge.central.transport.import_sessions.open gauge
and a Warning log on a cap hit, but a log line is not something an operator
can alert on. Adds the companion counter
scadabridge.central.transport.import_sessions.rejected
on the existing ZB.MOM.WW.ScadaBridge meter, so no ObservedMeters allowlist
change is needed (an unlisted meter exports nothing, silently).
The emit point is deliberately narrow. BundleSessionStore.Open tests the cap
TWICE — once on entry and again after EvictExpired() — and only the second
test is a rejection: a store full of merely expired sessions reclaims a slot
and admits the caller. Counting the first would make the series fire
routinely on any node whose sweep had not yet run, turning a page-worthy
signal into background noise. Re-Opening an already-open session id skips
the cap block entirely and is likewise not counted.
The two instruments are diagnostic as a pair: rejections rising while the
gauge oscillates below the cap is genuine concurrency (raise the cap);
rejections rising while the gauge sits pinned at the cap is a session leak
(register row 43's signature), where raising the cap only defers the problem.
Tests assert a delta over a scoped action rather than an absolute value, so
they do not inherit the register row 32 static-state flake that makes
QueueDepthGaugeTests fail only under the full concurrent suite. Negative
controls cover under-cap, expired-reclaim, and duplicate-session-id.
Tests: 11 passed in BundleSessionObservabilityTests (6 existing + 5 new).
|
||
|
Joseph Doherty
|
ef876b38c5 | chore(docker+register): refuse worktree deploys (relative bind mounts rehome rig data — register row 68); record row 67 (startup reconcile stores config but starts no InstanceActor) + row-48 postscript | ||
|
Joseph Doherty
|
002299c400 | docs(register): close rows 46, 48-53 with evidence; add rows 54-66 from the fix wave's discoveries | ||
|
Joseph Doherty
|
cde4af77fd | merge: audit-config query fix + rig live-probe seed (register rows 46, 48) — ValueTuple serialized as {} fixed with AuditLogQueryResult record + ITuple guard; docker/seed-live-probe.sh | ||
|
Joseph Doherty
|
4785f3cbef | merge: transport hardening (register rows 51-53) — BundleLockedException curated to Commons/MapFault, fleet-wide MS SQL unlock-throttle window, import-session gauge + cap Warning | ||
|
Joseph Doherty
|
1be08e96cc | merge: code-review scoped-lifetime sweep (register row 49) — no live bug; NotificationOutbox-004 resolution note recorded | ||
|
Joseph Doherty
|
a404854212 | merge: captive-dependency guard (register row 50) — scope validation in Development + actor field scan; fixes two Site-role unconstructible registrations | ||
|
Joseph Doherty
|
73f518d6a6 |
chore(transport): delete the dead BundleUnlockRateLimitedException
Superseded by BundleUnlockThrottledException when register row 44 wired the limiter live and moved the typed exception to Commons so ManagementService's MapFault could curate it. The original type has been unreferenced since — never thrown, never caught, only its own definition — and with row 51 moving BundleLockedException into the same Commons namespace there are now three similarly-named unlock exceptions, one of which does nothing. A future maintainer catching the dead one would silently get no coverage. Solution builds clean with it gone (zero references). Transport 173 passed. |
||
|
Joseph Doherty
|
00a804e6d9 |
guard(di): captive-dependency tripwires — scope validation + an actor field scan
Register row 50. Row 45 (fixed
|
||
|
Joseph Doherty
|
677263af57 |
feat(transport): fleet-wide bundle-unlock throttle window (register row 52)
The per-IP unlock throttle's counters were a process-local ConcurrentDictionary on each central node, so the effective fleet cap was N x MaxUnlockAttemptsPerIpPerHour per client (failing over to the other node handed the client a fresh budget) and a node restart cleared the window outright. The window now lives in the central MS SQL BundleUnlockAttempt table — the HA store both central nodes already share, so no new infrastructure, no new port, no consensus protocol: - Commons: BundleUnlockAttempt entity + IBundleUnlockAttemptRepository. - ConfigurationDatabase: entity config (one index, IX_BundleUnlockAttempt_Client_Attempted, serving both the windowed count and the prune), repository (AsNoTracking count, ExecuteDeleteAsync prune), DbSet, DI registration, migration