9377fa1678
WP3.3 of the ScadaBridge architectural-review remediation. Six changes, all wire-compatible with 0.1.x peers — no proto change, no lib_schema_version bump. The on-disk bookkeeping schema goes to v2 and is upgraded in place when a file is opened. DeregisterReplicated(table). There was no way to stop capturing once a file had been registered, so a node that does not replicate kept paying three triggers inside every write transaction, appending to an oplog nothing would ever drain. Drops the triggers and prunes the table's oplog + row-version rows in one transaction; idempotent, and deliberately usable on a table this process never registered, since stale triggers left by an EARLIER build are the primary case. Deregistration must be symmetric across a pair, and already is enforced: the handshake compares registered-table digests fail-closed, so a node that drops a table its peer still replicates stops syncing loudly rather than diverging. RegisterReplicated(table, baselineExistingRows: true). Closes the late-opt-in hole: the snapshot streamer pages from __localdb_row_version, which only triggers populate, so a node that started replicating LATE never sent its pre-existing rows — silently, forever. Seeding alone would not have fixed it, because a node whose oplog starts at seq 1 presents no gap at the handshake and is told it needs no snapshot; the seed therefore also flags needs_snapshot, and the existing resync machinery carries the rows. The floor is HLC 0 stamped with this node's id: every genuine HLC is a UTC millisecond shifted left 16 bits and so is strictly greater, which makes a baselined row lose every comparison against a real remote write and win only where the peer has no version of that key at all. Two nodes baselining the same key both hold 0 and resolve by the node-id tie-break — convergent, and nothing better is available for two rows of unordered antiquity. Opt-in, so the documented CDC contract is unchanged unless asked. Pruning the ledger on deregister is safe precisely because re-registration can re-baseline; the two APIs are a pair. O(1) backlog depth. GetOplogDepth ran COUNT(*) over the entire unacked backlog, once a minute from maintenance AND on every metrics scrape — a full scan of a million rows exactly when a node is already behind. Now MAX(seq) - MAX(last_acked_seq, MIN(seq) - 1), floored at 0: three b-tree seeks, measured at 58 VM steps against 100,020 for the count on a 50k backlog. Exact, because seq is AUTOINCREMENT and every prune path removes a prefix (ack pruning by watermark, the row cap by count, the age cap by an HLC cutoff that rises with seq). The MIN clamp is what keeps it exact after a cap prune has moved the horizon above a stalled watermark — without it the caps would re-flag on every tick forever. Byte-budget batching. MaxBatchSize was the only cap on an outbound message, which made it a proxy for a byte budget that consumers had to tune against their widest row: ScadaBridge pinned it to 16 because 70 KB config_json times the 500 default is ~35 MB against a 4 MB gRPC limit. MaxBatchBytes (default 2 MB) now bounds delta and snapshot messages by summed serialized size, with the row count demoted to a secondary cap. A row larger than the budget is sent alone rather than stalling the stream on it. Since more, smaller messages would otherwise mean more apply transactions and more acks, inbound delta batches and acks ALREADY queued are coalesced — one transaction and one ack per burst, bounded by the sender's own caps, and a no-op under a trickle. LwwApplier prepares each statement once. It went through the generic transaction façade, which builds a fresh SqliteCommand per call: three SQL parses per applied row, on the path that drains a reconnect backlog. Statements are now held for the batch and rebound. Dropped __localdb_oplog_hlc. It indexed (table_name, pk_json, hlc), which no query has ever used — every oplog access path is by seq or a full hlc-predicate delete — while costing a b-tree insert inside every captured consumer write. 184/184 tests pass (was 149). New coverage: schema upgrade drops the index and preserves identity/watermarks/data, deregistration idempotency and trigger absence and cross-process cleanup, baseline seeding at the floor with LWW safety proved through the real applier, depth asserted equal to the counting query across every prune scenario plus a constant-time assertion over a 200k backlog, byte-budget chunking including the one-giant-row edge on both the delta and snapshot paths, prepare-once statement counting, and coalescing that must not swallow the message that ends its run. Version 0.2.0.
