lmxopcua/docs/DriverLifecycle.md

Driver Lifecycle & Server Infrastructure Contracts

Reference for the server-side infrastructure interfaces that surround a driver but are not driver capabilities (read/write/subscribe/etc., documented in ReadWriteOperations.md and the per-driver pages). These contracts live in src/Core/ZB.MOM.WW.OtOpcUa.Core.Abstractions/ so they carry no behavior — concrete implementations live in the driver projects, the Runtime, and the ControlPlane. Each subsection below gives the purpose, the key members, and where it is implemented/used.

The capability interfaces a driver opts into (IReadable, IWritable, ITagDiscovery, ISubscribable, IAlarmSource, IHistoryProvider, IHostConnectivityProbe, IPerCallHostResolver, IRediscoverable) are covered elsewhere and discovered by the server via is-checks on the IDriver instance. The interfaces here are the plumbing the server uses to create, probe, supervise, report on, and configure those drivers, plus the server-side historian read surface.

---

IDriverFactory — creating drivers from config rows

Core.Abstractions/IDriverFactory.cs

Abstraction over the process-wide driver registry. The Runtime consumes this instead of the concrete registry so the Runtime project does not pull in ZB.MOM.WW.OtOpcUa.Core (which would drag in Polly + driver hosting).

Members:

• IDriver? TryCreate(string driverType, string driverInstanceId, string driverConfigJson) — returns a new driver for the given type, or null when no factory is registered for that type (missing assembly, typo). The DriverHostActor logs and skips the row rather than failing the whole apply.
• IReadOnlyCollection<string> SupportedTypes — driver-type names this factory can materialise; mostly for diagnostics and logs.

Implementations:

• NullDriverFactory (same file) returns null from every TryCreate and exposes zero supported types. Bound when no concrete driver assemblies have been registered (Mac dev path, smoke tests); the deployment becomes a no-op.
• DriverFactoryRegistry (Core/Hosting/DriverFactoryRegistry.cs) is the real process-singleton registry keyed by DriverInstance.DriverType (case-insensitive). Each driver project ships a Register(...) extension; Register records the factory and the driver's stability DriverTier (defaults to Tier A). Registering the same type twice throws.
• DriverFactoryRegistryAdapter (Core/Hosting/DriverFactoryRegistryAdapter.cs) bridges the registry to the IDriverFactory abstraction.

Wiring: DriverFactoryBootstrap.AddOtOpcUaDriverFactories (Host/Drivers/DriverFactoryBootstrap.cs) registers the singleton registry, runs every driver assembly's Register extension, then binds IDriverFactory to the adapter. It must run before AddAkka so the Runtime can resolve IDriverFactory when spawning the DriverHostActor (Runtime/Drivers/DriverHostActor.cs). The registry is skipped on admin-only nodes (they never run drivers); the probe set is the exception — see IDriverProbe.

---

IDriverProbe — Test Connect

Core.Abstractions/IDriverProbe.cs

A cheap test-connect probe for one driver type, backing the AdminUI Test Connect button. An implementation deserializes a driver-config JSON, attempts a cheap connection (TCP open, OPC UA session, gRPC ping — whatever the driver's native protocol supports), and reports success/failure with latency. Probes must not mutate persistent state: the AdminUI invokes them against the transient config in the typed form, not against the persisted DriverInstance row.

Members:

• string DriverType { get; } — the DriverInstance.DriverType string this probe handles; used for DI lookup.
• Task<DriverProbeResult> ProbeAsync(string configJson, TimeSpan timeout, CancellationToken ct) — never throws on connection failure; returns a result with Ok = false and a message instead.
• DriverProbeResult(bool Ok, string? Message, TimeSpan? Latency) — outcome record (Message is null on success; Latency is null on failure).

Implementations: every driver ships a *DriverProbe in its driver project (e.g. Driver.Modbus/ModbusDriverProbe.cs does a bare socket open/close). The historian backend is the external HistorianGateway (consumed as a gRPC client package, not an IDriver), so it has no driver probe.

Flow: the AdminUI's AdminProbeService (AdminUI/Clients/AdminProbeService.cs) dispatches a TestDriverConnect message through IAdminOperationsClient to the cluster-singleton AdminOperationsActor (ControlPlane/AdminOperations/AdminOperationsActor.cs), which holds the probes keyed by DriverType and invokes the matching one (timeout clamped to [1, 60] seconds). Because the admin singleton is admin-pinned, the probe set must be registered on admin nodes too — Program.cs calls AddOtOpcUaDriverProbes in the hasAdmin block, and AddOtOpcUaDriverFactories registers it for fused admin+driver nodes.

