Task #253 — E2E CLI test scripts + FOCAS test-client CLI

The driver-layer integration tests confirm the driver sees the PLC, and
the Client.CLI tests confirm the client sees the server. Nothing glued
them end-to-end until this PR.

- scripts/e2e/_common.ps1: shared helpers — CLI invocation (published-
  binary OR `dotnet run` fallback), Test-Probe / Test-DriverLoopback /
  Test-ServerBridge (all return @{Passed;Reason} hashtables).
- scripts/e2e/test-<modbus|abcip|ablegacy|s7|focas|twincat>.ps1: per-
  driver three-stage script (probe → driver-loopback → server-bridge).
  AB Legacy / FOCAS / TwinCAT are gated behind *_TRUST_WIRE env vars
  since they need real hardware (#222) or a licensed runtime (#221).
- scripts/e2e/test-phase7-virtualtags.ps1: writes a Modbus HR, reads
  the server-side VirtualTag (VT = input * 2) back via OPC UA, triggers
  + clears a scripted alarm. Exercises the Phase 7 CachedTagUpstreamSource
  + ScriptedAlarmEngine path.
- scripts/e2e/test-all.ps1: reads e2e-config.json sidecar, runs each
  present driver, prints a FINAL MATRIX (PASS/FAIL/SKIP). Missing
  sections SKIP rather than fail hard.
- scripts/e2e/e2e-config.sample.json: commented sample — each dev's
  NodeIds are local-seed-specific so e2e-config.json is .gitignore-d.
- scripts/e2e/README.md: full walkthrough — prereqs, three-stage design,
  env-var gates, expected matrix, why this is separate from `dotnet test`.

Tasks #249-#251 shipped Modbus/AbCip/AbLegacy/S7/TwinCAT CLIs but left
FOCAS out. Since test-focas.ps1 needs it, the 6th CLI ships here:

- src/ZB.MOM.WW.OtOpcUa.Driver.FOCAS.Cli: probe/read/write/subscribe
  commands, AssemblyName `otopcua-focas-cli`. WriteCommand.ParseValue
  handles the full FocasDataType enum (Bit/Byte/Int16/Int32/Float32/
  Float64/String — no UInt variants; the FOCAS protocol exposes signed
  PMC + Fanuc-Float only). Default DataType is Int16 to match the PMC
  register convention.

Full-solution build clean (0 errors). FOCAS CLI wired into
ZB.MOM.WW.OtOpcUa.slnx. No .Tests project for the FOCAS CLI yet —
symmetric with how ProbeCommand has no unit-testable pure logic in the
other 5 CLIs either; WriteCommand.ParseValue parity will land in a
follow-up to keep this PR scoped.

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>

.gitignore

@@ -33,3 +33,6 @@ packages/
 
 # LiteDB local config cache (Phase 6.1 Stream D — runtime artifact, not source)
 src/ZB.MOM.WW.OtOpcUa.Server/config_cache.db
+
+# E2E sidecar config — NodeIds are specific to each dev's local seed (see scripts/e2e/README.md)
+scripts/e2e/e2e-config.json

ZB.MOM.WW.OtOpcUa.slnx

@@ -30,6 +30,7 @@
         <Project Path="src/ZB.MOM.WW.OtOpcUa.Driver.AbLegacy.Cli/ZB.MOM.WW.OtOpcUa.Driver.AbLegacy.Cli.csproj"/>
         <Project Path="src/ZB.MOM.WW.OtOpcUa.Driver.S7.Cli/ZB.MOM.WW.OtOpcUa.Driver.S7.Cli.csproj"/>
         <Project Path="src/ZB.MOM.WW.OtOpcUa.Driver.TwinCAT.Cli/ZB.MOM.WW.OtOpcUa.Driver.TwinCAT.Cli.csproj"/>
+        <Project Path="src/ZB.MOM.WW.OtOpcUa.Driver.FOCAS.Cli/ZB.MOM.WW.OtOpcUa.Driver.FOCAS.Cli.csproj"/>
         <Project Path="src/ZB.MOM.WW.OtOpcUa.Analyzers/ZB.MOM.WW.OtOpcUa.Analyzers.csproj"/>
     </Folder>
     <Folder Name="/tests/">

scripts/e2e/README.md

@@ -0,0 +1,135 @@
+# E2E CLI test scripts
+
+End-to-end black-box tests that drive each protocol through its driver CLI
+and verify the resulting OPC UA address-space state through
+`otopcua-cli`. They answer one question per driver:
+
+> **If I poke the real PLC through the driver, does the running OtOpcUa
+> server see the change?**
+
+This is the acceptance gate v1 was missing — the driver-level integration
+tests (`tests/.../IntegrationTests/`) confirm the driver sees the PLC, and
+the OPC UA `Client.CLI.Tests` confirm the client sees the server — but
+nothing glued them end-to-end. These scripts close that loop.
+
+## Three-stage test per driver
+
+Every per-driver script runs the same three tests:
+
+1. **`probe`** — driver CLI opens a session + reads a sentinel. Confirms
+   the simulator / PLC is reachable and speaking the protocol.
+2. **Driver loopback** — write a random value via the driver CLI, read it
+   back via the same CLI. Confirms the driver round-trips without
+   involving the OPC UA server. A failure here is a driver bug, not a
+   server-bridge bug.
+3. **Server bridge** — write a different random value via the driver
+   CLI, wait `--ServerPollDelaySec` (default 3s), read the OPC UA NodeId
+   the server publishes that tag at via `otopcua-cli read`. Confirms the
+   full path: driver CLI → PLC → OtOpcUa server → OPC UA client.
+
+The OtOpcUa server must already be running with a config that
+(a) binds a driver instance to the same PLC the script points at, and
+(b) publishes the address the script writes under a NodeId the script
+knows. Those NodeIds live in `e2e-config.json` (see below).
+
+## Prereqs
+
+1. **OtOpcUa server** running on `opc.tcp://localhost:4840` (or pass
+   `-OpcUaUrl` to override). The server's Config DB must define a
+   driver instance per protocol you want to test, bound to the matching
+   simulator endpoint.
+2. **Per-driver simulators** running. See `docs/v2/test-data-sources.md`
+   for the simulator matrix — pymodbus / ab_server / python-snap7 /
+   opc-plc cover Modbus / AB / S7 / OPC UA Client. FOCAS and TwinCAT
+   have no public simulator; they are gated with env-var skip flags
+   below.
+3. **PowerShell 7+**. The runner uses null-coalescing + `Set-StrictMode`;
+   the Windows-PowerShell-5.1 shell will not parse `test-all.ps1`.
+4. **.NET 10 SDK**. Each script either runs `dotnet run --project
+   src/ZB.MOM.WW.OtOpcUa.Driver.<Name>.Cli` directly, or if
+   `$env:OTOPCUA_CLI_BIN` points at a publish folder, runs the pre-built
+   `otopcua-*.exe` from there (faster for repeat loops).
+
+## Running
+
+### One protocol at a time
+
+```powershell
+./scripts/e2e/test-modbus.ps1 `
+  -ModbusHost    127.0.0.1:5502 `
+  -BridgeNodeId "ns=2;s=Modbus/HR100"
+```
+
+Every per-protocol script takes the driver endpoint, the address to
+write, and the OPC UA NodeId the server exposes it at.
+
+### Full matrix
+
+```powershell
+./scripts/e2e/test-all.ps1 `
+  -ConfigFile ./scripts/e2e/e2e-config.json
+```
+
+The runner reads the sidecar JSON, invokes each driver's script with the
+parameters from that section, and prints a `FINAL MATRIX` showing
+PASS / FAIL / SKIP per driver. Any driver absent from the sidecar is
+SKIP-ed rather than failing hard — useful on dev boxes that only have
+one simulator up.
+
+### Sidecar format
+
+Copy `e2e-config.sample.json` → `e2e-config.json` and fill in the
+NodeIds from **your** server's Config DB. The file is `.gitignore`-d
+(each dev's NodeIds are specific to their local seed). Omit a driver
+section to skip it.
+
+## Expected pass/fail matrix (default config)
+
+| Driver | Gate | Default state on a clean dev box |
+|---|---|---|
+| Modbus | — | **PASS** (pymodbus fixture) |
+| AB CIP | — | **PASS** (ab_server fixture) |
+| AB Legacy | `AB_LEGACY_TRUST_WIRE=1` | **SKIP** (ab_server PCCC path upstream-broken — task #222) |
+| S7 | — | **PASS** (python-snap7 fixture) |
+| FOCAS | `FOCAS_TRUST_WIRE=1` | **SKIP** (no public simulator — task #222 lab rig) |
+| TwinCAT | `TWINCAT_TRUST_WIRE=1` | **SKIP** (needs XAR or standalone Router — task #221) |
+| Phase 7 | — | **PASS** if the Modbus instance seeds a `VT_DoubledHR100` virtual tag + `AlarmHigh` scripted alarm |
+
+Set the `*_TRUST_WIRE` env vars to `1` when you've pointed the script at
+real hardware or a properly-configured simulator.
+
+## Output
+
+Each step prints one of:
+
+- `[PASS] ...` — step succeeded
+- `[FAIL] ...` — step failed, stdout of the failing CLI is echoed below
+  for diagnosis
+- `[SKIP] ...` — step short-circuited (env-var gate)
+- `[INFO] ...` — progress note (e.g., "waiting 3s for server-side poll")
+
+The runner ends with a coloured summary per driver:
+
+```
+==================== FINAL MATRIX ====================
+  modbus     PASS
+  abcip      PASS
+  ablegacy   SKIP (no config entry)
+  s7         PASS
+  focas      SKIP (no config entry)
+  twincat    SKIP (no config entry)
+  phase7     PASS
+All present suites passed.
+```
+
+Non-zero exit if any present suite failed. SKIPs do not fail the run.
+
+## Why this is separate from `dotnet test`
+
+`dotnet test` covers driver-layer + server-layer correctness in
+isolation — mocks + in-process test hosts. These e2e scripts cover the
+integration seam that unit tests *can't* cover by design: a live OPC UA
+server process, a live simulator, and the wire between them. Run them
+before a v2 release-readiness sign-off, after a driver-layer change
+that could plausibly affect the NodeManager contract, and before any
+"it works on my box" handoff to QA.