483 lines
20 KiB
C#
483 lines
20 KiB
C#
using Microsoft.Data.Sqlite;
|
|
using ZB.MOM.WW.LocalDb.Internal;
|
|
using ZB.MOM.WW.LocalDb.Replication;
|
|
using ZB.MOM.WW.LocalDb.Replication.Internal;
|
|
|
|
namespace ZB.MOM.WW.LocalDb.Tests;
|
|
|
|
public sealed class LwwApplierTests : IDisposable
|
|
{
|
|
private const string Pk1 = "{\"id\":1}";
|
|
|
|
private readonly string _path = Path.Combine(Path.GetTempPath(), Guid.NewGuid() + ".db");
|
|
private readonly string _path2 = Path.Combine(Path.GetTempPath(), Guid.NewGuid() + ".db");
|
|
|
|
public void Dispose()
|
|
{
|
|
SqliteConnection.ClearAllPools();
|
|
if (File.Exists(_path))
|
|
File.Delete(_path);
|
|
if (File.Exists(_path2))
|
|
File.Delete(_path2);
|
|
}
|
|
|
|
private async Task<SqliteLocalDb> NewOrdersDb()
|
|
{
|
|
var db = new SqliteLocalDb(new LocalDbOptions { Path = _path });
|
|
await db.ExecuteAsync("CREATE TABLE orders (id INTEGER PRIMARY KEY, sku TEXT, qty INTEGER)");
|
|
db.RegisterReplicated("orders");
|
|
return db;
|
|
}
|
|
|
|
private static async Task<long> RowVersionHlc(SqliteLocalDb db, string pkJson)
|
|
{
|
|
var r = await db.QueryAsync(
|
|
"SELECT hlc FROM __localdb_row_version WHERE table_name = 'orders' AND pk_json = @pk",
|
|
x => x.GetInt64(0), new { pk = pkJson });
|
|
return r[0];
|
|
}
|
|
|
|
private static async Task<(string? Sku, long? Qty)?> ReadOrder(SqliteLocalDb db, long id)
|
|
{
|
|
var r = await db.QueryAsync(
|
|
"SELECT sku, qty FROM orders WHERE id = @id",
|
|
x => (x.IsDBNull(0) ? null : x.GetString(0), (long?)(x.IsDBNull(1) ? null : x.GetInt64(1))),
|
|
new { id });
|
|
return r.Count == 0 ? null : r[0];
|
|
}
|
|
|
|
private static async Task<long> OplogCount(SqliteLocalDb db)
|
|
{
|
|
var r = await db.QueryAsync("SELECT COUNT(*) FROM __localdb_oplog", x => x.GetInt64(0));
|
|
return r[0];
|
|
}
|
|
|
|
private static OplogEntryRecord Entry(
|
|
long seq, string pkJson, string? rowJson, long hlc, string nodeId, bool tombstone = false) =>
|
|
new(seq, "orders", pkJson, rowJson, hlc, nodeId, tombstone);
|
|
|
|
[Fact]
|
|
public async Task Apply_NewerRemote_Wins()
|
|
{
|
|
using var db = await NewOrdersDb();
|
|
await db.ExecuteAsync("INSERT INTO orders (id, sku, qty) VALUES (1, 'LOCAL', 5)");
|
|
var localHlc = await RowVersionHlc(db, Pk1);
|
|
|
|
var result = await new LwwApplier(db).ApplyBatchAsync(
|
|
[Entry(1, Pk1, "{\"id\":1,\"sku\":\"REMOTE\",\"qty\":99}", localHlc + 1000, "remote-node")], default);
|
|
|
|
Assert.Equal(1, result.Applied);
|
|
var row = await ReadOrder(db, 1);
|
|
Assert.Equal(("REMOTE", (long?)99), row);
|
|
|
|
var rv = await db.QueryAsync(
|
|
"SELECT hlc, node_id FROM __localdb_row_version WHERE pk_json = @pk",
|
|
x => (Hlc: x.GetInt64(0), Node: x.GetString(1)), new { pk = Pk1 });