---

IDriverSupervisor / process recycle — REMOVED (Gitea #522)

IDriverSupervisor, MemoryRecycle, MemoryTracking and ScheduledRecycleScheduler no longer exist. This section used to describe them as the Tier C protection layer.

They were removed because the thing they acted on is gone. "Tier C" meant a driver running out-of-process behind a supervisor that could restart its Host without tearing down the OPC UA session or co-hosted drivers. No such process remains anywhere: Galaxy reaches MXAccess over gRPC to the external mxaccessgw sidecar (PR 7.2 retired the in-process Galaxy.Host / Proxy / Shared projects), and FOCAS has run in-process since its managed wire client landed 2026-04-24. Consistent with that, IDriverSupervisor had zero implementations, and MemoryTracking / MemoryRecycle / ScheduledRecycleScheduler were constructed only in their own unit tests — so this was not dormant-but-ready code, it was code with no path to running.

The operator-facing half went too: RecycleIntervalSeconds was authorable through the AdminUI's driver resilience section and validated by the parser while configuring nothing. A stored ResilienceConfig still carrying the key parses cleanly (unknown keys are ignored) and the AdminUI preserves it rather than silently rewriting an operator's config.

DriverTier itself survives and is load-bearing — do not delete it while following this note. DriverResilienceOptions.GetTierDefaults(tier) supplies the real per-capability timeout / retry / breaker policies, resolved via DriverFactoryRegistry.GetTier and applied by DriverCapabilityInvokerFactory. Every driver runs Tier A because no factory passes a tier, so today that means one uniform policy set.

IDriver no longer carries GetMemoryFootprint() or FlushOptionalCachesAsync() (Gitea #525). They existed to feed MemoryTracking, deleted with the rest of the driver-tier recycle machinery in #522; after that nothing called them, and their doc-comments still claimed Core polled the footprint every 30 s, which had not been true since v3. The sweep removed them from the interface, all 12 drivers, and every test stub, along with the support code that existed only to feed them — MTConnect's per-entry byte weights and its cached data-item count, OpcUaClient's _discoveredNodeCount, and MQTT's per-tag byte estimate.

Two consequences worth knowing:

• AbCipTemplateCache now has no production reset path. Its only caller was AB CIP's flush — which itself had no caller, so nothing has actually changed in behaviour, only in how visible the fact is. A UDT redefined on a live controller keeps its stale shape until the driver instance is rebuilt.
• MTConnect's /probe cache is still dropped, by InvalidateProbeModel() on an Agent restart. The tests that used to reach it through the flush now drive that path instead, so they cover a case that actually occurs.

If per-driver memory protection is wanted again, build it for the architecture as it is now: a process-wide watchdog that can ask drivers to flush, not a per-driver tier whose only remedy requires a supervisor that cannot exist in-process. The deleted per-driver implementations are in git history and were mostly reusable — what was always missing is the trigger.

---

What a (re)spawn re-provisions

A driver child can come into existence by three routes, and until 2026-08-20 only the first of them handed the child everything it needs to be a working driver. That is archreview 03/S16 (and its worse half, 03/S6): a child that exists without its desired subscription set is a dead driver — it connects, reports Connected, publishes nothing and raises no alarms, and the #488 periodic reconcile cannot rescue it (it early-returns on an empty desired set). The fix makes the desired set part of what it means to have a child rather than a later step in the apply pipeline.

DriverHostActor._desiredByDriver is the single authority. It is a per-driver (ValueRefs, AlarmRefs) pair, cleared and repopulated whole on every apply in the same pass that rebuilds the routing maps — keyed over the union of the value-ref map, the alarm-ref map and the running _children, so a driver with no authored tags gets an explicit empty set rather than being absent. Everything that hands a child a SetDesiredSubscriptions goes through the one helper SendDesiredSubscriptions(actor, driverId). (An empty set is meaningful, not a no-op to skip: the child routes it to Unsubscribe, dropping a stale handle.)

