8d92e00e38
The driver-layer integration tests confirm the driver sees the PLC, and
the Client.CLI tests confirm the client sees the server. Nothing glued
them end-to-end until this PR.
- scripts/e2e/_common.ps1: shared helpers — CLI invocation (published-
binary OR `dotnet run` fallback), Test-Probe / Test-DriverLoopback /
Test-ServerBridge (all return @{Passed;Reason} hashtables).
- scripts/e2e/test-<modbus|abcip|ablegacy|s7|focas|twincat>.ps1: per-
driver three-stage script (probe → driver-loopback → server-bridge).
AB Legacy / FOCAS / TwinCAT are gated behind *_TRUST_WIRE env vars
since they need real hardware (#222) or a licensed runtime (#221).
- scripts/e2e/test-phase7-virtualtags.ps1: writes a Modbus HR, reads
the server-side VirtualTag (VT = input * 2) back via OPC UA, triggers
+ clears a scripted alarm. Exercises the Phase 7 CachedTagUpstreamSource
+ ScriptedAlarmEngine path.
- scripts/e2e/test-all.ps1: reads e2e-config.json sidecar, runs each
present driver, prints a FINAL MATRIX (PASS/FAIL/SKIP). Missing
sections SKIP rather than fail hard.
- scripts/e2e/e2e-config.sample.json: commented sample — each dev's
NodeIds are local-seed-specific so e2e-config.json is .gitignore-d.
- scripts/e2e/README.md: full walkthrough — prereqs, three-stage design,
env-var gates, expected matrix, why this is separate from `dotnet test`.
Tasks #249-#251 shipped Modbus/AbCip/AbLegacy/S7/TwinCAT CLIs but left
FOCAS out. Since test-focas.ps1 needs it, the 6th CLI ships here:
- src/ZB.MOM.WW.OtOpcUa.Driver.FOCAS.Cli: probe/read/write/subscribe
commands, AssemblyName `otopcua-focas-cli`. WriteCommand.ParseValue
handles the full FocasDataType enum (Bit/Byte/Int16/Int32/Float32/
Float64/String — no UInt variants; the FOCAS protocol exposes signed
PMC + Fanuc-Float only). Default DataType is Int16 to match the PMC
register convention.
Full-solution build clean (0 errors). FOCAS CLI wired into
ZB.MOM.WW.OtOpcUa.slnx. No .Tests project for the FOCAS CLI yet —
symmetric with how ProbeCommand has no unit-testable pure logic in the
other 5 CLIs either; WriteCommand.ParseValue parity will land in a
follow-up to keep this PR scoped.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
81 lines
2.7 KiB
PowerShell
81 lines
2.7 KiB
PowerShell
#Requires -Version 7.0
|
|
<#
|
|
.SYNOPSIS
|
|
End-to-end CLI test for the AB Legacy (PCCC) driver.
|
|
|
|
.DESCRIPTION
|
|
**KNOWN-BROKEN upstream (ab_server PCCC dispatcher gap, verified 2026-04-21).**
|
|
Works against real SLC / MicroLogix / PLC-5 hardware or a RSEmulate 500
|
|
golden-box. Against the Docker ab_server the tests deliberately skip —
|
|
same gate as tests/.../AbLegacy.IntegrationTests (AB_LEGACY_TRUST_WIRE=1).
|
|
|
|
Three assertions: probe / driver-loopback / server-bridge.
|
|
|
|
.PARAMETER Gateway
|
|
ab://host[:port]/cip-path. Default ab://127.0.0.1/1,0.
|
|
|
|
.PARAMETER PlcType
|
|
Slc500 / MicroLogix / Plc5 / LogixPccc (default Slc500).
|
|
|
|
.PARAMETER Address
|
|
PCCC address to exercise. Default N7:5.
|
|
|
|
.PARAMETER OpcUaUrl
|
|
OtOpcUa server endpoint.
|
|
|
|
.PARAMETER BridgeNodeId
|
|
NodeId at which the server publishes the Address.
|
|
#>
|
|
|
|
param(
|
|
[string]$Gateway = "ab://127.0.0.1/1,0",
|
|
[string]$PlcType = "Slc500",
|
|
[string]$Address = "N7:5",
|
|
[string]$OpcUaUrl = "opc.tcp://localhost:4840",
|
|
[Parameter(Mandatory)] [string]$BridgeNodeId
|
|
)
|
|
|
|
$ErrorActionPreference = "Stop"
|
|
. "$PSScriptRoot/_common.ps1"
|
|
|
|
# Skip-gate: the driver CLI's underlying AbLegacyServerFixture-equivalent
|
|
# check — operators point at real hardware by setting AB_LEGACY_TRUST_WIRE=1.
|
|
# Without the opt-in we skip (don't run against the known-broken ab_server).
|
|
if (-not ($env:AB_LEGACY_TRUST_WIRE -eq "1" -or $env:AB_LEGACY_TRUST_WIRE -eq "true")) {
|
|
Write-Skip "AB_LEGACY_TRUST_WIRE not set — skipping (ab_server PCCC is upstream-broken; set =1 against real hardware / RSEmulate)."
|
|
exit 0
|
|
}
|
|
|
|
$abLegacyCli = Get-CliInvocation `
|
|
-ProjectFolder "src/ZB.MOM.WW.OtOpcUa.Driver.AbLegacy.Cli" `
|
|
-ExeName "otopcua-ablegacy-cli"
|
|
$opcUaCli = Get-CliInvocation `
|
|
-ProjectFolder "src/ZB.MOM.WW.OtOpcUa.Client.CLI" `
|
|
-ExeName "otopcua-cli"
|
|
|
|
$commonAbLegacy = @("-g", $Gateway, "-P", $PlcType)
|
|
$results = @()
|
|
|
|
$results += Test-Probe `
|
|
-Cli $abLegacyCli `
|
|
-ProbeArgs (@("probe") + $commonAbLegacy + @("-a", "N7:0"))
|
|
|
|
$writeValue = Get-Random -Minimum 1 -Maximum 9999
|
|
$results += Test-DriverLoopback `
|
|
-Cli $abLegacyCli `
|
|
-WriteArgs (@("write") + $commonAbLegacy + @("-a", $Address, "-t", "Int", "-v", $writeValue)) `
|
|
-ReadArgs (@("read") + $commonAbLegacy + @("-a", $Address, "-t", "Int")) `
|
|
-ExpectedValue "$writeValue"
|
|
|
|
$bridgeValue = Get-Random -Minimum 10000 -Maximum 19999
|
|
$results += Test-ServerBridge `
|
|
-DriverCli $abLegacyCli `
|
|
-DriverWriteArgs (@("write") + $commonAbLegacy + @("-a", $Address, "-t", "Int", "-v", $bridgeValue)) `
|
|
-OpcUaCli $opcUaCli `
|
|
-OpcUaUrl $OpcUaUrl `
|
|
-OpcUaNodeId $BridgeNodeId `
|
|
-ExpectedValue "$bridgeValue"
|
|
|
|
Write-Summary -Title "AB Legacy e2e" -Results $results
|
|
if ($results | Where-Object { -not $_.Passed }) { exit 1 }
|