|
|
Assert.Equal(localHlc + 1000, rv[0].Hlc);
|
|
Assert.Equal("remote-node", rv[0].Node);
|
|
}
|
|
|
|
[Fact]
|
|
public async Task Apply_OlderRemote_Discarded_StillCounted()
|
|
{
|
|
using var db = await NewOrdersDb();
|
|
await db.ExecuteAsync("INSERT INTO orders (id, sku, qty) VALUES (1, 'LOCAL', 5)");
|
|
var localHlc = await RowVersionHlc(db, Pk1);
|
|
|
|
var result = await new LwwApplier(db).ApplyBatchAsync(
|
|
[Entry(7, Pk1, "{\"id\":1,\"sku\":\"OLD\",\"qty\":1}", localHlc - 1000, "remote-node")], default);
|
|
|
|
Assert.Equal(0, result.Applied);
|
|
Assert.Equal(1, result.Discarded);
|
|
Assert.Equal(7, result.AppliedThruSeq);
|
|
Assert.Equal(("LOCAL", (long?)5), await ReadOrder(db, 1));
|
|
|
|
var peer = await db.QueryAsync(
|
|
"SELECT last_applied_remote_seq FROM __localdb_peer_state WHERE id = 1", x => x.GetInt64(0));
|
|
Assert.Equal(7, peer[0]);
|
|
}
|
|
|
|
[Fact]
|
|
public async Task Apply_EqualHlc_NodeIdTieBreak_Deterministic()
|
|
{
|
|
// Greater remote node_id wins the tie.
|
|
using (var db = await NewOrdersDb())
|
|
{
|
|
await db.ExecuteAsync("INSERT INTO orders (id, sku, qty) VALUES (1, 'LOCAL', 5)");
|
|
var localHlc = await RowVersionHlc(db, Pk1);
|
|
var greater = db.NodeId + "z";
|
|
Assert.True(string.CompareOrdinal(greater, db.NodeId) > 0);
|
|
|
|
var result = await new LwwApplier(db).ApplyBatchAsync(
|
|
[Entry(1, Pk1, "{\"id\":1,\"sku\":\"WINS\",\"qty\":9}", localHlc, greater)], default);
|
|
|
|
Assert.Equal(1, result.Applied);
|
|
Assert.Equal(("WINS", (long?)9), await ReadOrder(db, 1));
|
|
}
|
|
|
|
SqliteConnection.ClearAllPools();
|
|
File.Delete(_path);
|
|
|
|
// Smaller remote node_id loses the tie.
|
|
using (var db = await NewOrdersDb())
|
|
{
|
|
await db.ExecuteAsync("INSERT INTO orders (id, sku, qty) VALUES (1, 'LOCAL', 5)");
|
|
var localHlc = await RowVersionHlc(db, Pk1);
|
|
var smaller = "!" + db.NodeId;
|
|
Assert.True(string.CompareOrdinal(smaller, db.NodeId) < 0);
|
|
|
|
var result = await new LwwApplier(db).ApplyBatchAsync(
|
|
[Entry(1, Pk1, "{\"id\":1,\"sku\":\"LOSES\",\"qty\":9}", localHlc, smaller)], default);
|
|
|
|
Assert.Equal(0, result.Applied);
|
|
Assert.Equal(1, result.Discarded);
|
|
Assert.Equal(("LOCAL", (long?)5), await ReadOrder(db, 1));
|
|
}
|
|
}
|
|
|
|
[Fact]
|
|
public async Task Apply_NewRow_Inserts()
|
|
{
|
|
using var db = await NewOrdersDb();
|
|
|
|
var result = await new LwwApplier(db).ApplyBatchAsync(
|
|
[Entry(3, Pk1, "{\"id\":1,\"sku\":\"NEW\",\"qty\":42}", 5_000_000, "remote-node")], default);
|
|
|
|
Assert.Equal(1, result.Applied);
|
|
Assert.Equal(("NEW", (long?)42), await ReadOrder(db, 1));
|
|
}
|
|
|
|
[Fact]
|
|
public async Task Apply_Tombstone_DeletesRow()
|