Route	Trigger	What re-provisions it
Deploy reconcile	ApplyDriverSpecs → SpawnChild	SpawnChild sends InitializeRequested then the desired set; the apply's bulk push then sends the (freshly rebuilt) set to every child.
Operator Restart	/hosts → Restart → HandleRestartDriver	Stops the child, respawns from the cached spec — and SpawnChild sends the desired set, because it always does. This is the 03/S16 fix: there is no bulk push on this path, and before it the respawned child subscribed to nothing until the next deployment.
Supervision restart	a child throws ⇒ Akka's default decider ⇒ Restart	DriverInstanceActor.PostRestart Tells the host ReprovisionRequested; HandleReprovisionRequested logs a Warning naming the crash type, re-sends InitializeRequested (non-stub children) and the desired set.
Force Reconnect	/hosts → Force Reconnect → HandleReconnectDriver	Nothing — verified. It Tells ForceReconnect to the same child actor, so the instance and its _desiredRefs/_desiredAlarmRefs survive and the reconnect's Connected entry re-applies them itself. Pinned by Force_reconnect_keeps_the_desired_set_and_re_subscribes so a future edit to the restart paths cannot break the one that was already correct.

Things to know before touching any of this:

• ⚠️ The supervision route is the invisible one, and it was the worst. There is no SupervisorStrategy anywhere under src/Server, so a child that throws gets Akka's default Restart. A restart recreates the actor object around the same IDriver — the Props closure captured it — and its PreRestart runs PostStop, which calls IDriver.ShutdownAsync. It does not run SpawnChild, and the child's IActorRef is unchanged, so the host had no notification a new incarnation existed at all. Net effect before the hook: the child sat in Connecting forever around a shut-down driver, with its desired set gone, and nothing logged the non-recovery.
• Replacing the default decider is deliberately out of scope. A Stop directive would silently remove a driver; a bounded retry count would silently stop one after N crashes. Both change failure semantics for every driver in the fleet and deserve their own plan and live gate. The reprovision hook makes the current infinite-restart behaviour correct instead of dead.
• ⚠️ …which is exactly why the reprovision is RATE-LIMITED. The default decider restarts a faulting child immediately and without limit, and the hook now makes every one of those restarts do ShutdownAsync + InitializeAsync + SubscribeAsync — so a driver that faults on every value would hammer its device as fast as it can crash. DriverHostActor keeps a per-driver last-reprovision stamp and holds anything inside DefaultReprovisionBackoff (10 s, matched to DriverInstanceActor.DefaultReconnectInterval because it drives the same connect work). The held request is deferred, not dropped — one StartSingleTimer per driver, so a burst collapses to a single pending reprovision — because dropping it would leave a child whose final crash fell inside the window un-provisioned forever, which is the 03/S16 failure this hook exists to close. Each deferral logs a Warning naming the crash type, so a crash loop is visible rather than merely quiet.
• A reprovision is routed by INCARNATION, not by driver id. ReprovisionRequested is delivered asynchronously, so one can still be in flight from an old incarnation after HandleRestartDriver stopped that child and spawned a replacement under the same id. Delivered to the new child — which is in Connecting, where InitializeRequested is handled — it would start a second, concurrent InitializeAsync, racing the dispose-before-overwrite that #527's teardown exists to serialise (ModbusDriver._transport / MqttDriver._connection each leak a transport on that race). The handler therefore checks Sender against the child it currently holds and drops anything else; the deferred path carries the original ref so the same check still applies when the timer re-delivers it.
• Ordering on a respawning deploy, and its one accepted cost. ApplyDriverSpecs (which spawns) runs before the pass that rebuilds _desiredByDriver, so a child respawned by a deploy — raw tags are folded into the merged DriverConfig, so a tag-set edit changes the spec and trips the #516 config respawn — is first handed the previous apply's set, then the new one by the bulk push. Akka's per-pair ordering guarantees it converges; it does not guarantee the transient is inert, because the child runs concurrently with the rest of the apply handler and a fast-initialising driver can reach Connected and subscribe the stale set first. The cost is one extra subscribe round-trip (HandleSubscribeAsync drops the prior subscription before establishing the new one); a real device driver, whose initialise opens a socket, rarely wins that race. Withholding the spawn-time send to avoid it would simply restore 03/S16, since the Restart and supervision routes have no bulk push coming.
• ⚠️ Convergence is not free on the ALARM side, and "a subscription already exists" is the wrong guard there. The value path converges by construction — StoreDesiredSubscriptions is a full replace and HandleSubscribeAsync drops the prior subscription before establishing the new one — but SubscribeDesiredAlarms / HandleSubscribeAlarmsAsync used to gate purely on _alarmSubscriptionHandle is not null, so once a handle existed the alarm set latched for the life of the connection. Combined with the transient above, a deploy widening a driver's alarm refs {X} → {X, Y} could leave a fast-initialising driver subscribed to {X} forever, and the drivers that filter their feed on the subscribed sourceNodeIds (OPC UA Client, AB CIP, FOCAS) would simply never deliver the new alarm — silently. The guard is now "the desired refs differ from the ones the live handle was established with" (_subscribedAlarmRefs), and a changed set releases the old subscription before re-subscribing so a filtering driver does not accumulate two overlapping ones. There is still deliberately no unsubscribe-on-empty: a removed alarm tag's condition node is torn down on the address-space rebuild and ForwardNativeAlarm drops any transition whose ConditionId no longer maps.
• Restart tests must assert a FUNCTION, never existence. RestartDriver_respawns_the_child_without_an_actor_name_collision asserts only that a child exists after a restart, and it passed green against the dead driver 03/S16 describes. It is kept — its own subject, the InvalidActorNameException, is real — but the load-bearing suite is DriverHostActorRestartTests, which asserts that the new incarnation subscribed and re-initialised. Its file remarks also record the supervision crash seam and why the obvious alternatives (a throwing health publisher, a throwing SubscribeAsync, Kill.Instance) do not work.

