The final integration review's non-blocker reservations, all documentation
or comment truth except one test arm.
The alarm feed opens provider_status -> snapshot_status -> cached
active_alarm -> snapshot_complete, which is what GatewayAlarmMonitor has
done since the snapshot_status frame landed. Two places still described
the old order: docs/Grpc.md said provider_status arrived *after* the
initial snapshot, contradicting its own snapshot_status section two
paragraphs down, and AlarmFeedMessage's leading proto comment named
neither status frame at all. Both now state the sequence the monitor
emits, so a client author reading either one gets the frame order right.
The proto comment change flows through the generated trees (Contracts,
Go, Java) and the client descriptor set; the Rust vendored copy stays
byte-identical to canonical. Python's generator does not carry proto
comments into its output, so it has no delta.
AlarmsHubPublisherTests' valueless-payload case covered snapshot_complete
and provider_status but not snapshot_status, leaving the newest arm
unpinned against the redaction switch that must ignore it. Added.
WnWrapAlarmConsumer's ack comment led with the 2026-05-01 reading that
-55 tracks the 8-arg overload, then refuted itself six lines later with
the 2026-08-18 probe. It now leads with the observation labelled as
narrower than it reads -- mirroring the correction already in
docs/AlarmClientDiscovery.md -- so the block argues one thing: the 6-arg
call site stays for parity, and rc semantics are per the probe. A
paragraph orphaned by an earlier splice is rewrapped. Comment interior
only; the file compiles on Windows.
TST-16 gets a dated closure note rather than a rewrite: the flag it
called dead was implemented 2026-08-18. GatewayDashboardDesign's /browse
paragraph gains the failed-read carve-out GatewayConfiguration already
documented, so the two agree that a failed read keeps its - placeholder.
Follow-up to 90331b6. Three comment/prose corrections, no behaviour change.
AcknowledgeByName's comment still said the 6-arg overload "works and reaches the
alarm-history path correctly", which the same commit's own findings contradict in
three other places. It now says what was observed: rc=0 means accepted, not
applied — the 2026-08-18 probe acked a live alarm six ways and the snapshot, the
OPERATOR_NAME field, and the extension's .Acked attribute all stayed put. The -55
tracks the consumer, not the overload. Subscribe's comment gets the same
treatment: "lets AlarmAckByName succeed" becomes "return rc=0".
AlarmProbeFindings.md said the re-raise arrives as "a separate record" alongside
the returned one, which reads as coexistence and is wrong. The snapshot carries
one record per tag: the cap=1024 replies bracketing the re-raise are both
elementCount=3 (one per TestMachine_00{1,2,3}) at an identical 1613 bytes, and the
old GUID is absent from the later one. The re-raise replaces the record, so a
single poll spanning it sees the Clear and the Raise together.
Worker diff verified strictly comment-only; builds x86 on windev, 0W/0E.
AuthenticateUser("Administrator", "") + WriteSecured raises the alarm UDAs that
plain Write could not touch (SecurityError detail=1008), so the 2026-08-17 blocker
was the verb, exactly as that run's own Unblocking list predicted.
Two of the three open questions are now observed rather than assumed:
- ALARM_RECORDS/@COUNT reports the records in the reply, not the total active
count. With three alarms active it read 1 at cap 1 and 2 at cap 2. There is no
exact truncation signal to switch to, so IsTruncatedFetch's conservative rule is
the design rather than a placeholder — behaviour unchanged, only the comments.
- Clear-then-re-raise mints a new GUID; the ALM->RTN leg keeps its GUID
(reconfirming the 2026-05-01 capture). ComputeTransitions already reads the
re-raise correctly as one instance ending and another beginning.
The acknowledge leg stays unobserved for a narrower reason: every wnwrap ack
surface is inert on this rig. AlarmAckByName returns 0 from the ack-only consumer
and -55 from the SetXmlAlarmQuery-applied one, for both the 6-arg and 8-arg forms,
and neither the snapshot STATE, OPERATOR_NAME, nor the extension's own .Acked
attribute moves. That corrects AlarmClientDiscovery.md, which read the zero return
as a working ack.
Comment- and prose-only; no behaviour change. The three throwaway probes ran from
the windev CI clone and were deleted; that clone is a clean tree at ab3ff16.
Review found AlarmDispatcher.SnapshotActiveAlarms reading the snapshot and the
truncation verdict through two independent lock acquisitions, defended by a
comment claiming read-order made a race "widen only, never narrow". That claim
was false: a not-truncated -> truncated poll landing between the two reads pairs
a stale false with a capped snapshot, which is exactly the false all-clear the
feature exists to prevent. It was safe only because AlarmCommandHandler
STA-serializes consumer calls — an accident of the call graph, not an invariant.
