Persist the canonical AuditOutcome and make structured audit rows visible.
- ConfigAuditLog gains a nullable Outcome column, stored as the AuditOutcome
enum member name (nvarchar(16), mirroring how AdminRole is persisted). The
AuditWriterActor flush now writes Outcome = evt.Outcome.ToString(). Nullable so
legacy rows and the bespoke stored-procedure path (no derived outcome) write
NULL.
- Migration 20260602135350_AddConfigAuditLogOutcome: additive nullable column,
no backfill. Up adds the column, Down drops it. Chains after
20260602112419_CanonicalizeAdminRoles; `dotnet ef migrations
has-pending-model-changes` is clean.
- ClusterAudit visibility fix: the page filtered solely on ClusterId, but the
structured AuditWriterActor path stamps NodeId (ClusterId null), so those rows
were invisible. Extracted ClusterAuditQuery.ForClusterAsync (shared by the page
and tests) which ORs in rows whose NodeId belongs to a node in the cluster —
membership resolved from ClusterNode (NodeId -> ClusterId). SP-path
ClusterId-stamped rows still match.
Tests: ControlPlane 45/45 (adds Outcome persistence + Denied-outcome asserts);
new Configuration ClusterAuditQueryTests 3/3 (both-paths visible, other-cluster
excluded, page-size cap); AdminUI 121/121. Configuration Unit suite is green on a
clean run (a pre-existing timing flake in ResilientConfigReaderTests, untouched
here, occasionally fails under parallel load and passes in isolation).
Standardize the control-plane admin role VALUES on the canonical six
(ZB.MOM.WW.Auth CanonicalRole). OtOpcUa uses four:
ConfigViewer -> Viewer
ConfigEditor -> Designer
FleetAdmin -> Administrator
DriverOperator -> Operator (appsettings-only string role)
This is a rename, not a permission change: enforcement semantics are
preserved (whoever could deploy/administer/operate before still can).
- AdminRole enum members renamed (persisted as string names via
HasConversion<string>); RoleGrants.razor dropdown default updated.
- EF DATA migration CanonicalizeAdminRoles rewrites existing
LdapGroupRoleMapping.Role rows old->new (Up) and back (Down); schema /
model snapshot byte-identical (no pending model changes).
- Enforcement role STRINGS canonicalized:
* Security policies keep their NAMES ("DriverOperator"/"FleetAdmin")
but require canonical roles: RequireRole("Operator","Administrator")
and RequireRole("Administrator").
* Deployments.razor [Authorize(Roles="Administrator,Designer")].
* DevStub now grants "Administrator"; LdapOptions/doc-comment examples
canonicalized.
- Data-plane authorization (NodePermissions/NodeAcl/IPermissionEvaluator/
TriePermissionEvaluator/UserAuthorizationState) UNTOUCHED.
- New CanonicalAdminRolesTests pins canonical claim values end-to-end and
the real registered policies; existing role-string tests updated.
Both bugs surfaced only on split-role deployments (the MAIN cluster's
admin-only nodes), where the AdminUI runs without the driver role.
- Test Connect returned "No probe registered" for every driver: the
IDriverProbe set was registered only under the driver role, but the
admin-operations singleton that consumes it is pinned to admin. Extract
AddOtOpcUaDriverProbes() (idempotent via TryAddEnumerable) and call it
in the hasAdmin path too.
- Live driver-status/alerts/script-log panels showed "SignalR error:
Connection refused": these Blazor Server components opened a HubConnection
to their own hub via the browser's public URL, which server-side code
can't reach behind Traefik (host :9200 -> container :9000). Read the
in-process source directly instead -- DriverStatus via
IDriverStatusSnapshotStore.SnapshotChanged, Alerts/ScriptLog via a new
IInProcessBroadcaster<T>. Fleet status was unaffected (reads DB/ActorSystem).
Adds unit tests for probe registration, the snapshot-store event, and the
broadcaster.
GalaxyDriverPage deserialized DriverConfig with case-sensitive camelCase opts, but the
persisted/seeded config is PascalCase (the runtime reads it case-insensitively). So all four
nested option records read as null -> FromRecord NRE (HTTP 500) on edit, and the form would
have shown defaults instead of the real config (risking a clobber on save). Fix: add
PropertyNameCaseInsensitive=true (matches the runtime) so real values load, plus null-coalesce
the nested records in FromRecord as defense-in-depth. Regression test asserts the seeded
PascalCase config loads its real values.
The driver/factory/seed use 'GalaxyMxGateway' (legacy 'Galaxy' was retired),
but the AdminUI editor router, GalaxyDriverPage, address picker, identity
dropdown, the Galaxy browser/probe, and DraftValidator still keyed on 'Galaxy'.
Result: the seeded GalaxyMxGateway driver couldn't be edited ('no editor
registered'), UI-created Galaxy drivers wrote a type with no factory, and a
SystemPlatform-bound GalaxyMxGateway driver failed publish validation.
Align all stragglers to GalaxyMxGateway (+ failing-test-first DraftValidator
coverage). ShouldStub's 'Galaxy' legacy safety-net left intact.
Capture the original ModbusTagDefinition as _source in ModbusTagRow and
rewrite ToDefinition() to use 'with {}', so StringByteOrder, ArrayCount,
Deadband, UnitId, and CoalesceProhibited survive a load→edit→save cycle.
- DriverTagPicker shell: modal chrome + per-driver picker body
rendered as ChildContent.
- 9 picker bodies (Modbus/AbCip/AbLegacy/S7/TwinCat/FOCAS/
OpcUaClient/Galaxy/Historian.Wonderware). 5 have computed
builder logic + unit tests; 4 are free-text passthroughs
(live browse for OPC UA + Galaxy is a documented follow-up).
