Files
Joseph Doherty
aeb28cc8e7
TwinCAT PR 3 — ITagDiscovery + ISubscribable + IHostConnectivityProbe + IPerCallHostResolver. Completes the TwinCAT driver — 7-interface capability set matching AbCip / AbLegacy (minus IAlarmSource, same deferral). ITagDiscovery emits pre-declared tags under TwinCAT/device-host folder with DeviceName fallback to HostAddress; Writable→Operate / non-writable→ViewOnly. Symbol-browsing via AdsClient.ReadSymbolsAsync / ReadSymbolInfoAsync deferred to a follow-up (same shape as the @tags deferral for AbCip — needs careful traversal of the TwinCAT symbol table + type graph which the ReadSymbolsAsync API does expose but adds enough scope to warrant its own PR). ISubscribable consumes the shared PollGroupEngine — 4th consumer after Modbus + AbCip + AbLegacy. TwinCAT supports native ADS notifications (AddDeviceNotification) which would be strictly superior to polling, but plumbing through OPC UA semantics + the PollGroupEngine abstraction would require a parallel sampling path; poll-first matches the cross-driver pattern + gets the driver shippable. Follow-up task for native-notification upgrade tracked after merge. IHostConnectivityProbe — per-device probe loop using ITwinCATClient.ProbeAsync which wraps AdsClient.ReadStateAsync (cheap handshake that returns the target's AdsState, succeeds when router + target both respond). Success transitions to Running, any exception or probe-false to Stopped. Same lazy-connect + dispose-on-failure pattern as the read/write path — device state reconnects cleanly after a transient. IPerCallHostResolver maps tag full-ref to DeviceHostAddress for Phase 6.1 (DriverInstanceId, ResolvedHostName) bulkhead/breaker keying per plan decision #144; unknown refs fall back to first device, no devices → DriverInstanceId. ShutdownAsync disposes PollGroupEngine + cancels/disposes every probe CTS + disposes every cached client. DeviceState extended with ProbeLock / HostState / HostStateChangedUtc / ProbeCts matching AbCip/AbLegacy shape. 10 new tests in TwinCATCapabilityTests — discovery tag emission with correct SecurityClassification, subscription initial poll raises OnDataChange, shutdown cancels subscriptions, GetHostStatuses entry-per-device, probe Running transition on ProbeResult=true, probe Stopped on ProbeResult=false, probe disabled when Enabled=false, ResolveHost for known/unknown/no-devices paths. Total TwinCAT unit tests now 85/85 passing (+10 from PR 2's 75); full solution builds 0 errors; other drivers untouched. TwinCAT driver complete end-to-end — any TC2/TC3 AMS target reachable through a router is now shippable with read/write/discover/subscribe/probe/host-resolve, feature-parity with AbCip/AbLegacy.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
TwinCAT PR 2 — IReadable + IWritable. ITwinCATClient + ITwinCATClientFactory abstraction — one client per AMS target, reused across reads/writes/probes. Shape differs from AbCip/AbLegacy where libplctag handles are per-tag — TwinCAT's AdsClient is a single connection with symbolic reads/writes issued against it, so the abstraction is coarser. AdsTwinCATClient is the default implementation wrapping Beckhoff.TwinCAT.Ads's AdsClient — ConnectAsync calls AdsClient.Connect(AmsNetId.Parse(netId), port) after setting Timeout in ms; ReadValueAsync dispatches TwinCATDataType to the CLR Type via MapToClrType (bool/sbyte/byte/short/ushort/int/uint/long/ulong/float/double/string/uint for time types) and calls AdsClient.ReadValueAsync(symbol, type, ct) which returns ResultAnyValue; unwraps .Value + .ErrorCode and maps non-NoError codes via TwinCATStatusMapper.MapAdsError. BOOL-within-word reads extract the bit after the underlying word read using ExtractBit over short/ushort/int/uint/long/ulong. WriteValueAsync converts the boxed value via ConvertForWrite (Convert.ToXxx per type) then calls AdsClient.WriteValueAsync returning ResultWrite; checks .ErrorCode for status mapping. BOOL-within-word writes throw NotSupportedException with a pointer to task #181 — same RMW gap as Modbus BitInRegister / AbCip BOOL-in-DINT / AbLegacy bit-within-N-file. ProbeAsync calls AdsClient.ReadStateAsync + checks AdsErrorCode.NoError. TwinCATDriver implements IReadable + IWritable — per-device ITwinCATClient cached in DeviceState.Client, lazy-connected on first read/write via EnsureConnectedAsync, connect-failure path disposes + clears