Files
Joseph Doherty
6c5b202910
TwinCAT follow-up — Native ADS notifications for ISubscribable. Closes task #189 — upgrades TwinCATDriver's subscription path from polling (shared PollGroupEngine) to native AdsClient.AddDeviceNotificationExAsync so the PLC pushes changes on its own cycle rather than the driver polling. Strictly better for latency + CPU — TC2 and TC3 runtimes notify on value change with sub-millisecond latency from the PLC cycle. ITwinCATClient gains AddNotificationAsync — takes symbolPath + TwinCATDataType + optional bitIndex + cycleTime + onChange callback + CancellationToken; returns an ITwinCATNotificationHandle whose Dispose tears the notification down on the wire. Bit-within-word reads supported — the parent word value arrives via the notification, driver extracts the bit before invoking the callback (same ExtractBit path as the read surface from PR 2). AdsTwinCATClient — subscribes to AdsClient.AdsNotificationEx in the ctor, maintains a ConcurrentDictionary<uint, NotificationRegistration> keyed on the server-side notification handle. AddDeviceNotificationExAsync returns Task<ResultHandle> with Handle + ErrorCode; non-NoError throws InvalidOperationException so the driver can catch + retry. Notification event args carry Handle + Value + DataType; lookup in _notifications dict routes the value through any bit-extraction + calls the consumer callback. Consumer-side exceptions are swallowed so a misbehaving callback can't crash the ADS notification thread. Dispose unsubscribes from AdsNotificationEx + clears the dict + disposes AdsClient. NotificationRegistration is ITwinCATNotificationHandle — Dispose fires DeleteDeviceNotificationAsync as fire-and-forget with CancellationToken.None (caller has already committed to teardown; blocking would slow shutdown). TwinCATDriverOptions.UseNativeNotifications — new bool, default true. When true the driver uses native notifications; when false it falls through to the shared PollGroupEngine (same semantics as other libplctag-backed drivers, also a safety valve for targets with notification limits). TwinCATDriver.SubscribeAsync dual-path — if UseNativeNotifications false delegate into _poll.Subscribe (unchanged behavior from PR 3). If true, iterate fullReferences, resolve each to its device's client via EnsureConnectedAsync (reuses PR 2's per-device connection cache), parse the SymbolPath via TwinCATSymbolPath (preserves bit-in-word support), call ITwinCATClient.AddNotificationAsync with a closure over the FullReference (not the ADS symbol — OPC UA subscribers addressed the driver-side name). Per-registration callback bridges (_, value) → OnDataChange event with a fresh DataValueSnapshot (Good status, current UtcNow timestamps). Any mid-registration failure triggers a try/catch that disposes every already-registered handle before rethrowing, keeping the driver in a clean never-existed state rather than half-registered. UnsubscribeAsync dispatches on handle type — NativeSubscriptionHandle disposes all its cached ITwinCATNotificationHandles; anything else delegates to _poll.Unsubscribe for the poll fallback. ShutdownAsync tears down native subs first (so AdsClient-level cleanup happens before the client itself disposes), then PollGroupEngine, then per-device probe CTS + client. NativeSubscriptionHandle DiagnosticId prefixes with twincat-native-sub- so Admin UI + logs can distinguish the paths. 9 new unit tests in TwinCATNativeNotificationTests — native subscribe registers one notification per tag, pushed value via FireNotification fires OnDataChange with the right FullReference (driver-side, not ADS symbol), unsubscribe disposes all notifications, unsubscribe halts future notifications, partial-failure cleanup via FailAfterNAddsFake (first succeeds, second throws → first gets torn down + Notifications count returns to 0 + AddCallCount=2 proving the test actually exercised both calls), shutdown disposes subscriptions, poll fallback works when UseNativeNotifications=false (no native handles created + initial-data push still fires), handle DiagnosticId distinguishes native vs poll. Existing poll-mode ISubscribable tests in TwinCATCapabilityTests updated with UseNativeNotifications=false so they continue testing the poll path specifically — both poll + native paths have test coverage now. TwinCATDriverTests got Probe.Enabled=false added because the default factory creates a real AdsClient which was flakily affected by parallel test execution sharing AMS router state. Total TwinCAT unit tests now 93/93 passing (+8 from PR 3's 85 counting the new native tests + 2 existing tests that got options tweaks). Full solution builds 0 errors; Modbus / AbCip / AbLegacy / other drivers untouched. TwinCAT driver is now feature-complete end-to-end — read / write / discover / native-subscribe / probe / host-resolve, with poll-mode as a safety valve. Unblocks closing task #120 for TwinCAT; remaining sub-task: FOCAS + task #188 (symbol-browsing — lower priority than FOCAS since real config flows still use pre-declared tags).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
