Files
lmxopcua/tests/ZB.MOM.WW.OtOpcUa.Driver.AbLegacy.Tests
Joseph Doherty b2424a0616 AB Legacy PR 2 — IReadable + IWritable. IAbLegacyTagRuntime + IAbLegacyTagFactory abstraction mirrors IAbCipTagRuntime from AbCip PR 3. LibplctagLegacyTagRuntime default implementation wraps libplctag.Tag with Protocol=ab_eip + PlcType dispatched from the profile's libplctag attribute (Slc500/MicroLogix/Plc5/LogixPccc) — libplctag routes PCCC-over-EIP internally based on PlcType, so our layer just forwards the atomic type to Get/Set calls. DecodeValue handles Bit (GetBit when bitIndex is set, else GetInt8!=0), Int/AnalogInt (GetInt16 widened to int), Long (GetInt32), Float (GetFloat32), String (GetString), TimerElement/CounterElement/ControlElement (GetInt32 — sub-element selection is in the libplctag tag name like T4:0.ACC, PLC-side decode picks the right slot). EncodeValue handles the same types; bit-within-word writes throw NotSupportedException pointing at follow-up task #181 (same read-modify-write gap as Modbus BitInRegister). AbLegacyDriver implements IReadable + IWritable with the exact same shape as AbCip PR 3-4 — per-tag lazy runtime init via EnsureTagRuntimeAsync cached in DeviceState.Runtimes dict, ordered-snapshot results, health surface updates. Exception table — OperationCanceledException rethrows, NotSupportedException → BadNotSupported, FormatException/InvalidCastException → BadTypeMismatch (guard pattern C# 11 syntax), OverflowException → BadOutOfRange, anything else → BadCommunicationError. ShutdownAsync disposes every cached runtime so the native tag handles get released. 14 new unit tests in AbLegacyReadWriteTests covering unknown ref → BadNodeIdUnknown, successful N-file read with Good status + captured value, repeat-read reuses cached runtime (init count 1 across 2 reads), libplctag non-zero status mapping (-14 → BadNodeIdUnknown), read exception → BadCommunicationError + Degraded health, batched reads preserve order across N/F/ST types, TagCreateParams composition (gateway/port/path/slc500 attribute/tag-name), non-writable tag → BadNotWritable, successful write encodes + flushes, bit-within-word → BadNotSupported (RmwThrowingFake mirrors LibplctagLegacyTagRuntime's runtime check), write exception → BadCommunicationError, batch preserves order across success+fail+unknown, cancellation propagates, ShutdownAsync disposes runtimes. Total AbLegacy unit tests now 82/82 passing (+14 from PR 1's 68). Full solution builds 0 errors; Modbus + AbCip + other drivers untouched.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
2026-04-19 17:58:38 -04:00
..