the client so next call re-attempts cleanly. ReadAsync ordered-snapshot pattern matching AbCip/AbLegacy: unknown ref → BadNodeIdUnknown, unknown device → BadNodeIdUnknown, OperationCanceledException rethrow, any other exception → BadCommunicationError + Degraded health. WriteAsync similar — non-Writable tag → BadNotWritable upfront, NotSupportedException → BadNotSupported, FormatException/InvalidCastException (guard pattern) → BadTypeMismatch, OverflowException → BadOutOfRange, generic → BadCommunicationError. Symbol name resolution goes through TwinCATSymbolPath.TryParse(def.SymbolPath) with fallback to the raw def.SymbolPath if the path doesn't parse — the Beckhoff AdsClient handles the final validation at wire time. ShutdownAsync disposes each device's client. 14 new unit tests in TwinCATReadWriteTests using FakeTwinCATClient + FakeTwinCATClientFactory — unknown ref → BadNodeIdUnknown, successful DInt read with Good status + captured value + IsConnected=true after EnsureConnectedAsync, repeat reads reuse the connection (one Connect + multiple reads), ADS error code mapping via FakeTwinCATClient.ReadStatuses, read exception → BadCommunicationError + Degraded health, connect exception disposes the client, batched reads preserve order across DInt/Real/String types, non-Writable rejection, successful write logs symbol+type+value+bit for test inspection, write status-code mapping, write exception → BadCommunicationError, batch preserves order across success/non-writable/unknown, cancellation propagation, ShutdownAsync disposes the client. Total TwinCAT unit tests now 75/75 passing (+14 from PR 1's 61); full solution builds 0 errors; Modbus / AbCip / AbLegacy / other drivers untouched.
TwinCAT PR 3 — ITagDiscovery + ISubscribable + IHostConnectivityProbe + IPerCallHostResolver. Completes the TwinCAT driver — 7-interface capability set matching AbCip / AbLegacy (minus IAlarmSource, same deferral). ITagDiscovery emits pre-declared tags under TwinCAT/device-host folder with DeviceName fallback to HostAddress; Writable→Operate / non-writable→ViewOnly. Symbol-browsing via AdsClient.ReadSymbolsAsync / ReadSymbolInfoAsync deferred to a follow-up (same shape as the @tags deferral for AbCip — needs careful traversal of the TwinCAT symbol table + type graph which the ReadSymbolsAsync API does expose but adds enough scope to warrant its own PR). ISubscribable consumes the shared PollGroupEngine — 4th consumer after Modbus + AbCip + AbLegacy. TwinCAT supports native ADS notifications (AddDeviceNotification) which would be strictly superior to polling, but plumbing through OPC UA semantics + the PollGroupEngine abstraction would require a parallel sampling path; poll-first matches the cross-driver pattern + gets the driver shippable. Follow-up task for native-notification upgrade tracked after merge. IHostConnectivityProbe — per-device probe loop using ITwinCATClient.ProbeAsync which wraps AdsClient.ReadStateAsync (cheap handshake that returns the target's AdsState, succeeds when router + target both respond). Success transitions to Running, any exception or probe-false to Stopped. Same lazy-connect + dispose-on-failure pattern as the read/write path — device state reconnects cleanly after a transient. IPerCallHostResolver maps tag full-ref to DeviceHostAddress for Phase 6.1 (DriverInstanceId, ResolvedHostName) bulkhead/breaker keying per plan decision #144; unknown refs fall back to first device, no devices → DriverInstanceId. ShutdownAsync disposes PollGroupEngine + cancels/disposes every probe CTS + disposes every cached client. DeviceState extended with ProbeLock / HostState / HostStateChangedUtc / ProbeCts matching AbCip/AbLegacy shape. 10 new tests in TwinCATCapabilityTests — discovery tag emission with correct SecurityClassification, subscription initial poll raises OnDataChange, shutdown cancels subscriptions, GetHostStatuses entry-per-device, probe Running transition on ProbeResult=true, probe Stopped on ProbeResult=false, probe disabled when Enabled=false, ResolveHost for known/unknown/no-devices paths. Total TwinCAT unit tests now 85/85 passing (+10 from PR 2's 75); full solution builds 0 errors; other drivers untouched. TwinCAT driver complete end-to-end — any TC2/TC3 AMS target reachable through a router is now shippable with read/write/discover/subscribe/probe/host-resolve, feature-parity with AbCip/AbLegacy.