TwinCAT follow-up — Native ADS notifications for ISubscribable. Closes task #189 — upgrades TwinCATDriver's subscription path from polling (shared PollGroupEngine) to native AdsClient.AddDeviceNotificationExAsync so the PLC pushes changes on its own cycle rather than the driver polling. Strictly better for latency + CPU — TC2 and TC3 runtimes notify on value change with sub-millisecond latency from the PLC cycle. ITwinCATClient gains AddNotificationAsync — takes symbolPath + TwinCATDataType + optional bitIndex + cycleTime + onChange callback + CancellationToken; returns an ITwinCATNotificationHandle whose Dispose tears the notification down on the wire. Bit-within-word reads supported — the parent word value arrives via the notification, driver extracts the bit before invoking the callback (same ExtractBit path as the read surface from PR 2). AdsTwinCATClient — subscribes to AdsClient.AdsNotificationEx in the ctor, maintains a ConcurrentDictionary<uint, NotificationRegistration> keyed on the server-side notification handle. AddDeviceNotificationExAsync returns Task<ResultHandle> with Handle + ErrorCode; non-NoError throws InvalidOperationException so the driver can catch + retry. Notification event args carry Handle + Value + DataType; lookup in _notifications dict routes the value through any bit-extraction + calls the consumer callback. Consumer-side exceptions are swallowed so a misbehaving callback can't crash the ADS notification thread. Dispose unsubscribes from AdsNotificationEx + clears the dict + disposes AdsClient. NotificationRegistration is ITwinCATNotificationHandle — Dispose fires DeleteDeviceNotificationAsync as fire-and-forget with CancellationToken.None (caller has already committed to teardown; blocking would slow shutdown). TwinCATDriverOptions.UseNativeNotifications — new bool, default true. When true the driver uses native notifications; when false it falls through to the shared PollGroupEngine (same semantics as other libplctag-backed drivers, also a safety valve for targets with notification limits). TwinCATDriver.SubscribeAsync dual-path — if UseNativeNotifications false delegate into _poll.Subscribe (unchanged behavior from PR 3). If true, iterate fullReferences, resolve each to its device's client via EnsureConnectedAsync (reuses PR 2's per-device connection cache), parse the SymbolPath via TwinCATSymbolPath (preserves bit-in-word support), call ITwinCATClient.AddNotificationAsync with a closure over the FullReference (not the ADS symbol — OPC UA subscribers addressed the driver-side name). Per-registration callback bridges (_, value) → OnDataChange event with a fresh DataValueSnapshot (Good status, current UtcNow timestamps). Any mid-registration failure triggers a try/catch that disposes every already-registered handle before rethrowing, keeping the driver in a clean never-existed state rather than half-registered. UnsubscribeAsync dispatches on handle type — NativeSubscriptionHandle disposes all its cached ITwinCATNotificationHandles; anything else delegates to _poll.Unsubscribe for the poll fallback. ShutdownAsync tears down native subs first (so AdsClient-level cleanup happens before the client itself disposes), then PollGroupEngine, then per-device probe CTS + client. NativeSubscriptionHandle DiagnosticId prefixes with twincat-native-sub- so Admin UI + logs can distinguish the paths. 9 new unit tests in TwinCATNativeNotificationTests — native subscribe registers one notification per tag, pushed value via FireNotification fires OnDataChange with the right FullReference (driver-side, not ADS symbol), unsubscribe disposes all notifications, unsubscribe halts future notifications, partial-failure cleanup via FailAfterNAddsFake (first succeeds, second throws → first gets torn down + Notifications count returns to 0 + AddCallCount=2 proving the test actually exercised both calls), shutdown disposes subscriptions, poll fallback works when UseNativeNotifications=false (no native handles created + initial-data push still fires), handle DiagnosticId distinguishes native vs poll. Existing poll-mode ISubscribable tests in TwinCATCapabilityTests updated with UseNativeNotifications=false so they continue testing the poll path specifically — both poll + native paths have test coverage now. TwinCATDriverTests got Probe.Enabled=false added because the default factory creates a real AdsClient which was flakily affected by parallel test execution sharing AMS router state. Total TwinCAT unit tests now 93/93 passing (+8 from PR 3's 85 counting the new native tests + 2 existing tests that got options tweaks). Full solution builds 0 errors; Modbus / AbCip / AbLegacy / other drivers untouched. TwinCAT driver is now feature-complete end-to-end — read / write / discover / native-subscribe / probe / host-resolve, with poll-mode as a safety valve. Unblocks closing task #120 for TwinCAT; remaining sub-task: FOCAS + task #188 (symbol-browsing — lower priority than FOCAS since real config flows still use pre-declared tags).