Made the invariant structural instead of documented. IMxAccessAlarmConsumer now
exposes ONE accessor, `IReadOnlyList<MxAlarmSnapshotRecord> SnapshotActiveAlarms(
out bool truncated)`, which implementations must satisfy from a single
acquisition of the lock guarding the retained snapshot — mirroring the write
side, where FoldFetch already updates snapshot and verdict together. The
separate LastSnapshotTruncated property is gone from every layer, so there is no
second read left to pair badly. `out` over a result struct follows the file's
established idiom (FoldFetch, ParseSnapshotXml).
The same threading applies one level up: IAlarmCommandHandler.QueryActive now
carries `out bool snapshotTruncated`, so MxAccessCommandExecutor stamps the reply
payload from the value the records were stamped with rather than reading the
state a second time.
Direct tests for the three hops that were only covered end-to-end:
- AlarmDispatcherTests: truncated consumer snapshot stamps FromTruncatedSnapshot
on every mapped record, with a complete-snapshot control, plus an assertion
that the independent per-record Degraded flag is not dragged along.
- AlarmCommandHandlerTests: the verdict delegates through the dispatcher
(Theory over both values), and survives a prefix filter that removes every
record — the case the per-record flag cannot cover.
- AlarmCommandExecutorTests: the reply payload's SnapshotTruncated comes from the
handler (Theory over both values), including the zero-record case.
The WnWrapAlarmConsumer truncation tests now assert through
SnapshotActiveAlarms(out ...) rather than an internal field, because the pairing
is the contract.
Also: GatewayAlarmMonitor's _snapshotTruncated comment now says "as of the last
full reconcile" rather than implying it tracks the current _alarms contents,
which live transitions keep moving via ApplyTransition between passes.
Detection heuristic still untouched (fetchedRecordCount >= maxAlarmsPerFetch);
no @COUNT parsing, per docs/AlarmProbeFindings.md. Still additive gateway
metadata about our fetch mechanics, not MXAccess behavior — not a parity
deviation, and no event is synthesized.
Gateway: NonWindows.slnx builds clean (0 warnings); ~Alarm filter 107/107 pass.
Worker + Worker.Tests are windev-gated; the signature change was reviewed by
inspection across all 7 IMxAccessAlarmConsumer implementers, all 3
IAlarmCommandHandler implementers, and every call site.
The truncation-cliff fix made alarm transitions truncation-safe but silent:
when GetXmlCurrentAlarms2 returns exactly maxAlmCnt records the worker
suppresses absence-implies-Clear inference and says so only in a rate-limited
stderr warning. No client and no operator could tell a complete active set
from a capped one.
Two additive proto3 booleans carry the verdict out:
- QueryActiveAlarmsReplyPayload.snapshot_truncated = 2 (worker IPC reply)
- ActiveAlarmSnapshot.from_truncated_snapshot = 16 (per record)
The per-record field is not an aesthetic choice. QueryActiveAlarms returns a
bare `stream ActiveAlarmSnapshot` with no envelope, header, or trailer, so a
per-record boolean is the only carrier that stays wire-compatible; an envelope
message would change every existing client's stream element type. The reply
payload states it too because a prefix filter can leave zero records and a
truncated fetch with nothing to report still has to say so. The flag means
"this set may be incomplete", never "this record is unreliable" — it is
independent of the subtag-fallback `degraded` field.
Detection is deliberately UNCHANGED: IsTruncatedFetch remains
`fetchedRecordCount >= maxAlarmsPerFetch`. The live probe (docs/AlarmProbeFindings.md,
ce5d8ae) could not verify whether ALARM_RECORDS/@COUNT reports the total active
count or only the records in the reply, so @COUNT is not parsed for detection;
switching to it stays blocked on probe evidence. The probe's comment
annotations in WnWrapAlarmConsumer.cs are preserved.
Reset semantics: not latched. WnWrapAlarmConsumer.FoldFetch replaces the
verdict on every poll under the same lock as the snapshot merge, so the first
sub-cap fetch clears it; GatewayAlarmMonitor.ClearCache drops it with the cache
generation it describes. A caveat that never turns off is one operators learn
to ignore.
Flow: WnWrapAlarmConsumer.LastSnapshotTruncated -> AlarmDispatcher (stamps every
record) / IAlarmCommandHandler (payload) -> MxAccessCommandExecutor reply ->
GatewayAlarmMonitor._snapshotTruncated -> IGatewayAlarmService.SnapshotTruncated
-> DashboardAlarmQueryResult -> AlarmsPage warning banner (render-side only; the
poll loop and DisposeAsync drain are untouched). The public QueryActiveAlarms
RPC forwards worker snapshots unmodified, so the per-record flag needed no
mapper change — a test pins that.