AddBundleUnlockAttemptTable + the hand-written idempotent production script under docs/plans/sql/. - Transport: IBundleUnlockAttemptWindow seam + SqlBundleUnlockAttemptWindow (singleton; resolves the scoped repository from its own scope per call, like the central purge singletons). BundleUnlockRateLimiter keeps the policy and gains TryRegisterAttemptAsync; BundleImporter.LoadAsync calls it. Behaviour preserved from row 44: locked bundles spend no hourly budget (the lockout check still runs first), throttle denials burn no per-bundle strike and are NOT recorded so they cannot roll the window forward, unattributable clients share the stricter <unattributed> bucket, and the budget counts attempts rather than failures. Config keys and their semantics are unchanged, so the rig's 500 override stays valid. Three deliberate trades, documented in both Transport docs: - FAILS OPEN. A store error logs a Warning naming the client and cap, and permits the attempt. This is a best-effort rate cap over an already authenticated, Administrator-gated surface — the availability of legitimate imports outranks the cap, and a DB blip must not make the import wizard unusable. Falling back to the process-local window was considered and rejected: it would still block a legitimate operator's 11th import. - Approximate. Count-then-insert is not atomic across nodes, so simultaneous attempts can overshoot by the number in flight — bounded, self-correcting within the window, and not worth provider-specific raw SQL. - Pruned opportunistically on the unlock path (CAS-claimed at most every 15 min per process, bounded to 1000 rows, retaining 2x the window, best-effort try/catch) rather than by a new background service — Transport owns no central scheduler. Same shape as DeploymentService's terminal-record sweep. Tests: Transport.IntegrationTests 116 passed (+10 — two limiter instances over one store enforcing a single combined window, restart durability, denials burning no budget, sliding release, bucket isolation, store-failure fail-open, caller-cancellation not swallowed, no-shared-window fallback, prune and its negative control); ConfigurationDatabase 395 passed (+5). |
||
|
Joseph Doherty
|
b5e6821caa |
chore(docker): seed script for a deployable live-data probe instance on the rig
Deferred-work register row 48. The rig had no deployable instance — all seven soak-* rows fail pre-deployment validation (their bound data connections no longer exist on the sites) — so debug snapshot returned instanceNotFound, no gRPC site stream was ever opened, and the R2 batching histogram scadabridge.site.stream.batch_size had nothing to record. Any live probe of the data or streaming path was unverifiable. seed-live-probe.sh rebuilds the minimum working set via the CLI only (no DB edits): RigProbe template (Spike <- ns=3;s=SpikeData, RandomInt <- ns=3;s=RandomSignedInt32, both ~1 Hz; Heartbeat static attribute + a trust-clean 5s interval script) and a deployed rig-probe-1 on site-a against connection 1. Records the two traps that cost time here: - The custom tags in infra/opcua/nodes.json (Motor.*, Tank.*, Valve.*, TestChildObject.*) are DECLARED but not simulated by opc-plc — they read 0/false/ epoch forever, so binding to them yields a Connected, Good-quality connection with zero event traffic. Only the built-in nodes move. - scadabridge_site_connection_up counts open central->site gRPC SUBSCRIBER STREAMS, not OPC UA data connections. It reads 0 on a healthy site with no subscriber, which is how row 48 read it as a data-connection fault. Data-connection health lives in the health report's dataConnectionEndpoints / dataConnectionTagQuality. |
||
|
Joseph Doherty
|
75520beece |
docs(code-reviews): record the missing NotificationOutbox-004 resolution note
Deferred register row 49 (scoped-lifetime sweep). NotificationOutbox-004 was flipped to Status: Resolved but its Resolution body still read _Unresolved._, so the file claimed an open DI-scope-lifetime hazard that the code had already closed. Re-verified against current code: EmitAttemptAuditAsync / EmitTerminalAuditAsync now await _auditWriter.WriteAsync inside the existing try/catch (NotificationOutboxActor.cs:731, :785) — the preferred remedy from the finding's own Recommendation — so the audit task cannot outlive the per-sweep DI scope, the catch is reachable for writer faults, and the misleading 'writer never throws' XML-doc is gone. Documentation only; no code touched. Solution build clean (0 warnings, 0 errors). |