|
{
|
|
using var db = await NewOrdersDb();
|
|
await db.ExecuteAsync("INSERT INTO orders (id, sku, qty) VALUES (1, 'LOCAL', 5)");
|
|
var localHlc = await RowVersionHlc(db, Pk1);
|
|
|
|
var result = await new LwwApplier(db).ApplyBatchAsync(
|
|
[Entry(4, Pk1, null, localHlc + 1000, "remote-node", tombstone: true)], default);
|
|
|
|
Assert.Equal(1, result.Applied);
|
|
Assert.Null(await ReadOrder(db, 1));
|
|
|
|
var rv = await db.QueryAsync(
|
|
"SELECT is_tombstone, hlc FROM __localdb_row_version WHERE pk_json = @pk",
|
|
x => (Tomb: x.GetInt64(0), Hlc: x.GetInt64(1)), new { pk = Pk1 });
|
|
Assert.Equal(1, rv[0].Tomb);
|
|
Assert.Equal(localHlc + 1000, rv[0].Hlc);
|
|
}
|
|
|
|
[Fact]
|
|
public async Task Apply_DoesNotFireCaptureTriggers()
|
|
{
|
|
using var db = await NewOrdersDb();
|
|
await db.ExecuteAsync("INSERT INTO orders (id, sku, qty) VALUES (1, 'LOCAL', 5)");
|
|
var before = await OplogCount(db);
|
|
|
|
await new LwwApplier(db).ApplyBatchAsync(
|
|
[
|
|
Entry(1, Pk1, "{\"id\":1,\"sku\":\"R\",\"qty\":9}", 9_000_000, "remote-node"),
|
|
Entry(2, "{\"id\":2}", "{\"id\":2,\"sku\":\"R2\",\"qty\":7}", 9_000_001, "remote-node"),
|
|
], default);
|
|
|
|
Assert.Equal(before, await OplogCount(db));
|
|
}
|
|
|
|
[Fact]
|
|
public async Task Apply_Batch_Atomic_WatermarkSameTxn()
|
|
{
|
|
using var db = await NewOrdersDb();
|
|
|
|
var result = await new LwwApplier(db).ApplyBatchAsync(
|
|
[
|
|
Entry(10, Pk1, "{\"id\":1,\"sku\":\"A\",\"qty\":1}", 1_000_000, "remote-node"),
|
|
Entry(11, "{\"id\":2}", "{\"id\":2,\"sku\":\"B\",\"qty\":2}", 1_000_001, "remote-node"),
|
|
], default);
|
|
|
|
Assert.Equal(2, result.Applied);
|
|
Assert.Equal(11, result.AppliedThruSeq);
|
|
|
|
// Data and the watermark are both visible => they committed in one transaction.
|
|
Assert.Equal(("A", (long?)1), await ReadOrder(db, 1));
|
|
Assert.Equal(("B", (long?)2), await ReadOrder(db, 2));
|
|
var peer = await db.QueryAsync(
|
|
"SELECT last_applied_remote_seq, last_seen_hlc FROM __localdb_peer_state WHERE id = 1",
|
|
x => (Seq: x.GetInt64(0), Hlc: x.GetInt64(1)));
|
|
Assert.Equal(11, peer[0].Seq);
|
|
Assert.Equal(1_000_001, peer[0].Hlc);
|
|
}
|
|
|
|
[Fact]
|
|
public async Task Apply_UnregisteredTable_Throws_NothingApplied()
|
|
{
|
|
using var db = await NewOrdersDb();
|
|
|
|
var batch = new OplogEntryRecord[]
|
|
{
|
|
Entry(20, Pk1, "{\"id\":1,\"sku\":\"A\",\"qty\":1}", 1_000_000, "remote-node"),
|
|
new(21, "widgets", "{\"id\":9}", "{\"id\":9}", 1_000_001, "remote-node", false),
|
|
};
|
|
|
|
await Assert.ThrowsAsync<LocalDbSchemaMismatchException>(
|
|
() => new LwwApplier(db).ApplyBatchAsync(batch, default));
|
|
|
|
// The valid entry that preceded the violation must not have been applied.