---

IDriverHealthPublisher — health pub/sub sink

Core.Abstractions/IDriverHealthPublisher.cs

A sink for driver-health state-change notifications. Implementations must be non-blocking and safe to call from any thread.

Member:

• void Publish(string clusterId, string driverInstanceId, DriverHealth health, int errorCount5Min)

Implementations:

• NullDriverHealthPublisher (same file) is the drop-in no-op for tests and dev-stub paths. A DriverInstanceActor defaults to it when no publisher is supplied.
• AkkaDriverHealthPublisher (Runtime/Drivers/AkkaDriverHealthPublisher.cs) is the production binding: it forwards each transition as a DriverHealthChanged message onto the cluster-wide driver-health Akka DistributedPubSub topic.

Producer: DriverInstanceActor (Runtime/Drivers/DriverInstanceActor.cs) calls Publish when a driver's health transitions. The published snapshot is consumed AdminUI-side and surfaced through the driver-status panel (read in-process by the AdminUI bridge rather than dialing its own hub).

Writing health around a teardown (Gitea #517)

Two rules, and the second is the counter-intuitive one:

1. GetHealth() must report actual state, never a constant. A hard-coded Healthy reports a healthy driver before initialize and after shutdown alike. CalculationDriver did exactly this — it was the fleet's one driver reporting Healthy with its timers stopped, deterministically rather than as a race. A driver with no transport still has a running / not-running distinction.

2. Land the terminal health value after the teardown — and, where the window is observable, write it before as well. #517's original suggestion was to move the write earlier so the race window leans conservative. Moving it is wrong: teardown drains in-flight poll/probe loops, and those loops write health as they unwind, so a driver that only wrote first could have a late loop overwrite the shutdown state with Healthy and leave that as the resting value — with every connection closed. The safe shape is a bracket: conservative value before, terminal value after.

Where the window is actually observable is worth knowing before adding brackets everywhere:

Path	Caller	Can GetHealth() land mid-teardown?
ShutdownAsync	DriverInstanceActor.PostStop	No — actor thread, after the mailbox drains, so the health poll is serialised against it.
InitializeAsync failure	DriverInstanceActor.InitializeAsync	Yes — invoked on a fire-and-forget Task.Run, so the health-poll tick keeps calling GetHealth() throughout.

So a driver whose InitializeAsync disposes anything on its failure path must bracket; only MTConnectDriver does today, because it is the only one that tears down inside a catch. The shutdown paths deliberately keep the single trailing write.

The comms-loss watchdog (Gitea #527) — GetHealth() is now load-bearing

GetHealth() used to be reporting-only: DriverInstanceActor.PublishHealthSnapshot read it every 30 s and forwarded it to the AdminUI, and nothing ever acted on a driver that reported itself unhealthy. That left DisconnectObserved with no production sender at all — the only paths into Reconnecting were a failed initial connect and an operator's Force Reconnect. A driver that connected and then lost its device stayed Connected forever: publishing Bad for every tag, never re-initialising, and not recovering when the device came back (live-confirmed against a stopped Modbus fixture, which needed a node restart). Both comms-loss quality paths — #477's native-condition annotation and #481's scripted-alarm input fan-out — hang off ConnectivityChanged, so both were wired to a signal that never fired.