TwinCAT follow-up — Native ADS notifications for ISubscribable. Closes task #189 — upgrades TwinCATDriver's subscription path from polling (shared PollGroupEngine) to native AdsClient.AddDeviceNotificationExAsync so the PLC pushes changes on its own cycle rather than the driver polling. Strictly better for latency + CPU — TC2 and TC3 runtimes notify on value change with sub-millisecond latency from the PLC cycle. ITwinCATClient gains AddNotificationAsync — takes symbolPath + TwinCATDataType + optional bitIndex + cycleTime + onChange callback + CancellationToken; returns an ITwinCATNotificationHandle whose Dispose tears the notification down on the wire. Bit-within-word reads supported — the parent word value arrives via the notification, driver extracts the bit before invoking the callback (same ExtractBit path as the read surface from PR 2). AdsTwinCATClient — subscribes to AdsClient.AdsNotificationEx in the ctor, maintains a ConcurrentDictionary<uint, NotificationRegistration> keyed on the server-side notification handle. AddDeviceNotificationExAsync returns Task<ResultHandle> with Handle + ErrorCode; non-NoError throws InvalidOperationException so the driver can catch + retry. Notification event args carry Handle + Value + DataType; lookup in _notifications dict routes the value through any bit-extraction + calls the consumer callback. Consumer-side exceptions are swallowed so a misbehaving callback can't crash the ADS notification thread. Dispose unsubscribes from AdsNotificationEx + clears the dict + disposes AdsClient. NotificationRegistration is ITwinCATNotificationHandle — Dispose fires DeleteDeviceNotificationAsync as fire-and-forget with CancellationToken.None (caller has already committed to teardown; blocking would slow shutdown). TwinCATDriverOptions.UseNativeNotifications — new bool, default true. When true the driver uses native notifications; when false it falls through to the shared PollGroupEngine (same semantics as other libplctag-backed drivers, also a safety valve for targets with notification limits). TwinCATDriver.SubscribeAsync dual-path — if UseNativeNotifications false delegate into _poll.Subscribe (unchanged behavior from PR 3). If true, iterate fullReferences, resolve each to its device's client via EnsureConnectedAsync (reuses PR 2's per-device connection cache), parse the SymbolPath via TwinCATSymbolPath (preserves bit-in-word support), call ITwinCATClient.AddNotificationAsync with a closure over the FullReference (not the ADS symbol — OPC UA subscribers addressed the driver-side name). Per-registration callback bridges (_, value) → OnDataChange event with a fresh DataValueSnapshot (Good status, current UtcNow timestamps). Any mid-registration failure triggers a try/catch that disposes every already-registered handle before rethrowing, keeping the driver in a clean never-existed state rather than half-registered. UnsubscribeAsync dispatches on handle type — NativeSubscriptionHandle disposes all its cached ITwinCATNotificationHandles; anything else delegates to _poll.Unsubscribe for the poll fallback. ShutdownAsync tears down native subs first (so AdsClient-level cleanup happens before the client itself disposes), then PollGroupEngine, then per-device probe CTS + client. NativeSubscriptionHandle DiagnosticId prefixes with twincat-native-sub- so Admin UI + logs can distinguish the paths. 9 new unit tests in TwinCATNativeNotificationTests — native subscribe registers one notification per tag, pushed value via FireNotification fires OnDataChange with the right FullReference (driver-side, not ADS symbol), unsubscribe disposes all notifications, unsubscribe halts future notifications, partial-failure cleanup via FailAfterNAddsFake (first succeeds, second throws → first gets torn down + Notifications count returns to 0 + AddCallCount=2 proving the test actually exercised both calls), shutdown disposes subscriptions, poll fallback works when UseNativeNotifications=false (no native handles created + initial-data push still fires), handle DiagnosticId distinguishes native vs poll. Existing poll-mode ISubscribable tests in TwinCATCapabilityTests updated with UseNativeNotifications=false so they continue testing the poll path specifically — both poll + native paths have test coverage now. TwinCATDriverTests got Probe.Enabled=false added because the default factory creates a real AdsClient which was flakily affected by parallel test execution sharing AMS router state. Total TwinCAT unit tests now 93/93 passing (+8 from PR 3's 85 counting the new native tests + 2 existing tests that got options tweaks). Full solution builds 0 errors; Modbus / AbCip / AbLegacy / other drivers untouched. TwinCAT driver is now feature-complete end-to-end — read / write / discover / native-subscribe / probe / host-resolve, with poll-mode as a safety valve. Unblocks closing task #120 for TwinCAT; remaining sub-task: FOCAS + task #188 (symbol-browsing — lower priority than FOCAS since real config flows still use pre-declared tags).