|
|
Assert.Null(await ReadOrder(db, 1));
|
|
var peer = await db.QueryAsync(
|
|
"SELECT last_applied_remote_seq FROM __localdb_peer_state WHERE id = 1", x => x.GetInt64(0));
|
|
Assert.Equal(0, peer[0]);
|
|
}
|
|
|
|
[Fact]
|
|
public async Task Apply_PoisonEntry_DeadLettered_BatchContinues()
|
|
{
|
|
using var db = await NewOrdersDb();
|
|
|
|
var result = await new LwwApplier(db).ApplyBatchAsync(
|
|
[
|
|
Entry(30, Pk1, "NOT VALID JSON", 1_000_000, "remote-node"),
|
|
Entry(31, "{\"id\":2}", "{\"id\":2,\"sku\":\"OK\",\"qty\":8}", 1_000_001, "remote-node"),
|
|
], default);
|
|
|
|
Assert.Equal(1, result.DeadLettered);
|
|
Assert.Equal(1, result.Applied);
|
|
Assert.Equal(("OK", (long?)8), await ReadOrder(db, 2));
|
|
Assert.Null(await ReadOrder(db, 1));
|
|
|
|
var dead = await db.QueryAsync(
|
|
"SELECT pk_json, error FROM __localdb_dead_letter",
|
|
x => (Pk: x.GetString(0), Err: x.GetString(1)));
|
|
Assert.Single(dead);
|
|
Assert.Equal(Pk1, dead[0].Pk);
|
|
Assert.NotEmpty(dead[0].Err);
|
|
}
|
|
|
|
[Fact]
|
|
public async Task Apply_IsIdempotent()
|
|
{
|
|
using var db = await NewOrdersDb();
|
|
var batch = new OplogEntryRecord[]
|
|
{
|
|
Entry(40, Pk1, "{\"id\":1,\"sku\":\"X\",\"qty\":3}", 7_000_000, "remote-node"),
|
|
new(41, "orders", "{\"id\":2}", "{\"id\":2,\"sku\":\"Y\",\"qty\":4}", 7_000_001, "remote-node", false),
|
|
};
|
|
var applier = new LwwApplier(db);
|
|
|
|
var first = await applier.ApplyBatchAsync(batch, default);
|
|
Assert.Equal(2, first.Applied);
|
|
|
|
var second = await applier.ApplyBatchAsync(batch, default);
|
|
Assert.Equal(0, second.Applied);
|
|
Assert.Equal(2, second.Discarded);
|
|
|
|
Assert.Equal(("X", (long?)3), await ReadOrder(db, 1));
|
|
Assert.Equal(("Y", (long?)4), await ReadOrder(db, 2));
|
|
var rows = await db.QueryAsync("SELECT COUNT(*) FROM orders", x => x.GetInt64(0));
|
|
Assert.Equal(2, rows[0]);
|
|
}
|
|
|
|
[Fact]
|
|
public async Task Apply_ObservesRemoteHlc()
|
|
{
|
|
using var db = await NewOrdersDb();
|
|
var maxHlc = (DateTimeOffset.UtcNow.AddDays(365).ToUnixTimeMilliseconds() << 16);
|
|
|
|
await new LwwApplier(db).ApplyBatchAsync(
|
|
[Entry(1, Pk1, "{\"id\":1,\"sku\":\"R\",\"qty\":1}", maxHlc, "remote-node")], default);
|
|
|
|
Assert.True(db.Clock.Next() > maxHlc);
|
|
}
|
|
|
|
[Fact]
|
|
public async Task Apply_AdvancesPeerState()
|
|
{
|
|
using var db = await NewOrdersDb();
|
|
|
|
await new LwwApplier(db).ApplyBatchAsync(
|
|
[
|
|
Entry(50, Pk1, "{\"id\":1,\"sku\":\"A\",\"qty\":1}", 3_000_000, "remote-node"),
|
|
Entry(52, "{\"id\":2}", "{\"id\":2,\"sku\":\"B\",\"qty\":2}", 3_000_050, "remote-node"),
|
|
], default);
|
|
|
|
var peer = await db.QueryAsync(
|
|
"SELECT last_applied_remote_seq, last_seen_hlc, last_sync_utc FROM __localdb_peer_state WHERE id = 1",
|
|
x => (Seq: x.GetInt64(0), Hlc: x.GetInt64(1), Utc: x.IsDBNull(2) ? null : x.GetString(2)));
|
|
|
|
Assert.Equal(52, peer[0].Seq);
|
|
