`DataConnectionManagerActor.HandleCreateConnection` is create-only (warns and
returns for a name it already holds), so `EnsureDclConnection`'s documented
"a changed config re-issues the create so the DCL adopts it" was never true on
ANY node: a corrected endpoint/credential/backup/failover-count took effect only
when the connection was next built from scratch (node restart, singleton
failover, remove-then-re-add), while the DM's hash cache recorded it as applied.
Rows 89/90 made that honest with a Warning; this closes it.
New `ReconfigureConnectionCommand` (Commons, same shape as the create):
- `DeploymentManagerActor.EnsureDclConnection` now has three outcomes off its one
per-name hash slot — unchanged -> nothing at all, new -> create, CHANGED ->
reconfigure — and logs "Reconfigured DCL connection {Connection}
(protocol={Protocol}) in place" at Information in place of the old Warning. The
winner-resolution / arbitration / tombstone logic is untouched; only what
happens after a change is detected changed.
- `DataConnectionManagerActor` FORWARDS the command to the owning connection
actor, falling back to a create for a name it does not hold, so the command is
safe whatever the manager's state.
- `DataConnectionActor` handles it in ALL THREE states and never stashes it — a
connection pointed at a wrong or dead endpoint lives in Connecting/Reconnecting,
which is exactly when a correction arrives; stashed it would wait on the broken
configuration forever. Handling replaces protocol/primary/backup/failover-count,
re-arms endpoint selection to Primary (the new config's primary is the intent,
whatever the old config had failed over to), and calls the new shared
`SwapAdapter` helper — now used by both failover sites too, so the swap exists
once: unhook + fire-and-forget dispose -> _factory.Create -> rewire -> bump
_adapterGeneration LAST. `BecomeReconnecting(afterReconfigure: true)` then
reconnects immediately (StartSingleTimer replaces any armed reconnect, so no
racing attempts) with the unstable-disconnect accounting and failover check
suppressed — the link was dropped on purpose, and counting it as an unstable
cycle could trip a failover onto the NEW backup before the new primary had been
tried once. ReSubscribeAll/ReSubscribeAllAlarms then re-issue everything from
the untouched subscription registries. Idempotent: a reconfigure carrying the
configuration already in force is a no-op.
Stop-and-recreate was rejected as destructive: subscriptions live inside
DataConnectionActor and InstanceActor cancels its subscribe-retry timer on first
success, so a rebuilt actor would have no subscribers and nothing would ever
re-subscribe.
Tests: new DataConnectionReconfigureTests (7; 5 fail / 2 pass against a
behavioural revert). DclConnectionArbitrationTests gains two row-97 tests and its
CDC-arrival test now asserts the second push is a reconfigure; its ping-pong
guard also asserts zero reconfigures, since a flip would now show up there.
SiteRuntime-010 renamed to ..._ReissuesReconfigureCommand. 3 fail against a
reverted EnsureDclConnection. DataConnectionLayer.Tests 327/327,
SiteRuntime.Tests 643/643, solution build 0 warnings.
Docs: Component-DataConnectionLayer.md gains an "In-place reconfiguration"
section under Endpoint Redundancy; Component-SiteRuntime.md, and the
docs/components/ mirrors, updated; the arbitration decision memo gains an
appended §9 postscript resolving its residual 1 (residuals 2 and 3 stay open).
scadabridge_site_connection_up never counted data connections. It counts open
central->site gRPC subscriber streams (Debug View + the site-wide alarm feed),
so it correctly reads 0 on a healthy site nobody is watching — and the name
invited reading it as device health. That misreading has already cost a live
debugging session: register row 48's 'connection_up is 0 on all six site
nodes' was healthy steady state, not the fault it was diagnosed as.
Two halves, per the row:
RENAME. scadabridge.site.connection.up -> scadabridge.site.stream.subscribers.active
(helpers SiteConnectionOpened/Closed -> SiteStreamSubscriberOpened/Closed), and
the instrument gains the unit:"1" the other gauges already carried. Every
reference updated: the gRPC server, both test suites, Component-Communication.md,
components/Commons.md, docker/README.md and docker/seed-live-probe.sh. A test
now pins the new name AND asserts the old one is gone, so it cannot creep back.
NEW. scadabridge.site.data_connections.connected / .total — the first exported
data-connection signal (the state existed on the health report and in the CLI,
but never as a metric). connected < total is the alert condition; neither
number alone separates 'a device is down' from 'nothing is configured', which
is why the denominator ships with the numerator.
Sourcing is deliberate on two counts. It is fed by the DCL at its four state
transitions rather than derived from the health report, so the metric survives
a dead report pipeline — the exact failure the 'metrics stale' flag exists to
catch, and a derived gauge would go blind at the same moment. And it uses a
static registry reached through ScadaBridgeTelemetry (the SiteConnectionOpened
precedent) rather than a DI-injected holder: the DCL actors already take
ISiteHealthCollector through their constructors, and threading a second
dependency through both would ripple into every test that builds them. It also
keeps SiteHealthCollector untouched, which matters right now — another agent is
concurrently editing that file for the tag-resolution path.