AB Legacy PR 1 — Scaffolding + Core (AbLegacyDriver + PCCC address parser). New Driver.AbLegacy project with the libplctag 1.5.2 reference + the same Core.Abstractions-only project shape AbCip uses. AbLegacyHostAddress duplicates the ab://gateway[:port]/cip-path parser from AbCip since PCCC-over-EIP uses the same gateway routing convention (SLC 500 direct-wired with empty path, PLC-5 bridged through a ControlLogix chassis with full CIP path). Parser is 30 lines; copy was cheaper than introducing a shared Ab* project just to avoid duplication. AbLegacyAddress handles PCCC file addressing — file-letter + optional file-number + colon + word-number + optional sub-element (.ACC / .PRE / .EN / .DN / .CU / .CD / .LEN / .POS / .ER) + optional /bit-index. Handles the full shape variety — N7:0 (integer file 7 word 0), F8:5 (float file 8 word 5), B3:0/0 (bit file 3 word 0 bit 0), ST9:0 (string file 9 string 0), L9:3 (long file SLC 5/05+), T4:0.ACC (timer accumulator), C5:2.CU (counter count-up bit), R6:0.LEN (control length), I:0/0 (input file bit — no file number for I/O/S), O:1/2 (output file bit), S:1 (status file word), N7:0/3 (bit within integer file). Validates file letters against the canonical SLC/ML/PLC-5 set (N/F/B/L/ST/T/C/R/I/O/S/A). ToLibplctagName roundtrips so the parsed value can be handed straight to libplctag's name= attribute. AbLegacyDataType — Bit / Int (N-file, 16-bit signed) / Long (L-file, 32-bit, SLC 5/05+ only) / Float (F-file, 32-bit IEEE-754) / AnalogInt (A-file) / String (ST-file, 82-byte fixed + length word) / TimerElement / CounterElement / ControlElement. ToDriverDataType widens Long to Int32 matching the Modbus/AbCip Int64-gap convention. AbLegacyStatusMapper shares the OPC UA status constants with AbCip (same numeric values, different namespace). MapLibplctagStatus mirrors AbCip — 0 success, positive pending, negative error code families. MapPcccStatus handles PCCC STS bytes — 0x00 success, 0x10 illegal command, 0x20 bad address, 0x30 protected, 0x40/0x50 busy, 0xF0 extended status. AbLegacyDriverOptions + AbLegacyDeviceOptions + AbLegacyTagDefinition + AbLegacyProbeOptions mirror AbCip shapes — one instance supports N devices via Devices list, Tags list references devices by HostAddress cross-key, Probe uses S:0 by default as the cheap probe address. AbLegacyPlcFamilyProfile for four families — Slc500 (slc500 attribute, 1,0 default path, supports L + ST files, 240B max PCCC packet), MicroLogix (micrologix attribute, empty path for direct EIP, supports ST but not L), Plc5 (plc5 attribute, 1,0 default path, supports ST but predates L), LogixPccc (logixpccc attribute, full Logix ConnectionSize + L file support via the PCCC compatibility layer on ControlLogix). AbLegacyDriver implements IDriver only — InitializeAsync parses each device's HostAddress and selects its profile (fails fast on malformed strings → Faulted health), per-device state with parsed address + options + profile + empty placeholder for PRs 2-3. ShutdownAsync clears the device dict. 68 new unit tests across 3 files — AbLegacyAddressTests (15 valid shapes + 10 invalid shapes + 7 ToLibplctagName roundtrip), AbLegacyHostAndStatusTests (4 valid host + 5 invalid host + 8 PCCC STS + 7 libplctag status), AbLegacyDriverTests (IDriver lifecycle + multi-device init with per-family profile selection + malformed-address fault + shutdown + family profile defaults + ForFamily theory + data-type mapping). Total project count 29 src + 18 tests; full solution builds 0 errors; Modbus + AbCip + other drivers untouched.
2026-04-19 17:54:25 -04:00