scripts/e2e/_common.ps1

@@ -0,0 +1,219 @@
+# Shared PowerShell helpers for the OtOpcUa end-to-end CLI test scripts.
+#
+# Every per-protocol script dot-sources this file and calls the Test-* functions
+# below. Keeps the per-script code down to ~50 lines of parameterisation +
+# bridging-tag identifiers.
+#
+# Conventions:
+#   - All test helpers return a hashtable: @{ Passed=<bool>; Reason=<string> }
+#   - Helpers never throw unless the test setup is itself broken (a crashed
+#     CLI is a test failure, not an exception).
+#   - Output is plain text with [PASS] / [FAIL] / [SKIP] / [INFO] prefixes so
+#     grep/log-scraping works.
+
+Set-StrictMode -Version 3.0
+
+# ---------------------------------------------------------------------------
+# Colouring + prefixes.
+# ---------------------------------------------------------------------------
+
+function Write-Header {
+    param([string]$Title)
+    Write-Host ""
+    Write-Host "=== $Title ===" -ForegroundColor Cyan
+}
+
+function Write-Pass {
+    param([string]$Message)
+    Write-Host "[PASS] $Message" -ForegroundColor Green
+}
+
+function Write-Fail {
+    param([string]$Message)
+    Write-Host "[FAIL] $Message" -ForegroundColor Red
+}
+
+function Write-Skip {
+    param([string]$Message)
+    Write-Host "[SKIP] $Message" -ForegroundColor Yellow
+}
+
+function Write-Info {
+    param([string]$Message)
+    Write-Host "[INFO] $Message" -ForegroundColor Gray
+}
+
+# ---------------------------------------------------------------------------
+# CLI invocation helpers.
+# ---------------------------------------------------------------------------
+
+# Resolve a CLI path from either a published binary OR a `dotnet run` fallback.
+# Preferred order:
+#   1. $env:OTOPCUA_CLI_BIN points at a publish/ folder → use <exe> there
+#   2. Fall back to `dotnet run --project src/<ProjectFolder> --`
+#
+# $ProjectFolder = relative path from repo root
+# $ExeName       = expected AssemblyName (no .exe)
+function Get-CliInvocation {
+    param(
+        [Parameter(Mandatory)] [string]$ProjectFolder,
+        [Parameter(Mandatory)] [string]$ExeName
+    )
+
+    if ($env:OTOPCUA_CLI_BIN) {
+        $binPath = Join-Path $env:OTOPCUA_CLI_BIN "$ExeName.exe"
+        if (Test-Path $binPath) {
+            return @{ File = $binPath; PrefixArgs = @() }
+        }
+    }
+
+    # Dotnet-run fallback. --no-build would be faster but not every CI step
+    # has rebuilt; default to a full run so the script is forgiving.
+    return @{
+        File       = "dotnet"
+        PrefixArgs = @("run", "--project", $ProjectFolder, "--")
+    }
+}
+
+# Run a CLI and capture stdout+stderr+exitcode. Never throws.
+function Invoke-Cli {
+    param(
+        [Parameter(Mandatory)] $Cli,            # output of Get-CliInvocation
+        [Parameter(Mandatory)] [string[]]$Args, # CLI arguments (after `-- `)
+        [int]$TimeoutSec = 30
+    )
+
+    $allArgs = @($Cli.PrefixArgs) + $Args
+    $output = $null
+    $exitCode = -1
+
+    try {
+        $output = & $Cli.File @allArgs 2>&1 | Out-String
+        $exitCode = $LASTEXITCODE
+    }
+    catch {
+        return @{
+            Output   = $_.Exception.Message
+            ExitCode = -1
+        }
+    }
+
+    return @{
+        Output   = $output
+        ExitCode = $exitCode
+    }
+}
+
+# ---------------------------------------------------------------------------
+# Test helpers — reusable building blocks every per-protocol script calls.
+# ---------------------------------------------------------------------------
+
+# Test 1 — the driver CLI's probe command exits 0. Confirms the PLC / simulator
+# is reachable and speaks the protocol. Prerequisite for everything else.
+function Test-Probe {
+    param(
+        [Parameter(Mandatory)] $Cli,
+        [Parameter(Mandatory)] [string[]]$ProbeArgs
+    )
+    Write-Header "Probe"
+    $r = Invoke-Cli -Cli $Cli -Args $ProbeArgs
+    if ($r.ExitCode -eq 0) {
+        Write-Pass "driver CLI probe succeeded"
+        return @{ Passed = $true }
+    }
+    Write-Fail "driver CLI probe exit=$($r.ExitCode)"
+    Write-Host $r.Output
+    return @{ Passed = $false; Reason = "probe exit $($r.ExitCode)" }
+}
+
+# Test 2 — driver-loopback. Write a value via the driver CLI, read it back via
+# the same CLI, assert round-trip equality. Confirms the driver itself is
+# functional without pulling the OtOpcUa server into the loop.
+function Test-DriverLoopback {
+    param(
+        [Parameter(Mandatory)] $Cli,
+        [Parameter(Mandatory)] [string[]]$WriteArgs,
+        [Parameter(Mandatory)] [string[]]$ReadArgs,
+        [Parameter(Mandatory)] [string]$ExpectedValue
+    )
+    Write-Header "Driver loopback"
+
+    $w = Invoke-Cli -Cli $Cli -Args $WriteArgs
+    if ($w.ExitCode -ne 0) {
+        Write-Fail "write failed (exit=$($w.ExitCode))"
+        Write-Host $w.Output
+        return @{ Passed = $false; Reason = "write failed" }
+    }
+    Write-Info "write ok"
+
+    $r = Invoke-Cli -Cli $Cli -Args $ReadArgs
+    if ($r.ExitCode -ne 0) {
+        Write-Fail "read failed (exit=$($r.ExitCode))"
+        Write-Host $r.Output
+        return @{ Passed = $false; Reason = "read failed" }
+    }
+
+    if ($r.Output -match "Value:\s+$([Regex]::Escape($ExpectedValue))\b") {
+        Write-Pass "round-trip equals $ExpectedValue"
+        return @{ Passed = $true }
+    }
+    Write-Fail "round-trip value mismatch — expected $ExpectedValue"
+    Write-Host $r.Output
+    return @{ Passed = $false; Reason = "value mismatch" }
+}
+
+# Test 3 — server bridge. Write via the driver CLI, read the corresponding
+# OPC UA NodeId via the OPC UA client CLI. Confirms the full path:
+#   driver CLI → PLC → OtOpcUa server (polling/subscription) → OPC UA client.
+function Test-ServerBridge {
+    param(
+        [Parameter(Mandatory)] $DriverCli,
+        [Parameter(Mandatory)] [string[]]$DriverWriteArgs,
+        [Parameter(Mandatory)] $OpcUaCli,
+        [Parameter(Mandatory)] [string]$OpcUaUrl,
+        [Parameter(Mandatory)] [string]$OpcUaNodeId,
+        [Parameter(Mandatory)] [string]$ExpectedValue,
+        [int]$ServerPollDelaySec = 3
+    )
+    Write-Header "Server bridge"
+
+    $w = Invoke-Cli -Cli $DriverCli -Args $DriverWriteArgs
+    if ($w.ExitCode -ne 0) {
+        Write-Fail "driver-side write failed (exit=$($w.ExitCode))"
+        Write-Host $w.Output
+        return @{ Passed = $false; Reason = "driver write failed" }
+    }
+    Write-Info "driver write ok, waiting ${ServerPollDelaySec}s for server-side poll"
+    Start-Sleep -Seconds $ServerPollDelaySec
+
+    $r = Invoke-Cli -Cli $OpcUaCli -Args @("read", "-u", $OpcUaUrl, "-n", $OpcUaNodeId)
+    if ($r.ExitCode -ne 0) {
+        Write-Fail "OPC UA client read failed (exit=$($r.ExitCode))"
+        Write-Host $r.Output
+        return @{ Passed = $false; Reason = "opc-ua read failed" }
+    }
+
+    if ($r.Output -match "Value:\s+$([Regex]::Escape($ExpectedValue))\b") {
+        Write-Pass "server-side read equals $ExpectedValue"
+        return @{ Passed = $true }
+    }
+    Write-Fail "server-side value mismatch — expected $ExpectedValue"
+    Write-Host $r.Output
+    return @{ Passed = $false; Reason = "bridge value mismatch" }
+}
+
+# ---------------------------------------------------------------------------
+# Summary helper — caller passes an array of test results.
+# ---------------------------------------------------------------------------
+
+function Write-Summary {
+    param(
+        [Parameter(Mandatory)] [string]$Title,
+        [Parameter(Mandatory)] [array]$Results
+    )
+    $passed = ($Results | Where-Object { $_.Passed }).Count
+    $failed = ($Results | Where-Object { -not $_.Passed }).Count
+    Write-Host ""
+    Write-Host "=== $Title summary: $passed/$($Results.Count) passed ===" `
+        -ForegroundColor $(if ($failed -eq 0) { "Green" } else { "Red" })
+}