Removal is wired too: an undeployed connection leaves the registry, so it stops
counting toward the total instead of latching connected < total on forever.
Both gauges read 0 on the standby (connections open on the active node only) —
healthy, documented, and called out in the docs so it does not become the next
site_connection_up.
No ObservedMeters allowlist change: all three instruments ride the existing
ZB.MOM.WW.ScadaBridge meter. (An unlisted meter exports nothing, silently.)
Tests: Commons 711 passed (9 new, delta-based against a baseline with unique
per-test connection names, so they do not inherit the register row 32
QueueDepthGaugeTests static-state flake); Communication 717; DCL 319.
Remove project bookkeeping citations from shipped code comments across the
solution: hyphenated task IDs (WP-14, StoreAndForward-025), milestone/task/
issue refs (M3, Task 4, Audit Log #23, #21), Bundle X task-bundle labels,
and C/D/K/S/T phase labels.
Comment text only — no code logic, string/log literals, or XML-doc structure
changed. Genuine descriptions are preserved (only the citation is stripped),
and technical lookalikes are retained (UTF-8, SHA-256, T00:00:00, M365,
UTC-5, pre-C4/pre-C5 schema versions). Flagged by the new CommentChecker
TaskReferenceInComment / TrackingReferenceInComment checks plus targeted
grep passes; full solution builds clean, append-only guard tests pass.
The NativeAlarmActor sends SubscribeAlarmsRequest to the DCL manager, but the
manager only routed tag/write/browse messages to the per-connection
DataConnectionActor — alarm subscribe/unsubscribe were unhandled and dead-lettered,
so native alarms never subscribed at runtime. Caught by live T28 deployment.
Mirrors the existing HandleRoute forwarding.
Adds a Test Bindings button to the Connection Bindings table on the Configure
Instance page that opens a modal showing the live current value of every bound
attribute. Reuses the routing path that the OPC UA tag browser landed on:
Central: TestBindingsDialog → IBindingTester → CommunicationService
→ ReadTagValuesCommand → SiteEnvelope (Ask)
Site: SiteCommunicationActor → DeploymentManagerActor singleton
→ DataConnectionManagerActor → child DataConnectionActor
→ _adapter.ReadBatchAsync
Split mirrors the browse handler:
• Manager owns ConnectionNotFound (only it sees the per-site connection set).
• Child owns ConnectionNotConnected (pre-call status check, never stash —
read is interactive design-time), Timeout (OperationCanceledException),
ServerError (any other exception). Per-tag failures from ReadBatchAsync
become failure TagReadOutcomes without aborting the batch.
CentralUI:
• IBindingTester / BindingTester — Design-role guard via HasClaim against
JwtTokenService.RoleClaimType (not IsInRole — see c1e16cf), typed
transport-failure translation.
• TestBindingsDialog — ShowAsync(siteId, rows, instanceLabel) method-arg
pattern (no Razor parameter race; see 2c138b6), groups rows by connection
and issues one ReadAsync per connection in parallel, per-row error subline
+ per-connection banner, Refresh button re-issues the reads.
• InstanceConfigure.razor — Test Bindings button next to Save Bindings,
disabled when no testable rows. OPC UA only today (other protocols have
no ReadTagValuesCommand wiring yet).
Tests:
• Commons: ReadTagValuesCommand discovered by ManagementCommandRegistry.
• DataConnectionLayer: unknown connection → ConnectionNotFound,
not-connected adapter → ConnectionNotConnected (ReadBatchAsync NOT called),
success-path mapping (Good/Bad + per-tag error), cancellation → Timeout.
• CentralUI: register IBindingTester (and the previously-missing
IOpcUaBrowseService) on the existing InstanceConfigureAuditDrillinTests
Bunit container so the page renders cleanly with the new dialog.
- BrowseOpcUaNodeCommand: int DataConnectionId -> string ConnectionName
(site DataConnectionManagerActor indexes children by name; CentralUI
already has the connection name in scope via the dropdown — no extra
plumbing across the trust boundary).
- IOpcUaBrowseService / OpcUaBrowseService: parameter renamed accordingly.
- OpcUaBrowserDialog: collapse the duplicate ConnectionName parameters
(display label and routing key are the same string).
- Task 10: DataConnectionManagerActor forwards BrowseOpcUaNodeCommand to
its child by name (owns ConnectionNotFound); DataConnectionActor adds
the receive across all three lifecycle states (Connecting / Connected
/ Reconnecting) and maps adapter outcomes to BrowseFailureKind
(NotBrowsable / ConnectionNotConnected / Timeout / ServerError).
- Task 17: SetFailure in OpcUaBrowserDialog implements the full
BrowseFailureKind switch with friendly UI messages.
- Tests: DataConnectionManagerBrowseHandlerTests covers ConnectionNotFound,
NotBrowsable, success, and ConnectionNotConnectedException paths.
Joseph Doherty