refactor(driver-ablegacy): extract AbLegacyDriverOptions to .Contracts

Move AbLegacyDriverOptions, AbLegacyDataType enum, and
AbLegacyPlcFamilyProfile (including AbLegacyPlcFamily enum) to a new
Driver.AbLegacy.Contracts sibling project. All three files are zero-dep
after splitting AbLegacyDataTypeExtensions (which uses DriverDataType
from Core.Abstractions) into a new file that stays in the runtime driver.

Drop the doc-comment <see cref="AbLegacyAddress.TryParse"/> reference and
replace with <c>AbLegacyAddress.TryParse</c> per the approved decision.
The PlcFamilies using directive is retained in the contracts project since
both namespaces live there.

The runtime Driver.AbLegacy project gains a ProjectReference to .Contracts;
the .slnx is updated accordingly.

src/Drivers/ZB.MOM.WW.OtOpcUa.Driver.AbLegacy.Contracts/AbLegacyDataType.cs

@@ -0,0 +1,27 @@
+namespace ZB.MOM.WW.OtOpcUa.Driver.AbLegacy;
+
+/// <summary>
+///     PCCC data types that map onto SLC / MicroLogix / PLC-5 files. Narrower than Logix — no
+///     symbolic UDTs; every type is file-typed and fixed-width.
+/// </summary>
+public enum AbLegacyDataType
+{
+    /// <summary>B-file single bit (<c>B3:0/0</c>) or bit-within-N-file (<c>N7:0/3</c>).</summary>
+    Bit,
+    /// <summary>N-file integer (signed 16-bit).</summary>
+    Int,
+    /// <summary>L-file long integer — SLC 5/05+ only (signed 32-bit).</summary>
+    Long,
+    /// <summary>F-file float (32-bit IEEE-754).</summary>
+    Float,
+    /// <summary>A-file analog integer — some older hardware (signed 16-bit, semantically like N).</summary>
+    AnalogInt,
+    /// <summary>ST-file string (82-byte fixed-length + length word header).</summary>
+    String,
+    /// <summary>Timer sub-element — caller addresses <c>.ACC</c>, <c>.PRE</c>, <c>.EN</c>, <c>.DN</c>, <c>.TT</c>.</summary>
+    TimerElement,
+    /// <summary>Counter sub-element — caller addresses <c>.ACC</c>, <c>.PRE</c>, <c>.CU</c>, <c>.CD</c>, <c>.DN</c>.</summary>
+    CounterElement,
+    /// <summary>Control sub-element — caller addresses <c>.LEN</c>, <c>.POS</c>, <c>.EN</c>, <c>.DN</c>, <c>.ER</c>.</summary>
+    ControlElement,
+}

src/Drivers/ZB.MOM.WW.OtOpcUa.Driver.AbLegacy.Contracts/AbLegacyDriverOptions.cs

@@ -0,0 +1,56 @@
+using ZB.MOM.WW.OtOpcUa.Driver.AbLegacy.PlcFamilies;
+
+namespace ZB.MOM.WW.OtOpcUa.Driver.AbLegacy;
+
+/// <summary>
+///     AB Legacy (PCCC) driver configuration. One instance supports N devices (SLC 500 /
+///     MicroLogix / PLC-5 / LogixPccc). Per plan decision #41 AbLegacy ships separately from
+///     AbCip because PCCC's file-based addressing (<c>N7:0</c>) and Logix's symbolic addressing
+///     (<c>Motor1.Speed</c>) pull the abstraction in different directions.
+/// </summary>
+public sealed class AbLegacyDriverOptions
+{
+    /// <summary>Gets or sets the list of PCCC devices to connect to.</summary>
+    public IReadOnlyList<AbLegacyDeviceOptions> Devices { get; init; } = [];
+
+    /// <summary>Gets or sets the list of PCCC tag definitions.</summary>
+    public IReadOnlyList<AbLegacyTagDefinition> Tags { get; init; } = [];
+
+    /// <summary>Gets or sets the probe (connectivity check) options.</summary>
+    public AbLegacyProbeOptions Probe { get; init; } = new();
+
+    /// <summary>Gets or sets the default timeout for read/write operations.</summary>
+    public TimeSpan Timeout { get; init; } = TimeSpan.FromSeconds(2);
+}
+
+public sealed record AbLegacyDeviceOptions(
+    string HostAddress,
+    AbLegacyPlcFamily PlcFamily = AbLegacyPlcFamily.Slc500,
+    string? DeviceName = null);
+
+/// <summary>
+///     One PCCC-backed OPC UA variable. <paramref name="Address"/> is the canonical PCCC
+///     file-address string that parses via <c>AbLegacyAddress.TryParse</c>.
+/// </summary>
+public sealed record AbLegacyTagDefinition(
+    string Name,
+    string DeviceHostAddress,
+    string Address,
+    AbLegacyDataType DataType,
+    bool Writable = true,
+    bool WriteIdempotent = false);
+
+public sealed class AbLegacyProbeOptions
+{
+    /// <summary>Gets or sets a value indicating whether connectivity probing is enabled.</summary>
+    public bool Enabled { get; init; } = true;
+
+    /// <summary>Gets or sets the interval between probe attempts.</summary>
+    public TimeSpan Interval { get; init; } = TimeSpan.FromSeconds(5);
+
+    /// <summary>Gets or sets the timeout for each probe operation.</summary>
+    public TimeSpan Timeout { get; init; } = TimeSpan.FromSeconds(2);
+
+    /// <summary>Gets or sets the probe address (defaults to <c>S:0</c> — status file, first word).</summary>
+    public string? ProbeAddress { get; init; } = "S:0";
+}

