Task #253 — E2E CLI test scripts + FOCAS test-client CLI

The driver-layer integration tests confirm the driver sees the PLC, and
the Client.CLI tests confirm the client sees the server. Nothing glued
them end-to-end until this PR.

- scripts/e2e/_common.ps1: shared helpers — CLI invocation (published-
  binary OR `dotnet run` fallback), Test-Probe / Test-DriverLoopback /
  Test-ServerBridge (all return @{Passed;Reason} hashtables).
- scripts/e2e/test-<modbus|abcip|ablegacy|s7|focas|twincat>.ps1: per-
  driver three-stage script (probe → driver-loopback → server-bridge).
  AB Legacy / FOCAS / TwinCAT are gated behind *_TRUST_WIRE env vars
  since they need real hardware (#222) or a licensed runtime (#221).
- scripts/e2e/test-phase7-virtualtags.ps1: writes a Modbus HR, reads
  the server-side VirtualTag (VT = input * 2) back via OPC UA, triggers
  + clears a scripted alarm. Exercises the Phase 7 CachedTagUpstreamSource
  + ScriptedAlarmEngine path.
- scripts/e2e/test-all.ps1: reads e2e-config.json sidecar, runs each
  present driver, prints a FINAL MATRIX (PASS/FAIL/SKIP). Missing
  sections SKIP rather than fail hard.
- scripts/e2e/e2e-config.sample.json: commented sample — each dev's
  NodeIds are local-seed-specific so e2e-config.json is .gitignore-d.
- scripts/e2e/README.md: full walkthrough — prereqs, three-stage design,
  env-var gates, expected matrix, why this is separate from `dotnet test`.

Tasks #249-#251 shipped Modbus/AbCip/AbLegacy/S7/TwinCAT CLIs but left
FOCAS out. Since test-focas.ps1 needs it, the 6th CLI ships here:

- src/ZB.MOM.WW.OtOpcUa.Driver.FOCAS.Cli: probe/read/write/subscribe
  commands, AssemblyName `otopcua-focas-cli`. WriteCommand.ParseValue
  handles the full FocasDataType enum (Bit/Byte/Int16/Int32/Float32/
  Float64/String — no UInt variants; the FOCAS protocol exposes signed
  PMC + Fanuc-Float only). Default DataType is Int16 to match the PMC
  register convention.

Full-solution build clean (0 errors). FOCAS CLI wired into
ZB.MOM.WW.OtOpcUa.slnx. No .Tests project for the FOCAS CLI yet —
symmetric with how ProbeCommand has no unit-testable pure logic in the
other 5 CLIs either; WriteCommand.ParseValue parity will land in a
follow-up to keep this PR scoped.