scripts/e2e/e2e-config.sample.json

@@ -0,0 +1,56 @@
+{
+    "$comment": "Copy this file to e2e-config.json and replace the NodeIds with the ones your Config DB publishes. Fields named `opcUaUrl` override the -OpcUaUrl parameter on test-all.ps1 per-driver. Omit a top-level key to skip that driver.",
+
+    "modbus": {
+        "endpoint": "127.0.0.1:5502",
+        "bridgeNodeId": "ns=2;s=Modbus/HR100",
+        "opcUaUrl": "opc.tcp://localhost:4840"
+    },
+
+    "abcip": {
+        "gateway": "ab://127.0.0.1/1,0",
+        "family": "ControlLogix",
+        "tagPath": "TestDINT",
+        "bridgeNodeId": "ns=2;s=AbCip/TestDINT"
+    },
+
+    "ablegacy": {
+        "$comment": "Gated behind AB_LEGACY_TRUST_WIRE=1 — ab_server PCCC path upstream-broken, needs real SLC / MicroLogix / PLC-5 or RSEmulate 500.",
+        "gateway": "ab://192.168.1.10/1,0",
+        "plcType": "Slc500",
+        "address": "N7:5",
+        "bridgeNodeId": "ns=2;s=AbLegacy/N7_5"
+    },
+
+    "s7": {
+        "endpoint": "127.0.0.1:102",
+        "cpu": "S71500",
+        "slot": 0,
+        "address": "DB1.DBW0",
+        "bridgeNodeId": "ns=2;s=S7/DB1_DBW0"
+    },
+
+    "focas": {
+        "$comment": "Gated behind FOCAS_TRUST_WIRE=1 — no public simulator. Point at a real CNC + ensure Fwlib32.dll is on PATH.",
+        "host": "192.168.1.20",
+        "port": 8193,
+        "address": "R100",
+        "bridgeNodeId": "ns=2;s=Focas/R100"
+    },
+
+    "twincat": {
+        "$comment": "Gated behind TWINCAT_TRUST_WIRE=1 — needs XAR or standalone TwinCAT Router NuGet reachable at -AmsNetId.",
+        "amsNetId": "127.0.0.1.1.1",
+        "amsPort": 851,
+        "symbolPath": "MAIN.iCounter",
+        "bridgeNodeId": "ns=2;s=TwinCAT/MAIN_iCounter"
+    },
+
+    "phase7": {
+        "$comment": "Virtual tags + scripted alarms. The VirtualNodeId must resolve to a server-side virtual tag whose script reads the modbus InputNodeId and writes VT = input * 2. The AlarmNodeId is the ConditionId of a scripted alarm that fires when VT > 100.",
+        "modbusEndpoint": "127.0.0.1:5502",
+        "inputNodeId": "ns=2;s=Modbus/HR100",
+        "virtualNodeId": "ns=2;s=Virtual/VT_DoubledHR100",
+        "alarmNodeId": "ns=2;s=Alarm/HR100_High"
+    }
+}

scripts/e2e/test-abcip.ps1

@@ -0,0 +1,85 @@
+#Requires -Version 7.0
+<#
+.SYNOPSIS
+  End-to-end CLI test for the AB CIP driver (ControlLogix / CompactLogix /
+  Micro800 / GuardLogix) bridged through the OtOpcUa server.
+
+.DESCRIPTION
+  Mirrors test-modbus.ps1 but against libplctag's ab_server (or a real Logix
+  controller). Three assertions: probe / driver-loopback / server-bridge.
+
+  Prereqs:
+    - ab_server container up (tests/.../AbCip.IntegrationTests/Docker/docker-compose.yml,
+      --profile controllogix) OR a real PLC on the network.
+    - OtOpcUa server running with an AB CIP DriverInstance pointing at the
+      same gateway + a Tag published at the -BridgeNodeId you pass.
+
+.PARAMETER Gateway
+  ab://host[:port]/cip-path. Default ab://127.0.0.1/1,0 (ab_server ControlLogix).
+
+.PARAMETER Family
+  ControlLogix / CompactLogix / Micro800 / GuardLogix (default ControlLogix).
+
+.PARAMETER TagPath
+  Logix symbolic path to exercise. Default 'TestDINT' — matches the ab_server
+  --tag=TestDINT:DINT[1] seed.
+
+.PARAMETER OpcUaUrl
+  OtOpcUa server endpoint.
+
+.PARAMETER BridgeNodeId
+  NodeId at which the server publishes the TagPath.
+#>
+
+param(
+    [string]$Gateway = "ab://127.0.0.1/1,0",
+    [string]$Family = "ControlLogix",
+    [string]$TagPath = "TestDINT",
+    [string]$OpcUaUrl = "opc.tcp://localhost:4840",
+    [Parameter(Mandatory)] [string]$BridgeNodeId
+)
+
+$ErrorActionPreference = "Stop"
+. "$PSScriptRoot/_common.ps1"
+
+$abcipCli = Get-CliInvocation `
+    -ProjectFolder "src/ZB.MOM.WW.OtOpcUa.Driver.AbCip.Cli" `
+    -ExeName "otopcua-abcip-cli"
+$opcUaCli = Get-CliInvocation `
+    -ProjectFolder "src/ZB.MOM.WW.OtOpcUa.Client.CLI" `
+    -ExeName "otopcua-cli"
+
+$commonAbCip = @("-g", $Gateway, "-f", $Family)
+$results = @()
+
+# Probe via @raw_cpu_type for ControlLogix; against ab_server this surfaces the
+# string 'Controllogix'. Other families use the main TestDINT.
+$probeTag = if ($Family -eq "ControlLogix" -or $Family -eq "CompactLogix" -or $Family -eq "GuardLogix") {
+    "@raw_cpu_type"
+} else {
+    $TagPath
+}
+$probeType = if ($probeTag -eq "@raw_cpu_type") { "String" } else { "DInt" }
+
+$results += Test-Probe `
+    -Cli $abcipCli `
+    -ProbeArgs (@("probe") + $commonAbCip + @("-t", $probeTag, "--type", $probeType))
+
+$writeValue = Get-Random -Minimum 1 -Maximum 9999
+$results += Test-DriverLoopback `
+    -Cli $abcipCli `
+    -WriteArgs (@("write") + $commonAbCip + @("-t", $TagPath, "--type", "DInt", "-v", $writeValue)) `
+    -ReadArgs  (@("read")  + $commonAbCip + @("-t", $TagPath, "--type", "DInt")) `
+    -ExpectedValue "$writeValue"
+
+$bridgeValue = Get-Random -Minimum 10000 -Maximum 19999
+$results += Test-ServerBridge `
+    -DriverCli $abcipCli `
+    -DriverWriteArgs (@("write") + $commonAbCip + @("-t", $TagPath, "--type", "DInt", "-v", $bridgeValue)) `
+    -OpcUaCli $opcUaCli `
+    -OpcUaUrl $OpcUaUrl `
+    -OpcUaNodeId $BridgeNodeId `
+    -ExpectedValue "$bridgeValue"
+
+Write-Summary -Title "AB CIP e2e" -Results $results
+if ($results | Where-Object { -not $_.Passed }) { exit 1 }

scripts/e2e/test-ablegacy.ps1

@@ -0,0 +1,80 @@
+#Requires -Version 7.0
+<#
+.SYNOPSIS
+  End-to-end CLI test for the AB Legacy (PCCC) driver.
+
+.DESCRIPTION
+  **KNOWN-BROKEN upstream (ab_server PCCC dispatcher gap, verified 2026-04-21).**
+  Works against real SLC / MicroLogix / PLC-5 hardware or a RSEmulate 500
+  golden-box. Against the Docker ab_server the tests deliberately skip —
+  same gate as tests/.../AbLegacy.IntegrationTests (AB_LEGACY_TRUST_WIRE=1).
+
+  Three assertions: probe / driver-loopback / server-bridge.
+
+.PARAMETER Gateway
+  ab://host[:port]/cip-path. Default ab://127.0.0.1/1,0.
+
+.PARAMETER PlcType
+  Slc500 / MicroLogix / Plc5 / LogixPccc (default Slc500).
+
+.PARAMETER Address
+  PCCC address to exercise. Default N7:5.
+
+.PARAMETER OpcUaUrl
+  OtOpcUa server endpoint.
+
+.PARAMETER BridgeNodeId
+  NodeId at which the server publishes the Address.
+#>
+
+param(
+    [string]$Gateway = "ab://127.0.0.1/1,0",
+    [string]$PlcType = "Slc500",
+    [string]$Address = "N7:5",
+    [string]$OpcUaUrl = "opc.tcp://localhost:4840",
+    [Parameter(Mandatory)] [string]$BridgeNodeId
+)
+
+$ErrorActionPreference = "Stop"
+. "$PSScriptRoot/_common.ps1"
+
+# Skip-gate: the driver CLI's underlying AbLegacyServerFixture-equivalent
+# check — operators point at real hardware by setting AB_LEGACY_TRUST_WIRE=1.
+# Without the opt-in we skip (don't run against the known-broken ab_server).
+if (-not ($env:AB_LEGACY_TRUST_WIRE -eq "1" -or $env:AB_LEGACY_TRUST_WIRE -eq "true")) {
+    Write-Skip "AB_LEGACY_TRUST_WIRE not set — skipping (ab_server PCCC is upstream-broken; set =1 against real hardware / RSEmulate)."
+    exit 0
+}
+
+$abLegacyCli = Get-CliInvocation `
+    -ProjectFolder "src/ZB.MOM.WW.OtOpcUa.Driver.AbLegacy.Cli" `
+    -ExeName "otopcua-ablegacy-cli"
+$opcUaCli = Get-CliInvocation `
+    -ProjectFolder "src/ZB.MOM.WW.OtOpcUa.Client.CLI" `
+    -ExeName "otopcua-cli"
+
+$commonAbLegacy = @("-g", $Gateway, "-P", $PlcType)
+$results = @()
+
+$results += Test-Probe `
+    -Cli $abLegacyCli `
+    -ProbeArgs (@("probe") + $commonAbLegacy + @("-a", "N7:0"))
+
+$writeValue = Get-Random -Minimum 1 -Maximum 9999
+$results += Test-DriverLoopback `
+    -Cli $abLegacyCli `
+    -WriteArgs (@("write") + $commonAbLegacy + @("-a", $Address, "-t", "Int", "-v", $writeValue)) `
+    -ReadArgs  (@("read")  + $commonAbLegacy + @("-a", $Address, "-t", "Int")) `
+    -ExpectedValue "$writeValue"
+
+$bridgeValue = Get-Random -Minimum 10000 -Maximum 19999
+$results += Test-ServerBridge `
+    -DriverCli $abLegacyCli `
+    -DriverWriteArgs (@("write") + $commonAbLegacy + @("-a", $Address, "-t", "Int", "-v", $bridgeValue)) `
+    -OpcUaCli $opcUaCli `
+    -OpcUaUrl $OpcUaUrl `
+    -OpcUaNodeId $BridgeNodeId `
+    -ExpectedValue "$bridgeValue"
+
+Write-Summary -Title "AB Legacy e2e" -Results $results
+if ($results | Where-Object { -not $_.Passed }) { exit 1 }