TwinCAT PR 2 — IReadable + IWritable. ITwinCATClient + ITwinCATClientFactory abstraction — one client per AMS target, reused across reads/writes/probes. Shape differs from AbCip/AbLegacy where libplctag handles are per-tag — TwinCAT's AdsClient is a single connection with symbolic reads/writes issued against it, so the abstraction is coarser. AdsTwinCATClient is the default implementation wrapping Beckhoff.TwinCAT.Ads's AdsClient — ConnectAsync calls AdsClient.Connect(AmsNetId.Parse(netId), port) after setting Timeout in ms; ReadValueAsync dispatches TwinCATDataType to the CLR Type via MapToClrType (bool/sbyte/byte/short/ushort/int/uint/long/ulong/float/double/string/uint for time types) and calls AdsClient.ReadValueAsync(symbol, type, ct) which returns ResultAnyValue; unwraps .Value + .ErrorCode and maps non-NoError codes via TwinCATStatusMapper.MapAdsError. BOOL-within-word reads extract the bit after the underlying word read using ExtractBit over short/ushort/int/uint/long/ulong. WriteValueAsync converts the boxed value via ConvertForWrite (Convert.ToXxx per type) then calls AdsClient.WriteValueAsync returning ResultWrite; checks .ErrorCode for status mapping. BOOL-within-word writes throw NotSupportedException with a pointer to task #181 — same RMW gap as Modbus BitInRegister / AbCip BOOL-in-DINT / AbLegacy bit-within-N-file. ProbeAsync calls AdsClient.ReadStateAsync + checks AdsErrorCode.NoError. TwinCATDriver implements IReadable + IWritable — per-device ITwinCATClient cached in DeviceState.Client, lazy-connected on first read/write via EnsureConnectedAsync, connect-failure path disposes + clears the client so next call re-attempts cleanly. ReadAsync ordered-snapshot pattern matching AbCip/AbLegacy: unknown ref → BadNodeIdUnknown, unknown device → BadNodeIdUnknown, OperationCanceledException rethrow, any other exception → BadCommunicationError + Degraded health. WriteAsync similar — non-Writable tag → BadNotWritable upfront, NotSupportedException → BadNotSupported, FormatException/InvalidCastException (guard pattern) → BadTypeMismatch, OverflowException → BadOutOfRange, generic → BadCommunicationError. Symbol name resolution goes through TwinCATSymbolPath.TryParse(def.SymbolPath) with fallback to the raw def.SymbolPath if the path doesn't parse — the Beckhoff AdsClient handles the final validation at wire time. ShutdownAsync disposes each device's client. 14 new unit tests in TwinCATReadWriteTests using FakeTwinCATClient + FakeTwinCATClientFactory — unknown ref → BadNodeIdUnknown, successful DInt read with Good status + captured value + IsConnected=true after EnsureConnectedAsync, repeat reads reuse the connection (one Connect + multiple reads), ADS error code mapping via FakeTwinCATClient.ReadStatuses, read exception → BadCommunicationError + Degraded health, connect exception disposes the client, batched reads preserve order across DInt/Real/String types, non-Writable rejection, successful write logs symbol+type+value+bit for test inspection, write status-code mapping, write exception → BadCommunicationError, batch preserves order across success/non-writable/unknown, cancellation propagation, ShutdownAsync disposes the client. Total TwinCAT unit tests now 75/75 passing (+14 from PR 1's 61); full solution builds 0 errors; Modbus / AbCip / AbLegacy / other drivers untouched.