Change-log row for 2026-08-07: what landed for WRK-21/WRK-28/WRK-23/IPC-30, why
IPC-23 stays In progress (proto-comment/doc wave pending), and the verification
evidence — macOS NonWindows build + validator tests, and the documented windev
path (scripts/ci/windev-worker-ci.ps1 -Mode test) at a256560: x86 Worker build
clean, Worker.Tests 367 passed / 0 failed / 11 skipped.
PipePair runs both ends of a duplex pipe in one process with blocking
FlushFileBuffers under every frame write, so it wedges after roughly 85 large
round trips. Drain the full 10,000 byte-heavy events to empty at the queue layer,
where the no-loss property actually lives, and keep the pipe walk at 1,000 events
(29 replies) so it still proves the split end to end. Also give the truncation
test's budget slack: item handle 0 is a proto3 default and is not serialized, so
the probe measurement is a lower bound on the fixture's per-event cost.
WRK-21 — DrainEvents was bounded by event count only, so a byte-heavy queue
(large string/array MxValues) built a reply above the negotiated frame maximum:
the writer rejected the frame, the exception unwound the session, and the events
already dequeued were destroyed. The drain is now byte-budgeted inside the queue
lock, so an event is dequeued only once it is known to fit and one that does not
stays at the head. Truncation is reported through the reply's existing
DiagnosticMessage (no contract change); callers drain until an empty reply. Both
reply-write seams — the control-command path and ProcessCommandAsync — now catch
MessageTooLarge and answer the correlation with an InvalidRequest reply instead
of unwinding or faulting the session. Satisfies IPC-23 R1-R3.
WRK-28 — the 10,000 drain ceiling moves to GatewayContractInfo
.MaxDrainEventsPerCommand, referenced by both the gateway request validator and
the worker clamp, replacing a comment-only sync contract. C# const only; no
.proto change.
WRK-23 — WorkerFrameWriter now peek-stamps, validates, then commits the sequence
counter immediately before the stream write, so a per-frame rejection leaves no
phantom gap on the wire.
IPC-30 — an oversized event frame stays session-fatal (it is undeliverable end to
end and neither dropping nor synthesizing a replacement is allowed), but the
death is structured: the event's identity and sizes are logged (never its value),
a WorkerFault with category PROTOCOL_VIOLATION and command method EventDrain is
written, then the session exits as before.
Docs updated in the same change: MxAccessWorkerInstanceDesign.md (drain byte cap,
truncation contract, oversized-head behavior, oversized-event policy, no control
reply is session-fatal on size), WorkerFrameProtocol.md (reply pre-sizing,
non-fatal reply-size rule, oversized-event policy, rejected frames do not consume
sequence numbers), gateway.md (DrainEvents two-axis bound).
WRK-06: MxStatusProxyConverter caches the four resolved FieldInfo per status
type in a static ConcurrentDictionary (the GetField metadata scan ran 4x per
status per event on the STA path). GetValue+Convert.ToInt32 still run per event
(late-bound RCW). Exceptions byte-identical: missing-field message unchanged
(ResolveField, not cached on throw via GetOrAdd); null-value message unchanged.
WRK-11: MxAccessEventQueue.Enqueue takes ownership of the passed MxEvent -
stamps WorkerSequence/WorkerTimestamp on it in place and enqueues it, no
Clone(). Audited all 3 callers (base/alarm event sinks, provider-mode handler):
each builds a fresh event per Enqueue, none reuse it. MxAccessValueCache.Set now
deep-copies its retained Value/SourceTimestamp/Statuses so the cache snapshot
never aliases the queue-owned (later serialized) event. Net: alarm/other events
clone nothing (was full clone); data-change clones payload-only.
WRK-12: WorkerFrameWriter coalesces the flush across a drained batch - each
frame is written but not flushed individually; one FlushAsync after the batch,
then all written frames complete. Preserves the written+flushed completion
contract; a burst of N events costs 1 flush, not N. On write failure the whole
in-flight batch + queue fail so no caller hangs.
IPC-15 (doc): the multi-event WorkerEnvelope body remains unimplemented (wire
still carries one event per worker_event frame); gateway.md Performance section
now distinguishes the shipped flush-coalescing from that deferred proto change.
net48-safe (no init/records; readonly struct cache entry). Worker builds x86
only - verification on windev. Tests added: converter cache-reuse, queue
ownership-transfer, value-cache snapshot independence, writer batch-flush-once.
Claude-Session: https://claude.ai/code/session_01DMXXvNuPekkkrTEyPNxEkW
Apply the ZB.MOM.WW. prefix to all gateway-side projects, folders,
.csproj/.sln contents, C# namespaces, using directives, generated proto
C# (csharp_namespace + checked-in generated files), InternalsVisibleTo
attributes, project-name string literals (LoadProject, .sln lookups,
worker exe paths, staticwebassets manifest), and the install/script/doc
references that point at any of the above. Migrate the solution from
.sln to .slnx via `dotnet sln migrate` and delete the old file.
External-runtime identifiers are intentionally NOT prefixed so external
configuration keeps working:
- GatewayMetrics.cs MeterName ("MxGateway.Server")
- DashboardAuthenticationDefaults Scheme/Policy ("MxGateway.Dashboard")
- GatewayRequestLoggingMiddleware logger category ("MxGateway.Request")
- StaRuntime thread name ("MxGateway.Worker.STA")
- appsettings.json root section "MxGateway" + env-var prefix
MxGateway__... and secret-name MxGateway:ApiKeyPepper
- C:\ProgramData\MxGateway\ data dir paths
Also fixes two tests that were not rename-related but became visible
while validating the rename:
- WorkerLiveMxAccessSmokeTests.ShutDownAsync: cancellation that the
gateway service correctly maps to RpcException(Cancelled) per gRPC
convention was being misclassified as a stream fault. Added a sibling
catch on RpcException with StatusCode.Cancelled.
- IntegrationTestEnvironment.ResolveRepositoryRoot: extracted IsRepositoryRoot
and made it accept either a .git marker OR a .sln/.slnx next to src/
so the worker-exe walker works in non-git working copies.
clients/proto/proto-inputs.json's protoRoot updated to point at
src/ZB.MOM.WW.MxGateway.Contracts/Protos.
Verified by `dotnet build` and a full `dotnet test` of the .slnx with
MXGATEWAY_RUN_LIVE_{MXACCESS,LDAP,GALAXY}_TESTS=1:
Tests: 472/472 pass
Worker.Tests: 280/280 pass (4 dev-rig [Fact(Skip=...)] skipped)
IntegrationTests: 18/18 pass
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Joseph Doherty