AB Legacy PR 1 — Scaffolding + Core (AbLegacyDriver + PCCC address parser). New Driver.AbLegacy project with the libplctag 1.5.2 reference + the same Core.Abstractions-only project shape AbCip uses. AbLegacyHostAddress duplicates the ab://gateway[:port]/cip-path parser from AbCip since PCCC-over-EIP uses the same gateway routing convention (SLC 500 direct-wired with empty path, PLC-5 bridged through a ControlLogix chassis with full CIP path). Parser is 30 lines; copy was cheaper than introducing a shared Ab* project just to avoid duplication. AbLegacyAddress handles PCCC file addressing — file-letter + optional file-number + colon + word-number + optional sub-element (.ACC / .PRE / .EN / .DN / .CU / .CD / .LEN / .POS / .ER) + optional /bit-index. Handles the full shape variety — N7:0 (integer file 7 word 0), F8:5 (float file 8 word 5), B3:0/0 (bit file 3 word 0 bit 0), ST9:0 (string file 9 string 0), L9:3 (long file SLC 5/05+), T4:0.ACC (timer accumulator), C5:2.CU (counter count-up bit), R6:0.LEN (control length), I:0/0 (input file bit — no file number for I/O/S), O:1/2 (output file bit), S:1 (status file word), N7:0/3 (bit within integer file). Validates file letters against the canonical SLC/ML/PLC-5 set (N/F/B/L/ST/T/C/R/I/O/S/A). ToLibplctagName roundtrips so the parsed value can be handed straight to libplctag's name= attribute. AbLegacyDataType — Bit / Int (N-file, 16-bit signed) / Long (L-file, 32-bit, SLC 5/05+ only) / Float (F-file, 32-bit IEEE-754) / AnalogInt (A-file) / String (ST-file, 82-byte fixed + length word) / TimerElement / CounterElement / ControlElement. ToDriverDataType widens Long to Int32 matching the Modbus/AbCip Int64-gap convention. AbLegacyStatusMapper shares the OPC UA status constants with AbCip (same numeric values, different namespace). MapLibplctagStatus mirrors AbCip — 0 success, positive pending, negative error code families. MapPcccStatus handles PCCC STS bytes — 0x00 success, 0x10 illegal command, 0x20 bad address, 0x30 protected, 0x40/0x50 busy, 0xF0 extended status. AbLegacyDriverOptions + AbLegacyDeviceOptions + AbLegacyTagDefinition + AbLegacyProbeOptions mirror AbCip shapes — one instance supports N devices via Devices list, Tags list references devices by HostAddress cross-key, Probe uses S:0 by default as the cheap probe address. AbLegacyPlcFamilyProfile for four families — Slc500 (slc500 attribute, 1,0 default path, supports L + ST files, 240B max PCCC packet), MicroLogix (micrologix attribute, empty path for direct EIP, supports ST but not L), Plc5 (plc5 attribute, 1,0 default path, supports ST but predates L), LogixPccc (logixpccc attribute, full Logix ConnectionSize + L file support via the PCCC compatibility layer on ControlLogix). AbLegacyDriver implements IDriver only — InitializeAsync parses each device's HostAddress and selects its profile (fails fast on malformed strings → Faulted health), per-device state with parsed address + options + profile + empty placeholder for PRs 2-3. ShutdownAsync clears the device dict. 68 new unit tests across 3 files — AbLegacyAddressTests (15 valid shapes + 10 invalid shapes + 7 ToLibplctagName roundtrip), AbLegacyHostAndStatusTests (4 valid host + 5 invalid host + 8 PCCC STS + 7 libplctag status), AbLegacyDriverTests (IDriver lifecycle + multi-device init with per-family profile selection + malformed-address fault + shutdown + family profile defaults + ForFamily theory + data-type mapping). Total project count 29 src + 18 tests; full solution builds 0 errors; Modbus + AbCip + other drivers untouched.
2026-04-19 17:54:25 -04:00
AB Legacy PR 1 — Scaffolding + Core (AbLegacyDriver + PCCC address parser). New Driver.AbLegacy project with the libplctag 1.5.2 reference + the same Core.Abstractions-only project shape AbCip uses. AbLegacyHostAddress duplicates the ab://gateway[:port]/cip-path parser from AbCip since PCCC-over-EIP uses the same gateway routing convention (SLC 500 direct-wired with empty path, PLC-5 bridged through a ControlLogix chassis with full CIP path). Parser is 30 lines; copy was cheaper than introducing a shared Ab* project just to avoid duplication. AbLegacyAddress handles PCCC file addressing — file-letter + optional file-number + colon + word-number + optional sub-element (.ACC / .PRE / .EN / .DN / .CU / .CD / .LEN / .POS / .ER) + optional /bit-index. Handles the full shape variety — N7:0 (integer file 7 word 0), F8:5 (float file 8 word 5), B3:0/0 (bit file 3 word 0 bit 0), ST9:0 (string file 9 string 0), L9:3 (long file SLC 5/05+), T4:0.ACC (timer accumulator), C5:2.CU (counter count-up bit), R6:0.LEN (control length), I:0/0 (input file bit — no file number for I/O/S), O:1/2 (output file bit), S:1 (status file word), N7:0/3 (bit within integer file). Validates file letters against the canonical SLC/ML/PLC-5 set (N/F/B/L/ST/T/C/R/I/O/S/A). ToLibplctagName roundtrips so the parsed value can be handed straight to libplctag's name= attribute. AbLegacyDataType — Bit / Int (N-file, 16-bit signed) / Long (L-file, 32-bit, SLC 5/05+ only) / Float (F-file, 32-bit IEEE-754) / AnalogInt (A-file) / String (ST-file, 82-byte fixed + length word) / TimerElement / CounterElement / ControlElement. ToDriverDataType widens Long to Int32 matching the Modbus/AbCip Int64-gap convention. AbLegacyStatusMapper shares the OPC UA status constants with AbCip (same numeric values, different namespace). MapLibplctagStatus mirrors AbCip — 0 success, positive pending, negative error code families. MapPcccStatus handles PCCC STS bytes — 0x00 success, 0x10 illegal command, 0x20 bad address, 0x30 protected, 0x40/0x50 busy, 0xF0 extended status. AbLegacyDriverOptions + AbLegacyDeviceOptions + AbLegacyTagDefinition + AbLegacyProbeOptions mirror AbCip shapes — one instance supports N devices via Devices list, Tags list references devices by HostAddress cross-key, Probe uses S:0 by default as the cheap probe address. AbLegacyPlcFamilyProfile for four families — Slc500 (slc500 attribute, 1,0 default path, supports L + ST files, 240B max PCCC packet), MicroLogix (micrologix attribute, empty path for direct EIP, supports ST but not L), Plc5 (plc5 attribute, 1,0 default path, supports ST but predates L), LogixPccc (logixpccc attribute, full Logix ConnectionSize + L file support via the PCCC compatibility layer on ControlLogix). AbLegacyDriver implements IDriver only — InitializeAsync parses each device's HostAddress and selects its profile (fails fast on malformed strings → Faulted health), per-device state with parsed address + options + profile + empty placeholder for PRs 2-3. ShutdownAsync clears the device dict. 68 new unit tests across 3 files — AbLegacyAddressTests (15 valid shapes + 10 invalid shapes + 7 ToLibplctagName roundtrip), AbLegacyHostAndStatusTests (4 valid host + 5 invalid host + 8 PCCC STS + 7 libplctag status), AbLegacyDriverTests (IDriver lifecycle + multi-device init with per-family profile selection + malformed-address fault + shutdown + family profile defaults + ForFamily theory + data-type mapping). Total project count 29 src + 18 tests; full solution builds 0 errors; Modbus + AbCip + other drivers untouched.
2026-04-19 17:54:25 -04:00
AB Legacy PR 2 — IReadable + IWritable. IAbLegacyTagRuntime + IAbLegacyTagFactory abstraction mirrors IAbCipTagRuntime from AbCip PR 3. LibplctagLegacyTagRuntime default implementation wraps libplctag.Tag with Protocol=ab_eip + PlcType dispatched from the profile's libplctag attribute (Slc500/MicroLogix/Plc5/LogixPccc) — libplctag routes PCCC-over-EIP internally based on PlcType, so our layer just forwards the atomic type to Get/Set calls. DecodeValue handles Bit (GetBit when bitIndex is set, else GetInt8!