TwinCAT follow-up — Native ADS notifications for ISubscribable. Closes task #189 — upgrades TwinCATDriver's subscription path from polling (shared PollGroupEngine) to native AdsClient.AddDeviceNotificationExAsync so the PLC pushes changes on its own cycle rather than the driver polling. Strictly better for latency + CPU — TC2 and TC3 runtimes notify on value change with sub-millisecond latency from the PLC cycle. ITwinCATClient gains AddNotificationAsync — takes symbolPath + TwinCATDataType + optional bitIndex + cycleTime + onChange callback + CancellationToken; returns an ITwinCATNotificationHandle whose Dispose tears the notification down on the wire. Bit-within-word reads supported — the parent word value arrives via the notification, driver extracts the bit before invoking the callback (same ExtractBit path as the read surface from PR 2). AdsTwinCATClient — subscribes to AdsClient.AdsNotificationEx in the ctor, maintains a ConcurrentDictionary<uint, NotificationRegistration> keyed on the server-side notification handle. AddDeviceNotificationExAsync returns Task<ResultHandle> with Handle + ErrorCode; non-NoError throws InvalidOperationException so the driver can catch + retry. Notification event args carry Handle + Value + DataType; lookup in _notifications dict routes the value through any bit-extraction + calls the consumer callback. Consumer-side exceptions are swallowed so a misbehaving callback can't crash the ADS notification thread. Dispose unsubscribes from AdsNotificationEx + clears the dict + disposes AdsClient. NotificationRegistration is ITwinCATNotificationHandle — Dispose fires DeleteDeviceNotificationAsync as fire-and-forget with CancellationToken.None (caller has already committed to teardown; blocking would slow shutdown). TwinCATDriverOptions.UseNativeNotifications — new bool, default true. When true the driver uses native notifications; when false it falls through to the shared PollGroupEngine (same semantics as other libplctag-backed drivers, also a safety valve for targets with notification limits). TwinCATDriver.SubscribeAsync dual-path — if UseNativeNotifications false delegate into _poll.Subscribe (unchanged behavior from PR 3). If true, iterate fullReferences, resolve each to its device's client via EnsureConnectedAsync (reuses PR 2's per-device connection cache), parse the SymbolPath via TwinCATSymbolPath (preserves bit-in-word support), call ITwinCATClient.AddNotificationAsync with a closure over the FullReference (not the ADS symbol — OPC UA subscribers addressed the driver-side name). Per-registration callback bridges (_, value) → OnDataChange event with a fresh DataValueSnapshot (Good status, current UtcNow timestamps). Any mid-registration failure triggers a try/catch that disposes every already-registered handle before rethrowing, keeping the driver in a clean never-existed state rather than half-registered. UnsubscribeAsync dispatches on handle type — NativeSubscriptionHandle disposes all its cached ITwinCATNotificationHandles; anything else delegates to _poll.Unsubscribe for the poll fallback. ShutdownAsync tears down native subs first (so AdsClient-level cleanup happens before the client itself disposes), then PollGroupEngine, then per-device probe CTS + client. NativeSubscriptionHandle DiagnosticId prefixes with twincat-native-sub- so Admin UI + logs can distinguish the paths. 9 new unit tests in TwinCATNativeNotificationTests — native subscribe registers one notification per tag, pushed value via FireNotification fires OnDataChange with the right FullReference (driver-side, not ADS symbol), unsubscribe disposes all notifications, unsubscribe halts future notifications, partial-failure cleanup via FailAfterNAddsFake (first succeeds, second throws → first gets torn down + Notifications count returns to 0 + AddCallCount=2 proving the test actually exercised both calls), shutdown disposes subscriptions, poll fallback works when UseNativeNotifications=false (no native handles created + initial-data push still fires), handle DiagnosticId distinguishes native vs poll. Existing poll-mode ISubscribable tests in TwinCATCapabilityTests updated with UseNativeNotifications=false so they continue testing the poll path specifically — both poll + native paths have test coverage now. TwinCATDriverTests got Probe.Enabled=false added because the default factory creates a real AdsClient which was flakily affected by parallel test execution sharing AMS router state. Total TwinCAT unit tests now 93/93 passing (+8 from PR 3's 85 counting the new native tests + 2 existing tests that got options tweaks). Full solution builds 0 errors; Modbus / AbCip / AbLegacy / other drivers untouched. TwinCAT driver is now feature-complete end-to-end — read / write / discover / native-subscribe / probe / host-resolve, with poll-mode as a safety valve. Unblocks closing task #120 for TwinCAT; remaining sub-task: FOCAS + task #188 (symbol-browsing — lower priority than FOCAS since real config flows still use pre-declared tags).
