Auto: focas-f3a — cnc_rdalmhistry alarm-history extension

Adds FocasAlarmProjection with two modes (ActiveOnly default, ActivePlusHistory)
that polls cnc_rdalmhistry on connect + on a configurable cadence (5 min default,
HistoryDepth=100 capped at 250). Emits historic events via IAlarmSource with
SourceTimestampUtc set from the CNC's reported timestamp; dedup keyed on
(OccurrenceTime, AlarmNumber, AlarmType). Ships the ODBALMHIS packed-buffer
decoder + encoder in Wire/FocasAlarmHistoryDecoder.cs and threads
ReadAlarmHistoryAsync through IFocasClient (default no-op so existing transport
variants stay back-compat). FocasDriver now implements IAlarmSource.

13 new unit tests cover: mode switch, dedup, distinct-timestamp emission,
type-as-key behaviour, OccurrenceTime passthrough (not Now), HistoryDepth
clamp/fallback, and decoder round-trip. All 341 FOCAS unit tests still pass.

Docs: docs/drivers/FOCAS.md (new), docs/v2/focas-deployment.md (new),
docs/v2/implementation/focas-wire-protocol.md (new),
docs/v2/implementation/focas-simulator-plan.md (new),
docs/drivers/FOCAS-Test-Fixture.md (alarm-history bullet appended).

Closes #267

docs/v2/focas-deployment.md

@@ -0,0 +1,45 @@
+# FOCAS deployment guide
+
+Per-driver runbook for deploying the FANUC FOCAS driver. See
+[`docs/drivers/FOCAS.md`](../drivers/FOCAS.md) for the per-feature
+reference and [`focas-version-matrix.md`](./focas-version-matrix.md) for
+the per-CNC-series capability surface.
+
+## Operator config-knob cheat sheet
+
+| Knob | Where | Default | Notes |
+| --- | --- | --- | --- |
+| `Devices[].HostAddress` | `FocasDriverOptions.Devices` | — | `focas://{ip}[:{port}]` |
+| `Devices[].Series` | `FocasDriverOptions.Devices` | `Unknown` | Drives per-series range validation in `FocasCapabilityMatrix`. |
+| `Devices[].OverrideParameters` | `FocasDriverOptions.Devices` | `null` | MTB-specific parameter numbers for Feed/Rapid/Spindle/Jog overrides. `null` suppresses the `Override/` subtree. |
+| `Probe.Enabled` | `FocasDriverOptions.Probe` | `true` | Background reachability probe. |
+| `Probe.Interval` | `FocasDriverOptions.Probe` | `00:00:05` | Probe cadence. |
+| `FixedTree.ApplyFigureScaling` | `FocasDriverOptions.FixedTree` | `true` | Divide position values by 10^decimal-places (issue #262). |
+| **`AlarmProjection.Mode`** | **`FocasDriverOptions.AlarmProjection`** | **`ActiveOnly`** | **`ActiveOnly` keeps today's behaviour. `ActivePlusHistory` polls `cnc_rdalmhistry` on connect + on `HistoryPollInterval` ticks (issue #267, plan PR F3-a).** |
+| **`AlarmProjection.HistoryPollInterval`** | **`FocasDriverOptions.AlarmProjection`** | **`00:05:00`** | **Cadence of the history poll. Operator dashboards run the default; high-frequency rigs can drop to 30 s.** |
+| **`AlarmProjection.HistoryDepth`** | **`FocasDriverOptions.AlarmProjection`** | **`100`** | **Most-recent-N ring-buffer entries pulled per poll. Hard-capped at `250` so misconfigured values can't blast the wire session.** |
+
+## Sample `appsettings.json` snippet for `ActivePlusHistory`
+
+```jsonc
+{
+  "Drivers": {
+    "FOCAS": {
+      "Devices": [
+        { "HostAddress": "focas://10.0.0.5:8193", "Series": "Series30i" }
+      ],
+      "AlarmProjection": {
+        "Mode": "ActivePlusHistory",
+        "HistoryPollInterval": "00:05:00",
+        "HistoryDepth": 100
+      }
+    }
+  }
+}
+```
+
+The history projection emits each unseen entry through
+`IAlarmSource.OnAlarmEvent` with `SourceTimestampUtc` set from the CNC's
+reported wall-clock — keep CNC clocks on UTC so the dedup key
+`(OccurrenceTime, AlarmNumber, AlarmType)` stays stable across DST
+transitions.