The site's deployed_configurations rows are the durable truth about what should be
running; the set of live Instance Actors is what IS running. Nothing kept the two in
agreement after boot, and nothing surfaced a disagreement.
Row 78 (availability, proven live 2026-08-15) -- deployed_configurations is one of
LocalDb's ten replicated tables, so on a replicated pair a config can appear in a
node's file with no local actor involved at all: the CDC sync applier writes the row
directly. Live sequence: site-a-b's reconcile fetched 4 configs at its solo boot; the
pair was then restarted with a fresh site-a-a file and snapshot replication seeded
site-a-a's table within ~5s -- AFTER its boot-time load had read an empty table, and
invisibly to its own reconcile (central rightly reported "0 fetched", because central's
view of the site was correct). Enabled instances sat dead with their configs present
until yet another restart. Row 67's EnsureInstanceStartedCommand only covers configs
the reconcile itself FETCHES; this is the same gap through a side door.
Row 72 (silent divergence) -- for a STALE ReconcileGapItem the pass writes the newer
config via StoreDeployedConfigIfNewerAsync, a pure file write, while the running
Instance Actor keeps executing the previously compiled config until the next restart
or redeploy. Nothing said "stored revision != running revision".
Both are closed by one periodic sweep owned by the Deployment Manager singleton
(ScadaBridge:SiteRuntime:InstanceSweepIntervalSeconds, default 60, validated >= 0;
0 disables). Each tick re-reads the durable rows off-thread and, on the actor thread,
for every ENABLED stored config either starts a missing Instance Actor (row 78) or --
when the running one's revision no longer matches the stored one -- re-applies the
stored config through the ordinary redeploy path (row 72).
A sweep was chosen over a LocalDb change hook deliberately: a hook covers only the
replication arrival path, and only on the half of the fleet running with replication
enabled, whereas the sweep is arrival-path-agnostic (replication seeding, post-boot
snapshot resync, a hand-restored file, any future path). It is also not available --
ILocalDb 0.3.0 exposes no change-notification or applied-rows callback, so a hook would
mean a new upstream capability in scadaproj plus an in-process bus into this singleton,
a cross-repo change to close a site-local gap.
Row 72's decision is to CONVERGE, not merely warn. The stored row is what central
successfully deployed; an actor serving the config central believes was replaced is the
actual fault, and a surface-only warning leaves the operator to issue by hand exactly
the redeploy the sweep would have performed. Reusing HandleDeploy means the compile
gate, warm-then-gate ordering, redeploy-supersede, the static-override / native-alarm
reset and all-or-nothing-per-instance are the production ones, not a second
implementation -- and a stop still does NOT cancel an in-flight script run, exactly as
for a central redeploy.
Guards, shared with row 67 via the extracted InstanceIsOwnedByADeployPipeline predicate
and the shared StartStoredInstance helper:
- a DISABLED instance is never started (config row, no actor is its correct state);
- the sweep defers to any deploy pipeline owning the instance (compile warm in flight,
predecessor still terminating, deployment awaiting its persistence/init join), so it
can never interleave with a real redeploy -- that window has the config stored and no
actor, which an unguarded sweep would answer by creating a child whose actor name is
still registered;
- inert until boot-time Instance Actor creation has finished, so a tick between
staggered batches does not "heal" instances the boot load is about to create;
- ONE repair attempt per (instance, revision) pair -- this is what stops a periodic
self-heal becoming a restart loop for an actor that dies during init, or for a stored
config the compile gate rejects (a rejection leaves the running instance untouched:
the gate returns before anything is stopped);
- reads never overlap, so a slow read cannot stack ticks into duplicate repairs.
A sweep that finds nothing is completely silent -- no log above Trace, no site event.
A repair emits the same Warning `deployment` site-event pattern as row 67 with the
trigger named ("deployment-manager sweep self-heal") so it is distinguishable from a
startup-reconcile heal; a stale-revision restart names BOTH revisions and a rejected
one adds an Error event. The synthetic redeploy replies to the singleton itself rather
than NoSender, because dead letters are a monitored site health metric.
CreateInstanceActor gains a revisionHash parameter and is the single creation funnel
that records it, so the stale check covers every path that can start an Instance Actor;
a missing entry reads as "unknown", never "stale", so a future path bypassing the funnel
degrades to no-op rather than to spurious restarts.
Fail-before by behavioral revert (sweep timer left unarmed): 5 of 10 new tests fail,
including both live symptoms -- the row-78 repro ("A replication-seeded config for an
enabled instance left no running Instance Actor") and the row-72 repro, whose snapshot
still shows the rev-1 value 111 while the store holds rev-2's 222. The 5 negative
guards (disabled / in-flight redeploy / matching revisions / silent-when-healthy /
interval-zero) are green in both states, as they must be.
SiteRuntime 626/626, Host 505/505, AuditLog 383/383.
Design note: docs/plans/2026-08-15-instance-sweep-self-heal-design.md
Implements WP3.2 stage (b) per docs/plans/2026-08-15-site-events-policy-design.md.