- Each typed driver page gets a "Pick address" button that opens
the modal with the matching body. Picked address surfaces in
the modal footer for manual copy — no JS interop in v1.
- AdminProbeService routes TestDriverConnect through
IAdminOperationsClient with a 65s outer guard (actor side already
clamps to [1,60]).
- Added generic AskAsync<T> to IAdminOperationsClient interface and
AdminOperationsClient impl, delegating straight to the Akka proxy.
- DriverTestConnectButton renders the button + inline result chip,
auto-clears after 30s, disables during in-flight.
- Wired into all 9 typed driver pages directly under the
identity section. Sources timeout from the form's
ProbeTimeoutSeconds; sources config JSON from the form's
current Options (operator can test BEFORE saving).
Live panel subscribed to the /hubs/driverstatus SignalR feed —
renders state chip, last-success age, 5-min error count, last
error message. Auto-reconnect; dimmed when no push arrives for 30s.
Hidden for new instances (nothing deployed yet); shown read-only
on every edit-mode page. Reconnect/Restart buttons land in Phase 8.
- S7DriverPage.FormModel now preserves Tags through Form ↔ Options
translation (was hard-coding Tags = [] on every save, silently
destroying any tag list that operators had configured).
- Add FormModel_RoundTrip tests for OpcUaClient and Historian
mirror classes — both were translating Options ↔ form-model
entirely untested.
- Surface S7 Tags in the round-trip test so this regression
can't reach merge again.
All 9 driver types now have typed pages; DriverEditRouter dispatches
to them directly. Unknown DriverType strings (e.g. legacy rows) render
an explicit error notice instead of falling through to a generic
editor — the failure mode is now visible, not silent.
DriverEditRouter now dispatches every known DriverType to its typed
page. The legacy DriverEdit fallback remains in ResolveComponentType
for forward-compatibility with as-yet-unknown driver types but is no
longer reached for any current driver.
Removes both @page directives from DriverEdit.razor. The picker owns
/drivers/new; the router owns /drivers/{id} and dispatches via
DynamicComponent (currently falls back to DriverEdit for every driver
type — Phase 4 populates the type map one driver at a time).
Adds /clusters/{ClusterId}/drivers/new picker page (Task 3.1). Renders
a 9-card Bootstrap grid — one card per driver type — each linking to
/clusters/{ClusterId}/drivers/new/{slug}. No data fetch; type list is
hardcoded. Route collides with DriverEdit.razor's same directive; Task
3.3 removes the duplicate to resolve the runtime ambiguity.
No functional change — the identity, resilience, and save-bar are now
each in their own reusable component so the typed driver pages (Phase 4)
can share them. The middle "Driver config (JSON)" panel stays inlined
for now — it's replaced wholesale by typed forms in Phase 4.
User chose to revert the MxAccess Gateway rebrand on the login card. Keep
the layout fix from c064ec1 (no panel-head top strip; inline h1.login-title)
and just put the original product name back.
Two small UX fixes:
- AuthEndpoints.LogoutAsync now redirects browser callers to /login after
SignOutAsync instead of returning 204 NoContent. 204 was correct for the
REST contract but left browsers stuck on the page they came from (the
cookie was cleared but no navigation happened, so "Sign out" appeared
to do nothing). API callers can still opt into the status-only behavior
by sending `Accept: application/json`.
- Login.razor drops the .panel-head top strip; the sign-in card now reads
as a self-contained form with an inline title "MxAccess Gateway Admin —
sign in". Added a .login-title CSS class to site.css that matches the
panel-head's typographic weight without the bar.
ScriptedAlarmActor (Runtime/ScriptedAlarms) shipped a while back — the
"Engine wiring (F9 ScriptedAlarmActor) is pending" stub message was
misleading. Also drop the matching "(F9)" / "(future)" parentheticals
in the intro panel and frame the empty state as a current-window
condition, not a missing feature.
Port the ScadaLink CentralUI sidebar pattern into the OtOpcUa AdminUI:
- Drop the top app-bar. Brand moves into the side rail's header — same
visual rhythm as ScadaLink's NavMenu.
- New NavSection.razor: collapsible eyebrow toggle (rail-eyebrow-toggle CSS)
with a chevron + label. Mirrors ScadaLink/Components/Layout/NavSection.
- New NavSidebar.razor: interactive island carrying the three section
groups (Navigation / Scripting / Live) + session block. Marked
@rendermode InteractiveServer; MainLayout itself stays static-rendered
because layouts can't take a RenderFragment Body across an interactive
boundary.
- New wwwroot/js/nav-state.js: window.navState.get/.set persists the
expanded-section list to the otopcua_nav cookie (one-year lifetime,
SameSite=Lax). Same shape as ScadaLink's scadabridge_nav.
- New LoginLayout.razor + @layout LoginLayout on Login.razor: the login
page now renders without the side rail — clean centred card.
- MainLayout.razor: slimmed down to the d-flex shell + hamburger toggle +
<NavSidebar/> + @Body.
- Login.razor: also drops the trailing "LDAP bind against the configured
directory..." footer that the user asked to remove.
- site.css: adds .side-rail .brand styles (mirrored from ScadaLink) and
the .rail-eyebrow-toggle / .rail-eyebrow-chevron / .rail-section-body
styles for the new collapsible UI.
Auto-expand on page load: NavSidebar seeds the expanded set from the
current URL's first path segment (in OnInitialized so it works even on
the very first server render) and from the cookie (in OnAfterRenderAsync
once JS interop is available). LocationChanged hooks keep the expanded
state in sync as the user navigates between sections.
Joseph Doherty