scripts/e2e/test-all.ps1

@@ -0,0 +1,192 @@
+#Requires -Version 7.0
+<#
+.SYNOPSIS
+  Runs every scripts/e2e/test-*.ps1 and tallies PASS / FAIL / SKIP.
+
+.DESCRIPTION
+  The per-protocol scripts require protocol-specific NodeIds that depend on
+  your server's config DB seed. This runner expects a JSON sidecar at
+  scripts/e2e/e2e-config.json (not checked in — see README) with one entry
+  per driver giving the NodeIds + endpoints to pass through. Any driver
+  missing from the sidecar is skipped with a clear message rather than
+  failing hard.
+
+.PARAMETER ConfigFile
+  Path to the sidecar JSON. Default: scripts/e2e/e2e-config.json.
+
+.PARAMETER OpcUaUrl
+  Default OPC UA endpoint passed to each per-driver script. Default
+  opc.tcp://localhost:4840. Individual entries in the config file can override.
+#>
+
+param(
+    [string]$ConfigFile = "$PSScriptRoot/e2e-config.json",
+    [string]$OpcUaUrl = "opc.tcp://localhost:4840"
+)
+
+$ErrorActionPreference = "Stop"
+. "$PSScriptRoot/_common.ps1"
+
+if (-not (Test-Path $ConfigFile)) {
+    Write-Fail "no config at $ConfigFile — copy e2e-config.sample.json + fill in your NodeIds first (see README)"
+    exit 2
+}
+
+$config = Get-Content $ConfigFile -Raw | ConvertFrom-Json
+$summary = [ordered]@{}
+
+function Run-Suite {
+    param(
+        [string]$Name,
+        [scriptblock]$Action
+    )
+    try {
+        & $Action
+        $summary[$Name] = if ($LASTEXITCODE -eq 0) { "PASS" } else { "FAIL" }
+    }
+    catch {
+        Write-Fail "$Name runner crashed: $_"
+        $summary[$Name] = "FAIL"
+    }
+}
+
+# ---------------------------------------------------------------------------
+# Modbus
+# ---------------------------------------------------------------------------
+
+if ($config.modbus) {
+    Write-Header "== MODBUS =="
+    Run-Suite "modbus" {
+        & "$PSScriptRoot/test-modbus.ps1" `
+            -ModbusHost   $config.modbus.endpoint `
+            -OpcUaUrl     ($config.modbus.opcUaUrl ?? $OpcUaUrl) `
+            -BridgeNodeId $config.modbus.bridgeNodeId
+    }
+}
+else { $summary["modbus"] = "SKIP (no config entry)" }
+
+# ---------------------------------------------------------------------------
+# AB CIP
+# ---------------------------------------------------------------------------
+
+if ($config.abcip) {
+    Write-Header "== AB CIP =="
+    Run-Suite "abcip" {
+        & "$PSScriptRoot/test-abcip.ps1" `
+            -Gateway      $config.abcip.gateway `
+            -Family       ($config.abcip.family ?? "ControlLogix") `
+            -TagPath      ($config.abcip.tagPath ?? "TestDINT") `
+            -OpcUaUrl     ($config.abcip.opcUaUrl ?? $OpcUaUrl) `
+            -BridgeNodeId $config.abcip.bridgeNodeId
+    }
+}
+else { $summary["abcip"] = "SKIP (no config entry)" }
+
+# ---------------------------------------------------------------------------
+# AB Legacy
+# ---------------------------------------------------------------------------
+
+if ($config.ablegacy) {
+    Write-Header "== AB LEGACY =="
+    Run-Suite "ablegacy" {
+        & "$PSScriptRoot/test-ablegacy.ps1" `
+            -Gateway      $config.ablegacy.gateway `
+            -PlcType      ($config.ablegacy.plcType ?? "Slc500") `
+            -Address      ($config.ablegacy.address ?? "N7:5") `
+            -OpcUaUrl     ($config.ablegacy.opcUaUrl ?? $OpcUaUrl) `
+            -BridgeNodeId $config.ablegacy.bridgeNodeId
+    }
+}
+else { $summary["ablegacy"] = "SKIP (no config entry)" }
+
+# ---------------------------------------------------------------------------
+# S7
+# ---------------------------------------------------------------------------
+
+if ($config.s7) {
+    Write-Header "== S7 =="
+    Run-Suite "s7" {
+        & "$PSScriptRoot/test-s7.ps1" `
+            -S7Host       $config.s7.endpoint `
+            -Cpu          ($config.s7.cpu ?? "S71500") `
+            -Slot         ($config.s7.slot ?? 0) `
+            -Address      ($config.s7.address ?? "DB1.DBW0") `
+            -OpcUaUrl     ($config.s7.opcUaUrl ?? $OpcUaUrl) `
+            -BridgeNodeId $config.s7.bridgeNodeId
+    }
+}
+else { $summary["s7"] = "SKIP (no config entry)" }
+
+# ---------------------------------------------------------------------------
+# FOCAS
+# ---------------------------------------------------------------------------
+
+if ($config.focas) {
+    Write-Header "== FOCAS =="
+    Run-Suite "focas" {
+        & "$PSScriptRoot/test-focas.ps1" `
+            -CncHost      $config.focas.host `
+            -CncPort      ($config.focas.port ?? 8193) `
+            -Address      ($config.focas.address ?? "R100") `
+            -OpcUaUrl     ($config.focas.opcUaUrl ?? $OpcUaUrl) `
+            -BridgeNodeId $config.focas.bridgeNodeId
+    }
+}
+else { $summary["focas"] = "SKIP (no config entry)" }
+
+# ---------------------------------------------------------------------------
+# TwinCAT
+# ---------------------------------------------------------------------------
+
+if ($config.twincat) {
+    Write-Header "== TWINCAT =="
+    Run-Suite "twincat" {
+        & "$PSScriptRoot/test-twincat.ps1" `
+            -AmsNetId     $config.twincat.amsNetId `
+            -AmsPort      ($config.twincat.amsPort ?? 851) `
+            -SymbolPath   ($config.twincat.symbolPath ?? "MAIN.iCounter") `
+            -OpcUaUrl     ($config.twincat.opcUaUrl ?? $OpcUaUrl) `
+            -BridgeNodeId $config.twincat.bridgeNodeId
+    }
+}
+else { $summary["twincat"] = "SKIP (no config entry)" }
+
+# ---------------------------------------------------------------------------
+# Phase 7 virtual tags + scripted alarms
+# ---------------------------------------------------------------------------
+
+if ($config.phase7) {
+    Write-Header "== PHASE 7 virtual tags + scripted alarms =="
+    Run-Suite "phase7" {
+        & "$PSScriptRoot/test-phase7-virtualtags.ps1" `
+            -ModbusHost    ($config.phase7.modbusEndpoint ?? $config.modbus.endpoint) `
+            -OpcUaUrl      ($config.phase7.opcUaUrl ?? $OpcUaUrl) `
+            -InputNodeId   $config.phase7.inputNodeId `
+            -VirtualNodeId $config.phase7.virtualNodeId `
+            -AlarmNodeId   ($config.phase7.alarmNodeId ?? $null)
+    }
+}
+else { $summary["phase7"] = "SKIP (no config entry)" }
+
+# ---------------------------------------------------------------------------
+# Final matrix
+# ---------------------------------------------------------------------------
+
+Write-Host ""
+Write-Host "==================== FINAL MATRIX ====================" -ForegroundColor Cyan
+$summary.GetEnumerator() | ForEach-Object {
+    $color = switch -Wildcard ($_.Value) {
+        "PASS"   { "Green" }
+        "FAIL"   { "Red" }
+        "SKIP*"  { "Yellow" }
+        default  { "Gray" }
+    }
+    Write-Host ("  {0,-10} {1}" -f $_.Key, $_.Value) -ForegroundColor $color
+}
+
+$failed = ($summary.Values | Where-Object { $_ -eq "FAIL" }).Count
+if ($failed -gt 0) {
+    Write-Host "$failed suite(s) failed." -ForegroundColor Red
+    exit 1
+}
+Write-Host "All present suites passed." -ForegroundColor Green

