# mbproxy operations runbook

Day-two operations reference for the mbproxy Windows Service: install, upgrade, configuration, logs, and troubleshooting.

## Install

### Prerequisites

- Windows 10 / Server 2019 or later (64-bit).
- PowerShell 5.1+ run as Administrator (the install script uses `#Requires -RunAsAdministrator`).
- The compiled publish output from `dotnet publish` (see [README.md](../README.md) for the exact command).
- Modbus TCP reachable from the proxy host to the PLCs on port 502.
- Port 8080 (or whatever `AdminPort` is set to) available for the status page.

### Steps

1. Publish the binaries on the build machine:

   ```powershell
   dotnet publish src/Mbproxy/Mbproxy.csproj -c Release -r win-x64 --self-contained true -o C:\build\mbproxy-publish
   ```

2. Copy the publish output to the target server (or run the install script locally if you built on the server).

3. Open an elevated PowerShell prompt and run the install script:

   ```powershell
   .\install\install.ps1 -PublishOutput C:\build\mbproxy-publish -Start
   ```

   The script:
   - Copies binaries to `C:\Program Files\Mbproxy\` (configurable via `-InstallPath`).
   - Registers the service with `sc.exe create`.
   - Sets failure-recovery: restart after 60 s on first/second failure, no action on third.
   - Creates `%ProgramData%\mbproxy\logs\` and sets ACLs if needed.
   - Copies `mbproxy.config.template.json` → `%ProgramData%\mbproxy\appsettings.json` **only if no config exists**.
   - Registers the Windows Event Log source `mbproxy`.
   - With `-Start`, starts the service and waits up to 30 s for `RUNNING` state.

4. Edit `%ProgramData%\mbproxy\appsettings.json` to configure your PLC list and BCD tags. See the template for inline comments on every field.

5. If you edited the config before starting, start the service:

   ```powershell
   sc.exe start mbproxy
   ```

6. Verify (smoke checklist — see [Smoke checklist](#first-install-smoke-checklist) below).

### Re-running install on an existing installation

The install script is idempotent. Re-running it:
- Stops the service if running.
- Overwrites the binaries.
- Updates the service config via `sc.exe config` (not `sc.exe create`).
- Preserves `%ProgramData%\mbproxy\appsettings.json` (never overwritten on update).
- Skips Event Log source creation if already registered.

## Upgrade procedure

1. Publish new binaries on the build machine (same command as install step 1).

2. Stop the service:

   ```powershell
   sc.exe stop mbproxy
   ```

   Wait for the service to reach `STOPPED` state — graceful shutdown drains in-flight PDUs (up to `Connection.GracefulShutdownTimeoutMs`, default 10 s).

3. Copy new binaries to `C:\Program Files\Mbproxy\` (or run `install.ps1 -PublishOutput ...` to automate steps 2–4):

   ```powershell
   Copy-Item -Path C:\build\mbproxy-publish\* -Destination 'C:\Program Files\Mbproxy\' -Force
   ```

4. Start the service:

   ```powershell
   sc.exe start mbproxy
   ```

5. Check the status page to confirm the new version:

   ```powershell
   Invoke-RestMethod http://localhost:8080/status.json | Select-Object -ExpandProperty service
   ```

   The `version` field should show the new build.

## Uninstall

```powershell
.\install\uninstall.ps1
```

Options:
- `-KeepConfig` — preserves `%ProgramData%\mbproxy\appsettings.json` for re-install.
- Log files are **always archived** to `%ProgramData%\mbproxy.archived-<timestamp>\logs\` regardless of `-KeepConfig`. They are never deleted.

## Configuration

The service reads `%ProgramData%\mbproxy\appsettings.json` at startup and watches it for changes while running. Most settings are hot-reloadable; a save triggers a re-bind of `IOptionsMonitor<MbproxyOptions>` and a per-change-kind reconcile.

- Full schema (every `Mbproxy:*` key, defaults, validation rules, examples): [`Operations/Configuration.md`](Operations/Configuration.md).
- Per-change-kind reconcile semantics (what propagates instantly vs. what requires a restart): [`Features/HotReload.md`](Features/HotReload.md).

If a reload is rejected (`mbproxy.config.reload.rejected` in the log), the service continues running with the previous config. Fix the JSON and save again — the next valid file write is accepted.

## Logs

### Location

Rolling log files live at: `C:\ProgramData\mbproxy\logs\mbproxy-<date>.log`

One file per day, retained for 30 days by default (controlled by `retainedFileCountLimit` in the Serilog config section).

### Windows Event Log

When running as a Windows Service, the `EventLogBridge` sink writes events at Error level and above to the Windows Application Event Log under source `mbproxy`. View with:

```powershell
Get-EventLog -LogName Application -Source mbproxy -Newest 20
```

Or open Event Viewer → Windows Logs → Application, filter by source `mbproxy`.

### Log survival after uninstall

`uninstall.ps1` **never deletes log files**. It moves `logs\` to a timestamped archive at `%ProgramData%\mbproxy.archived-<timestamp>\logs\` so post-crash diagnostics remain accessible.

## Status page

**URL:** `http://<proxy-host>:<AdminPort>/` (default port 8080; change via `Mbproxy.AdminPort` in `appsettings.json`).

Routes: `GET /` (auto-refreshing HTML, no external assets) and `GET /status.json` (same data as JSON for monitoring scrapers).

The full endpoint shape, every JSON field, counter semantics, and scraping examples live in [`Operations/StatusPage.md`](Operations/StatusPage.md). KPI catalog and dashboard guidance: [`kpi.md`](kpi.md).

## Common failure modes

The full diagnosis playbook — startup bind conflicts, backend connectivity, hot-reload validation errors, BCD rewrite anomalies, performance and queue-depth issues, response-cache anomalies, and graceful-shutdown problems — is keyed to log events and status counters in [`Operations/Troubleshooting.md`](Operations/Troubleshooting.md). The complete `mbproxy.*` event catalog with levels, properties, and operator implications is in [`Reference/LogEvents.md`](Reference/LogEvents.md).

## First-install smoke checklist

Run these commands after `install.ps1 -Start` to verify the deployment:

```powershell
# 1. Service is running
Get-Service mbproxy | Select-Object Status, DisplayName

# 2. Status page is reachable
Invoke-WebRequest http://localhost:8080/ -UseBasicParsing | Select-Object StatusCode

# 3. JSON endpoint returns expected fields
$status = Invoke-RestMethod http://localhost:8080/status.json
$status.service | Select-Object version, uptimeSeconds
$status.listeners

# 4. Log file exists and is recent
Get-Item "C:\ProgramData\mbproxy\logs\mbproxy-*.log" | Sort-Object LastWriteTime -Descending | Select-Object -First 1

# 5. No Error events in the Event Log
Get-EventLog -LogName Application -Source mbproxy -EntryType Error -Newest 5

# 6. Stop the service cleanly (graceful shutdown within 10 s)
$sw = [System.Diagnostics.Stopwatch]::StartNew()
sc.exe stop mbproxy
$deadline = [DateTime]::UtcNow.AddSeconds(15)
do { Start-Sleep 1 } until ((Get-Service mbproxy).Status -eq 'Stopped' -or [DateTime]::UtcNow -gt $deadline)
$sw.Stop()
Write-Host "Stop elapsed: $($sw.ElapsedMilliseconds) ms"
(Get-Service mbproxy).Status   # Should be Stopped
```

**Note:** This checklist documents the expected steps. It was not executed on a dedicated clean VM (the proxy was developed and unit/E2E tested in-process). Run this checklist on first deployment to a production host.