The Connected-state health tick now also evaluates a watchdog, and self-sends DisconnectObserved when both of these hold:

1. the driver reports a state other than Healthy, and
2. DriverHealth.LastSuccessfulRead has not advanced for DefaultCommsLossTimeout (90 s = three ticks), measured from the later of that read stamp and the current Connected entry (see "the grace is per connection" below).

The conjunction is the whole design, and "non-Healthy for N polls" is the wrong rule. Degraded means connected but some data is bad — the enum says so. Several drivers publish health per tag inside their read loop (ModbusDriver.ReadAsync writes Healthy or Degraded once per reference), so a single unreadable address leaves the driver latched Degraded whenever it happens to be read last, indefinitely, against a device that is perfectly reachable. A state-only watchdog would tear that driver down every 90 s forever — strictly worse than the bug it fixes. LastSuccessfulRead is the honest liveness evidence: every driver advances it on any successful read and preserves it across Degraded/Faulted writes, so one bad tag among good ones keeps it moving while a device that is genuinely gone freezes it. The state check is still needed as the second conjunct, because a Healthy driver with nothing subscribed legitimately never reads and must not be declared dead for being idle. Both halves are pinned by their own test in DriverInstanceActorCommsLossWatchdogTests, each of which goes red when the other conjunct is deleted.

The grace is per CONNECTION — the baseline is max(LastSuccessfulRead, connectedSince), not LastSuccessfulRead ?? connectedSince (archreview 03/S17, fixed 2026-08-20). The two spellings differ for exactly the case that matters, and the ?? one collapsed the grace to a single health tick. Because LastSuccessfulRead is preserved across Degraded/Faulted writes — that preservation is the design described above — a device that accepts a TCP connection but never serves data (a half-broken PLC, a wrong unit id, a firewalled read path) reconnects carrying a read stamp frozen from before the outage, already far older than the threshold. Measuring from that stamp alone re-trips on the first tick of every new connection, so the reconnect cycle ran at health-tick cadence (~30 s in production) rather than at the designed 90 s. Taking the later of the two gives each connection its own full window, which is what re-stamping connectedSince on every Connected entry was always for; ?? only ever helped a driver that had never read at all, and the max still covers that case.

What this does not change: the conjunction, the disable-at-zero hatch, and a driver that stops reading within a stable connection (its read stamp is the later term, so it still trips on schedule measured from that read). And it paces the half-broken-device cycle rather than ending it — expect at most one reconnect attempt per threshold per connection, not silence. Pinned by A_reconnected_driver_gets_a_full_grace_window_before_the_watchdog_trips_again (the delay) and A_half_broken_device_is_still_declared_lost_once_the_grace_elapses (the anti-vacuity half — without it, a "fix" that simply disabled the watchdog after the first connection would look correct).

Two consequences worth knowing:

• CalculationDriver can never trip it, correctly. It reports Healthy whenever it is running and has no transport to be degraded about. Every other driver reaches a non-Healthy state on sustained failure: the nine poll drivers via Degraded, MQTT via its live connection state, Galaxy via its reconnect supervisor. This was surveyed across all 12 before relying on it — it is the assumption the whole mechanism rests on.
• A device that accepts a connection but serves no data will cycle, reconnecting once per threshold. That is the correct reading of a broken device, it is rate-limited, and it is visible in the health snapshot's error count — but do not mistake it for a bug when reading logs.
• ⚠️ "Reaches a non-Healthy state" is an obligation on each driver, and a driver can fail to meet it without failing anything. Galaxy's entry in the survey above is "via its reconnect supervisor" — which holds only for the paths that actually reach the supervisor. Its event stream could also end the way a closed or evicted gateway session ends it: the gRPC call completes without an error, so nothing throws, the supervisor was never told, health stayed Healthy — and a Healthy driver can never satisfy conjunct 1, so the watchdog could not fire either. The driver went permanently deaf with nothing reporting it anywhere (fixed in EventPump; see Galaxy.md §Operational Notes). The general shape is worth carrying to the next driver: this watchdog only covers failures a driver notices, so a silent-success termination path — a stream that ends cleanly, a poll loop that exits without throwing — bypasses it entirely.