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>

scripts/e2e/_common.ps1

@@ -0,0 +1,219 @@
+# Shared PowerShell helpers for the OtOpcUa end-to-end CLI test scripts.
+#
+# Every per-protocol script dot-sources this file and calls the Test-* functions
+# below. Keeps the per-script code down to ~50 lines of parameterisation +
+# bridging-tag identifiers.
+#
+# Conventions:
+#   - All test helpers return a hashtable: @{ Passed=<bool>; Reason=<string> }
+#   - Helpers never throw unless the test setup is itself broken (a crashed
+#     CLI is a test failure, not an exception).
+#   - Output is plain text with [PASS] / [FAIL] / [SKIP] / [INFO] prefixes so
+#     grep/log-scraping works.
+
+Set-StrictMode -Version 3.0
+
+# ---------------------------------------------------------------------------
+# Colouring + prefixes.
+# ---------------------------------------------------------------------------
+
+function Write-Header {
+    param([string]$Title)
+    Write-Host ""
+    Write-Host "=== $Title ===" -ForegroundColor Cyan
+}
+
+function Write-Pass {
+    param([string]$Message)
+    Write-Host "[PASS] $Message" -ForegroundColor Green
+}
+
+function Write-Fail {
+    param([string]$Message)
+    Write-Host "[FAIL] $Message" -ForegroundColor Red
+}
+
+function Write-Skip {
+    param([string]$Message)
+    Write-Host "[SKIP] $Message" -ForegroundColor Yellow
+}
+
+function Write-Info {
+    param([string]$Message)
+    Write-Host "[INFO] $Message" -ForegroundColor Gray
+}
+
+# ---------------------------------------------------------------------------
+# CLI invocation helpers.
+# ---------------------------------------------------------------------------
+
+# Resolve a CLI path from either a published binary OR a `dotnet run` fallback.
+# Preferred order:
+#   1. $env:OTOPCUA_CLI_BIN points at a publish/ folder → use <exe> there
+#   2. Fall back to `dotnet run --project src/<ProjectFolder> --`
+#
+# $ProjectFolder = relative path from repo root
+# $ExeName       = expected AssemblyName (no .exe)
+function Get-CliInvocation {
+    param(
+        [Parameter(Mandatory)] [string]$ProjectFolder,
+        [Parameter(Mandatory)] [string]$ExeName
+    )
+
+    if ($env:OTOPCUA_CLI_BIN) {
+        $binPath = Join-Path $env:OTOPCUA_CLI_BIN "$ExeName.exe"
+        if (Test-Path $binPath) {
+            return @{ File = $binPath; PrefixArgs = @() }
+        }
+    }
+
+    # Dotnet-run fallback. --no-build would be faster but not every CI step
+    # has rebuilt; default to a full run so the script is forgiving.
+    return @{
+        File       = "dotnet"
+        PrefixArgs = @("run", "--project", $ProjectFolder, "--")
+    }
+}
+
+# Run a CLI and capture stdout+stderr+exitcode. Never throws.
+function Invoke-Cli {
+    param(
+        [Parameter(Mandatory)] $Cli,            # output of Get-CliInvocation
+        [Parameter(Mandatory)] [string[]]$Args, # CLI arguments (after `-- `)
+        [int]$TimeoutSec = 30
+    )
+
+    $allArgs = @($Cli.PrefixArgs) + $Args
+    $output = $null
+    $exitCode = -1
+
+    try {
+        $output = & $Cli.File @allArgs 2>&1 | Out-String
+        $exitCode = $LASTEXITCODE
+    }
+    catch {
+        return @{
+            Output   = $_.Exception.Message
+            ExitCode = -1
+        }
+    }
+
+    return @{
+        Output   = $output
+        ExitCode = $exitCode
+    }
+}
+
+# ---------------------------------------------------------------------------
+# Test helpers — reusable building blocks every per-protocol script calls.
+# ---------------------------------------------------------------------------
+
+# Test 1 — the driver CLI's probe command exits 0. Confirms the PLC / simulator
+# is reachable and speaks the protocol. Prerequisite for everything else.
+function Test-Probe {
+    param(
+        [Parameter(Mandatory)] $Cli,
+        [Parameter(Mandatory)] [string[]]$ProbeArgs
+    )
+    Write-Header "Probe"
+    $r = Invoke-Cli -Cli $Cli -Args $ProbeArgs
