Files
Joseph Doherty
d4c1873998
Phase 3 PR 59 -- MelsecAddress helper for MELSEC X/Y hex-vs-octal family trap + D/M bank bases. Adds MelsecAddress static class with XInputToDiscrete, YOutputToCoil, MRelayToCoil, DRegisterToHolding helpers and a MelsecFamily enum {Q_L_iQR, F_iQF} that drives whether X/Y addresses are parsed as hex (Q-series convention) or octal (FX-series convention). This is the #1 MELSEC driver bug source per docs/v2/mitsubishi.md: the string 'X20' on a MELSEC-Q means DI 32 (hex 0x20) while the same string on an FX3U means DI 16 (octal 0o20). The helper forces the caller to name the family explicitly; no 'sensible default' because wrong defaults just move the bug. Key design decisions: (1) Family is an enum argument, not a helper-level static-selector, because real deployments have BOTH Q-series and FX-series PLCs on the same gateway -- one driver instance per device means family must be per-tag, not per-driver. (2) Bank base is a ushort argument defaulting to 0. Real QJ71MT91/LJ71MT91 assignment blocks commonly place X at DI 8192+, Y at coil 8192+, etc. to leave the low-address range for D-registers; the helper takes the site's configured base as runtime config rather than a compile-time constant. Matches the 'driver opt-in per tag' pattern DirectLogicAddress established for DL260. (3) M-relay and D-register are DECIMAL on every MELSEC family -- docs explicitly; the MELSEC confusion is only about X/Y, not about data registers or internal relays. Helpers reject non-numeric M/D addresses and honor bank bases the same way. (4) Parser walks digits manually for both hex and octal (instead of int.Parse with NumberStyles) so non-hex / non-octal characters give a clear ArgumentException with the offending char + family name. Prevents a subtle class of bugs where int.Parse('X20', Hex) silently returns 32 even for F_iQF callers. Unit tests (MelsecAddressTests, 34 facts): XInputToDiscrete_QLiQR_parses_hex theory (X0, X9, XA, XF, X10, X20, X1FF + lowercase); XInputToDiscrete_FiQF_parses_octal theory (X0, X7, X10, X20, X777); YOutputToCoil equivalents; Same_address_string_decodes_differently_between_families (the headline trap, X20 => 32 on Q vs 16 on FX); reject-non-octal / reject-non-hex / reject-empty / overflow facts; honors-bank-base for X and M and D. 176/176 Modbus.Tests pass (143 prior + 34 new Melsec). No driver core changes -- this is purely a new helper class in the Driver.Modbus project. PR 60 wires it into integration tests against the mitsubishi pymodbus profile.
Phase 3 PR 34 — Host-status publisher (Server) + /hosts drill-down page (Admin). Closes LMX follow-up #7 by wiring together the data layer from PR 33. Server.HostStatusPublisher is a BackgroundService that walks every driver registered in DriverHost every 10 seconds, skips drivers that don't implement IHostConnectivityProbe, calls GetHostStatuses() on each probe-capable driver, and upserts one DriverHostStatus row per (NodeId, DriverInstanceId, HostName) into the central config DB. Upsert path: SingleOrDefaultAsync on the composite PK; if no row exists, Add a new one; if a row exists, LastSeenUtc advances unconditionally (heartbeat) and State + StateChangedUtc update only on transitions so Admin UI can distinguish 'still reporting, still Running' from 'freshly transitioned to Running'. MapState translates Core.Abstractions.HostState to Configuration.Enums.DriverHostState (intentional duplicate enum — Configuration project stays free of driver-runtime deps per PR 33's choice). If a driver's GetHostStatuses throws, log warning and skip that driver this tick — never take down the Server on a publisher failure. If the DB is unreachable, log warning + retry next heartbeat (no buffering — next tick's current-state snapshot is more useful than replaying stale transitions after a long outage). 2-second startup delay so NodeBootstrap's RegisterAsync calls land before the first publish tick, then tick runs immediately so a freshly-started Server surfaces its host topology in the Admin UI without waiting a full interval.