scripts/e2e/test-focas.ps1

@@ -0,0 +1,78 @@
+#Requires -Version 7.0
+<#
+.SYNOPSIS
+  End-to-end CLI test for the FOCAS (Fanuc CNC) driver.
+
+.DESCRIPTION
+  **Hardware-gated.** There is no public FOCAS simulator; the driver's
+  FwlibFocasClient P/Invokes Fanuc's licensed Fwlib32.dll. Against a dev
+  box without the DLL on PATH the test will skip with a clear message.
+  Against a real CNC with the DLL present it runs probe / driver-loopback /
+  server-bridge the same way the other scripts do.
+
+  Set FOCAS_TRUST_WIRE=1 when -CncHost points at a real CNC to un-gate.
+
+.PARAMETER CncHost
+  IP or hostname of the CNC. Default 127.0.0.1 — override for real runs.
+
+.PARAMETER CncPort
+  FOCAS TCP port. Default 8193.
+
+.PARAMETER Address
+  FOCAS address to exercise. Default R100 (PMC R-file register).
+
+.PARAMETER OpcUaUrl
+  OtOpcUa server endpoint.
+
+.PARAMETER BridgeNodeId
+  NodeId at which the server publishes the Address.
+#>
+
+param(
+    [string]$CncHost = "127.0.0.1",
+    [int]$CncPort = 8193,
+    [string]$Address = "R100",
+    [string]$OpcUaUrl = "opc.tcp://localhost:4840",
+    [Parameter(Mandatory)] [string]$BridgeNodeId
+)
+
+$ErrorActionPreference = "Stop"
+. "$PSScriptRoot/_common.ps1"
+
+if (-not ($env:FOCAS_TRUST_WIRE -eq "1" -or $env:FOCAS_TRUST_WIRE -eq "true")) {
+    Write-Skip "FOCAS_TRUST_WIRE not set — no public simulator exists (task #222 tracks the lab rig). Set =1 when -CncHost points at a real CNC with Fwlib32.dll on PATH."
+    exit 0
+}
+
+$focasCli = Get-CliInvocation `
+    -ProjectFolder "src/ZB.MOM.WW.OtOpcUa.Driver.FOCAS.Cli" `
+    -ExeName "otopcua-focas-cli"
+$opcUaCli = Get-CliInvocation `
+    -ProjectFolder "src/ZB.MOM.WW.OtOpcUa.Client.CLI" `
+    -ExeName "otopcua-cli"
+
+$commonFocas = @("-h", $CncHost, "-p", $CncPort)
+$results = @()
+
+$results += Test-Probe `
+    -Cli $focasCli `
+    -ProbeArgs (@("probe") + $commonFocas + @("-a", $Address, "--type", "Int16"))
+
+$writeValue = Get-Random -Minimum 1 -Maximum 9999
+$results += Test-DriverLoopback `
+    -Cli $focasCli `
+    -WriteArgs (@("write") + $commonFocas + @("-a", $Address, "-t", "Int16", "-v", $writeValue)) `
+    -ReadArgs  (@("read")  + $commonFocas + @("-a", $Address, "-t", "Int16")) `
+    -ExpectedValue "$writeValue"
+
+$bridgeValue = Get-Random -Minimum 10000 -Maximum 19999
+$results += Test-ServerBridge `
+    -DriverCli $focasCli `
+    -DriverWriteArgs (@("write") + $commonFocas + @("-a", $Address, "-t", "Int16", "-v", $bridgeValue)) `
+    -OpcUaCli $opcUaCli `
+    -OpcUaUrl $OpcUaUrl `
+    -OpcUaNodeId $BridgeNodeId `
+    -ExpectedValue "$bridgeValue"
+
+Write-Summary -Title "FOCAS e2e" -Results $results
+if ($results | Where-Object { -not $_.Passed }) { exit 1 }

scripts/e2e/test-modbus.ps1

@@ -0,0 +1,74 @@
+#Requires -Version 7.0
+<#
+.SYNOPSIS
+  End-to-end CLI test for the Modbus-TCP driver bridged through the OtOpcUa server.
+
+.DESCRIPTION
+  Three assertions:
+    1. `otopcua-modbus-cli probe` hits the simulator
+    2. Driver-loopback write + read-back via modbus-cli
+    3. Bridge: modbus-cli writes HR[100], OPC UA client reads the bridged NodeId
+
+  Requires a running Modbus simulator on localhost:5502 (the pymodbus fixture
+  default per docs/drivers/Modbus-Test-Fixture.md) and a running OtOpcUa server
+  whose config DB has a Modbus DriverInstance bound to that simulator + a Tag
+  at HR[100] Int16 published under the NodeId passed via -BridgeNodeId.
+
+.PARAMETER ModbusHost
+  Host:port of the Modbus simulator. Default 127.0.0.1:5502.
+
+.PARAMETER OpcUaUrl
+  Endpoint URL of the OtOpcUa server. Default opc.tcp://localhost:4840.
+
+.PARAMETER BridgeNodeId
+  OPC UA NodeId the OtOpcUa server publishes the HR[100] tag at. Set per your
+  server config — e.g. 'ns=2;s=/warsaw/modbus-sim/HR_100'. Required.
+
+.EXAMPLE
+  .\test-modbus.ps1 -BridgeNodeId "ns=2;s=/warsaw/modbus-sim/HR_100"
+#>
+
+param(
+    [string]$ModbusHost = "127.0.0.1:5502",
+    [string]$OpcUaUrl = "opc.tcp://localhost:4840",
+    [Parameter(Mandatory)] [string]$BridgeNodeId
+)
+
+$ErrorActionPreference = "Stop"
+. "$PSScriptRoot/_common.ps1"
+
+$hostPart, $portPart = $ModbusHost.Split(":")
+$port = [int]$portPart
+
+$modbusCli = Get-CliInvocation `
+    -ProjectFolder "src/ZB.MOM.WW.OtOpcUa.Driver.Modbus.Cli" `
+    -ExeName "otopcua-modbus-cli"
+$opcUaCli = Get-CliInvocation `
+    -ProjectFolder "src/ZB.MOM.WW.OtOpcUa.Client.CLI" `
+    -ExeName "otopcua-cli"
+
+$commonModbus = @("-h", $hostPart, "-p", $port)
+$results = @()
+
+$results += Test-Probe `
+    -Cli $modbusCli `
+    -ProbeArgs (@("probe") + $commonModbus)
+
+$writeValue = Get-Random -Minimum 1 -Maximum 9999
+$results += Test-DriverLoopback `
+    -Cli $modbusCli `
+    -WriteArgs (@("write") + $commonModbus + @("-r", "HoldingRegisters", "-a", "100", "-t", "UInt16", "-v", $writeValue)) `
+    -ReadArgs  (@("read")  + $commonModbus + @("-r", "HoldingRegisters", "-a", "100", "-t", "UInt16")) `
+    -ExpectedValue "$writeValue"
+
+$bridgeValue = Get-Random -Minimum 10000 -Maximum 19999
+$results += Test-ServerBridge `
+    -DriverCli $modbusCli `
+    -DriverWriteArgs (@("write") + $commonModbus + @("-r", "HoldingRegisters", "-a", "100", "-t", "UInt16", "-v", $bridgeValue)) `
+    -OpcUaCli $opcUaCli `
+    -OpcUaUrl $OpcUaUrl `
+    -OpcUaNodeId $BridgeNodeId `
+    -ExpectedValue "$bridgeValue"
+
+Write-Summary -Title "Modbus e2e" -Results $results
+if ($results | Where-Object { -not $_.Passed }) { exit 1 }

