Task #253 — E2E CLI test scripts + FOCAS test-client CLI

The driver-layer integration tests confirm the driver sees the PLC, and
the Client.CLI tests confirm the client sees the server. Nothing glued
them end-to-end until this PR.

- scripts/e2e/_common.ps1: shared helpers — CLI invocation (published-
  binary OR `dotnet run` fallback), Test-Probe / Test-DriverLoopback /
  Test-ServerBridge (all return @{Passed;Reason} hashtables).
- scripts/e2e/test-<modbus|abcip|ablegacy|s7|focas|twincat>.ps1: per-
  driver three-stage script (probe → driver-loopback → server-bridge).
  AB Legacy / FOCAS / TwinCAT are gated behind *_TRUST_WIRE env vars
  since they need real hardware (#222) or a licensed runtime (#221).
- scripts/e2e/test-phase7-virtualtags.ps1: writes a Modbus HR, reads
  the server-side VirtualTag (VT = input * 2) back via OPC UA, triggers
  + clears a scripted alarm. Exercises the Phase 7 CachedTagUpstreamSource
  + ScriptedAlarmEngine path.
- scripts/e2e/test-all.ps1: reads e2e-config.json sidecar, runs each
  present driver, prints a FINAL MATRIX (PASS/FAIL/SKIP). Missing
  sections SKIP rather than fail hard.
- scripts/e2e/e2e-config.sample.json: commented sample — each dev's
  NodeIds are local-seed-specific so e2e-config.json is .gitignore-d.
- scripts/e2e/README.md: full walkthrough — prereqs, three-stage design,
  env-var gates, expected matrix, why this is separate from `dotnet test`.

Tasks #249-#251 shipped Modbus/AbCip/AbLegacy/S7/TwinCAT CLIs but left
FOCAS out. Since test-focas.ps1 needs it, the 6th CLI ships here:

- src/ZB.MOM.WW.OtOpcUa.Driver.FOCAS.Cli: probe/read/write/subscribe
  commands, AssemblyName `otopcua-focas-cli`. WriteCommand.ParseValue
  handles the full FocasDataType enum (Bit/Byte/Int16/Int32/Float32/
  Float64/String — no UInt variants; the FOCAS protocol exposes signed
  PMC + Fanuc-Float only). Default DataType is Int16 to match the PMC
  register convention.

Full-solution build clean (0 errors). FOCAS CLI wired into
ZB.MOM.WW.OtOpcUa.slnx. No .Tests project for the FOCAS CLI yet —
symmetric with how ProbeCommand has no unit-testable pure logic in the
other 5 CLIs either; WriteCommand.ParseValue parity will land in a
follow-up to keep this PR scoped.

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>

scripts/e2e/test-s7.ps1

@@ -0,0 +1,82 @@
+#Requires -Version 7.0
+<#
+.SYNOPSIS
+  End-to-end CLI test for the Siemens S7 driver bridged through the OtOpcUa server.
+
+.DESCRIPTION
+  Probe + driver-loopback + server-bridge against a Siemens S7-300/400/1200/1500
+  or compatible soft-PLC. python-snap7 simulator (task #216) or real hardware
+  both work.
+
+  Prereqs:
+    - S7 simulator / PLC on $S7Host:$S7Port
+    - On real S7-1200/1500: PUT/GET communication enabled in TIA Portal.
+    - OtOpcUa server running with an S7 DriverInstance bound to the same
+      endpoint + a Tag at DB1.DBW0 Int16 published under -BridgeNodeId.
+
+.PARAMETER S7Host
+  Host:port of the S7 simulator / PLC. Default 127.0.0.1:102.
+
+.PARAMETER Cpu
+  S7200 / S7200Smart / S7300 / S7400 / S71200 / S71500 (default S71500).
+
+.PARAMETER Slot
+  CPU slot. Default 0 (S7-1200/1500). S7-300 uses 2.
+
+.PARAMETER Address
+  S7 address to exercise. Default DB1.DBW0.
+
+.PARAMETER OpcUaUrl
+  OtOpcUa server endpoint.
+
+.PARAMETER BridgeNodeId
+  NodeId at which the server publishes the Address.
+#>
+
+param(
+    [string]$S7Host = "127.0.0.1:102",
+    [string]$Cpu = "S71500",
+    [int]$Slot = 0,
+    [string]$Address = "DB1.DBW0",
+    [string]$OpcUaUrl = "opc.tcp://localhost:4840",
+    [Parameter(Mandatory)] [string]$BridgeNodeId
+)
+
+$ErrorActionPreference = "Stop"
+. "$PSScriptRoot/_common.ps1"
+
+$hostPart, $portPart = $S7Host.Split(":")
+$port = [int]$portPart
+
+$s7Cli = Get-CliInvocation `
+    -ProjectFolder "src/ZB.MOM.WW.OtOpcUa.Driver.S7.Cli" `
+    -ExeName "otopcua-s7-cli"
+$opcUaCli = Get-CliInvocation `
+    -ProjectFolder "src/ZB.MOM.WW.OtOpcUa.Client.CLI" `
+    -ExeName "otopcua-cli"
+
+$commonS7 = @("-h", $hostPart, "-p", $port, "-c", $Cpu, "--slot", $Slot)
+$results = @()
+
+$results += Test-Probe `
+    -Cli $s7Cli `
+    -ProbeArgs (@("probe") + $commonS7)
+
+$writeValue = Get-Random -Minimum 1 -Maximum 9999
+$results += Test-DriverLoopback `
+    -Cli $s7Cli `
+    -WriteArgs (@("write") + $commonS7 + @("-a", $Address, "-t", "Int16", "-v", $writeValue)) `
+    -ReadArgs  (@("read")  + $commonS7 + @("-a", $Address, "-t", "Int16")) `
+    -ExpectedValue "$writeValue"
+
+$bridgeValue = Get-Random -Minimum 10000 -Maximum 19999
+$results += Test-ServerBridge `
+    -DriverCli $s7Cli `
+    -DriverWriteArgs (@("write") + $commonS7 + @("-a", $Address, "-t", "Int16", "-v", $bridgeValue)) `
+    -OpcUaCli $opcUaCli `
+    -OpcUaUrl $OpcUaUrl `
+    -OpcUaNodeId $BridgeNodeId `
+    -ExpectedValue "$bridgeValue"
+
+Write-Summary -Title "S7 e2e" -Results $results
+if ($results | Where-Object { -not $_.Passed }) { exit 1 }