Assert.Equal(3_000_050, peer[0].Hlc);
|
|
Assert.NotNull(peer[0].Utc);
|
|
Assert.EndsWith("Z", peer[0].Utc);
|
|
}
|
|
|
|
[Fact]
|
|
public async Task Apply_NullRowJsonNonTombstone_DeadLettered_NoPhantomRow()
|
|
{
|
|
using var db = await NewOrdersDb();
|
|
await db.ExecuteAsync("INSERT INTO orders (id, sku, qty) VALUES (1, 'LOCAL', 5)");
|
|
|
|
var result = await new LwwApplier(db).ApplyBatchAsync(
|
|
[Entry(60, "{\"id\":2}", null, 9_000_000_000_000_000, "remote-node", tombstone: false)], default);
|
|
|
|
Assert.Equal(1, result.DeadLettered);
|
|
Assert.Equal(0, result.Applied);
|
|
|
|
var dead = await db.QueryAsync(
|
|
"SELECT pk_json, error FROM __localdb_dead_letter",
|
|
x => (Pk: x.GetString(0), Err: x.GetString(1)));
|
|
Assert.Single(dead);
|
|
Assert.Equal("{\"id\":2}", dead[0].Pk);
|
|
Assert.Contains("null row_json", dead[0].Err);
|
|
|
|
// No phantom auto-rowid row: the table still holds exactly the one pre-existing row.
|
|
var rows = await db.QueryAsync("SELECT COUNT(*) FROM orders", x => x.GetInt64(0));
|
|
Assert.Equal(1, rows[0]);
|
|
Assert.Null(await ReadOrder(db, 2));
|
|
}
|
|
|
|
[Fact]
|
|
public async Task Apply_RoundTrip_PreservesRealAndBigIntegerExactly()
|
|
{
|
|
const double real17 = 1.2345678901234567; // 17 significant digits
|
|
const long bigInt = 9_007_199_254_740_993; // 2^53 + 1: not representable as a double
|
|
|
|
using var source = new SqliteLocalDb(new LocalDbOptions { Path = _path });
|
|
await source.ExecuteAsync("CREATE TABLE meas (id INTEGER PRIMARY KEY, r REAL, big INTEGER)");
|
|
source.RegisterReplicated("meas");
|
|
await source.ExecuteAsync(
|
|
"INSERT INTO meas (id, r, big) VALUES (1, @r, @big)", new { r = real17, big = bigInt });
|
|
|
|
var captured = await source.QueryAsync(
|
|
"SELECT seq, table_name, pk_json, row_json, hlc, node_id, is_tombstone FROM __localdb_oplog",
|
|
r => new OplogEntryRecord(
|
|
r.GetInt64(0), r.GetString(1), r.GetString(2), r.IsDBNull(3) ? null : r.GetString(3),
|
|
r.GetInt64(4), r.GetString(5), r.GetInt64(6) != 0));
|
|
Assert.Single(captured);
|
|
|
|
using var target = new SqliteLocalDb(new LocalDbOptions { Path = _path2 });
|
|
await target.ExecuteAsync("CREATE TABLE meas (id INTEGER PRIMARY KEY, r REAL, big INTEGER)");
|
|
target.RegisterReplicated("meas");
|
|
|
|
var result = await new LwwApplier(target).ApplyBatchAsync(captured, default);
|
|
Assert.Equal(1, result.Applied);
|
|
|
|
var applied = await target.QueryAsync(
|
|
"SELECT r, big FROM meas WHERE id = 1", x => (R: x.GetDouble(0), Big: x.GetInt64(1)));
|
|
Assert.Equal(BitConverter.DoubleToInt64Bits(real17), BitConverter.DoubleToInt64Bits(applied[0].R));
|
|
Assert.Equal(bigInt, applied[0].Big);
|
|
}
|
|
|
|
[Fact]
|
|
public async Task Apply_GuardAlwaysLoweredAfterBatch()
|
|
{
|
|
// The abort/rollback path needs no separate coverage: applying = 1 is set INSIDE the
|
|
// transaction, so any rollback restores it to 0 by SQLite transaction semantics.