=0), Int/AnalogInt (GetInt16 widened to int), Long (GetInt32), Float (GetFloat32), String (GetString), TimerElement/CounterElement/ControlElement (GetInt32 — sub-element selection is in the libplctag tag name like T4:0.ACC, PLC-side decode picks the right slot). EncodeValue handles the same types; bit-within-word writes throw NotSupportedException pointing at follow-up task #181 (same read-modify-write gap as Modbus BitInRegister). AbLegacyDriver implements IReadable + IWritable with the exact same shape as AbCip PR 3-4 — per-tag lazy runtime init via EnsureTagRuntimeAsync cached in DeviceState.Runtimes dict, ordered-snapshot results, health surface updates. Exception table — OperationCanceledException rethrows, NotSupportedException → BadNotSupported, FormatException/InvalidCastException → BadTypeMismatch (guard pattern C# 11 syntax), OverflowException → BadOutOfRange, anything else → BadCommunicationError. ShutdownAsync disposes every cached runtime so the native tag handles get released. 14 new unit tests in AbLegacyReadWriteTests covering unknown ref → BadNodeIdUnknown, successful N-file read with Good status + captured value, repeat-read reuses cached runtime (init count 1 across 2 reads), libplctag non-zero status mapping (-14 → BadNodeIdUnknown), read exception → BadCommunicationError + Degraded health, batched reads preserve order across N/F/ST types, TagCreateParams composition (gateway/port/path/slc500 attribute/tag-name), non-writable tag → BadNotWritable, successful write encodes + flushes, bit-within-word → BadNotSupported (RmwThrowingFake mirrors LibplctagLegacyTagRuntime's runtime check), write exception → BadCommunicationError, batch preserves order across success+fail+unknown, cancellation propagates, ShutdownAsync disposes runtimes. Total AbLegacy unit tests now 82/82 passing (+14 from PR 1's 68). Full solution builds 0 errors; Modbus + AbCip + other drivers untouched.
2026-04-19 17:58:38 -04:00
AB Legacy PR 2 — IReadable + IWritable. IAbLegacyTagRuntime + IAbLegacyTagFactory abstraction mirrors IAbCipTagRuntime from AbCip PR 3. LibplctagLegacyTagRuntime default implementation wraps libplctag.Tag with Protocol=ab_eip + PlcType dispatched from the profile's libplctag attribute (Slc500/MicroLogix/Plc5/LogixPccc) — libplctag routes PCCC-over-EIP internally based on PlcType, so our layer just forwards the atomic type to Get/Set calls. DecodeValue handles Bit (GetBit when bitIndex is set, else GetInt8!=0), Int/AnalogInt (GetInt16 widened to int), Long (GetInt32), Float (GetFloat32), String (GetString), TimerElement/CounterElement/ControlElement (GetInt32 — sub-element selection is in the libplctag tag name like T4:0.ACC, PLC-side decode picks the right slot). EncodeValue handles the same types; bit-within-word writes throw NotSupportedException pointing at follow-up task #181 (same read-modify-write gap as Modbus BitInRegister). AbLegacyDriver implements IReadable + IWritable with the exact same shape as AbCip PR 3-4 — per-tag lazy runtime init via EnsureTagRuntimeAsync cached in DeviceState.Runtimes dict, ordered-snapshot results, health surface updates. Exception table — OperationCanceledException rethrows, NotSupportedException → BadNotSupported, FormatException/InvalidCastException → BadTypeMismatch (guard pattern C# 11 syntax), OverflowException → BadOutOfRange, anything else → BadCommunicationError. ShutdownAsync disposes every cached runtime so the native tag handles get released. 14 new unit tests in AbLegacyReadWriteTests covering unknown ref → BadNodeIdUnknown, successful N-file read with Good status + captured value, repeat-read reuses cached runtime (init count 1 across 2 reads), libplctag non-zero status mapping (-14 → BadNodeIdUnknown), read exception → BadCommunicationError + Degraded health, batched reads preserve order across N/F/ST types, TagCreateParams composition (gateway/port/path/slc500 attribute/tag-name), non-writable tag → BadNotWritable, successful write encodes + flushes, bit-within-word → BadNotSupported (RmwThrowingFake mirrors LibplctagLegacyTagRuntime's runtime check), write exception → BadCommunicationError, batch preserves order across success+fail+unknown, cancellation propagates, ShutdownAsync disposes runtimes. Total AbLegacy unit tests now 82/82 passing (+14 from PR 1's 68). Full solution builds 0 errors; Modbus + AbCip + other drivers untouched.
