fefbbb31da47ff33db4af4cba6120bc826216006
4 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Joseph Doherty
|
95c108f1d7 |
fix(localdb): allowlist the replication meter + record the Task 12 live gate
Task 12 (live gate on the docker rig) found one real defect, which this fixes.
THE DEFECT. The plan asserted LocalDb metrics "need no work - the
ZB.MOM.WW.LocalDb.Replication meter flows through the existing AddZbTelemetry
Prometheus export". It does not. ZbTelemetryOptions.Meters is an ALLOWLIST: an
unlisted meter's instruments are never observed, with no error, no warning, and
no missing-metric signal anywhere. The rig's /metrics scrape returned 301 lines
and zero localdb_* series. Only looking for them found it.
Fixed by hoisting the allowlist to SiteServiceRegistration.ObservedMeters and
adding LocalDbMetrics.MeterName. The pin test asserts on that constant rather
than on OTel's observed set, because AddZbTelemetry applies its options to a
local instance and never registers IOptions - there is nothing resolvable to
interrogate. The end-to-end proof is the live scrape below; the test exists to
stop the entry being dropped again. Called out as such in the test.
LIVE GATE EVIDENCE (docker rig, 8 nodes, rebuilt via docker/deploy.sh):
1. Consolidated DB created on every site node at /app/data/site-localdb.db -
inside the mounted volume, unlike the legacy CWD-relative databases.
2. Replication proven REAL, not two independent local writes. Both site-a nodes
hold the identical row and, decisively, the identical originating node_id and
HLC in __localdb_row_version:
site_events|{"id":"8b06b37c..."}|116946936661147648|65b00319-...|0
__localdb_peer_state shows a completed handshake in both directions.
3. Convergence: 5/5 events on both nodes, __localdb_row_version byte-identical
across the pair, oplog drained to 0, dead_letter 0 on both.
4. SITE failover drill. Note the repo's failover-drill.sh targets CENTRAL nodes
and does not exercise this claim, so the site-pair flip was run directly:
stopped site-a-a (the node holding the history); site-a-b survived with the
complete pre-flip history (3/3 events) plus its own takeover event. Restarted
site-a-a; it caught up on what it missed and both nodes reconverged to the
same 5 ids. This is the failure Phase 1 exists to prevent.
5. localdb_* now exported after the fix:
localdb_sync_reconnects_total{...} 1
localdb_oplog_depth{...} 0
6. DEFAULT-OFF pin, live and side-by-side: site-b (no Replication section) boots
identically, creates its consolidated DB, registers the engine - and stays
inert. Zero replication log lines, no reconnect counter at all, so it never
dialled anything.
One transient WRN at startup on site-a-a ("Connection refused", reconnecting) is
node A dialling before node B's listener was up; it reconnected within a second.
Expected for a pair that starts together.
Verified: build 0 warnings; Host wiring tests 11/11.
Claude-Session: https://claude.ai/code/session_01BL2Vu1ESDQ9SCN4gVKkdts
|
||
|
Joseph Doherty
|
59c695191c |
feat(localdb): fail-closed auth on the sync endpoint + replication health signal
Tasks 8 and 9 of the LocalDb Phase 1 adoption plan.
Task 8 - LocalDbSyncAuthInterceptor. The replication library's LocalDbSyncService
verifies nothing; inbound auth is explicitly the host's job. Without this,
anything able to reach a site node's gRPC port could stream arbitrary rows into
the consolidated site database - including OperationTracking, which central
reconciles from.
Scoped strictly to /localdb_sync.v1.LocalDbSync/; SiteStream shares the same
AddGrpc pipeline and passes through untouched. Fail-closed: with no
LocalDb:Replication:ApiKey configured NO sync stream is accepted, authenticated
or not. That is deliberate - "no key" is the default every site node ships with,
so treating it as "no auth required" would expose the endpoint on precisely the
most common configuration. Comparison is FixedTimeEquals over UTF-8 bytes.
All four server handler shapes are gated, not just unary: the sync RPC is a
bidirectional stream, so gating only the unary path would leave the real endpoint
open while every unary test still passed. There is a test for that.
Deviation from the plan: it specified Grpc.Core.Testing for the fake
ServerCallContext. That type ships in the retired native Grpc.Core package and
does not exist on the grpc-dotnet stack this solution uses; a minimal
FakeServerCallContext in the test file was the better trade than adding a dead
dependency.
Task 9 - ISyncStatus onto the site health report as LocalDbReplicationConnected
and LocalDbOplogBacklog, via a delegate-seam hosted service following the
AddSiteEventLogHealthMetricsBridge precedent (HealthMonitoring takes no reference
on the replication library). Both are additive init properties, so the
Akka-remoted SiteHealthReport constructor signature is untouched.