+    if ($r.ExitCode -eq 0) {
+        Write-Pass "driver CLI probe succeeded"
+        return @{ Passed = $true }
+    }
+    Write-Fail "driver CLI probe exit=$($r.ExitCode)"
+    Write-Host $r.Output
+    return @{ Passed = $false; Reason = "probe exit $($r.ExitCode)" }
+}
+
+# Test 2 — driver-loopback. Write a value via the driver CLI, read it back via
+# the same CLI, assert round-trip equality. Confirms the driver itself is
+# functional without pulling the OtOpcUa server into the loop.
+function Test-DriverLoopback {
+    param(
+        [Parameter(Mandatory)] $Cli,
+        [Parameter(Mandatory)] [string[]]$WriteArgs,
+        [Parameter(Mandatory)] [string[]]$ReadArgs,
+        [Parameter(Mandatory)] [string]$ExpectedValue
+    )
+    Write-Header "Driver loopback"
+
+    $w = Invoke-Cli -Cli $Cli -Args $WriteArgs
+    if ($w.ExitCode -ne 0) {
+        Write-Fail "write failed (exit=$($w.ExitCode))"
+        Write-Host $w.Output
+        return @{ Passed = $false; Reason = "write failed" }
+    }
+    Write-Info "write ok"
+
+    $r = Invoke-Cli -Cli $Cli -Args $ReadArgs
+    if ($r.ExitCode -ne 0) {
+        Write-Fail "read failed (exit=$($r.ExitCode))"
+        Write-Host $r.Output
+        return @{ Passed = $false; Reason = "read failed" }
+    }
+
+    if ($r.Output -match "Value:\s+$([Regex]::Escape($ExpectedValue))\b") {
+        Write-Pass "round-trip equals $ExpectedValue"
+        return @{ Passed = $true }
+    }
+    Write-Fail "round-trip value mismatch — expected $ExpectedValue"
+    Write-Host $r.Output
+    return @{ Passed = $false; Reason = "value mismatch" }
+}
+
+# Test 3 — server bridge. Write via the driver CLI, read the corresponding
+# OPC UA NodeId via the OPC UA client CLI. Confirms the full path:
+#   driver CLI → PLC → OtOpcUa server (polling/subscription) → OPC UA client.
+function Test-ServerBridge {
+    param(
+        [Parameter(Mandatory)] $DriverCli,
+        [Parameter(Mandatory)] [string[]]$DriverWriteArgs,
+        [Parameter(Mandatory)] $OpcUaCli,
+        [Parameter(Mandatory)] [string]$OpcUaUrl,
+        [Parameter(Mandatory)] [string]$OpcUaNodeId,
+        [Parameter(Mandatory)] [string]$ExpectedValue,
+        [int]$ServerPollDelaySec = 3
+    )
+    Write-Header "Server bridge"
+
+    $w = Invoke-Cli -Cli $DriverCli -Args $DriverWriteArgs
+    if ($w.ExitCode -ne 0) {
+        Write-Fail "driver-side write failed (exit=$($w.ExitCode))"
+        Write-Host $w.Output
+        return @{ Passed = $false; Reason = "driver write failed" }
+    }
+    Write-Info "driver write ok, waiting ${ServerPollDelaySec}s for server-side poll"
+    Start-Sleep -Seconds $ServerPollDelaySec
+
+    $r = Invoke-Cli -Cli $OpcUaCli -Args @("read", "-u", $OpcUaUrl, "-n", $OpcUaNodeId)
+    if ($r.ExitCode -ne 0) {
+        Write-Fail "OPC UA client read failed (exit=$($r.ExitCode))"
+        Write-Host $r.Output
+        return @{ Passed = $false; Reason = "opc-ua read failed" }
+    }
+
+    if ($r.Output -match "Value:\s+$([Regex]::Escape($ExpectedValue))\b") {
+        Write-Pass "server-side read equals $ExpectedValue"
+        return @{ Passed = $true }
+    }
+    Write-Fail "server-side value mismatch — expected $ExpectedValue"
+    Write-Host $r.Output
+    return @{ Passed = $false; Reason = "bridge value mismatch" }
+}
+
+# ---------------------------------------------------------------------------
+# Summary helper — caller passes an array of test results.
+# ---------------------------------------------------------------------------
+
+function Write-Summary {
+    param(
+        [Parameter(Mandatory)] [string]$Title,
+        [Parameter(Mandatory)] [array]$Results
+    )
+    $passed = ($Results | Where-Object { $_.Passed }).Count
+    $failed = ($Results | Where-Object { -not $_.Passed }).Count
+    Write-Host ""
+    Write-Host "=== $Title summary: $passed/$($Results.Count) passed ===" `
+        -ForegroundColor $(if ($failed -eq 0) { "Green" } else { "Red" })
+}