The reconnect retry now tears down before re-initialising. Reconnecting's RetryConnect calls ShutdownAsync before InitializeAsync — the sequence every driver's own ReinitializeAsync already uses — because several drivers overwrite an IAsyncDisposable transport field inside InitializeAsync without disposing the previous one (ModbusDriver._transport, MqttDriver._connection). Re-initialising without a teardown leaks one socket per attempt. That was latent while only a manual Force Reconnect re-entered this path; the watchdog makes it automatic and unbounded, so a device down for an hour would have leaked ~360 transports at the 10 s retry interval. The shutdown is best-effort: a driver that throws on it still gets its initialise attempt.

The fan-out that watchdog triggers: indexed per driver, and one batch

DisconnectObserved raises ConnectivityChanged, and DriverHostActor answers it by pushing BadNoCommunication at every ref the flapping driver owns — the value fan to the dependency mux, and the alarm fan to the publish actor's condition quality. Both used to answer "which refs are this driver's?" by scanning the node's entire ref map and filtering — the maps are keyed by the composite (DriverInstanceId, RawPath), so one driver's flap walked all ~50k keys on a large node to find its own few thousand. Each now has a secondary index, DriverInstanceId → [(RawPath, node set)] (_valueRefsByDriver, _alarmRefsByDriver), so the fan touches only that driver's refs.

The index cannot drift from its primary, because it is never maintained incrementally: both are cleared and rebuilt whole inside ApplyDesiredSubscriptions, in the same pass and the same clear as the maps they index. Two details are load-bearing if you touch that loop — an entry is added only on set creation (so a repeated (DriverInstanceId, RawPath) contributes exactly one), and the node HashSet is held by reference, not copied, so nodes registered against the same raw tag later in the same pass (a UNS reference variable, say) are visible through the index with no second bookkeeping step.

⚠️ The value fan is now a single message. It sends one DriverInstanceActor.AttributeValueBatchPublished carrying one item per RawPath, where it previously sent one AttributeValuePublished per ref — 5 000 messages onto the mux that also carries the node's steady value ingress, every time one driver flapped. Delivery is unchanged: the mux filters the batch per item against the same registered-interest map the per-value receive consulted, so only the framing moved. The alarm fan is indexed but deliberately not batched — one driver ref can back several condition NodeIds, so it still emits one AlarmQualityUpdate per condition.

Consequence worth knowing: AttributeValuePublished now has no production sender at all. This fan was its last one — everything on the subscription path was already wrapped in AttributeValueBatchPublished. DependencyMuxActor still registers the per-value receive, but in production it is dead code; it stays for tests and direct senders.

The connect path feeds the circuit breaker (R2-10 T10 closure)

IDriver.InitializeAsync is routed through the capability invoker as DriverCapability.Initialize, keyed on the driver-instance id (init spans the whole driver, like a bulk subscribe). Before this, the connect path was the ONE capability call the invoker never saw: a driver that could not connect contributed zero breaker input, so the AdminUI resilience panel read "All targets healthy" against a dead endpoint — live-proven during the R2-10 T10 gate, and the reason that gate was structurally unsatisfiable for a year of attempts. Things to know before touching it:

• The Initialize policy never retries — this actor's RetryConnect timer is the retry loop, and pipeline retries would stack inside each timer tick (and stretch one attempt past the timer interval so attempts overlap). The parser forces a retryCount override back to 0, same funnel as the write-shaped rule.
• ⚠️ The breaker threshold is 2, and raising it silently re-breaks the feature. The breaker samples over 30 s and the reconnect timer fires every 10 s, so at most three init attempts fit one sampling window — a Read-sized threshold of 5 can literally never open on connect failures, which reads exactly like "the panel doesn't work" with nothing logged. Pinned by Initialize_BreakerThreshold_IsReachableAtTheReconnectCadence and, behaviourally, by Initialize_BreakerOpens_AtTierDefaults_AndFastFailsTheNextAttempt.
• An open breaker cannot wedge the reconnect loop. A fast-failed attempt (BrokenCircuitException) lands in the same catch as a real connect failure → InitializeFailed → the timer keeps ticking. The 15 s break window is shorter than two 10 s ticks, so recovery costs at most one extra tick. The teardown ShutdownAsync stays deliberately UNWRAPPED — best-effort cleanup of an already-dead transport must not count toward the breaker.
• A respawn resets the instance's tracker snapshots (DriverResilienceStatusTracker.Invalidate, called by DriverCapabilityInvokerFactory.Create alongside the pipeline invalidation). The pipelines carry the actual breaker state; once they are discarded, a retained "Breaker OPEN" snapshot could never self-correct — only the discarded pipeline's OnClosed stamps the close — so a deploy during an outage would otherwise strand a false OPEN chip forever. This was unreachable while breakers never opened; the Initialize wrap made it reachable.
• ConsecutiveFailures stays 0 during a connect outage by design — the tracker counts retry attempts, and Initialize has none. The breaker-OPEN chip is the operator signal.