TwinCAT follow-up — Native ADS notifications for ISubscribable. Closes task #189 — upgrades TwinCATDriver's subscription path from polling (shared PollGroupEngine) to native AdsClient.AddDeviceNotificationExAsync so the PLC pushes changes on its own cycle rather than the driver polling. Strictly better for latency + CPU — TC2 and TC3 runtimes notify on value change with sub-millisecond latency from the PLC cycle. ITwinCATClient gains AddNotificationAsync — takes symbolPath + TwinCATDataType + optional bitIndex + cycleTime + onChange callback + CancellationToken; returns an ITwinCATNotificationHandle whose Dispose tears the notification down on the wire. Bit-within-word reads supported — the parent word value arrives via the notification, driver extracts the bit before invoking the callback (same ExtractBit path as the read surface from PR 2). AdsTwinCATClient — subscribes to AdsClient.AdsNotificationEx in the ctor, maintains a ConcurrentDictionary<uint, NotificationRegistration> keyed on the server-side notification handle. AddDeviceNotificationExAsync returns Task<ResultHandle> with Handle + ErrorCode; non-NoError throws InvalidOperationException so the driver can catch + retry. Notification event args carry Handle + Value + DataType; lookup in _notifications dict routes the value through any bit-extraction + calls the consumer callback. Consumer-side exceptions are swallowed so a misbehaving callback can't crash the ADS notification thread. Dispose unsubscribes from AdsNotificationEx + clears the dict + disposes AdsClient. NotificationRegistration is ITwinCATNotificationHandle — Dispose fires DeleteDeviceNotificationAsync as fire-and-forget with CancellationToken.None (caller has already committed to teardown; blocking would slow shutdown). TwinCATDriverOptions.UseNativeNotifications — new bool, default true. When true the driver uses native notifications; when false it falls through to the shared PollGroupEngine (same semantics as other libplctag-backed drivers, also a safety valve for targets with notification limits). TwinCATDriver.SubscribeAsync dual-path — if UseNativeNotifications false delegate into _poll.Subscribe (unchanged behavior from PR 3). If true, iterate fullReferences, resolve each to its device's client via EnsureConnectedAsync (reuses PR 2's per-device connection cache), parse the SymbolPath via TwinCATSymbolPath (preserves bit-in-word support), call ITwinCATClient.AddNotificationAsync with a closure over the FullReference (not the ADS symbol — OPC UA subscribers addressed the driver-side name). Per-registration callback bridges (_, value) → OnDataChange event with a fresh DataValueSnapshot (Good status, current UtcNow timestamps). Any mid-registration failure triggers a try/catch that disposes every already-registered handle before rethrowing, keeping the driver in a clean never-existed state rather than half-registered. UnsubscribeAsync dispatches on handle type — NativeSubscriptionHandle disposes all its cached ITwinCATNotificationHandles; anything else delegates to _poll.Unsubscribe for the poll fallback. ShutdownAsync tears down native subs first (so AdsClient-level cleanup happens before the client itself disposes), then PollGroupEngine, then per-device probe CTS + client. NativeSubscriptionHandle DiagnosticId prefixes with twincat-native-sub- so Admin UI + logs can distinguish the paths. 9 new unit tests in TwinCATNativeNotificationTests — native subscribe registers one notification per tag, pushed value via FireNotification fires OnDataChange with the right FullReference (driver-side, not ADS symbol), unsubscribe disposes all notifications, unsubscribe halts future notifications, partial-failure cleanup via FailAfterNAddsFake (first succeeds, second throws → first gets torn down + Notifications count returns to 0 + AddCallCount=2 proving the test actually exercised both calls), shutdown disposes subscriptions, poll fallback works when UseNativeNotifications=false (no native handles created + initial-data push still fires), handle DiagnosticId distinguishes native vs poll. Existing poll-mode ISubscribable tests in TwinCATCapabilityTests updated with UseNativeNotifications=false so they continue testing the poll path specifically — both poll + native paths have test coverage now. TwinCATDriverTests got Probe.Enabled=false added because the default factory creates a real AdsClient which was flakily affected by parallel test execution sharing AMS router state. Total TwinCAT unit tests now 93/93 passing (+8 from PR 3's 85 counting the new native tests + 2 existing tests that got options tweaks). Full solution builds 0 errors; Modbus / AbCip / AbLegacy / other drivers untouched. TwinCAT driver is now feature-complete end-to-end — read / write / discover / native-subscribe / probe / host-resolve, with poll-mode as a safety valve. Unblocks closing task #120 for TwinCAT; remaining sub-task: FOCAS + task #188 (symbol-browsing — lower priority than FOCAS since real config flows still use pre-declared tags).