src/Drivers/ZB.MOM.WW.OtOpcUa.Driver.AbLegacy.Contracts/AbLegacyPlcFamilyProfile.cs

@@ -0,0 +1,66 @@
+namespace ZB.MOM.WW.OtOpcUa.Driver.AbLegacy.PlcFamilies;
+
+/// <summary>
+///     Per-family libplctag defaults for PCCC PLCs. SLC 500 / MicroLogix / PLC-5 / LogixPccc
+///     (Logix controller accessed via the PLC-5 compatibility layer — rare but real).
+/// </summary>
+public sealed record AbLegacyPlcFamilyProfile(
+    string LibplctagPlcAttribute,
+    string DefaultCipPath,
+    int MaxTagBytes,
+    bool SupportsStringFile,
+    bool SupportsLongFile)
+{
+    /// <summary>Gets the profile for the specified PLC family.</summary>
+    /// <param name="family">The PLC family.</param>
+    public static AbLegacyPlcFamilyProfile ForFamily(AbLegacyPlcFamily family) => family switch
+    {
+        AbLegacyPlcFamily.Slc500 => Slc500,
+        AbLegacyPlcFamily.MicroLogix => MicroLogix,
+        AbLegacyPlcFamily.Plc5 => Plc5,
+        AbLegacyPlcFamily.LogixPccc => LogixPccc,
+        _ => Slc500,
+    };
+
+    public static readonly AbLegacyPlcFamilyProfile Slc500 = new(
+        LibplctagPlcAttribute: "slc500",
+        DefaultCipPath: "1,0",
+        MaxTagBytes: 240,           // SLC 5/05 PCCC max packet data
+        SupportsStringFile: true,   // ST file available SLC 5/04+
+        SupportsLongFile: true);    // L file available SLC 5/05+
+
+    public static readonly AbLegacyPlcFamilyProfile MicroLogix = new(
+        LibplctagPlcAttribute: "micrologix",
+        DefaultCipPath: "",         // MicroLogix 1100/1400 use direct EIP, no backplane path
+        MaxTagBytes: 232,
+        SupportsStringFile: true,
+        SupportsLongFile: false);   // ML 1100/1200/1400 don't ship L files
+
+    public static readonly AbLegacyPlcFamilyProfile Plc5 = new(
+        LibplctagPlcAttribute: "plc5",
+        DefaultCipPath: "1,0",
+        MaxTagBytes: 240,           // DF1 full-duplex packet limit at 264 bytes, PCCC-over-EIP caps lower
+        SupportsStringFile: true,
+        SupportsLongFile: false);   // PLC-5 predates L files
+
+    /// <summary>
+    ///     Logix ControlLogix / CompactLogix accessed through the legacy PCCC compatibility layer.
+    ///     Rare but real — some legacy HMI integrations address Logix controllers as if they were
+    ///     PLC-5 via the PCCC-passthrough mechanism.
+    /// </summary>
+    public static readonly AbLegacyPlcFamilyProfile LogixPccc = new(
+        LibplctagPlcAttribute: "logixpccc",
+        DefaultCipPath: "1,0",
+        MaxTagBytes: 240,
+        SupportsStringFile: true,
+        SupportsLongFile: true);
+}
+
+/// <summary>Which PCCC PLC family the device is.</summary>
+public enum AbLegacyPlcFamily
+{
+    Slc500,
+    MicroLogix,
+    Plc5,
+    LogixPccc,
+}

src/Drivers/ZB.MOM.WW.OtOpcUa.Driver.AbLegacy.Contracts/ZB.MOM.WW.OtOpcUa.Driver.AbLegacy.Contracts.csproj

@@ -0,0 +1,9 @@
+<Project Sdk="Microsoft.NET.Sdk">
+    <PropertyGroup>
+        <TargetFramework>net10.0</TargetFramework>
+        <Nullable>enable</Nullable>
+        <ImplicitUsings>enable</ImplicitUsings>
+        <TreatWarningsAsErrors>true</TreatWarningsAsErrors>
+    </PropertyGroup>
+    <!-- NO PackageReference. -->
+</Project>