- Per-run instance-script Started/Completed Info site events are now off by
default (SiteRuntimeOptions.PerRunScriptEvents=false) instead of firing on
every run, closing the dominant site_events writer. Gated at the ScriptRunLauncher
call sites (moved there from ScriptExecutionActor by WP3.1). Error-level events
(timeout/failure/stuck-watchdog/recursion-limit) remain unconditional.
- ScriptRunSummaryRecorder accumulates per-(instance, script) run counters and a
new site-only ScriptRunSummaryFlushService emits one aggregate "script" Info
site event per ScriptRunSummaryIntervalSeconds (default 300s), top-50-script
breakdown with an "others" rollup, zero-activity intervals emit nothing.
- Per-script opt-in via PerRunScriptEventScripts ("Instance/Script" exact or
"Instance/*" wildcard), matched by the new pure ScriptRunEventPolicy. All three
options are read from IOptionsMonitor<SiteRuntimeOptions> per run, so the
policy is hot-togglable without a restart.
- Fixed the stale "event log is not replicated" comment at AkkaHostedService.cs
(~905): site_events IS registered in SiteLocalDbSetup.ReplicatedTables — the
singleton is what makes queries always hit the actively-written copy;
replication is what gives the singleton history to read after a failover
(memo Decision (b)). site_events replication itself is unchanged (still
registered) and already pinned by
tests/ZB.MOM.WW.ScadaBridge.Host.Tests/SiteLocalDbCdcRegistrationTests.cs.
- Updated Component-SiteEventLogging.md (Volume Policy section, corrected
Storage/replication rationale) and Component-SiteRuntime.md (Script Run
Launch + Error Handling sections).
WP2.6 (arch-review remediation, cross-cutting misc):
- SiteExternalSystemRepository: name/ID-indexed ExternalSystemDefinitionCache replaces
the fetch-all + reverse-map scan on every by-ID/method lookup; loaded once per
redeploy, invalidated by DeploymentManagerActor after HandleDeployArtifacts applies
external-system changes. Static JsonSerializerOptions for method-list parsing.
- Inbound API: short-TTL ApiMethodCache fronts the per-request ApiMethod repository
fetch; invalidated by name via the existing ScriptArtifactChangeSubscriber/
IScriptArtifactChangeBus pipeline, self-healing via TTL for changes the bus
doesn't cover (e.g. Management API edits).
- StoreAndForward: the cached-call audit-observer queue — the one unbounded channel
left in the system — is now bounded (ObserverQueueCapacity, default 10,000) with
DropOldest overflow and a dropped-notification counter.
- SiteStreamManager: alarm state changes now travel a dedicated publish
source/broadcast hub, isolated from the (far higher-volume) attribute path, so an
attribute storm can no longer evict a pending alarm transition; the alarm hand-off
queue is bounded with a drop counter surfaced on the site health report
(SiteStreamAlarmDropCount via the new SiteStreamAlarmDropReporter), and publishing
is skipped entirely at zero subscribers on either path.
- CLI ManagementHttpClient: explicit 30s HttpClient.Timeout on the shared
construction (was the 100s framework default), overridable via
SCADABRIDGE_HTTP_TIMEOUT_SECONDS.
Deviation: the failback-probe heartbeat item is NOT included — its only viable
surface (CentralChannelProvider.cs / heartbeat consumers) lives entirely in the
Communication project, explicitly off-limits to this work package this phase.
Tests: SiteRuntime.Tests (550), InboundAPI.Tests (278), StoreAndForward.Tests (133),
CLI.Tests (390), HealthMonitoring.Tests (97) — all green after full solution build.
LocalDb Phase 2 deleted the bespoke replicators, so three config keys changed
meaning or died outright:
- ScadaBridge:StoreAndForward:ReplicationEnabled is fully dead. Deleted the
property, its 10 config entries, and the 5 test references.
- SqliteDbPath / SiteDbPath are now migration-only: they name the legacy files
SiteLocalDbLegacyMigrator drains at boot, not live databases. Both mandatory
rules are relaxed accordingly (StartupValidator's Site-only Require, and the
S&F validator's non-empty rule) — an absent value now means "nothing to
migrate", so an already-migrated node can drop the key. DatabaseOptions-
Validator still rejects a present-but-blank value.
- SiteRuntime:ConfigFetchRetryCount's only reader was SiteReplicationActor.
Deleted with its validator rule.
The two path keys stay present in every config, now with a comment explaining
why: removing them would strand un-migrated data on a node that has not yet
started once.
Both relaxations are pinned by the inverse of the test they replace
(Site_MissingSiteDbPath_IsAccepted..., EmptySqliteDbPath_IsAccepted...), each
verified to fail with the old rule restored.
Note: deploy/wonder-app-vd03/appsettings.Site.json is under a gitignored
deploy/ tree, so its edit is local-only and must be repeated on the box.
Claude-Session: https://claude.ai/code/session_01BL2Vu1ESDQ9SCN4gVKkdts
Joseph Doherty