Both fields are nullable and the distinction is load-bearing:
- null = the reporter has not run / replication is not wired ("no data");
- false/0 = a real reading. On a node with no peer that IS the healthy
default-OFF state, not an outage.
OplogBacklog is passed through nullable end-to-end because ISyncStatus returns
null when the poll fails - flattening it to 0 would report a replication pair
that cannot read its own oplog as perfectly healthy. The collector stores both
values as one tuple and CollectReport reads it once, so a torn read cannot pair a
fresh Connected with a stale backlog.
Verified: build 0 warnings; Host 307/307 (8 interceptor + 3 health tests new),
HealthMonitoring 97/97, Commons 684/684.
Claude-Session: https://claude.ai/code/session_01BL2Vu1ESDQ9SCN4gVKkdts
|
||
|
Joseph Doherty
|
a560e9eaf9 |
feat(localdb): wire 2-node replication for the site database, default OFF
Task 7 of the LocalDb Phase 1 adoption plan.
AddZbLocalDbReplication registers the engine; MapZbLocalDbSync exposes the
passive endpoint the peer node dials. Both are unconditional but INERT by
default: with no LocalDb:Replication:PeerAddress the initiating
SyncBackgroundService starts and immediately idles, and nothing dials the
endpoint. A site pair replicates only once an operator sets a peer on BOTH
nodes. The endpoint shares the Kestrel h2c listener the site gRPC server already
uses, so there are no listener or port changes.
Deviation from the plan: it put AddZbLocalDbReplication in Program.cs. Doing so
would have left it untested - the composition-root tests build
SiteServiceRegistration's graph, not Program.cs - so a registration that silently
went missing would still show green. It now sits next to AddZbLocalDb in
SiteServiceRegistration, where the DI-graph tests actually cover it.
MapZbLocalDbSync stays in Program.cs because it needs the WebApplication.
Two pins added to SiteLocalDbWiringTests, which configures no peer:
- the engine resolves and is idle (not connected, no peer, never synced) -
default-off means inert, not unregistered;
- OplogBacklog is 0, not null. It is deliberately nullable so a failed poll
reads as "unknown" instead of a healthy zero; a real 0 proves the provider is
wired to the oplog, which Task 9's health signal depends on.
Inbound auth on the sync endpoint is Task 8. Until that lands the endpoint is
unauthenticated - which is precisely why replication ships default-OFF and no
config in this repo sets a peer.
Verified: build 0 warnings; Host 296/296, SiteEventLogging 70/70,
SiteRuntime 530/530, Commons 684/684, Communication 312/312.
Claude-Session: https://claude.ai/code/session_01BL2Vu1ESDQ9SCN4gVKkdts
|
||
|
Joseph Doherty
|
2977e6c45c |
feat(localdb): register the consolidated site database in the composition root
Task 3. Site nodes now open one ZB.MOM.WW.LocalDb-managed database holding OperationTracking and site_events as replicated tables. SiteLocalDbSetup.OnReady applies both schemas and then RegisterReplicated's them. That order is load-bearing and easy to get silently wrong: capture is trigger-based CDC, so rows written before registration are never captured or snapshotted - they would be invisible to the peer forever, with no error anywhere. Storage ships UNCONDITIONALLY, no feature flag. With no peer configured LocalDb is just a local SQLite file, so this is behaviour-equivalent to what site nodes do today. Replication is opt-in and lands in Program.cs (Task 7), which owns the gRPC host the sync endpoint needs. Config: LocalDb:Path added to all EIGHT site-node appsettings (the plan said six - docker-env2's site-x pair exists too), plus the dev template and the wonder-app-vd03 production sample. All ten are required, not optional: LocalDbOptions.Path is validated with ValidateOnStart, so a site node without it fails fast at startup. That is the desired posture, and it is what caught ActorPathTests - the one Host fixture that actually starts a host - whose config now sets the path too. Note the path choice fixes an existing data-loss bug in passing: site-tracking.db and site_events.db both defaulted to CWD-relative paths (/app/...), outside the mounted volume, so they were silently lost on every container recreate. The consolidated database lives on /app/data. Tests are container-built against the REAL SiteServiceRegistration.Configure, not a hand-assembled ServiceCollection - this family has shipped three wiring defects that only a real graph would catch (inert Secrets replicator 0.2.0, singleton deadlock 0.2.2, Secrets.Ui missing IAuditWriter). They assert the library's own view of what is registered rather than that we called the right method. Verified (all after the change): dotnet build ZB.MOM.WW.ScadaBridge.slnx -> 0 Error(s), 0 Warning(s) Host.Tests -> 294 passed (5 new, red-first) SiteRuntime.Tests -> 530 passed CentralUI.Tests -> 925 passed Commons.Tests -> 684 passed Communication.Tests -> 312 passed SiteEventLogging.Tests-> 70 passed Claude-Session: https://claude.ai/code/session_01BL2Vu1ESDQ9SCN4gVKkdts |