2026-04-19 17:58:38 -04:00
AB Legacy PR 1 — Scaffolding + Core (AbLegacyDriver + PCCC address parser). New Driver.AbLegacy project with the libplctag 1.5.2 reference + the same Core.Abstractions-only project shape AbCip uses. AbLegacyHostAddress duplicates the ab://gateway[:port]/cip-path parser from AbCip since PCCC-over-EIP uses the same gateway routing convention (SLC 500 direct-wired with empty path, PLC-5 bridged through a ControlLogix chassis with full CIP path). Parser is 30 lines; copy was cheaper than introducing a shared Ab* project just to avoid duplication. AbLegacyAddress handles PCCC file addressing — file-letter + optional file-number + colon + word-number + optional sub-element (.ACC / .PRE / .EN / .DN / .CU / .CD / .LEN / .POS / .ER) + optional /bit-index. Handles the full shape variety — N7:0 (integer file 7 word 0), F8:5 (float file 8 word 5), B3:0/0 (bit file 3 word 0 bit 0), ST9:0 (string file 9 string 0), L9:3 (long file SLC 5/05+), T4:0.ACC (timer accumulator), C5:2.CU (counter count-up bit), R6:0.LEN (control length), I:0/0 (input file bit — no file number for I/O/S), O:1/2 (output file bit), S:1 (status file word), N7:0/3 (bit within integer file). Validates file letters against the canonical SLC/ML/PLC-5 set (N/F/B/L/ST/T/C/R/I/O/S/A). ToLibplctagName roundtrips so the parsed value can be handed straight to libplctag's name= attribute. AbLegacyDataType — Bit / Int (N-file, 16-bit signed) / Long (L-file, 32-bit, SLC 5/05+ only) / Float (F-file, 32-bit IEEE-754) / AnalogInt (A-file) / String (ST-file, 82-byte fixed + length word) / TimerElement / CounterElement / ControlElement. ToDriverDataType widens Long to Int32 matching the Modbus/AbCip Int64-gap convention. AbLegacyStatusMapper shares the OPC UA status constants with AbCip (same numeric values, different namespace). MapLibplctagStatus mirrors AbCip — 0 success, positive pending, negative error code families. MapPcccStatus handles PCCC STS bytes — 0x00 success, 0x10 illegal command, 0x20 bad address, 0x30 protected, 0x40/0x50 busy, 0xF0 extended status. AbLegacyDriverOptions + AbLegacyDeviceOptions + AbLegacyTagDefinition + AbLegacyProbeOptions mirror AbCip shapes — one instance supports N devices via Devices list, Tags list references devices by HostAddress cross-key, Probe uses S:0 by default as the cheap probe address. AbLegacyPlcFamilyProfile for four families — Slc500 (slc500 attribute, 1,0 default path, supports L + ST files, 240B max PCCC packet), MicroLogix (micrologix attribute, empty path for direct EIP, supports ST but not L), Plc5 (plc5 attribute, 1,0 default path, supports ST but predates L), LogixPccc (logixpccc attribute, full Logix ConnectionSize + L file support via the PCCC compatibility layer on ControlLogix). AbLegacyDriver implements IDriver only — InitializeAsync parses each device's HostAddress and selects its profile (fails fast on malformed strings → Faulted health), per-device state with parsed address + options + profile + empty placeholder for PRs 2-3. ShutdownAsync clears the device dict. 68 new unit tests across 3 files — AbLegacyAddressTests (15 valid shapes + 10 invalid shapes + 7 ToLibplctagName roundtrip), AbLegacyHostAndStatusTests (4 valid host + 5 invalid host + 8 PCCC STS + 7 libplctag status), AbLegacyDriverTests (IDriver lifecycle + multi-device init with per-family profile selection + malformed-address fault + shutdown + family profile defaults + ForFamily theory + data-type mapping). Total project count 29 src + 18 tests; full solution builds 0 errors; Modbus + AbCip + other drivers untouched.
2026-04-19 17:54:25 -04:00