|
|
using var db = await NewOrdersDb();
|
|
|
|
await new LwwApplier(db).ApplyBatchAsync(
|
|
[Entry(1, Pk1, "{\"id\":1,\"sku\":\"R\",\"qty\":1}", 5_000_000, "remote-node")], default);
|
|
|
|
var guard = await db.QueryAsync(
|
|
"SELECT applying FROM __localdb_applying WHERE id = 1", x => x.GetInt64(0));
|
|
Assert.Equal(0, guard[0]);
|
|
|
|
// A subsequent consumer write must capture normally — proof the guard is really down.
|
|
var before = await OplogCount(db);
|
|
await db.ExecuteAsync("INSERT INTO orders (id, sku, qty) VALUES (2, 'LOCAL', 2)");
|
|
Assert.Equal(before + 1, await OplogCount(db));
|
|
}
|
|
|
|
[Fact]
|
|
public async Task Apply_SameTable_TombstoneAndUpsert_OneBatch()
|
|
{
|
|
using var db = await NewOrdersDb();
|
|
await db.ExecuteAsync("INSERT INTO orders (id, sku, qty) VALUES (1, 'LOCAL', 5)");
|
|
var localHlc = await RowVersionHlc(db, Pk1);
|
|
|
|
var result = await new LwwApplier(db).ApplyBatchAsync(
|
|
[
|
|
Entry(70, Pk1, null, localHlc + 1000, "remote-node", tombstone: true),
|
|
Entry(71, "{\"id\":2}", "{\"id\":2,\"sku\":\"NEW\",\"qty\":7}", localHlc + 1001, "remote-node"),
|
|
], default);
|
|
|
|
Assert.Equal(2, result.Applied);
|
|
Assert.Null(await ReadOrder(db, 1));
|
|
Assert.Equal(("NEW", (long?)7), await ReadOrder(db, 2));
|
|
}
|
|
|
|
[Fact]
|
|
public async Task Apply_PreparesEachStatementOnce_NotOncePerRow()
|
|
{
|
|
// The regression this guards: the old shape went through the generic transaction façade,
|
|
// which builds a fresh SqliteCommand — and therefore re-parses the SQL — per call. Three
|
|
// statements per applied row means a 200-row batch parsed 600 statements to run 6 distinct
|
|
// ones. Statement count must track distinct SQL, not rows.
|
|
using var db = await NewOrdersDb();
|
|
await db.ExecuteAsync("CREATE TABLE widgets (id INTEGER PRIMARY KEY, name TEXT)");
|
|
db.RegisterReplicated("widgets");
|
|
|
|
var entries = new List<OplogEntryRecord>();
|
|
for (var i = 1; i <= 200; i++)
|
|
entries.Add(Entry(i, $"{{\"id\":{i}}}", $"{{\"id\":{i},\"sku\":\"S\",\"qty\":{i}}}", 1_000_000 + i, "remote"));
|
|
// A second table and a tombstone, so every statement kind in the set is exercised.