scripts/e2e/test-phase7-virtualtags.ps1

@@ -0,0 +1,156 @@
+#Requires -Version 7.0
+<#
+.SYNOPSIS
+  End-to-end test for Phase 7 virtual tags + scripted alarms, driven via the
+  Modbus CLI.
+
+.DESCRIPTION
+  Assumes the OtOpcUa server's config DB has this Phase 7 scaffolding:
+
+    1. A Modbus DriverInstance bound to -ModbusHost, with a Tag at HR[100]
+       as UInt16 published under -InputNodeId.
+    2. A VirtualTag `VT_DoubledHR100` = `double(input)` where input is
+       HR[100], published under -VirtualNodeId.
+    3. A ScriptedAlarm `Alarm_HighHR100` that fires when VT_DoubledHR100 > 100,
+       published so the client can subscribe to AlarmConditionType events.
+
+  Three assertions:
+    1. Virtual-tag bridge — modbus-cli writes HR[100]=21, OPC UA client reads
+       VirtualNodeId + expects 42.
+    2. Alarm fire — modbus-cli writes HR[100]=60 (VT=120, above threshold),
+       OPC UA client alarms subscribe sees the condition go Active.
+    3. Alarm clear — modbus-cli writes HR[100]=10 (VT=20, below threshold),
+       OPC UA client sees the condition go back to Inactive.
+
+  See scripts/smoke/seed-phase-7-smoke.sql for the seed shape. This script
+  doesn't seed; it verifies the running state.
+
+.PARAMETER ModbusHost
+  Modbus simulator endpoint. Default 127.0.0.1:5502.
+
+.PARAMETER OpcUaUrl
+  OtOpcUa server endpoint.
+
+.PARAMETER InputNodeId
+  NodeId at which the server publishes HR[100] (the input tag).
+
+.PARAMETER VirtualNodeId
+  NodeId at which the server publishes VT_DoubledHR100.
+
+.PARAMETER AlarmNodeId
+  NodeId of the AlarmConditionType (or its source) the server publishes for
+  Alarm_HighHR100. Alarms subscribe filters by SourceNode = this NodeId.
+#>
+
+param(
+    [string]$ModbusHost = "127.0.0.1:5502",
+    [string]$OpcUaUrl = "opc.tcp://localhost:4840",
+    [Parameter(Mandatory)] [string]$InputNodeId,
+    [Parameter(Mandatory)] [string]$VirtualNodeId,
+    [string]$AlarmNodeId
+)
+
+$ErrorActionPreference = "Stop"
+. "$PSScriptRoot/_common.ps1"
+
+$hostPart, $portPart = $ModbusHost.Split(":")
+$port = [int]$portPart
+
+$modbusCli = Get-CliInvocation `
+    -ProjectFolder "src/ZB.MOM.WW.OtOpcUa.Driver.Modbus.Cli" `
+    -ExeName "otopcua-modbus-cli"
+$opcUaCli = Get-CliInvocation `
+    -ProjectFolder "src/ZB.MOM.WW.OtOpcUa.Client.CLI" `
+    -ExeName "otopcua-cli"
+
+$commonModbus = @("-h", $hostPart, "-p", $port)
+$results = @()
+
+# --- Assertion 1: virtual-tag bridge ------------------------------------------
+Write-Header "Virtual tag — VT_DoubledHR100 = HR[100] * 2"
+$inputValue = 21
+$expectedVirtual = $inputValue * 2
+
+$w = Invoke-Cli -Cli $modbusCli -Args (@("write") + $commonModbus + `
+    @("-r", "HoldingRegisters", "-a", "100", "-t", "UInt16", "-v", $inputValue))
+if ($w.ExitCode -ne 0) {
+    Write-Fail "modbus write failed (exit=$($w.ExitCode))"
+    $results += @{ Passed = $false; Reason = "seed write failed" }
+}
+else {
+    Write-Info "wrote HR[100]=$inputValue, waiting 3s for virtual-tag engine to re-evaluate"
+    Start-Sleep -Seconds 3
+    $r = Invoke-Cli -Cli $opcUaCli -Args @("read", "-u", $OpcUaUrl, "-n", $VirtualNodeId)
+    if ($r.ExitCode -eq 0 -and $r.Output -match "Value:\s+$expectedVirtual\b") {
+        Write-Pass "virtual tag = $expectedVirtual (input * 2)"
+        $results += @{ Passed = $true }
+    }
+    else {
+        Write-Fail "expected VT = $expectedVirtual; got:"
+        Write-Host $r.Output
+        $results += @{ Passed = $false; Reason = "virtual tag mismatch" }
+    }
+}
+
+# --- Assertion 2: scripted alarm fires ---------------------------------------
+if ([string]::IsNullOrWhiteSpace($AlarmNodeId)) {
+    Write-Skip "AlarmNodeId not provided — skipping alarm fire/clear assertions"
+}
+else {
+    Write-Header "Scripted alarm — fires when VT > 100"
+    $fireValue = 60   # VT = 120, above threshold
+    $w = Invoke-Cli -Cli $modbusCli -Args (@("write") + $commonModbus + `
+        @("-r", "HoldingRegisters", "-a", "100", "-t", "UInt16", "-v", $fireValue))
+    if ($w.ExitCode -ne 0) {
+        Write-Fail "modbus write failed"
+        $results += @{ Passed = $false }
+    }
+    else {
+        Write-Info "wrote HR[100]=$fireValue (VT=$($fireValue*2)); subscribing alarms for 5s"
+        # otopcua-cli's `alarms` command subscribes + prints events until an
+        # interrupt or timeout. We capture ~5s worth then parse for ActiveState.
+        $job = Start-Job -ScriptBlock {
+            param($file, $prefix, $url, $source)
+            $cmdArgs = $prefix + @("alarms", "-u", $url, "-n", $source, "--duration-seconds", "5")
+            & $file @cmdArgs 2>&1
+        } -ArgumentList $opcUaCli.File, $opcUaCli.PrefixArgs, $OpcUaUrl, $AlarmNodeId
+
+        $alarmOutput = Receive-Job -Job $job -Wait -AutoRemoveJob
+        $alarmText = ($alarmOutput | Out-String)
+        if ($alarmText -match "Active" -or $alarmText -match "HighAlarm" -or $alarmText -match "Severity") {
+            Write-Pass "alarm subscription received an event"
+            $results += @{ Passed = $true }
+        }
+        else {
+            Write-Fail "expected alarm event in subscription output"
+            Write-Host $alarmText
+            $results += @{ Passed = $false; Reason = "alarm did not fire" }
+        }
+    }
+
+    # --- Assertion 3: alarm clears ---
+    Write-Header "Scripted alarm — clears when VT falls below threshold"
+    $clearValue = 10  # VT = 20, below threshold
+    $w = Invoke-Cli -Cli $modbusCli -Args (@("write") + $commonModbus + `
+        @("-r", "HoldingRegisters", "-a", "100", "-t", "UInt16", "-v", $clearValue))
+    if ($w.ExitCode -eq 0) {
+        Write-Info "wrote HR[100]=$clearValue (VT=$($clearValue*2)); alarm should clear"
+        # We don't re-subscribe here — the clear is asserted via the virtual
+        # tag's current value (the Phase 7 engine's commitment is that state
+        # propagates on the next tick; the OPC UA alarm transition follows).
+        Start-Sleep -Seconds 3
+        $r = Invoke-Cli -Cli $opcUaCli -Args @("read", "-u", $OpcUaUrl, "-n", $VirtualNodeId)
+        if ($r.Output -match "Value:\s+$($clearValue*2)\b") {
+            Write-Pass "virtual tag returned to below-threshold ($($clearValue*2))"
+            $results += @{ Passed = $true }
+        }
+        else {
+            Write-Fail "virtual tag did not reflect cleared state"
+            Write-Host $r.Output
+            $results += @{ Passed = $false; Reason = "clear state mismatch" }
+        }
+    }
+}
+
+Write-Summary -Title "Phase 7 virtual tags + scripted alarms" -Results $results
+if ($results | Where-Object { -not $_.Passed }) { exit 1 }

scripts/e2e/test-s7.ps1

@@ -0,0 +1,82 @@
+#Requires -Version 7.0
+<#
+.SYNOPSIS
+  End-to-end CLI test for the Siemens S7 driver bridged through the OtOpcUa server.
+
+.DESCRIPTION
+  Probe + driver-loopback + server-bridge against a Siemens S7-300/400/1200/1500
+  or compatible soft-PLC. python-snap7 simulator (task #216) or real hardware
+  both work.
+
+  Prereqs:
+    - S7 simulator / PLC on $S7Host:$S7Port
+    - On real S7-1200/1500: PUT/GET communication enabled in TIA Portal.
+    - OtOpcUa server running with an S7 DriverInstance bound to the same
+      endpoint + a Tag at DB1.DBW0 Int16 published under -BridgeNodeId.
+
+.PARAMETER S7Host
+  Host:port of the S7 simulator / PLC. Default 127.0.0.1:102.
+
+.PARAMETER Cpu
+  S7200 / S7200Smart / S7300 / S7400 / S71200 / S71500 (default S71500).
+
+.PARAMETER Slot
+  CPU slot. Default 0 (S7-1200/1500). S7-300 uses 2.
+
+.PARAMETER Address
+  S7 address to exercise. Default DB1.DBW0.
+
+.PARAMETER OpcUaUrl
+  OtOpcUa server endpoint.
+
+.PARAMETER BridgeNodeId
+  NodeId at which the server publishes the Address.
+#>
+
+param(
+    [string]$S7Host = "127.0.0.1:102",
+    [string]$Cpu = "S71500",
+    [int]$Slot = 0,
+    [string]$Address = "DB1.DBW0",
+    [string]$OpcUaUrl = "opc.tcp://localhost:4840",
+    [Parameter(Mandatory)] [string]$BridgeNodeId
+)
+
+$ErrorActionPreference = "Stop"
+. "$PSScriptRoot/_common.ps1"
+
+$hostPart, $portPart = $S7Host.Split(":")
+$port = [int]$portPart
+
+$s7Cli = Get-CliInvocation `
+    -ProjectFolder "src/ZB.MOM.WW.OtOpcUa.Driver.S7.Cli" `
+    -ExeName "otopcua-s7-cli"
+$opcUaCli = Get-CliInvocation `
+    -ProjectFolder "src/ZB.MOM.WW.OtOpcUa.Client.CLI" `
+    -ExeName "otopcua-cli"
+
+$commonS7 = @("-h", $hostPart, "-p", $port, "-c", $Cpu, "--slot", $Slot)
+$results = @()
+
+$results += Test-Probe `
+    -Cli $s7Cli `
+    -ProbeArgs (@("probe") + $commonS7)
+
+$writeValue = Get-Random -Minimum 1 -Maximum 9999
+$results += Test-DriverLoopback `
+    -Cli $s7Cli `
+    -WriteArgs (@("write") + $commonS7 + @("-a", $Address, "-t", "Int16", "-v", $writeValue)) `
+    -ReadArgs  (@("read")  + $commonS7 + @("-a", $Address, "-t", "Int16")) `
+    -ExpectedValue "$writeValue"
+
+$bridgeValue = Get-Random -Minimum 10000 -Maximum 19999
+$results += Test-ServerBridge `
+    -DriverCli $s7Cli `
+    -DriverWriteArgs (@("write") + $commonS7 + @("-a", $Address, "-t", "Int16", "-v", $bridgeValue)) `
+    -OpcUaCli $opcUaCli `
+    -OpcUaUrl $OpcUaUrl `
+    -OpcUaNodeId $BridgeNodeId `
+    -ExpectedValue "$bridgeValue"
+
+Write-Summary -Title "S7 e2e" -Results $results
+if ($results | Where-Object { -not $_.Passed }) { exit 1 }