Parity: this describes OUR fetch mechanics — additive gateway metadata — not
MXAccess provider behavior. No event is synthesized and no MXAccess-observable
semantics change, so it is not a parity deviation.
Tests: worker LastSnapshotTruncated set/reset/consecutive-burst (windev-run);
gateway end-to-end truncated reply -> monitor -> public stream, with the
complete-reply control as the load-bearing assertion; AlarmsPage banner
present/absent. Docs: gateway.md alarm surface, docs/DesignDecisions.md entry.
Both questions stay open, and the reason is the finding: the dev rig's alarm
UDAs reject a plain MXAccess Write with SecurityError/detail=1008 from the
responding automation object, so no alarm instance can be created to follow
through an acknowledge and no population can be built to overflow a capped
fetch. The rig is otherwise live — objects deployed and on scan, wnwrap
subscribed, GetXmlCurrentAlarms2 returning well-formed XML — which is what
makes the blocker specific and the unblock (engine-side script, or
AuthenticateUser + WriteSecured, or reclassifying the UDAs) actionable.
Comment-only changes in WnWrapAlarmConsumer: scope the GUID-identity claim to
the leg live capture actually covers, and record that ALARM_RECORDS/@COUNT
exists as a candidate exact truncation signal but is deliberately not trusted
because its semantics under a capped reply are unverified. No behavior change.
Resolve all CommentChecker findings across the gateway server, worker, tests,
and .NET client (314 -> 0 real issues): add missing <returns>/<summary>/<param>
on public and test members, convert Stream/interface overrides to <inheritdoc/>,
and remove internal task/issue tracking IDs (SEC-*, IPC-*, WRK-*, GWC-*, TST-*,
Client.Dotnet-*) from shipped code documentation while preserving the design
rationale prose. Shipped comments should not carry internal bookkeeping, and
complete XML docs keep the analyzer/TreatWarningsAsErrors gate and generated API
docs clean. The 6 remaining flags are heuristic false positives (MD5, UTC-4,
capacity-1, near-1601) left intact so real documentation is not corrupted.
Claude-Session: https://claude.ai/code/session_01DMXXvNuPekkkrTEyPNxEkW
Adds missing <summary>/<param> XML docs across 99 server, worker, and test
files so CommentChecker reports zero issues (TreatWarningsAsErrors needs the
analyzer clean). Bundles in WIP dashboard work: NavSection extraction,
MainLayout/site.css/js styling alignment, and DashboardOptions/Auth tweaks.
Apply the ZB.MOM.WW. prefix to all gateway-side projects, folders,
.csproj/.sln contents, C# namespaces, using directives, generated proto
C# (csharp_namespace + checked-in generated files), InternalsVisibleTo
attributes, project-name string literals (LoadProject, .sln lookups,
worker exe paths, staticwebassets manifest), and the install/script/doc
references that point at any of the above. Migrate the solution from
.sln to .slnx via `dotnet sln migrate` and delete the old file.
External-runtime identifiers are intentionally NOT prefixed so external
configuration keeps working:
- GatewayMetrics.cs MeterName ("MxGateway.Server")
- DashboardAuthenticationDefaults Scheme/Policy ("MxGateway.Dashboard")
- GatewayRequestLoggingMiddleware logger category ("MxGateway.Request")
- StaRuntime thread name ("MxGateway.Worker.STA")
- appsettings.json root section "MxGateway" + env-var prefix
MxGateway__... and secret-name MxGateway:ApiKeyPepper
- C:\ProgramData\MxGateway\ data dir paths
Also fixes two tests that were not rename-related but became visible
while validating the rename:
- WorkerLiveMxAccessSmokeTests.ShutDownAsync: cancellation that the
gateway service correctly maps to RpcException(Cancelled) per gRPC
convention was being misclassified as a stream fault. Added a sibling
catch on RpcException with StatusCode.Cancelled.
- IntegrationTestEnvironment.ResolveRepositoryRoot: extracted IsRepositoryRoot
and made it accept either a .git marker OR a .sln/.slnx next to src/
so the worker-exe walker works in non-git working copies.
clients/proto/proto-inputs.json's protoRoot updated to point at
src/ZB.MOM.WW.MxGateway.Contracts/Protos.
Verified by `dotnet build` and a full `dotnet test` of the .slnx with
MXGATEWAY_RUN_LIVE_{MXACCESS,LDAP,GALAXY}_TESTS=1:
Tests: 472/472 pass
Worker.Tests: 280/280 pass (4 dev-rig [Fact(Skip=...)] skipped)
IntegrationTests: 18/18 pass
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Joseph Doherty