mbproxy: Wave 2 fixes from 2026-05-14 code review

Resolves the 21 Major findings catalogued in
codereviews/2026-05-14/RemediationPlan.md (Wave 2). Tests: 370 pass / 0 fail
(baseline 363 + 7 new W2 regression tests).

Multiplexer / concurrency:
  W2.1  ConfigReconciler.Attach now threads the live coalescingAccessor through
        to add/restart-built supervisors so a hot-reload of
        ReadCoalescing.{Enabled,MaxParties} propagates to PLCs added or
        restarted via reload.
  W2.2  PlcMultiplexer._disposed and UpstreamPipe._disposed are now volatile
        for ARM/portability defense.
  W2.3  ProxyWorker._supervisors / ConfigReconciler._supervisors switched from
        Dictionary to ConcurrentDictionary; reconciler uses TryRemove. The
        outer Apply is serialised by a semaphore but the inner Add/Remove/
        Restart Task.WhenAll continuations run in parallel.
  W2.4  Counter parity for cache miss + coalescing-saturation miss documented
        inline (per-design contract; behavior unchanged).
  W2.5  _disposeCts.Dispose() and _connectGate.Dispose() guarded against late
        watchdog ticks.
  W2.6  _connectGate disposed in DisposeAsync.
  W2.7  Inline doc clarifying the post-rewriter FC byte read.

Cache / hot-reload:
  W2.8  PlcListenerSupervisor.ReplaceContextAsync now calls Clear() to capture
        the entry count, emits mbproxy.cache.flushed, then disposes the old
        cache. Previously the event was defined but never emitted.
  W2.9  Inline doc explaining the implicit "skip cache invalidation while
        recovering" gating (no backend reader during recovery → no FC06/FC16
        response → no invalidation).
  W2.10 ReloadValidator now re-checks resolved per-tag CacheTtlMs against
        Cache.AllowLongTtl after BcdTagMapBuilder folds the per-PLC default.

BCD rewriter:
  W2.11 Duplicate addresses detected within Global itself and within the per-PLC
        Add list itself, BEFORE the working dictionary collapses keys. Cross-list
        collisions (Global vs Add) remain the documented width-override pattern.
        Previously the DuplicateAddress error was unreachable dead code.
  W2.12 OverlappingHighRegister reports each colliding pair exactly once
        (canonicalised low/high pair tracked in a HashSet).
  W2.13 FC16 32-bit write rejects clientLow > 9999 or clientHigh > 9999 BEFORE
        the high*10000+low reconstruction. Without this guard, (high=9999,
        low=9999) silently re-encoded as (high=9998, low=9999), losing 1 from
        the high word.
  W2.14 FC16 validates pdu.Length >= 6 + qty*2 upfront — no half-rewritten
        requests when a malformed client claims more registers than it ships.

Supervisor:
  W2.15 WaitForInitialBindAttemptAsync now backed by TaskCompletionSource
        instead of 10ms busy-poll. Resolves race against fast Stopped→Bound→
        Stopped transitions and hangs when the supervisor task throws.
  W2.16 StartAsync refuses re-entry on a non-Stopped supervisor (was leaking
        the previous _supervisorCts).
  W2.17 New TransitionTo helper writes _state, _lastBindError, and (optionally)
        _recoveryAttempts under one lock. Snapshot() reads under the same lock
        so the status page never reports an inconsistent triple. Truncate
        helper extracted (was copy-pasted across three sites).
  W2.18 MbproxyOptionsValidator + ReloadValidator reject Connection.{Backend
        ConnectTimeoutMs, BackendRequestTimeoutMs, GracefulShutdownTimeoutMs}
        <= 0. Misconfigured 0 produces immediate CancelAfter(0) failures.

Hosting / diagnostics:
  W2.20 ProxyWorker.StopAsync supervisor-stop deadline now reads from
        IOptionsMonitor.CurrentValue.Connection.GracefulShutdownTimeoutMs
        (was hard-coded 5s).
  W2.21 src/Mbproxy/appsettings.json deleted; the published file is now a Link
        to install/mbproxy.config.template.json so the binary ships with a
        usable, fully-commented example config instead of an empty stub. Tests
        strip the inherited file from their bin via an AfterTargets="Build"
        Target so they don't pick up the template's example PLCs.
  W2.22 invalidBcdWarnings (PlcPdusStatus) and codeOther (ExceptionCounts)
        added to StatusDto, plumbed through StatusSnapshotBuilder, surfaced
        in StatusHtmlRenderer table cells.
  W2.23 EventLogBridge caches EventLog.SourceExists at construction so Emit
        doesn't hit the registry on every Error+ log line.

New regression tests:
  ReloadValidatorTests:
    Validate_PerTagCacheTtl_Above60s_Without_AllowLongTtl_Fails
    Validate_PerTagCacheTtl_Above60s_With_AllowLongTtl_Passes
    Validate_ResolvedTtl_FromPerPlcDefault_AboveCap_Fails
    Validate_ZeroBackendConnectTimeoutMs_Fails
    Validate_NegativeGracefulShutdownTimeoutMs_Fails
  BcdPduPipelineTests:
    FC16_32Bit_ClientHighOrLowAbove9999_PassesThroughRaw_WithInvalidBcdWarning
    FC16_TruncatedRegisterData_PassesThroughRaw_NoPartialRewrite

Reworked tests in BcdTagMapBuilderTests for the W2.11 contract (Global dup,
Add dup, Add-overrides-Global accepted as width override).

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>

mbproxy/src/Mbproxy/Diagnostics/EventLogBridge.cs

@@ -29,10 +29,19 @@ internal sealed class EventLogBridge : ILogEventSink
     private const int MaxMessageBytes = 32 * 1024; // 32 KB Event Log limit
 
     private readonly bool _enabled;
+    // Phase 12 (W2.23) — cache the source-exists check at construction so Emit doesn't
+    // hit the registry on every Error+ log line. A missing source after start requires a
+    // service restart to pick up; in practice install.ps1 registers it once at install.
+    private readonly bool _sourceExists;
 
     public EventLogBridge(bool enabled)
     {
         _enabled = enabled;
+        if (_enabled)
+        {
+            try { _sourceExists = EventLog.SourceExists(Source); }
+            catch { _sourceExists = false; }
+        }
     }
 
     /// <inheritdoc/>
@@ -41,9 +50,9 @@ internal sealed class EventLogBridge : ILogEventSink
         if (!_enabled) return;
         if (logEvent.Level < LogEventLevel.Error) return;
 
-        // Check that the source exists; if not, silently swallow — the service
-        // account may not be able to create it and we must not crash the logger.
-        if (!EventLog.SourceExists(Source)) return;
+        // Cached at construction (W2.23) — silently swallow if the source isn't registered.
+        // The service account may not be able to create it and we must not crash the logger.
+        if (!_sourceExists) return;
 
         string message = logEvent.RenderMessage();