scripts/e2e/test-twincat.ps1

@@ -0,0 +1,81 @@
+#Requires -Version 7.0
+<#
+.SYNOPSIS
+  End-to-end CLI test for the TwinCAT (Beckhoff ADS) driver.
+
+.DESCRIPTION
+  Requires a reachable AMS router (local TwinCAT XAR, Beckhoff.TwinCAT.Ads.
+  TcpRouter NuGet, or an authorised remote AMS route) + a live TwinCAT
+  runtime on -AmsNetId. Without one the driver surfaces a transport error
+  on InitializeAsync + the script's probe fails.
+
+  Set TWINCAT_TRUST_WIRE=1 to promise the endpoint is live. Without it the
+  script skips (task #221 tracks the 7-day-trial CI fixture — until that
+  lands, TwinCAT testing is a manual operator task).
+
+.PARAMETER AmsNetId
+  AMS Net ID of the target (e.g. 127.0.0.1.1.1 for local XAR,
+  192.168.1.40.1.1 for a remote PLC).
+
+.PARAMETER AmsPort
+  AMS port. Default 851 (TC3 PLC runtime). TC2 uses 801.
+
+.PARAMETER SymbolPath
+  TwinCAT symbol to exercise. Default 'MAIN.iCounter' — substitute with
+  whatever your project actually declares.
+
+.PARAMETER OpcUaUrl
+  OtOpcUa server endpoint.
+
+.PARAMETER BridgeNodeId
+  NodeId at which the server publishes the Symbol.
+#>
+
+param(
+    [string]$AmsNetId = "127.0.0.1.1.1",
+    [int]$AmsPort = 851,
+    [string]$SymbolPath = "MAIN.iCounter",
+    [string]$OpcUaUrl = "opc.tcp://localhost:4840",
+    [Parameter(Mandatory)] [string]$BridgeNodeId
+)
+
+$ErrorActionPreference = "Stop"
+. "$PSScriptRoot/_common.ps1"
+
+if (-not ($env:TWINCAT_TRUST_WIRE -eq "1" -or $env:TWINCAT_TRUST_WIRE -eq "true")) {
+    Write-Skip "TWINCAT_TRUST_WIRE not set — requires reachable AMS router + live TC runtime (task #221 tracks the CI fixture). Set =1 once the router is up."
+    exit 0
+}
+
+$twinCatCli = Get-CliInvocation `
+    -ProjectFolder "src/ZB.MOM.WW.OtOpcUa.Driver.TwinCAT.Cli" `
+    -ExeName "otopcua-twincat-cli"
+$opcUaCli = Get-CliInvocation `
+    -ProjectFolder "src/ZB.MOM.WW.OtOpcUa.Client.CLI" `
+    -ExeName "otopcua-cli"
+
+$commonTc = @("-n", $AmsNetId, "-p", $AmsPort)
+$results = @()
+
+$results += Test-Probe `
+    -Cli $twinCatCli `
+    -ProbeArgs (@("probe") + $commonTc + @("-s", $SymbolPath, "--type", "DInt"))
+
+$writeValue = Get-Random -Minimum 1 -Maximum 9999
+$results += Test-DriverLoopback `
+    -Cli $twinCatCli `
+    -WriteArgs (@("write") + $commonTc + @("-s", $SymbolPath, "-t", "DInt", "-v", $writeValue)) `
+    -ReadArgs  (@("read")  + $commonTc + @("-s", $SymbolPath, "-t", "DInt")) `
+    -ExpectedValue "$writeValue"
+
+$bridgeValue = Get-Random -Minimum 10000 -Maximum 19999
+$results += Test-ServerBridge `
+    -DriverCli $twinCatCli `
+    -DriverWriteArgs (@("write") + $commonTc + @("-s", $SymbolPath, "-t", "DInt", "-v", $bridgeValue)) `
+    -OpcUaCli $opcUaCli `
+    -OpcUaUrl $OpcUaUrl `
+    -OpcUaNodeId $BridgeNodeId `
+    -ExpectedValue "$bridgeValue"
+
+Write-Summary -Title "TwinCAT e2e" -Results $results
+if ($results | Where-Object { -not $_.Passed }) { exit 1 }

src/ZB.MOM.WW.OtOpcUa.Driver.FOCAS.Cli/Commands/ProbeCommand.cs

@@ -0,0 +1,57 @@
+using CliFx.Attributes;
+using CliFx.Infrastructure;
+using ZB.MOM.WW.OtOpcUa.Driver.Cli.Common;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.FOCAS.Cli.Commands;
+
+/// <summary>
+///     Probes a Fanuc CNC: opens a FOCAS session + reads one PMC address. No public
+///     simulator exists — this command only produces meaningful results against a real
+///     CNC with Fwlib32.dll present. Against a dev box it surfaces
+///     <c>BadCommunicationError</c> (DLL missing) which is still a useful signal that
+///     the CLI wire-up is correct.
+/// </summary>
+[Command("probe", Description = "Verify the CNC is reachable + a sample FOCAS read succeeds.")]
+public sealed class ProbeCommand : FocasCommandBase
+{
+    [CommandOption("address", 'a', Description =
+        "FOCAS address to probe (default R100 — PMC R-file register 100).")]
+    public string Address { get; init; } = "R100";
+
+    [CommandOption("type", Description = "Data type (default Int16).")]
+    public FocasDataType DataType { get; init; } = FocasDataType.Int16;
+
+    public override async ValueTask ExecuteAsync(IConsole console)
+    {
+        ConfigureLogging();
+        var ct = console.RegisterCancellationHandler();
+
+        var probeTag = new FocasTagDefinition(
+            Name: "__probe",
+            DeviceHostAddress: HostAddress,
+            Address: Address,
+            DataType: DataType,
+            Writable: false);
+        var options = BuildOptions([probeTag]);
+
+        await using var driver = new FocasDriver(options, DriverInstanceId);
+        try
+        {
+            await driver.InitializeAsync("{}", ct);
+            var snapshot = await driver.ReadAsync(["__probe"], ct);
+            var health = driver.GetHealth();
+
+            await console.Output.WriteLineAsync($"CNC:          {CncHost}:{CncPort}");
+            await console.Output.WriteLineAsync($"Series:       {Series}");
+            await console.Output.WriteLineAsync($"Health:       {health.State}");
+            if (health.LastError is { } err)
+                await console.Output.WriteLineAsync($"Last error:   {err}");
+            await console.Output.WriteLineAsync();
+            await console.Output.WriteLineAsync(SnapshotFormatter.Format(Address, snapshot[0]));
+        }
+        finally
+        {
+            await driver.ShutdownAsync(CancellationToken.None);
+        }
+    }
+}

src/ZB.MOM.WW.OtOpcUa.Driver.FOCAS.Cli/Commands/ReadCommand.cs

@@ -0,0 +1,52 @@
+using CliFx.Attributes;
+using CliFx.Infrastructure;
+using ZB.MOM.WW.OtOpcUa.Driver.Cli.Common;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.FOCAS.Cli.Commands;
+
+/// <summary>
+///     Read one FOCAS address (PMC R/G/F file, parameter, macro, axis register).
+/// </summary>
+[Command("read", Description = "Read a single FOCAS address.")]
+public sealed class ReadCommand : FocasCommandBase
+{
+    [CommandOption("address", 'a', Description =
+        "FOCAS address. Examples: R100 (PMC R-file word); X0.0 (PMC X-bit); " +
+        "PARAM:1815/0 (parameter 1815, axis 0); MACRO:500 (macro variable 500).",
+        IsRequired = true)]
+    public string Address { get; init; } = default!;
+
+    [CommandOption("type", 't', Description =
+        "Bit / Byte / Int16 / Int32 / Float32 / Float64 / String (default Int16).")]
+    public FocasDataType DataType { get; init; } = FocasDataType.Int16;
+
+    public override async ValueTask ExecuteAsync(IConsole console)
+    {
+        ConfigureLogging();
+        var ct = console.RegisterCancellationHandler();
+
+        var tagName = SynthesiseTagName(Address, DataType);
+        var tag = new FocasTagDefinition(
+            Name: tagName,
+            DeviceHostAddress: HostAddress,
+            Address: Address,
+            DataType: DataType,
+            Writable: false);
+        var options = BuildOptions([tag]);
+
+        await using var driver = new FocasDriver(options, DriverInstanceId);
+        try
+        {
+            await driver.InitializeAsync("{}", ct);
+            var snapshot = await driver.ReadAsync([tagName], ct);
+            await console.Output.WriteLineAsync(SnapshotFormatter.Format(Address, snapshot[0]));
+        }
+        finally
+        {
+            await driver.ShutdownAsync(CancellationToken.None);
+        }
+    }
+
+    internal static string SynthesiseTagName(string address, FocasDataType type)
+        => $"{address}:{type}";
+}

src/ZB.MOM.WW.OtOpcUa.Driver.FOCAS.Cli/Commands/SubscribeCommand.cs

@@ -0,0 +1,76 @@
+using CliFx.Attributes;
+using CliFx.Infrastructure;
+using ZB.MOM.WW.OtOpcUa.Core.Abstractions;
+using ZB.MOM.WW.OtOpcUa.Driver.Cli.Common;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.FOCAS.Cli.Commands;
+
+/// <summary>
+///     Watch a FOCAS address via polled subscription until Ctrl+C. FOCAS has no push
+///     model; <c>PollGroupEngine</c> handles the tick loop.
+/// </summary>
+[Command("subscribe", Description = "Watch a FOCAS address via polled subscription until Ctrl+C.")]
+public sealed class SubscribeCommand : FocasCommandBase
+{
+    [CommandOption("address", 'a', Description = "FOCAS address — same format as `read`.", IsRequired = true)]
+    public string Address { get; init; } = default!;
+
+    [CommandOption("type", 't', Description =
+        "Bit / Byte / Int16 / Int32 / Float32 / Float64 / String (default Int16).")]
+    public FocasDataType DataType { get; init; } = FocasDataType.Int16;
+
+    [CommandOption("interval-ms", 'i', Description = "Publishing interval ms (default 1000).")]
+    public int IntervalMs { get; init; } = 1000;
+
+    public override async ValueTask ExecuteAsync(IConsole console)
+    {
+        ConfigureLogging();
+        var ct = console.RegisterCancellationHandler();
+
+        var tagName = ReadCommand.SynthesiseTagName(Address, DataType);
+        var tag = new FocasTagDefinition(
+            Name: tagName,
+            DeviceHostAddress: HostAddress,
+            Address: Address,
+            DataType: DataType,
+            Writable: false);
+        var options = BuildOptions([tag]);
+
+        await using var driver = new FocasDriver(options, DriverInstanceId);
+        ISubscriptionHandle? handle = null;
+        try
+        {
+            await driver.InitializeAsync("{}", ct);
+
+            driver.OnDataChange += (_, e) =>
+            {
+                var line = $"[{DateTime.UtcNow:HH:mm:ss.fff}] " +
+                    $"{e.FullReference} = {SnapshotFormatter.FormatValue(e.Snapshot.Value)} " +
+                    $"({SnapshotFormatter.FormatStatus(e.Snapshot.StatusCode)})";
+                console.Output.WriteLine(line);
+            };
+
+            handle = await driver.SubscribeAsync([tagName], TimeSpan.FromMilliseconds(IntervalMs), ct);
+
+            await console.Output.WriteLineAsync(
+                $"Subscribed to {Address} @ {IntervalMs}ms. Ctrl+C to stop.");
+            try
+            {
+                await Task.Delay(System.Threading.Timeout.InfiniteTimeSpan, ct);
+            }
+            catch (OperationCanceledException)
+            {
+                // Expected on Ctrl+C.
+            }
+        }
+        finally
+        {
+            if (handle is not null)
+            {
+                try { await driver.UnsubscribeAsync(handle, CancellationToken.None); }
+                catch { /* teardown best-effort */ }
+            }
+            await driver.ShutdownAsync(CancellationToken.None);
+        }
+    }
+}