Phase 3 PR 33 — DriverHostStatus entity + EF migration (data-layer for LMX #7). New DriverHostStatus entity with composite key (NodeId, DriverInstanceId, HostName) persists each server node's per-host connectivity view — one row per (server node, driver instance, probe-reported host), which means a redundant 2-node cluster with one Galaxy driver reporting 3 platforms produces 6 rows because each server node owns its own runtime view of the shared host topology, not 3. Fields: NodeId (64), DriverInstanceId (64), HostName (256 — fits Galaxy FQDNs and Modbus host:port strings), State (DriverHostState enum — Unknown/Running/Stopped/Faulted, persisted as nvarchar(16) via HasConversion<string> so DBAs inspecting the table see readable state names not ordinals), StateChangedUtc + LastSeenUtc (datetime2(3) — StateChangedUtc tracks actual transitions while LastSeenUtc advances on every publisher heartbeat so the Admin UI can flag stale rows from a crashed Server independent of State), Detail (nullable 1024 — exception message from the driver's probe when Faulted, null otherwise).
Phase 3 PR 59 -- MelsecAddress helper for MELSEC X/Y hex-vs-octal family trap + D/M bank bases. Adds MelsecAddress static class with XInputToDiscrete, YOutputToCoil, MRelayToCoil, DRegisterToHolding helpers and a MelsecFamily enum {Q_L_iQR, F_iQF} that drives whether X/Y addresses are parsed as hex (Q-series convention) or octal (FX-series convention). This is the #1 MELSEC driver bug source per docs/v2/mitsubishi.md: the string 'X20' on a MELSEC-Q means DI 32 (hex 0x20) while the same string on an FX3U means DI 16 (octal 0o20). The helper forces the caller to name the family explicitly; no 'sensible default' because wrong defaults just move the bug. Key design decisions: (1) Family is an enum argument, not a helper-level static-selector, because real deployments have BOTH Q-series and FX-series PLCs on the same gateway -- one driver instance per device means family must be per-tag, not per-driver. (2) Bank base is a ushort argument defaulting to 0. Real QJ71MT91/LJ71MT91 assignment blocks commonly place X at DI 8192+, Y at coil 8192+, etc. to leave the low-address range for D-registers; the helper takes the site's configured base as runtime config rather than a compile-time constant. Matches the 'driver opt-in per tag' pattern DirectLogicAddress established for DL260. (3) M-relay and D-register are DECIMAL on every MELSEC family -- docs explicitly; the MELSEC confusion is only about X/Y, not about data registers or internal relays. Helpers reject non-numeric M/D addresses and honor bank bases the same way. (4) Parser walks digits manually for both hex and octal (instead of int.Parse with NumberStyles) so non-hex / non-octal characters give a clear ArgumentException with the offending char + family name. Prevents a subtle class of bugs where int.Parse('X20', Hex) silently returns 32 even for F_iQF callers. Unit tests (MelsecAddressTests, 34 facts): XInputToDiscrete_QLiQR_parses_hex theory (X0, X9, XA, XF, X10, X20, X1FF + lowercase); XInputToDiscrete_FiQF_parses_octal theory (X0, X7, X10, X20, X777); YOutputToCoil equivalents; Same_address_string_decodes_differently_between_families (the headline trap, X20 => 32 on Q vs 16 on FX); reject-non-octal / reject-non-hex / reject-empty / overflow facts; honors-bank-base for X and M and D. 176/176 Modbus.Tests pass (143 prior + 34 new Melsec). No driver core changes -- this is purely a new helper class in the Driver.Modbus project. PR 60 wires it into integration tests against the mitsubishi pymodbus profile.
Phase 3 PR 38 — DriverNodeManager HistoryRead override (LMX #1 finish). Wires the OPC UA HistoryRead service through CustomNodeManager2's four protected per-kind hooks — HistoryReadRawModified / HistoryReadProcessed / HistoryReadAtTime / HistoryReadEvents — each dispatching to the driver's IHistoryProvider capability (PR 35 for ReadAtTime + ReadEvents on top of PR 19-era ReadRaw + ReadProcessed). Was the last missing piece of the end-to-end HistoryRead path: PR 10 + PR 11 shipped the Galaxy.Host IPC contracts, PR 35 surfaced them on IHistoryProvider + GalaxyProxyDriver, but no server-side handler bridged OPC UA HistoryRead service requests onto the capability interface. Now it does.