|
|
entries.Add(new OplogEntryRecord(
|
|
201, "widgets", "{\"id\":1}", "{\"id\":1,\"name\":\"W\"}", 1_000_300, "remote", false));
|
|
entries.Add(Entry(202, "{\"id\":1}", null, 1_000_400, "remote", tombstone: true));
|
|
|
|
var applier = new LwwApplier(db);
|
|
var result = await applier.ApplyBatchAsync(entries, default);
|
|
|
|
Assert.Equal(202, result.Applied);
|
|
// Four table-independent statements (applying guard, version lookup, row-version write,
|
|
// peer state), plus an upsert per table touched and a delete for the one table tombstoned.
|
|
Assert.Equal(7, applier.LastBatchStatementCount);
|
|
|
|
// ...and the batch is still correct, statement reuse notwithstanding.
|
|
Assert.Null(await ReadOrder(db, 1));
|
|
Assert.Equal(("S", (long?)200), await ReadOrder(db, 200));
|
|
var widget = await db.QueryAsync("SELECT name FROM widgets WHERE id = 1", x => x.GetString(0));
|
|
Assert.Equal("W", widget[0]);
|
|
}
|
|
|
|
[Fact]
|
|
public async Task Apply_ReusedStatements_SurviveAPoisonRowMidBatch()
|
|
{
|
|
// A statement that faults is reset and reused for the following rows; if it were not, one
|
|
// poison row would silently corrupt every row after it in the batch.
|
|
using var db = await NewOrdersDb();
|
|
|
|
var applier = new LwwApplier(db);
|
|
var result = await applier.ApplyBatchAsync(
|
|
[
|
|
Entry(1, "{\"id\":1}", "{\"id\":1,\"sku\":\"BEFORE\",\"qty\":1}", 1_000_000, "remote"),
|
|
Entry(2, "{\"id\":2}", "NOT VALID JSON", 1_000_001, "remote"),
|
|
Entry(3, "{\"id\":3}", "{\"id\":3,\"sku\":\"AFTER\",\"qty\":3}", 1_000_002, "remote"),
|
|
Entry(4, "{\"id\":4}", "ALSO NOT JSON", 1_000_003, "remote"),
|
|
Entry(5, "{\"id\":5}", "{\"id\":5,\"sku\":\"LAST\",\"qty\":5}", 1_000_004, "remote"),
|
|
], default);
|
|
|
|
Assert.Equal(3, result.Applied);
|
|
Assert.Equal(2, result.DeadLettered);
|
|
Assert.Equal(("BEFORE", (long?)1), await ReadOrder(db, 1));
|
|
Assert.Equal(("AFTER", (long?)3), await ReadOrder(db, 3));
|
|
Assert.Equal(("LAST", (long?)5), await ReadOrder(db, 5));
|
|
}
|
|
|
|
[Fact]
|
|
public async Task Apply_ReplaceExistingRow_DoesNotFireCaptureTriggers()
|
|
{
|
|
// INSERT OR REPLACE over an existing row also exercises the delete side of REPLACE;
|
|
// neither half may reach the capture triggers.
|
|
using var db = await NewOrdersDb();
|
|
await db.ExecuteAsync("INSERT INTO orders (id, sku, qty) VALUES (1, 'LOCAL', 5)");
|
|
var localHlc = await RowVersionHlc(db, Pk1);
|
|
var before = await OplogCount(db);
|
|
|
|
var result = await new LwwApplier(db).ApplyBatchAsync(
|
|
[Entry(80, Pk1, "{\"id\":1,\"sku\":\"REPL\",\"qty\":6}", localHlc + 1000, "remote-node")], default);
|
|
|
|
Assert.Equal(1, result.Applied);
|
|
Assert.Equal(("REPL", (long?)6), await ReadOrder(db, 1));
|
|
Assert.Equal(before, await OplogCount(db));
|
|
}
|
|
}
|