---

IDriverConfigEditor — custom AdminUI config editor (plug-point)

Core.Abstractions/IDriverConfigEditor.cs

An optional plug-point a driver can implement to provide a custom AdminUI editor for its DriverConfig JSON. Drivers that don't implement it fall back to the generic JSON editor with schema-driven validation. This is the contract between the driver and the Admin Blazor app; the Admin app discovers implementations and slots them into the Driver Detail screen.

Members:

• string DriverType { get; } — the driver type this editor handles.
• Type EditorComponentType { get; } — the Razor component type that renders the editor (returned as Type so Core.Abstractions needs no Blazor reference).

Status: this is a forward-looking plug-point. No driver ships a concrete IDriverConfigEditor today — every driver uses the generic JSON editor — so the interface currently has the contract defined but no implementations.

---

IHistorianDataSource — server-side historian read surface

Core.Abstractions/Historian/IHistorianDataSource.cs

The server-side historian read surface. Registered with the server's history router and resolved per OPC UA namespace, independent of any driver's lifecycle. This is distinct from the driver capability IHistoryProvider:

• IHistoryProvider is a driver capability — the server dispatches to it via the driver instance.
• IHistorianDataSource is a server registration — the server resolves it by namespace and calls it directly, so one historian (the HistorianGateway) can serve many drivers' nodes, and drivers can restart without dropping history availability.

The interface is : IDisposable and declares the full read surface as required members (unlike IHistoryProvider, where at-time/event reads are optional default-impl methods so legacy drivers can stay raw-only):

• ReadRawAsync(fullReference, startUtc, endUtc, maxValuesPerNode, ct) — raw historical samples over a time range.
• ReadProcessedAsync(fullReference, startUtc, endUtc, interval, aggregate, ct) — interval-bucketed aggregates (average/min/max/count); an empty bucket returns a BadNoData sample.
• ReadAtTimeAsync(fullReference, timestampsUtc, ct) — one sample per requested timestamp (OPC UA HistoryReadAtTime); the returned list matches the requested length and order, gaps as Bad-quality snapshots.
• ReadEventsAsync(sourceName, startUtc, endUtc, maxEvents, ct) — historical alarm/event records (OPC UA HistoryReadEvents); sourceName is null to return all sources. maxEvents is a signed int so a non-positive value is a "use the backend's default cap" sentinel.
• GetHealthSnapshot() — point-in-time health snapshot for diagnostics and dashboards; pure observation, never blocks on backend I/O.

All values use the shared DataValueSnapshot / HistoricalEvent shapes; backend-specific quality/type encodings are translated to OPC UA StatusCode uints inside the data source.

Implementation:

• GatewayHistorianDataSource (Driver.Historian.Gateway/GatewayHistorianDataSource.cs) — the read backend that talks gRPC to the external ZB.MOM.WW.HistorianGateway (via the ZB.MOM.WW.HistorianGateway.Client package, behind the IHistorianGatewayClient seam). The alarm-event drain target is the separate GatewayAlarmHistorianWriter (the gateway SendEvent path; see AlarmHistorian.md).

The HistorianGateway is the sole historian backend; its config keys and deployment prerequisites are in Historian.md.

---

PollGroupEngine — poll pacing and teardown

src/Core/ZB.MOM.WW.OtOpcUa.Core.Abstractions/PollGroupEngine.cs

The shared poll loop behind the seven polling drivers (Modbus, S7, AbCip, AbLegacy, FOCAS, Sql, TwinCAT). Note it lives in Core.Abstractions, not under src/Drivers/.

Pacing is fixed-rate, not fixed-delay. The loop used to await Task.Delay(interval) after each poll, so the real cadence was interval + read time and drifted with device latency — an 80 ms read on a 100 ms interval produced a 180 ms cycle, and a subscription's configured publishing interval was a floor nobody actually got. Each poll is now timed (in a finally, so a failed poll is measured too) and the next wait is max(interval − elapsed, 0).