||
|
Joseph Doherty
|
372ea4df1b |
feat(transport): observability for the import-session cap (register row 53)
Nothing counted open import sessions and nothing logged a rejection at MaxConcurrentImportSessions (default 8), so the register-row-43 session leak could only be inferred from rotating test failures. - Gauge scadabridge.central.transport.import_sessions.open on the existing ZB.MOM.WW.ScadaBridge meter — already in SiteServiceRegistration.ObservedMeters (the ZbTelemetryOptions.Meters allowlist), so no telemetry config change is needed and the series is not silently dropped. Provider-backed, mirroring the StoreAndForward queue-depth gauge: registered by BundleSessionEvictionService .StartAsync (Transport's only lifecycle seam) and identity-checked-cleared on StopAsync so a late stop cannot clobber a newer registrant. - IBundleSessionStore.OpenSessionCount counts only UNEXPIRED sessions. The raw dictionary count would report the node as pinned at the cap for up to a one-minute sweep interval after a burst had drained — the exact false positive the instrument exists to rule out. - BundleSessionStore.Open logs Warning with open count, cap and TTL when it rejects. Fires only on a real cap hit: a store full of expired sessions is reclaimed first and logs nothing. - Docs: docs/components/Transport.md + docs/requirements/Component-Transport.md. Tests: Transport 173 passed (+6 new — Warning content, two negative controls, unexpired-only counting, gauge register/clear, no-clobber-on-late-stop). |
||
|
Joseph Doherty
|
09108018f1 |
fix(management): audit-config query returned {} for every filter — project the repo ValueTuple into a named result record
Deferred-work register row 46. HandleQueryAuditLog returned ICentralUiRepository's
(IReadOnlyList<AuditLogEntry> Entries, int TotalCount) ValueTuple straight to
ManagementActor.SerializeResult. System.Text.Json writes properties only, and a
ValueTuple exposes Item1/Item2 as public FIELDS, so the whole payload serialized to
the literal "{}" — the CLI faithfully printed an empty object no matter how many
AuditLogEntries rows matched, with no error anywhere in the stack.
Fixed at the handler (the layer that leaks the tuple), not the CLI: new Commons record
AuditLogQueryResult(Entries, TotalCount), mirroring the SecuredWriteListResult shape
already used by the other paged management query.
Also guards the whole class of bug: SerializeResult now throws on any ITuple result,
so the next handler that returns a tuple fails loudly instead of silently emitting {}.
Tests (fail-before verified — the query test asserted exactly "{}"):
- QueryAuditLogCommand_ReturnsEntriesAndTotalCount
- SerializeResult_TupleResult_ThrowsInsteadOfEmittingEmptyObject
- SerializeResult_AuditLogQueryResult_EmitsEntriesAndTotalCount
Docs: Component-CLI.md + CLI README document the response shape and why it is a record.
|
||
|
Joseph Doherty
|
b449fe201a |
fix(transport): curate BundleLockedException on the management surface (register row 51)
ManagementService references Commons but not Transport, so MapFault could not see BundleLockedException and the per-bundle 3-strike lockout reached the CLI as "An internal error occurred (CorrelationId=...)" — the operator got a correlation id instead of the reason, and no hint that further attempts on that bundle would be refused. Applies the pattern register row 44 established for BundleUnlockThrottledException: - Relocate BundleLockedException from Transport/Import/ to Commons/Types/Transport/, beside BundleUnlockThrottledException. Both consumers (BundleImporter, CentralUI TransportImport) already carried the Commons.Types.Transport using, so no call-site edits were needed. - Add curated catch arms in ManagementActor.HandlePreviewBundle and HandleImportBundle that rethrow as ManagementCommandException, so the message survives MapFault's disclosure filter. - Mirror the row-44 throttle fault-mapping test for both handlers. - Document the relocation in docs/components/Transport.md and docs/requirements/Component-Transport.md. Tests: ManagementService 499 passed (+2 new), Transport 167 passed. |
||
|
Joseph Doherty
|
c6769ee95e | chore(docker): raise MaxUnlockAttemptsPerIpPerHour to 500 on the rig — production default of 10 throttles repeated Playwright transport runs from one host IP |