TwinCAT PR 2 — IReadable + IWritable. ITwinCATClient + ITwinCATClientFactory abstraction — one client per AMS target, reused across reads/writes/probes. Shape differs from AbCip/AbLegacy where libplctag handles are per-tag — TwinCAT's AdsClient is a single connection with symbolic reads/writes issued against it, so the abstraction is coarser. AdsTwinCATClient is the default implementation wrapping Beckhoff.TwinCAT.Ads's AdsClient — ConnectAsync calls AdsClient.Connect(AmsNetId.Parse(netId), port) after setting Timeout in ms; ReadValueAsync dispatches TwinCATDataType to the CLR Type via MapToClrType (bool/sbyte/byte/short/ushort/int/uint/long/ulong/float/double/string/uint for time types) and calls AdsClient.ReadValueAsync(symbol, type, ct) which returns ResultAnyValue; unwraps .Value + .ErrorCode and maps non-NoError codes via TwinCATStatusMapper.MapAdsError. BOOL-within-word reads extract the bit after the underlying word read using ExtractBit over short/ushort/int/uint/long/ulong. WriteValueAsync converts the boxed value via ConvertForWrite (Convert.ToXxx per type) then calls AdsClient.WriteValueAsync returning ResultWrite; checks .ErrorCode for status mapping. BOOL-within-word writes throw NotSupportedException with a pointer to task #181 — same RMW gap as Modbus BitInRegister / AbCip BOOL-in-DINT / AbLegacy bit-within-N-file. ProbeAsync calls AdsClient.ReadStateAsync + checks AdsErrorCode.NoError. TwinCATDriver implements IReadable + IWritable — per-device ITwinCATClient cached in DeviceState.Client, lazy-connected on first read/write via EnsureConnectedAsync, connect-failure path disposes + clears the client so next call re-attempts cleanly. ReadAsync ordered-snapshot pattern matching AbCip/AbLegacy: unknown ref → BadNodeIdUnknown, unknown device → BadNodeIdUnknown, OperationCanceledException rethrow, any other exception → BadCommunicationError + Degraded health. WriteAsync similar — non-Writable tag → BadNotWritable upfront, NotSupportedException → BadNotSupported, FormatException/InvalidCastException (guard pattern) → BadTypeMismatch, OverflowException → BadOutOfRange, generic → BadCommunicationError. Symbol name resolution goes through TwinCATSymbolPath.TryParse(def.SymbolPath) with fallback to the raw def.SymbolPath if the path doesn't parse — the Beckhoff AdsClient handles the final validation at wire time. ShutdownAsync disposes each device's client. 14 new unit tests in TwinCATReadWriteTests using FakeTwinCATClient + FakeTwinCATClientFactory — unknown ref → BadNodeIdUnknown, successful DInt read with Good status + captured value + IsConnected=true after EnsureConnectedAsync, repeat reads reuse the connection (one Connect + multiple reads), ADS error code mapping via FakeTwinCATClient.ReadStatuses, read exception → BadCommunicationError + Degraded health, connect exception disposes the client, batched reads preserve order across DInt/Real/String types, non-Writable rejection, successful write logs symbol+type+value+bit for test inspection, write status-code mapping, write exception → BadCommunicationError, batch preserves order across success/non-writable/unknown, cancellation propagation, ShutdownAsync disposes the client. Total TwinCAT unit tests now 75/75 passing (+14 from PR 1's 61); full solution builds 0 errors; Modbus / AbCip / AbLegacy / other drivers untouched.