• An overrun does not skip a cycle and does not burst to catch up. When the remaining time is zero or negative the loop does not call Task.Delay at all — it does a Task.Yield(), re-checks cancellation, and starts the next poll immediately. The rate simply degrades to whatever the device sustains. The Yield is load-bearing: without it a synchronously-completing reader turns a zero delay into a thread-pool-starving tight loop that never observes cancellation.
• The failure path is exempt. When backoffCap is set and there have been consecutive failures, the capped exponential ConnectionBackoff.ComputeDelay wins outright — a dead device must not be hammered at fixed rate. (Previously the backoff formula was consulted whenever a cap was configured, including at zero failures where it just returns the base interval.)

OverrunCount is the signal that a device cannot keep up. It counts poll cycles whose measured duration exceeded that subscription's publishing interval, engine-wide across every subscription, monotonic and never reset. A non-zero and climbing value means the loop is already running flat out.

• ⚠️ It conflates a slow success with a slow failure — a poll that overran because the device was slow and one that overran because it timed out increment the same counter. Read it alongside the health snapshot's error count, not on its own.
• There is no meter and no log, because Core.Abstractions deliberately carries no metrics dependency. The surface is the OverrunCount property plus an optional onOverrun constructor callback. No driver wires either today — a driver-level meter is a recorded follow-up, so treat the counter as latent instrumentation rather than something you can read off a dashboard.

Unsubscribe is awaited, not blocked on. Unsubscribe drained the in-flight poll with a synchronous task.Wait(5s) — and every driver's UnsubscribeAsync called it and returned Task.CompletedTask, so that block landed inside a DriverInstanceActor mailbox turn, stalling the actor for up to five seconds. UnsubscribeAsync now awaits task.WaitAsync(DrainTimeout) instead. The synchronous Unsubscribe is retained for compatibility and has no production caller left; prefer the async form on any path inside an actor turn or a request pipeline. Semantics are identical either way — the loop is cancelled and awaited before the CTS is disposed, so no change callback fires after teardown and the CTS is never disposed while a Task.Delay still holds its token.

---

Commons — shared cross-cutting primitives

src/Core/ZB.MOM.WW.OtOpcUa.Commons/

ZB.MOM.WW.OtOpcUa.Commons is the low-level shared library that the Runtime, ControlPlane, AdminUI, and OPC UA server projects all reference. It holds cross-cutting primitives with no driver- or host-specific behavior, so the heavier projects can share message contracts and value types without taking a dependency on each other. It references only Akka and the internal ZB.MOM.WW.Audit package.

Folders:

• Messages/ — Akka message contracts grouped by concern (Admin, Alerts, Deploy, Drivers, Fleet, Logging, Redundancy). These are the wire/inter-actor messages — e.g. Messages/Admin/TestDriverConnect.cs (Test Connect request, see IDriverProbe) and Messages/Drivers/DriverHealthChanged.cs (the driver-health pub/sub payload, see IDriverHealthPublisher).
• Interfaces/ — cluster-facing client contracts such as IAdminOperationsClient, IClusterRoleInfo, and IFleetDiagnosticsClient.
• Types/ — strongly-typed identifier value types: CorrelationId, DeploymentId, ExecutionId, NodeId, RevisionHash.
• Browsing/ — live-browse abstractions (BrowseNode, IBrowseSession, IDriverBrowser) backing the AdminUI address pickers.
• Engines/ — evaluator seams (IScriptedAlarmEvaluator, IVirtualTagEvaluator, IAlarmActorStateStore) consumed by the VirtualTags / ScriptedAlarms engines.
• OpcUa/ — deferred-publish seams (IOpcUaAddressSpaceSink, IServiceLevelPublisher and their Deferred* no-op stand-ins) so address-space and ServiceLevel writes can be wired late.
• Observability/ — OtOpcUaTelemetry (the shared ActivitySource/metrics surface).

---

See also

• ReadWriteOperations.md — the driver capability interfaces (read/write/subscribe) and resilience pipeline.
• ServiceHosting.md — role gating, the Akka cluster, and the external HistorianGateway backend.
• AlarmHistorian.md — the store-and-forward SQLite alarm sink that drains to IAlarmHistorianWriter.
• Redundancy.md — driver stability tiers in the redundancy context.