src/ZB.MOM.WW.OtOpcUa.Driver.FOCAS.Cli/Commands/WriteCommand.cs

@@ -0,0 +1,77 @@
+using System.Globalization;
+using CliFx.Attributes;
+using CliFx.Infrastructure;
+using ZB.MOM.WW.OtOpcUa.Core.Abstractions;
+using ZB.MOM.WW.OtOpcUa.Driver.Cli.Common;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.FOCAS.Cli.Commands;
+
+/// <summary>
+///     Write one value to a FOCAS address. PMC G/R writes are real — be careful
+///     which file you hit on a running machine. Parameter writes may require the
+///     CNC to be in MDI mode + the parameter-write switch enabled.
+/// </summary>
+[Command("write", Description = "Write a single FOCAS address.")]
+public sealed class WriteCommand : FocasCommandBase
+{
+    [CommandOption("address", 'a', Description = "FOCAS address — same format as `read`.", IsRequired = true)]
+    public string Address { get; init; } = default!;
+
+    [CommandOption("type", 't', Description =
+        "Bit / Byte / Int16 / Int32 / Float32 / Float64 / String (default Int16).")]
+    public FocasDataType DataType { get; init; } = FocasDataType.Int16;
+
+    [CommandOption("value", 'v', Description =
+        "Value to write. Parsed per --type (booleans accept true/false/1/0).",
+        IsRequired = true)]
+    public string Value { get; init; } = default!;
+
+    public override async ValueTask ExecuteAsync(IConsole console)
+    {
+        ConfigureLogging();
+        var ct = console.RegisterCancellationHandler();
+
+        var tagName = ReadCommand.SynthesiseTagName(Address, DataType);
+        var tag = new FocasTagDefinition(
+            Name: tagName,
+            DeviceHostAddress: HostAddress,
+            Address: Address,
+            DataType: DataType,
+            Writable: true);
+        var options = BuildOptions([tag]);
+
+        var parsed = ParseValue(Value, DataType);
+
+        await using var driver = new FocasDriver(options, DriverInstanceId);
+        try
+        {
+            await driver.InitializeAsync("{}", ct);
+            var results = await driver.WriteAsync([new WriteRequest(tagName, parsed)], ct);
+            await console.Output.WriteLineAsync(SnapshotFormatter.FormatWrite(Address, results[0]));
+        }
+        finally
+        {
+            await driver.ShutdownAsync(CancellationToken.None);
+        }
+    }
+
+    internal static object ParseValue(string raw, FocasDataType type) => type switch
+    {
+        FocasDataType.Bit => ParseBool(raw),
+        FocasDataType.Byte => sbyte.Parse(raw, CultureInfo.InvariantCulture),
+        FocasDataType.Int16 => short.Parse(raw, CultureInfo.InvariantCulture),
+        FocasDataType.Int32 => int.Parse(raw, CultureInfo.InvariantCulture),
+        FocasDataType.Float32 => float.Parse(raw, CultureInfo.InvariantCulture),
+        FocasDataType.Float64 => double.Parse(raw, CultureInfo.InvariantCulture),
+        FocasDataType.String => raw,
+        _ => throw new CliFx.Exceptions.CommandException($"Unsupported DataType '{type}' for write."),
+    };
+
+    private static bool ParseBool(string raw) => raw.Trim().ToLowerInvariant() switch
+    {
+        "1" or "true" or "on" or "yes" => true,
+        "0" or "false" or "off" or "no" => false,
+        _ => throw new CliFx.Exceptions.CommandException(
+            $"Boolean value '{raw}' is not recognised. Use true/false, 1/0, on/off, or yes/no."),
+    };
+}

src/ZB.MOM.WW.OtOpcUa.Driver.FOCAS.Cli/FocasCommandBase.cs

@@ -0,0 +1,58 @@
+using CliFx.Attributes;
+using ZB.MOM.WW.OtOpcUa.Driver.Cli.Common;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.FOCAS.Cli;
+
+/// <summary>
+///     Base for every FOCAS CLI command. Carries the CNC endpoint options
+///     (host / port / series) + exposes <see cref="BuildOptions"/> so each command
+///     can synthesise a <see cref="FocasDriverOptions"/> with one device + one tag.
+/// </summary>
+public abstract class FocasCommandBase : DriverCommandBase
+{
+    [CommandOption("cnc-host", 'h', Description =
+        "CNC IP address or hostname. FOCAS-over-EIP listens on port 8193 by default.",
+        IsRequired = true)]
+    public string CncHost { get; init; } = default!;
+
+    [CommandOption("cnc-port", 'p', Description = "FOCAS TCP port (default 8193).")]
+    public int CncPort { get; init; } = 8193;
+
+    [CommandOption("series", 's', Description =
+        "CNC series: Unknown / Zero_i_D / Zero_i_F / Zero_i_MF / Zero_i_TF / Sixteen_i / " +
+        "Thirty_i / ThirtyOne_i / ThirtyTwo_i / PowerMotion_i (default Unknown).")]
+    public FocasCncSeries Series { get; init; } = FocasCncSeries.Unknown;
+
+    [CommandOption("timeout-ms", Description = "Per-operation timeout in ms (default 2000).")]
+    public int TimeoutMs { get; init; } = 2000;
+
+    /// <inheritdoc />
+    public override TimeSpan Timeout
+    {
+        get => TimeSpan.FromMilliseconds(TimeoutMs);
+        init { /* driven by TimeoutMs */ }
+    }
+
+    /// <summary>Canonical FOCAS host-address string, shape <c>focas://host:port</c>.</summary>
+    protected string HostAddress => $"focas://{CncHost}:{CncPort}";
+
+    /// <summary>
+    ///     Build a <see cref="FocasDriverOptions"/> with the CNC target this base collected
+    ///     + the tag list a subclass supplies. Probe disabled; the default
+    ///     <see cref="FwlibFocasClientFactory"/> attempts <c>Fwlib32.dll</c> P/Invoke, which
+    ///     throws <see cref="DllNotFoundException"/> at first call when the DLL is absent —
+    ///     surfaced through the driver as <c>BadCommunicationError</c>.
+    /// </summary>
+    protected FocasDriverOptions BuildOptions(IReadOnlyList<FocasTagDefinition> tags) => new()
+    {
+        Devices = [new FocasDeviceOptions(
+            HostAddress: HostAddress,
+            DeviceName: $"cli-{CncHost}:{CncPort}",
+            Series: Series)],
+        Tags = tags,
+        Timeout = Timeout,
+        Probe = new FocasProbeOptions { Enabled = false },
+    };
+
+    protected string DriverInstanceId => $"focas-cli-{CncHost}:{CncPort}";
+}

src/ZB.MOM.WW.OtOpcUa.Driver.FOCAS.Cli/Program.cs

@@ -0,0 +1,12 @@
+using CliFx;
+
+return await new CliApplicationBuilder()
+    .AddCommandsFromThisAssembly()
+    .SetExecutableName("otopcua-focas-cli")
+    .SetDescription(
+        "OtOpcUa FOCAS test-client — ad-hoc probe + PMC/param/macro reads/writes + polled " +
+        "subscriptions against Fanuc CNCs via the FOCAS/2 protocol. Requires a real CNC + a " +
+        "licensed Fwlib32.dll on PATH (or next to the executable) — no public simulator " +
+        "exists. Addresses use FocasAddressParser syntax: R100, X0.0, PARAM:1815/0, MACRO:500.")
+    .Build()
+    .RunAsync(args);

src/ZB.MOM.WW.OtOpcUa.Driver.FOCAS.Cli/ZB.MOM.WW.OtOpcUa.Driver.FOCAS.Cli.csproj

@@ -0,0 +1,25 @@
+<Project Sdk="Microsoft.NET.Sdk">
+
+    <PropertyGroup>
+        <OutputType>Exe</OutputType>
+        <TargetFramework>net10.0</TargetFramework>
+        <Nullable>enable</Nullable>
+        <ImplicitUsings>enable</ImplicitUsings>
+        <LangVersion>latest</LangVersion>
+        <TreatWarningsAsErrors>true</TreatWarningsAsErrors>
+        <GenerateDocumentationFile>true</GenerateDocumentationFile>
+        <NoWarn>$(NoWarn);CS1591</NoWarn>
+        <RootNamespace>ZB.MOM.WW.OtOpcUa.Driver.FOCAS.Cli</RootNamespace>
+        <AssemblyName>otopcua-focas-cli</AssemblyName>
+    </PropertyGroup>
+
+    <ItemGroup>
+        <PackageReference Include="CliFx" Version="2.3.6"/>
+    </ItemGroup>
+
+    <ItemGroup>
+        <ProjectReference Include="..\ZB.MOM.WW.OtOpcUa.Driver.Cli.Common\ZB.MOM.WW.OtOpcUa.Driver.Cli.Common.csproj"/>
+        <ProjectReference Include="..\ZB.MOM.WW.OtOpcUa.Driver.FOCAS\ZB.MOM.WW.OtOpcUa.Driver.FOCAS.csproj"/>
+    </ItemGroup>
+
+</Project>